Pc: Dell Inspiron 530 Ifconfig: enp0s25 Link encap:Ethernet IndirizzoHW 00:1e:c9:6e:6c:6a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:1000 Byte RX:0 (0.0 B) Byte TX:0 (0.0 B) Interrupt:20 Memoria:fdfc0000-fdfe0000 lo Link encap:Loopback locale indirizzo inet:127.0.0.1 Maschera:255.0.0.0 indirizzo inet6: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:532 errors:0 dropped:0 overruns:0 frame:0 TX packets:532 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:1 Byte RX:42664 (42.6 KB) Byte TX:42664 (42.6 KB) Dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-22-generic (buildd@lgw01-41) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 (Ubuntu 4.4.0-22.40-generic 4.4.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=1d37b7ff-c8b1-4209-af19-0ba8463aae27 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf58ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf590000-0x00000000cf5e2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf5e3000-0x00000000cf5effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cf5f0000-0x00000000cf5fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Dell Inc. Inspiron 530/0K216C, BIOS 1.0.18 02/24/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CAFFF write-protect [ 0.000000] CB000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 100000000 mask FE0000000 write-back [ 0.000000] 1 base 120000000 mask FF0000000 write-back [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 0C0000000 mask FF0000000 write-back [ 0.000000] 5 base 0CF700000 mask FFFF00000 uncachable [ 0.000000] 6 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 7 base 0CF600000 mask FFFF00000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 4GB, range: 512MB, type WB [ 0.000000] reg 1, base: 4608MB, range: 256MB, type WB [ 0.000000] reg 2, base: 0GB, range: 2GB, type WB [ 0.000000] reg 3, base: 2GB, range: 1GB, type WB [ 0.000000] reg 4, base: 3GB, range: 256MB, type WB [ 0.000000] reg 5, base: 3319MB, range: 1MB, type UC [ 0.000000] reg 6, base: 3320MB, range: 8MB, type UC [ 0.000000] reg 7, base: 3318MB, range: 1MB, type UC [ 0.000000] total RAM covered: 4086M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3318MB, range: 2MB, type UC [ 0.000000] reg 4, base: 3320MB, range: 8MB, type UC [ 0.000000] reg 5, base: 4GB, range: 512MB, type WB [ 0.000000] reg 6, base: 4608MB, range: 256MB, type WB [ 0.000000] e820: update [mem 0xcf600000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcf590 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f3f00-0x000f3f0f] mapped at [ffff8800000f3f00] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE [ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE [ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33b6a000-0x35dacfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F97A0 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000CF5E3080 00005C (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x00000000CF5E7200 0000F4 (v03 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150930/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20150930/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150930/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20150930/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150930/tbfadt-704) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150930/tbfadt-704) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20150930/tbfadt-704) [ 0.000000] ACPI: DSDT 0x00000000CF5E3200 003FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000CF590000 000040 [ 0.000000] ACPI: FACS 0x00000000CF590000 000040 [ 0.000000] ACPI: HPET 0x00000000CF5E73C0 000038 (v01 DELL FX09 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0x00000000CF5E7400 00003C (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: SLIC 0x00000000CF5E7440 000176 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: DMY2 0x00000000CF5E75C0 000080 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0x00000000CF5E7300 000084 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 0x00000000CF5E7CA0 000380 (v01 PmRef CpuPm 00003000 INTL 20041203) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x12fff7000-0x12fffbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf58ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff] [ 0.000000] On node 0 totalpages: 1045805 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13207 pages used for memmap [ 0.000000] DMA32 zone: 845200 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xcf800000-0xcfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf590000-0xcf5e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf5e3000-0xcf5effff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf5f0000-0xcf5fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf600000-0xcf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fc00000 s98008 r8192 d28968 u524288 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029441 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=1d37b7ff-c8b1-4209-af19-0ba8463aae27 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3997200K/4183220K available (8359K kernel code, 1278K rwdata, 3920K rodata, 1480K init, 1292K bss, 186020K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:456 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3325.141 MHz processor [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 6650.28 BogoMIPS (lpj=13300564) [ 0.004014] pid_max: default: 32768 minimum: 301 [ 0.004021] ACPI: Core revision 20150930 [ 0.009626] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.009647] Security Framework initialized [ 0.009649] Yama: becoming mindful. [ 0.009669] AppArmor: AppArmor initialized [ 0.009923] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011732] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012566] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.012571] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.012843] Initializing cgroup subsys io [ 0.012847] Initializing cgroup subsys memory [ 0.012856] Initializing cgroup subsys devices [ 0.012859] Initializing cgroup subsys freezer [ 0.012862] Initializing cgroup subsys net_cls [ 0.012865] Initializing cgroup subsys perf_event [ 0.012868] Initializing cgroup subsys net_prio [ 0.012870] Initializing cgroup subsys hugetlb [ 0.012874] Initializing cgroup subsys pids [ 0.012895] CPU: Physical Processor ID: 0 [ 0.012896] CPU: Processor Core ID: 0 [ 0.012898] mce: CPU supports 6 MCE banks [ 0.012905] CPU0: Thermal monitoring enabled (TM2) [ 0.012908] process: using mwait in idle threads [ 0.012913] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.012914] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.013203] Freeing SMP alternatives memory: 28K (ffffffff820b3000 - ffffffff820ba000) [ 0.016004] ftrace: allocating 31906 entries in 125 pages [ 0.024084] smpboot: Max logical packages: 2 [ 0.024087] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.024439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.068000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.068000] ... version: 2 [ 0.068000] ... bit width: 40 [ 0.068000] ... generic registers: 2 [ 0.068000] ... value mask: 000000ffffffffff [ 0.068000] ... max period: 000000007fffffff [ 0.068000] ... fixed-purpose events: 3 [ 0.068000] ... event mask: 0000000700000003 [ 0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.068000] x86: Booting SMP configuration: [ 0.068000] .... node #0, CPUs: #1 [ 0.068000] x86: Booted up 1 node, 2 CPUs [ 0.068000] smpboot: Total of 2 processors activated (13300.56 BogoMIPS) [ 0.068101] devtmpfs: initialized [ 0.068978] evm: security.selinux [ 0.068980] evm: security.SMACK64 [ 0.068980] evm: security.SMACK64EXEC [ 0.068981] evm: security.SMACK64TRANSMUTE [ 0.068982] evm: security.SMACK64MMAP [ 0.068983] evm: security.ima [ 0.068984] evm: security.capability [ 0.072008] PM: Registering ACPI NVS region [mem 0xcf590000-0xcf5e2fff] (339968 bytes) [ 0.072008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.072025] pinctrl core: initialized pinctrl subsystem [ 0.072133] RTC time: 15:02:21, date: 05/29/16 [ 0.072229] NET: Registered protocol family 16 [ 0.080005] cpuidle: using governor ladder [ 0.092003] cpuidle: using governor menu [ 0.092007] PCCT header not found. [ 0.092079] ACPI: bus type PCI registered [ 0.092082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.092173] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.092177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.092196] PCI: Using configuration type 1 for base access [ 0.108066] ACPI: Added _OSI(Module Device) [ 0.108067] ACPI: Added _OSI(Processor Device) [ 0.108069] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.108070] ACPI: Added _OSI(Processor Aggregator Device) [ 0.110586] ACPI: Dynamic OEM Table Load: [ 0.110591] ACPI: SSDT 0xFFFF88012A53E000 00026C (v01 PmRef Cpu0Ist 00003000 INTL 20041203) [ 0.110794] ACPI: Dynamic OEM Table Load: [ 0.110797] ACPI: SSDT 0xFFFF88012A567A00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) [ 0.111009] ACPI: Interpreter enabled [ 0.111013] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.111016] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.111026] ACPI: (supports S0 S3 S4 S5) [ 0.111028] ACPI: Using IOAPIC for interrupt routing [ 0.111045] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.114258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.114263] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.114266] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.114439] PCI host bridge to bus 0000:00 [ 0.114442] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.114443] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.114445] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.114446] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.114448] pci_bus 0000:00: root bus resource [mem 0xcf600000-0xfebfffff window] [ 0.114450] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.114456] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.114537] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.114566] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.114626] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000 [ 0.114636] pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff] [ 0.114639] pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07] [ 0.114643] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [ 0.114647] pci 0000:00:02.0: reg 0x1c: [mem 0xfdb00000-0xfdbfffff] [ 0.114738] pci 0000:00:19.0: [8086:10c0] type 00 class 0x020000 [ 0.114758] pci 0000:00:19.0: reg 0x10: [mem 0xfdfc0000-0xfdfdffff] [ 0.114765] pci 0000:00:19.0: reg 0x14: [mem 0xfdfff000-0xfdffffff] [ 0.114771] pci 0000:00:19.0: reg 0x18: [io 0xfe00-0xfe1f] [ 0.114810] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.114845] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.114880] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.114918] pci 0000:00:1a.0: reg 0x20: [io 0xfd00-0xfd1f] [ 0.114974] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.115011] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.115048] pci 0000:00:1a.1: reg 0x20: [io 0xfc00-0xfc1f] [ 0.115104] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.115140] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.115177] pci 0000:00:1a.2: reg 0x20: [io 0xfb00-0xfb1f] [ 0.115234] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.115276] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.115299] pci 0000:00:1a.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff] [ 0.115359] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.115396] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.115436] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.115456] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit] [ 0.115504] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.115542] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.115578] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.115615] pci 0000:00:1d.0: reg 0x20: [io 0xfa00-0xfa1f] [ 0.115671] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.115707] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.115745] pci 0000:00:1d.1: reg 0x20: [io 0xf900-0xf91f] [ 0.115800] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.115836] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.115873] pci 0000:00:1d.2: reg 0x20: [io 0xf800-0xf81f] [ 0.115930] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.115972] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.115995] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffd000-0xfdffd3ff] [ 0.116057] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.116093] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.116129] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.116196] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.116233] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.116305] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.116309] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.116311] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) [ 0.116314] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f) [ 0.116394] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f [ 0.116410] pci 0000:00:1f.2: reg 0x10: [io 0xf700-0xf707] [ 0.116416] pci 0000:00:1f.2: reg 0x14: [io 0xf600-0xf603] [ 0.116423] pci 0000:00:1f.2: reg 0x18: [io 0xf500-0xf507] [ 0.116429] pci 0000:00:1f.2: reg 0x1c: [io 0xf400-0xf403] [ 0.116435] pci 0000:00:1f.2: reg 0x20: [io 0xf300-0xf30f] [ 0.116441] pci 0000:00:1f.2: reg 0x24: [io 0xf200-0xf20f] [ 0.116519] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.116532] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit] [ 0.116548] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.116623] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [ 0.116639] pci 0000:00:1f.5: reg 0x10: [io 0xf000-0xf007] [ 0.116645] pci 0000:00:1f.5: reg 0x14: [io 0xef00-0xef03] [ 0.116651] pci 0000:00:1f.5: reg 0x18: [io 0xee00-0xee07] [ 0.116657] pci 0000:00:1f.5: reg 0x1c: [io 0xed00-0xed03] [ 0.116663] pci 0000:00:1f.5: reg 0x20: [io 0xec00-0xec0f] [ 0.116669] pci 0000:00:1f.5: reg 0x24: [io 0xeb00-0xeb0f] [ 0.116768] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.116770] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.116773] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.116776] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.116835] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.116838] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.116841] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.116845] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.116847] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.116848] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.116850] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.116852] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.116853] pci 0000:00:1e.0: bridge window [mem 0xcf600000-0xfebfffff window] (subtractive decode) [ 0.117213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.117257] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.117302] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.117345] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.117388] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.117431] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.117474] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.117517] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) [ 0.117587] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.117658] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.117658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.117658] vgaarb: loaded [ 0.117658] vgaarb: bridge control possible 0000:00:02.0 [ 0.117658] SCSI subsystem initialized [ 0.117658] libata version 3.00 loaded. [ 0.117658] ACPI: bus type USB registered [ 0.117658] usbcore: registered new interface driver usbfs [ 0.117658] usbcore: registered new interface driver hub [ 0.117658] usbcore: registered new device driver usb [ 0.117658] PCI: Using ACPI for IRQ routing [ 0.122705] PCI: pci_cache_line_size set to 64 bytes [ 0.122738] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.122739] e820: reserve RAM buffer [mem 0xcf590000-0xcfffffff] [ 0.122839] NetLabel: Initializing [ 0.122840] NetLabel: domain hash size = 128 [ 0.122841] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.122852] NetLabel: unlabeled traffic allowed by default [ 0.122869] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.122869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.122869] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.124013] clocksource: Switched to clocksource hpet [ 0.130853] AppArmor: AppArmor Filesystem Enabled [ 0.130928] pnp: PnP ACPI init [ 0.131076] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.131078] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.131080] system 00:00: [io 0x0290-0x0297] has been reserved [ 0.131082] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.131086] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131147] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.131276] system 00:02: [io 0x0400-0x04bf] could not be reserved [ 0.131279] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131434] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved [ 0.131437] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131514] system 00:04: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.131517] system 00:04: [mem 0xcf600000-0xcf6fffff] has been reserved [ 0.131521] system 00:04: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.131522] system 00:04: [mem 0xcf590000-0xcf5fffff] could not be reserved [ 0.131524] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.131526] system 00:04: [mem 0x00100000-0xcf58ffff] could not be reserved [ 0.131528] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.131530] system 00:04: [mem 0xfed14000-0xfed1dfff] has been reserved [ 0.131531] system 00:04: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.131533] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.131535] system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.131536] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved [ 0.131538] system 00:04: [mem 0x000e0000-0x000effff] has been reserved [ 0.131541] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.131546] pnp: PnP ACPI: found 5 devices [ 0.137843] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.137861] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.137864] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.137867] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.137869] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.137873] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.137875] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.137878] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.137881] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.137886] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.137888] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.137889] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.137891] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.137892] pci_bus 0000:00: resource 8 [mem 0xcf600000-0xfebfffff window] [ 0.137894] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.137895] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.137897] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.137899] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.137900] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.137902] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.137903] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] [ 0.137905] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] [ 0.137906] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.137908] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.137909] pci_bus 0000:02: resource 8 [mem 0xcf600000-0xfebfffff window] [ 0.137937] NET: Registered protocol family 2 [ 0.138115] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.138246] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.138454] TCP: Hash tables configured (established 32768 bind 32768) [ 0.138497] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.138527] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.138590] NET: Registered protocol family 1 [ 0.138604] pci 0000:00:02.0: Video device with shadowed ROM [ 0.139373] PCI: CLS 64 bytes, default 64 [ 0.139417] Trying to unpack rootfs image as initramfs... [ 0.598439] Freeing initrd memory: 35084K (ffff880033b6a000 - ffff880035dad000) [ 0.598531] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.598534] software IO TLB [mem 0xcb590000-0xcf590000] (64MB) mapped at [ffff8800cb590000-ffff8800cf58ffff] [ 0.598705] Scanning for low memory corruption every 60 seconds [ 0.599051] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.599098] audit: initializing netlink subsys (disabled) [ 0.599124] audit: type=2000 audit(1464534141.596:1): initialized [ 0.599403] Initialise system trusted keyring [ 0.599526] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.601173] zbud: loaded [ 0.601340] VFS: Disk quotas dquot_6.6.0 [ 0.601376] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.601867] fuse init (API version 7.23) [ 0.601998] Key type big_key registered [ 0.602012] Allocating IMA MOK and blacklist keyrings. [ 0.602330] Key type asymmetric registered [ 0.602333] Asymmetric key parser 'x509' registered [ 0.602369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.602395] io scheduler noop registered [ 0.602397] io scheduler deadline registered (default) [ 0.602428] io scheduler cfq registered [ 0.602659] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.602667] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.602693] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.602694] vesafb: scrolling: redraw [ 0.602696] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.602707] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 5120k, total 5120k [ 0.602805] Console: switching to colour frame buffer device 160x64 [ 0.602829] fb0: VESA VGA frame buffer device [ 0.602844] intel_idle: does not run on family 6 model 23 [ 0.602913] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.602917] ACPI: Power Button [PWRB] [ 0.602960] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.602961] ACPI: Power Button [PWRF] [ 0.603356] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.603357] ACPI: Thermal Zone [THRM] (40 C) [ 0.603391] GHES: HEST is not enabled! [ 0.603466] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.604819] Linux agpgart interface v0.103 [ 0.604868] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 0.604882] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.606045] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.606163] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.608612] brd: module loaded [ 0.609571] loop: module loaded [ 0.609700] ata_piix 0000:00:1f.2: version 2.13 [ 0.609786] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.610320] scsi host0: ata_piix [ 0.610399] scsi host1: ata_piix [ 0.610439] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19 [ 0.610442] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19 [ 0.610496] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.610820] scsi host2: ata_piix [ 0.610887] scsi host3: ata_piix [ 0.610927] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19 [ 0.610929] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19 [ 0.611021] libphy: Fixed MDIO Bus: probed [ 0.611024] tun: Universal TUN/TAP device driver, 1.6 [ 0.611025] tun: (C) 1999-2004 Max Krasnyansky [ 0.611060] PPP generic driver version 2.4.2 [ 0.611115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.611120] ehci-pci: EHCI PCI platform driver [ 0.611199] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.611206] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.611216] ehci-pci 0000:00:1a.7: debug port 1 [ 0.615114] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.615123] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdffe000 [ 0.624017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.624079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.624082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.624085] usb usb1: Product: EHCI Host Controller [ 0.624088] usb usb1: Manufacturer: Linux 4.4.0-22-generic ehci_hcd [ 0.624090] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.624233] hub 1-0:1.0: USB hub found [ 0.624238] hub 1-0:1.0: 6 ports detected [ 0.624421] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.624426] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.624436] ehci-pci 0000:00:1d.7: debug port 1 [ 0.628327] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.628335] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffd000 [ 0.640016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.640055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.640058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.640061] usb usb2: Product: EHCI Host Controller [ 0.640063] usb usb2: Manufacturer: Linux 4.4.0-22-generic ehci_hcd [ 0.640066] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.640201] hub 2-0:1.0: USB hub found [ 0.640215] hub 2-0:1.0: 6 ports detected [ 0.640338] ehci-platform: EHCI generic platform driver [ 0.640349] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.640352] ohci-pci: OHCI PCI platform driver [ 0.640362] ohci-platform: OHCI generic platform driver [ 0.640369] uhci_hcd: USB Universal Host Controller Interface driver [ 0.640428] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.640433] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.640438] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.640458] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00 [ 0.640492] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.640494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.640495] usb usb3: Product: UHCI Host Controller [ 0.640497] usb usb3: Manufacturer: Linux 4.4.0-22-generic uhci_hcd [ 0.640498] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.640580] hub 3-0:1.0: USB hub found [ 0.640587] hub 3-0:1.0: 2 ports detected [ 0.640713] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.640718] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.640723] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.640743] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00 [ 0.640775] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.640777] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.640778] usb usb4: Product: UHCI Host Controller [ 0.640780] usb usb4: Manufacturer: Linux 4.4.0-22-generic uhci_hcd [ 0.640781] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.640863] hub 4-0:1.0: USB hub found [ 0.640868] hub 4-0:1.0: 2 ports detected [ 0.640987] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.640992] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.640997] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.641012] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00 [ 0.641045] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.641047] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.641048] usb usb5: Product: UHCI Host Controller [ 0.641050] usb usb5: Manufacturer: Linux 4.4.0-22-generic uhci_hcd [ 0.641051] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.641132] hub 5-0:1.0: USB hub found [ 0.641137] hub 5-0:1.0: 2 ports detected [ 0.641258] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.641263] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.641268] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.641283] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00 [ 0.641315] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.641316] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.641318] usb usb6: Product: UHCI Host Controller [ 0.641319] usb usb6: Manufacturer: Linux 4.4.0-22-generic uhci_hcd [ 0.641321] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.641401] hub 6-0:1.0: USB hub found [ 0.641407] hub 6-0:1.0: 2 ports detected [ 0.641524] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.641530] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.641535] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.641550] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900 [ 0.641581] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.641583] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.641585] usb usb7: Product: UHCI Host Controller [ 0.641586] usb usb7: Manufacturer: Linux 4.4.0-22-generic uhci_hcd [ 0.641588] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.641666] hub 7-0:1.0: USB hub found [ 0.641671] hub 7-0:1.0: 2 ports detected [ 0.641791] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.641797] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.641802] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.641816] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800 [ 0.641852] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.641854] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.641856] usb usb8: Product: UHCI Host Controller [ 0.641857] usb usb8: Manufacturer: Linux 4.4.0-22-generic uhci_hcd [ 0.641858] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.641938] hub 8-0:1.0: USB hub found [ 0.641943] hub 8-0:1.0: 2 ports detected [ 0.642053] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.642373] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.642376] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.642488] mousedev: PS/2 mouse device common for all mice [ 0.642602] rtc_cmos 00:01: RTC can wake from S4 [ 0.642701] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.642720] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.642726] i2c /dev entries driver [ 0.642773] device-mapper: uevent: version 1.0.3 [ 0.642830] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.642843] ledtrig-cpu: registered to indicate activity on CPUs [ 0.643120] NET: Registered protocol family 10 [ 0.643268] NET: Registered protocol family 17 [ 0.643278] Key type dns_resolver registered [ 0.643415] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07 [ 0.643421] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07 [ 0.643448] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.643575] registered taskstats version 1 [ 0.643589] Loading compiled-in X.509 certificates [ 0.644406] Loaded X.509 cert 'Build time autogenerated kernel key: 10281ca0c0463cd0680138fff55319c9bd7d63b8' [ 0.644422] zswap: loaded using pool lzo/zbud [ 0.645913] Key type trusted registered [ 0.648301] Key type encrypted registered [ 0.648305] AppArmor: AppArmor sha1 policy hashing enabled [ 0.648308] ima: No TPM chip found, activating TPM-bypass! [ 0.648324] evm: HMAC attrs: 0x1 [ 0.648494] Magic number: 0:725:33 [ 0.648579] rtc_cmos 00:01: setting system clock to 2016-05-29 15:02:22 UTC (1464534142) [ 0.648922] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.648923] EDD information not available. [ 0.648972] PM: Hibernation image not present or could not be loaded. [ 0.952013] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.080014] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 1.084046] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.084185] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.085377] usb 2-1: New USB device found, idVendor=0781, idProduct=5583 [ 1.085380] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.085383] usb 2-1: Product: Ultra Fit [ 1.085385] usb 2-1: Manufacturer: SanDisk [ 1.085387] usb 2-1: SerialNumber: 4C530146010417117234 [ 1.092342] ata4.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133 [ 1.092346] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.100301] ata4.00: configured for UDMA/133 [ 1.110921] ata3.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133 [ 1.110924] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.120011] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 1.142977] ata3.00: configured for UDMA/133 [ 1.196012] usb 2-5: new high-speed USB device number 3 using ehci-pci [ 1.255030] usb 4-1: New USB device found, idVendor=413c, idProduct=3012 [ 1.255034] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.255037] usb 4-1: Product: Dell USB Optical Mouse [ 1.255039] usb 4-1: Manufacturer: Dell [ 1.386377] usb 2-5: New USB device found, idVendor=0644, idProduct=0200 [ 1.386380] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.386383] usb 2-5: Product: CA-200 [ 1.386385] usb 2-5: Manufacturer: TEAC [ 1.386388] usb 2-5: SerialNumber: 000002124DD3 [ 1.404059] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.404071] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.404080] ata2.01: link offline, clearing class 3 to NONE [ 1.404216] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.404225] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.412219] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100 [ 1.428219] ata2.00: configured for UDMA/100 [ 1.428444] ata1.00: ATA-8: Hitachi HDT721075SLA380, ST4OA31B, max UDMA/133 [ 1.428447] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.444290] ata1.00: configured for UDMA/133 [ 1.444421] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72107 A31B PQ: 0 ANSI: 5 [ 1.444618] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.444666] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.444669] sd 0:0:0:0: [sda] Write Protect is off [ 1.444671] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.444685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.446246] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5 [ 1.454298] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.454300] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.454435] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.454506] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.454596] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 1.454709] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.454745] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.454768] sd 2:0:0:0: [sdb] Write Protect is off [ 1.454770] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.454804] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.454825] scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5 [ 1.455009] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.455012] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.455014] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 1.455056] sd 3:0:0:0: [sdc] Write Protect is off [ 1.455058] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.455079] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.457424] sdb: sdb1 sdb2 [ 1.457706] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.482811] sda: sda1 sda2 sda3 [ 1.483078] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.527402] sdc: sdc1 sdc2 sdc3 [ 1.527727] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.528934] Freeing unused kernel memory: 1480K (ffffffff81f41000 - ffffffff820b3000) [ 1.528935] Write protecting the kernel read-only data: 14336k [ 1.529540] Freeing unused kernel memory: 1868K (ffff88000182d000 - ffff880001a00000) [ 1.529929] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000) [ 1.537733] random: systemd-udevd urandom read with 25 bits of entropy available [ 1.569767] pps_core: LinuxPPS API ver. 1 registered [ 1.569770] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.570881] PTP clock support registered [ 1.574405] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.574407] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.574564] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.581846] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.581888] [drm] Initialized drm 1.1.0 20060810 [ 1.589618] hidraw: raw HID events driver (C) Jiri Kosina [ 1.598414] usb-storage 2-1:1.0: USB Mass Storage device detected [ 1.603926] tsc: Refined TSC clocksource calibration: 3324.999 MHz [ 1.603929] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fed8c1abef, max_idle_ns: 440795363067 ns [ 1.605511] usbcore: registered new interface driver usbhid [ 1.605512] usbhid: USB HID core driver [ 1.608081] scsi host4: usb-storage 2-1:1.0 [ 1.608228] usb-storage 2-5:1.0: USB Mass Storage device detected [ 1.611105] scsi host5: usb-storage 2-5:1.0 [ 1.611168] usbcore: registered new interface driver usb-storage [ 1.612367] usbcore: registered new interface driver uas [ 1.642647] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:413C:3012.0001/input/input5 [ 1.642781] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.1-1/input0 [ 1.702040] usb 5-1: New USB device found, idVendor=413c, idProduct=2003 [ 1.702044] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.702046] usb 5-1: Product: Dell USB Keyboard [ 1.702049] usb 5-1: Manufacturer: Dell [ 1.730242] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:413C:2003.0002/input/input6 [ 1.753989] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:c9:6e:6c:6a [ 1.753991] e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection [ 1.754011] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF [ 1.754748] [drm] Memory usable by graphics device = 512M [ 1.754750] checking generic (d0000000 500000) vs hw (d0000000 10000000) [ 1.754752] fb: switching to inteldrmfb from VESA VGA [ 1.754778] Console: switching to colour dummy device 80x25 [ 1.754851] [drm] Replacing VGA console driver [ 1.756493] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.784161] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.2-1/input0 [ 1.812123] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.812128] [drm] Driver supports precise vblank timestamp query. [ 1.812556] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.822340] [drm] initialized overlay support [ 1.822404] [drm:intel_opregion_init [i915]] *ERROR* No ACPI video bus found [ 1.822439] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 1.914534] fbcon: inteldrmfb (fb0) is primary device [ 1.914610] Console: switching to colour frame buffer device 210x65 [ 1.914644] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.600071] clocksource: Switched to clocksource tsc [ 2.609016] scsi 4:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 2.609376] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 2.610384] sd 4:0:0:0: [sdd] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 2.612130] sd 4:0:0:0: [sdd] Write Protect is off [ 2.612134] sd 4:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 2.613131] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.618385] scsi 5:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0 [ 2.620029] sdd: sdd1 [ 2.622139] scsi 5:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0 [ 2.625759] scsi 5:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0 [ 2.627131] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 2.628884] scsi 5:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0 [ 2.629331] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 2.630135] sd 5:0:0:1: Attached scsi generic sg6 type 0 [ 2.630770] sd 5:0:0:2: Attached scsi generic sg7 type 0 [ 2.631347] sd 5:0:0:3: Attached scsi generic sg8 type 0 [ 2.655632] sd 5:0:0:1: [sdf] Attached SCSI removable disk [ 2.825254] random: nonblocking pool is initialized [ 2.869758] sd 5:0:0:2: [sdg] Attached SCSI removable disk [ 2.874006] sd 5:0:0:3: [sdh] Attached SCSI removable disk [ 2.878381] sd 5:0:0:0: [sde] Attached SCSI removable disk [ 4.636022] floppy0: no floppy controllers found [ 9.752153] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 10.213976] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 10.214069] systemd[1]: Detected architecture x86-64. [ 10.215015] systemd[1]: Set hostname to . [ 10.620389] systemd[1]: Created slice User and Session Slice. [ 10.620439] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.620494] systemd[1]: Listening on Journal Audit Socket. [ 10.620519] systemd[1]: Listening on Syslog Socket. [ 10.620548] systemd[1]: Listening on Journal Socket. [ 10.620578] systemd[1]: Listening on udev Control Socket. [ 10.620599] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.620608] systemd[1]: Reached target Encrypted Volumes. [ 10.620635] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 10.620643] systemd[1]: Reached target Swap. [ 10.620696] systemd[1]: Created slice System Slice. [ 10.632133] systemd[1]: Starting Journal Service... [ 10.637356] systemd[1]: Starting Load Kernel Modules... [ 10.637710] systemd[1]: Mounting Debug File System... [ 10.638112] systemd[1]: Mounting POSIX Message Queue File System... [ 10.638485] systemd[1]: Started Read required files in advance. [ 10.638916] systemd[1]: Reached target Slices. [ 10.639252] systemd[1]: Started Braille Device Support. [ 10.639336] systemd[1]: Listening on udev Kernel Socket. [ 10.639725] systemd[1]: Mounting Huge Pages File System... [ 10.639806] systemd[1]: Created slice system-getty.slice. [ 10.640231] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 10.640608] systemd[1]: Starting Nameserver information manager... [ 10.640761] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.665235] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.676146] systemd[1]: Starting Uncomplicated firewall... [ 10.676177] systemd[1]: Reached target User and Group Name Lookups. [ 10.676225] systemd[1]: Reached target Remote File Systems (Pre). [ 10.676245] systemd[1]: Reached target Remote File Systems. [ 10.725151] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 10.736158] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.745255] systemd[1]: Started Uncomplicated firewall. [ 10.825153] lp: driver loaded but no devices found [ 10.830821] systemd[1]: Mounted POSIX Message Queue File System. [ 10.830848] systemd[1]: Mounted Debug File System. [ 10.830863] systemd[1]: Mounted Huge Pages File System. [ 10.839574] ppdev: user-space parallel port driver [ 10.863314] systemd[1]: Started Load Kernel Modules. [ 10.863786] systemd[1]: Mounting FUSE Control File System... [ 10.864187] systemd[1]: Starting Apply Kernel Variables... [ 10.869460] systemd[1]: Mounted FUSE Control File System. [ 10.886634] systemd[1]: Started Nameserver information manager. [ 10.897666] systemd[1]: Started Journal Service. [ 11.403388] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro,discard [ 11.536225] systemd-journald[229]: Received request to flush runtime journal from PID 1 [ 11.803728] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.851989] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20150930/utaddress-254) [ 11.851995] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.851998] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20150930/utaddress-254) [ 11.852011] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.852079] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO_) (20150930/utaddress-254) [ 11.852083] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.852084] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.093442] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 12.093446] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.093448] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.093450] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 12.093451] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 12.093453] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 12.093455] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 12.093457] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 12.106997] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 12.107059] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.107114] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.107167] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.107221] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.107275] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.107328] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.107380] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 12.419395] audit: type=1400 audit(1464534154.263:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=547 comm="apparmor_parser" [ 12.419404] audit: type=1400 audit(1464534154.263:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser" [ 12.419409] audit: type=1400 audit(1464534154.263:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=547 comm="apparmor_parser" [ 12.419413] audit: type=1400 audit(1464534154.263:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser" [ 12.426571] audit: type=1400 audit(1464534154.271:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=562 comm="apparmor_parser" [ 12.487807] audit: type=1400 audit(1464534154.335:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=573 comm="apparmor_parser" [ 12.491282] audit: type=1400 audit(1464534154.335:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=546 comm="apparmor_parser" [ 12.491288] audit: type=1400 audit(1464534154.335:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=546 comm="apparmor_parser" [ 12.535805] audit: type=1400 audit(1464534154.379:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=580 comm="apparmor_parser" [ 12.545261] audit: type=1400 audit(1464534154.391:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=579 comm="apparmor_parser" [ 12.648029] dell_smm_hwmon: unable to get SMM Dell signature [ 12.705250] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 14.796031] floppy0: no floppy controllers found [ 16.059640] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 16.256143] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 22.204026] Non-volatile memory driver v1.3 [ 202.800015] usb 2-2: new high-speed USB device number 4 using ehci-pci [ 203.732120] usb 2-2: New USB device found, idVendor=090c, idProduct=1000 [ 203.732124] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 203.732127] usb 2-2: Product: USB DISK [ 203.732129] usb 2-2: Manufacturer: SMI Corporation [ 203.732132] usb 2-2: SerialNumber: AA04012800007958 [ 203.732673] usb-storage 2-2:1.0: USB Mass Storage device detected [ 203.733950] scsi host6: usb-storage 2-2:1.0 [ 204.733537] scsi 6:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 204.733807] sd 6:0:0:0: Attached scsi generic sg9 type 0 [ 204.738232] sd 6:0:0:0: [sdi] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 204.739404] sd 6:0:0:0: [sdi] Write Protect is off [ 204.739409] sd 6:0:0:0: [sdi] Mode Sense: 43 00 00 00 [ 204.740523] sd 6:0:0:0: [sdi] No Caching mode page found [ 204.740528] sd 6:0:0:0: [sdi] Assuming drive cache: write through [ 204.745656] sdi: sdi1 [ 204.748148] sd 6:0:0:0: [sdi] Attached SCSI removable disk lspci -vv: 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) Subsystem: Dell Inspiron 530 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: agpgart-intel 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Dell Inspiron 530 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending+ InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Dell Inspiron 530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0200c Data: 4182 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: i915 Kernel modules: i915 00:19.0 Ethernet controller: Intel Corporation 82562V-2 10/100 Network Connection (rev 02) Subsystem: Dell Inspiron 530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 530 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 530 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 530 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Inspiron 530 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ehci-pci 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Dell Inspiron 530 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 530 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 530 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Inspiron 530 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Inspiron 530 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) Subsystem: Dell Inspiron 530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Inspiron 530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ata_piix Kernel modules: pata_acpi 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) Subsystem: Dell Inspiron 530 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Kernel driver in use: ata_piix Kernel modules: pata_acpi