API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 11th, 2011
575
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.62 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.1.6 (Apr 16 2009 - 16:31:59)
  2.  
  3. [CP0config] 0x80840483
  4. [ Baudrate] 115200
  5. Board : MSTAR TITANIA (CPU Speed 216 MHz)
  6. TB:0x81000000,MB:0x80fc0000,GD:0x80f9ffa4,SP:0x80f9ff80
  7. [184] Copy "kernel (2175901 bytes)" from 0x00b40000 to 0x80c00000
  8. [394] ...done (10361 KB/s)
  9. [396] Copy "lgapp (6727644 bytes)" from 0x00dc0000 to 0x82000000
  10. [1034] ...done (10544 KB/s)
  11. compressed data violation - ret=-4, total=14680064, new_len=49914263, dst_len=204800
  12. decompressed size=0 is different with 14884864
  13. read filesystem type
  14. This is not xip image!
  15. [5124] ## Booting image at 80c00000 ...
  16. Image Name: MIPS Linux-2.6.26
  17. Image Type: MIPS Linux Kernel Image (lzo compressed)
  18. Data Size: 2175837 Bytes = 2.1 MB
  19. Load Address: 80400000
  20. Entry Point: 80658eb0
  21. Uncompressing Kernel Image ... OK
  22.  
  23. [5477] Starting kernel ...
  24.  
  25. [ 0.000000] Wasting 71616 bytes for tracking 2238 unused pages
  26. [ 0.000000] Zone PFN ranges:
  27. [ 0.000000] DMA 1023 -> 28928
  28. [ 0.000000] Normal 28928 -> 28928
  29. [ 0.000000] Movable zone start PFN for each node
  30. [ 0.000000] early_node_map[2] active PFN ranges
  31. [ 0.000000] 0 1023 -> 3261
  32. [ 0.000000] 0 16896 -> 28928
  33. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 14051
  34. [ 0.000000] Kernel command line: root=/dev/mtdblock3 rootfstype=squashfs ro lpj=105984 console=ttyS0,115200n8r host=saturn6 noinitrd ramdisk=0 console=ttyS0,115200n8r ip=156.147.69.181:192.168.0.1:192.168.0.10:192.168.0.1:255.255.255.0 xipfs=15 fontxipfs=0 memsize=128
  35. [ 0.000000] Primary instruction cache 4kB, VIPT, 4-way, linesize 16 bytes.
  36. [ 0.000000] Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
  37. [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
  38. [ 0.000000] CPU freq count = 108000000
  39. [ 0.000000] CPU frequency 216.00 MHz
  40. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  41. [ 0.001000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  42. [ 0.019000] Memory: 50164k/51208k available (2422k kernel code, 984k reserved, 1752k data, 112k init, 0k highmem)
  43. [ 0.020000] SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  44. [ 0.021000] Calibrating delay loop (skipped)... 211.96 BogoMIPS preset
  45. [ 0.022000] Mount-cache hash table entries: 512
  46. [ 0.044000] net_namespace: 192 bytes
  47. [ 0.046000] NET: Registered protocol family 16
  48. [ 0.082000] SCSI subsystem initialized
  49. [ 0.086000] usbcore: registered new interface driver usbfs
  50. [ 0.089000] usbcore: registered new interface driver hub
  51. [ 0.091000] usbcore: registered new device driver usb
  52. [ 0.108000] BOOTSTRAP 11(2)
  53. [ 0.113000] NET: Registered protocol family 2
  54. [ 0.127000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  55. [ 0.138000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  56. [ 0.146000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  57. [ 0.153000] TCP: Hash tables configured (established 2048 bind 2048)
  58. [ 0.160000] TCP reno registered
  59. [ 0.166000] NET: Registered protocol family 1
  60. [ 0.256000] squashfs: version 3.4 (2008/08/26) Phillip Lougher
  61. [ 0.266000] NTFS driver 2.1.29 [Flags: R/O].
