Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- üíæ‡ÿ×ÿ†Ú÷·ïÿÿßûÿs[ 8.090000] gp_tp driver suspend(0)
- [ 8.090000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A]
- [ 8.090000] [lcd_suspend:311]
- [ 8.090000] [gp_enable_clock][1198] run, clock_name=[READLTIME_ABT]
- [ 8.090000] [gp_enable_clock][1198] run, clock_name=[APBDMA_C]
- [ 8.090000] Nand app driver suspend!
- [ 8.090000] **** Suppose to disable Nand/BCH clock here!!
- [ 8.100000] dram save 4198 pages
- [ 8.100000] maxarea 0x005a0000(0x00660000) lowmem_maxarea 0x005a0000(0x00660000)
- [ 8.100000] zonetbl 2 exttbl 3 dramtbl 73
- [ 8.100000] GPL32900 system timer init, PCLK(arm_apb)[90000000]Prescaler[89]LDR[1
- 0000]
- [ 8.100000] Nand app driver resume!
- [ 8.100000] clk_sys_ahb_freq[160000000]
- [ 8.100000] Nand MainID:0xda98
- [ 8.100000] Nand VendorID:0x14761590
- [ 8.100000] Nand MainID:0xda98
- [ 8.100000] Nand VendorID:0x14761590
- [ 8.100000] ==Scan Nand Pad OK!!==
- [ 8.100000] Main ID:0xda98
- [ 8.100000] Vendor ID:0x14761590
- [ 8.100000] nand_info.btldr_page_size: 0x800
- [ 8.100000] nand_info.bthdr_page_size: 0x400
- [ 8.100000] nand_info.block_size: 0x40
- [ 8.100000] nand_info.bthdr_bch: 0x0
- [ 8.100000] nand_info.btldr_bch: 0x3
- [ 8.100000] nand_info.addr_cycle: 0x5
- [ 8.100000] nand_info.NoFSSize: 0x0
- [ 8.100000] nand_info.total_MB_size: 0x100
- [ 8.100000] <<<<<<-----=== BootHeader Config Information! ====----->>>>>
- [ 8.100000] ECC threshold bit numer: 0xd
- [ 8.100000] gSTNandConfigInfo.uiAppStart: 0x2
- [ 8.100000] gSTNandConfigInfo.uiAppSize: 0x100
- [ 8.100000] gSTNandConfigInfo.uiAppSparePercent: 0x8
- [ 8.100000] gSTNandConfigInfo.uiDataStart: 0x122
- [ 8.100000] gSTNandConfigInfo.uiNoFSAreaSize: 0x0
- [ 8.100000] gSTNandConfigInfo.uiBankSize: 0x200
- [ 8.100000] gSTNandConfigInfo.uiBankRecSize: 0x40
- [ 8.100000] gSTNandConfigInfo.uiPartitionNum: 0x0
- [ 8.100000] <<<<<<-----=== Get Config Information End! ====----->>>>>
- [ 8.100000] gSTNandAppHalInfo.wPageSize: 0x800
- [ 8.100000] gSTNandAppHalInfo.wBlkPageNum: 0x40
- [ 8.100000] gSTNandAppHalInfo.wNandBlockNum: 0x800
- [ 8.100000] gSTNandAppCfgInfo.uiAppStart: 0x2
- [ 8.100000] gSTNandAppCfgInfo.uiAppSize: 0x100
- [ 8.100000] gSTNandAppCfgInfo.uiAppSpareStart: 0x102
- [ 8.100000] gSTNandAppCfgInfo.uiAppSparePercent: 0x8
- [ 8.100000] gSTNandAppCfgInfo.uiAppSpareSize: 0x20
- [ 8.100000] gSTNandAppCfgInfo.uiAppSpareEnd: 0x122
- [ 8.100000] ------- APP initial succeed!! ---------
- [ 8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_C]
- [ 8.100000] [auo_a043fl01_resume_init][283] LCD CLOCK=9000000 Hz
- [ 8.100000] [gp_enable_clock][1198] run, clock_name=[READLTIME_ABT]
- [ 8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A]
- [ 8.100000] [gp_enable_clock][1198] run, clock_name=[APBDMA_A]
- [ 8.100000] gp_tp driver resume(0)
- [ 8.110000] Restarting tasks ... done.
- - server format:[ 8.350000] I2S = 0x10c424
- sample rate = 48000 Hz
- initializing...
- InnoLogo: RTC Alarm Time Second = 0
- InnoLogo: headphone = 0
- IOCtrl: devmem 0x9301F038 32 0x0000037F
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo: headphone = 0
- InnoLogo Result: 0
- ===============================
- ===== Snapshot End ======
- ===============================
- =======================================
- Reload nand unnecessary!
- =======================================
- =======================================
- Remount system.bin
- MTD block device found!
- System.bin mount on /dev/mtdblock1
- =======================================
- ---
- +++++++++++++++++++++++++++++++++++++++++++
- ++ _Run_Once
- +++++++++++++++++++++++++++++++++++++++++++
- SB_LOCATION=NAND
- SDCARD_PATH is: /vp_mnt/sd
- [ 11.080000] ###watchdog_init###
- [ 11.120000] input: gp-keys as /devices/platform/gp-keys/input/input1
- [ 11.640000] [SPEAKER 27]
- [ 11.770000] gsensor kxtf9 probe ok(need_rotate=1)
- 0
- [ 12.140000] UBI: attaching mtd3 to ubi3
- [ 12.150000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
- [ 12.150000] UBI: logical eraseblock size: 126976 bytes
- [ 12.160000] UBI: smallest flash I/O unit: 2048
- [ 12.160000] UBI: VID header offset: 2048 (aligned 2048)
- [ 12.170000] UBI: data offset: 4096
- [ 12.360000] UBI: attached mtd3 to ubi3
- [ 12.390000] UBI: MTD device name: "Inno_I_Storage0"
- [ 12.390000] UBI: MTD device size: 16 MiB
- [ 12.410000] UBI: number of good PEBs: 128
- [ 12.410000] UBI: number of bad PEBs: 0
- [ 12.410000] UBI: max. allowed volumes: 128
- [ 12.430000] UBI: wear-leveling threshold: 4096
- [ 12.430000] UBI: number of internal volumes: 1
- [ 12.430000] UBI: number of user volumes: 1
- [ 12.440000] UBI: available PEBs: 0
- [ 12.460000] UBI: total number of reserved PEBs: 128
- [ 12.460000] UBI: number of PEBs reserved for bad PEB handling: 2
- [ 12.470000] UBI: max/mean erase counter: 7/5
- [ 12.470000] UBI: image sequence number: 0
- [ 12.480000] UBI: background thread "ubi_bgt3d" started, PID 227
- UBI device number 3, total 128 LEBs (16252928 bytes, 15.5 MiB), available 0 LEBs (0
- bytes), LEB size 126976 bytes (124.0 KiB)
- [ 12.570000] UBIFS: recovery needed
- [ 12.630000] UBIFS: recovery completed
- [ 12.630000] UBIFS: mounted UBI device 3, volume 0, name "ubi_on_mtd3"
- [ 12.640000] UBIFS: file system size: 14348288 bytes (14012 KiB, 13 MiB, 113 LEB
- s)
- [ 12.650000] UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
- [ 12.650000] UBIFS: media format: w4/r0 (latest is w4/r0)
- [ 12.660000] UBIFS: default compressor: lzo
- [ 12.660000] UBIFS: reserved for root: 677704 bytes (661 KiB)
- [ 12.910000] MTD for InnoTab reaches here: end_mark_found() - 266
- [ 12.910000] mtdblock_open() - 331: bbt_found[1]
- Bundle title mounted successfully!
- TouchCalibrate[NAND]
- [ 13.470000] Open Function !!
- [ 13.470000] PartInfo->partNumber = 0xc,Had Partition Header!!
- Get poin[ 13.530000] app_dev_release enter!!
- tercal values successfully!
- -32821 -60 32517702 -55 20045 -1011799 65536
- TouchCalibrate: Already calibrated.!
- [ 13.620000] Open Function !!
- [ 13.620000] PartInfo->partNumber = 0xd,Had Partition Header!!
- [ 13.630000] [GSENSOR_DRV] Set gsensor cal data! deltaX: 88, deltaY: -14, deltaZ:
- -50
- Get gsensorcal values successful[ 13.640000] app_dev_release enter!!
- ly!
- <============gsensorcal values============>
- deltaX: 88 deltaY: -14 deltaZ: -50
- <============successed read nand data============>
- No SD card!
- Please press Enter to activate this console. #######################################
- #################################[ 13.900000] Open Function !!
- #######
- Desktop[ 13.900000] PartInfo->partNumber = 0x7,Had Partition Header!!
- Manager
- ##############################[ 13.910000] app_dev_release enter!!
- ################[ 13.910000] Open Function !!
- ########################[ 13.920000] PartInfo->partNumber = 0xa,Had Partition Head
- er!!
- #########
- Get e[ 13.930000] PartInfo->partNumber = 0xb,Had Partition Header!!
- nv UNIQUEKEY_FIL[ 13.930000] app_dev_release enter!!
- E_PATH fail! Use default: /vp_mnt/if/UniqueKey.bin
- Open /vp_mnt/if/UniqueKey.bin fail!
- SystemUpgrade.c: SysUpgrade_Init() ############ READ BACK CHECKING IS ENABLED!!
- SystemUpgrade.c: SysUpgrade_Init() AppHeader Info
- SystemUpgrade.c: SysUpgrade_Init() ======================================
- SystemUpgrade.c: SysUpgrade_Init() headerTag = 0x50415047
- SystemUpgrade.c: SysUpgrade_Init() imageVersion = 0x98
- SystemUpgrade.c: SysUpgrade_Init() [ 13.980000] [SPEAKER 27]
- headerSize = 16384
- SystemUpgrade.c: SysUpgrade_Init() totalAppSize = 33554432
- SystemUpgrade.c: SysUpgrade_Init() totalPartNumber = 0xf
- SystemUpgrade.[ 13.990000] [SPEAKER 0]
- c: SysUpgrade_Init() checkSum = 0x0
- SystemUpgrade.c: SysUpgrade_Init() SysUpgrade_Init() success!! version1 partition is
- selected.
- SystemUpgrade.c: SysUpgrade_Init() +++++++++++++++++++++++++++++++++++++++++++++++++
- ++
- SystemUpgrade.c: SysUpgrade_Init() own : v7
- SystemUpgrade.c: SysUpgrade_Init() loader_1 : v7
- SystemUpgrade.c: SysUpgrade_Init() loader_2 : v0
- SystemUpgrade.c: SysUpgrade_Init() kernel_1 : v7
- SystemUpgrade.c: SysUpgrade_Init() kernel_2 : v0
- SystemUpgrade.c: SysUpgrade_Init() fastboot_1 : v7
- SystemUpgrade.c: SysUpgrade_Init() fastboot_2 : v0
- SystemUpgrade.c: SysUpgrade_Init() system_1 : v7
- SystemUpgrade.c: SysUpgrade_Init() system_2 : v0
- SystemUpgrade.c: SysUpgrade_Abort() Abort!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- desktopManager: signalApp(7)
- desktopManager: signalApp(): bundle_pid=0, title_pid=0, title_loc=-
- ===================Launch BUNDLE===================
- phonejack_thread: start
- desktopManager: detected NAND cart insert...
- vfork_system("nand_mount.sh add")
- key_thread: start
- vfork_system("/system/lib/vtech/_Run_Bundle")
- /system/bin/vtech/nand_mount.sh add
- ---
- +++++++++++++++++++++++++++++++++++++++++++
- ++ _Run_Bundle
- +++++++++++++++++++++++++++++++++++++++++++
- +++ Run Bundle
- vfork_system("/system/lib/vtech/_Run_Bundle") returns 0
- Desktop Manager: Initilaize OK
- [ 14.300000] vmtd_fops_open(): VMTD open
- [ 14.320000] [INNOTAB_NAND] FUNC(innotab_nand_init) LINE(222) nand card not insert
- ed!!
- VMTD_IOC_ADD_DEV error: dev[1]
- [ 14.330000] vmtd_fops_release(): VMTD release
- Add device failure ...
- umount: can't umount /vp_mnt/cart: Invalid argument
- vfork_system("nand_mount.sh add") returns 1
- 19700101000009
- >>> appswitch: pop and exec below app, 1 remain in stack.
- >>> exec_argv[0] = "++NoHome"
- >>> exec_argv[1] = "./clock.sh"
- >>> exec_argv[2] = "-s"
- app launch successfully: pid=295
- wait_processes_terminate(295) -- start
- desktopManager: detected NAND cart remove...
- desktopManager: signalApp(3)
- desktopManager: signalApp(): bundle_pid=294, title_pid=0, title_loc=-
- vfork_system("nand_mount.sh remove")
- /system/bin/vtech/nand_mount.sh remove
- umount: can't umount /vp_mnt/cart: No such file or directory
- /vp_mnt/cart: No such file or directory
- rmdir: '/vp_mnt/cart': No such file or directory
- [ 16.030000] vmtd_fops_open(): VMTD open
- [ 16.030000] innotab_nand_chip_del_mtd() - 672: InnoTab NAND MTD device not found:
- 1
- VMTD_IOC[ 16.050000] vmtd_fops_release(): VMTD release
- _DEL_MTD error: dev[1]
- [ 16.080000] vmtd_fops_open(): VMTD open
- [ 16.100000] innotab_nand_chip_release() - 480: InnoTab NAND MTD device not found:
- 1
- VMTD_IOC[ 16.120000] vmtd_fops_release(): VMTD release
- _DEL_DEV error: dev[1]
- vfork_system("nand_mount.sh remove") returns 255
- Register Parser <Quick Time File Format>
- Register Parser <.MP3 File Parser>
- Register Parser <.WAV File Parser>
- Register Parser <AMR/AMR-WB File Parser>
- Register Parser <.APE File Parser>
- Register Parser <.AAC File Parser>
- setting Clock.
- vfork_system("hwclock -w")
- [ 18.550000] [arch/arm/mach-gpl32900/rtc/gp_rtc.c:gp_rtcdrv_set_time] :
- [ 18.560000] ====>111 0 1 0 0 13
- vfork_system("hwclock -w") returns 0
- ================= the last orientation is portrait ===================
- Received terminate message!
- fade in last step *************** mStepAlphaValue = 0
- fade in send message *************** mStepAlphaValue = -16
- Loading Screen Exit....
- starting pid 263, tty '': '-/bin/sh'
- / #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement