Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.17-gentoo (root@laptop) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #20 SMP Sun Dec 8 13:51:20 CET 2013
- [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.10.17-gentoo root=/dev/sda3 ro
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008e097fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008e098000-0x000000008e21dfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008e21e000-0x000000008e242fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000008e243000-0x000000008e5affff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000008e5b0000-0x000000008ef5afff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008ef5b000-0x000000008ef5bfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008ef5c000-0x000000008f15efff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000008f15f000-0x000000008f542fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008f543000-0x000000008f7f0fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008f7f1000-0x000000008f7fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000024effffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: ASUSTeK COMPUTER INC. K55DR/K55DR, BIOS 217 09/07/2012
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF write-through
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFF0000000 write-back
- [ 0.000000] 2 base 00008F800000 mask FFFFFF800000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 000000024f000000 aka 9456M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0x8f800000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0x8f800 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fd4d0-0x000fd4df] mapped at [ffff8800000fd4d0]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x020d2000, 0x020d2fff] PGTABLE
- [ 0.000000] BRK [0x020d3000, 0x020d3fff] PGTABLE
- [ 0.000000] BRK [0x020d4000, 0x020d4fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x24ee00000-0x24effffff]
- [ 0.000000] [mem 0x24ee00000-0x24effffff] page 2M
- [ 0.000000] BRK [0x020d5000, 0x020d5fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x24c000000-0x24edfffff]
- [ 0.000000] [mem 0x24c000000-0x24edfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x200000000-0x24bffffff]
- [ 0.000000] [mem 0x200000000-0x23fffffff] page 1G
- [ 0.000000] [mem 0x240000000-0x24bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x8e097fff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0x8dffffff] page 2M
- [ 0.000000] [mem 0x8e000000-0x8e097fff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x8ef5b000-0x8ef5bfff]
- [ 0.000000] [mem 0x8ef5b000-0x8ef5bfff] page 4k
- [ 0.000000] BRK [0x020d6000, 0x020d6fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x8f15f000-0x8f542fff]
- [ 0.000000] [mem 0x8f15f000-0x8f1fffff] page 4k
- [ 0.000000] [mem 0x8f200000-0x8f3fffff] page 2M
- [ 0.000000] [mem 0x8f400000-0x8f542fff] page 4k
- [ 0.000000] BRK [0x020d7000, 0x020d7fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x8f7f1000-0x8f7fffff]
- [ 0.000000] [mem 0x8f7f1000-0x8f7fffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
- [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
- [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
- [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
- [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 _ASUS_)
- [ 0.000000] ACPI: XSDT 000000008e22d080 00074 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 000000008e23f8e0 0010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130328/tbfadt-603)
- [ 0.000000] ACPI: DSDT 000000008e22d190 1274D (v02 _ASUS_ Notebook 00000217 INTL 20051117)
- [ 0.000000] ACPI: FACS 000000008e5a6080 00040
- [ 0.000000] ACPI: APIC 000000008e23f9f0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: FPDT 000000008e23fa68 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
- [ 0.000000] ACPI: ECDT 000000008e23fab0 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
- [ 0.000000] ACPI: MSDM 000000008e23fb78 00055 (v03 _ASUS_ Notebook 00000001 ASUS 00000001)
- [ 0.000000] ACPI: MCFG 000000008e23fbd0 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
- [ 0.000000] ACPI: HPET 000000008e23fc10 00038 (v01 _ASUS_ Notebook 01072009 AMI 00000005)
- [ 0.000000] ACPI: SSDT 000000008e23fc48 00B9C (v01 _ASUS_ Notebook 00000001 AMD 00000001)
- [ 0.000000] ACPI: SSDT 000000008e2407e8 01ECC (v02 _ASUS_ Notebook 00000001 MSFT 04000000)
- [ 0.000000] ACPI: CRAT 000000008e2426b8 002A8 (v01 _ASUS_ Notebook 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024effffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x24effffff]
- [ 0.000000] NODE_DATA [mem 0x24eff6000-0x24eff9fff]
- [ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246e00000-ffff88024e5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x24effffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
- [ 0.000000] node 0: [mem 0x00100000-0x8e097fff]
- [ 0.000000] node 0: [mem 0x8ef5b000-0x8ef5bfff]
- [ 0.000000] node 0: [mem 0x8f15f000-0x8f542fff]
- [ 0.000000] node 0: [mem 0x8f7f1000-0x8f7fffff]
- [ 0.000000] node 0: [mem 0x100001000-0x24effffff]
- [ 0.000000] On node 0 totalpages: 1954856
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 9043 pages used for memmap
- [ 0.000000] DMA32 zone: 578700 pages, LIFO batch:31
- [ 0.000000] Normal zone: 21440 pages used for memmap
- [ 0.000000] Normal zone: 1372159 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 000000008e098000 - 000000008e21e000
- [ 0.000000] PM: Registered nosave memory: 000000008e21e000 - 000000008e243000
- [ 0.000000] PM: Registered nosave memory: 000000008e243000 - 000000008e5b0000
- [ 0.000000] PM: Registered nosave memory: 000000008e5b0000 - 000000008ef5b000
- [ 0.000000] PM: Registered nosave memory: 000000008ef5c000 - 000000008f15f000
- [ 0.000000] PM: Registered nosave memory: 000000008f543000 - 000000008f7f1000
- [ 0.000000] PM: Registered nosave memory: 000000008f800000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
- [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
- [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
- [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
- [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed80000
- [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
- [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ffc00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
- [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
- [ 0.000000] e820: [mem 0x8f800000-0xfebfffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88024ec00000 s79680 r8192 d22720 u524288
- [ 0.000000] pcpu-alloc: s79680 r8192 d22720 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1924288
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.10.17-gentoo root=/dev/sda3 ro
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ 0 size 32 MB
- [ 0.000000] Your BIOS doesn't leave a aperture memory hole
- [ 0.000000] Please enable the IOMMU option in the BIOS setup
- [ 0.000000] This costs you 64 MB of RAM
- [ 0.000000] Mapping aperture over 65536 KB of RAM @ 84000000
- [ 0.000000] PM: Registered nosave memory: 0000000084000000 - 0000000088000000
- [ 0.000000] Memory: 7546996k/9682944k available (8709k kernel code, 1863520k absent, 272428k reserved, 6447k data, 1020k init)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 1896.607 MHz processor
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3793.21 BogoMIPS (lpj=1896607)
- [ 0.000134] pid_max: default: 32768 minimum: 301
- [ 0.000222] Security Framework initialized
- [ 0.000289] SELinux: Initializing.
- [ 0.000360] SELinux: Starting in permissive mode
- [ 0.000910] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.003480] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.004673] Mount-cache hash table entries: 256
- [ 0.004949] Initializing cgroup subsys freezer
- [ 0.005037] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
- [ 0.005161] tseg: 008f800000
- [ 0.005164] CPU: Physical Processor ID: 0
- [ 0.005228] CPU: Processor Core ID: 0
- [ 0.005292] mce: CPU supports 7 MCE banks
- [ 0.005369] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
- Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
- tlb_flushall_shift: 5
- [ 0.005609] Freeing SMP alternatives: 28k freed
- [ 0.005684] ACPI: Core revision 20130328
- [ 0.012189] ACPI: All ACPI Tables successfully acquired
- [ 0.055324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.065394] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
- [ 0.167487] Performance Events:
- [ 0.167522] perf: AMD core performance counters detected
- [ 0.167651] AMD PMU driver.
- [ 0.167717] ... version: 0
- [ 0.167781] ... bit width: 48
- [ 0.167846] ... generic registers: 6
- [ 0.167911] ... value mask: 0000ffffffffffff
- [ 0.167977] ... max period: 00007fffffffffff
- [ 0.168042] ... fixed-purpose events: 0
- [ 0.168107] ... event mask: 000000000000003f
- [ 0.168338] MCE: In-kernel MCE decoding enabled.
- [1266874889.661589] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
- [ 0.168491] smpboot: Booting Node 0, Processors #1
- [ 0.181707] TSC synchronization [CPU#0 -> CPU#1]:
- [ 0.181992] Measured 431500739 cycles TSC warp between CPUs, turning off TSC clock.
- [ 0.002000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
- [ 0.001000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
- [ 0.038110] #2 #3 OK
- [ 0.001000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
- [ 0.061430] Brought up 4 CPUs
- [ 0.062002] smpboot: Total of 4 processors activated (15172.85 BogoMIPS)
- [ 0.063435] devtmpfs: initialized
- [ 0.064049] PM: Registering ACPI NVS region [mem 0x8e243000-0x8e5affff] (3592192 bytes)
- [ 0.064224] PM: Registering ACPI NVS region [mem 0x8ef5c000-0x8f15efff] (2109440 bytes)
- [ 0.064403] kworker/u8:0 (26) used greatest stack depth: 5720 bytes left
- [ 0.064408] RTC time: 18:25:20, date: 12/08/13
- [ 0.064408] NET: Registered protocol family 16
- [ 0.065074] ACPI: bus type PCI registered
- [ 0.065151] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.065153] PCI: not using MMCONFIG
- [ 0.066003] PCI: Using configuration type 1 for base access
- [ 0.066070] PCI: Using configuration type 1 for extended access
- [ 0.066168] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.066168] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.066168] mtrr: corrected configuration.
- [ 0.082026] bio: create slab <bio-0> at 0
- [ 0.082117] ACPI: Added _OSI(Module Device)
- [ 0.082117] ACPI: Added _OSI(Processor Device)
- [ 0.082174] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.082241] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.084563] ACPI: EC: EC description table is found, configuring boot EC
- [ 0.086474] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.093578] ACPI: Interpreter enabled
- [ 0.093664] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
- [ 0.093833] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
- [ 0.094022] ACPI: (supports S0 S3 S4 S5)
- [ 0.094088] ACPI: Using IOAPIC for interrupt routing
- [ 0.094320] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.094473] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.118718] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.119119] ACPI: No dock devices found.
- [ 0.166166] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.166713] PCI host bridge to bus 0000:00
- [ 0.166713] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.167006] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
- [ 0.167074] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
- [ 0.167143] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
- [ 0.167211] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.167279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.167347] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
- [ 0.167415] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
- [ 0.167492] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
- [ 0.167600] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
- [ 0.167600] pci 0000:00:01.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
- [ 0.167600] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
- [ 0.167600] pci 0000:00:01.0: reg 18: [mem 0xffb00000-0xffb3ffff]
- [ 0.167600] pci 0000:00:01.0: supports D1 D2
- [ 0.168019] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
- [ 0.168020] pci 0000:00:01.1: reg 10: [mem 0xffb44000-0xffb47fff]
- [ 0.168065] pci 0000:00:01.1: supports D1 D2
- [ 0.168137] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
- [ 0.168137] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.168139] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
- [ 0.168139] pci 0000:00:10.0: reg 10: [mem 0xffb48000-0xffb49fff 64bit]
- [ 0.168207] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
- [ 0.168274] pci 0000:00:10.0: System wakeup disabled by ACPI
- [ 0.168274] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
- [ 0.168274] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
- [ 0.168274] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
- [ 0.168274] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
- [ 0.168274] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
- [ 0.168274] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
- [ 0.168274] pci 0000:00:11.0: reg 24: [mem 0xffb4f000-0xffb4f7ff]
- [ 0.169014] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
- [ 0.169027] pci 0000:00:12.0: reg 10: [mem 0xffb4e000-0xffb4efff]
- [ 0.169125] pci 0000:00:12.0: System wakeup disabled by ACPI
- [ 0.169251] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
- [ 0.169251] pci 0000:00:12.2: reg 10: [mem 0xffb4d000-0xffb4d0ff]
- [ 0.169251] pci 0000:00:12.2: supports D1 D2
- [ 0.169251] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.169251] pci 0000:00:12.2: System wakeup disabled by ACPI
- [ 0.169284] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
- [ 0.169284] pci 0000:00:13.0: reg 10: [mem 0xffb4c000-0xffb4cfff]
- [ 0.169284] pci 0000:00:13.0: System wakeup disabled by ACPI
- [ 0.170025] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
- [ 0.170042] pci 0000:00:13.2: reg 10: [mem 0xffb4b000-0xffb4b0ff]
- [ 0.170115] pci 0000:00:13.2: supports D1 D2
- [ 0.170118] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.170175] pci 0000:00:13.2: System wakeup disabled by ACPI
- [ 0.170292] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
- [ 0.170292] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
- [ 0.170292] pci 0000:00:14.2: reg 10: [mem 0xffb40000-0xffb43fff 64bit]
- [ 0.170292] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.170292] pci 0000:00:14.2: System wakeup disabled by ACPI
- [ 0.170292] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
- [ 0.171012] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
- [ 0.171088] pci 0000:00:14.4: System wakeup disabled by ACPI
- [ 0.171206] pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
- [ 0.171206] pci 0000:00:14.7: reg 10: [mem 0xffb4a000-0xffb4a0ff 64bit]
- [ 0.171206] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
- [ 0.171206] pci 0000:00:15.0: supports D1 D2
- [ 0.171206] pci 0000:00:15.0: System wakeup disabled by ACPI
- [ 0.171206] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
- [ 0.171206] pci 0000:00:15.1: supports D1 D2
- [ 0.171206] pci 0000:00:15.1: System wakeup disabled by ACPI
- [ 0.172031] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
- [ 0.172097] pci 0000:00:15.2: supports D1 D2
- [ 0.172156] pci 0000:00:15.2: System wakeup disabled by ACPI
- [ 0.172273] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
- [ 0.172273] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
- [ 0.172273] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
- [ 0.172273] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
- [ 0.172273] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
- [ 0.173014] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
- [ 0.173083] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
- [ 0.173083] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.173083] pci 0000:01:00.0: reg 18: [mem 0xffa20000-0xffa3ffff 64bit]
- [ 0.173083] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
- [ 0.173083] pci 0000:01:00.0: reg 30: [mem 0xffa00000-0xffa1ffff pref]
- [ 0.173111] pci 0000:01:00.0: supports D1 D2
- [ 0.175061] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.175167] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 0.175171] pci 0000:00:02.0: bridge window [mem 0xffa00000-0xffafffff]
- [ 0.175176] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.176050] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
- [ 0.176125] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
- [ 0.176128] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
- [ 0.176130] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
- [ 0.176132] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.176135] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.176137] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
- [ 0.176140] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
- [ 0.176197] pci 0000:00:15.0: PCI bridge to [bus 03]
- [ 0.176197] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
- [ 0.176197] pci 0000:04:00.0: reg 10: [mem 0xff900000-0xff97ffff 64bit]
- [ 0.176197] pci 0000:04:00.0: reg 30: [mem 0xff980000-0xff98ffff pref]
- [ 0.176197] pci 0000:04:00.0: supports D1 D2
- [ 0.176197] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.176197] pci 0000:04:00.0: System wakeup disabled by ACPI
- [ 0.178103] pci 0000:00:15.1: PCI bridge to [bus 04]
- [ 0.178182] pci 0000:00:15.1: bridge window [mem 0xff900000-0xff9fffff]
- [ 0.179031] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.179048] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
- [ 0.179078] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- [ 0.179097] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
- [ 0.179176] pci 0000:05:00.0: supports D1 D2
- [ 0.179179] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.181106] pci 0000:00:15.2: PCI bridge to [bus 05]
- [ 0.181221] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
- [ 0.181235] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.181422] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
- [ 0.181735] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
- [ 0.191273] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.191750] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.192281] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.192754] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.193232] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.193683] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.194111] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.194573] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.196071] ACPI: Enabled 1 GPEs in block 00 to 1F
- [ 0.196209] acpi root: \_SB_.PCI0 notify handler is installed
- [ 0.196278] Found 1 acpi root devices
- [ 0.196379] ACPI: EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
- [ 0.197008] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.197155] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
- [ 0.197277] vgaarb: loaded
- [ 0.197343] vgaarb: bridge control possible 0000:01:00.0
- [ 0.197409] vgaarb: no bridge control possible 0000:00:01.0
- [ 0.197557] SCSI subsystem initialized
- [ 0.197557] ACPI: bus type ATA registered
- [ 0.198019] libata version 3.00 loaded.
- [ 0.198019] ACPI: bus type USB registered
- [ 0.198135] usbcore: registered new interface driver usbfs
- [ 0.198135] usbcore: registered new interface driver hub
- [ 0.198135] usbcore: registered new device driver usb
- [ 0.198135] pps_core: LinuxPPS API ver. 1 registered
- [ 0.198135] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.199013] PTP clock support registered
- [ 0.199101] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.199101] PCI: Using ACPI for IRQ routing
- [ 0.206615] PCI: pci_cache_line_size set to 64 bytes
- [ 0.206682] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
- [ 0.206685] e820: reserve RAM buffer [mem 0x8e098000-0x8fffffff]
- [ 0.206687] e820: reserve RAM buffer [mem 0x8ef5c000-0x8fffffff]
- [ 0.206689] e820: reserve RAM buffer [mem 0x8f543000-0x8fffffff]
- [ 0.206691] e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
- [ 0.206692] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
- [ 0.207061] Bluetooth: Core ver 2.16
- [ 0.207061] NET: Registered protocol family 31
- [ 0.207093] Bluetooth: HCI device and connection manager initialized
- [ 0.207162] Bluetooth: HCI socket layer initialized
- [ 0.207232] Bluetooth: L2CAP socket layer initialized
- [ 0.207302] Bluetooth: SCO socket layer initialized
- [ 0.208074] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.208126] NetLabel: Initializing
- [ 0.208222] NetLabel: domain hash size = 128
- [ 0.208288] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.208381] NetLabel: unlabeled traffic allowed by default
- [ 0.208474] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.208474] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.212029] Switching to clocksource hpet
- [ 0.223139] pnp: PnP ACPI init
- [ 0.223215] ACPI: bus type PNP registered
- [ 0.223499] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.223570] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.223835] system 00:01: [mem 0x90000000-0xafffffff] has been reserved
- [ 0.223905] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.224446] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.224515] system 00:02: [io 0x040b] has been reserved
- [ 0.224584] system 00:02: [io 0x04d6] has been reserved
- [ 0.224652] system 00:02: [io 0x0c00-0x0c01] has been reserved
- [ 0.224721] system 00:02: [io 0x0c14] has been reserved
- [ 0.224792] system 00:02: [io 0x0c50-0x0c51] has been reserved
- [ 0.224861] system 00:02: [io 0x0c52] has been reserved
- [ 0.224932] system 00:02: [io 0x0c6c] has been reserved
- [ 0.225022] system 00:02: [io 0x0c6f] has been reserved
- [ 0.225103] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.225171] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.225238] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.225305] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.225372] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.225439] system 00:02: [io 0x0800-0x089f] has been reserved
- [ 0.225507] system 00:02: [io 0x0b20-0x0b3f] has been reserved
- [ 0.225574] system 00:02: [io 0x0900-0x090f] has been reserved
- [ 0.225642] system 00:02: [io 0x0910-0x091f] has been reserved
- [ 0.225709] system 00:02: [io 0xfe00-0xfefe] has been reserved
- [ 0.225778] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.225846] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.225913] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
- [ 0.225981] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
- [ 0.226067] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
- [ 0.226146] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
- [ 0.226217] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
- [ 0.226285] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.226299] pnp 00:03: [dma 4]
- [ 0.226420] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.226507] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.226580] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.226716] system 00:06: [io 0x04d0-0x04d1] has been reserved
- [ 0.226784] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.226861] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.226973] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.227121] pnp 00:09: Plug and Play ACPI device, IDs ETD0109 SYN1d00 SYN0002 PNP0f13 (active)
- [ 0.227226] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP0303 (active)
- [ 0.227346] system 00:0b: [io 0x0240-0x0259] has been reserved
- [ 0.227414] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.231687] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.231705] pnp: PnP ACPI: found 13 devices
- [ 0.231774] ACPI: bus type PNP unregistered
- [ 0.236780] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.236850] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 0.236920] pci 0000:00:02.0: bridge window [mem 0xffa00000-0xffafffff]
- [ 0.236993] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.237135] pci 0000:00:14.4: PCI bridge to [bus 02]
- [ 0.237211] pci 0000:00:15.0: PCI bridge to [bus 03]
- [ 0.237286] pci 0000:00:15.1: PCI bridge to [bus 04]
- [ 0.237355] pci 0000:00:15.1: bridge window [mem 0xff900000-0xff9fffff]
- [ 0.237428] pci 0000:00:15.2: PCI bridge to [bus 05]
- [ 0.237496] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
- [ 0.237568] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.238134] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
- [ 0.238138] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
- [ 0.238140] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
- [ 0.238142] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
- [ 0.238145] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
- [ 0.238147] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
- [ 0.238150] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
- [ 0.238152] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.238155] pci_bus 0000:01: resource 1 [mem 0xffa00000-0xffafffff]
- [ 0.238157] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.238160] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
- [ 0.238162] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
- [ 0.238165] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
- [ 0.238167] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
- [ 0.238169] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
- [ 0.238171] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
- [ 0.238174] pci_bus 0000:02: resource 10 [mem 0xb0000000-0xffffffff]
- [ 0.238176] pci_bus 0000:04: resource 1 [mem 0xff900000-0xff9fffff]
- [ 0.238179] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
- [ 0.238181] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.238214] NET: Registered protocol family 2
- [ 0.238549] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.239037] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.239394] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.239502] TCP: reno registered
- [ 0.239609] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.239723] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.239928] NET: Registered protocol family 1
- [ 0.240148] RPC: Registered named UNIX socket transport module.
- [ 0.240216] RPC: Registered udp transport module.
- [ 0.240281] RPC: Registered tcp transport module.
- [ 0.240348] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.240425] pci 0000:00:01.0: Boot video device
- [ 0.387574] PCI: CLS 64 bytes, default 64
- [ 0.387628] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.387722] software IO TLB [mem 0x8a098000-0x8e098000] (64MB) mapped at [ffff88008a098000-ffff88008e097fff]
- [ 0.388141] perf: AMD NB counters detected
- [ 0.388230] LVT offset 0 assigned for vector 0x400
- [ 0.388322] perf: AMD IBS detected (0x000000ff)
- [ 0.389282] microcode: CPU0: patch_level=0x06001119
- [ 0.389360] microcode: CPU1: patch_level=0x06001119
- [ 0.390772] microcode: CPU2: patch_level=0x06001119
- [ 0.390846] microcode: CPU3: patch_level=0x06001119
- [ 0.390996] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.391136] Scanning for low memory corruption every 60 seconds
- [ 0.391681] audit: initializing netlink socket (disabled)
- [ 0.391786] type=2000 audit(1386527119.390:1): initialized
- [ 0.422562] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.427267] VFS: Disk quotas dquot_6.5.2
- [ 0.427492] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.429108] NFS: Registering the id_resolver key type
- [ 0.429186] Key type id_resolver registered
- [ 0.429252] Key type id_legacy registered
- [ 0.429447] fuse init (API version 7.22)
- [ 0.429884] msgmni has been set to 14740
- [ 0.430075] SELinux: Registering netfilter hooks
- [ 0.430880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.431020] io scheduler noop registered
- [ 0.431087] io scheduler deadline registered
- [ 0.431231] io scheduler cfq registered (default)
- [ 0.431467] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
- [ 0.431657] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
- [ 0.431774] pcieport 0000:00:15.1: irq 42 for MSI/MSI-X
- [ 0.431886] pcieport 0000:00:15.2: irq 43 for MSI/MSI-X
- [ 0.432119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.432278] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.433611] Non-volatile memory driver v1.3
- [ 0.433678] Linux agpgart interface v0.103
- [ 0.434026] ACPI: AC Adapter [AC0] (on-line)
- [ 0.434382] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 0.436247] ACPI: Lid Switch [LID]
- [ 0.436497] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 0.436627] ACPI: Power Button [PWRB]
- [ 0.436804] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
- [ 0.436930] ACPI: Sleep Button [SLPB]
- [ 0.437165] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.437294] ACPI: Power Button [PWRF]
- [ 0.442600] acpi device:0d: registered as cooling_device0
- [ 0.442759] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 0.442962] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0c/LNXVIDEO:00/input/input4
- [ 0.447989] acpi device:35: registered as cooling_device1
- [ 0.448170] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
- [ 0.448384] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input5
- [ 0.448602] ACPI: acpi_idle registered with cpuidle
- [ 0.488133] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.488231] ACPI: Thermal Zone [THRM] (38 C)
- [ 0.488592] [drm] Initialized drm 1.1.0 20060810
- [ 0.488726] [drm] radeon kernel modesetting enabled.
