My Pastes
Public Pastes
Layout Width
Share Pastebin
Guest
Public paste!

Untitled

By: a guest | Mar 21st, 2010 | Syntax: None | Size: 25.79 KB | Hits: 45 | Expires: Never
Download | Raw | Embed | Report abuse
Copy text to clipboard
  1. drpepper@xbmc:~/temp/crystalhd/driver/linux$ sudo dmesg
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 2.6.24-27-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Mar 12 01:10:31 UTC 2010 (Ubuntu 2.6.24-27.68-generic)
  5. [    0.000000] BIOS-provided physical RAM map:
  6. [    0.000000]  BIOS-e820: 0000000000000100 - 000000000008f000 (usable)
  7. [    0.000000]  BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
  8. [    0.000000]  BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
  9. [    0.000000]  BIOS-e820: 0000000000100000 - 00000000025ae000 (usable)
  10. [    0.000000]  BIOS-e820: 0000000002687000 - 00000000026d8000 (reserved)
  11. [    0.000000]  BIOS-e820: 00000000026d8000 - 000000000f171000 (usable)
  12. [    0.000000]  BIOS-e820: 000000000f171000 - 000000000f372000 (ACPI NVS)
  13. [    0.000000]  BIOS-e820: 000000000f372000 - 000000000febd000 (usable)
  14. [    0.000000]  BIOS-e820: 000000000febd000 - 000000000febf000 (ACPI NVS)
  15. [    0.000000]  BIOS-e820: 000000000febf000 - 000000000fec0000 (ACPI data)
  16. [    0.000000]  BIOS-e820: 000000000fec0000 - 000000000feef000 (ACPI NVS)
  17. [    0.000000]  BIOS-e820: 000000000feef000 - 000000000fef1000 (usable)
  18. [    0.000000]  BIOS-e820: 000000000fef1000 - 000000000feff000 (ACPI data)
  19. [    0.000000]  BIOS-e820: 000000000feff000 - 000000000ff00000 (usable)
  20. [    0.000000]  BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
  21. [    0.000000]  BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved)
  22. [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
  23. [    0.000000]  BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved)
  24. [    0.000000] 0MB HIGHMEM available.
  25. [    0.000000] 255MB LOWMEM available.
  26. [    0.000000] Entering add_active_range(0, 0, 65280) 0 entries of 256 used
  27. [    0.000000] Zone PFN ranges:
  28. [    0.000000]   DMA             0 ->     4096
  29. [    0.000000]   Normal       4096 ->    65280
  30. [    0.000000]   HighMem     65280 ->    65280
  31. [    0.000000] Movable zone start PFN for each node
  32. [    0.000000] early_node_map[1] active PFN ranges
  33. [    0.000000]     0:        0 ->    65280
  34. [    0.000000] On node 0 totalpages: 65280
  35. [    0.000000]   DMA zone: 32 pages used for memmap
  36. [    0.000000]   DMA zone: 0 pages reserved
  37. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  38. [    0.000000]   Normal zone: 478 pages used for memmap
  39. [    0.000000]   Normal zone: 60706 pages, LIFO batch:15
  40. [    0.000000]   HighMem zone: 0 pages used for memmap
  41. [    0.000000]   Movable zone: 0 pages used for memmap
  42. [    0.000000] DMI 2.4 present.
  43. [    0.000000] ACPI: RSDP signature @ 0xC00F8000 checksum 0
  44. [    0.000000] ACPI: RSDP 000F8000, 0024 (r2 APPLE )
  45. [    0.000000] ACPI: XSDT 0FEFD1C0, 0064 (r1 APPLE   Apple00       DA       1000013)
  46. [    0.000000] ACPI: FACP 0FEFB000, 00F4 (r3 APPLE   Apple00       DA Loki       5F)
  47. [    0.000000] ACPI: DSDT 0FEF4000, 2BE5 (r1 APPLE   AppleTV    10001 INTL 20050309)
  48. [    0.000000] ACPI: FACS 0FEC0000, 0040
  49. [    0.000000] ACPI: HPET 0FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
  50. [    0.000000] ACPI: APIC 0FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
  51. [    0.000000] ACPI: MCFG 0FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
  52. [    0.000000] ACPI: ASF! 0FEF7000, 00A0 (r32 APPLE   Apple00        1 Loki       5F)
  53. [    0.000000] ACPI: SSDT 0FEF2000, 01A6 (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
  54. [    0.000000] ACPI: SSDT 0FEF3000, 0158 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
  55. [    0.000000] ACPI: SSDT 0FEF1000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
  56. [    0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine
  57. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  58. [    0.000000] ACPI: Local APIC address 0xfee00000
  59. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  60. [    0.000000] Processor #0 6:13 APIC version 20
  61. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
  62. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  63. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  64. [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  65. [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
  66. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  67. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  68. [    0.000000] ACPI: IRQ0 used by override.
  69. [    0.000000] ACPI: IRQ2 used by override.
  70. [    0.000000] ACPI: IRQ9 used by override.
  71. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  72. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  73. [    0.000000] Using ACPI (MADT) for SMP configuration information
  74. [    0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:e00f8000)
  75. [    0.000000] swsusp: Registered nosave memory region: 000000000008f000 - 0000000000090000
  76. [    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
  77. [    0.000000] swsusp: Registered nosave memory region: 00000000025ae000 - 0000000002687000
  78. [    0.000000] swsusp: Registered nosave memory region: 0000000002687000 - 00000000026d8000
  79. [    0.000000] swsusp: Registered nosave memory region: 000000000f171000 - 000000000f372000
  80. [    0.000000] swsusp: Registered nosave memory region: 000000000febd000 - 000000000febf000
  81. [    0.000000] swsusp: Registered nosave memory region: 000000000febf000 - 000000000fec0000
  82. [    0.000000] swsusp: Registered nosave memory region: 000000000fec0000 - 000000000feef000
  83. [    0.000000] swsusp: Registered nosave memory region: 000000000fef1000 - 000000000feff000
  84. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64770
  85. [    0.000000] Kernel command line: root=/dev/sda5 ro vesa video=vesafb
  86. [    0.000000] mapped APIC to ffffb000 (fee00000)
  87. [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
  88. [    0.000000] Enabling fast FPU save and restore... done.
  89. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  90. [    0.000000] Initializing CPU#0
  91. [    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
  92. [    0.000000] Detected 1000.120 MHz processor.
  93. [   44.193162] Console: colour dummy device 80x25
  94. [   44.193168] console [tty0] enabled
  95. [   44.193662] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  96. [   44.193816] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  97. [   44.202780] Memory: 243324k/261120k available (2182k kernel code, 13572k reserved, 1005k data, 368k init, 0k highmem)
  98. [   44.202805] virtual kernel memory layout:
  99. [   44.202807]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
  100. [   44.202809]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  101. [   44.202811]     vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
  102. [   44.202814]     lowmem  : 0xc0000000 - 0xcff00000   ( 255 MB)
  103. [   44.202816]       .init : 0xc0423000 - 0xc047f000   ( 368 kB)
  104. [   44.202818]       .data : 0xc03218ca - 0xc041cdc4   (1005 kB)
  105. [   44.202820]       .text : 0xc0100000 - 0xc03218ca   (2182 kB)
  106. [   44.202859] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  107. [   44.202923] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
  108. [   44.203173] hpet clockevent registered
  109. [   44.203213] Calibrating delay loop (skipped), using tsc calculated value.. 2000.24 BogoMIPS (lpj=4000480)
  110. [   44.203256] Security Framework initialized
  111. [   44.203271] SELinux:  Disabled at boot.
  112. [   44.203299] AppArmor: AppArmor initialized
  113. [   44.203309] Failure registering capabilities with primary security module.
  114. [   44.203328] Mount-cache hash table entries: 512
  115. [   44.203536] Initializing cgroup subsys ns
  116. [   44.203550] Initializing cgroup subsys cpuacct
  117. [   44.203571] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
  118. [   44.203589] CPU: L1 I cache: 32K, L1 D cache: 32K
  119. [   44.203598] CPU: L2 cache: 2048K
  120. [   44.203607] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
  121. [   44.203626] Compat vDSO mapped to ffffe000.
  122. [   44.203648] Checking 'hlt' instruction... OK.
  123. [   44.219742] SMP alternatives: switching to UP code
  124. [   44.222695] Freeing SMP alternatives: 11k freed
  125. [   44.222877] Early unpacking initramfs... done
  126. [   44.778731] ACPI: Core revision 20070126
  127. [   44.778808] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  128. [   44.781154] CPU0: Intel Genuine Intel(R) processor              1.00GHz stepping 08
  129. [   44.781192] Total of 1 processors activated (2000.24 BogoMIPS).
