╔════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╗ ║ FormSet: 'Advanced' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╟────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╢ ║ VarStore Id: '0x1234', Size: '900', Name: 'SystemConfig' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╚════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╝ ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'Advanced' [ ID: '0x0001' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Reference: 'Boot Configuration' [ FormID: '0x0021', QuestionId: '0x01', VarStore: '0xffff' ] Reference: 'Peripheral Configuration' [ FormID: '0x0022', QuestionId: '0x02', VarStore: '0xffff' ] Reference: 'IDE Configuration' [ FormID: '0x0023', QuestionId: '0x03', VarStore: '0xffff' ] Reference: 'Thermal Configuration' [ FormID: '0x0024', QuestionId: '0x04', VarStore: '0xffff' ] Reference: 'Video Configuration' [ FormID: '0x0025', QuestionId: '0x05', VarStore: '0xffff' ] Reference: 'USB Configuration' [ FormID: '0x0026', QuestionId: '0x06', VarStore: '0xffff' ] Reference: 'Chipset Configuration' [ FormID: '0x0027', QuestionId: '0x07', VarStore: '0xffff' ] Reference: 'ACPI Table/Features Control' [ FormID: '0x0028', QuestionId: '0x08', VarStore: '0xffff' ] Reference: 'PCI Express Configuration' [ FormID: '0x0030', QuestionId: '0x09', VarStore: '0xffff' ] Reference: 'Extended ICC' [ FormID: '0x1cc0', QuestionId: '0x0a', VarStore: '0xffff' ] Reference: 'DPTF Configuration' [ FormID: '0x3610', QuestionId: '0x0b', VarStore: '0xffff' ] Reference: 'Intel(R) Smart Connect Technology Configuration' [ FormID: '0x1e00', QuestionId: '0x0c', VarStore: '0xffff' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0020' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Slot3 IRQ Priority' [ VarStore: '0x02', QuestionId: '0x2040', Help: 'Manual IRQ selection does not garantee PCI slot device will be configured with choice because PnP ISA Cards (if present) are assigned the available resources before PCI device.'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'IRQ3' [ Value: '3' Default: 'false' Type: 'int8' ] Option: 'IRQ4' [ Value: '4' Default: 'false' Type: 'int8' ] Option: 'IRQ5' [ Value: '5' Default: 'false' Type: 'int8' ] Option: 'IRQ7' [ Value: '7' Default: 'false' Type: 'int8' ] Option: 'IRQ9' [ Value: '9' Default: 'false' Type: 'int8' ] Option: 'IRQ10' [ Value: '10' Default: 'false' Type: 'int8' ] Option: 'IRQ11' [ Value: '11' Default: 'false' Type: 'int8' ] Select option: 'PCI Slot4 IRQ Priority' [ VarStore: '0x03', QuestionId: '0x2041', Help: 'Manual IRQ selection does not garantee PCI slot device will be configured with choice because PnP ISA Cards (if present) are assigned the available resources before PCI device.'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'IRQ3' [ Value: '3' Default: 'false' Type: 'int8' ] Option: 'IRQ4' [ Value: '4' Default: 'false' Type: 'int8' ] Option: 'IRQ5' [ Value: '5' Default: 'false' Type: 'int8' ] Option: 'IRQ7' [ Value: '7' Default: 'false' Type: 'int8' ] Option: 'IRQ9' [ Value: '9' Default: 'false' Type: 'int8' ] Option: 'IRQ10' [ Value: '10' Default: 'false' Type: 'int8' ] Option: 'IRQ11' [ Value: '11' Default: 'false' Type: 'int8' ] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0021' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Boot Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Numlock' [ VarStore: '0x08', QuestionId: '0x0f', Help: 'Selects Power-on state for Numlock'] Option: 'Off' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'On' [ Value: '1' Default: 'true' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0022' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Peripheral Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Serial Port A' [ VarStore: '0x0a', QuestionId: '0x2030', Help: 'Configure Serial port A using options : [Disable] No Configuration [Enable] User Configuration [Auto] EFI/OS chooses configuration'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Auto' [ Value: '1' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '2' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x2030' ] in ('0x00','0x01') | Select option: ' Base I/O Address' [ VarStore: '0x0b', QuestionId: '0x2031', Help: ' '] | Option: '2E8' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: '2F8' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: '3E8' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: '3F8' [ Value: '3' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' Interrupt' [ VarStore: '0x0c', QuestionId: '0x2032', Help: ' '] Option: 'IRQ3' [ Value: '3' Default: 'false' Type: 'int8' ] Option: 'IRQ4' [ Value: '4' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Infrared Port' [ VarStore: '0x0f', QuestionId: '0x2033', Help: 'Configure Infrared port using options : [Disable] No Configuration [Enable] User Configuration [Auto] EFI/OS chooses configuration'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Auto' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '2' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2033' ] == 0x00 | Select option: ' Mode' [ VarStore: '0x12', QuestionId: '0x10', Help: 'Set the mode for the parallel port using options'] | Option: 'CIR' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'FIR' [ Value: '2' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x2033' ] in ('0x00','0x01') | Select option: ' Base I/O Address' [ VarStore: '0x10', QuestionId: '0x2034', Help: ' '] | Option: '2E8' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: '2F8' [ Value: '1' Default: 'true' Type: 'int8' ] | Option: '3E8' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: '3F8' [ Value: '3' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' Interrupt' [ VarStore: '0x11', QuestionId: '0x2035', Help: ' '] Option: 'IRQ3' [ Value: '3' Default: 'true' Type: 'int8' ] Option: 'IRQ4' [ Value: '4' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x2033' ] in ('0x00','0x01') | Question [ ID: '0x10' ] == 0x00 | OR expression └- END IF Suppress; Select option: ' DMA Channel' [ VarStore: '0x13', QuestionId: '0x11', Help: ' '] Option: 'DMA 1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'DMA 2' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'DMA 3' [ Value: '3' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x2033' ] in ('0x00','0x01') | Question [ ID: '0x10' ] == 0x01 | OR expression └- END IF Suppress; Select option: 'High Speed' [ VarStore: '0x14', QuestionId: '0x12', Help: 'Set FIR to High speed mode or normal speed mode'] Option: 'Normal Speed' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'High Speed' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Azalia' [ VarStore: '0x33', QuestionId: '0x13', Help: 'AUTO: Auto detect the Azalia codec. DISABLED: Disable the Azalia controller can be selectable.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Option: 'Auto' [ Value: '2' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x13' ] == 0x00 | Select option: 'Azalia internal HDMI codec' [ VarStore: '0xe8', QuestionId: '0x14', Help: 'Enable/Disable internal HDMI codec for Azalia.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x13' ] == 0x00 | Select option: 'Azalia PME Enable' [ VarStore: '0xe9', QuestionId: '0x15', Help: 'Enable/Disable PME for Azalia.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | EQ == TRUE | Select option: 'Lan' [ VarStore: '0xe6', QuestionId: '0x16', Help: 'ENABLE: Enable the Lan controller. DISABLED: Disable the Lan controller can be selectable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x16' ] == 0x00 | Select option: 'SLP_LAN# Low on DC Power' [ VarStore: '0xe7', QuestionId: '0x17', Help: 'Enable/Disable SLP_LAN# Low on DC Power.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0023' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'IDE Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'IDE Controller' [ VarStore: '0x36', QuestionId: '0x18', Help: 'DISABLED: Disables SATA Controller. ENABLED: Enables SATA Controller.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x00 | Reference: 'Software Feature Mask Configuration' [ FormID: '0x1c20', QuestionId: '0x19', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | EQ == TRUE | Select option: 'AHCI Option ROM Support' [ VarStore: '0x2d1', QuestionId: '0x2065', Help: 'If AHCI option ROM set disable ,the system can only detect port 0 to port 3.If AHCI option ROM set enable ,the system can detect all port.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: 'Aggressive LPM Support' [ VarStore: '0x2d2', QuestionId: '0x1a', Help: 'Enable/Disable Support Aggressive Link Power Management(SALP)'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x01') | Select option: 'Alternate ID' [ VarStore: '0x2d3', QuestionId: '0x1b', Help: 'Report alternate Device ID'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: 'SATA Port 0 HotPlug' [ VarStore: '0x2d4', QuestionId: '0x1c', Help: 'Enable/Disable SATA Port 0 HotPlug'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Spin-Up Device' [ VarStore: '0x2e2', QuestionId: '0x1d', Help: 'Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' SATA Device Type' [ VarStore: '0x328', QuestionId: '0x1e', Help: 'Identify Solid state Drive or Hard Disk Drive'] Option: 'Hard Disk Drive' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Solid State Drive' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Port Multiplier' [ VarStore: '0x2da', QuestionId: '0x1f', Help: 'Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: 'SATA Port 1 HotPlug' [ VarStore: '0x2d5', QuestionId: '0x20', Help: 'Enable/Disable SATA Port 1 HotPlug'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Spin-Up Device' [ VarStore: '0x2e3', QuestionId: '0x21', Help: 'Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' SATA Device Type' [ VarStore: '0x329', QuestionId: '0x22', Help: 'Identify Solid state Drive or Hard Disk Drive'] Option: 'Hard Disk Drive' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Solid State Drive' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Port Multiplier' [ VarStore: '0x2db', QuestionId: '0x23', Help: 'Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: 'SATA Port 2 HotPlug' [ VarStore: '0x2d6', QuestionId: '0x24', Help: 'Enable/Disable SATA Port 2 HotPlug'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Spin-Up Device' [ VarStore: '0x2e4', QuestionId: '0x25', Help: 'Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' SATA Device Type' [ VarStore: '0x32a', QuestionId: '0x26', Help: 'Identify Solid state Drive or Hard Disk Drive'] Option: 'Hard Disk Drive' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Solid State Drive' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Port Multiplier' [ VarStore: '0x2dc', QuestionId: '0x27', Help: 'Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: 'SATA Port 3 HotPlug' [ VarStore: '0x2d7', QuestionId: '0x28', Help: 'Enable/Disable SATA Port 3 HotPlug'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Spin-Up Device' [ VarStore: '0x2e5', QuestionId: '0x29', Help: 'Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' SATA Device Type' [ VarStore: '0x32b', QuestionId: '0x2a', Help: 'Identify Solid state Drive or Hard Disk Drive'] Option: 'Hard Disk Drive' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Solid State Drive' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Port Multiplier' [ VarStore: '0x2dd', QuestionId: '0x2b', Help: 'Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: 'SATA Port 4 HotPlug' [ VarStore: '0x2d8', QuestionId: '0x2c', Help: 'Enable/Disable SATA Port 4 HotPlug'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Spin-Up Device' [ VarStore: '0x2e6', QuestionId: '0x2d', Help: 'Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' SATA Device Type' [ VarStore: '0x32c', QuestionId: '0x2e', Help: 'Identify Solid state Drive or Hard Disk Drive'] Option: 'Hard Disk Drive' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Solid State Drive' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Port Multiplier' [ VarStore: '0x2de', QuestionId: '0x2f', Help: 'Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression | Question [ ID: '0x2f' ] == 0x00 | OR expression └- END IF Suppress; Select option: ' FIS-Port Multiplier' [ VarStore: '0x2e0', QuestionId: '0x30', Help: 'Designates This Port Supports FIS-Based Port Multiplier.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: 'SATA Port 5 HotPlug' [ VarStore: '0x2d9', QuestionId: '0x31', Help: 'Enable/Disable SATA Port 5 HotPlug'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Spin-Up Device' [ VarStore: '0x2e7', QuestionId: '0x32', Help: 'Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' SATA Device Type' [ VarStore: '0x32d', QuestionId: '0x33', Help: 'Identify Solid state Drive or Hard Disk Drive'] Option: 'Hard Disk Drive' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Solid State Drive' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression └- END IF Suppress; Select option: ' Port Multiplier' [ VarStore: '0x2df', QuestionId: '0x34', Help: 'Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | NOT expression | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Select option: ' FIS-Port Multiplier' [ VarStore: '0x2e1', QuestionId: '0x35', Help: 'Designates This Port Supports FIS-Based Port Multiplier.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'SATA Test Mode' [ VarStore: '0x24b', QuestionId: '0x36', Help: 'DISABLED: Disables SATA Test Mode. ENABLED: ENABLED SATA Test Mode.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enable' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x47' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x47' ] == 0x02 | Reference: 'Serial ATA Port 0 ' [ FormID: '0x0230', QuestionId: '0x37', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x46' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x46' ] == 0x02 | Reference: 'Serial ATA Port 1 ' [ FormID: '0x0231', QuestionId: '0x38', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x45' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x45' ] == 0x02 | Reference: 'Serial ATA Port 2 ' [ FormID: '0x0232', QuestionId: '0x39', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x44' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x44' ] == 0x02 | Reference: 'Serial ATA Port 3 ' [ FormID: '0x0233', QuestionId: '0x3a', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x43' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x43' ] == 0x02 | Reference: 'Serial ATA Port 4 ' [ FormID: '0x0234', QuestionId: '0x3b', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x42' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x42' ] == 0x02 | Reference: 'Serial ATA Port 5 ' [ FormID: '0x0235', QuestionId: '0x3c', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x41' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x41' ] == 0x02 | Reference: 'Serial ATA Port 6 ' [ FormID: '0x0236', QuestionId: '0x3d', VarStore: '0xffff' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x40' ] == 0x00 | Question [ ID: '0x18' ] == 0x00 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x40' ] == 0x02 | Reference: 'Serial ATA Port 7 ' [ FormID: '0x0237', QuestionId: '0x3e', VarStore: '0xffff' ] └- END IF Suppress; Text: ' ' Default: '' Help: ' ' ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x01','0x02','0x03','0x04') | Text: 'Serial ATA Port 1 ' Default: '' Help: 'Serial ATA Port 0 ' | Text: 'Serial ATA Port 3 ' Default: '' Help: 'Serial ATA Port 2 ' | Text: 'Serial ATA Port 5 ' Default: '' Help: 'Serial ATA Port 4 ' | Text: 'Serial ATA Port 7 ' Default: '' Help: 'Serial ATA Port 6 ' | Text: ' ' Default: '' Help: ' ' | Text: ' ' Default: '' Help: ' ' | Text: ' ' Default: '' Help: ' ' | Text: ' ' Default: '' Help: ' ' | Text: ' ' Default: '' Help: ' ' | Text: ' ' Default: '' Help: ' ' | Text: ' ' Default: '' Help: ' ' | Text: ' ' Default: '' Help: ' ' └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1c20' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Software Feature Mask Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'HDD Unlock' [ VarStore: '0x2e8', QuestionId: '0x48', Help: 'If enable, indicates that the HDD password unlock in the OS is enable.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'LED Locate' [ VarStore: '0x2e9', QuestionId: '0x49', Help: 'If enable, indicates that the LED/SGPIO hardware is attached and ping to locate feature is enable on the OS.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x01 | Select option: 'RAID0' [ VarStore: '0x2ea', QuestionId: '0x4a', Help: 'Enable/Disable RAID0 feature.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x01 | Select option: 'RAID1' [ VarStore: '0x2eb', QuestionId: '0x4b', Help: 'Enable/Disable RAID1 feature.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x01 | Select option: 'RAID10' [ VarStore: '0x2ec', QuestionId: '0x4c', Help: 'Enable/Disable RAID10 feature.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x01 | Select option: 'RAID5' [ VarStore: '0x2ed', QuestionId: '0x4d', Help: 'Enable/Disable RAID5 feature.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x01 | Select option: 'Intel Rapid Recovery Technology'[ VarStore: '0x2ee', QuestionId: '0x4e', Help: 'Enable/Disable Intel Rapid Recovery Technology feature.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x01 | Select option: 'OROM UI and BANNER' [ VarStore: '0x2ef', QuestionId: '0x4f', Help: 'If enabled, then the OROM UI is shown. Otherwise, no OROM banner or information will be displayed if all disks and RAID volumes are Normal.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3f' ] == 0x01 | Select option: 'IRRT Only on eSATA' [ VarStore: '0x2f0', QuestionId: '0x50', Help: 'If enabled, then only IRRT volumes can span internal and eSATA drivers. If disabled, then any RAID volume can span internal and eSATA drives.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0230' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 0 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x55' ] == 0x00 | OR expression | Question [ ID: '0x54' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x54' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x55' ] == 0x00 | Question [ ID: '0x54' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x52' ] == 0x00 | OR expression | Question [ ID: '0x51' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x51' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x52' ] == 0x00 | Question [ ID: '0x51' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0231' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 1 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x59' ] == 0x00 | OR expression | Question [ ID: '0x58' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x58' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x59' ] == 0x00 | Question [ ID: '0x58' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x57' ] == 0x00 | OR expression | Question [ ID: '0x56' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x56' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x57' ] == 0x00 | Question [ ID: '0x56' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0232' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 2 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x5d' ] == 0x00 | OR expression | Question [ ID: '0x5c' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x5c' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x5d' ] == 0x00 | Question [ ID: '0x5c' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x5b' ] == 0x00 | OR expression | Question [ ID: '0x5a' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x5a' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x5b' ] == 0x00 | Question [ ID: '0x5a' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0233' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 3 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x61' ] == 0x00 | OR expression | Question [ ID: '0x60' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x60' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x61' ] == 0x00 | Question [ ID: '0x60' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x5f' ] == 0x00 | OR expression | Question [ ID: '0x5e' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x5e' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x5f' ] == 0x00 | Question [ ID: '0x5e' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0234' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 4 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x65' ] == 0x00 | OR expression | Question [ ID: '0x64' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x64' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x65' ] == 0x00 | Question [ ID: '0x64' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x63' ] == 0x00 | OR expression | Question [ ID: '0x62' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x62' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x63' ] == 0x00 | Question [ ID: '0x62' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0235' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 5 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x69' ] == 0x00 | OR expression | Question [ ID: '0x68' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x68' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x69' ] == 0x00 | Question [ ID: '0x68' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x67' ] == 0x00 | OR expression | Question [ ID: '0x66' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x66' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x67' ] == 0x00 | Question [ ID: '0x66' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0236' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 6 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x6d' ] == 0x00 | OR expression | Question [ ID: '0x6c' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x6c' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x6d' ] == 0x00 | Question [ ID: '0x6c' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x6b' ] == 0x00 | OR expression | Question [ ID: '0x6a' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x6a' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x6b' ] == 0x00 | Question [ ID: '0x6a' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0237' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Serial ATA Port 7 ' Text: 'HDD Password Is :' Default: 'Clear' Help: ' ' Text: ' ' Default: '' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x71' ] == 0x00 | OR expression | Question [ ID: '0x70' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x70' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x00','0x03','0x04') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x71' ] == 0x00 | Question [ ID: '0x70' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x6f' ] == 0x00 | OR expression | Question [ ID: '0x6e' ] == 0x01 | OR expression └- END IF Suppress; Password: Set HDD Password [ VarStore: '0xa5', Help: 'Lock Harddisk and suggest the length of password greater than one character.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x6e' ] == 0x00 | OR expression └- END IF Suppress; Password: Unlock HDD Security [ VarStore: '0xa5', Help: 'Input Harddisk password to unlock device.'] ┌- Grayout IF: | LIST [ ID: '0x0e' ] in ('0x02','0x03') | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x3f' ] in ('0x01','0x02') | Question [ ID: '0x53' ] == 0x00 | OR expression | Question [ ID: '0x6f' ] == 0x00 | Question [ ID: '0x6e' ] == 0x00 | AND expression | OR expression └- END IF Suppress; Password: Set Master Hdd Password [ VarStore: '0xad', Help: 'Set master Harddisk password and suggest the length of password greater than one character.'] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0024' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Thermal Configuration' Reference: 'Platform Thermal Configuration' [ FormID: '0x0240', QuestionId: '0x72', VarStore: '0xffff' ] Reference: 'Cpu Thermal Configuration' [ FormID: '0x0241', QuestionId: '0x73', VarStore: '0xffff' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0240' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Platform Thermal Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Shut Down Temperature' [ VarStore: '0x1a5', QuestionId: '0x74', Help: 'ACPI Critical Trip Point - the point in which the OS will shut down the system.'] Option: '70 ?C' [ Value: '70' Default: 'false' Type: 'int8' ] Option: '75 ?C' [ Value: '75' Default: 'false' Type: 'int8' ] Option: '80 ?C' [ Value: '80' Default: 'false' Type: 'int8' ] Option: '85 ?C' [ Value: '85' Default: 'false' Type: 'int8' ] Option: '90 ?C' [ Value: '90' Default: 'false' Type: 'int8' ] Option: '100 ?C' [ Value: '100' Default: 'true' Type: 'int8' ] Option: '110 ?C' [ Value: '110' Default: 'false' Type: 'int8' ] Option: '120 ?C' [ Value: '120' Default: 'false' Type: 'int8' ] Number question: Prompt: Low Fan Speed , Help: ACPI Active Trip Point - Value must be between 0(Fan off) - 100(Max Fan speed). This is the speed at which fan will run when fan on low Fan speed. └- [ QuestionId: '0x75', VarStore: '0x1a8' , Type: '10', MinValue: '0', MaxValue: '100', Step: '1' ] Default value: '75', Type: 0x00 Select option: 'Low Fan Speed Temperature' [ VarStore: '0x1a7', QuestionId: '0x76', Help: 'ACPI Active Trip Point - the point in which the OS will turn the processor fan on Low.'] Option: '40 ?C' [ Value: '40' Default: 'false' Type: 'int8' ] Option: '45 ?C' [ Value: '45' Default: 'false' Type: 'int8' ] Option: '50 ?C' [ Value: '50' Default: 'false' Type: 'int8' ] Option: '55 ?C' [ Value: '55' Default: 'true' Type: 'int8' ] Option: '60 ?C' [ Value: '60' Default: 'false' Type: 'int8' ] Option: '65 ?C' [ Value: '65' Default: 'false' Type: 'int8' ] Option: '70 ?C' [ Value: '70' Default: 'false' Type: 'int8' ] Option: '75 ?C' [ Value: '75' Default: 'false' Type: 'int8' ] Number question: Prompt: High Fan Speed , Help: ACPI Active Trip Point - Value must be between 0(Fan off) - 100(Max Fan speed). This is the speed at which fan will run when fan on High Fan speed. └- [ QuestionId: '0x77', VarStore: '0x1a6' , Type: '10', MinValue: '0', MaxValue: '100', Step: '1' ] Default value: '100', Type: 0x00 Select option: 'High Fan Speed Temperature' [ VarStore: '0x1a9', QuestionId: '0x78', Help: 'ACPI Active Trip Point - the point in which the OS will turn the processor fan on High.'] Option: '40 ?C' [ Value: '40' Default: 'false' Type: 'int8' ] Option: '45 ?C' [ Value: '45' Default: 'false' Type: 'int8' ] Option: '50 ?C' [ Value: '50' Default: 'false' Type: 'int8' ] Option: '55 ?C' [ Value: '55' Default: 'false' Type: 'int8' ] Option: '60 ?C' [ Value: '60' Default: 'false' Type: 'int8' ] Option: '65 ?C' [ Value: '65' Default: 'false' Type: 'int8' ] Option: '70 ?C' [ Value: '70' Default: 'true' Type: 'int8' ] Option: '75 ?C' [ Value: '75' Default: 'false' Type: 'int8' ] Select option: 'Throttle On Temperature' [ VarStore: '0x1aa', QuestionId: '0x79', Help: 'Set the CPU temperature point of Throttle On'] Option: '40 ?C' [ Value: '40' Default: 'false' Type: 'int8' ] Option: '45 ?C' [ Value: '45' Default: 'false' Type: 'int8' ] Option: '50 ?C' [ Value: '50' Default: 'false' Type: 'int8' ] Option: '55 ?C' [ Value: '55' Default: 'false' Type: 'int8' ] Option: '60 ?C' [ Value: '60' Default: 'false' Type: 'int8' ] Option: '65 ?C' [ Value: '65' Default: 'false' Type: 'int8' ] Option: '70 ?C' [ Value: '70' Default: 'false' Type: 'int8' ] Option: '75 ?C' [ Value: '75' Default: 'false' Type: 'int8' ] Option: '80 ?C' [ Value: '80' Default: 'false' Type: 'int8' ] Option: '85 ?C' [ Value: '85' Default: 'true' Type: 'int8' ] Option: '90 ?C' [ Value: '90' Default: 'false' Type: 'int8' ] Number question: Prompt: TC1, Help: Thermal constant TC1 for the ACPI Passive Cooling ( CPU Throttle On ) Formula. └- [ QuestionId: '0x7a', VarStore: '0x1ab' , Type: '10', MinValue: '1', MaxValue: '16', Step: '1' ] Default value: '2', Type: 0x00 Number question: Prompt: TC2, Help: Thermal constant TC2 for the ACPI Passive Cooling ( CPU Throttle On ) Formula. └- [ QuestionId: '0x7b', VarStore: '0x1ac' , Type: '10', MinValue: '1', MaxValue: '16', Step: '1' ] Default value: '5', Type: 0x00 Number question: Prompt: TSP, Help: It represents in tenths of a second how often the OS will read the temperature when Passive Cooling is enabled. └- [ QuestionId: '0x7c', VarStore: '0x1ad' , Type: '10', MinValue: '2', MaxValue: '32', Step: '1' ] Default value: '10', Type: 0x00 ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'ME SMBus Thermal Reporting' [ VarStore: '0x1ae', QuestionId: '0x7d', Help: 'Enable/Disable ME SMBus Thermal Reporting Configuration'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x7d' ] == 0x00 | Select option: ' SMBus Buffer Length' [ VarStore: '0x1af', QuestionId: '0x7e', Help: 'SMBus Block Read Message Length for EC'] | Option: '1' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: '2' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: '5' [ Value: '5' Default: 'false' Type: 'int8' ] | Option: '9' [ Value: '9' Default: 'false' Type: 'int8' ] | Option: '10' [ Value: '10' Default: 'false' Type: 'int8' ] | Option: '14' [ Value: '14' Default: 'false' Type: 'int8' ] | Option: '20' [ Value: '20' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' Thermal Reporting EC PEC' [ VarStore: '0x1b0', QuestionId: '0x7f', Help: 'Enable Packet Error Checking(PEC) for SMBus Block Read'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' Slots with TS on DIMM's' [ VarStore: '0x1b1', QuestionId: '0x80', Help: 'Enable Temperature Reporting for Slots with TS on DIMM. NOTE:DIMM0 is the one closer to CPU'] Option: 'No TS on DIMM' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Slot DIMM0' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Slot DIMM1' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'Slot DIMM0 and DIMM1' [ Value: '3' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: ' CPU Temp Read' [ VarStore: '0x1b2', QuestionId: '0x81', Help: 'CPU Temperature Read Enable'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: ' CPU Energy Read' [ VarStore: '0x1b3', QuestionId: '0x82', Help: 'CPU Energy Read Enable'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: ' PCH Temp Read' [ VarStore: '0x1b5', QuestionId: '0x83', Help: 'PCH Temperature Read Enable'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'TS on DIMM' [ VarStore: '0x1b6', QuestionId: '0x84', Help: 'Enable/Disable Thermal Sensor on DIMM'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' DIMM1 TS READ' [ VarStore: '0x1b7', QuestionId: '0x85', Help: 'DIMM1 Thermal Sensor Read Enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' DIMM2 TS READ' [ VarStore: '0x1b8', QuestionId: '0x86', Help: 'DIMM2 Thermal Sensor Read Enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' DIMM3 TS READ' [ VarStore: '0x1b9', QuestionId: '0x87', Help: 'DIMM3 Thermal Sensor Read Enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' DIMM4 TS READ' [ VarStore: '0x1ba', QuestionId: '0x88', Help: 'DIMM4 Thermal Sensor Read Enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x3610' ] == 0x01 | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | OR expression └- END IF Grayout; Select option: 'Thermal Device' [ VarStore: '0x1bb', QuestionId: '0x89', Help: 'Thermal Device (D31F6) Enable/Disable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x89' ] == 0x00 | Select option: 'Alert Enable Lock' [ VarStore: '0x1bc', QuestionId: '0x8a', Help: 'Lock all Alert Enable settings'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCH Alert' [ VarStore: '0x1bd', QuestionId: '0x8b', Help: 'PCH Alert pin enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' DIMM Alert' [ VarStore: '0x1be', QuestionId: '0x8c', Help: 'DIMM Alert pin enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0241' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Cpu Thermal Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'DTS' [ VarStore: '0x1cb', QuestionId: '0x8e', Help: 'Enables CPU Digitial Thermal Sensor function.Out of Spec: ACPI Thermal Managemnet uses EC reported temperature values and DTS SMM is used to handle Out of Spec condition.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Critical Reporting' [ Value: '2' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Bi-Directional PROCHOT#' [ VarStore: '0x1cd', QuestionId: '0x8f', Help: 'When a processor thermal sensor trips(either core),the PROCHOT# will be driven.If bi-directional is enable ,external agents can drive PROCHOT# to throttle.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'ACPI 3.0 T-States' [ VarStore: '0x1ca', QuestionId: '0x90', Help: 'Enable/Disable ACPI 3.0 T-States.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0025' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Video Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Special Features' [ VarStore: '0x1e6', QuestionId: '0x91', Help: 'Enable Switch Graphic Function'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Reference: 'Internal Graphic Device' [ FormID: '0x0250', QuestionId: '0x92', VarStore: '0xffff' ] Reference: 'Pci Express Graphic' [ FormID: '0x0251', QuestionId: '0x93', VarStore: '0xffff' ] Reference: 'SA DMI Configuration' [ FormID: '0x0252', QuestionId: '0x94', VarStore: '0xffff' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0250' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Internal Graphic Device' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Internal Graphics Device ' [ VarStore: '0x193', QuestionId: '0xa02', Help: 'Enable IGD '] Option: 'Auto' [ Value: '2' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'RC6 (Render Standby)' [ VarStore: '0x194', QuestionId: '0x95', Help: 'Graphic Render C-State(RC6) is a technique designed to optimize the average power to the graphics render engine during times of idleness of the render engine.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Deep Render Standby' [ VarStore: '0x20a', QuestionId: '0x96', Help: 'Configure Deep Render Standby'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'IGD - Gtt Size' [ VarStore: '0x195', QuestionId: '0xa01', Help: 'Select the Gtt size'] Option: '1 MB' [ Value: '1' Default: 'false' Type: 'int8' ] Option: '2 MB' [ Value: '2' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'IGD - Aperture Size' [ VarStore: '0x197', QuestionId: '0xa04', Help: 'Select the Aperture Size '] Option: '128 MB' [ Value: '1' Default: 'false' Type: 'int8' ] Option: '256 MB' [ Value: '2' Default: 'true' Type: 'int8' ] Option: '512 MB' [ Value: '3' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'IGD - DVMT Pre-Allocated' [ VarStore: '0x198', QuestionId: '0xa00', Help: 'Select DVMT5.0 Pre-Allocated(Fixed) Graphics Memory size used by the Internal Graphics Device.'] Option: '0 MB' [ Value: '0' Default: 'false' Type: 'int8' ] Option: '32 MB' [ Value: '1' Default: 'false' Type: 'int8' ] Option: '64 MB' [ Value: '2' Default: 'true' Type: 'int8' ] Option: '96 MB' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '128 MB' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '160 MB' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '192 MB' [ Value: '6' Default: 'false' Type: 'int8' ] Option: '224 MB' [ Value: '7' Default: 'false' Type: 'int8' ] Option: '256 MB' [ Value: '8' Default: 'false' Type: 'int8' ] Option: '288 MB' [ Value: '9' Default: 'false' Type: 'int8' ] Option: '320 MB' [ Value: '10' Default: 'false' Type: 'int8' ] Option: '352 MB' [ Value: '11' Default: 'false' Type: 'int8' ] Option: '384 MB' [ Value: '12' Default: 'false' Type: 'int8' ] Option: '416 MB' [ Value: '13' Default: 'false' Type: 'int8' ] Option: '448 MB' [ Value: '14' Default: 'false' Type: 'int8' ] Option: '480 MB' [ Value: '15' Default: 'false' Type: 'int8' ] Option: '512 MB' [ Value: '16' Default: 'false' Type: 'int8' ] Option: '1024 MB' [ Value: '17' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'IGD - DVMT Size' [ VarStore: '0x199', QuestionId: '0x97', Help: ' Select the size of DVMT 5.0 that the Internal Graphics Device will use'] Option: '128 MB' [ Value: '1' Default: 'false' Type: 'int8' ] Option: '256 MB' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'MAX' [ Value: '255' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xa2' ] == 0x02 | Select option: 'IGD - Boot Type' [ VarStore: '0x19a', QuestionId: '0x98', Help: 'Select the Video Device that will be activated during POST'] | Option: 'VBIOS Default' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ] | Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ] | Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ] | Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ] | Option: 'LFP2' [ Value: '128' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xa2' ] == 0x02 | Question [ ID: '0x98' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'IGD - Boot Type 2' [ VarStore: '0x19b', QuestionId: '0x99', Help: 'Select Secondary Display Device'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ] Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ] Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ] Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ] Option: 'LFP2' [ Value: '128' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xa2' ] == 0x02 | NOT expression └- END IF Suppress; Select option: 'IGD - Boot Type' [ VarStore: '0x19a', QuestionId: '0x9a', Help: 'Select the Video Device that will be activated during POST'] Option: 'VBT Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ] Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ] Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ] Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ] ┌- Suppress IF: | Question [ ID: '0xa2' ] == 0x02 | NOT expression | Question [ ID: '0x9a' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'IGD - Boot Type 2' [ VarStore: '0x19b', QuestionId: '0x9b', Help: 'Select Secondary Display Device'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'CRT' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'LFP' [ Value: '8' Default: 'false' Type: 'int8' ] Option: 'EFP' [ Value: '4' Default: 'false' Type: 'int8' ] Option: 'EFP2' [ Value: '64' Default: 'false' Type: 'int8' ] Option: 'EFP3' [ Value: '32' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'IGD - LCD Panel Type' [ VarStore: '0x19c', QuestionId: '0x9c', Help: 'Select the Panel used by the Internal Graphics Device by selecting the appropriate setup item'] Option: '640x480 LVDS' [ Value: '1' Default: 'false' Type: 'int8' ] Option: '800x600 LVDS' [ Value: '2' Default: 'false' Type: 'int8' ] Option: '1024x768 LVDS1' [ Value: '3' Default: 'true' Type: 'int8' ] Option: '1280x1024 LVDS' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '1400x1050 LVDS1' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1400x1050 LVDS2' [ Value: '6' Default: 'false' Type: 'int8' ] Option: '1600x1200 LVDS' [ Value: '7' Default: 'false' Type: 'int8' ] Option: '1366x768 LVDS' [ Value: '8' Default: 'false' Type: 'int8' ] Option: '1680x1050 LVDS' [ Value: '9' Default: 'false' Type: 'int8' ] Option: '1920x1200 LVDS' [ Value: '10' Default: 'false' Type: 'int8' ] Option: '1440x900 LVDS' [ Value: '11' Default: 'false' Type: 'int8' ] Option: '1600x900 LVDS' [ Value: '12' Default: 'false' Type: 'int8' ] Option: '1024x768 LVDS2' [ Value: '13' Default: 'false' Type: 'int8' ] Option: '1280x800 LVDS' [ Value: '14' Default: 'false' Type: 'int8' ] Option: '1920x1080 LVDS' [ Value: '15' Default: 'false' Type: 'int8' ] Option: '2048x1536 LVDS' [ Value: '16' Default: 'false' Type: 'int8' ] Select option: 'Backlight Control' [ VarStore: '0x19d', QuestionId: '0x9d', Help: 'Backlight Control Setting'] Option: 'PWM Inverted' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'PWM Normal' [ Value: '2' Default: 'true' Type: 'int8' ] Option: 'GMBUS Inverted' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'GMBUS Normal' [ Value: '3' Default: 'false' Type: 'int8' ] Select option: 'IGD - TV' [ VarStore: '0x19e', QuestionId: '0x9e', Help: 'Select the TV standard used by the Internal Graphics Device'] Option: 'VBIOS Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'NTSC' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'PAL' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'SECAM' [ Value: '3' Default: 'false' Type: 'int8' ] Select option: 'IGD - Gfx Low Power Mode' [ VarStore: '0x19f', QuestionId: '0x9f', Help: 'This option is applicable for SFF only.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Active LFP' [ VarStore: '0x1a0', QuestionId: '0xa0', Help: 'Selects the Active LFP Configuration'] Option: 'No LVDS' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Int-LVDS' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'SDVO LVDS' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'eDP' [ Value: '3' Default: 'false' Type: 'int8' ] Option: 'VBIOS Default' [ Value: '255' Default: 'true' Type: 'int8' ] Select option: 'Panel Color Depth' [ VarStore: '0x1a1', QuestionId: '0xa1', Help: 'Select the LFP Panel Color Depth'] Option: '18 Bit' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '24 Bit' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0251' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Pci Express Graphic' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCIE Reset Delay' [ VarStore: '0x340', QuestionId: '0xa3', Help: 'Delay for PCIE reset. Set to longer time if PEG doesn't work.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: '50 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '100 ms' [ Value: '10' Default: 'true' Type: 'int8' ] Option: '200 ms' [ Value: '20' Default: 'false' Type: 'int8' ] Option: '300 ms' [ Value: '30' Default: 'false' Type: 'int8' ] Select option: 'ASPM' [ VarStore: '0x1a2', QuestionId: '0xa4', Help: 'Control ASPM support for the PEG Device.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] Select option: 'PEG0 - Gen X' [ VarStore: '0x206', QuestionId: '0xa05', Help: 'Configure PEG0 B0:D1:F0 Gen1-Gen2'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ] Select option: 'PEG1 - Gen X' [ VarStore: '0x207', QuestionId: '0xa06', Help: 'Configure PEG0 B0:D1:F1 Gen1-Gen2'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ] Select option: 'PEG2 - Gen X' [ VarStore: '0x208', QuestionId: '0xa07', Help: 'Configure PEG0 B0:D1:F2 Gen1-Gen2'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ] Select option: 'PEG3 - Gen X' [ VarStore: '0x209', QuestionId: '0xa08', Help: 'Configure PEG0 B0:D6:F0 Gen1-Gen2'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'Gen3' [ Value: '3' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0xa4' ] in ('0x00','0x02','0x04') | Select option: ' ASPM L0s' [ VarStore: '0x1a3', QuestionId: '0xa5', Help: 'Enable PCIe ASPM L0s.'] | Option: 'Root Port Only' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'Endpoint Port Only' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'Root&Endpoint Ports' [ Value: '3' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0xa4' ] in ('0x00','0x02','0x04') | Question [ ID: '0xa5' ] == 0x02 | OR expression └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Always Enable PEG' [ VarStore: '0x196', QuestionId: '0xa6', Help: 'To enable the PEG'] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0xa8' ] in ('0x00','0x01','0x02','0x03') | Question [ ID: '0x91' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'PowerXpress Setting' [ VarStore: '0x1e7', QuestionId: '0xa7', Help: 'Setting Mux or Muxless'] Option: 'Muxless Fixed Scheme Only' [ Value: '5' Default: 'false' Type: 'int8' ] Option: 'Muxless Dynamic Scheme Only' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Muxless Fixed and Dynamic Scheme' [ Value: '7' Default: 'true' Type: 'int8' ] Option: 'Full dGPU PowerOff Dynamic Scheme' [ Value: '8' Default: 'false' Type: 'int8' ] Option: 'Fixed and Full dGPU PowerOff Dynamic [ Value: '13' Default: 'false' Type: 'int8' ] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0252' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'SA DMI Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'DMI Link ASPM Control' [ VarStore: '0x201', QuestionId: '0xa9', Help: 'The control of Active State Power Management on NB side of the DMI Link.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] Select option: 'DMI Extended Synch Control' [ VarStore: '0x202', QuestionId: '0xaa', Help: 'Enable/Disable DMI Extended Synchronization'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: 'DMI Vc1 Control' [ VarStore: '0x1fe', QuestionId: '0xab', Help: 'Enable/Disable DMI Vc1'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'DMI Vcp Control' [ VarStore: '0x1ff', QuestionId: '0xac', Help: 'Enable/Disable DMI Vcp'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'DMI Vcm Control' [ VarStore: '0x200', QuestionId: '0xad', Help: 'Enable/Disable DMI Vcm'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'DMI Gen 2' [ VarStore: '0x204', QuestionId: '0xae', Help: 'Enable/Disable DMI Gen 2'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Auto' [ Value: '2' Default: 'true' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0026' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'USB Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'USB Legacy' [ VarStore: '0x48', QuestionId: '0xaf', Help: 'USB devices boot and access in DOS'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'XHCI Pre-Boot Driver' [ VarStore: '0x339', QuestionId: '0x600', Help: 'Enable/Disable XHCI Pre-Boot Driver support'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x600' ] == 0x00 | Select option: 'XHCI' [ VarStore: '0xea', QuestionId: '0xb0', Help: 'Configure XHCI Mode'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'Smart Auto' [ Value: '3' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x600' ] == 0x01 | Select option: 'XHCI' [ VarStore: '0xea', QuestionId: '0xb1', Help: 'Configure XHCI Mode'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '2' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb1' ] == 0x00 | Select option: ' HS Port Switch 1' [ VarStore: '0x33a', QuestionId: '0xb2', Help: 'Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' HS Port Switch 2' [ VarStore: '0x33b', QuestionId: '0xb3', Help: 'Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' HS Port Switch 3' [ VarStore: '0x33c', QuestionId: '0xb4', Help: 'Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' HS Port Switch 4' [ VarStore: '0x33d', QuestionId: '0xb5', Help: 'Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' XHCI Streams' [ VarStore: '0x33e', QuestionId: '0xb6', Help: 'Enable/Disable XHCI Streams'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'EHCI 1' [ VarStore: '0xeb', QuestionId: '0xb7', Help: 'Enable/Disable EHCI 1'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'EHCI 2' [ VarStore: '0xec', QuestionId: '0xb8', Help: 'Enable/Disable EHCI 2'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Pre-Port Control' [ VarStore: '0xef', QuestionId: '0xb9', Help: 'Enable/Disable the Per-Port Disable Control Override'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb9' ] == 0x00 | Question [ ID: '0xb7' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'Usb Port0' [ VarStore: '0xf0', QuestionId: '0xba', Help: 'Enable/Disable Port 0'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Usb Port1' [ VarStore: '0xf1', QuestionId: '0xbb', Help: 'Enable/Disable Port 1'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb9' ] == 0x00 | Question [ ID: '0xb7' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'Usb Port2' [ VarStore: '0xf2', QuestionId: '0xbc', Help: 'Enable/Disable Port 2'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Usb Port3' [ VarStore: '0xf3', QuestionId: '0xbd', Help: 'Enable/Disable Port 3'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb9' ] == 0x00 | Question [ ID: '0xb7' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'Usb Port4' [ VarStore: '0xf4', QuestionId: '0xbe', Help: 'Enable/Disable Port 4'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Usb Port5' [ VarStore: '0xf5', QuestionId: '0xbf', Help: 'Enable/Disable Port 5'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb9' ] == 0x00 | Question [ ID: '0xb7' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'Usb Port6' [ VarStore: '0xf6', QuestionId: '0xc0', Help: 'Enable/Disable Port 6'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Usb Port7' [ VarStore: '0xf7', QuestionId: '0xc1', Help: 'Enable/Disable Port 7'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb9' ] == 0x00 | Question [ ID: '0xb8' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'Usb Port8' [ VarStore: '0xf8', QuestionId: '0xc2', Help: 'Enable/Disable Port 8'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Usb Port9' [ VarStore: '0xf9', QuestionId: '0xc3', Help: 'Enable/Disable Port 9'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb9' ] == 0x00 | Question [ ID: '0xb8' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'Usb Port10' [ VarStore: '0xfa', QuestionId: '0xc4', Help: 'Enable/Disable Port 10'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Usb Port11' [ VarStore: '0xfb', QuestionId: '0xc5', Help: 'Enable/Disable Port 11'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xb9' ] == 0x00 | Question [ ID: '0xb8' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'Usb Port12' [ VarStore: '0xfc', QuestionId: '0xc6', Help: 'Enable/Disable Port 12'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Usb Port13' [ VarStore: '0xfd', QuestionId: '0xc7', Help: 'Enable/Disable Port 13'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | EQ == TRUE | Select option: 'USB RMH Mode' [ VarStore: '0xed', QuestionId: '0xc8', Help: 'PCH USB Rate Matching Hubs mode'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xc8' ] == 0x00 | Select option: 'USB RMH1 Enable' [ VarStore: '0xee', QuestionId: '0xc9', Help: 'Enable / Disable USB Rate Matching Hubs 1'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0027' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Chipset Configuration' Subtitle: 'Setup Warning:' Subtitle: 'Setting items on this screen to incorrect values' Subtitle: 'may cause your system to malfunction!' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'CRID' [ VarStore: '0x1e8', QuestionId: '0xca', Help: 'Enable / Disable : Compatible Revision ID ( CRID ) / Stepping Revision ID ( SRID ).'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Port 80h Cycles' [ VarStore: '0x1e9', QuestionId: '0xcb', Help: 'Control where the port 80h cycles are sent.'] Option: 'LPC BUS' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'PCI BUS' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'VT-d' [ VarStore: '0x1ea', QuestionId: '0xcc', Help: 'Check to enable VT-d function on MCH'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xcc' ] == 0x00 | Select option: ' Interrupt Remapping' [ VarStore: '0x1d8', QuestionId: '0xcd', Help: 'Enable/Disable Interrupt Remapping function'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' Pass-Through DMA' [ VarStore: '0x30b', QuestionId: '0xce', Help: 'Enable/Disable Pass-Through DMA'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: 'CHAP DEVICE' [ VarStore: '0x113', QuestionId: '0xcf', Help: 'Enable/Disable CHAP device (Bus 0, Dev 7).'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x8d' ] == 0x01 | Select option: 'DEVICE 4' [ VarStore: '0x114', QuestionId: '0xd0', Help: 'Enable/Disable Thermal device (Bus 0, Dev 4).'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Grayout; Select option: 'Scrambler' [ VarStore: '0x115', QuestionId: '0xd1', Help: 'Enable/Disable scrambling.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Suppress IF: | LIST [ ID: '0x0e' ] in ('0x01','0x03','0x04') | Question [ ID: '0x0d' ] == 0x00 | OR expression └- END IF Suppress; Text: ' ' Default: ' ' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Memory Frequency' [ VarStore: '0x1eb', QuestionId: '0xd2', Help: 'Memory Frequency Selections in Mhz'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '1067' [ Value: '1' Default: 'false' Type: 'int8' ] Option: '1333' [ Value: '2' Default: 'false' Type: 'int8' ] Option: '1600' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '1867' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '2133' [ Value: '5' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'NMode Support' [ VarStore: '0x1ec', QuestionId: '0xd3', Help: 'NMode Support Option'] Option: 'Auto' [ Value: '16' Default: 'true' Type: 'int8' ] Option: '1N Mode' [ Value: '0' Default: 'false' Type: 'int8' ] Option: '2N Mode' [ Value: '2' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Me Fw Image Re-Flash' [ VarStore: '0x1ed', QuestionId: '0xd4', Help: 'Enable /Disable Me Fw Image Re-Flash function'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'After G3 On' [ VarStore: '0x1ee', QuestionId: '0xd5', Help: 'Specify what state to go to when power is re-applied after a power failure (G3 state).'] Option: 'S0' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'S5' [ Value: '1' Default: 'true' Type: 'int8' ] Option: 'Last State' [ Value: '2' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Board Capability' [ VarStore: '0x1ef', QuestionId: '0xd6', Help: 'Board Capability - SUS_PWR_DN_ACK -> Send Disable to PCH. DeepSx -> Show DeepSx Policy.'] Option: 'SUS_PWR_DN_ACK' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'DeepSx' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xd6' ] == 0x00 | Select option: 'DeepSx Power Policies' [ VarStore: '0x1f0', QuestionId: '0xd7', Help: 'Configure The DeepSx Mode Configuration.'] | Option: 'Disable' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enable In S5' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'Enable In S4-S5' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Enable In S3-S4-S5' [ Value: '5' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'GPIO Lockdown' [ VarStore: '0x325', QuestionId: '0xd8', Help: 'Enable/Disable GPIO Lockdown feature. GPIO registers will be READ-ONLY, when enable GPIO Lockdown.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'RTC Lock' [ VarStore: '0x343', QuestionId: '0xd9', Help: 'Enable will lock bytes 38h-3Fh in the lower/upper 128-byte bank of RTC RAM.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | LIST [ ID: '0xdb' ] in ('0x03','0x04') | AND expression └- END IF Grayout; Select option: 'IFR Update' [ VarStore: '0x33f', QuestionId: '0x610', Help: 'Independent FW Recovery. Note **OEM** This is only for OEM to opt-out from IFR Update but not the option for end user.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Max TOLUD' [ VarStore: '0x367', QuestionId: '0x630', Help: 'Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller'] Option: 'Dynamic' [ Value: '0' Default: 'true' Type: 'int16' ] Option: '1 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '1.25 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '1.5 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '1.75 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '2 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '2.25 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '2.5 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '2.75 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '3 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Option: '3.25 GB' [ Value: '0' Default: 'false' Type: 'int16' ] Number question: Prompt: SATA PORT 0 Time Out(MS), Help: Add Delay time for SATA PORT 0, Time Out 0: no delay, Time Out > 0: Max delay time equals Time out, the recommend time is: 1 to 10 MS. └- [ QuestionId: '0xda', VarStore: '0x36a' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] Default value: '0', Type: 0x01 ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0028' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'ACPI Table/Features Control' ┌- Grayout IF: | Question [ ID: '0x950' ] == 0x01 | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression | OR expression └- END IF Grayout; Select option: 'FACP - RTC S4 Wakeup' [ VarStore: '0x53', QuestionId: '0xdc', Help: 'Value only for ACPI. Enable/Disable for S4 Wakeup from RTC'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'APIC - IO APIC Mode' [ VarStore: '0x54', QuestionId: '0xdd', Help: 'This item is valid only for WIN2k and WINXP.Also,a fresh install of the OS must occur when APIC Mode is desired.Test the IO ACPI by setting item to Enable.The APIC Table will then be pointed to by the RSDT,the Local APIC will be initialized,and the proper enable bits will be set in ICH4M'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'TCO WatchDog Support' [ VarStore: '0x326', QuestionId: '0xde', Help: 'Enable/Disable TCO WatchDog Support'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0xde' ] in ('0x00') | Select option: 'WatchDog ACPI Table' [ VarStore: '0x327', QuestionId: '0xdf', Help: 'Enable/Disable to support WatchDog ACPI Table (WDAT)'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0030' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Clock Gating' [ VarStore: '0x121', QuestionId: '0xe1', Help: 'PCI Express Clock Gating Enable/Disable for each root port'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'DMI Link ASPM Control' [ VarStore: '0x120', QuestionId: '0xe2', Help: 'The control of Active State Power Management on SB side of the DMI Link.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'DMI Extended Synch Control' [ VarStore: '0x203', QuestionId: '0xe3', Help: 'Enable/Disable DMI Extended Synchronization'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Suppress IF: | Question [ ID: '0x16' ] == 0x00 | ┌- Grayout IF: | | VALUE = 1 | | VALUE = 1 | | EQUAL expression | └- END IF Grayout; | Text: 'PCIE Port assigned to LAN' Default: 'Not Assigned' Help: ' ' └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0xec' ] == 0x00 | Question [ ID: '0x16' ] == 0x01 | AND expression └- END IF Grayout; Reference: 'PCI Express Root Port 1' [ FormID: '0x0300', QuestionId: '0xe4', VarStore: '0xffff' ] ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | LIST [ ID: '0xec' ] in ('0x00','0x01') | Question [ ID: '0x16' ] == 0x01 | AND expression | OR expression └- END IF Suppress; Reference: 'PCI Express Root Port 2' [ FormID: '0x0301', QuestionId: '0xe5', VarStore: '0xffff' ] ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | LIST [ ID: '0xec' ] in ('0x00','0x02') | Question [ ID: '0x16' ] == 0x01 | AND expression | OR expression └- END IF Suppress; Reference: 'PCI Express Root Port 3' [ FormID: '0x0302', QuestionId: '0xe6', VarStore: '0xffff' ] ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | LIST [ ID: '0xec' ] in ('0x00','0x03') | Question [ ID: '0x16' ] == 0x01 | AND expression | OR expression └- END IF Suppress; Reference: 'PCI Express Root Port 4' [ FormID: '0x0303', QuestionId: '0xe7', VarStore: '0xffff' ] ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | ┌- Grayout IF: | | LIST [ ID: '0xec' ] in ('0x00','0x04') | | Question [ ID: '0x16' ] == 0x01 | | AND expression | └- END IF Grayout; | Reference: 'PCI Express Root Port 5' [ FormID: '0x0304', QuestionId: '0xe8', VarStore: '0xffff' ] └- END IF Suppress; ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | LIST [ ID: '0xec' ] in ('0x00','0x05') | Question [ ID: '0x16' ] == 0x01 | AND expression | OR expression └- END IF Suppress; Reference: 'PCI Express Root Port 6' [ FormID: '0x0305', QuestionId: '0xe9', VarStore: '0xffff' ] ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | LIST [ ID: '0xec' ] in ('0x00','0x06') | Question [ ID: '0x16' ] == 0x01 | AND expression | OR expression └- END IF Suppress; Reference: 'PCI Express Root Port 7' [ FormID: '0x0306', QuestionId: '0xea', VarStore: '0xffff' ] ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | LIST [ ID: '0xec' ] in ('0x00','0x07') | Question [ ID: '0x16' ] == 0x01 | AND expression | OR expression └- END IF Suppress; Reference: 'PCI Express Root Port 8' [ FormID: '0x0307', QuestionId: '0xeb', VarStore: '0xffff' ] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0300' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 1' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 1' [ VarStore: '0x122', QuestionId: '0xee', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x12a', QuestionId: '0xef', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'true' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | Select option: ' URR' [ VarStore: '0x132', QuestionId: '0xf0', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' FER' [ VarStore: '0x13a', QuestionId: '0xf1', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x142', QuestionId: '0xf2', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x14a', QuestionId: '0xf3', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x152', QuestionId: '0xf4', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x162', QuestionId: '0xf5', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x16a', QuestionId: '0xf6', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x172', QuestionId: '0xf7', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x15a', QuestionId: '0xf8', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x17a', QuestionId: '0xf9', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xee' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x182', QuestionId: '0xfa', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x18a', QuestionId: '0xfb', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0301' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 2' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 2' [ VarStore: '0x123', QuestionId: '0xfc', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xfc' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x12b', QuestionId: '0xfd', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'true' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' URR' [ VarStore: '0x133', QuestionId: '0xfe', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' FER' [ VarStore: '0x13b', QuestionId: '0xff', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x143', QuestionId: '0x100', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x14b', QuestionId: '0x101', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x153', QuestionId: '0x102', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x163', QuestionId: '0x103', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x16b', QuestionId: '0x104', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x173', QuestionId: '0x105', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x15b', QuestionId: '0x106', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x17b', QuestionId: '0x107', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0xfc' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x183', QuestionId: '0x108', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x18b', QuestionId: '0x109', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0302' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 3' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 3' [ VarStore: '0x124', QuestionId: '0x10a', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x10a' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x12c', QuestionId: '0x10b', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' URR' [ VarStore: '0x134', QuestionId: '0x10c', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' FER' [ VarStore: '0x13c', QuestionId: '0x10d', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x144', QuestionId: '0x10e', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x14c', QuestionId: '0x10f', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x154', QuestionId: '0x110', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x164', QuestionId: '0x111', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x16c', QuestionId: '0x112', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x174', QuestionId: '0x113', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x15c', QuestionId: '0x114', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x17c', QuestionId: '0x115', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x10a' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x184', QuestionId: '0x116', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x18c', QuestionId: '0x117', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0303' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 4' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 4' [ VarStore: '0x125', QuestionId: '0x118', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x118' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x12d', QuestionId: '0x119', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' URR' [ VarStore: '0x135', QuestionId: '0x11a', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' FER' [ VarStore: '0x13d', QuestionId: '0x11b', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x145', QuestionId: '0x11c', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x14d', QuestionId: '0x11d', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x155', QuestionId: '0x11e', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x165', QuestionId: '0x11f', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x16d', QuestionId: '0x120', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x175', QuestionId: '0x121', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x15d', QuestionId: '0x122', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x17d', QuestionId: '0x123', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x118' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x185', QuestionId: '0x124', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x18d', QuestionId: '0x125', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0304' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 5' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 5' [ VarStore: '0x126', QuestionId: '0x126', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x126' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x12e', QuestionId: '0x127', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' URR' [ VarStore: '0x136', QuestionId: '0x128', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' FER' [ VarStore: '0x13e', QuestionId: '0x129', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x146', QuestionId: '0x12a', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x14e', QuestionId: '0x12b', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x156', QuestionId: '0x12c', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x166', QuestionId: '0x12d', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x16e', QuestionId: '0x12e', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x176', QuestionId: '0x12f', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x15e', QuestionId: '0x130', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x17e', QuestionId: '0x131', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x126' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x186', QuestionId: '0x132', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x18e', QuestionId: '0x133', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0305' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 6' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 6' [ VarStore: '0x127', QuestionId: '0x134', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x134' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x12f', QuestionId: '0x135', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' URR' [ VarStore: '0x137', QuestionId: '0x136', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' FER' [ VarStore: '0x13f', QuestionId: '0x137', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x147', QuestionId: '0x138', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x14f', QuestionId: '0x139', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x157', QuestionId: '0x13a', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x167', QuestionId: '0x13b', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x16f', QuestionId: '0x13c', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x177', QuestionId: '0x13d', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x15f', QuestionId: '0x13e', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x17f', QuestionId: '0x13f', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x134' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x187', QuestionId: '0x140', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x18f', QuestionId: '0x141', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0306' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 7' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 7' [ VarStore: '0x128', QuestionId: '0x142', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x142' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x130', QuestionId: '0x143', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' URR' [ VarStore: '0x138', QuestionId: '0x144', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' FER' [ VarStore: '0x140', QuestionId: '0x145', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x148', QuestionId: '0x146', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x150', QuestionId: '0x147', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x158', QuestionId: '0x148', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x168', QuestionId: '0x149', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x170', QuestionId: '0x14a', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x178', QuestionId: '0x14b', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x160', QuestionId: '0x14c', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x180', QuestionId: '0x14d', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x142' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x188', QuestionId: '0x14e', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x190', QuestionId: '0x14f', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0307' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'PCI Express Root Port 8' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Express Root Port 8' [ VarStore: '0x129', QuestionId: '0x150', Help: 'Control the PCI Express Root Port.