- [ 0.489366] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9903 0x1043:0x106B).
- [ 0.489525] [drm] register mmio base: 0xFFB00000
- [ 0.489592] [drm] register mmio size: 262144
- [ 0.489720] ATOM BIOS: 113
- [ 0.489875] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
- [ 0.490040] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
- [ 0.490733] [drm] Detected VRAM RAM=512M, BAR=256M
- [ 0.490804] [drm] RAM width 64bits DDR
- [ 0.490953] [TTM] Zone kernel: Available graphics memory: 3773512 kiB
- [ 0.491033] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 0.491101] [TTM] Initializing pool allocator
- [ 0.491172] [TTM] Initializing DMA pool allocator
- [ 0.491281] [drm] radeon: 512M of VRAM memory ready
- [ 0.491372] [drm] radeon: 512M of GTT memory ready.
- [ 0.491939] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 0.509379] [drm] Loading ARUBA Microcode
- [ 0.510351] [drm] PCIE GART of 512M enabled (table at 0x0000000000276000).
- [ 0.510588] radeon 0000:00:01.0: WB enabled
- [ 0.510683] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8802452cec00
- [ 0.511657] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011035a18
- [ 0.511839] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8802452cec04
- [ 0.511964] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8802452cec08
- [ 0.512085] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8802452cec0c
- [ 0.512192] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8802452cec10
- [ 0.512318] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 0.512385] [drm] Driver supports precise vblank timestamp query.
- [ 0.512472] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
- [ 0.512482] radeon 0000:00:01.0: radeon: using MSI.
- [ 0.512821] [drm] radeon: irq initialized.
- [ 0.532373] [drm] ring test on 0 succeeded in 3 usecs
- [ 0.532557] [drm] ring test on 3 succeeded in 2 usecs
- [ 0.532654] [drm] ring test on 4 succeeded in 1 usecs
- [ 0.540115] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.588774] [drm] ring test on 5 succeeded in 1 usecs
- [ 0.588900] [drm] UVD initialized successfully.
- [ 0.611674] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 0.612445] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 0.613129] [drm] ib test on ring 4 succeeded in 1 usecs
- [ 0.634278] [drm] ib test on ring 5 succeeded
- [ 0.660478] [drm] radeon atom DIG backlight initialized
- [ 0.660607] [drm] Radeon Display Connectors
- [ 0.660673] [drm] Connector 0:
- [ 0.660739] [drm] LVDS-1
- [ 0.660804] [drm] HPD1
- [ 0.660870] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
- [ 0.660996] [drm] Encoders:
- [ 0.661077] [drm] LCD1: INTERNAL_UNIPHY2
- [ 0.661149] [drm] LCD1: TRAVIS
- [ 0.661214] [drm] Connector 1:
- [ 0.661279] [drm] VGA-1
- [ 0.661344] [drm] HPD2
- [ 0.661410] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
- [ 0.661533] [drm] Encoders:
- [ 0.661598] [drm] CRT1: INTERNAL_UNIPHY2
- [ 0.661663] [drm] CRT1: NUTMEG
- [ 0.661729] [drm] Connector 2:
- [ 0.661794] [drm] HDMI-A-1
- [ 0.661858] [drm] HPD3
- [ 0.661924] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
- [ 0.662061] [drm] Encoders:
- [ 0.662137] [drm] DFP1: INTERNAL_UNIPHY
- [ 0.695449] [drm] Internal thermal controller without fan control
- [ 0.695612] [drm] radeon: power management initialized
- [ 0.779859] [drm] fb mappable at 0xB1382000
- [ 0.779985] [drm] vram apper at 0xB0000000
- [ 0.780056] [drm] size 4325376
- [ 0.780121] [drm] fb depth is 24
- [ 0.780185] [drm] pitch is 5632
- [ 0.780619] fbcon: radeondrmfb (fb0) is primary device
- [ 0.901344] Console: switching to colour frame buffer device 170x48
- [ 0.904627] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
- [ 0.904661] radeon 0000:00:01.0: registered panic notifier
- [ 0.905044] [drm] Initialized radeon 2.33.0 20080528 for 0000:00:01.0 on minor 0
- [ 0.905158] radeon 0000:01:00.0: enabling device (0000 -> 0003)
- [ 0.905577] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x1043:0x106B).
- [ 0.905637] [drm] register mmio base: 0xFFA20000
- [ 0.905661] [drm] register mmio size: 131072
- [ 2.110238] ATOM BIOS: Asus
- [ 2.110733] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- [ 2.110772] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
- [ 2.111284] [drm] Detected VRAM RAM=1024M, BAR=256M
- [ 2.111321] [drm] RAM width 64bits DDR
- [ 2.111362] [drm] radeon: 1024M of VRAM memory ready
- [ 2.111389] [drm] radeon: 512M of GTT memory ready.
- [ 2.111923] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 2.114046] [drm] Loading CAICOS Microcode
- [ 2.114961] [drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
- [ 2.115918] radeon 0000:01:00.0: WB enabled
- [ 2.116671] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880244fb3c00
- [ 2.117518] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880244fb3c0c
- [ 2.119861] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90012d32118
- [ 2.120656] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 2.121512] [drm] Driver supports precise vblank timestamp query.
- [ 2.122401] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
- [ 2.122412] radeon 0000:01:00.0: radeon: using MSI.
- [ 2.123247] [drm] radeon: irq initialized.
- [ 2.140768] [drm] ring test on 0 succeeded in 2 usecs
- [ 2.141701] [drm] ring test on 3 succeeded in 1 usecs
- [ 2.329763] [drm] ring test on 5 succeeded in 1 usecs
- [ 2.330594] [drm] UVD initialized successfully.