  62. [ 0.276000] JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
  63. [ 0.291000] msgmni has been set to 98
  64. [ 0.298000] io scheduler noop registered (default)
  65. [ 0.306000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  66. [ 0.320000] serial8250: ttyS0 at I/O 0xbf801300 (irq = 8) is a 16550
  67. [ 0.356000] loop: module loaded
  68. [ 0.361000] Driver 'sd' needs updating - please use bus_type methods
  69. [ 0.372000] NAND device: Manufacturer ID: 0xad, Chip ID: 0x76 (Hynix NAND 64MiB 3,3V 8-bit)
  70. [ 0.382000] Loading nand bad block info...
  71. [ 0.386000] Loading nand bad block info(00000000+00004000)...
  72. [ 0.396000] nand_bbm_info_load: Loading nand bad block info...ok
  73. [ 0.402000] nand bad block information:
  74. [ 0.406000] magic = 0x8192a5a6
  75. [ 0.410000] bad block count = 0
  76. [ 0.413000] assign index = 4095
  77. [ 0.417000] Mstar nand-flash partition definition
  78. [ 0.422000] mtd info : # of partition = 19
  79. [ 0.427000] Creating 19 MTD partitions on "NAND 64MiB 3,3V 8-bit":
  80. [ 0.434000] 0x00000000-0x00020000 : "bbminfo"
  81. [ 0.446000] 0x00020000-0x00060000 : "boot"
  82. [ 0.456000] 0x00080000-0x000a0000 : "mtdinfo"
  83. [ 0.467000] 0x000a0000-0x00220000 : "rootfs"
  84. [ 0.477000] 0x00220000-0x00240000 : "model"
  85. [ 0.488000] 0x00240000-0x00740000 : "emanual"
  86. [ 0.498000] 0x00740000-0x00b40000 : "ezcal"
  87. [ 0.508000] 0x00b40000-0x00dc0000 : "kernel"
  88. [ 0.519000] 0x00dc0000-0x016c0000 : "lgapp"
  89. [ 0.529000] 0x016c0000-0x01a40000 : "lgres"
  90. [ 0.539000] 0x01a40000-0x02340000 : "lgfont"
  91. [ 0.550000] 0x02340000-0x025c0000 : "kernel"
  92. [ 0.560000] 0x025c0000-0x02ec0000 : "lgapp"
  93. [ 0.570000] 0x02ec0000-0x03240000 : "lgres"
  94. [ 0.581000] 0x03240000-0x03b40000 : "lgfont"
  95. [ 0.591000] 0x03b40000-0x03b60000 : "recdb"
  96. [ 0.601000] 0x03b60000-0x03ba0000 : "system"
  97. [ 0.612000] 0x03ba0000-0x03e00000 : "user"
  98. [ 0.622000] 0x03e00000-0x04000000 : "reserved"
  99. [ 0.633000] Disable power down for H.264 firmware
  100. [ 0.638000] GE driver inits
  101. [ 0.641000] GOP driver inits
  102. [ 0.644000] GPIO Init(LCD)
  103. [ 0.656000] [SCALER][000132] _mod_scaler_init
  104. [ 0.661000] [MADMOD][002762] _mod_mad_init is invoked
  105. [ 0.667000] init 160
  106. [ 0.669000] [MVDMOD][000610] H264 bit-stream buffer addr 0xa9c00000; size 4194304
  107. [ 0.678000] CI driver inits
  108. [ 0.681000] [RLDMOD][000430] mod_rld_init is invoked
  109. [ 0.687000] [RLDMOD][000434] call register_chrdev_region
  110. [ 0.693000] [RLDMOD][000463] Init RLD successfully
  111. [ 0.699000] [TTX_DRV][00559]init 170
  112. [ 0.703000] [VE_DRV][00469]MDrv_VE_Module_Init is invoked
  113. [ 0.708000] [VE_DRV][00473]call register_chrdev_region
  114. [ 0.714000] [VE_DRV][00499]Init VE successfully
  115. [ 0.719000] MDrv_CC_Init
  116. [ 0.722000] init 172
  117. [ 0.724000] <MHal_JPD_Initialize>
  118. [ 0.728000] BT_USB initialized
  119. [ 0.731000] Hello~ this is kernel module on MIPS MSB
  120. [ 0.737000] BT_USB for INSTANT_INTERRUPT scheme rev2
  121. [ 0.742000] SCHED: init_sched
  122. [ 0.746000] bt_usb: Bluetooth USB driver for LGE DTV
  123. [ 0.753000] usbcore: registered new interface driver csr_usb
  124. [ 0.759000] bt_usb: BT USB driver registered
  125. [ 0.763000] BlueCore transport started... May
  126. [ 0.774000] TCP cubic registered
  127. [ 0.778000] NET: Registered protocol family 17
  128. [ 0.787000] Adding user_initcall[0] = 0x80581430
  129. [ 0.792000] Adding user_initcall[1] = 0x80581410
  130. [ 0.797000] Adding user_initcall[2] = 0x80584694
  131. [ 0.809000] VFS: Mounted root (squashfs filesystem) readonly.
  132. [ 0.817000] Freeing unused kernel memory: 112k freed
  133.  
  134. starting pid 219, tty '': '/etc/init.d/rcS'
  135. [ 1.251000] Algorithmics/MIPS FPU Emulator v1.5
  136. [ 1.284000] CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0
  137. [ 1.410000] jffs2_scan_dirent_node(): Node CRC failed on node at 0x0000c3e8: Read 0xffffffff, calculated 0xc706e9a1
  138. [ 1.428000] Empty flash at 0x0000c414 ends at 0x0000c600
  139. [ 1.435000] Empty flash at 0x0000ccfc ends at 0x0000ce00
  140. [ 1.441000] jffs2_scan_inode_node(): CRC failed on node at 0x0000e1d4: Read 0xffffffff, calculated 0x8976e0eb
  141. [ 1.455000] Empty flash at 0x0000e218 ends at 0x0000e400
  142. [ 1.489000] Empty flash at 0x00084914 ends at 0x00084a00
  143. [ 1.495000] jffs2_scan_dirent_node(): Node CRC failed on node at 0x00084de0: Read 0xffffffff, calculated 0x3230481a
  144. [ 1.508000] Empty flash at 0x00084e10 ends at 0x00085000
  145. [ 1.570000] Empty flash at 0x00139370 ends at 0x00139400
  146. [ 1.577000] Empty flash at 0x0013b410 ends at 0x0013b600
  147. [ 1.594000] Empty flash at 0x00165a24 ends at 0x00165c00
  148. [ 1.603000] jffs2_scan_inode_node(): CRC failed on node at 0x0016b7dc: Read 0xffffffff, calculated 0x2d7e04b6
  149. [ 1.614000] Empty flash at 0x0016b900 ends at 0x0016ba00
  150. [ 1.626000] Empty flash at 0x00174e60 ends at 0x00175000
  151. [ 1.645000] Empty flash at 0x00195df4 ends at 0x00195e00
  152. [ 1.651000] Empty flash at 0x00196c78 ends at 0x00196e00
  153. [ 1.669000] Empty flash at 0x001c0a74 ends at 0x001c0c00
  154. [ 1.685000] Empty flash at 0x001e0e60 ends at 0x001e1000
  155. [ 1.705000] jffs2_scan_inode_node(): CRC failed on node at 0x0021c7d8: Read 0xffffffff, calculated 0x50545432
  156. [ 1.718000] Empty flash at 0x0021c84c ends at 0x0021ca00
  157. [ 2.064000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  158. [ 2.075000] usbcore: registered new interface driver pegasus
  159. [ 2.119000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  160. [ 2.213000] usbcore: registered new interface driver asix
  161. [ 2.294000] usbcore: registered new interface driver dm9601
  162. [ 2.417000] fuse init (API version 7.9)
  163. [ 2.737000] cramfs: checking physical address 0x7100000 for linear cramfs image
  164. [ 2.745000] cramfs: linear cramfs image appears to be 14536 KB in size
  165. Non-LG Driver Mode!
  166. MAPS_INFO_T Init Error!!
  167. 002.953:__main()] >> Entering osadap_init(0,0)
  168. 002.954:__main()] >> Structure size :: mt(36), st(28), qt(52), tt(128)
  169. Memory Caller Tracer is off
  170. 002.964:__main()] << Exiting osadap_init()
  171. 002.965:__main()] >> InitPool ]]] [0x2ab29000-0x2cb29000]
  172. 002.966:__main()] SM_MAT_POOL[ 8] = 0x2ab29000(0x028000)
  173. 002.966:__main()] SM_MAT_POOL[ 16] = 0x2ab51000(0x0a0000)
  174. 002.967:__main()] SM_MAT_POOL[ 32] = 0x2abf1000(0x0f0000)
  175. 002.968:__main()] SM_MAT_POOL[ 64] = 0x2ace1000(0x0a0000)
  176. 002.969:__main()] SM_MAT_POOL[128] = 0x2ad81000(0x640000)
  177. 002.969:__main()] SM_MAT_POOL[256] = 0x2b3c1000(0x780000)
  178. 002.970:__main()] >> InitBuddy ]] Addr=0x2bb41000, Size=0xfe8000
  179. 002.976:__main()] >> Total Free Heap Size = 0x1fce000
  180. 002.981:__main()] MODEL NAME : DVB-SATURN
  181. 002.986:__main()] OTA_ID : HE_DTV_GP_M_AAAAABAA[HE_DTV_GP_M_AAAAABAA]
  182. 002.995:RootInit] Start root... [ 2.994]
  183. 002.999:RootInit] H/W port ---- HD/FHD panel detect
  184.  
  185. 003.041:RootInit] NVM Backup CRC data is invalid
  186. 003.059:RootInit] NVM Backup Data is invalid => Skip
  187. 
  188. 003.060:RootInit] NVM] ID set as 0xa0 : PageSize 128
  189. 003.135:Keyboard] Enter Product mode if you want exit form Product, input "debug"
  190. [ 3.145000] JFFS2 notice: (230) check_node_data: wrong data CRC in data node at 0x00196710: read 0x7809b308, calculated 0x15da3538.
  191. [ 3.207000] JFFS2 notice: (230) check_node_data: wrong data CRC in data node at 0x00195b6c: read 0xd0b511a3, calculated 0x241034d0.
  192. [ 3.221000] JFFS2 notice: (230) check_node_data: wrong data CRC in data node at 0x00138a7c: read 0xe252b863, calculated 0xfa792a95.
  193. 003.234:RootInit] Sensor LGE TV : 60 , Sensor Module : 255
  194. 003.235:RootInit] Touch Sensor Value is different, set to default value..
  195. [ 3.379000] [SYS][000127] MDrv_SYS_SetPanelInfo
  196. 003.404:RootInit] DDM_INIT_OEMChipTask Done!
  197. 003.729:RootInit] FILE OPEN FAIL , u-boot-spi.bin does not exist
  198. 003.740:RootInit]  [PR[ 3.743000] [MADMOD][002139] _mod_mad_open is invoked
  199. J_NAME: dvb_saturn6] <UI[ 3.752000] [MADMOD][002241] ioctl: receive MDrv_MAD_INITIALIZE_MODULE ...
  200. _MAIN_PreInitializeCountry:2613>
  201. 003.741:RootInit]  [RMM_GROUP_CODE: 0x4555: EU] <UI_MAIN_PreInitializeCountry:2615>
  202. 003.742:RootInit]  [RMM_COUNTRY_CODE: 0x554b: UK] <UI_MAIN_PreInitializeCountry:2617>
  203. [ 3.885000] MDrv_MAD_Se_SetMemInfo: DSPMadBaseBufferAdr[DSP_SE] = 0x00C00000
  204. [ 3.885000]
  205. MDrv_MAD_ISRInit(101)...
  206. [ 4.009000] MDrv_MAD_SoundEffectOnOff(1)...
  207. [ 4.310000] TSP FW=0xbc0000
  208. [ 4.331000] [SCALER][000180] _mod_scaler_open
  209. [ 4.376000] [HDMI][01494] ========enInputPortType==========0
  210. [ 4.376000] 004.385:tFEInit ]
  211. 004.386:tFEInit ] MHal_HDCP_InitProductionKey ed 82 e6 92 c5
  212. [42m[F_ ___] FE_InitializeModule(United Kingdom) START
  213. 004.386:tFEInit ] [F_ ___] Tuner CFG : ZZ_SbBXXXXXXXXX ==> ZZ_SbBXXXXXXXXX
  214. 004.388:tFEInit ] [F_ ___] DDI_TU_Probe()
  215. 004.388:tFEInit ] [T_ DDI] Tuner Name : TDFWDRXK_DRXK
  216. 004.389:tFEInit ] [T0 DDI] PROB[ 4.422000] COLOR KILL BOUND: 08 08
  217. ING .... !!!
  218. [[ 4.427000] [VE_DRV][00313]MDrv_VE_Open is invoked
  219. 0m004.407:tUiPIn[ 4.433000] _MDrv_VE_TransferInputMux
  220. it]
  221. 004.408:tU[ 4.439000] [SYS][000127] MDrv_SYS_SetPanelInfo
  222. iPInit] ========================================[ 4.449000] GE opens successfully
  223. ========
  224. 004.40[ 4.453000] GOP opens successfully
  225. 9:tUiPInit] Power On Mode : REMOTE KEY(0x20)
  226. 004.409:tUiPInit] ================================================
  227. 004.445:RootInit] ##############gHPDDefault=0
  228. 
  229. 004.446:RootInit] OSAD: (E) There is no task configuration matching with tOEMInit
  230. 
  231. 004.481:tFEInit ] ##### DVB T/C Hybrid DRXK Probe OK !!
  232. 004.482:tFEInit ] [T0 DDI] >>> PROBE DEMOD(DRXK) OK <<<
  233. 004.482:tFEInit ] [T0 DDI] >>> PROBE ATV(TDFWDRXK) OK <<<
  234. 004.483:tFEInit ] [T0 DDI] >>> PROBE PLL(TDFWDRXK) OK <<<
  235. 004.484:tFEInit ] [F_ ___] FE_ATV_Initialize()
  236. 004.485:tFEInit ] [F_ _[ 4.514000] GwinID 3 used
  237. __] FE_DTV_Initialize()
  238. 004.964:tFEInit ] [F_ ___] FE_InitializeModule() END
  239. 004.965:tFEInit ]
  240. 004.969:tFEInit ] FE PreinitTask Done!
  241. 004.970:tFEInit ] Now task is exiting
  242. task is not thread ID
  243. OSA_DeleteTask(taskId = 11) called, tId = 11
  244. 005.046:tUiPInit] ==============================================================
  245. 005.046:tUiPInit] System activated by POWER_ON_BY_REMOTE_KEY[20]
  246. 005.047:tUiPInit] =========================================================[ 5.066000] GwinID 5 used
  247. =====
  248. 007.124:tUiPInit] ##########_MAIN_PreInitialize :: AUTO NUMBER[ 1 ]##############
  249. 007.125:tUiPInit] cableMode: 0
  250. 007.134:tUiPInit] _MAIN_PreInitialize 00000000000000000 [3D Mode: 1]
  251.  
  252. 007.134:tUiPInit] _MAIN_PreInitialize 11111111111111111 [3D Mode: 1]
  253.  
  254. 007.135:tUiPInit] Now task is exiting
  255. task is not thread ID
  256. OSA_DeleteTask(taskId = 10) called, tId = 10
  257. S API_TRIDTV_Initializ
  258. E API_TRIDTV_Initializ
  259. 007.691:RootInit] TRIDFMT CHIP LGFPGA function init....
  260.  
  261. 008.335:tCMNvmRd] Now task is exiting
  262. task is not thread ID
  263. OSA_DeleteTask(taskId = 20) called, tId = 20
  264. 008.341:RootInit]  country code: [0x554b]
  265. 008.354:RootInit] ************************************************
  266. 008.354:RootInit]  _MAIN_InitCountry [country:0x554b][RMM_COUNTRY_CODE:0x554b:UK]
  267. 008.355:RootInit] ************************************************
  268. 008.503:RootInit] Font(/mnt/lg/res/lgfont/lg_display_eu_newdingbet.utf) has opened
  269. [ 8.786000] MHal_VD_McuReset()
  270. [ 8.831000] MHal_VD_McuReset() END
  271. [ 8.835000] video format is changed (lost)
  272. [ 8.840000] [TTX_DRV][00137]
  273. [ 8.843000] [TTX_DRV][00138]open 170
  274. [ 8.847000] [TTX_DRV][00335]VBI buffer addr 0x828f5000
  275. [ 8.853000] [TTX_DRV][00337]VBI buffer parameters addr 0x82934f30
  276. [ 8.860000] [TTX_HAL][00184]Slicer buf addr:0x51ea00
  277. [ 8.865000] [TTX_HAL][00185]Slicer buf size: 0x3ff00
  278. [ 8.871000] [TTX_HAL][00191]Slicer entry: 0x1550
  279. [ 8.876000] Sync is changed (lost)
  280. [ 8.880000] [TTX_HAL][00194]Slicer buf addr: 0x828f5000
  281. [ 8.885000] [TTX_HAL][00195]Slicer buf size: 0x3ff00
  282. [ 8.891000] [TTX_HAL][00196]Slicer entry: 0x1550
  283. [ 8.900000] [TTX_DRV][00462]VMSIZE = 0x40000
  284. [ 8.905000] [TTX_DRV][00463]VBI BUF SIZE = 0x3ff00
  285. [ 8.910000] [TTX_DRV][00470]Initial ...
  286. [ 8.914000] [TTX_DRV][00495]VMSTART = 0x39158000, VMEND = 0x39198000, PFN = 0x28f5
  287. [ 8.923000] [TTX_DRV][00499]Done.
  288. 008.939:RootInit] API_AUDIO_SetTVSpeakerOnOff():: Skip mute delay(400) at boottime
  289. [ 9.020000] MDrv_MAD_DVB_PcmLevelControl:0
  290. [ 9.617000] MDrv_MAD_DVB_PcmLevelControl:1
  291. [ 9.632000] MDrv_MAD_DVB_PcmLevelControl:0
  292. [ 9.662000] MDrv_MAD_DVB_PcmLevelControl:0
  293. 009.742:tUiMain ] Model Name = GP-DVB-EU
  294.  
  295. [ 9.934000] STOP VD THREAD
  296. [ 9.939000] MDrv_MAD_DVB_PcmLevelControl:0
  297. [ 9.957000] [SCALER][001019] sc ioctl: unknown command, <-1073450017>
  298. [ 10.078000] video format is changed (found)
  299. [ 10.097000] 3D SPEED UP OPEN
  300. [ 10.122000] [TTX_HAL][00099]PAL
  301. [ 10.127000] [SCALER][001019] sc ioctl: unknown command, <-1073450017>
  302. [ 10.214000] video format is changed (found)
  303. [ 10.234000] Sync is changed (locked)
  304. [ 10.453000] PASS VD THREAD
  305. Bus error
  306.  
  307. starting pid 338, tty '/dev/console': '-/bin/sh'
  308. -/bin/sh: can't access tty; job control turned off
  309.  
  310. Processing /etc/profile...
  311.  
  312. Done
  313.  
  314. /lgsw # [ 11.603000] 3D SPEED UP CLOSE
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!