  130. [   44.781409] ENABLING IO-APIC IRQs
  131. [   44.781628] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  132. [   44.926557] Brought up 1 CPUs
  133. [   44.926595] CPU0 attaching sched-domain:
  134. [   44.926599]  domain 0: span 01
  135. [   44.926602]   groups: 01
  136. [   44.926842] net_namespace: 64 bytes
  137. [   44.926859] Booting paravirtualized kernel on bare hardware
  138. [   44.927605] Time: 20:13:33  Date: 03/21/10
  139. [   44.927644] NET: Registered protocol family 16
  140. [   44.927952] EISA bus registered
  141. [   44.927964] ACPI: bus type pci registered
  142. [   44.928336] PCI: Using configuration type 1
  143. [   44.928358] Setting up standard PCI resources
  144. [   44.930504] ACPI: EC: Look up EC in DSDT
  145. [   44.932118] ACPI: BIOS _OSI(Linux) query ignored
  146. [   44.932127] ACPI: DMI System Vendor: Apple Inc.
  147. [   44.932134] ACPI: DMI Product Name: AppleTV1,1
  148. [   44.932140] ACPI: DMI Product Version: 1.0
  149. [   44.932146] ACPI: DMI Board Name: Mac-F4228DC8
  150. [   44.932153] ACPI: DMI BIOS Vendor: Apple Computer, Inc.
  151. [   44.932160] ACPI: DMI BIOS Date: 12/22/09
  152. [   44.932166] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
  153. [   44.932175] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
  154. [   44.932482] ACPI: Interpreter enabled
  155. [   44.932491] ACPI: (supports S0 S4)
  156. [   44.932511] ACPI: Using IOAPIC for interrupt routing
  157. [   44.936545] ACPI: PCI Root Bridge [PCI0] (0000:00)
  158. [   44.937214] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
  159. [   44.937226] PCI quirk: region 0500-053f claimed by ICH6 GPIO
  160. [   44.937996] PCI: Transparent bridge - 0000:00:1e.0
  161. [   44.938046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  162. [   44.938574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  163. [   44.938769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  164. [   44.942861] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
  165. [   44.943004] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  166. [   44.943145] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
  167. [   44.943282] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  168. [   44.943418] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
  169. [   44.943553] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  170. [   44.943689] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
  171. [   44.943824] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
  172. [   44.944007] Linux Plug and Play Support v0.97 (c) Adam Belay
  173. [   44.944061] pnp: PnP ACPI init
  174. [   44.944076] ACPI: bus type pnp registered
  175. [   44.945795] pnp: PnP ACPI: found 8 devices
  176. [   44.945804] ACPI: ACPI bus type pnp unregistered
  177. [   44.945814] PnPBIOS: Disabled by ACPI PNP
  178. [   44.946153] PCI: Using ACPI for IRQ routing
  179. [   44.946161] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  180. [   44.954512] NET: Registered protocol family 8
  181. [   44.954521] NET: Registered protocol family 20
  182. [   44.954576] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  183. [   44.954589] hpet0: 3 64-bit timers, 14318180 Hz
  184. [   44.955642] AppArmor: AppArmor Filesystem Enabled
  185. [   44.958468] Time: tsc clocksource has been installed.
  186. [   44.958492] Switched to high resolution mode on CPU 0
  187. [   44.966480] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
  188. [   44.966493] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
  189. [   44.966504] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
  190. [   44.966514] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
  191. [   44.966524] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
  192. [   44.966535] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
  193. [   44.966552] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
  194. [   44.966566] system 00:06: ioport range 0x680-0x6ef has been reserved
  195. [   44.966576] system 00:06: ioport range 0x800-0x80f has been reserved
  196. [   44.966585] system 00:06: ioport range 0x810-0x817 has been reserved
  197. [   44.966594] system 00:06: ioport range 0x400-0x47f has been reserved
  198. [   44.966603] system 00:06: ioport range 0x500-0x53f has been reserved
  199. [   44.966612] system 00:06: ioport range 0x1640-0x164f has been reserved
  200. [   44.997235] PCI: Failed to allocate mem resource #6:20000@20000000 for 0000:01:00.0
  201. [   44.997247] PCI: Bridge: 0000:00:01.0
  202. [   44.997252]   IO window: disabled.
  203. [   44.997261]   MEM window: 20000000-21ffffff
  204. [   44.997269]   PREFETCH window: 10000000-1fffffff
  205. [   44.997278] PCI: Bridge: 0000:00:1c.0
  206. [   44.997284]   IO window: disabled.
  207. [   44.997294]   MEM window: 22000000-224fffff
  208. [   44.997303]   PREFETCH window: disabled.
  209. [   44.997314] PCI: Bridge: 0000:00:1e.0
  210. [   44.997322]   IO window: 1000-1fff
  211. [   44.997332]   MEM window: 22500000-225fffff
  212. [   44.997341]   PREFETCH window: disabled.
  213. [   44.997365] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
  214. [   44.997379] PCI: Setting latency timer of device 0000:00:01.0 to 64
  215. [   44.997410] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
  216. [   44.997425] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  217. [   44.997442] PCI: Setting latency timer of device 0000:00:1e.0 to 64
  218. [   44.997458] NET: Registered protocol family 2
  219. [   45.034458] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  220. [   45.034772] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  221. [   45.034859] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  222. [   45.034943] TCP: Hash tables configured (established 8192 bind 8192)
  223. [   45.034952] TCP reno registered
  224. [   45.046525] checking if image is initramfs... it is
  225. [   46.138619] Freeing initrd memory: 7176k freed
  226. [   46.139528] audit: initializing netlink socket (disabled)
  227. [   46.139558] audit(1269202414.832:1): initialized
  228. [   46.142875] VFS: Disk quotas dquot_6.5.1
  229. [   46.143008] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  230. [   46.143231] io scheduler noop registered
  231. [   46.143239] io scheduler anticipatory registered
  232. [   46.143246] io scheduler deadline registered
  233. [   46.143268] io scheduler cfq registered (default)
  234. [   46.143503] PCI: Setting latency timer of device 0000:00:01.0 to 64
  235. [   46.143548] assign_interrupt_mode Found MSI capability
  236. [   46.143593] Allocate Port Service[0000:00:01.0:pcie00]
  237. [   46.143708] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  238. [   46.143775] assign_interrupt_mode Found MSI capability
  239. [   46.143834] Allocate Port Service[0000:00:1c.0:pcie00]
  240. [   46.143890] Allocate Port Service[0000:00:1c.0:pcie02]
  241. [   46.144257] isapnp: Scanning for PnP cards...
  242. [   46.498124] isapnp: No Plug & Play device found
  243. [   46.541870] Real Time Clock Driver v1.12ac
  244. [   46.542196] hpet_resources: 0xfed00000 is busy
  245. [   46.542227] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  246. [   46.543986] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  247. [   46.544103] input: Macintosh mouse button emulation as /devices/virtual/input/input0
  248. [   46.544318] PNP: No PS/2 controller found. Probing ports directly.
  249. [   46.545201] i8042.c: No controller found.
  250. [   46.553154] mice: PS/2 mouse device common for all mice
  251. [   46.553320] EISA: Probing bus 0 at eisa.0
  252. [   46.553335] Cannot allocate resource for EISA slot 1
  253. [   46.553343] Cannot allocate resource for EISA slot 2
  254. [   46.553377] EISA: Detected 0 cards.
  255. [   46.553385] cpuidle: using governor ladder
  256. [   46.553392] cpuidle: using governor menu
  257. [   46.553533] NET: Registered protocol family 1
  258. [   46.553579] Using IPI No-Shortcut mode
  259. [   46.553632] registered taskstats version 1
  260. [   46.553764]   Magic number: 2:848:245
  261. [   46.553789]   hash matches device ttyw1
  262. [   46.553881] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  263. [   46.553889] EDD information not available.
  264. [   46.554172] Freeing unused kernel memory: 368k freed
  265. [   46.554219] Write protecting the kernel read-only data: 803k
  266. [   46.663466] vesafb: framebuffer at 0x10028000, mapped to 0xd0880000, using 7200k, total 7232k
  267. [   46.663487] vesafb: mode is 1280x720x32, linelength=5120, pages=1800
  268. [   46.663495] vesafb: scrolling: redraw
  269. [   46.663502] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  270. [   46.663681] Console: switching to colour frame buffer device 160x45
  271. [   46.748127] fb0: VESA VGA frame buffer device
  272. [   46.973661] fuse init (API version 7.9)
  273. [   46.995689] ACPI: processor limited to max C-state 2
  274. [   46.996645] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
  275. [   46.997502] ACPI: Processor [CPU0] (supports 8 throttling states)
  276. [   46.998391] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
  277. [   47.811937] usbcore: registered new interface driver usbfs
  278. [   47.812724] usbcore: registered new interface driver hub
  279. [   47.825182] usbcore: registered new device driver usb
  280. [   47.839854] USB Universal Host Controller Interface driver v3.0
  281. [   47.843011] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
  282. [   47.844071] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  283. [   47.844078] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  284. [   47.870469] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
  285. [   47.896177] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002020
  286. [   47.950879] usb usb1: configuration #1 chosen from 1 choice
  287. [   47.976472] hub 1-0:1.0: USB hub found
  288. [   48.028472] hub 1-0:1.0: 2 ports detected
  289. [   48.055665] 8139too Fast Ethernet driver 0.9.28
  290. [   48.132192] SCSI subsystem initialized
  291. [   48.158072] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
  292. [   48.184888] PCI: Setting latency timer of device 0000:00:1d.7 to 64
  293. [   48.184894] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  294. [   48.211810] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  295. [   48.243005] ehci_hcd 0000:00:1d.7: debug port 1
  296. [   48.270052] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  297. [   48.270062] ehci_hcd 0000:00:1d.7: irq 18, io mem 0x22605000
  298. [   48.314590] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  299. [   48.342401] usb usb2: configuration #1 chosen from 1 choice
  300. [   48.375377] hub 2-0:1.0: USB hub found
  301. [   48.406569] hub 2-0:1.0: 8 ports detected
  302. [   48.463264] libata version 3.00 loaded.
  303. [   48.535469] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 19
  304. [   48.564587] eth0: RealTek RTL8139 at 0x1000, 00:17:f2:f7:b3:d9, IRQ 19
  305. [   48.592303] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
  306. [   48.615180] ata_piix 0000:00:1f.1: version 2.12
  307. [   48.615209] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
  308. [   48.645442] PCI: Setting latency timer of device 0000:00:1f.1 to 64
  309. [   48.655111] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  310. [   48.683329] scsi0 : ata_piix
  311. [   48.715042] scsi1 : ata_piix
  312. [   48.742340] ata1: PATA max UDMA/100 cmd 0x2058 ctl 0x2064 bmdma 0x2040 irq 20
  313. [   48.769633] ata2: PATA max UDMA/100 cmd 0x2050 ctl 0x2060 bmdma 0x2048 irq 20
  314. [   48.906919] usb 2-1: new high speed USB device using ehci_hcd and address 2
  315. [   49.063568] usb 2-1: configuration #1 chosen from 1 choice
  316. [   49.314905] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
  317. [   49.341956] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  318. [   49.380623] usbcore: registered new interface driver libusual
  319. [   49.408853] ata1.00: configured for UDMA/100
  320. [   49.444060] Initializing USB Mass Storage driver...
  321. [   49.601642] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0001 PQ: 0 ANSI: 5
  322. [   49.645077] Driver 'sd' needs updating - please use bus_type methods
  323. [   49.672139] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  324. [   49.699561] usb 1-2: new low speed USB device using uhci_hcd and address 2
  325. [   49.727760] sd 0:0:0:0: [sda] Write Protect is off
  326. [   49.755625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  327. [   49.756531] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  328. [   49.785871] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
  329. [   49.815465] sd 0:0:0:0: [sda] Write Protect is off
  330. [   49.843909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  331. [   49.844181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  332. [   49.873781]  sda:<6>usb 1-2: configuration #1 chosen from 1 choice
  333. [   50.013858] scsi2 : SCSI emulation for USB Mass Storage devices
  334. [   50.049854] usbcore: registered new interface driver usb-storage
  335. [   50.079591] USB Mass Storage support registered.
  336. [   50.109082] usb-storage: device found at 2
  337. [   50.109086] usb-storage: waiting for device to settle before scanning
  338. [   50.129848] usbcore: registered new interface driver hiddev
  339. [   50.215755] input: Apple Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
  340. [   50.246524] input,hidraw0: USB HID v1.11 Device [Apple Inc. IR Receiver] on usb-0000:00:1d.0-2
  341. [   50.277786] usbcore: registered new interface driver usbhid
  342. [   50.309974] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  343. [   50.375916]  sda1 sda2 sda3 sda4 sda5 sda6
  344. [   50.408461] sd 0:0:0:0: [sda] Attached SCSI disk
  345. [   50.450756] sd 0:0:0:0: Attached scsi generic sg0 type 0
  346. [   51.093762] Attempting manual resume
  347. [   51.126726] swsusp: Resume From Partition 8:6
  348. [   51.126729] PM: Checking swsusp image.
  349. [   51.127124] PM: Resume from disk failed.
  350. [   51.267993] kjournald starting.  Commit interval 5 seconds
  351. [   51.301232] EXT3-fs: mounted filesystem with ordered data mode.
  352. [   56.000425] usb-storage: device scan complete
  353. [   56.001525] scsi 2:0:0:0: Direct-Access     Generic  USB Disk         0.00 PQ: 0 ANSI: 2
  354. [   56.065182] sd 2:0:0:0: [sdb] 8192000 512-byte hardware sectors (4194 MB)
  355. [   56.097654] sd 2:0:0:0: [sdb] Write Protect is off
  356. [   56.129263] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
  357. [   56.129267] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  358. [   56.162217] sd 2:0:0:0: [sdb] 8192000 512-byte hardware sectors (4194 MB)
  359. [   56.193941] sd 2:0:0:0: [sdb] Write Protect is off
  360. [   56.224508] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
  361. [   56.224512] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  362. [   56.254897]  sdb: sdb1 sdb2 sdb3
  363. [   56.434993] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  364. [   56.465146] sd 2:0:0:0: Attached scsi generic sg1 type 0
  365. [   57.132703] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  366. [   57.227658] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  367. [   57.344273] input: PC Speaker as /devices/platform/pcspkr/input/input2
  368. [   57.427090] iTCO_vendor_support: vendor-support=0
  369. [   57.491027] Linux agpgart interface v0.102
  370. [   57.608626] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
  371. [   57.637671] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
  372. [   57.667182] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  373. [   58.085811] intel_rng: FWH not detected
  374. [   58.125889] input: Power Button (FF) as /devices/virtual/input/input3
  375. [   58.170479] ACPI: Power Button (FF) [PWRF]
  376. [   58.197944] input: Power Button (CM) as /devices/virtual/input/input4
  377. [   58.250376] ACPI: Power Button (CM) [PWRB]
  378. [   58.749967] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
  379. [   58.777563] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
  380. [   58.805531] PCI: Setting latency timer of device 0000:00:1b.0 to 64
  381. [   59.553650] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
  382. [   59.617133] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  383. [   59.789751] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  384. [   60.554142] Loading crystalhd 0.9.27
  385. [   61.019366] nvidia: module license 'NVIDIA' taints kernel.
  386. [   61.436144] PCI_INFO: Vendor:0x14e4 Device:0x1612 s_vendor:0x14e4 s_device: 0x2612
  387. [   61.464748] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
  388. [   61.493232] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  389. [   61.522436] allocated 18 elem
  390. [   61.550796] Starting BCM70012 Device
  391. [   61.648670] NET: Registered protocol family 17
  392. [   61.815321] clock is moving to 175 with n 35 with vco_mg 2
  393. [   61.844379] CStopping BCM70012 Device
  394. [   62.094833] PCI: Setting latency timer of device 0000:02:00.0 to 64
  395. [   62.095021] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  396. [   62.125447] PCI: Setting latency timer of device 0000:01:00.0 to 64
  397. [   62.125910] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
  398. [   63.175860] loop: module loaded
  399. [   63.333949] lp: driver loaded but no devices found
  400. [   63.928368] Adding 524280k swap on /dev/sda6.  Priority:-1 extents:1 across:524280k
  401. [   64.522694] EXT3 FS on sda5, internal journal
  402. [   65.499850] NET: Registered protocol family 10
  403. [   65.500162] lo: Disabled Privacy Extensions
  404. [   66.975439] ip_tables: (C) 2000-2006 Netfilter Core Team
  405. [   68.294389] No dock devices found.
  406. [   77.504714] eth0: no IPv6 routers present
  407. [   85.919751] Opening new user[0] handle
  408. [   85.919759] Starting BCM70012 Device
  409. [   86.156903] clock is moving to 175 with n 35 with vco_mg 2
  410. [   86.156927] CInitializing Dio pool 10 1024 505c cdfe5b40
  411. [   88.154976] Firmware Downloaded Successfully
  412. drpepper@xbmc:~/temp/crystalhd/driver/linux$
create new paste | create new version of this paste RAW Paste Data