- [ 2.331832] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 2.332679] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 2.485980] [drm] ib test on ring 5 succeeded
- [ 2.487498] [drm] Radeon Display Connectors
- [ 2.490396] [drm] Internal thermal controller without fan control
- [ 2.492324] [drm] radeon: power management initialized
- [ 2.493403] radeon 0000:01:00.0: No connectors reported connected with modes
- [ 2.494401] [drm] Cannot find any crtc or sizes - going 1024x768
- [ 2.496689] [drm] fb mappable at 0xC0375000
- [ 2.497552] [drm] vram apper at 0xC0000000
- [ 2.498408] [drm] size 3145728
- [ 2.499238] [drm] fb depth is 24
- [ 2.499968] [drm] pitch is 4096
- [ 2.501058] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
- [ 2.501945] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 1
- [ 2.504799] loop: module loaded
- [ 2.506254] ahci 0000:00:11.0: version 3.0
- [ 2.506441] ahci 0000:00:11.0: irq 46 for MSI/MSI-X
- [ 2.506516] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xb impl SATA mode
- [ 2.507385] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
- [ 2.509347] scsi0 : ahci
- [ 2.510548] scsi1 : ahci
- [ 2.511787] scsi2 : ahci
- [ 2.513057] scsi3 : ahci
- [ 2.514185] ata1: SATA max UDMA/133 abar m2048@0xffb4f000 port 0xffb4f100 irq 46
- [ 2.515099] ata2: SATA max UDMA/133 abar m2048@0xffb4f000 port 0xffb4f180 irq 46
- [ 2.515791] ata3: DUMMY
- [ 2.516586] ata4: SATA max UDMA/133 abar m2048@0xffb4f000 port 0xffb4f280 irq 46
- [ 2.518112] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 2.518909] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 2.520066] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 2.520882] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 2.521981] sky2: driver version 1.30
- [ 2.523069] PPP generic driver version 2.4.2
- [ 2.529205] ath: phy0: timeout (1000 us) on reg 0x15f18: 0x00000000 & 0x00000007 != 0x00000004
- [ 2.531477] ath: EEPROM regdomain: 0x60
- [ 2.531479] ath: EEPROM indicates we should expect a direct regpair map
- [ 2.531482] ath: Country alpha2 being used: 00
- [ 2.531483] ath: Regpair used: 0x60
- [ 2.532840] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 2.533672] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90013880000, irq=17
- [ 2.535171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.535987] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 2.535991] ehci-pci: EHCI PCI platform driver
- [ 2.537136] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 2.538136] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 2.539099] QUIRK: Enable AMD PLL fix
- [ 2.539104] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.540065] ehci-pci 0000:00:12.2: debug port 1
- [ 2.541000] ehci-pci 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 2.541026] ehci-pci 0000:00:12.2: reset hcc_params a076 thresh 7 uframes 256/512/1024 park
- [ 2.541042] ehci-pci 0000:00:12.2: park 0
- [ 2.541050] ehci-pci 0000:00:12.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 2.541058] ehci-pci 0000:00:12.2: MWI active
- [ 2.541060] ehci-pci 0000:00:12.2: supports USB remote wakeup
- [ 2.541071] ehci-pci 0000:00:12.2: irq 17, io mem 0xffb4d000
- [ 2.542030] ehci-pci 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 2.548178] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 2.549174] usb usb1: default language 0x0409
- [ 2.549183] usb usb1: udev 1, busnum 1, minor = 0
- [ 2.549186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.550138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.551117] usb usb1: Product: EHCI Host Controller
- [ 2.552108] usb usb1: Manufacturer: Linux 3.10.17-gentoo ehci_hcd
- [ 2.553113] usb usb1: SerialNumber: 0000:00:12.2
- [ 2.554457] usb usb1: usb_probe_device
- [ 2.554460] usb usb1: configuration #1 chosen from 1 choice
- [ 2.554469] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 2.554542] hub 1-0:1.0: usb_probe_interface
- [ 2.554545] hub 1-0:1.0: usb_probe_interface - got id
- [ 2.554547] hub 1-0:1.0: USB hub found
- [ 2.555556] hub 1-0:1.0: 5 ports detected
- [ 2.556547] hub 1-0:1.0: standalone hub
- [ 2.556549] hub 1-0:1.0: no power switching (usb 1.0)
- [ 2.556551] hub 1-0:1.0: individual port over-current protection
- [ 2.556553] hub 1-0:1.0: power on to power good time: 20ms
- [ 2.556557] hub 1-0:1.0: local power source is good
- [ 2.556581] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 2.556813] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 2.558074] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 2.558911] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.559907] ehci-pci 0000:00:13.2: debug port 1
- [ 2.560824] ehci-pci 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 2.560828] ehci-pci 0000:00:13.2: reset hcc_params a076 thresh 7 uframes 256/512/1024 park
- [ 2.560838] ehci-pci 0000:00:13.2: park 0
- [ 2.560845] ehci-pci 0000:00:13.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 2.560852] ehci-pci 0000:00:13.2: MWI active
- [ 2.560854] ehci-pci 0000:00:13.2: supports USB remote wakeup
- [ 2.560861] ehci-pci 0000:00:13.2: irq 17, io mem 0xffb4b000
- [ 2.561827] ehci-pci 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 2.567177] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 2.568236] usb usb2: default language 0x0409
- [ 2.568245] usb usb2: udev 1, busnum 2, minor = 128
- [ 2.568248] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.569252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.570254] usb usb2: Product: EHCI Host Controller
- [ 2.571092] usb usb2: Manufacturer: Linux 3.10.17-gentoo ehci_hcd
- [ 2.571865] usb usb2: SerialNumber: 0000:00:13.2
- [ 2.573144] usb usb2: usb_probe_device
- [ 2.573147] usb usb2: configuration #1 chosen from 1 choice
- [ 2.573156] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 2.573225] hub 2-0:1.0: usb_probe_interface
- [ 2.573228] hub 2-0:1.0: usb_probe_interface - got id
- [ 2.573230] hub 2-0:1.0: USB hub found
- [ 2.574146] hub 2-0:1.0: 5 ports detected
- [ 2.575089] hub 2-0:1.0: standalone hub
- [ 2.575091] hub 2-0:1.0: no power switching (usb 1.0)
- [ 2.575093] hub 2-0:1.0: individual port over-current protection
- [ 2.575095] hub 2-0:1.0: power on to power good time: 20ms
- [ 2.575099] hub 2-0:1.0: local power source is good
- [ 2.576603] usb usb2: usb port4's DeviceRemovable is changed to 1 according to platform information.
- [ 2.576605] usb usb2: usb port5's DeviceRemovable is changed to 1 according to platform information.
- [ 2.576608] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 2.576901] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.577897] ohci_hcd: block sizes: ed 80 td 96
- [ 2.578054] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 2.579231] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 2.580215] ohci_hcd 0000:00:12.0: created debug files
- [ 2.580217] ohci_hcd 0000:00:12.0: supports USB remote wakeup
- [ 2.580236] ohci_hcd 0000:00:12.0: irq 18, io mem 0xffb4e000
- [ 2.636190] ohci_hcd 0000:00:12.0: OHCI controller state
- [ 2.636210] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 2.636214] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 2.636218] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
- [ 2.636221] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
- [ 2.636224] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 2.636233] ohci_hcd 0000:00:12.0: hcca frame #0005
- [ 2.636236] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
- [ 2.636239] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 2.636242] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
- [ 2.636245] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
- [ 2.636249] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
- [ 2.636252] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
- [ 2.636255] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
- [ 2.636258] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
- [ 2.636277] usb usb3: default language 0x0409
- [ 2.636283] usb usb3: udev 1, busnum 3, minor = 256
- [ 2.636286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.637149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.637941] usb usb3: Product: OHCI Host Controller
- [ 2.638783] usb usb3: Manufacturer: Linux 3.10.17-gentoo ohci_hcd
- [ 2.639623] usb usb3: SerialNumber: 0000:00:12.0
- [ 2.640809] usb usb3: usb_probe_device
- [ 2.640813] usb usb3: configuration #1 chosen from 1 choice
- [ 2.640820] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 2.640889] hub 3-0:1.0: usb_probe_interface
- [ 2.640891] hub 3-0:1.0: usb_probe_interface - got id
- [ 2.640894] hub 3-0:1.0: USB hub found
- [ 2.641840] hub 3-0:1.0: 5 ports detected
- [ 2.642737] hub 3-0:1.0: standalone hub
- [ 2.642739] hub 3-0:1.0: no power switching (usb 1.0)
- [ 2.642740] hub 3-0:1.0: no over-current protection
- [ 2.642742] hub 3-0:1.0: power on to power good time: 4ms
- [ 2.642747] hub 3-0:1.0: local power source is good
- [ 2.642772] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 2.642805] ohci_hcd 0000:00:12.0: FS/LS companion for 0000:00:12.2
- [ 2.643043] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 2.644196] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
- [ 2.645120] ohci_hcd 0000:00:13.0: created debug files
- [ 2.645122] ohci_hcd 0000:00:13.0: supports USB remote wakeup
- [ 2.645132] ohci_hcd 0000:00:13.0: irq 18, io mem 0xffb4c000
- [ 2.656179] ehci-pci 0000:00:12.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 2.656186] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 2.676074] ehci-pci 0000:00:13.2: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.676079] hub 2-0:1.0: port 4: status 0501 change 0001
- [ 2.676087] ehci-pci 0000:00:13.2: GetStatus port:5 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.676090] hub 2-0:1.0: port 5: status 0501 change 0001
- [ 2.701184] ohci_hcd 0000:00:13.0: OHCI controller state
- [ 2.701210] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 2.701214] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 2.701218] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
- [ 2.701221] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
- [ 2.701224] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 2.701233] ohci_hcd 0000:00:13.0: hcca frame #0005
- [ 2.701236] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
- [ 2.701239] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 2.701242] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
- [ 2.701245] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
- [ 2.701248] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
- [ 2.701252] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
- [ 2.701255] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
- [ 2.701258] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
- [ 2.701273] usb usb4: default language 0x0409
- [ 2.701279] usb usb4: udev 1, busnum 4, minor = 384
- [ 2.701281] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.702114] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.702864] usb usb4: Product: OHCI Host Controller
- [ 2.703672] usb usb4: Manufacturer: Linux 3.10.17-gentoo ohci_hcd
- [ 2.704486] usb usb4: SerialNumber: 0000:00:13.0
- [ 2.705608] usb usb4: usb_probe_device
- [ 2.705612] usb usb4: configuration #1 chosen from 1 choice
- [ 2.705620] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 2.705690] hub 4-0:1.0: usb_probe_interface
- [ 2.705692] hub 4-0:1.0: usb_probe_interface - got id
- [ 2.705695] hub 4-0:1.0: USB hub found
- [ 2.706648] hub 4-0:1.0: 5 ports detected
- [ 2.707512] hub 4-0:1.0: standalone hub
- [ 2.707514] hub 4-0:1.0: no power switching (usb 1.0)
- [ 2.707516] hub 4-0:1.0: no over-current protection
- [ 2.707518] hub 4-0:1.0: power on to power good time: 4ms
- [ 2.707523] hub 4-0:1.0: local power source is good
- [ 2.709182] usb usb4: usb port4's DeviceRemovable is changed to 1 according to platform information.
- [ 2.709185] usb usb4: usb port5's DeviceRemovable is changed to 1 according to platform information.
- [ 2.709187] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 2.709221] ohci_hcd 0000:00:13.0: FS/LS companion for 0000:00:13.2
- [ 2.709317] uhci_hcd: USB Universal Host Controller Interface driver
- [ 2.710532] xhci_hcd 0000:00:10.0: xHCI Host Controller
- [ 2.711748] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
- [ 2.712834] xhci_hcd 0000:00:10.0: supports USB remote wakeup
- [ 2.712865] xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
- [ 2.712870] xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
- [ 2.712875] xhci_hcd 0000:00:10.0: irq 49 for MSI/MSI-X
- [ 2.712880] xhci_hcd 0000:00:10.0: irq 50 for MSI/MSI-X
- [ 2.712885] xhci_hcd 0000:00:10.0: irq 51 for MSI/MSI-X
- [ 2.712965] usb usb5: default language 0x0409
- [ 2.712970] usb usb5: udev 1, busnum 5, minor = 512
- [ 2.712973] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.713950] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.714928] usb usb5: Product: xHCI Host Controller
- [ 2.715897] usb usb5: Manufacturer: Linux 3.10.17-gentoo xhci_hcd
- [ 2.716875] usb usb5: SerialNumber: 0000:00:10.0
- [ 2.718151] usb usb5: usb_probe_device
- [ 2.718154] usb usb5: configuration #1 chosen from 1 choice
- [ 2.718156] xHCI xhci_add_endpoint called for root hub
- [ 2.718158] xHCI xhci_check_bandwidth called for root hub
- [ 2.718163] usb usb5: adding 5-0:1.0 (config #1, interface 0)
- [ 2.718231] hub 5-0:1.0: usb_probe_interface
- [ 2.718233] hub 5-0:1.0: usb_probe_interface - got id
- [ 2.718235] hub 5-0:1.0: USB hub found
- [ 2.719135] hub 5-0:1.0: 2 ports detected
- [ 2.720090] hub 5-0:1.0: standalone hub
- [ 2.720092] hub 5-0:1.0: no power switching (usb 1.0)
- [ 2.720094] hub 5-0:1.0: individual port over-current protection
- [ 2.720095] hub 5-0:1.0: Single TT
- [ 2.720097] hub 5-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 2.720099] hub 5-0:1.0: power on to power good time: 20ms
- [ 2.720103] hub 5-0:1.0: local power source is good
- [ 2.720116] hub 5-0:1.0: trying to enable port power on non-switchable hub
- [ 2.720151] xhci_hcd 0000:00:10.0: xHCI Host Controller
- [ 2.721240] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
- [ 2.722158] xhci_hcd 0000:00:10.0: supports USB remote wakeup
- [ 2.722182] usb usb6: skipped 1 descriptor after endpoint
- [ 2.722185] usb usb6: default language 0x0409
- [ 2.722191] usb usb6: udev 1, busnum 6, minor = 640
- [ 2.722194] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.723138] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.724118] usb usb6: Product: xHCI Host Controller
- [ 2.725085] usb usb6: Manufacturer: Linux 3.10.17-gentoo xhci_hcd
- [ 2.726087] usb usb6: SerialNumber: 0000:00:10.0
- [ 2.727249] usb usb6: usb_probe_device
- [ 2.727252] usb usb6: configuration #1 chosen from 1 choice
- [ 2.727254] xHCI xhci_add_endpoint called for root hub
- [ 2.727255] xHCI xhci_check_bandwidth called for root hub
- [ 2.727261] usb usb6: adding 6-0:1.0 (config #1, interface 0)
- [ 2.727326] hub 6-0:1.0: usb_probe_interface
- [ 2.727328] hub 6-0:1.0: usb_probe_interface - got id
- [ 2.727331] hub 6-0:1.0: USB hub found
- [ 2.728166] hub 6-0:1.0: 2 ports detected
- [ 2.729111] hub 6-0:1.0: standalone hub
- [ 2.729113] hub 6-0:1.0: no power switching (usb 1.0)
- [ 2.729115] hub 6-0:1.0: individual port over-current protection
- [ 2.729117] hub 6-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 2.729119] hub 6-0:1.0: power on to power good time: 20ms
- [ 2.729128] hub 6-0:1.0: local power source is good
- [ 2.729144] hub 6-0:1.0: trying to enable port power on non-switchable hub
- [ 2.734366] usbcore: registered new interface driver usblp
- [ 2.735433] usbcore: registered new interface driver usb-storage
- [ 2.736654] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 2.741060] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.741980] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.743190] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 2.743273] mousedev: PS/2 mouse device common for all mice
- [ 2.744885] rtc_cmos 00:04: RTC can wake from S4
- [ 2.746112] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 2.747102] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 2.748529] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 2.749761] usbcore: registered new interface driver btusb
- [ 2.750824] usbcore: registered new interface driver ath3k
- [ 2.751882] cpuidle: using governor ladder
- [ 2.753038] cpuidle: using governor menu
- [ 2.753861] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
- [ 2.755237] sdhci: Secure Digital Host Controller Interface driver
- [ 2.756164] sdhci: Copyright(c) Pierre Ossman
- [ 2.757121] hub 1-0:1.0: state 7 ports 5 chg 0002 evt 0000
- [ 2.757134] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 2.757144] ehci-pci 0000:00:12.2: port 1 low speed --> companion
- [ 2.757178] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
- [ 2.758760] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
- [ 2.760069] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.762506] usbcore: registered new interface driver usbhid
- [ 2.763585] usbhid: USB HID core driver
- [ 2.765455] hda-intel 0000:00:01.1: Force to non-snoop mode
- [ 2.766514] snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
- [ 2.788717] Netfilter messages via NETLINK v0.30.
- [ 2.789717] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 2.790916] ctnetlink v0.93: registering with nfnetlink.
- [ 2.792062] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.793128] TCP: cubic registered
- [ 2.794159] Initializing XFRM netlink socket
- [ 2.795407] NET: Registered protocol family 10
- [ 2.796572] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.797587] sit: IPv6 over IPv4 tunneling driver
- [ 2.799055] NET: Registered protocol family 17
- [ 2.800045] Bluetooth: RFCOMM socket layer initialized
- [ 2.800999] Bluetooth: RFCOMM ver 1.11
- [ 2.801899] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 2.802759] Bluetooth: HIDP socket layer initialized
- [ 2.803601] Key type dns_resolver registered
- [ 2.805738] PM: Hibernation image not present or could not be loaded.
- [ 2.805756] registered taskstats version 1
- [ 2.807127] Magic number: 9:920:442
- [ 2.808097] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 2.808120] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2.808126] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 2.808132] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 2.808150] console [netcon0] enabled
- [ 2.809112] netconsole: network logging started
- [ 2.810052] acpi-cpufreq: overriding BIOS provided _PSD data
- [ 2.811341] ALSA device list:
- [ 2.812325] #0: HDA ATI HDMI at 0xffb44000 irq 52
- [ 2.813150] #1: HD-Audio Generic at 0xffb40000 irq 16
- [ 2.822197] ata4: SATA link down (SStatus 0 SControl 300)
- [ 2.912184] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 2.912190] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 2.912197] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 2.912201] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 2.978186] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.979172] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.981645] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA60A, max UDMA/133
- [ 2.982638] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.983661] ata2.00: ATAPI: HL-DT-ST DVDRAM GT51N, AS01, max UDMA/133
- [ 2.986200] ata1.00: configured for UDMA/133
- [ 2.987422] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
- [ 2.988943] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 2.989102] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.989872] ata2.00: configured for UDMA/133
- [ 2.991937] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 2.992990] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.994020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.994040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.995567] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT51N AS01 PQ: 0 ANSI: 5
- [ 3.003170] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 3.004216] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 3.005528] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 3.005722] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 3.016220] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 3.037994] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000311
- [ 3.057880] sda: sda1 sda2 sda3 sda4
- [ 3.059885] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.089180] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 3.140173] usb 3-1: new low-speed USB device number 2 using ohci_hcd
- [ 3.163804] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000313
- [ 3.175354] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
- [ 3.214190] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 3.285349] usb 3-1: skipped 1 descriptor after interface
- [ 3.287348] usb 3-1: default language 0x0409
- [ 3.293349] usb 3-1: udev 2, busnum 3, minor = 257
- [ 3.293354] usb 3-1: New USB device found, idVendor=046d, idProduct=c05f
- [ 3.294200] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.295179] usb 3-1: Product: USB Optical Mouse
- [ 3.295981] usb 3-1: Manufacturer: Logitech
- [ 3.297232] usb 3-1: usb_probe_device
- [ 3.297238] usb 3-1: configuration #1 chosen from 1 choice
- [ 3.298349] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
- [ 3.298522] usbhid 3-1:1.0: usb_probe_interface
- [ 3.298526] usbhid 3-1:1.0: usb_probe_interface - got id
- [ 3.304897] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input7
- [ 3.306374] hid-generic 0003:046D:C05F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
- [ 3.307544] hub 2-0:1.0: state 7 ports 5 chg 0030 evt 0000
- [ 3.307556] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
- [ 3.358198] ehci-pci 0000:00:13.2: port 4 reset complete, port enabled
- [ 3.358205] ehci-pci 0000:00:13.2: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 3.409185] usb 2-4: new high-speed USB device number 2 using ehci-pci
- [ 3.464195] ehci-pci 0000:00:13.2: port 4 reset complete, port enabled
- [ 3.464202] ehci-pci 0000:00:13.2: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 3.619337] usb 2-4: skipped 1 descriptor after configuration
- [ 3.619342] usb 2-4: skipped 5 descriptors after interface
- [ 3.619345] usb 2-4: skipped 1 descriptor after endpoint
- [ 3.619347] usb 2-4: skipped 17 descriptors after interface
- [ 3.619350] usb 2-4: skipped 1 descriptor after endpoint
- [ 3.621389] usb 2-4: default language 0x0409
- [ 3.634825] usb 2-4: udev 2, busnum 2, minor = 129
- [ 3.634831] usb 2-4: New USB device found, idVendor=1bcf, idProduct=2883
- [ 3.635966] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.637066] usb 2-4: Product: ASUS USB2.0 Webcam
- [ 3.637961] usb 2-4: Manufacturer: 04G626000611BQ342000NN6
- [ 3.639204] usb 2-4: usb_probe_device
- [ 3.639208] usb 2-4: configuration #1 chosen from 1 choice
- [ 3.639821] usb 2-4: adding 2-4:1.0 (config #1, interface 0)
- [ 3.721343] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
- [ 3.811577] usb 2-4: adding 2-4:1.1 (config #1, interface 1)
- [ 3.811719] md: Waiting for all devices to be available before autodetect
- [ 3.811723] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
- [ 3.812855] md: If you don't use raid, use raid=noautodetect
- [ 3.814411] md: Autodetecting RAID arrays.
- [ 3.815635] md: Scanned 0 and added 0 devices.
- [ 3.816792] md: autorun ...
- [ 3.817888] md: ... autorun DONE.
- [ 3.854748] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
- [ 3.856354] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
- [ 3.862216] ehci-pci 0000:00:13.2: port 5 full speed --> companion
- [ 3.862226] ehci-pci 0000:00:13.2: GetStatus port:5 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 3.862236] hub 2-0:1.0: port_wait_reset: err = -16
- [ 3.862239] hub 2-0:1.0: port 5 not enabled, trying reset again...
- [ 3.900614] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.901622] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 3.903628] Freeing unused kernel memory: 1020k freed
- [ 3.904845] Write protecting the kernel read-only data: 14336k
- [ 3.909416] Freeing unused kernel memory: 1520k freed
- [ 3.912239] Freeing unused kernel memory: 496k freed
- [ 4.063185] ehci-pci 0000:00:13.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 4.063208] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0020
- [ 4.063215] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00010101 CSC PPS CCS
- [ 4.063219] hub 4-0:1.0: port 5, status 0101, change 0001, 12 Mb/s
- [ 4.168154] hub 4-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x101
- [ 4.189711] ohci_hcd 0000:00:13.0: port[4] reset timeout, stat 00000111
- [ 4.240044] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 4.291181] usb 4-5: new full-speed USB device number 2 using ohci_hcd
- [ 4.314858] ohci_hcd 0000:00:13.0: port[4] reset timeout, stat 00000113
- [ 4.365179] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
- [ 4.437347] usb 4-5: default language 0x0409
- [ 4.443240] usb 4-5: udev 2, busnum 4, minor = 385
- [ 4.443245] usb 4-5: New USB device found, idVendor=13d3, idProduct=3362
- [ 4.444333] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.445264] usb 4-5: Product: Bluetooth USB Host Controller
- [ 4.446179] usb 4-5: Manufacturer: Atheros Communications
- [ 4.447133] usb 4-5: SerialNumber: Alaska Day 2006
- [ 4.448406] usb 4-5: usb_probe_device
- [ 4.448410] usb 4-5: configuration #1 chosen from 1 choice
- [ 4.451341] usb 4-5: adding 4-5:1.0 (config #1, interface 0)
- [ 4.451573] btusb 4-5:1.0: usb_probe_interface
- [ 4.451577] btusb 4-5:1.0: usb_probe_interface - got id
- [ 4.451586] ath3k 4-5:1.0: usb_probe_interface
- [ 4.451589] ath3k 4-5:1.0: usb_probe_interface - got id
- [ 4.610293] ohci_hcd 0000:00:13.0: urb ffff880244717a80 path 5 ep0out 5f120000 cc 5 --> status -62
- [ 4.610376] usb 4-5: adding 4-5:1.1 (config #1, interface 1)
- [ 4.610532] btusb 4-5:1.1: usb_probe_interface
- [ 4.610535] btusb 4-5:1.1: usb_probe_interface - got id
- [ 4.610544] ath3k 4-5:1.1: usb_probe_interface
- [ 4.610546] ath3k 4-5:1.1: usb_probe_interface - got id
- [ 4.610580] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 4.610583] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 4.610586] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 4.610599] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0020
- [ 4.610607] ehci-pci 0000:00:13.2: GetStatus port:5 status 001002 0 ACK POWER sig=se0 CSC
- [ 4.610614] hub 2-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
- [ 4.636184] ehci-pci 0000:00:13.2: GetStatus port:5 status 001002 0 ACK POWER sig=se0 CSC
- [ 4.740185] hub 2-0:1.0: debounce: port 5: total 125ms stable 100ms status 0x100
- [ 4.740191] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0020
- [ 4.740197] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [4] = 0x00030100 PESC CSC PPS
- [ 4.740203] hub 4-0:1.0: port 5, status 0100, change 0003, 12 Mb/s
- [ 4.740206] usb 4-5: USB disconnect, device number 2
- [ 4.741155] usb 4-5: unregistering device
- [ 4.741157] usb 4-5: unregistering interface 4-5:1.0
- [ 4.741412] usb 4-5: unregistering interface 4-5:1.1
- [ 4.741516] usb 4-5: usb_disable_device nuking all URBs
- [ 4.845181] hub 4-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
- [ 4.845187] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0020
- [ 4.927560] kbd_mode (1146) used greatest stack depth: 5640 bytes left
- [ 4.967660] loadkeys (1147) used greatest stack depth: 4952 bytes left
- [ 4.969162] init-early.sh (1142) used greatest stack depth: 4168 bytes left
- [ 6.564379] systemd-udevd[1309]: starting version 208
- [ 7.420276] systemd-udevd[1330]: renamed network interface wlan0 to wlp4s0
- [ 10.043770] vboxdrv: Found 4 processor cores.