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x150' ] == 0x00 | Select option: 'Automatic ASPM' [ VarStore: '0x131', QuestionId: '0x151', Help: 'Automatically enable ASPM based on reported capabilities and known issues'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'L0s' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'L1' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: 'L0sL1' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Auto' [ Value: '4' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: ' URR' [ VarStore: '0x139', QuestionId: '0x152', Help: 'PCI Express Unsupported Request Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' FER' [ VarStore: '0x141', QuestionId: '0x153', Help: 'PCI Express Device Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' NFER' [ VarStore: '0x149', QuestionId: '0x154', Help: 'PCI Express Device Non-Fatal Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CER' [ VarStore: '0x151', QuestionId: '0x155', Help: 'PCI Express Device Correctable Error Reporting Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' CTO' [ VarStore: '0x159', QuestionId: '0x156', Help: 'PCI Express Completion Timer TO Enable/Disable'] Option: 'Default' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '16-55 ms' [ Value: '3' Default: 'false' Type: 'int8' ] Option: '65-210 ms' [ Value: '4' Default: 'false' Type: 'int8' ] Option: '260-900 ms' [ Value: '5' Default: 'false' Type: 'int8' ] Option: '1-3.5 ms' [ Value: '6' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '9' Default: 'false' Type: 'int8' ] Select option: ' SEFE' [ VarStore: '0x169', QuestionId: '0x157', Help: 'Root PCI Express System Error on Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SENFE' [ VarStore: '0x171', QuestionId: '0x158', Help: 'Root PCI Express System Error on Non-Fatal Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' SECE' [ VarStore: '0x179', QuestionId: '0x159', Help: 'Root PCI Express System Error on Correctable Error Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME Interrupt' [ VarStore: '0x161', QuestionId: '0x15a', Help: 'Root PCI Express PME Interrupt Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: ' PME SCI' [ VarStore: '0x181', QuestionId: '0x15b', Help: 'PCI Express PME SCI Enable/Disable.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x150' ] == 0x00 | Select option: ' Hot Plug' [ VarStore: '0x189', QuestionId: '0x15c', Help: 'PCI Express Hot Plug Enable/Disable.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; Select option: ' PCIe Speed' [ VarStore: '0x191', QuestionId: '0x15d', Help: 'Configure PCIe Speed'] Option: 'Auto' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Gen1' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Gen2' [ Value: '2' Default: 'false' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1cc0' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Extended ICC' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Use WatchDog Timer For ICC' [ VarStore: '0x312', QuestionId: '0x15e', Help: 'Enable Watchdog Timer operation for ICC. If enabled, Watchdog Timer will be started after ICC-related changes. This timer detects platform instability caused by wrong clock settings.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enable' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Turn Off Unused PCI/PCIe Clocks'[ VarStore: '0x313', QuestionId: '0x15f', Help: 'Disable: all clocks turned on. Enable: clocks for empty PCI/PCIe slots will be turned off to save power. Platform must be powered off for changes to take effect.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Lock ICC Registers' [ VarStore: '0x314', QuestionId: '0x160', Help: 'All registers: all ICC registers will be locked. Static only: only static ICC registers will be locked.'] Option: 'All registers' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Static registers only' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x162' ] == 0x00 | └- END IF Suppress; ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Libary disabled after End Of PosDefault: '' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: ' ICC Overclocking Lib' Default: 'UnKnow' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x161' ] == 0x00 | Reference: 'Clock_DIV-1S' [ FormID: '0x1cc1', QuestionId: '0x1cc1', VarStore: '0xffff' ] | Reference: 'Clock_DIV-2S' [ FormID: '0x1cc2', QuestionId: '0x1cc2', VarStore: '0xffff' ] | Reference: 'Clock_DIV-3' [ FormID: '0x1cc3', QuestionId: '0x1cc3', VarStore: '0xffff' ] | Reference: 'Clock_DIV-4' [ FormID: '0x1cc4', QuestionId: '0x1cc4', VarStore: '0xffff' ] | Reference: 'Clock_DIV-1NS' [ FormID: '0x1cc5', QuestionId: '0x1cc5', VarStore: '0xffff' ] | Reference: 'Clock_DIV-2NS' [ FormID: '0x1cc6', QuestionId: '0x1cc6', VarStore: '0xffff' ] └- END IF Grayout; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1cc1' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1cc2' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1cc3' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1cc4' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1cc5' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1cc6' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x3610' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'DPTF Configuration' ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'DPTF' [ VarStore: '0x333', QuestionId: '0x3610', Help: 'Enable / Disable DPTF'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3610' ] == 0x00 | Select option: 'LPM' [ VarStore: '0x336', QuestionId: '0x163', Help: 'Enable / Disable LPM'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3610' ] == 0x00 | Question [ ID: '0x163' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'CLPM' [ VarStore: '0x337', QuestionId: '0x164', Help: 'Select Current Low Power Mode'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Application Specific LPM' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'Use the LPM setting as requested by t[ Value: '3' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3610' ] == 0x00 | Question [ ID: '0x168' ] == 0x00 | OR expression └- END IF Suppress; Select option: 'cTDP' [ VarStore: '0x338', QuestionId: '0x165', Help: 'Enable / Disable cTDP'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3610' ] == 0x00 | Select option: 'Processor Thermal Device' [ VarStore: '0x334', QuestionId: '0x166', Help: 'Configure Processor Thermal Device'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'SA Thermal Device' [ Value: '1' Default: 'true' Type: 'int8' ] | Option: 'CPU Thermal Device' [ Value: '2' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x3610' ] == 0x00 | Select option: 'PCH Thermal Device' [ VarStore: '0x335', QuestionId: '0x167', Help: 'Configure PCH Thermal Device'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1e00' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Intel(R) Smart Connect Technology Configuration' Select option: 'ISCT Configuration' [ VarStore: '0x32e', QuestionId: '0x950', Help: 'Enable/Disable Intel(R) Smart Connect Technology Configuration. '] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x950' ] == 0x00 | Select option: 'ISCT Notification Control' [ VarStore: '0x32f', QuestionId: '0x169', Help: 'Enable/Disable Intel(R) Smart Connect Technology Notification Control. '] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x950' ] == 0x00 | Select option: 'ISCT WLAN Power Control' [ VarStore: '0x330', QuestionId: '0x16a', Help: 'Enable/Disable Intel(R) Smart Connect Technology WLAN Power Control. '] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x950' ] == 0x00 | Select option: 'ISCT WWLAN Power Control' [ VarStore: '0x331', QuestionId: '0x16b', Help: 'Enable/Disable Intel(R) Smart Connect Technology WWLAN Power Control. '] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0e' ] == 0x02 | Question [ ID: '0x0d' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x950' ] == 0x00 | Select option: 'AOAC Wake Up from EC Control' [ VarStore: '0x332', QuestionId: '0x16c', Help: 'Enable/Disable AOAC Wake up from EC/RTC. '] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] └- END IF Suppress; ╔════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╗ ║ FormSet: 'Power' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╟────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╢ ║ VarStore Id: '0x1234', Size: '900', Name: 'SystemConfig' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╚════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╝ ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'Power' [ ID: '0x0001' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Reference: 'Advanced CPU Control' [ FormID: '0x0040', QuestionId: '0x01', VarStore: '0xffff' ] Reference: 'Platform Power Management' [ FormID: '0x0041', QuestionId: '0x02', VarStore: '0xffff' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Wake on PME' [ VarStore: '0x86', QuestionId: '0x402', Help: 'Determines the action taken when the system power is off and a PCI Power Management Enable wake up event occurs.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Wake on Modem Ring' [ VarStore: '0x87', QuestionId: '0x03', Help: 'Determines the action taken when the system power is off and a modem connected to the serial port is ringing.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: 'Auto Wake on S5' [ VarStore: '0x88', QuestionId: '0x04', Help: 'Auto wake on S5, By Day of Month or Fixed time of every day'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'By Every Day' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'By Day of Month' [ Value: '2' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x04' ] == 0x00 | Time: ' Wake on S5 Time' [ QuestionId: '0x05', VarStore: '0x89', Help: 'This is the help of the [Hour:Minute:Second] field. Hour valid range is from 0 to 23, Minute is from 0 to 59, Second is from 0 to 59. INCREASE/REDUCE : F6/F5.' ] | Default value: '00:00:00', Type: 0x05 └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x04' ] in ('0x00','0x01') | Number question: Prompt: Day of Month, Help: This is the help for the day field. Valid range is from 1 to 31. (Error checking will be done against month/day/year combinations that are not supported. REDUCE/INCREASE : F5/F6. | └- [ QuestionId: '0x06', VarStore: '0x8c' , Type: '10', MinValue: '1', MaxValue: '31', Step: '1' ] | Default value: '1', Type: 0x00 └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x0b' ] == 0x00 | Select option: 'Wake on LAN' [ VarStore: '0x1f1', QuestionId: '0x07', Help: 'ENABLE/DISABLED integrated LAN to wake the system.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'S5 long run test' [ VarStore: '0x369', QuestionId: '0x08', Help: 'Enable : force to enable RTC S5 wake up, even if OS disables it. Support ipwrtest to do RTC S5 wakeup.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0040' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Advanced CPU Control' ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x30' ] == 0x00 | Select option: 'AES' [ VarStore: '0x1f4', QuestionId: '0x0c', Help: 'AES(Advanced Encryption Standards).'] | Option: 'Enable' [ Value: '1' Default: 'true' Type: 'int8' ] | Option: 'Disable' [ Value: '0' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'P-States(IST)' [ VarStore: '0x1bf', QuestionId: '0x0d', Help: 'Enable processor performance states(P-States).'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Boot Performance Mode' [ VarStore: '0x1c0', QuestionId: '0xcf9', Help: 'Select the performance state that BIOS will set before OS handoff.'] Option: 'Max Battery' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Max Performance' [ Value: '0' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Active Processor Cores' [ VarStore: '0x1c1', QuestionId: '0xa09', Help: 'Number of Cores to enable in each processor package'] Option: 'All Core' [ Value: '0' Default: 'true' Type: 'int8' ] Option: '1 Core' [ Value: '1' Default: 'false' Type: 'int8' ] Option: '2 Core' [ Value: '2' Default: 'false' Type: 'int8' ] Option: '3 Core' [ Value: '3' Default: 'false' Type: 'int8' ] Select option: 'HT Support' [ VarStore: '0x1c2', QuestionId: '0x0e', Help: 'Auto/Disable Hyper-Threading'] Option: 'Auto' [ Value: '1' Default: 'true' Type: 'int8' ] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Use XD Capability' [ VarStore: '0x1c3', QuestionId: '0x0f', Help: 'XD is a CPU feature for prevent malicious buffer overflow attacks (a supporting OS is necessary)'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'VT Support' [ VarStore: '0x1c4', QuestionId: '0x2064', Help: 'Virtualization Technology Enable/Disable.'] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Hardware Prefetcher' [ VarStore: '0x1c5', QuestionId: '0x10', Help: 'Enable/Disable MLC (Mid Level Cache, L2 Cache) Streamer Prefetcher.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'AdjacentCacheLine Prefet' [ VarStore: '0x1c6', QuestionId: '0x11', Help: 'Enable/Disable MLC Spatail Prefetcher. (Adjacent Cache Line Prefetch)'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'Max CPUID Value Limit' [ VarStore: '0x1c7', QuestionId: '0x12', Help: 'Limit CPUID max value to 3 (if max CPUID value > 3). This setting is useless for windows OS.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | EQ == TRUE | Select option: 'xAPIC Mode' [ VarStore: '0x1d0', QuestionId: '0x13', Help: 'Enable / Disable xAPIC Mode'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x14' ] in ('0x00','0x01') | Select option: 'Local x2APIC' [ VarStore: '0x1c8', QuestionId: '0x14', Help: 'Enable/Disable Local x2APIC. Some OS do not support this feature.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'C-States' [ VarStore: '0x1d1', QuestionId: '0x15', Help: 'Enable processor idle power saving states(C-States).'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x15' ] == 0x00 | Select option: 'Enhanced C-States' [ VarStore: '0x1d2', QuestionId: '0x16', Help: 'Enable P-State transitions to occur in combination with C-States.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: 'Enable C3' [ VarStore: '0x1d3', QuestionId: '0x17', Help: 'Enable / Disable C3'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Enable C6' [ VarStore: '0x1d4', QuestionId: '0x18', Help: 'Enable C6'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Enable C7' [ VarStore: '0x1d5', QuestionId: '0x19', Help: 'Enable / Disable C7'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] Select option: 'Enable C7s' [ VarStore: '0x342', QuestionId: '0x1a', Help: 'Enable / Disable C7s state. If enabled, BIOS will reports C7s instead of C7 to OS.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: 'Enable C7r' [ VarStore: '0x341', QuestionId: '0x1b', Help: 'Enable / Disable C7r state'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: 'C-State Auto Demotion' [ VarStore: '0x1d6', QuestionId: '0x1c', Help: 'Enable / Disable C-State Auto Demotion'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'C1 only' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'C3 only' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'C1 and C3' [ Value: '3' Default: 'true' Type: 'int8' ] Select option: 'C-State Auto Un-demotion' [ VarStore: '0x205', QuestionId: '0x1d', Help: 'Enable / Disable C-State Auto Un-demotion'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'C1 Only' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'C3 Only' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'C1 and C3' [ Value: '3' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'EC Turbo Control Mode' [ VarStore: '0x1f9', QuestionId: '0x1e', Help: 'Enable/Disable EC Turbo Control Mode'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x1e' ] == 0x00 | Select option: 'AC Brick Capacity' [ VarStore: '0x1fa', QuestionId: '0x1f', Help: 'Specify the AC Brick capacity'] | Option: '90W AC Brick' [ Value: '1' Default: 'true' Type: 'int8' ] | Option: '65W AC Brick' [ Value: '2' Default: 'false' Type: 'int8' ] | Option: '75W AC Brick' [ Value: '3' Default: 'false' Type: 'int8' ] └- END IF Suppress; Number question: Prompt: EC Polling Period, Help: Count 1 to 255 for a range of 10ms to 2.55 seconds (1 count = 10ms) └- [ QuestionId: '0x20', VarStore: '0x1fb' , Type: '10', MinValue: '1', MaxValue: '255', Step: '1' ] Default value: '1', Type: 0x00 Number question: Prompt: EC Guard Band Value, Help: Count 1 to 20 for a range of 1 watt to 20 watts └- [ QuestionId: '0x21', VarStore: '0x1fc' , Type: '10', MinValue: '0', MaxValue: '20', Step: '1' ] Default value: '0', Type: 0x00 Number question: Prompt: EC Alogrithm Selection, Help: Count 1 to 10 for Algorithm Selection └- [ QuestionId: '0x22', VarStore: '0x1fd' , Type: '10', MinValue: '1', MaxValue: '10', Step: '1' ] Default value: '1', Type: 0x00 ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2f' ] == 0x00 | Select option: 'Turbo Mode' [ VarStore: '0x1c9', QuestionId: '0x23', Help: 'Enable processor Turbo Mode(requires EMTTM enabled too).'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x23' ] == 0x00 | Select option: 'Energy Efficient P-state' [ VarStore: '0x2bc', QuestionId: '0x24', Help: 'Enable/Disable Energy Efficient P-state feature.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: 'Turbo PWR Limit MSR Lock' [ VarStore: '0x2bd', QuestionId: '0x25', Help: 'Enable/Disable locking of turbo settings.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x23' ] == 0x00 | Question [ ID: '0x2e' ] == 0x01 | OR expression └- END IF Suppress; Select option: 'Override Turbo Settings' [ VarStore: '0x2be', QuestionId: '0x26', Help: 'Enable/disable Override of various turbo settings.'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x23' ] == 0x00 | Question [ ID: '0x26' ] == 0x00 | OR expression | Question [ ID: '0x2e' ] == 0x01 | OR expression └- END IF Suppress; Number question: Prompt: Long Duration PWR Limit, Help: Turbo Mode Power Limit 1 in Watts. The value may vary from 0 to Fused Value. Value 0 will programmed to fused value. Greater than fused TDP value will not be programmed. └- [ QuestionId: '0x27', VarStore: '0x2bf' , Type: '11', MinValue: '0', MaxValue: '0', Step: '99' ] Default value: '0', Type: 0x01 Number question: Prompt: Long Duration TimeWindow, Help: Power Limit 1 Time value in seconds. Indicates the time window over which TDP value should be maintained. Value 0 will programmed to fused value. └- [ QuestionId: '0x28', VarStore: '0x2c1' , Type: '11', MinValue: '0', MaxValue: '0', Step: '56' ] Default value: '28', Type: 0x01 Select option: 'Short Duration PWR Limit' [ VarStore: '0x2c3', QuestionId: '0x29', Help: 'Enable/Disable Short Duration Power Limit (Power Limit 2)'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x23' ] == 0x00 | Question [ ID: '0x26' ] == 0x00 | OR expression | Question [ ID: '0x29' ] == 0x00 | OR expression | Question [ ID: '0x2e' ] == 0x01 | OR expression └- END IF Suppress; Number question: Prompt: Short Duration PWR Limit, Help: Turbo Mode Power Limit 2 value in Watts. Value 0 will programmed to 1.25*TDP. └- [ QuestionId: '0x2a', VarStore: '0x2c4' , Type: '11', MinValue: '0', MaxValue: '0', Step: '99' ] Default value: '0', Type: 0x01 ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x23' ] == 0x00 | Number question: Prompt: Pri Plane Current Limit, Help: Primary Plane refers to the IA Core power rail. This value represents the Maximum instantaneous current allowed at any given time. The value is represented in 1/8 A increments. 0 means AUTO. | └- [ QuestionId: '0x2b', VarStore: '0x2c6' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] | Default value: '0', Type: 0x01 └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x23' ] == 0x00 | Number question: Prompt: Sec Plane Current Limit, Help: Secondary Plane refers to the Integrated Graphics power rail. This value represents the Maximum instantaneous current allowed at any given time. The value is represented in 1/8 A increments. 0 means AUTO. | └- [ QuestionId: '0x2c', VarStore: '0x2c8' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] | Default value: '0', Type: 0x01 └- END IF Suppress; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Reference: 'Config TDP Configurations' [ FormID: '0x0042', QuestionId: '0x2d', VarStore: '0xffff' ] └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0041' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Platform Power Management' ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; Select option: 'PCI Clock Run' [ VarStore: '0x1f2', QuestionId: '0x31', Help: 'If Enabled,the CLKRUN# Logic will stop the PCI Clocks'] Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0042' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Config TDP Configurations' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Max Turbo Power Limit' Default: '0.0' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Min Turbo Power Limit' Default: '0.0' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Additional ConfigTDP Levels' Default: '0' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'ConfigTDP Nominal' Default: 'Unknown' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'ConfigTDP Level1' Default: 'Unknown' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'ConfigTDP Level2' Default: 'Unknown' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'ConfigTDP Config TDP Control' Default: 'Unknown' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'ConfigTDP Turbo Activation RatioDefault: 'Unknown' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Long Term Power Limit (PL1)' Default: 'Unknown' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Short Term Power Limit (PL2)' Default: 'Unknown' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression | Question [ ID: '0x34' ] == 0x01 | OR expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Select option: 'Configurable TDP BOOT Mode' [ VarStore: '0x346', QuestionId: '0x32', Help: 'Configure TDP Mode as Nominal / Up / Down'] | Option: 'Nominal' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Up' [ Value: '2' Default: 'true' Type: 'int8' ] | Option: 'Down' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Select option: 'Configurable TDP Lock' [ VarStore: '0x34c', QuestionId: '0x33', Help: 'Configure TDP Mode Lock sets the Lock bits on TURBO_ACTIVATION_RATIO and CONFIG_TDP_CONTROL.'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Select option: 'Custom Configurable TDP' [ VarStore: '0x34d', QuestionId: '0x34', Help: 'Custom Configurable TDP Settings'] | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Reference: 'Custom Configurable TDP Setting' [ FormID: '0x0043', QuestionId: '0x35', VarStore: '0xffff' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0043' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Custom Configurable TDP Setting' ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Number question: Prompt: Custom ConfigTDP Count, Help: Configure the number of custom ConfigTDP levels required. Note: this must be 1 if Configurable TDP Lock is enabled. └- [ QuestionId: '0x36', VarStore: '0x34e' , Type: '10', MinValue: '1', MaxValue: '3', Step: '1' ] Default value: '1', Type: 0x00 ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Number question: Prompt: Custom ConfigTDP Boot Index, Help: Configure the Index value of Custom ConfigTDP selected by default for boot. Needs to be configured with valid values from 0 to Max Custom ConfigTdp count. Note: this must be 0 if Configurable TDP Lock is enabled. └- [ QuestionId: '0x37', VarStore: '0x34f' , Type: '10', MinValue: '0', MaxValue: '2', Step: '1' ] Default value: '0', Type: 0x00 Subtitle: ' Custom Setting 0' ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Number question: Prompt: Long Term Power Limit, Help: Long Term Power Limit (aka Power Limit 1) value in Watts. XE SKU: any value can be programmed. Overclocking SKU: Value must be between Max and Min Power Limits. Other SKUs: This Value must be between Min Power Limit and TDP Limit. If Value is 0, BIOS will program TDP value. └- [ QuestionId: '0x38', VarStore: '0x350' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] Default value: '40', Type: 0x01 ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Number question: Prompt: Short Term Power Limit, Help: Short Term Power Limit (aka Power Limit 2) value in Watts. If the value is 0, BIOS will program this value as 1.25*TDP. Processor applies control policies such that the package power does not exceed this limit └- [ QuestionId: '0x39', VarStore: '0x352' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] Default value: '50', Type: 0x01 ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Number question: Prompt: Long Term Time Window, Help: Long Term Time Window (aka Power Limit 1 Time) value in seconds. The value may vary from 0 to 128. If the value is 0, default values will be programmed (28 sec for Mobile and 1 sec from Desktop). Indicates the time window over which TDP value should be maintained. └- [ QuestionId: '0x3a', VarStore: '0x354' , Type: '10', MinValue: '0', MaxValue: '128', Step: '1' ] Default value: '28', Type: 0x00 ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Number question: Prompt: ConfigTDP Turbo Activation Ratio, Help: Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo. └- [ QuestionId: '0x3b', VarStore: '0x355' , Type: '10', MinValue: '0', MaxValue: '255', Step: '1' ] Default value: '20', Type: 0x00 ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x02 | Question [ ID: '0x09' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x2e' ] == 0x00 | Question [ ID: '0x34' ] == 0x00 | OR expression └- END IF Suppress; Number question: Prompt: ConfigTDP Config TDP Control, Help: Custom value for Config TDP Control. Needs to be configured with valid values from 0 to 2. └- [ QuestionId: '0x3c', VarStore: '0x356' , Type: '10', MinValue: '0', MaxValue: '2', Step: '1' ] Default value: '0', Type: 0x00 Subtitle: ' Custom Setting 1' ┌- Grayout IF: | Question [ ID: '0x36' ] == 0x01 | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: Long Term Power Limit, Help: Long Term Power Limit (aka Power Limit 1) value in Watts. XE SKU: any value can be programmed. Overclocking SKU: Value must be between Max and Min Power Limits. Other SKUs: This Value must be between Min Power Limit and TDP Limit. If Value is 0, BIOS will program TDP value. | └- [ QuestionId: '0x3d', VarStore: '0x357' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] | Default value: '40', Type: 0x01 └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x36' ] == 0x01 | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: Short Term Power Limit, Help: Short Term Power Limit (aka Power Limit 2) value in Watts. If the value is 0, BIOS will program this value as 1.25*TDP. Processor applies control policies such that the package power does not exceed this limit | └- [ QuestionId: '0x3e', VarStore: '0x359' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] | Default value: '50', Type: 0x01 └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x36' ] == 0x01 | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: Long Term Time Window, Help: Long Term Time Window (aka Power Limit 1 Time) value in seconds. The value may vary from 0 to 128. If the value is 0, default values will be programmed (28 sec for Mobile and 1 sec from Desktop). Indicates the time window over which TDP value should be maintained. | └- [ QuestionId: '0x3f', VarStore: '0x35b' , Type: '10', MinValue: '0', MaxValue: '128', Step: '1' ] | Default value: '28', Type: 0x00 └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x36' ] == 0x01 | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: ConfigTDP Turbo Activation Ratio, Help: Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo. | └- [ QuestionId: '0x40', VarStore: '0x35c' , Type: '10', MinValue: '0', MaxValue: '255', Step: '1' ] | Default value: '22', Type: 0x00 └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x36' ] == 0x01 | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: ConfigTDP Config TDP Control, Help: Custom value for Config TDP Control. Needs to be configured with valid values from 0 to 2. | └- [ QuestionId: '0x41', VarStore: '0x35d' , Type: '10', MinValue: '0', MaxValue: '2', Step: '1' ] | Default value: '1', Type: 0x00 └- END IF Grayout; Subtitle: ' Custom Setting 2' ┌- Grayout IF: | LIST [ ID: '0x36' ] in ('0x01','0x02') | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: Long Term Power Limit, Help: Long Term Power Limit (aka Power Limit 1) value in Watts. XE SKU: any value can be programmed. Overclocking SKU: Value must be between Max and Min Power Limits. Other SKUs: This Value must be between Min Power Limit and TDP Limit. If Value is 0, BIOS will program TDP value. | └- [ QuestionId: '0x42', VarStore: '0x35e' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] | Default value: '40', Type: 0x01 └- END IF Grayout; ┌- Grayout IF: | LIST [ ID: '0x36' ] in ('0x01','0x02') | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: Short Term Power Limit, Help: Short Term Power Limit (aka Power Limit 2) value in Watts. If the value is 0, BIOS will program this value as 1.25*TDP. Processor applies control policies such that the package power does not exceed this limit | └- [ QuestionId: '0x43', VarStore: '0x360' , Type: '11', MinValue: '0', MaxValue: '0', Step: '255' ] | Default value: '50', Type: 0x01 └- END IF Grayout; ┌- Grayout IF: | LIST [ ID: '0x36' ] in ('0x01','0x02') | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: Long Term Time Window, Help: Long Term Time Window (aka Power Limit 1 Time) value in seconds. The value may vary from 0 to 128. If the value is 0, default values will be programmed (28 sec for Mobile and 1 sec from Desktop). Indicates the time window over which TDP value should be maintained. | └- [ QuestionId: '0x44', VarStore: '0x362' , Type: '10', MinValue: '0', MaxValue: '128', Step: '1' ] | Default value: '28', Type: 0x00 └- END IF Grayout; ┌- Grayout IF: | LIST [ ID: '0x36' ] in ('0x01','0x02') | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: ConfigTDP Turbo Activation Ratio, Help: Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo. | └- [ QuestionId: '0x45', VarStore: '0x363' , Type: '10', MinValue: '0', MaxValue: '255', Step: '1' ] | Default value: '25', Type: 0x00 └- END IF Grayout; ┌- Grayout IF: | LIST [ ID: '0x36' ] in ('0x01','0x02') | ┌- Suppress IF: | | Question [ ID: '0x2e' ] == 0x00 | | Question [ ID: '0x34' ] == 0x00 | | OR expression | └- END IF Suppress; | Number question: Prompt: ConfigTDP Config TDP Control, Help: Custom value for Config TDP Control. Needs to be configured with valid values from 0 to 2. | └- [ QuestionId: '0x46', VarStore: '0x364' , Type: '10', MinValue: '0', MaxValue: '2', Step: '1' ] | Default value: '2', Type: 0x00 └- END IF Grayout; ╔════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╗ ║ FormSet: 'Main' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╟────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╢ ║ VarStore Id: '0x1234', Size: '900', Name: 'SystemConfig' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╚════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╝ ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'Main' [ ID: '0x0001' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Suppress IF: | EQ == TRUE | ┌- Grayout IF: | | VALUE = 1 | | VALUE = 1 | | EQUAL expression | └- END IF Grayout; | Text: 'InsydeH2O Version' Default: 'Fake Data' Help: ' ' └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | ┌- Grayout IF: | | VALUE = 1 | | VALUE = 1 | | EQUAL expression | └- END IF Grayout; | | | | Text: 'System Memory Speed' Default: '[Not Detected]' Help: ' ' └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | ┌- Grayout IF: | | VALUE = 1 | | VALUE = 1 | | EQUAL expression | └- END IF Grayout; | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | ┌- Grayout IF: | | VALUE = 1 | | VALUE = 1 | | EQUAL expression | └- END IF Grayout; | Text: 'Total Memory:' Default: '[Not Detected]' Help: ' ' | | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; Time: 'System Time' [ QuestionId: '0x01', VarStore: '0xffff', Help: 'This is the help of the [Hour:Minute:Second] field. Hour valid range is from 0 to 23, Minute is from 0 to 59, Second is from 0 to 59. INCREASE/REDUCE : F6/F5.' ] Default value: '00:00:00', Type: 0x05 Date: 'System Date' [ QuestionId: '0x02', VarStore: '0xffff', Help: 'This is the help of the [Month/Day/Year] field. Month valid range is from 1 to 12, Day is from 1 to 31, Year is from 2000 to 2099. (Error checking will be done against month/day/year combinations that are not supported.) INCREASE/REDUCE : F6/F5.' ] Default value: '2011/05/01', Type: 0x06 ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Total Memory:' Default: '[Not Detected]' Help: ' ' ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Video Memory:' Default: '64MB' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x01 | Question [ ID: '0x0b' ] == 0x02 | AND expression └- END IF Grayout; ┌- Suppress IF: | EQ == TRUE | Select option: 'Graphic mode' [ VarStore: '0x192', QuestionId: '0xa03', Help: 'Graphic mode'] | Option: 'Integrated' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Switchable' [ Value: '4' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x01 | Question [ ID: '0x0b' ] == 0x02 | AND expression └- END IF Grayout; ┌- Suppress IF: | Question [ ID: '0x0e' ] == 0x02 | Select option: 'Quiet Boot' [ VarStore: '0x6e', QuestionId: '0x03', Help: 'Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled.'] | Option: 'Disabled' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Enabled' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; Select option: 'Network Boot' [ VarStore: '0x6f', QuestionId: '0x04', Help: 'Disables or enables PXE boot to LAN.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: 'F12 Boot Menu' [ VarStore: '0x213', QuestionId: '0x05', Help: 'User could choose if to display 'Press to display Boot Menu' during POST.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] Select option: 'D2D Recovery' [ VarStore: '0x212', QuestionId: '0x06', Help: 'Disable or enable D2D Recovery.'] Option: 'Disabled' [ Value: '1' Default: 'false' Type: 'int8' ] Option: 'Enabled' [ Value: '0' Default: 'true' Type: 'int8' ] Select option: 'Wake on LAN' [ VarStore: '0x222', QuestionId: '0xa010', Help: 'Disable or enable Wake on LAN.'] Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x0b' ] == 0x02 | Question [ ID: '0x0a' ] == 0x01 | AND expression | Question [ ID: '0x0d' ] == 0x00 | OR expression └- END IF Grayout; Select option: 'SATA Mode' [ VarStore: '0x39', QuestionId: '0x07', Help: 'Set Harddisk Controller Configure Type'] Option: 'IDE Mode' [ Value: '0' Default: 'false' Type: 'int8' ] Option: 'AHCI Mode' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Suppress IF: | LIST [ ID: '0x0c' ] in ('0x00','0x01') | ┌- Grayout IF: | | Question [ ID: '0x0b' ] == 0x02 | | Question [ ID: '0x0a' ] == 0x01 | | AND expression | └- END IF Grayout; | Select option: 'Function Key Behavior' [ VarStore: '0x215', QuestionId: '0x08', Help: 'Special keys: Function keys perform the special function by default. Hold the key to activate F1 to F12. Function keys: Function keys activate F1 to F12 by default. Hold the key to perform special functions. Note: Special functions are only active in Windows. F1 to F12 act as normal function keys during device boot or while in BIOS.'] | Option: 'Function Keys' [ Value: '0' Default: 'false' Type: 'int8' ] | Option: 'Special Keys' [ Value: '1' Default: 'true' Type: 'int8' ] └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | Action: 'About this Software' [ QuestionId: '0x1059', VarStore: '0xffff', Help: ] └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | ┌- Suppress IF: | | LIST [ ID: '0x0a' ] in ('0x00','0x01') | | Select option: 'Debug Reclaim' [ VarStore: '0x1d7', QuestionId: '0x09', Help: ' '] | | Option: 'Enabled' [ Value: '1' Default: 'false' Type: 'int8' ] | | Option: 'Disabled' [ Value: '0' Default: 'true' Type: 'int8' ] | └- END IF Suppress; └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x0101' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'System Diagnose' Action: 'Hdd Test' [ QuestionId: '0x109a', VarStore: '0xffff', Help: Acer Hdd Test Tool ] Action: 'Memory Test' [ QuestionId: '0x1099', VarStore: '0xffff', Help: Acer Memory Test Tool ] Reference: 'Log' [ FormID: '0x1011', QuestionId: '0x0f', VarStore: '0xffff' ] ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0x1011' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Subtitle: 'Log' Text: 'Hdd Test:' Default: 'No Previous Test Result.' Help: ' ' Text: 'Memory Test:' Default: 'No Previous Test Result.' Help: ' ' ╔════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╗ ║ FormSet: 'Security' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╟────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╢ ║ VarStore Id: '0x1234', Size: '900', Name: 'SystemConfig' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╚════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╝ ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'Security' [ ID: '0x0001' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌- Grayout IF: | VALUE = 1 | VALUE = 1 | EQUAL expression └- END IF Grayout; Text: 'Supervisor Password Is:' Default: 'Clear' Help: ' ' Text: 'User Password Is:' Default: 'Clear' Help: ' ' ┌- Suppress IF: | LIST [ ID: '0x01' ] in ('0x01','0x03','0x04') | Question [ ID: '0x06' ] == 0x00 | OR expression └- END IF Suppress; Text: ' ' Default: ' ' Help: ' ' ┌- Grayout IF: | Question [ ID: '0x01' ] == 0x02 | Question [ ID: '0x06' ] == 0x01 | AND expression └- END IF Grayout; ┌- Suppress IF: | LIST [ ID: '0x01' ] in ('0x03','0x04') | Question [ ID: '0x06' ] == 0x01 | AND expression └- END IF Suppress; Password: Set Supervisor Password [ VarStore: '0x9f', Help: 'Install or Change the password and the length of password must be greater or equal one word.'] ┌- Suppress IF: | EQ == TRUE | Select option: 'User Access Level' [ VarStore: '0x80', QuestionId: '0x01', Help: 'Limited:Only limited fields can be changed. No Access:Prevent User access to InsydeH2O Setup.View Only:Access to InsydeH2O Setup allowed but the fields cannot be changed.Full:Any field can be changed except the Supervisor password.'] | Option: 'View Only' [ Value: '2' Default: 'true' Type: 'int8' ] | Option: 'Limited' [ Value: '3' Default: 'false' Type: 'int8' ] | Option: 'Full' [ Value: '4' Default: 'false' Type: 'int8' ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x05' ] == 0x00 | Password: Set User Password [ VarStore: '0xa3', Help: 'Install or Change the password and the length of password must be greater or equal one word.'] └- END IF Grayout; ┌- Suppress IF: | EQ == TRUE | Action: 'Clear User Password' [ QuestionId: '0x1039', VarStore: '0xffff', Help: ] └- END IF Suppress; ┌- Grayout IF: | Question [ ID: '0x0a' ] == 0x01 | └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x09' ] == 0x01 | └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x08' ] == 0x01 | └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x07' ] == 0x01 | └- END IF Grayout; ┌- Grayout IF: | Question [ ID: '0x06' ] == 0x01 | Question [ ID: '0x05' ] == 0x00 | OR expression └- END IF Grayout; Select option: 'Password on Boot:' [ VarStore: '0xa1', QuestionId: '0x02', Help: 'Enable:System will ask input password on post time. Disable:System will ask input password when go to Setup Utility'] Option: 'Enabled' [ Value: '2' Default: 'false' Type: 'int8' ] Option: 'Disabled' [ Value: '1' Default: 'true' Type: 'int8' ] ┌- Grayout IF: | Question [ ID: '0x06' ] == 0x01 | Question [ ID: '0x05' ] == 0x00 | OR expression | Question [ ID: '0x04' ] == 0x01 | OR expression | Question [ ID: '0x03' ] == 0x00 | OR expression └- END IF Grayout; Text: 'Secure Boot Mode' Default: ' ' Help: 'Select Secure Boot Mode' Action: 'Erase all Secure Boot [ QuestionId: '0xae2a', VarStore: '0xffff', Help: Erase all content in secure four variables PK, KEK, db, and dbx ] Reference: 'Select an UEFI file as [Enter] trusted for executing' [ FormID: '0xae22', QuestionId: '0xae21', VarStore: '0xffff' ] Action: 'Restore Secure Boot to [ QuestionId: '0xae2b', VarStore: '0xffff', Help: Restore setting back to factory settings ] ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌- Suppress IF: | EQ == TRUE | └- END IF Suppress; ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Form Name: 'InsydeH2O Setup Utility' [ ID: '0xae22' ]│ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ╔════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╗ ║ FormSet: 'Boot' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╟────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╢ ║ VarStore Id: '0x1234', Size: '900', Name: 'SystemConfig' GUID: a04a27f4-df00-4d42-b552-39511302113d ║ ╚════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╝ --> UNKNOWN OPCODE: 26, length: 24