- [ 10.043988] vboxdrv: fAsync=1 offMin=0x19b7f26d offMax=0x19b7f26d
- [ 10.044069] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
- [ 10.044071] vboxdrv: Successfully loaded version 4.2.18 (interface 0x001a0005).
- [ 10.360073] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 10.538961] Adding 2665468k swap on /dev/sda4. Priority:-1 extents:1 across:2665468k
- [ 14.696433] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
- [ 16.844726] wlp4s0: authenticate with a0:f3:c1:87:a8:f2
- [ 16.863971] wlp4s0: send auth to a0:f3:c1:87:a8:f2 (try 1/3)
- [ 16.865925] wlp4s0: authenticated
- [ 16.867091] wlp4s0: associate with a0:f3:c1:87:a8:f2 (try 1/3)
- [ 16.871164] wlp4s0: RX AssocResp from a0:f3:c1:87:a8:f2 (capab=0x411 status=0 aid=4)
- [ 16.871212] wlp4s0: associated
- [ 16.871255] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
- [ 32.066317] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 32.066327] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
- [ 32.066333] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
- [ 32.066337] usb 3-1: USB disconnect, device number 2
- [ 32.066339] usb 3-1: unregistering device
- [ 32.066341] usb 3-1: unregistering interface 3-1:1.0
- [ 32.077436] usb 3-1: usb_disable_device nuking all URBs
- [ 32.181188] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 34.219304] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 34.219316] ehci-pci 0000:00:12.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 34.219324] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 34.323182] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 34.323194] ehci-pci 0000:00:12.2: port 1 low speed --> companion
- [ 34.374186] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 34.374209] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 34.374215] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 34.374220] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 34.478186] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 34.478192] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 34.478199] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 34.478204] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 34.582185] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 34.604069] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000311
- [ 34.655180] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 34.706287] usb 3-1: new low-speed USB device number 3 using ohci_hcd
- [ 34.729891] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000313
- [ 34.780179] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 34.852359] usb 3-1: skipped 1 descriptor after interface
- [ 34.854358] usb 3-1: default language 0x0409
- [ 34.860361] usb 3-1: udev 3, busnum 3, minor = 258
- [ 34.860366] usb 3-1: New USB device found, idVendor=046d, idProduct=c05f
- [ 34.860368] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 34.860371] usb 3-1: Product: USB Optical Mouse
- [ 34.860373] usb 3-1: Manufacturer: Logitech
- [ 34.860585] usb 3-1: usb_probe_device
- [ 34.860588] usb 3-1: configuration #1 chosen from 1 choice
- [ 34.862344] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
- [ 34.862395] usbhid 3-1:1.0: usb_probe_interface
- [ 34.862398] usbhid 3-1:1.0: usb_probe_interface - got id
- [ 34.868582] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input9
- [ 34.868752] hid-generic 0003:046D:C05F.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
- [ 34.868793] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 63.630276] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 63.630286] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
- [ 63.630293] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
- [ 63.630296] usb 3-1: USB disconnect, device number 3
- [ 63.630298] usb 3-1: unregistering device
- [ 63.630300] usb 3-1: unregistering interface 3-1:1.0
- [ 63.642427] usb 3-1: usb_disable_device nuking all URBs
- [ 63.746288] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 65.783243] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 65.783254] ehci-pci 0000:00:12.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 65.783262] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 65.887182] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 65.887193] ehci-pci 0000:00:12.2: port 1 low speed --> companion
- [ 65.938189] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 65.938215] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 65.938222] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 65.938228] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 66.042176] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 66.042182] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 66.042189] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 66.042194] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 66.146112] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 66.167655] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000311
- [ 66.218179] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 66.269182] usb 3-1: new low-speed USB device number 4 using ohci_hcd
- [ 66.292719] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000313
- [ 66.343151] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 66.414369] usb 3-1: skipped 1 descriptor after interface
- [ 66.416369] usb 3-1: default language 0x0409
- [ 66.422371] usb 3-1: udev 4, busnum 3, minor = 259
- [ 66.422376] usb 3-1: New USB device found, idVendor=046d, idProduct=c05f
- [ 66.422379] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 66.422382] usb 3-1: Product: USB Optical Mouse
- [ 66.422384] usb 3-1: Manufacturer: Logitech
- [ 66.422596] usb 3-1: usb_probe_device
- [ 66.422603] usb 3-1: configuration #1 chosen from 1 choice
- [ 66.424393] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
- [ 66.424476] usbhid 3-1:1.0: usb_probe_interface
- [ 66.424480] usbhid 3-1:1.0: usb_probe_interface - got id
- [ 66.430658] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input10
- [ 66.430844] hid-generic 0003:046D:C05F.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
- [ 66.430895] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 95.192152] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 95.192163] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
- [ 95.192170] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
- [ 95.192174] usb 3-1: USB disconnect, device number 4
- [ 95.192176] usb 3-1: unregistering device
- [ 95.192178] usb 3-1: unregistering interface 3-1:1.0
- [ 95.205427] usb 3-1: usb_disable_device nuking all URBs
- [ 95.309182] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 97.345060] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 97.345074] ehci-pci 0000:00:12.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 97.345091] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 97.449186] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 97.449197] ehci-pci 0000:00:12.2: port 1 low speed --> companion
- [ 97.500186] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 97.500210] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 97.500215] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 97.500221] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 97.604186] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 97.604192] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 97.604199] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 97.604204] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 97.708186] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 97.729973] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000311
- [ 97.780178] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 97.831181] usb 3-1: new low-speed USB device number 5 using ohci_hcd
- [ 97.853972] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000313
- [ 97.904179] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 97.975381] usb 3-1: skipped 1 descriptor after interface
- [ 97.977378] usb 3-1: default language 0x0409
- [ 97.983379] usb 3-1: udev 5, busnum 3, minor = 260
- [ 97.983384] usb 3-1: New USB device found, idVendor=046d, idProduct=c05f
- [ 97.983387] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 97.983389] usb 3-1: Product: USB Optical Mouse
- [ 97.983391] usb 3-1: Manufacturer: Logitech
- [ 97.983531] usb 3-1: usb_probe_device
- [ 97.983535] usb 3-1: configuration #1 chosen from 1 choice
- [ 97.985295] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
- [ 97.985354] usbhid 3-1:1.0: usb_probe_interface
- [ 97.985357] usbhid 3-1:1.0: usb_probe_interface - got id
- [ 97.991623] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input11
- [ 97.991797] hid-generic 0003:046D:C05F.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
- [ 97.991845] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 118.225304] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
- [ 118.225309] vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 128.890154] EXT4-fs (sda3): re-mounted. Opts: commit=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement