[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.39-rc5-ch-broken+ (root@c3po) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #1 SMP Wed May 4 08:30:38 CEST 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.39-rc5-ch-broken+ root=/dev/mapper/vg-root ro quiet splash vt.handoff=7 initcall_debug debug loglevel=7 acpi=off [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096800 (usable) [ 0.000000] BIOS-e820: 0000000000096800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable) [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/M4A89GTD-PRO/USB3, BIOS 2001 03/08/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfe90000 page 4k [ 0.000000] kernel direct mapping tables up to cfe90000 @ cfe8d000-cfe90000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0220000000 page 2M [ 0.000000] kernel direct mapping tables up to 220000000 @ 21fffe000-220000000 [ 0.000000] RAMDISK: 36b5a000 - 375a5000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000220000000 [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000 [ 0.000000] NODE_DATA [000000021fff9000 - 000000021fffdfff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217a00000-ffff88021e7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00220000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000096 [ 0.000000] 0: 0x00000100 -> 0x000cfe90 [ 0.000000] 0: 0x00100000 -> 0x00220000 [ 0.000000] On node 0 totalpages: 2031126 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31 [ 0.000000] Normal zone: 16128 pages used for memmap [ 0.000000] Normal zone: 1163520 pages, LIFO batch:31 [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: TEMPLATE [ 0.000000] MPTABLE: Product ID: [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] Processor #4 [ 0.000000] Processor #5 [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 6 [ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000 [ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000 [ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s85120 r8192 d21376 u262144 [ 0.000000] pcpu-alloc: s85120 r8192 d21376 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2000657 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39-rc5-ch-broken+ root=/dev/mapper/vg-root ro quiet splash vt.handoff=7 initcall_debug debug loglevel=7 acpi=off [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c4000000 [ 0.000000] Memory: 7855548k/8912896k available (5861k kernel code, 788392k absent, 268956k reserved, 5087k data, 968k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 65011712 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2809.402 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.80 BogoMIPS (lpj=28094020) [ 0.000010] pid_max: default: 32768 minimum: 301 [ 0.000027] Security Framework initialized [ 0.000040] AppArmor: AppArmor initialized [ 0.000562] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010984] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011878] Mount-cache hash table entries: 256 [ 0.011971] Initializing cgroup subsys ns [ 0.011975] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.011979] Initializing cgroup subsys cpuacct [ 0.011983] Initializing cgroup subsys memory [ 0.011990] Initializing cgroup subsys devices [ 0.011993] Initializing cgroup subsys freezer [ 0.011995] Initializing cgroup subsys net_cls [ 0.011998] Initializing cgroup subsys blkio [ 0.012004] Initializing cgroup subsys perf_event [ 0.012025] tseg: 0000000000 [ 0.012036] CPU: Physical Processor ID: 0 [ 0.012038] CPU: Processor Core ID: 0 [ 0.012041] mce: CPU supports 6 MCE banks [ 0.012049] using C1E aware idle routine [ 0.013202] ftrace: allocating 22633 entries in 89 pages [ 0.017859] Setting APIC routing to flat [ 0.017907] ExtINT not setup in hardware but reported by MP table [ 0.018126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.118144] CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00 [ 0.230016] calling trace_init_flags_sys_exit+0x0/0x12 @ 1 [ 0.230018] initcall trace_init_flags_sys_exit+0x0/0x12 returned 0 after 0 usecs [ 0.230021] calling trace_init_flags_sys_enter+0x0/0x12 @ 1 [ 0.230023] initcall trace_init_flags_sys_enter+0x0/0x12 returned 0 after 0 usecs [ 0.230025] calling init_hw_perf_events+0x0/0xf2b @ 1 [ 0.230026] Performance Events: AMD PMU driver. [ 0.230031] ... version: 0 [ 0.230033] ... bit width: 48 [ 0.230035] ... generic registers: 4 [ 0.230037] ... value mask: 0000ffffffffffff [ 0.230039] ... max period: 00007fffffffffff [ 0.230041] ... fixed-purpose events: 0 [ 0.230043] ... event mask: 000000000000000f [ 0.230051] initcall init_hw_perf_events+0x0/0xf2b returned 0 after 0 usecs [ 0.230054] calling migration_init+0x0/0x70 @ 1 [ 0.230057] initcall migration_init+0x0/0x70 returned 0 after 0 usecs [ 0.230059] calling spawn_ksoftirqd+0x0/0x54 @ 1 [ 0.230074] initcall spawn_ksoftirqd+0x0/0x54 returned 0 after 0 usecs [ 0.230076] calling init_workqueues+0x0/0x2ae @ 1 [ 0.230112] initcall init_workqueues+0x0/0x2ae returned 0 after 0 usecs [ 0.230114] calling init_jump_label_module+0x0/0x12 @ 1 [ 0.230116] initcall init_jump_label_module+0x0/0x12 returned 0 after 0 usecs [ 0.230118] calling init_jump_label+0x0/0xd4 @ 1 [ 0.230317] initcall init_jump_label+0x0/0xd4 returned 0 after 0 usecs [ 0.230320] calling init_call_single_data+0x0/0x91 @ 1 [ 0.230323] initcall init_call_single_data+0x0/0x91 returned 0 after 0 usecs [ 0.230325] calling cpu_stop_init+0x0/0xa9 @ 1 [ 0.230341] initcall cpu_stop_init+0x0/0xa9 returned 0 after 0 usecs [ 0.230343] calling relay_init+0x0/0x14 @ 1 [ 0.230345] initcall relay_init+0x0/0x14 returned 0 after 0 usecs [ 0.230347] calling tracer_alloc_buffers+0x0/0x1d4 @ 1 [ 0.230381] initcall tracer_alloc_buffers+0x0/0x1d4 returned 0 after 0 usecs [ 0.230383] calling init_trace_printk+0x0/0x12 @ 1 [ 0.230385] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs [ 0.230442] Booting Node 0, Processors #1 [ 0.230445] smpboot cpu 1: start_ip = 91000 [ 0.400012] System has AMD C1E enabled [ 0.400026] Switch to broadcast mode on CPU1 [ 0.400046] #2 [ 0.400048] smpboot cpu 2: start_ip = 91000 [ 0.570014] Switch to broadcast mode on CPU2 [ 0.570053] #3 [ 0.570054] smpboot cpu 3: start_ip = 91000 [ 0.740030] Switch to broadcast mode on CPU3 [ 0.740072] #4 [ 0.740073] smpboot cpu 4: start_ip = 91000 [ 0.910030] Switch to broadcast mode on CPU4 [ 0.910079] #5 Ok. [ 0.910083] smpboot cpu 5: start_ip = 91000 [ 1.080035] Brought up 6 CPUs [ 1.080040] Total of 6 processors activated (33713.79 BogoMIPS). [ 1.080031] Switch to broadcast mode on CPU5 [ 1.083726] Switch to broadcast mode on CPU0 [ 1.083726] devtmpfs: initialized [ 1.083726] calling init_mmap_min_addr+0x0/0x16 @ 1 [ 1.083726] initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs [ 1.083726] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 [ 1.083726] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs [ 1.083726] calling net_ns_init+0x0/0xe8 @ 1 [ 1.083726] initcall net_ns_init+0x0/0xe8 returned 0 after 0 usecs [ 1.083726] calling e820_mark_nvs_memory+0x0/0x40 @ 1 [ 1.083726] PM: Registering ACPI NVS region at cfea8000 (163840 bytes) [ 1.083726] initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs [ 1.083726] calling cpufreq_tsc+0x0/0x30 @ 1 [ 1.083726] initcall cpufreq_tsc+0x0/0x30 returned 0 after 0 usecs [ 1.083726] calling pci_reboot_init+0x0/0x14 @ 1 [ 1.083726] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling init_lapic_sysfs+0x0/0x20 @ 1 [ 1.083726] initcall init_lapic_sysfs+0x0/0x20 returned 0 after 0 usecs [ 1.083726] calling init_smp_flush+0x0/0x3d @ 1 [ 1.083726] initcall init_smp_flush+0x0/0x3d returned 0 after 0 usecs [ 1.083726] calling alloc_frozen_cpus+0x0/0x10 @ 1 [ 1.083726] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs [ 1.083726] calling sysctl_init+0x0/0x32 @ 1 [ 1.083726] initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs [ 1.083726] calling ksysfs_init+0x0/0x94 @ 1 [ 1.083726] initcall ksysfs_init+0x0/0x94 returned 0 after 0 usecs [ 1.083726] calling init_jiffies_clocksource+0x0/0x12 @ 1 [ 1.083726] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling pm_init+0x0/0x68 @ 1 [ 1.083726] initcall pm_init+0x0/0x68 returned 0 after 0 usecs [ 1.083726] calling pm_disk_init+0x0/0x19 @ 1 [ 1.083726] initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs [ 1.083726] calling swsusp_header_init+0x0/0x40 @ 1 [ 1.083726] initcall swsusp_header_init+0x0/0x40 returned 0 after 0 usecs [ 1.083726] calling init_ftrace_syscalls+0x0/0x87 @ 1 [ 1.083726] initcall init_ftrace_syscalls+0x0/0x87 returned 0 after 0 usecs [ 1.083726] calling init_zero_pfn+0x0/0x35 @ 1 [ 1.083726] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs [ 1.083726] calling fsnotify_init+0x0/0x26 @ 1 [ 1.083726] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs [ 1.083726] calling filelock_init+0x0/0x2e @ 1 [ 1.083726] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs [ 1.083726] calling init_script_binfmt+0x0/0x14 @ 1 [ 1.083726] initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling init_elf_binfmt+0x0/0x14 @ 1 [ 1.083726] initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling init_compat_elf_binfmt+0x0/0x14 @ 1 [ 1.083726] initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling debugfs_init+0x0/0x5c @ 1 [ 1.083726] initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs [ 1.083726] calling securityfs_init+0x0/0x53 @ 1 [ 1.083726] initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs [ 1.083726] calling random32_init+0x0/0xd8 @ 1 [ 1.083726] initcall random32_init+0x0/0xd8 returned 0 after 0 usecs [ 1.083726] calling sfi_sysfs_init+0x0/0xda @ 1 [ 1.083726] initcall sfi_sysfs_init+0x0/0xda returned 0 after 0 usecs [ 1.083726] calling __gnttab_init+0x0/0x26 @ 1 [ 1.083726] initcall __gnttab_init+0x0/0x26 returned -19 after 0 usecs [ 1.083726] calling regulator_init+0x0/0x6c @ 1 [ 1.083726] print_constraints: dummy: [ 1.083726] initcall regulator_init+0x0/0x6c returned 0 after 0 usecs [ 1.083726] calling early_resume_init+0x0/0x1e0 @ 1 [ 1.083726] Time: 16:58:28 Date: 05/04/11 [ 1.083726] initcall early_resume_init+0x0/0x1e0 returned 0 after 0 usecs [ 1.083726] calling cpufreq_core_init+0x0/0xac @ 1 [ 1.083726] initcall cpufreq_core_init+0x0/0xac returned 0 after 0 usecs [ 1.083726] calling cpuidle_init+0x0/0x40 @ 1 [ 1.083726] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs [ 1.083726] calling sock_init+0x0/0x83 @ 1 [ 1.083726] initcall sock_init+0x0/0x83 returned 0 after 0 usecs [ 1.083726] calling net_inuse_init+0x0/0x26 @ 1 [ 1.083726] initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs [ 1.083726] calling netlink_proto_init+0x0/0x1de @ 1 [ 1.083726] NET: Registered protocol family 16 [ 1.083726] initcall netlink_proto_init+0x0/0x1de returned 0 after 0 usecs [ 1.083726] calling bdi_class_init+0x0/0x49 @ 1 [ 1.083726] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs [ 1.083726] calling kobject_uevent_init+0x0/0x21 @ 1 [ 1.083726] initcall kobject_uevent_init+0x0/0x21 returned 0 after 0 usecs [ 1.083726] calling gpiolib_sysfs_init+0x0/0x95 @ 1 [ 1.083726] initcall gpiolib_sysfs_init+0x0/0x95 returned 0 after 0 usecs [ 1.083726] calling pcibus_class_init+0x0/0x19 @ 1 [ 1.083726] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs [ 1.083726] calling pci_driver_init+0x0/0x12 @ 1 [ 1.083726] initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling rio_bus_init+0x0/0x30 @ 1 [ 1.083726] initcall rio_bus_init+0x0/0x30 returned 0 after 0 usecs [ 1.083726] calling backlight_class_init+0x0/0x5d @ 1 [ 1.083726] initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs [ 1.083726] calling xenbus_init+0x0/0x220 @ 1 [ 1.083726] initcall xenbus_init+0x0/0x220 returned -19 after 0 usecs [ 1.083726] calling tty_class_init+0x0/0x34 @ 1 [ 1.083726] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs [ 1.083726] calling vtconsole_class_init+0x0/0xeb @ 1 [ 1.083726] initcall vtconsole_class_init+0x0/0xeb returned 0 after 0 usecs [ 1.083726] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1 [ 1.083726] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs [ 1.083726] calling register_node_type+0x0/0x12 @ 1 [ 1.083726] initcall register_node_type+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling spi_init+0x0/0x95 @ 1 [ 1.083726] initcall spi_init+0x0/0x95 returned 0 after 0 usecs [ 1.083726] calling i2c_init+0x0/0x6f @ 1 [ 1.083726] initcall i2c_init+0x0/0x6f returned 0 after 0 usecs [ 1.083726] calling amd_postcore_init+0x0/0x14f @ 1 [ 1.083726] node 0 link 0: io port [1000, ffffff] [ 1.083726] TOM: 00000000d0000000 aka 3328M [ 1.083726] Fam 10h mmconf [e0000000, efffffff] [ 1.083726] node 0 link 0: mmio [a0000, bffff] [ 1.083726] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] [ 1.083726] node 0 link 0: mmio [f0000000, fe4fffff] [ 1.083726] node 0 link 0: mmio [fe500000, fe6fffff] [ 1.083726] node 0 link 0: mmio [fe700000, ffdfffff] [ 1.083726] TOM2: 0000000230000000 aka 8960M [ 1.083726] bus: [00, 07] on node 0 link 0 [ 1.083726] bus: 00 index 0 [io 0x0000-0xffff] [ 1.083726] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 1.083726] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 1.083726] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 1.083726] bus: 00 index 4 [mem 0x230000000-0xfcffffffff] [ 1.083726] Extended Config Space enabled on 1 nodes [ 1.083726] initcall amd_postcore_init+0x0/0x14f returned 0 after 0 usecs [ 1.083726] calling arch_kdebugfs_init+0x0/0x24 @ 1 [ 1.083726] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs [ 1.083726] calling configure_trampolines+0x0/0x29 @ 1 [ 1.083726] initcall configure_trampolines+0x0/0x29 returned 0 after 0 usecs [ 1.083726] calling mtrr_if_init+0x0/0x64 @ 1 [ 1.083726] initcall mtrr_if_init+0x0/0x64 returned 0 after 0 usecs [ 1.083726] calling ffh_cstate_init+0x0/0x2a @ 1 [ 1.083726] initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs [ 1.083726] initcall ffh_cstate_init+0x0/0x2a returned with error code -1 [ 1.083726] calling acpi_pci_init+0x0/0x61 @ 1 [ 1.083726] initcall acpi_pci_init+0x0/0x61 returned 0 after 0 usecs [ 1.083726] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 [ 1.083726] initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs [ 1.083726] calling register_xen_pci_notifier+0x0/0x31 @ 1 [ 1.083726] initcall register_xen_pci_notifier+0x0/0x31 returned 0 after 0 usecs [ 1.083726] calling dmi_id_init+0x0/0x318 @ 1 [ 1.083726] initcall dmi_id_init+0x0/0x318 returned 0 after 0 usecs [ 1.083726] calling pci_arch_init+0x0/0x69 @ 1 [ 1.083726] PCI: Using configuration type 1 for base access [ 1.083726] PCI: Using configuration type 1 for extended access [ 1.083726] initcall pci_arch_init+0x0/0x69 returned 0 after 0 usecs [ 1.083726] calling topology_init+0x0/0x96 @ 1 [ 1.083726] initcall topology_init+0x0/0x96 returned 0 after 0 usecs [ 1.083726] calling mtrr_init_finialize+0x0/0x36 @ 1 [ 1.083726] initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs [ 1.083726] calling init_vdso_vars+0x0/0x1b0 @ 1 [ 1.083726] initcall init_vdso_vars+0x0/0x1b0 returned 0 after 0 usecs [ 1.083726] calling sysenter_setup+0x0/0x2c8 @ 1 [ 1.083726] initcall sysenter_setup+0x0/0x2c8 returned 0 after 0 usecs [ 1.083726] calling param_sysfs_init+0x0/0x1af @ 1 [ 1.083726] initcall param_sysfs_init+0x0/0x1af returned 0 after 0 usecs [ 1.083726] calling pm_sysrq_init+0x0/0x20 @ 1 [ 1.083726] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs [ 1.083726] calling default_bdi_init+0x0/0xa8 @ 1 [ 1.083726] initcall default_bdi_init+0x0/0xa8 returned 0 after 0 usecs [ 1.083726] calling init_bio+0x0/0x117 @ 1 [ 1.083726] bio: create slab at 0 [ 1.083726] initcall init_bio+0x0/0x117 returned 0 after 0 usecs [ 1.083726] calling fsnotify_notification_init+0x0/0x8b @ 1 [ 1.083726] initcall fsnotify_notification_init+0x0/0x8b returned 0 after 0 usecs [ 1.083726] calling cryptomgr_init+0x0/0x12 @ 1 [ 1.083726] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling blk_settings_init+0x0/0x2a @ 1 [ 1.083726] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs [ 1.083726] calling blk_ioc_init+0x0/0x2a @ 1 [ 1.083726] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs [ 1.083726] calling blk_softirq_init+0x0/0x6d @ 1 [ 1.083726] initcall blk_softirq_init+0x0/0x6d returned 0 after 0 usecs [ 1.083726] calling blk_iopoll_setup+0x0/0x6d @ 1 [ 1.083726] initcall blk_iopoll_setup+0x0/0x6d returned 0 after 0 usecs [ 1.083726] calling genhd_device_init+0x0/0x7b @ 1 [ 1.083726] initcall genhd_device_init+0x0/0x7b returned 0 after 0 usecs [ 1.083726] calling blk_dev_integrity_init+0x0/0x2a @ 1 [ 1.083726] initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs [ 1.083726] calling gpiolib_debugfs_init+0x0/0x24 @ 1 [ 1.083726] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs [ 1.083726] calling stmpe_gpio_init+0x0/0x12 @ 1 [ 1.083726] initcall stmpe_gpio_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling tc3589x_gpio_init+0x0/0x12 @ 1 [ 1.083726] initcall tc3589x_gpio_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling sx150x_init+0x0/0x14 @ 1 [ 1.083726] initcall sx150x_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling pci_slot_init+0x0/0x50 @ 1 [ 1.083726] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs [ 1.083726] calling fbmem_init+0x0/0x98 @ 1 [ 1.083726] initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs [ 1.083726] calling acpi_init+0x0/0x9f @ 1 [ 1.083726] ACPI: Interpreter disabled. [ 1.083726] initcall acpi_init+0x0/0x9f returned -19 after 0 usecs [ 1.083726] calling dock_init+0x0/0xa5 @ 1 [ 1.083726] initcall dock_init+0x0/0xa5 returned 0 after 0 usecs [ 1.083726] calling acpi_pci_root_init+0x0/0x2d @ 1 [ 1.083726] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 0 usecs [ 1.083726] calling acpi_pci_link_init+0x0/0x3e @ 1 [ 1.083726] initcall acpi_pci_link_init+0x0/0x3e returned 0 after 0 usecs [ 1.083726] calling pnp_init+0x0/0x12 @ 1 [ 1.083726] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling xen_setup_shutdown_event+0x0/0x30 @ 1 [ 1.083726] initcall xen_setup_shutdown_event+0x0/0x30 returned -19 after 0 usecs [ 1.083726] calling balloon_init+0x0/0x128 @ 1 [ 1.083726] initcall balloon_init+0x0/0x128 returned -19 after 0 usecs [ 1.083726] calling xenbus_probe_backend_init+0x0/0x2d @ 1 [ 1.083726] initcall xenbus_probe_backend_init+0x0/0x2d returned 0 after 0 usecs [ 1.083726] calling balloon_init+0x0/0x100 @ 1 [ 1.083726] initcall balloon_init+0x0/0x100 returned -19 after 0 usecs [ 1.083726] calling pm8607_regulator_init+0x0/0x12 @ 1 [ 1.083726] initcall pm8607_regulator_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling ab8500_regulator_init+0x0/0x31 @ 1 [ 1.083726] initcall ab8500_regulator_init+0x0/0x31 returned 0 after 0 usecs [ 1.083726] calling misc_init+0x0/0xb6 @ 1 [ 1.083726] initcall misc_init+0x0/0xb6 returned 0 after 0 usecs [ 1.083726] calling vga_arb_device_init+0x0/0x77 @ 1 [ 1.083726] vgaarb: loaded [ 1.083726] initcall vga_arb_device_init+0x0/0x77 returned 0 after 0 usecs [ 1.083726] calling cn_init+0x0/0xa3 @ 1 [ 1.083726] initcall cn_init+0x0/0xa3 returned 0 after 0 usecs [ 1.083726] calling pm860x_i2c_init+0x0/0x33 @ 1 [ 1.083726] initcall pm860x_i2c_init+0x0/0x33 returned 0 after 0 usecs [ 1.083726] calling stmpe_init+0x0/0x14 @ 1 [ 1.083726] initcall stmpe_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling tc3589x_init+0x0/0x14 @ 1 [ 1.083726] initcall tc3589x_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling wm831x_i2c_init+0x0/0x33 @ 1 [ 1.083726] initcall wm831x_i2c_init+0x0/0x33 returned 0 after 0 usecs [ 1.083726] calling wm831x_spi_init+0x0/0xe8 @ 1 [ 1.083726] initcall wm831x_spi_init+0x0/0xe8 returned 0 after 0 usecs [ 1.083726] calling wm8350_i2c_init+0x0/0x14 @ 1 [ 1.083726] initcall wm8350_i2c_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling da903x_init+0x0/0x14 @ 1 [ 1.083726] initcall da903x_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling max8925_i2c_init+0x0/0x33 @ 1 [ 1.083726] initcall max8925_i2c_init+0x0/0x33 returned 0 after 0 usecs [ 1.083726] calling max8997_i2c_init+0x0/0x14 @ 1 [ 1.083726] initcall max8997_i2c_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling max8998_i2c_init+0x0/0x14 @ 1 [ 1.083726] initcall max8998_i2c_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling ab3100_i2c_init+0x0/0x14 @ 1 [ 1.083726] initcall ab3100_i2c_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling ab3550_i2c_init+0x0/0x14 @ 1 [ 1.083726] initcall ab3550_i2c_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling ab8500_sysctrl_init+0x0/0x12 @ 1 [ 1.083726] initcall ab8500_sysctrl_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling ab8500_debug_init+0x0/0x12 @ 1 [ 1.083726] initcall ab8500_debug_init+0x0/0x12 returned 0 after 0 usecs [ 1.083726] calling tps6586x_init+0x0/0x14 @ 1 [ 1.083726] initcall tps6586x_init+0x0/0x14 returned 0 after 0 usecs [ 1.083726] calling init_scsi+0x0/0x91 @ 1 [ 1.083726] SCSI subsystem initialized [ 1.083726] initcall init_scsi+0x0/0x91 returned 0 after 0 usecs [ 1.083726] calling ata_init+0x0/0x453 @ 1 [ 1.083726] libata version 3.00 loaded. [ 1.083726] initcall ata_init+0x0/0x453 returned 0 after 0 usecs [ 1.083726] calling phy_init+0x0/0x2e @ 1 [ 1.083726] initcall phy_init+0x0/0x2e returned 0 after 0 usecs [ 1.083726] calling usb_init+0x0/0x15f @ 1 [ 1.083726] usbcore: registered new interface driver usbfs [ 1.083726] usbcore: registered new interface driver hub [ 1.083726] usbcore: registered new device driver usb [ 1.083726] initcall usb_init+0x0/0x15f returned 0 after 0 usecs [ 1.083726] calling serio_init+0x0/0x31 @ 1 [ 1.083726] initcall serio_init+0x0/0x31 returned 0 after 0 usecs [ 1.083726] calling input_init+0x0/0x10d @ 1 [ 1.083726] initcall input_init+0x0/0x10d returned 0 after 0 usecs [ 1.083726] calling rtc_init+0x0/0x6a @ 1 [ 1.083726] initcall rtc_init+0x0/0x6a returned 0 after 0 usecs [ 1.083726] calling power_supply_class_init+0x0/0x40 @ 1 [ 1.083726] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs [ 1.083726] calling hwmon_init+0x0/0xee @ 1 [ 1.083726] initcall hwmon_init+0x0/0xee returned 0 after 0 usecs [ 1.083726] calling md_init+0x0/0x143 @ 1 [ 1.083726] initcall md_init+0x0/0x143 returned 0 after 0 usecs [ 1.083726] calling mmc_init+0x0/0x72 @ 1 [ 1.083726] initcall mmc_init+0x0/0x72 returned 0 after 0 usecs [ 1.083726] calling leds_init+0x0/0x44 @ 1 [ 1.083726] initcall leds_init+0x0/0x44 returned 0 after 0 usecs [ 1.083726] calling acpi_wmi_init+0x0/0x72 @ 1 [ 1.083726] initcall acpi_wmi_init+0x0/0x72 returned -19 after 0 usecs [ 1.083726] calling pci_subsys_init+0x0/0x4d @ 1 [ 1.083726] PCI: Probing PCI hardware [ 1.083726] PCI: Probing PCI hardware (bus 00) [ 1.083726] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.083726] pci 0000:00:0a.0: PME# disabled [ 1.083726] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007] [ 1.083726] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003] [ 1.083726] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007] [ 1.083726] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003] [ 1.083726] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f] [ 1.083726] pci 0000:00:11.0: reg 24: [mem 0xfe4ffc00-0xfe4fffff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:12.0: reg 10: [mem 0xfe4fe000-0xfe4fefff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:12.2: reg 10: [mem 0xfe4ff800-0xfe4ff8ff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:12.2: supports D1 D2 [ 1.083726] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.083726] pci 0000:00:12.2: PME# disabled [ 1.083726] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:13.0: reg 10: [mem 0xfe4fd000-0xfe4fdfff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:13.2: reg 10: [mem 0xfe4ff400-0xfe4ff4ff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:13.2: supports D1 D2 [ 1.083726] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.083726] pci 0000:00:13.2: PME# disabled [ 1.083726] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: sb600_disable_hpet_bar+0x0/0x60 [ 1.083726] Calling fixup hook: force_disable_hpet_msi+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:14.2: reg 10: [mem 0xfe4f4000-0xfe4f7fff 64bit] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.083726] pci 0000:00:14.2: PME# disabled [ 1.083726] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:14.5: reg 10: [mem 0xfe4fc000-0xfe4fcfff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:15.0: supports D1 D2 [ 1.083726] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:16.0: reg 10: [mem 0xfe4f3000-0xfe4f3fff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:00:16.2: reg 10: [mem 0xfe4ff000-0xfe4ff0ff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:16.2: supports D1 D2 [ 1.083726] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.083726] pci 0000:00:16.2: PME# disabled [ 1.083726] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] PCI: peer root bus 00 res updated from pci conf [ 1.083726] pci 0000:01:05.0: [1002:9714] type 0 class 0x000300 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 1.083726] pci 0000:01:05.0: reg 14: [io 0xb000-0xb0ff] [ 1.083726] pci 0000:01:05.0: reg 18: [mem 0xfe6f0000-0xfe6fffff] [ 1.083726] pci 0000:01:05.0: reg 24: [mem 0xfe500000-0xfe5fffff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:01:05.0: supports D1 D2 [ 1.083726] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:01:05.1: reg 10: [mem 0xfe6e8000-0xfe6ebfff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:01:05.1: supports D1 D2 [ 1.083726] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.083726] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 1.083726] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe6fffff] [ 1.083726] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.083726] pci 0000:02:00.0: [197b:2361] type 0 class 0x000101 [ 1.083726] Calling fixup hook: quirk_jmicron_ata+0x0/0x150 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:02:00.0: reg 24: [mem 0xfe7fe000-0xfe7fffff] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:02:00.0: PME# supported from D3hot [ 1.083726] pci 0000:02:00.0: PME# disabled [ 1.083726] pci 0000:02:00.1: [197b:2361] type 0 class 0x000101 [ 1.083726] Calling fixup hook: quirk_jmicron_ata+0x0/0x150 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:02:00.1: reg 10: [io 0xcc00-0xcc07] [ 1.083726] pci 0000:02:00.1: reg 14: [io 0xc880-0xc883] [ 1.083726] pci 0000:02:00.1: reg 18: [io 0xc800-0xc807] [ 1.083726] pci 0000:02:00.1: reg 1c: [io 0xc480-0xc483] [ 1.083726] pci 0000:02:00.1: reg 20: [io 0xc400-0xc40f] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.083726] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 1.083726] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.083726] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.083726] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.083726] pci 0000:03:07.0: [1106:3044] type 0 class 0x000c00 [ 1.083726] Calling fixup hook: quirk_no_ata_d3+0x0/0x20 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:03:07.0: reg 10: [mem 0xfe8ff800-0xfe8fffff] [ 1.083726] pci 0000:03:07.0: reg 14: [io 0xdc00-0xdc7f] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:03:07.0: supports D2 [ 1.083726] pci 0000:03:07.0: PME# supported from D2 D3hot D3cold [ 1.083726] pci 0000:03:07.0: PME# disabled [ 1.083726] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 1.083726] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 1.083726] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 1.083726] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.083726] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 1.083726] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.083726] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 1.083726] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 1.083726] pci 0000:00:14.4: bridge window [mem 0x230000000-0xfcffffffff] (subtractive decode) [ 1.083726] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 [ 1.083726] Calling fixup hook: quirk_mmio_always_on+0x0/0x1c [ 1.083726] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff] [ 1.083726] pci 0000:04:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 1.083726] pci 0000:04:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 1.083726] pci 0000:04:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 1.083726] Calling fixup hook: quirk_resource_alignment+0x0/0x170 [ 1.083726] pci 0000:04:00.0: supports D1 D2 [ 1.083726] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.083726] pci 0000:04:00.0: PME# disabled [ 1.100028] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 1.100036] pci 0000:00:15.0: bridge window [io 0xe000-0xefff] [ 1.100040] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.100044] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.100353] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 1.100483] pci 0000:00:14.3: default IRQ router [1002:439d] [ 1.100493] PCI: pci_cache_line_size set to 64 bytes [ 1.100584] reserve RAM buffer: 0000000000096800 - 000000000009ffff [ 1.100586] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff [ 1.100590] initcall pci_subsys_init+0x0/0x4d returned 0 after 19531 usecs [ 1.100592] calling proto_init+0x0/0x12 @ 1 [ 1.100595] initcall proto_init+0x0/0x12 returned 0 after 0 usecs [ 1.100597] calling net_dev_init+0x0/0x1c8 @ 1 [ 1.100642] initcall net_dev_init+0x0/0x1c8 returned 0 after 0 usecs [ 1.100644] calling neigh_init+0x0/0x71 @ 1 [ 1.100646] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs [ 1.100647] calling fib_rules_init+0x0/0xa6 @ 1 [ 1.100649] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs [ 1.100651] calling pktsched_init+0x0/0xed @ 1 [ 1.100654] initcall pktsched_init+0x0/0xed returned 0 after 0 usecs [ 1.100656] calling tc_filter_init+0x0/0x4c @ 1 [ 1.100658] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs [ 1.100660] calling tc_action_init+0x0/0x4c @ 1 [ 1.100661] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs [ 1.100663] calling genl_init+0x0/0x93 @ 1 [ 1.100669] initcall genl_init+0x0/0x93 returned 0 after 0 usecs [ 1.100671] calling cipso_v4_init+0x0/0x61 @ 1 [ 1.100674] initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs [ 1.100676] calling netlbl_init+0x0/0x81 @ 1 [ 1.100677] NetLabel: Initializing [ 1.100679] NetLabel: domain hash size = 128 [ 1.100681] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.100689] NetLabel: unlabeled traffic allowed by default [ 1.100692] initcall netlbl_init+0x0/0x81 returned 0 after 0 usecs [ 1.100694] calling rfkill_init+0x0/0x97 @ 1 [ 1.100717] initcall rfkill_init+0x0/0x97 returned 0 after 0 usecs [ 1.100719] calling sysctl_init+0x0/0x48 @ 1 [ 1.100722] initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs [ 1.100724] calling ab8500_gpadc_init+0x0/0x12 @ 1 [ 1.100730] initcall ab8500_gpadc_init+0x0/0x12 returned 0 after 0 usecs [ 1.100733] calling print_ICs+0x0/0x51e @ 1 [ 1.100735] initcall print_ICs+0x0/0x51e returned 0 after 0 usecs [ 1.100736] calling hpet_late_init+0x0/0xfb @ 1 [ 1.100738] initcall hpet_late_init+0x0/0xfb returned -19 after 0 usecs [ 1.100740] calling init_amd_nbs+0x0/0xb8 @ 1 [ 1.100760] initcall init_amd_nbs+0x0/0xb8 returned 0 after 0 usecs [ 1.100762] calling clocksource_done_booting+0x0/0x5a @ 1 [ 1.100765] initcall clocksource_done_booting+0x0/0x5a returned 0 after 0 usecs [ 1.100767] calling ftrace_init_debugfs+0x0/0x213 @ 1 [ 1.100786] initcall ftrace_init_debugfs+0x0/0x213 returned 0 after 0 usecs [ 1.100787] calling rb_init_debugfs+0x0/0x2f @ 1 [ 1.100790] initcall rb_init_debugfs+0x0/0x2f returned 0 after 0 usecs [ 1.100791] calling tracer_init_debugfs+0x0/0x3aa @ 1 [ 1.100837] initcall tracer_init_debugfs+0x0/0x3aa returned 0 after 0 usecs [ 1.100839] calling init_trace_printk_function_export+0x0/0x2f @ 1 [ 1.100842] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 0 usecs [ 1.100844] calling event_trace_init+0x0/0x27c @ 1 [ 1.104225] initcall event_trace_init+0x0/0x27c returned 0 after 0 usecs [ 1.104228] calling init_kprobe_trace+0x0/0x78 @ 1 [ 1.104231] initcall init_kprobe_trace+0x0/0x78 returned 0 after 0 usecs [ 1.104233] calling init_pipe_fs+0x0/0x4c @ 1 [ 1.104240] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 usecs [ 1.104242] calling eventpoll_init+0x0/0xda @ 1 [ 1.104246] initcall eventpoll_init+0x0/0xda returned 0 after 0 usecs [ 1.104248] calling anon_inode_init+0x0/0x12e @ 1 [ 1.104254] initcall anon_inode_init+0x0/0x12e returned 0 after 0 usecs [ 1.104256] calling tomoyo_initerface_init+0x0/0x135 @ 1 [ 1.104258] initcall tomoyo_initerface_init+0x0/0x135 returned 0 after 0 usecs [ 1.104259] calling aa_create_aafs+0x0/0x103 @ 1 [ 1.104267] AppArmor: AppArmor Filesystem Enabled [ 1.104271] initcall aa_create_aafs+0x0/0x103 returned 0 after 0 usecs [ 1.104273] calling blk_scsi_ioctl_init+0x0/0x289 @ 1 [ 1.104274] initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs [ 1.104277] calling acpi_event_init+0x0/0x7d @ 1 [ 1.104279] initcall acpi_event_init+0x0/0x7d returned 0 after 0 usecs [ 1.104280] calling pnp_system_init+0x0/0x12 @ 1 [ 1.104288] initcall pnp_system_init+0x0/0x12 returned 0 after 0 usecs [ 1.104290] calling pnpacpi_init+0x0/0x8c @ 1 [ 1.104291] pnp: PnP ACPI: disabled [ 1.104293] initcall pnpacpi_init+0x0/0x8c returned 0 after 0 usecs [ 1.104295] calling chr_dev_init+0x0/0xc1 @ 1 [ 1.105025] initcall chr_dev_init+0x0/0xc1 returned 0 after 0 usecs [ 1.105027] calling firmware_class_init+0x0/0x19 @ 1 [ 1.105034] initcall firmware_class_init+0x0/0x19 returned 0 after 0 usecs [ 1.105036] calling thermal_init+0x0/0x75 @ 1 [ 1.105043] initcall thermal_init+0x0/0x75 returned 0 after 0 usecs [ 1.105045] calling cpufreq_gov_performance_init+0x0/0x12 @ 1 [ 1.105047] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs [ 1.105049] calling init_acpi_pm_clocksource+0x0/0xe2 @ 1 [ 1.105051] initcall init_acpi_pm_clocksource+0x0/0xe2 returned -19 after 0 usecs [ 1.105053] calling pcibios_assign_resources+0x0/0x76 @ 1 [ 1.105101] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.105105] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 1.105109] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe6fffff] [ 1.105112] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.105117] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 1.105120] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.105123] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 1.105126] pci 0000:00:0a.0: bridge window [mem pref disabled] [ 1.105130] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 1.105133] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 1.105138] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff] [ 1.105142] pci 0000:00:14.4: bridge window [mem pref disabled] [ 1.105148] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 1.105151] pci 0000:00:15.0: bridge window [io 0xe000-0xefff] [ 1.105155] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.105160] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.105174] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 1.105177] pci 0000:00:0a.0: setting latency timer to 64 [ 1.105186] pci 0000:00:15.0: can't find IRQ for PCI INT A; probably buggy MP table [ 1.105190] pci 0000:00:15.0: setting latency timer to 64 [ 1.105193] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 1.105194] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 1.105196] pci_bus 0000:00: resource 6 [mem 0xd0000000-0xdfffffff] [ 1.105197] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff] [ 1.105199] pci_bus 0000:00: resource 8 [mem 0x230000000-0xfcffffffff] [ 1.105200] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 1.105201] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe6fffff] [ 1.105203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.105205] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.105206] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff] [ 1.105208] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.105209] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 1.105210] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 1.105212] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] [ 1.105213] pci_bus 0000:03: resource 6 [mem 0xd0000000-0xdfffffff] [ 1.105215] pci_bus 0000:03: resource 7 [mem 0xf0000000-0xffffffff] [ 1.105216] pci_bus 0000:03: resource 8 [mem 0x230000000-0xfcffffffff] [ 1.105218] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.105219] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.105221] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.105223] initcall pcibios_assign_resources+0x0/0x76 returned 0 after 0 usecs [ 1.105224] calling sysctl_core_init+0x0/0x38 @ 1 [ 1.105233] initcall sysctl_core_init+0x0/0x38 returned 0 after 0 usecs [ 1.105235] calling inet_init+0x0/0x24a @ 1 [ 1.105247] NET: Registered protocol family 2 [ 1.105393] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.106350] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.108157] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.108375] TCP: Hash tables configured (established 524288 bind 65536) [ 1.108378] TCP reno registered [ 1.108390] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.108433] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.108537] initcall inet_init+0x0/0x24a returned 0 after 0 usecs [ 1.108540] calling af_unix_init+0x0/0x55 @ 1 [ 1.108542] NET: Registered protocol family 1 [ 1.108547] initcall af_unix_init+0x0/0x55 returned 0 after 0 usecs [ 1.108550] calling pci_apply_final_quirks+0x0/0x105 @ 1 [ 1.108555] Calling fixup hook: quirk_amd_780_apc_msi+0x0/0x42 [ 1.108559] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.108564] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.108568] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.108571] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.108576] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.108579] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.108582] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.108586] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.108589] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.108592] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.108596] Calling fixup hook: quirk_msi_intx_disable_ati_bug+0x0/0x47 [ 1.108600] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.108603] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.108606] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.108658] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.108661] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.120043] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.120053] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.120056] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.120079] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.120084] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.120087] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.140041] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.140051] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.140054] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.140076] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.140081] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.140084] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.140087] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.140092] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.140095] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.140099] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.140103] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.140107] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.140110] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.140115] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.140118] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.140121] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.140126] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.140129] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.170042] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.170052] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.170055] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.170058] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.170063] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.170066] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200020] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200029] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200033] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200054] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200059] Calling fixup hook: quirk_amd_nb_node+0x0/0x68 [ 1.200064] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200067] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200070] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200074] Calling fixup hook: quirk_amd_nb_node+0x0/0x68 [ 1.200078] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200081] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200084] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200088] Calling fixup hook: quirk_amd_nb_node+0x0/0x68 [ 1.200092] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200095] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200098] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200102] Calling fixup hook: quirk_amd_nb_node+0x0/0x68 [ 1.200106] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200110] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200113] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200116] Calling fixup hook: quirk_amd_nb_node+0x0/0x68 [ 1.200120] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200124] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200127] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200131] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200134] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200137] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200141] pci 0000:01:05.0: Boot video device [ 1.200145] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200148] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200151] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200155] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200159] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200162] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200167] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200170] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200174] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200179] Calling fixup hook: via_no_dac+0x0/0x40 [ 1.200183] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200186] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200189] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200228] Calling fixup hook: quirk_cardbus_legacy+0x0/0x30 [ 1.200231] Calling fixup hook: quirk_usb_early_handoff+0x0/0x4a6 [ 1.200234] Calling fixup hook: pci_fixup_video+0x0/0xac [ 1.200239] PCI: CLS 64 bytes, default 64 [ 1.200242] initcall pci_apply_final_quirks+0x0/0x105 returned 0 after 97656 usecs [ 1.200245] calling populate_rootfs+0x0/0xd3 @ 1 [ 1.200291] Trying to unpack rootfs image as initramfs... [ 1.339314] Freeing initrd memory: 10540k freed [ 1.341679] initcall populate_rootfs+0x0/0xd3 returned 0 after 136718 usecs [ 1.341683] calling pci_iommu_init+0x0/0x41 @ 1 [ 1.341740] PCI-DMA: Disabling AGP. [ 1.341740] PCI-DMA: aperture base @ c0000000 size 65536 KB [ 1.341740] PCI-DMA: using GART IOMMU. [ 1.341740] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.343247] initcall pci_iommu_init+0x0/0x41 returned 0 after 0 usecs [ 1.343251] calling calgary_fixup_tce_spaces+0x0/0xf0 @ 1 [ 1.343253] initcall calgary_fixup_tce_spaces+0x0/0xf0 returned -19 after 0 usecs [ 1.343255] calling i8259A_init_ops+0x0/0x21 @ 1 [ 1.343257] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs [ 1.343258] calling vsyscall_init+0x0/0x66 @ 1 [ 1.343325] initcall vsyscall_init+0x0/0x66 returned 0 after 0 usecs [ 1.343326] calling sbf_init+0x0/0xf4 @ 1 [ 1.343328] initcall sbf_init+0x0/0xf4 returned 0 after 0 usecs [ 1.343330] calling init_tsc_clocksource+0x0/0x5f @ 1 [ 1.343338] initcall init_tsc_clocksource+0x0/0x5f returned 0 after 0 usecs [ 1.343340] calling add_rtc_cmos+0x0/0x96 @ 1 [ 1.343381] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.343388] initcall add_rtc_cmos+0x0/0x96 returned 0 after 0 usecs [ 1.343391] calling i8237A_init_ops+0x0/0x14 @ 1 [ 1.343401] initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs [ 1.343405] calling cache_sysfs_init+0x0/0x5e @ 1 [ 1.343591] initcall cache_sysfs_init+0x0/0x5e returned 0 after 0 usecs [ 1.343593] calling mcheck_init_device+0x0/0x109 @ 1 [ 1.343678] initcall mcheck_init_device+0x0/0x109 returned 0 after 0 usecs [ 1.343681] calling threshold_init_device+0x0/0x56 @ 1 [ 1.343719] initcall threshold_init_device+0x0/0x56 returned 0 after 0 usecs [ 1.343721] calling thermal_throttle_init_device+0x0/0x9c @ 1 [ 1.343723] initcall thermal_throttle_init_device+0x0/0x9c returned 0 after 0 usecs [ 1.343726] calling ioapic_init_ops+0x0/0x62 @ 1 [ 1.343729] initcall ioapic_init_ops+0x0/0x62 returned 0 after 0 usecs [ 1.343730] calling add_pcspkr+0x0/0x3a @ 1 [ 1.343739] initcall add_pcspkr+0x0/0x3a returned 0 after 0 usecs [ 1.343742] calling start_periodic_check_for_corruption+0x0/0x50 @ 1 [ 1.343745] initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 0 usecs [ 1.343747] calling audit_classes_init+0x0/0xaf @ 1 [ 1.343750] initcall audit_classes_init+0x0/0xaf returned 0 after 0 usecs [ 1.343753] calling crc32c_intel_mod_init+0x0/0x26 @ 1 [ 1.343755] initcall crc32c_intel_mod_init+0x0/0x26 returned -19 after 0 usecs [ 1.343757] calling ia32_binfmt_init+0x0/0x14 @ 1 [ 1.343761] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 usecs [ 1.343763] calling init_sched_debug_procfs+0x0/0x2c @ 1 [ 1.343768] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 usecs [ 1.343770] calling proc_schedstat_init+0x0/0x22 @ 1 [ 1.343773] initcall proc_schedstat_init+0x0/0x22 returned 0 after 0 usecs [ 1.343775] calling proc_execdomains_init+0x0/0x22 @ 1 [ 1.343778] initcall proc_execdomains_init+0x0/0x22 returned 0 after 0 usecs [ 1.343781] calling ioresources_init+0x0/0x3c @ 1 [ 1.343784] initcall ioresources_init+0x0/0x3c returned 0 after 0 usecs [ 1.343786] calling uid_cache_init+0x0/0x95 @ 1 [ 1.343792] initcall uid_cache_init+0x0/0x95 returned 0 after 0 usecs [ 1.343794] calling init_posix_timers+0x0/0x1f4 @ 1 [ 1.343804] initcall init_posix_timers+0x0/0x1f4 returned 0 after 0 usecs [ 1.343806] calling init_posix_cpu_timers+0x0/0xbf @ 1 [ 1.343809] initcall init_posix_cpu_timers+0x0/0xbf returned 0 after 0 usecs [ 1.343811] calling nsproxy_cache_init+0x0/0x2d @ 1 [ 1.343814] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs [ 1.343817] calling create_proc_profile+0x0/0x2d0 @ 1 [ 1.343819] initcall create_proc_profile+0x0/0x2d0 returned 0 after 0 usecs [ 1.343822] calling timekeeping_init_ops+0x0/0x14 @ 1 [ 1.343824] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs [ 1.343826] calling init_clocksource_sysfs+0x0/0x50 @ 1 [ 1.343835] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 0 usecs [ 1.343837] calling init_timer_list_procfs+0x0/0x2c @ 1 [ 1.343840] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs [ 1.343843] calling init_tstats_procfs+0x0/0x2c @ 1 [ 1.343846] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 usecs [ 1.343848] calling futex_init+0x0/0x62 @ 1 [ 1.343853] initcall futex_init+0x0/0x62 returned 0 after 0 usecs [ 1.343855] calling proc_dma_init+0x0/0x22 @ 1 [ 1.343859] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs [ 1.343862] calling proc_modules_init+0x0/0x22 @ 1 [ 1.343865] initcall proc_modules_init+0x0/0x22 returned 0 after 0 usecs [ 1.343867] calling kallsyms_init+0x0/0x25 @ 1 [ 1.343881] initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs [ 1.343884] calling snapshot_device_init+0x0/0x12 @ 1 [ 1.343897] initcall snapshot_device_init+0x0/0x12 returned 0 after 0 usecs [ 1.343899] calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 [ 1.343914] initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 0 usecs [ 1.343916] calling crash_notes_memory_init+0x0/0x36 @ 1 [ 1.343920] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs [ 1.343922] calling user_namespaces_init+0x0/0x2d @ 1 [ 1.343926] initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs [ 1.343928] calling pid_namespaces_init+0x0/0x2d @ 1 [ 1.343932] initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 usecs [ 1.343933] calling audit_init+0x0/0x142 @ 1 [ 1.343935] audit: initializing netlink socket (disabled) [ 1.343948] type=2000 audit(1304528308.340:1): initialized [ 1.343952] initcall audit_init+0x0/0x142 returned 0 after 0 usecs [ 1.343954] calling audit_watch_init+0x0/0x3a @ 1 [ 1.343956] initcall audit_watch_init+0x0/0x3a returned 0 after 0 usecs [ 1.343958] calling audit_tree_init+0x0/0x58 @ 1 [ 1.343960] initcall audit_tree_init+0x0/0x58 returned 0 after 0 usecs [ 1.343962] calling init_kprobes+0x0/0x17e @ 1 [ 1.349469] initcall init_kprobes+0x0/0x17e returned 0 after 9765 usecs [ 1.349471] calling hung_task_init+0x0/0x56 @ 1 [ 1.350021] initcall hung_task_init+0x0/0x56 returned 0 after 0 usecs [ 1.350021] calling utsname_sysctl_init+0x0/0x14 @ 1 [ 1.350022] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 usecs [ 1.350024] calling init_tracepoints+0x0/0x20 @ 1 [ 1.350027] initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs [ 1.350028] calling init_lstats_procfs+0x0/0x25 @ 1 [ 1.350032] initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 usecs [ 1.350034] calling ftrace_mod_cmd_init+0x0/0x12 @ 1 [ 1.350035] initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 0 usecs [ 1.350037] calling init_events+0x0/0x60 @ 1 [ 1.350042] initcall init_events+0x0/0x60 returned 0 after 0 usecs [ 1.350044] calling init_function_trace+0x0/0x3e @ 1 [ 1.350046] initcall init_function_trace+0x0/0x3e returned 0 after 0 usecs [ 1.350048] calling init_wakeup_tracer+0x0/0x22 @ 1 [ 1.350049] initcall init_wakeup_tracer+0x0/0x22 returned 0 after 0 usecs [ 1.350051] calling stack_trace_init+0x0/0x6b @ 1 [ 1.350058] initcall stack_trace_init+0x0/0x6b returned 0 after 0 usecs [ 1.350060] calling init_mmio_trace+0x0/0x12 @ 1 [ 1.350061] initcall init_mmio_trace+0x0/0x12 returned 0 after 0 usecs [ 1.350063] calling init_graph_trace+0x0/0x65 @ 1 [ 1.350066] initcall init_graph_trace+0x0/0x65 returned 0 after 0 usecs [ 1.350068] calling init_blk_tracer+0x0/0x5a @ 1 [ 1.350070] initcall init_blk_tracer+0x0/0x5a returned 0 after 0 usecs [ 1.350071] calling perf_event_sysfs_init+0x0/0x99 @ 1 [ 1.350111] initcall perf_event_sysfs_init+0x0/0x99 returned 0 after 0 usecs [ 1.350113] calling init_per_zone_wmark_min+0x0/0x6b @ 1 [ 1.350406] initcall init_per_zone_wmark_min+0x0/0x6b returned 0 after 0 usecs [ 1.350408] calling kswapd_init+0x0/0x75 @ 1 [ 1.360026] initcall kswapd_init+0x0/0x75 returned 0 after 9765 usecs [ 1.360026] calling extfrag_debug_init+0x0/0x7a @ 1 [ 1.360026] initcall extfrag_debug_init+0x0/0x7a returned 0 after 0 usecs [ 1.360026] calling setup_vmstat+0x0/0xcc @ 1 [ 1.360026] initcall setup_vmstat+0x0/0xcc returned 0 after 0 usecs [ 1.360028] calling mm_sysfs_init+0x0/0x29 @ 1 [ 1.360032] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs [ 1.360034] calling proc_vmalloc_init+0x0/0x25 @ 1 [ 1.360037] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 0 usecs [ 1.360039] calling procswaps_init+0x0/0x22 @ 1 [ 1.360042] initcall procswaps_init+0x0/0x22 returned 0 after 0 usecs [ 1.360044] calling hugetlb_init+0x0/0x44d @ 1 [ 1.360047] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.360060] initcall hugetlb_init+0x0/0x44d returned 0 after 0 usecs [ 1.360062] calling ksm_init+0x0/0x15c @ 1 [ 1.360072] initcall ksm_init+0x0/0x15c returned 0 after 0 usecs [ 1.360072] calling slab_proc_init+0x0/0x25 @ 1 [ 1.360072] initcall slab_proc_init+0x0/0x25 returned 0 after 0 usecs [ 1.360072] calling slab_sysfs_init+0x0/0x108 @ 1 [ 1.360939] initcall slab_sysfs_init+0x0/0x108 returned 0 after 0 usecs [ 1.360941] calling fcntl_init+0x0/0x2a @ 1 [ 1.360946] initcall fcntl_init+0x0/0x2a returned 0 after 0 usecs [ 1.360948] calling proc_filesystems_init+0x0/0x22 @ 1 [ 1.360952] initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs [ 1.360954] calling fsnotify_mark_init+0x0/0x40 @ 1 [ 1.360965] initcall fsnotify_mark_init+0x0/0x40 returned 0 after 0 usecs [ 1.360965] calling dnotify_init+0x0/0x7b @ 1 [ 1.360965] initcall dnotify_init+0x0/0x7b returned 0 after 0 usecs [ 1.360965] calling inotify_user_setup+0x0/0x70 @ 1 [ 1.360965] initcall inotify_user_setup+0x0/0x70 returned 0 after 0 usecs [ 1.360965] calling fanotify_user_setup+0x0/0x52 @ 1 [ 1.360965] initcall fanotify_user_setup+0x0/0x52 returned 0 after 0 usecs [ 1.360965] calling aio_setup+0x0/0x78 @ 1 [ 1.360965] initcall aio_setup+0x0/0x78 returned 0 after 0 usecs [ 1.360965] calling proc_locks_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_locks_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling init_sys32_ioctl+0x0/0x28 @ 1 [ 1.360965] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 0 usecs [ 1.360965] calling init_mbcache+0x0/0x14 @ 1 [ 1.360965] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs [ 1.360965] calling dquot_init+0x0/0x123 @ 1 [ 1.360965] VFS: Disk quotas dquot_6.5.2 [ 1.360965] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.360965] initcall dquot_init+0x0/0x123 returned 0 after 0 usecs [ 1.360965] calling quota_init+0x0/0x26 @ 1 [ 1.360965] initcall quota_init+0x0/0x26 returned 0 after 0 usecs [ 1.360965] calling proc_cmdline_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_consoles_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_consoles_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_cpuinfo_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_devices_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_interrupts_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_loadavg_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_meminfo_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_stat_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_uptime_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_version_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_softirqs_init+0x0/0x22 @ 1 [ 1.360965] initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs [ 1.360965] calling proc_kcore_init+0x0/0xa9 @ 1 [ 1.360965] initcall proc_kcore_init+0x0/0xa9 returned 0 after 0 usecs [ 1.360965] calling vmcore_init+0x0/0x377 @ 1 [ 1.360965] initcall vmcore_init+0x0/0x377 returned 0 after 0 usecs [ 1.360965] calling proc_kmsg_init+0x0/0x25 @ 1 [ 1.360965] initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs [ 1.360965] calling proc_page_init+0x0/0x42 @ 1 [ 1.360965] initcall proc_page_init+0x0/0x42 returned 0 after 0 usecs [ 1.360965] calling init_devpts_fs+0x0/0x4c @ 1 [ 1.360965] initcall init_devpts_fs+0x0/0x4c returned 0 after 0 usecs [ 1.360965] calling init_ext3_fs+0x0/0x6f @ 1 [ 1.360965] initcall init_ext3_fs+0x0/0x6f returned 0 after 0 usecs [ 1.360965] calling init_ext2_fs+0x0/0x6f @ 1 [ 1.360965] initcall init_ext2_fs+0x0/0x6f returned 0 after 0 usecs [ 1.360965] calling ext4_init_fs+0x0/0x200 @ 1 [ 1.360965] initcall ext4_init_fs+0x0/0x200 returned 0 after 0 usecs [ 1.360965] calling journal_init+0x0/0xa1 @ 1 [ 1.360965] initcall journal_init+0x0/0xa1 returned 0 after 0 usecs [ 1.360965] calling journal_init+0x0/0x112 @ 1 [ 1.360965] initcall journal_init+0x0/0x112 returned 0 after 0 usecs [ 1.360965] calling init_ramfs_fs+0x0/0x12 @ 1 [ 1.360965] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling init_hugetlbfs_fs+0x0/0x98 @ 1 [ 1.360965] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 usecs [ 1.360965] calling ecryptfs_init+0x0/0x1d6 @ 1 [ 1.360965] initcall ecryptfs_init+0x0/0x1d6 returned 0 after 0 usecs [ 1.360965] calling fuse_init+0x0/0x1b3 @ 1 [ 1.360965] fuse init (API version 7.16) [ 1.360965] initcall fuse_init+0x0/0x1b3 returned 0 after 0 usecs [ 1.360965] calling init_pstore_fs+0x0/0x12 @ 1 [ 1.360965] initcall init_pstore_fs+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling ipc_init+0x0/0x23 @ 1 [ 1.360965] msgmni has been set to 15492 [ 1.360965] initcall ipc_init+0x0/0x23 returned 0 after 0 usecs [ 1.360965] calling ipc_sysctl_init+0x0/0x14 @ 1 [ 1.360965] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 0 usecs [ 1.360965] calling init_mqueue_fs+0x0/0xb4 @ 1 [ 1.360965] initcall init_mqueue_fs+0x0/0xb4 returned 0 after 0 usecs [ 1.360965] calling key_proc_init+0x0/0x33 @ 1 [ 1.360965] initcall key_proc_init+0x0/0x33 returned 0 after 0 usecs [ 1.360965] calling selinux_nf_ip_init+0x0/0x69 @ 1 [ 1.360965] initcall selinux_nf_ip_init+0x0/0x69 returned 0 after 0 usecs [ 1.360965] calling init_sel_fs+0x0/0x68 @ 1 [ 1.360965] initcall init_sel_fs+0x0/0x68 returned 0 after 0 usecs [ 1.360965] calling selnl_init+0x0/0x4d @ 1 [ 1.360965] initcall selnl_init+0x0/0x4d returned 0 after 0 usecs [ 1.360965] calling sel_netif_init+0x0/0x75 @ 1 [ 1.360965] initcall sel_netif_init+0x0/0x75 returned 0 after 0 usecs [ 1.360965] calling sel_netnode_init+0x0/0x79 @ 1 [ 1.360965] initcall sel_netnode_init+0x0/0x79 returned 0 after 0 usecs [ 1.360965] calling sel_netport_init+0x0/0x79 @ 1 [ 1.360965] initcall sel_netport_init+0x0/0x79 returned 0 after 0 usecs [ 1.360965] calling aurule_init+0x0/0x37 @ 1 [ 1.360965] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs [ 1.360965] calling init_smk_fs+0x0/0x7b @ 1 [ 1.360965] initcall init_smk_fs+0x0/0x7b returned 0 after 0 usecs [ 1.360965] calling crypto_wq_init+0x0/0x31 @ 1 [ 1.360965] initcall crypto_wq_init+0x0/0x31 returned 0 after 0 usecs [ 1.360965] calling crypto_algapi_init+0x0/0xd @ 1 [ 1.360965] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs [ 1.360965] calling skcipher_module_init+0x0/0x35 @ 1 [ 1.360965] initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs [ 1.360965] calling chainiv_module_init+0x0/0x12 @ 1 [ 1.360965] initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling eseqiv_module_init+0x0/0x12 @ 1 [ 1.360965] initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling hmac_module_init+0x0/0x12 @ 1 [ 1.360965] initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling md5_mod_init+0x0/0x12 @ 1 [ 1.360965] initcall md5_mod_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling crypto_ecb_module_init+0x0/0x12 @ 1 [ 1.360965] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling crypto_cbc_module_init+0x0/0x12 @ 1 [ 1.360965] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling crc32c_mod_init+0x0/0x12 @ 1 [ 1.360965] initcall crc32c_mod_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling krng_mod_init+0x0/0x12 @ 1 [ 1.360965] initcall krng_mod_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling proc_genhd_init+0x0/0x3c @ 1 [ 1.360965] initcall proc_genhd_init+0x0/0x3c returned 0 after 0 usecs [ 1.360965] calling bsg_init+0x0/0x16f @ 1 [ 1.360965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.360965] initcall bsg_init+0x0/0x16f returned 0 after 0 usecs [ 1.360965] calling init_cgroup_blkio+0x0/0x12 @ 1 [ 1.360965] initcall init_cgroup_blkio+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling throtl_init+0x0/0x44 @ 1 [ 1.360965] initcall throtl_init+0x0/0x44 returned 0 after 0 usecs [ 1.360965] calling noop_init+0x0/0x14 @ 1 [ 1.360965] io scheduler noop registered [ 1.360965] initcall noop_init+0x0/0x14 returned 0 after 0 usecs [ 1.360965] calling deadline_init+0x0/0x14 @ 1 [ 1.360965] io scheduler deadline registered [ 1.360965] initcall deadline_init+0x0/0x14 returned 0 after 0 usecs [ 1.360965] calling cfq_init+0x0/0xb3 @ 1 [ 1.360965] io scheduler cfq registered (default) [ 1.360965] initcall cfq_init+0x0/0xb3 returned 0 after 0 usecs [ 1.360965] calling test_kstrtox_init+0x0/0x99a @ 1 [ 1.360965] initcall test_kstrtox_init+0x0/0x99a returned -22 after 0 usecs [ 1.360965] initcall test_kstrtox_init+0x0/0x99a returned with error code -22 [ 1.360965] calling percpu_counter_startup+0x0/0x19 @ 1 [ 1.360965] initcall percpu_counter_startup+0x0/0x19 returned 0 after 0 usecs [ 1.360965] calling lnw_gpio_init+0x0/0x45 @ 1 [ 1.360965] initcall lnw_gpio_init+0x0/0x45 returned 0 after 0 usecs [ 1.360965] calling pci_proc_init+0x0/0x6b @ 1 [ 1.360965] initcall pci_proc_init+0x0/0x6b returned 0 after 0 usecs [ 1.360965] calling pcie_portdrv_init+0x0/0x7a @ 1 [ 1.360965] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.360965] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X [ 1.360965] pcieport 0000:00:15.0: device [1002:43a0] has invalid IRQ; check vendor BIOS [ 1.360965] pcieport 0000:00:15.0: setting latency timer to 64 [ 1.360965] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X [ 1.360965] initcall pcie_portdrv_init+0x0/0x7a returned 0 after 0 usecs [ 1.360965] calling aer_service_init+0x0/0x34 @ 1 [ 1.360965] initcall aer_service_init+0x0/0x34 returned 0 after 0 usecs [ 1.360965] calling pcie_pme_service_init+0x0/0x12 @ 1 [ 1.360965] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt [ 1.360965] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.360965] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded [ 1.360965] initcall pcie_pme_service_init+0x0/0x12 returned 0 after 0 usecs [ 1.360965] calling ioapic_init+0x0/0x1b @ 1 [ 1.360965] initcall ioapic_init+0x0/0x1b returned 0 after 0 usecs [ 1.360965] calling pci_hotplug_init+0x0/0x4e @ 1 [ 1.360965] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.360965] initcall pci_hotplug_init+0x0/0x4e returned 0 after 0 usecs [ 1.360965] calling pcied_init+0x0/0xf3 @ 1 [ 1.360965] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.360965] initcall pcied_init+0x0/0xf3 returned 0 after 0 usecs [ 1.360965] calling fb_console_init+0x0/0x124 @ 1 [ 1.360965] initcall fb_console_init+0x0/0x124 returned 0 after 0 usecs [ 1.360965] calling apple_bl_init+0x0/0x12 @ 1 [ 1.360965] initcall apple_bl_init+0x0/0x12 returned -19 after 0 usecs [ 1.360965] calling imsttfb_init+0x0/0xf5 @ 1 [ 1.360965] initcall imsttfb_init+0x0/0xf5 returned 0 after 0 usecs [ 1.360965] calling asiliantfb_init+0x0/0x34 @ 1 [ 1.360965] initcall asiliantfb_init+0x0/0x34 returned 0 after 0 usecs [ 1.360965] calling vesafb_init+0x0/0x247 @ 1 [ 1.360965] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 1.360965] vesafb: scrolling: redraw [ 1.360965] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.360965] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001780000, using 5824k, total 5824k [ 1.529572] Console: switching to colour frame buffer device 175x65 [ 1.706203] fb0: VESA VGA frame buffer device [ 1.710020] initcall vesafb_init+0x0/0x247 returned 0 after 341796 usecs [ 1.710024] calling efifb_init+0x0/0x1f4 @ 1 [ 1.710031] initcall efifb_init+0x0/0x1f4 returned -19 after 0 usecs [ 1.710033] calling intel_idle_init+0x0/0x38b @ 1 [ 1.710035] initcall intel_idle_init+0x0/0x38b returned -19 after 0 usecs [ 1.710037] calling acpi_reserve_resources+0x0/0xeb @ 1 [ 1.710039] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 usecs [ 1.710041] calling irqrouter_init_ops+0x0/0x26 @ 1 [ 1.710043] initcall irqrouter_init_ops+0x0/0x26 returned 0 after 0 usecs [ 1.710045] calling acpi_ac_init+0x0/0x51 @ 1 [ 1.710046] initcall acpi_ac_init+0x0/0x51 returned -19 after 0 usecs [ 1.710048] calling acpi_button_init+0x0/0x12 @ 1 [ 1.710049] initcall acpi_button_init+0x0/0x12 returned -19 after 0 usecs [ 1.710051] calling acpi_fan_init+0x0/0x18 @ 1 [ 1.710052] initcall acpi_fan_init+0x0/0x18 returned -19 after 0 usecs [ 1.710053] calling acpi_pci_slot_init+0x0/0x20 @ 1 [ 1.710055] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 0 usecs [ 1.710057] calling acpi_processor_init+0x0/0xcd @ 1 [ 1.710058] initcall acpi_processor_init+0x0/0xcd returned 0 after 0 usecs [ 1.710060] calling acpi_container_init+0x0/0x4a @ 1 [ 1.710061] initcall acpi_container_init+0x0/0x4a returned -19 after 0 usecs [ 1.710063] calling acpi_thermal_init+0x0/0x42 @ 1 [ 1.710065] initcall acpi_thermal_init+0x0/0x42 returned -19 after 0 usecs [ 1.710066] calling acpi_battery_init+0x0/0x16 @ 1 [ 1.710078] initcall acpi_battery_init+0x0/0x16 returned 0 after 0 usecs [ 1.710079] calling acpi_smb_hc_init+0x0/0x18 @ 1 [ 1.710082] initcall acpi_smb_hc_init+0x0/0x18 returned -19 after 0 usecs [ 1.710083] calling acpi_sbs_init+0x0/0x62 @ 1 [ 1.710085] initcall acpi_sbs_init+0x0/0x62 returned -19 after 0 usecs [ 1.710086] calling erst_init+0x0/0x2d0 @ 1 [ 1.710088] initcall erst_init+0x0/0x2d0 returned 0 after 0 usecs [ 1.710090] calling xenbus_probe_initcall+0x0/0x3b @ 1 [ 1.710092] initcall xenbus_probe_initcall+0x0/0x3b returned -19 after 0 usecs [ 1.710093] calling hypervisor_subsys_init+0x0/0x25 @ 1 [ 1.710095] initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs [ 1.710097] calling hyper_sysfs_init+0x0/0xbf @ 1 [ 1.710099] initcall hyper_sysfs_init+0x0/0xbf returned -19 after 0 usecs [ 1.710101] calling pty_init+0x0/0x458 @ 1 [ 1.710070] calling 1_acpi_battery_init_async+0x0/0x3c @ 5 [ 1.710175] initcall pty_init+0x0/0x458 returned 0 after 0 usecs [ 1.710177] calling sysrq_init+0x0/0x78 @ 1 [ 1.710183] initcall sysrq_init+0x0/0x78 returned 0 after 0 usecs [ 1.710184] calling xen_hvc_init+0x0/0x144 @ 1 [ 1.710186] initcall xen_hvc_init+0x0/0x144 returned -19 after 0 usecs [ 1.710188] calling serial8250_init+0x0/0x190 @ 1 [ 1.710189] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.712557] initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 0 usecs [ 1.730018] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.340014] Switching to clocksource tsc [ 4.239275] initcall serial8250_init+0x0/0x190 returned 0 after 2469992 usecs [ 4.239278] calling serial8250_pnp_init+0x0/0x12 @ 1 [ 4.239285] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 4 usecs [ 4.239287] calling serial8250_pci_init+0x0/0x1b @ 1 [ 4.239313] initcall serial8250_pci_init+0x0/0x1b returned 0 after 23 usecs [ 4.239315] calling init_kgdboc+0x0/0x16 @ 1 [ 4.239319] initcall init_kgdboc+0x0/0x16 returned 0 after 1 usecs [ 4.239321] calling rand_initialize+0x0/0x40 @ 1 [ 4.239332] initcall rand_initialize+0x0/0x40 returned 0 after 8 usecs [ 4.239334] calling ttyprintk_init+0x0/0x156 @ 1 [ 4.239364] initcall ttyprintk_init+0x0/0x156 returned 0 after 27 usecs [ 4.239366] calling hpet_init+0x0/0x6a @ 1 [ 4.239400] initcall hpet_init+0x0/0x6a returned -19 after 30 usecs [ 4.239402] calling agp_init+0x0/0x26 @ 1 [ 4.239404] Linux agpgart interface v0.103 [ 4.240152] initcall agp_init+0x0/0x26 returned 0 after 731 usecs [ 4.240154] calling agp_amd64_mod_init+0x0/0x22 @ 1 [ 4.240156] initcall agp_amd64_mod_init+0x0/0x22 returned -19 after 0 usecs [ 4.240158] calling agp_intel_init+0x0/0x29 @ 1 [ 4.240169] initcall agp_intel_init+0x0/0x29 returned 0 after 8 usecs [ 4.240170] calling agp_via_init+0x0/0x29 @ 1 [ 4.240179] initcall agp_via_init+0x0/0x29 returned 0 after 6 usecs [ 4.240181] calling cn_proc_init+0x0/0x3d @ 1 [ 4.240184] initcall cn_proc_init+0x0/0x3d returned 0 after 0 usecs [ 4.240186] calling topology_sysfs_init+0x0/0x5c @ 1 [ 4.240200] initcall topology_sysfs_init+0x0/0x5c returned 0 after 11 usecs [ 4.240202] calling brd_init+0x0/0x1a4 @ 1 [ 4.240744] brd: module loaded [ 4.241298] initcall brd_init+0x0/0x1a4 returned 0 after 1069 usecs [ 4.241300] calling loop_init+0x0/0x20a @ 1 [ 4.241568] loop: module loaded [ 4.242136] initcall loop_init+0x0/0x20a returned 0 after 815 usecs [ 4.242138] calling pkt_init+0x0/0x1b1 @ 1 [ 4.242171] initcall pkt_init+0x0/0x1b1 returned 0 after 29 usecs [ 4.242173] calling htcpld_core_init+0x0/0x2b @ 1 [ 4.242188] initcall htcpld_core_init+0x0/0x2b returned -19 after 12 usecs [ 4.242190] calling wm8994_i2c_init+0x0/0x33 @ 1 [ 4.242195] initcall wm8994_i2c_init+0x0/0x33 returned 0 after 3 usecs [ 4.242197] calling adp5520_init+0x0/0x14 @ 1 [ 4.242204] initcall adp5520_init+0x0/0x14 returned 0 after 5 usecs [ 4.242206] calling mac_hid_init+0x0/0x22 @ 1 [ 4.242213] initcall mac_hid_init+0x0/0x22 returned 0 after 4 usecs [ 4.242215] calling scsi_dh_init+0x0/0x56 @ 1 [ 4.242217] initcall scsi_dh_init+0x0/0x56 returned 0 after 0 usecs [ 4.242219] calling init_sd+0x0/0x131 @ 1 [ 4.242239] initcall init_sd+0x0/0x131 returned 0 after 17 usecs [ 4.242241] calling init_sr+0x0/0x46 @ 1 [ 4.242246] initcall init_sr+0x0/0x46 returned 0 after 3 usecs [ 4.242248] calling init_sg+0x0/0x122 @ 1 [ 4.242259] initcall init_sg+0x0/0x122 returned 0 after 9 usecs [ 4.242261] calling adma_ata_init+0x0/0x1b @ 1 [ 4.242271] initcall adma_ata_init+0x0/0x1b returned 0 after 8 usecs [ 4.242273] calling piix_init+0x0/0x29 @ 1 [ 4.242285] initcall piix_init+0x0/0x29 returned 0 after 9 usecs [ 4.242286] calling sis_init+0x0/0x1b @ 1 [ 4.242297] initcall sis_init+0x0/0x1b returned 0 after 8 usecs [ 4.242299] calling pacpi_init+0x0/0x1b @ 1 [ 4.242369] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001) [ 4.243495] pata_acpi 0000:02:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18 [ 4.244789] pata_acpi 0000:02:00.1: setting latency timer to 64 [ 4.244835] initcall pacpi_init+0x0/0x1b returned 0 after 2469 usecs [ 4.244838] calling ata_generic_init+0x0/0x1b @ 1 [ 4.244876] initcall ata_generic_init+0x0/0x1b returned 0 after 35 usecs [ 4.244878] calling marvell_init+0x0/0x69 @ 1 [ 4.244913] initcall marvell_init+0x0/0x69 returned 0 after 32 usecs [ 4.244915] calling davicom_init+0x0/0x5e @ 1 [ 4.244926] initcall davicom_init+0x0/0x5e returned 0 after 8 usecs [ 4.244927] calling cicada_init+0x0/0x3c @ 1 [ 4.244935] initcall cicada_init+0x0/0x3c returned 0 after 5 usecs [ 4.244937] calling lxt_init+0x0/0x5e @ 1 [ 4.244947] initcall lxt_init+0x0/0x5e returned 0 after 7 usecs [ 4.244949] calling qs6612_init+0x0/0x12 @ 1 [ 4.244953] initcall qs6612_init+0x0/0x12 returned 0 after 2 usecs [ 4.244955] calling smsc_init+0x0/0xa6 @ 1 [ 4.244973] initcall smsc_init+0x0/0xa6 returned 0 after 16 usecs [ 4.244975] calling vsc82xx_init+0x0/0x3c @ 1 [ 4.244984] initcall vsc82xx_init+0x0/0x3c returned 0 after 6 usecs [ 4.244986] calling broadcom_init+0x0/0x18e @ 1 [ 4.245025] initcall broadcom_init+0x0/0x18e returned 0 after 35 usecs [ 4.245026] calling icplus_init+0x0/0x29 @ 1 [ 4.245036] initcall icplus_init+0x0/0x29 returned 0 after 7 usecs [ 4.245038] calling realtek_init+0x0/0x12 @ 1 [ 4.245043] initcall realtek_init+0x0/0x12 returned 0 after 3 usecs [ 4.245045] calling et1011c_init+0x0/0x12 @ 1 [ 4.245050] initcall et1011c_init+0x0/0x12 returned 0 after 3 usecs [ 4.245052] calling fixed_mdio_bus_init+0x0/0x100 @ 1 [ 4.245071] Fixed MDIO Bus: probed [ 4.245678] initcall fixed_mdio_bus_init+0x0/0x100 returned 0 after 610 usecs [ 4.245680] calling mdio_gpio_init+0x0/0x12 @ 1 [ 4.245687] initcall mdio_gpio_init+0x0/0x12 returned 0 after 4 usecs [ 4.245689] calling ns_init+0x0/0x12 @ 1 [ 4.245694] initcall ns_init+0x0/0x12 returned 0 after 3 usecs [ 4.245696] calling ste10Xp_init+0x0/0x22 @ 1 [ 4.245705] initcall ste10Xp_init+0x0/0x22 returned 0 after 6 usecs [ 4.245707] calling net_olddevs_init+0x0/0x9e @ 1 [ 4.245711] initcall net_olddevs_init+0x0/0x9e returned 0 after 2 usecs [ 4.245713] calling ppp_init+0x0/0xe4 @ 1 [ 4.245714] PPP generic driver version 2.4.2 [ 4.246500] initcall ppp_init+0x0/0xe4 returned 0 after 767 usecs [ 4.246502] calling tun_init+0x0/0x93 @ 1 [ 4.246503] tun: Universal TUN/TAP device driver, 1.6 [ 4.247401] tun: (C) 1999-2004 Max Krasnyansky [ 4.248517] initcall tun_init+0x0/0x93 returned 0 after 1968 usecs [ 4.248519] calling cdrom_init+0x0/0xd @ 1 [ 4.248529] initcall cdrom_init+0x0/0xd returned 0 after 8 usecs [ 4.248531] calling mon_init+0x0/0x108 @ 1 [ 4.248555] initcall mon_init+0x0/0x108 returned 0 after 22 usecs [ 4.248557] calling ehci_hcd_init+0x0/0x78 @ 1 [ 4.248558] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.249800] ehci_hcd 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 4.251146] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 4.252122] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 4.289264] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.290920] QUIRK: Enable AMD PLL fix [ 4.290928] ehci_hcd 0000:00:12.2: debug port 1 [ 4.291824] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe4ff800 [ 4.309261] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 4.310394] hub 1-0:1.0: USB hub found [ 4.311086] hub 1-0:1.0: 5 ports detected [ 4.311984] ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 4.313317] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 4.314289] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 4.369264] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.370924] ehci_hcd 0000:00:13.2: debug port 1 [ 4.371816] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe4ff400 [ 4.389263] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 4.390383] hub 2-0:1.0: USB hub found [ 4.391072] hub 2-0:1.0: 5 ports detected [ 4.391961] ehci_hcd 0000:00:16.2: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 4.393293] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 4.394262] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 4.439266] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.440938] ehci_hcd 0000:00:16.2: debug port 1 [ 4.441837] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe4ff000 [ 4.509261] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 4.560268] hub 3-0:1.0: USB hub found [ 4.610826] hub 3-0:1.0: 4 ports detected [ 4.660803] initcall ehci_hcd_init+0x0/0x78 returned 0 after 402575 usecs [ 4.660806] calling ohci_hcd_mod_init+0x0/0x54 @ 1 [ 4.660807] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.711324] ohci_hcd 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 4.762533] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 4.812963] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 4.899284] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe4fe000 [ 5.013343] hub 4-0:1.0: USB hub found [ 5.063834] hub 4-0:1.0: 5 ports detected [ 5.114288] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 5.165219] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 5.215298] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 5.289290] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe4fd000 [ 5.389275] Clocksource tsc unstable (delta = 550021267 ns) [ 5.393355] hub 5-0:1.0: USB hub found [ 5.393360] hub 5-0:1.0: 5 ports detected [ 5.393478] ohci_hcd 0000:00:14.5: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 5.393489] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 5.393514] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 5.680675] Switching to clocksource jiffies [ 5.699296] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe4fc000 [ 5.739291] usb 3-4: new high speed USB device number 2 using ehci_hcd [ 5.763362] hub 6-0:1.0: USB hub found [ 5.763401] hub 6-0:1.0: 2 ports detected [ 5.763487] ohci_hcd 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 5.763498] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 5.763518] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 6.124390] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe4f3000 [ 6.124406] usb 4-4: new low speed USB device number 2 using ohci_hcd [ 6.198447] hub 7-0:1.0: USB hub found [ 6.204430] hub 7-0:1.0: 4 ports detected [ 6.214457] initcall ohci_hcd_mod_init+0x0/0x54 returned 0 after 1517141 usecs [ 6.214457] calling uhci_hcd_init+0x0/0xc9 @ 1 [ 6.214457] uhci_hcd: USB Universal Host Controller Interface driver [ 6.264403] initcall uhci_hcd_init+0x0/0xc9 returned 0 after 48828 usecs [ 6.264405] calling i8042_init+0x0/0x3d3 @ 1 [ 6.264418] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 6.314434] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.314434] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.324437] initcall i8042_init+0x0/0x3d3 returned 0 after 68359 usecs [ 6.324440] calling mousedev_init+0x0/0x8d @ 1 [ 6.324484] mousedev: PS/2 mouse device common for all mice [ 6.334371] initcall mousedev_init+0x0/0x8d returned 0 after 0 usecs [ 6.334375] calling evdev_init+0x0/0x12 @ 1 [ 6.334380] initcall evdev_init+0x0/0x12 returned 0 after 0 usecs [ 6.334385] calling atkbd_init+0x0/0x27 @ 1 [ 6.334418] initcall atkbd_init+0x0/0x27 returned 0 after 0 usecs [ 6.334420] calling uinput_init+0x0/0x12 @ 1 [ 6.334489] initcall uinput_init+0x0/0x12 returned 0 after 0 usecs [ 6.334491] calling cmos_init+0x0/0x6a @ 1 [ 6.334556] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 6.384478] rtc0: alarms up to one day, 114 bytes nvram [ 6.434519] initcall cmos_init+0x0/0x6a returned 0 after 87890 usecs [ 6.434521] calling dm_init+0x0/0x46 @ 1 [ 6.434580] device-mapper: uevent: version 1.0.3 [ 6.484465] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 6.494365] initcall dm_init+0x0/0x46 returned 0 after 58593 usecs [ 6.494367] calling dm_multipath_init+0x0/0x127 @ 1 [ 6.494388] device-mapper: multipath: version 1.3.0 loaded [ 6.504363] initcall dm_multipath_init+0x0/0x127 returned 0 after 9765 usecs [ 6.504365] calling dm_rr_init+0x0/0x3f @ 1 [ 6.504366] device-mapper: multipath round-robin: version 1.0.0 loaded [ 6.514362] initcall dm_rr_init+0x0/0x3f returned 0 after 9765 usecs [ 6.514364] calling dm_snapshot_init+0x0/0x20f @ 1 [ 6.514381] initcall dm_snapshot_init+0x0/0x20f returned 0 after 0 usecs [ 6.514383] calling dm_mirror_init+0x0/0x79 @ 1 [ 6.514407] initcall dm_mirror_init+0x0/0x79 returned 0 after 0 usecs [ 6.514409] calling dm_dirty_log_init+0x0/0x5a @ 1 [ 6.514411] initcall dm_dirty_log_init+0x0/0x5a returned 0 after 0 usecs [ 6.514413] calling cpufreq_stats_init+0x0/0x9d @ 1 [ 6.514416] initcall cpufreq_stats_init+0x0/0x9d returned 0 after 0 usecs [ 6.514418] calling cpufreq_gov_powersave_init+0x0/0x12 @ 1 [ 6.514421] initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 usecs [ 6.514423] calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 [ 6.514425] initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs [ 6.514427] calling cpufreq_gov_dbs_init+0x0/0x5e @ 1 [ 6.514429] initcall cpufreq_gov_dbs_init+0x0/0x5e returned 0 after 0 usecs [ 6.514431] calling cpufreq_gov_dbs_init+0x0/0x12 @ 1 [ 6.514433] initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 usecs [ 6.514435] calling init_ladder+0x0/0x12 @ 1 [ 6.514437] cpuidle: using governor ladder [ 6.524362] initcall init_ladder+0x0/0x12 returned 0 after 9765 usecs [ 6.524364] calling init_menu+0x0/0x12 @ 1 [ 6.524365] cpuidle: using governor menu [ 6.534362] initcall init_menu+0x0/0x12 returned 0 after 9765 usecs [ 6.534363] calling efivars_init+0x0/0xf0 @ 1 [ 6.534364] EFI Variables Facility v0.08 2004-May-17 [ 6.544362] initcall efivars_init+0x0/0xf0 returned 0 after 9765 usecs [ 6.544364] calling staging_init+0x0/0x8 @ 1 [ 6.544365] initcall staging_init+0x0/0x8 returned 0 after 0 usecs [ 6.544367] calling llc_init+0x0/0x20 @ 1 [ 6.544369] initcall llc_init+0x0/0x20 returned 0 after 0 usecs [ 6.544371] calling snap_init+0x0/0x38 @ 1 [ 6.544373] initcall snap_init+0x0/0x38 returned 0 after 0 usecs [ 6.544375] calling rif_init+0x0/0x85 @ 1 [ 6.544384] initcall rif_init+0x0/0x85 returned 0 after 0 usecs [ 6.544386] calling blackhole_module_init+0x0/0x12 @ 1 [ 6.544388] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs [ 6.544390] calling init_cgroup_cls+0x0/0x3c @ 1 [ 6.544392] initcall init_cgroup_cls+0x0/0x3c returned 0 after 0 usecs [ 6.544394] calling sysctl_ipv4_init+0x0/0x87 @ 1 [ 6.544488] initcall sysctl_ipv4_init+0x0/0x87 returned 0 after 0 usecs [ 6.544489] calling init_syncookies+0x0/0x19 @ 1 [ 6.544506] initcall init_syncookies+0x0/0x19 returned 0 after 0 usecs [ 6.544508] calling ipv4_netfilter_init+0x0/0x20 @ 1 [ 6.544510] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs [ 6.544512] calling inet_diag_init+0x0/0x7c @ 1 [ 6.544516] initcall inet_diag_init+0x0/0x7c returned 0 after 0 usecs [ 6.544517] calling tcp_diag_init+0x0/0x12 @ 1 [ 6.544519] initcall tcp_diag_init+0x0/0x12 returned 0 after 0 usecs [ 6.544521] calling cubictcp_register+0x0/0x6c @ 1 [ 6.544522] TCP cubic registered [ 6.554362] initcall cubictcp_register+0x0/0x6c returned 0 after 9765 usecs [ 6.554364] calling inet6_init+0x0/0x2a6 @ 1 [ 6.554442] NET: Registered protocol family 10 [ 6.564662] initcall inet6_init+0x0/0x2a6 returned 0 after 9765 usecs [ 6.564664] calling packet_init+0x0/0x47 @ 1 [ 6.564665] NET: Registered protocol family 17 [ 6.574364] initcall packet_init+0x0/0x47 returned 0 after 9765 usecs [ 6.574365] calling dsa_init_module+0x0/0x14 @ 1 [ 6.574367] initcall dsa_init_module+0x0/0x14 returned 0 after 0 usecs [ 6.574369] calling edsa_init_module+0x0/0x14 @ 1 [ 6.574371] initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs [ 6.574373] calling trailer_init_module+0x0/0x14 @ 1 [ 6.574374] initcall trailer_init_module+0x0/0x14 returned 0 after 0 usecs [ 6.574376] calling mv88e6060_init+0x0/0x14 @ 1 [ 6.574378] initcall mv88e6060_init+0x0/0x14 returned 0 after 0 usecs [ 6.574380] calling mv88e6123_61_65_init+0x0/0x14 @ 1 [ 6.574382] initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs [ 6.574383] calling mv88e6131_init+0x0/0x14 @ 1 [ 6.574385] initcall mv88e6131_init+0x0/0x14 returned 0 after 0 usecs [ 6.574387] calling dsa_init_module+0x0/0x12 @ 1 [ 6.574397] initcall dsa_init_module+0x0/0x12 returned 0 after 0 usecs [ 6.574399] calling dcbnl_init+0x0/0x47 @ 1 [ 6.574401] initcall dcbnl_init+0x0/0x47 returned 0 after 0 usecs [ 6.574403] calling init_dns_resolver+0x0/0xfe @ 1 [ 6.574404] Registering the dns_resolver key type [ 6.584366] initcall init_dns_resolver+0x0/0xfe returned 0 after 9765 usecs [ 6.584368] calling rio_init_mports+0x0/0x6e @ 1 [ 6.584370] initcall rio_init_mports+0x0/0x6e returned 0 after 0 usecs [ 6.584372] calling tboot_late_init+0x0/0x208 @ 1 [ 6.584374] initcall tboot_late_init+0x0/0x208 returned 0 after 0 usecs [ 6.584375] calling mcheck_debugfs_init+0x0/0x3d @ 1 [ 6.584380] initcall mcheck_debugfs_init+0x0/0x3d returned 0 after 0 usecs [ 6.584382] calling severities_debugfs_init+0x0/0x3b @ 1 [ 6.584384] initcall severities_debugfs_init+0x0/0x3b returned 0 after 0 usecs [ 6.584387] calling powernowk8_init+0x0/0x1cc @ 1 [ 6.584451] powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00) [ 6.594507] powernow-k8: Core Performance Boosting: on. [ 6.604363] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 6.604364] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 6.614364] initcall powernowk8_init+0x0/0x1cc returned -19 after 29296 usecs [ 6.614366] calling acpi_cpufreq_init+0x0/0xd1 @ 1 [ 6.614368] initcall acpi_cpufreq_init+0x0/0xd1 returned 0 after 0 usecs [ 6.614370] calling centrino_init+0x0/0x2e @ 1 [ 6.614371] initcall centrino_init+0x0/0x2e returned -19 after 0 usecs [ 6.614373] calling hpet_insert_resource+0x0/0x23 @ 1 [ 6.614375] initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs [ 6.614377] initcall hpet_insert_resource+0x0/0x23 returned with error code 1 [ 6.624362] calling update_mp_table+0x0/0x46d @ 1 [ 6.624365] initcall update_mp_table+0x0/0x46d returned 0 after 0 usecs [ 6.624367] calling lapic_insert_resource+0x0/0x3f @ 1 [ 6.624370] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs [ 6.624373] calling io_apic_bug_finalize+0x0/0x1b @ 1 [ 6.624375] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs [ 6.624377] calling check_early_ioremap_leak+0x0/0x50 @ 1 [ 6.624379] initcall check_early_ioremap_leak+0x0/0x50 returned 0 after 0 usecs [ 6.624382] calling pat_memtype_list_init+0x0/0x32 @ 1 [ 6.624385] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 0 usecs [ 6.624387] calling sched_init_debug+0x0/0x24 @ 1 [ 6.624390] initcall sched_init_debug+0x0/0x24 returned 0 after 0 usecs [ 6.624393] calling init_oops_id+0x0/0x40 @ 1 [ 6.624396] initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs [ 6.624399] calling printk_late_init+0x0/0x50 @ 1 [ 6.624401] initcall printk_late_init+0x0/0x50 returned 0 after 0 usecs [ 6.624403] calling pm_qos_power_init+0x0/0xdf @ 1 [ 6.624449] initcall pm_qos_power_init+0x0/0xdf returned 0 after 0 usecs [ 6.624452] calling test_suspend+0x0/0x1b6 @ 1 [ 6.624454] initcall test_suspend+0x0/0x1b6 returned 0 after 0 usecs [ 6.624456] calling software_resume+0x0/0x200 @ 1 [ 6.624457] PM: Hibernation image not present or could not be loaded. [ 6.624459] initcall software_resume+0x0/0x200 returned -2 after 0 usecs [ 6.624461] initcall software_resume+0x0/0x200 returned with error code -2 [ 6.624405] usb 4-5: new full speed USB device number 3 using ohci_hcd [ 6.634362] calling debugfs_kprobe_init+0x0/0xa0 @ 1 [ 6.634367] initcall debugfs_kprobe_init+0x0/0xa0 returned 0 after 0 usecs [ 6.634369] calling taskstats_init+0x0/0x95 @ 1 [ 6.634372] registered taskstats version 1 [ 6.644361] initcall taskstats_init+0x0/0x95 returned 0 after 9765 usecs [ 6.644363] calling clear_boot_tracer+0x0/0x2d @ 1 [ 6.644365] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs [ 6.644366] calling kdb_ftrace_register+0x0/0x2f @ 1 [ 6.644369] initcall kdb_ftrace_register+0x0/0x2f returned 0 after 0 usecs [ 6.644371] calling max_swapfiles_check+0x0/0x8 @ 1 [ 6.644373] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs [ 6.644375] calling random32_reseed+0x0/0xa2 @ 1 [ 6.644390] initcall random32_reseed+0x0/0xa2 returned 0 after 0 usecs [ 6.644391] calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 [ 6.644394] initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 0 usecs [ 6.644396] calling pci_sysfs_init+0x0/0x51 @ 1 [ 6.644634] initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 usecs [ 6.644636] calling regulator_init_complete+0x0/0x147 @ 1 [ 6.644638] initcall regulator_init_complete+0x0/0x147 returned 0 after 0 usecs [ 6.644639] calling seqgen_init+0x0/0xf @ 1 [ 6.644646] initcall seqgen_init+0x0/0xf returned 0 after 0 usecs [ 6.644648] calling late_resume_init+0x0/0x1b0 @ 1 [ 6.644650] Magic number: 11:432:994 [ 6.654383] initcall late_resume_init+0x0/0x1b0 returned 0 after 9765 usecs [ 6.654386] calling scsi_complete_async_scans+0x0/0x160 @ 1 [ 6.654388] initcall scsi_complete_async_scans+0x0/0x160 returned 0 after 0 usecs [ 6.654390] calling rtc_hctosys+0x0/0x10f @ 1 [ 6.654520] rtc_cmos rtc_cmos: setting system clock to 2011-05-04 16:58:36 UTC (1304528316) [ 6.664362] initcall rtc_hctosys+0x0/0x10f returned 0 after 9765 usecs [ 6.664364] calling edd_init+0x0/0x29f @ 1 [ 6.664365] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.674361] EDD information not available. [ 6.684365] initcall edd_init+0x0/0x29f returned -19 after 19531 usecs [ 6.684366] calling memmap_init+0x0/0x3f @ 1 [ 6.684379] initcall memmap_init+0x0/0x3f returned 0 after 0 usecs [ 6.684381] calling pci_mmcfg_late_insert_resources+0x0/0x64 @ 1 [ 6.684383] initcall pci_mmcfg_late_insert_resources+0x0/0x64 returned 1 after 0 usecs [ 6.684384] initcall pci_mmcfg_late_insert_resources+0x0/0x64 returned with error code 1 [ 6.684387] calling tcp_congestion_default+0x0/0x12 @ 1 [ 6.684389] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs [ 6.684390] calling initialize_hashrnd+0x0/0x19 @ 1 [ 6.684393] initcall initialize_hashrnd+0x0/0x19 returned 0 after 0 usecs [ 6.734382] async_waiting @ 1 [ 6.744364] async_continuing @ 1 after 0 usec [ 6.755640] Freeing unused kernel memory: 968k freed [ 6.764540] Write protecting the kernel read-only data: 10240k [ 6.775217] Freeing unused kernel memory: 264k freed [ 6.796758] Freeing unused kernel memory: 1624k freed [ 6.825713] udev[133]: starting version 167 [ 6.886342] calling jmicron_init+0x0/0x1000 [pata_jmicron] @ 179 [ 6.894454] pata_jmicron 0000:02:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18 [ 6.904394] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 6.895548] calling rtl8169_init_module+0x0/0x1000 [r8169] @ 199 [ 6.903355] calling hid_init+0x0/0x67 [hid] @ 229 [ 6.900071] calling drm_core_init+0x0/0x1000 [drm] @ 181 [ 6.900071] [drm] Initialized drm 1.1.0 20060810 [ 6.904615] scsi0 : pata_jmicron [ 6.904615] initcall hid_init+0x0/0x67 [hid] returned 0 after 0 usecs [ 6.904615] scsi1 : pata_jmicron [ 6.904615] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 18 [ 6.904615] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 18 [ 6.904615] initcall jmicron_init+0x0/0x1000 [pata_jmicron] returned 0 after 19531 usecs [ 6.924521] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.924553] r8169 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 6.924593] r8169 0000:04:00.0: setting latency timer to 64 [ 6.924599] r8169 0000:04:00.0: (unregistered net_device): unknown MAC, using family default [ 6.924657] r8169 0000:04:00.0: irq 42 for MSI/MSI-X [ 6.924979] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90001d5c000, 48:5b:39:02:5a:1c, XID 0c100000 IRQ 42 [ 7.354468] initcall drm_core_init+0x0/0x1000 [drm] returned 0 after 439453 usecs [ 7.367490] calling hid_init+0x0/0x1000 [usbhid] @ 230 [ 7.368404] calling uas_init+0x0/0x30 [uas] @ 235 [ 7.368432] usbcore: registered new interface driver uas [ 7.414442] initcall uas_init+0x0/0x30 [uas] returned 0 after 48828 usecs [ 7.410620] calling ahci_init+0x0/0x1000 [ahci] @ 178 [ 7.410628] calling fw_core_init+0x0/0x1000 [firewire_core] @ 223 [ 7.414442] initcall fw_core_init+0x0/0x1000 [firewire_core] returned 0 after 0 usecs [ 7.421123] ahci 0000:00:11.0: version 3.0 [ 7.421213] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 19 [ 7.423548] calling fw_ohci_init+0x0/0x1000 [firewire_ohci] @ 223 [ 7.423570] calling usb_stor_init+0x0/0x1000 [usb_storage] @ 235 [ 7.423573] Initializing USB Mass Storage driver... [ 7.423579] calling ttm_init+0x0/0x1000 [ttm] @ 181 [ 7.424442] ahci 0000:00:11.0: irq 43 for MSI/MSI-X [ 7.424381] initcall ttm_init+0x0/0x1000 [ttm] returned 0 after 0 usecs [ 7.424546] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 7.424549] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 7.425131] firewire_ohci 0000:03:07.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 7.425136] Calling fixup hook: quirk_via_vlink+0x0/0xd0 [ 7.434373] scsi2 : ahci [ 7.434443] scsi3 : ahci [ 7.434490] scsi4 : ahci [ 7.434524] scsi5 : ahci [ 7.434524] scsi6 : ahci [ 7.434524] scsi7 : ahci [ 7.434524] ata3: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd00 irq 43 [ 7.434524] ata4: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd80 irq 43 [ 7.434524] ata5: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe00 irq 43 [ 7.434524] ata6: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe80 irq 43 [ 7.434524] ata7: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4fff00 irq 43 [ 7.434524] ata8: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4fff80 irq 43 [ 7.434524] ahci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 7.434524] ahci 0000:02:00.0: JMB361 has only one port [ 7.434524] ahci 0000:02:00.0: forcing port_map 0x3 -> 0x1 [ 7.454403] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 7.454406] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 7.454412] ahci 0000:02:00.0: setting latency timer to 64 [ 7.454588] scsi8 : ahci [ 7.454588] scsi9 : ahci [ 7.454588] ata9: SATA max UDMA/133 abar m8192@0xfe7fe000 port 0xfe7fe100 irq 18 [ 7.454588] ata10: DUMMY [ 7.454588] initcall ahci_init+0x0/0x1000 [ahci] returned 0 after 39062 usecs [ 7.474458] usb 5-1: new full speed USB device number 2 using ohci_hcd [ 7.494433] firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 7.494435] initcall fw_ohci_init+0x0/0x1000 [firewire_ohci] returned 0 after 68359 usecs [ 7.774395] ata8: SATA link down (SStatus 0 SControl 300) [ 7.784420] ata7: SATA link down (SStatus 0 SControl 300) [ 7.814411] ata9: SATA link down (SStatus 0 SControl 300) [ 7.984390] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.984417] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.984429] ata3.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 7.984429] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 7.984429] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 7.984429] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 7.985267] ata3.00: configured for UDMA/133 [ 7.985267] ata4.00: configured for UDMA/133 [ 7.985267] scsi 2:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 7.985267] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.985267] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.985267] sd 2:0:0:0: [sda] Write Protect is off [ 7.985267] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.985267] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.985267] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 7.985267] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.985267] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 7.985267] sd 3:0:0:0: [sdb] Write Protect is off [ 7.985267] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.985267] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.994425] firewire_core: created device fw0: GUID 001e8c0000cb0c9c, S400 [ 7.994425] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.994394] sda: sda1 [ 7.999118] ata6.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133 [ 8.004374] sdb: sdb1 [ 8.004374] ata6.00: configured for UDMA/133 [ 8.024384] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8.024396] ata5.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 8.024396] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 8.024396] ata5.00: configured for UDMA/133 [ 8.024404] scsi 4:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 8.024461] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 8.024439] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 8.024495] sd 4:0:0:0: [sdc] Write Protect is off [ 8.024495] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 8.024499] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.034380] scsi 5:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5 [ 8.035392] sdc: sdc1 sdc2 [ 8.044394] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.044394] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.044443] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 8.044479] sr 5:0:0:0: Attached scsi generic sg3 type 5 [ 10.724365] sd 2:0:0:0: [sda] Attached SCSI disk [ 10.731878] scsi10 : usb-storage 3-4:1.0 [ 10.731878] sd 4:0:0:0: [sdc] Attached SCSI disk [ 10.731791] sd 3:0:0:0: [sdb] Attached SCSI disk [ 10.731878] usbcore: registered new interface driver usb-storage [ 10.731878] USB Mass Storage support registered. [ 10.731878] initcall usb_stor_init+0x0/0x1000 [usb_storage] returned 0 after 3222656 usecs [ 11.014498] calling radeon_init+0x0/0x1000 [radeon] @ 181 [ 11.014501] [drm] radeon defaulting to kernel modesetting. [ 11.014956] input: HID 046a:0050 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input0 [ 11.014956] generic-usb 0003:046A:0050.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0050] on usb-0000:00:12.0-4/input0 [ 11.014956] input: HID 046a:0050 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/input/input1 [ 11.014956] generic-usb 0003:046A:0050.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0050] on usb-0000:00:12.0-4/input1 [ 11.015149] input: HID 046a:0050 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/input/input2 [ 11.015149] generic-usb 0003:046A:0050.0003: input,hidraw2: USB HID v1.11 Mouse [HID 046a:0050] on usb-0000:00:12.0-4/input2 [ 11.015149] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input3 [ 11.015149] generic-usb 0003:046D:C52F.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-5/input0 [ 11.015149] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input4 [ 11.015149] generic-usb 0003:046D:C52F.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input1 [ 11.015149] usbcore: registered new interface driver usbhid [ 11.015149] usbhid: USB HID core driver [ 11.015149] initcall hid_init+0x0/0x1000 [usbhid] returned 0 after 3564453 usecs [ 11.024427] [drm] radeon kernel modesetting enabled. [ 11.034407] initcall rtl8169_init_module+0x0/0x1000 [r8169] returned 0 after 4033203 usecs [ 11.034491] checking generic (d0000000 5b0000) vs hw (d0000000 10000000) [ 11.034491] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver [ 11.044489] Console: switching to colour dummy device 80x25 [ 11.044773] radeon 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 11.044779] radeon 0000:01:05.0: setting latency timer to 64 [ 11.044895] [drm] initializing kernel modesetting (RS880 0x1002:0x9714). [ 11.044920] [drm] register mmio base: 0xFE6F0000 [ 11.044922] [drm] register mmio size: 65536 [ 11.045545] ATOM BIOS: B43106 [ 11.045563] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used) [ 11.045568] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 11.049016] [drm] Detected VRAM RAM=368M, BAR=256M [ 11.049026] [drm] RAM width 32bits DDR [ 11.049056] [TTM] Zone kernel: Available graphics memory: 3967448 kiB. [ 11.049056] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 11.049056] [TTM] Initializing pool allocator. [ 11.049056] [drm] radeon: 368M of VRAM memory ready [ 11.049056] [drm] radeon: 512M of GTT memory ready. [ 11.049056] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 11.049056] [drm] Driver supports precise vblank timestamp query. [ 11.049056] [drm] radeon: irq initialized. [ 11.049056] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 11.049056] [drm] Loading RS780 Microcode [ 11.057339] radeon 0000:01:05.0: WB enabled [ 11.084388] md: bind [ 11.089352] [drm] ring test succeeded in 1 usecs [ 11.089439] [drm] radeon: ib pool ready. [ 11.089487] [drm] ib test succeeded in 0 usecs [ 11.089489] [drm] Enabling audio support [ 11.089495] failed to evaluate ATIF got AE_BAD_PARAMETER [ 11.089672] [drm] Radeon Display Connectors [ 11.089675] [drm] Connector 0: [ 11.089677] [drm] VGA [ 11.089680] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 11.089683] [drm] Encoders: [ 11.089685] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 11.089688] [drm] Connector 1: [ 11.089690] [drm] HDMI-A [ 11.089691] [drm] HPD3 [ 11.089694] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 11.089697] [drm] Encoders: [ 11.089699] [drm] DFP1: INTERNAL_KLDSCP_LVTMA [ 11.114389] md: bind [ 11.115585] calling raid0_init+0x0/0x1000 [raid0] @ 301 [ 11.115588] md: raid0 personality registered for level 0 [ 11.115594] initcall raid0_init+0x0/0x1000 [raid0] returned 0 after 0 usecs [ 11.115662] bio: create slab at 1 [ 11.115662] md/raid0:md0: looking at sda1 [ 11.115662] md/raid0:md0: comparing sda1(1953519488) with sda1(1953519488) [ 11.115662] md/raid0:md0: END [ 11.115662] md/raid0:md0: ==> UNIQUE [ 11.115662] md/raid0:md0: 1 zones [ 11.115662] md/raid0:md0: looking at sdb1 [ 11.115662] md/raid0:md0: comparing sdb1(1953521536) with sda1(1953519488) [ 11.115662] md/raid0:md0: NOT EQUAL [ 11.115662] md/raid0:md0: comparing sdb1(1953521536) with sdb1(1953521536) [ 11.115662] md/raid0:md0: END [ 11.115662] md/raid0:md0: ==> UNIQUE [ 11.115662] md/raid0:md0: 2 zones [ 11.115662] md/raid0:md0: FINAL 2 zones [ 11.115662] md/raid0:md0: zone 1 [ 11.115662] md/raid0:md0: checking sdb1 ... contained as device 0 [ 11.115662] md/raid0:md0: (1953521536) is smallest!. [ 11.115662] md/raid0:md0: checking sda1 ... nope. [ 11.115662] md/raid0:md0: zone->nb_dev: 1, sectors: 2048 [ 11.115662] md/raid0:md0: current zone start: 1953521536 [ 11.115662] md/raid0:md0: done. [ 11.115662] md/raid0:md0: md_size is 3907041024 sectors. [ 11.115662] ******* md0 configuration ********* [ 11.115662] zone0=[sdb1/sda1/] [ 11.115662] zone offset=0kb device offset=0kb size=1953519488kb [ 11.115662] zone1=[sdb1/] [ 11.115662] zone offset=1953519488kb device offset=976759744kb size=1024kb [ 11.115662] ********************************** [ 11.115662] [ 11.115662] md0: detected capacity change from 0 to 2000405004288 [ 11.115662] md0: unknown partition table [ 11.201448] [drm] radeon: power management initialized [ 11.336321] [drm] fb mappable at 0xD0141000 [ 11.336326] [drm] vram apper at 0xD0000000 [ 11.336328] [drm] size 8294400 [ 11.336330] [drm] fb depth is 24 [ 11.336332] [drm] pitch is 7680 [ 11.336389] fbcon: radeondrmfb (fb0) is primary device [ 11.364451] Console: switching to colour frame buffer device 240x67 [ 11.381788] fb0: radeondrmfb frame buffer device [ 11.381849] drm: registered panic notifier [ 11.381907] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0 [ 11.382002] initcall radeon_init+0x0/0x1000 [radeon] returned 0 after 351562 usecs [ 11.726308] calling uvesafb_init+0x0/0xc3 [uvesafb] @ 358 [ 11.726371] uvesafb: (C) 1988-2005, ATI Technologies Inc. , RS880, 01.00, OEM: ATI ATOMBIOS, VBE v3.0 [ 11.734733] scsi 10:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS [ 11.734733] sd 10:0:0:0: Attached scsi generic sg4 type 0 [ 11.736355] sd 10:0:0:0: [sdd] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 11.736355] sd 10:0:0:0: [sdd] Write Protect is off [ 11.736355] sd 10:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 11.736355] sd 10:0:0:0: [sdd] Assuming drive cache: write through [ 11.736355] sd 10:0:0:0: [sdd] Assuming drive cache: write through [ 11.736355] sdd: sdd1 [ 11.736355] sd 10:0:0:0: [sdd] Assuming drive cache: write through [ 11.736355] sd 10:0:0:0: [sdd] Attached SCSI removable disk [ 11.785613] uvesafb: VBIOS/hardware supports DDC2 transfers [ 11.937808] uvesafb: monitor limits: vf = 60 Hz, hf = 81 kHz, clk = 170 MHz [ 11.937814] uvesafb: scrolling: redraw [ 11.937814] uvesafb: request region 0x3c0-0x3e0 failed [ 11.937814] uvesafb: probe of uvesafb.0 failed with error -5 [ 11.937814] initcall uvesafb_init+0x0/0xc3 [uvesafb] returned 0 after 205078 usecs [ 11.937814] calling linear_init+0x0/0x1000 [linear] @ 369 [ 11.937814] md: linear personality registered for level -1 [ 11.937814] initcall linear_init+0x0/0x1000 [linear] returned 0 after 0 usecs [ 11.937814] calling multipath_init+0x0/0x1000 [multipath] @ 371 [ 11.937814] md: multipath personality registered for level -4 [ 11.937814] initcall multipath_init+0x0/0x1000 [multipath] returned 0 after 0 usecs [ 11.944362] calling raid_init+0x0/0x1000 [raid1] @ 375 [ 11.944362] md: raid1 personality registered for level 1 [ 11.944362] initcall raid_init+0x0/0x1000 [raid1] returned 0 after 0 usecs [ 11.945932] calling init_module+0x0/0x1000 [raid6_pq] @ 377 [ 12.104414] raid6: int64x1 2835 MB/s [ 12.274406] raid6: int64x2 3979 MB/s [ 12.444404] raid6: int64x4 2888 MB/s [ 12.614404] raid6: int64x8 2625 MB/s [ 12.784400] raid6: sse2x1 4509 MB/s [ 12.954395] raid6: sse2x2 7552 MB/s [ 13.124399] raid6: sse2x4 8444 MB/s [ 13.124400] raid6: using algorithm sse2x4 (8444 MB/s) [ 13.124404] initcall init_module+0x0/0x1000 [raid6_pq] returned 0 after 1162109 usecs [ 13.135276] calling calibrate_xor_blocks+0x0/0x1000 [xor] @ 377 [ 13.135279] xor: automatically using best checksumming function: generic_sse [ 13.174399] generic_sse: 13490.000 MB/sec [ 13.174400] xor: using function: generic_sse (13490.000 MB/sec) [ 13.174404] initcall calibrate_xor_blocks+0x0/0x1000 [xor] returned 0 after 48828 usecs [ 13.184435] calling async_pq_init+0x0/0x1000 [async_pq] @ 377 [ 13.184435] initcall async_pq_init+0x0/0x1000 [async_pq] returned 0 after 0 usecs [ 13.184438] calling raid5_init+0x0/0x1000 [raid456] @ 377 [ 13.184438] md: raid6 personality registered for level 6 [ 13.184438] md: raid5 personality registered for level 5 [ 13.184438] md: raid4 personality registered for level 4 [ 13.184438] initcall raid5_init+0x0/0x1000 [raid456] returned 0 after 0 usecs [ 13.186149] calling raid_init+0x0/0x1000 [raid10] @ 383 [ 13.186151] md: raid10 personality registered for level 10 [ 13.186154] initcall raid_init+0x0/0x1000 [raid10] returned 0 after 0 usecs [ 18.340765] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 21.114491] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro [ 21.764607] udev[490]: starting version 167 [ 22.354458] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 24.085977] calling shpcd_init+0x0/0x1000 [shpchp] @ 507 [ 24.085977] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 24.085977] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 24.085977] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.085977] initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 0 usecs [ 24.165444] calling snd_mem_init+0x0/0x1000 [snd_page_alloc] @ 883 [ 24.165453] initcall snd_mem_init+0x0/0x1000 [snd_page_alloc] returned 0 after 0 usecs [ 24.174635] calling init_soundcore+0x0/0x1000 [soundcore] @ 883 [ 24.174650] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 0 usecs [ 24.194927] calling i2c_piix4_init+0x0/0x1000 [i2c_piix4] @ 524 [ 24.194947] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 24.194947] initcall i2c_piix4_init+0x0/0x1000 [i2c_piix4] returned 0 after 0 usecs [ 24.195099] calling k10temp_init+0x0/0x1000 [k10temp] @ 545 [ 24.195126] initcall k10temp_init+0x0/0x1000 [k10temp] returned 0 after 0 usecs [ 24.242830] calling bt_init+0x0/0x9d [bluetooth] @ 799 [ 24.242833] Bluetooth: Core ver 2.16 [ 24.245234] NET: Registered protocol family 31 [ 24.245236] Bluetooth: HCI device and connection manager initialized [ 24.245239] Bluetooth: HCI socket layer initialized [ 24.245241] Bluetooth: L2CAP socket layer initialized [ 24.245484] Bluetooth: SCO socket layer initialized [ 24.245493] initcall bt_init+0x0/0x9d [bluetooth] returned 0 after 9765 usecs [ 24.249030] calling alsa_sound_init+0x0/0x82 [snd] @ 891 [ 24.249048] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 0 usecs [ 24.275106] calling serio_raw_init+0x0/0x1000 [serio_raw] @ 557 [ 24.275126] initcall serio_raw_init+0x0/0x1000 [serio_raw] returned 0 after 0 usecs [ 24.276503] calling parport_default_proc_register+0x0/0x1000 [parport] @ 869 [ 24.276522] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 0 usecs [ 24.295279] calling lp_init_module+0x0/0x1000 [lp] @ 869 [ 24.295305] lp: driver loaded but no devices found [ 24.295305] initcall lp_init_module+0x0/0x1000 [lp] returned 0 after 0 usecs [ 24.325803] calling psmouse_init+0x0/0x7e [psmouse] @ 557 [ 24.336315] initcall psmouse_init+0x0/0x7e [psmouse] returned 0 after 9765 usecs [ 24.345257] calling mce_amd_init+0x0/0x1000 [edac_mce_amd] @ 543 [ 24.345259] MCE: In-kernel MCE decoding enabled. [ 24.345263] initcall mce_amd_init+0x0/0x1000 [edac_mce_amd] returned 0 after 0 usecs [ 24.362955] type=1400 audit(1304528334.200:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=643 comm="apparmor_parser" [ 24.362993] type=1400 audit(1304528334.200:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=643 comm="apparmor_parser" [ 24.363026] type=1400 audit(1304528334.200:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=643 comm="apparmor_parser" [ 24.364369] type=1400 audit(1304528334.210:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=698 comm="apparmor_parser" [ 24.364369] type=1400 audit(1304528334.210:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=698 comm="apparmor_parser" [ 24.364369] type=1400 audit(1304528334.210:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=698 comm="apparmor_parser" [ 24.374913] calling sp5100_tco_init_module+0x0/0x1000 [sp5100_tco] @ 524 [ 24.374915] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 24.375015] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 24.375023] initcall sp5100_tco_init_module+0x0/0x1000 [sp5100_tco] returned 0 after 0 usecs [ 24.384445] calling joydev_init+0x0/0x1000 [joydev] @ 806 [ 24.384445] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 0 usecs [ 24.386733] calling btusb_init+0x0/0x1000 [btusb] @ 800 [ 24.386736] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 24.386762] usbcore: registered new interface driver btusb [ 24.386762] initcall btusb_init+0x0/0x1000 [btusb] returned 0 after 0 usecs [ 24.386762] calling edac_init+0x0/0x1000 [edac_core] @ 543 [ 24.386762] EDAC MC: Ver: 2.1.0 May 4 2011 [ 24.388661] initcall edac_init+0x0/0x1000 [edac_core] returned 0 after 0 usecs [ 24.415745] calling amd64_edac_init+0x0/0x1000 [amd64_edac_mod] @ 543 [ 24.415748] AMD64 EDAC driver v3.4.0 [ 24.415770] EDAC amd64: DRAM ECC enabled. [ 24.415770] EDAC amd64: F10h detected (node 0). [ 24.415770] EDAC MC: DCT0 chip selects: [ 24.415770] EDAC amd64: MC: 0: 1024MB 1: 1024MB [ 24.415770] EDAC amd64: MC: 2: 1024MB 3: 1024MB [ 24.415770] EDAC amd64: MC: 4: 0MB 5: 0MB [ 24.415770] EDAC amd64: MC: 6: 0MB 7: 0MB [ 24.415770] EDAC MC: DCT1 chip selects: [ 24.415770] EDAC amd64: MC: 0: 1024MB 1: 1024MB [ 24.415770] EDAC amd64: MC: 2: 1024MB 3: 1024MB [ 24.415770] EDAC amd64: MC: 4: 0MB 5: 0MB [ 24.415770] EDAC amd64: MC: 6: 0MB 7: 0MB [ 24.415770] EDAC amd64: using x4 syndromes. [ 24.415770] EDAC amd64: MCT channel count: 2 [ 24.415770] EDAC amd64: CS0: Unbuffered DDR3 RAM [ 24.415770] EDAC amd64: CS1: Unbuffered DDR3 RAM [ 24.415770] EDAC amd64: CS2: Unbuffered DDR3 RAM [ 24.415770] EDAC amd64: CS3: Unbuffered DDR3 RAM [ 24.415770] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2 [ 24.415770] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 24.415770] initcall amd64_edac_init+0x0/0x1000 [amd64_edac_mod] returned 0 after 0 usecs [ 24.534367] calling alsa_seq_device_init+0x0/0x1000 [snd_seq_device] @ 901 [ 24.534367] initcall alsa_seq_device_init+0x0/0x1000 [snd_seq_device] returned 0 after 0 usecs [ 24.706906] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 901 [ 24.706994] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 0 usecs [ 24.764406] calling alsa_seq_init+0x0/0x4c [snd_seq] @ 935 [ 24.764468] initcall alsa_seq_init+0x0/0x4c [snd_seq] returned 0 after 0 usecs [ 24.783308] type=1400 audit(1304528334.630:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=909 comm="apparmor_parser" [ 24.794730] type=1400 audit(1304528334.640:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=910 comm="apparmor_parser" [ 24.955244] calling alsa_seq_midi_event_init+0x0/0x1000 [snd_seq_midi_event] @ 936 [ 24.955249] initcall alsa_seq_midi_event_init+0x0/0x1000 [snd_seq_midi_event] returned 0 after 0 usecs [ 25.066494] calling alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] @ 949 [ 25.066500] initcall alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] returned 0 after 0 usecs [ 25.147303] calling alsa_seq_midi_init+0x0/0x1000 [snd_seq_midi] @ 958 [ 25.147308] initcall alsa_seq_midi_init+0x0/0x1000 [snd_seq_midi] returned 0 after 0 usecs [ 25.670378] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 984 [ 25.670390] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 0 usecs [ 25.715568] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 528 [ 25.715577] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 0 usecs [ 25.897187] calling alsa_card_azx_init+0x0/0x1000 [snd_hda_intel] @ 883 [ 25.897215] HDA Intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 25.897215] hda_intel: position_fix set to 1 for device 1043:8410 [ 26.089092] calling patch_realtek_init+0x0/0x1000 [snd_hda_codec_realtek] @ 1026 [ 26.089099] initcall patch_realtek_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 0 usecs [ 26.089210] hda_codec: ALC892: BIOS auto-probing. [ 26.098060] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 26.098164] HDA Intel 0000:01:05.1: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 26.098164] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 26.195844] calling patch_hdmi_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 1039 [ 26.195850] initcall patch_hdmi_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 0 usecs [ 26.195925] initcall alsa_card_azx_init+0x0/0x1000 [snd_hda_intel] returned 0 after 292968 usecs [ 26.686913] r8169 0000:04:00.0: eth0: link down [ 26.685291] r8169 0000:04:00.0: eth0: link down [ 26.687614] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.134435] type=1400 audit(1304528336.980:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1076 comm="apparmor_parser" [ 27.176358] calling bnep_init+0x0/0xca [bnep] @ 1082 [ 27.176358] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.176358] Bluetooth: BNEP filters: protocol multicast [ 27.176358] initcall bnep_init+0x0/0xca [bnep] returned 0 after 0 usecs [ 27.267063] type=1400 audit(1304528337.110:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1071 comm="apparmor_parser" [ 27.706871] calling rfcomm_init+0x0/0xed [rfcomm] @ 1095 [ 27.706881] Bluetooth: RFCOMM TTY layer initialized [ 27.706881] Bluetooth: RFCOMM socket layer initialized [ 27.706881] Bluetooth: RFCOMM ver 1.11 [ 27.706881] initcall rfcomm_init+0x0/0xed [rfcomm] returned 0 after 0 usecs [ 28.390631] r8169 0000:04:00.0: eth0: link up [ 28.391325] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.284381] calling ppdev_init+0x0/0x1000 [ppdev] @ 1115 [ 29.285090] ppdev: user-space parallel port driver [ 29.285090] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 0 usecs [ 29.324372] calling dm_crypt_init+0x0/0x1000 [dm_crypt] @ 1113 [ 29.324372] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 0 usecs [ 29.326369] calling parport_pc_init+0x0/0xf38 [parport_pc] @ 1118 [ 29.326639] initcall parport_pc_init+0x0/0xf38 [parport_pc] returned 0 after 0 usecs [ 29.801832] audit_printk_skb: 24 callbacks suppressed [ 29.801835] type=1400 audit(1304528339.650:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1128 comm="apparmor_parser" [ 29.801917] type=1400 audit(1304528339.650:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1128 comm="apparmor_parser" [ 30.345019] calling aes_init+0x0/0x1000 [aes_generic] @ 1199 [ 30.345030] initcall aes_init+0x0/0x1000 [aes_generic] returned 0 after 0 usecs [ 30.354964] calling aes_init+0x0/0x1000 [aes_x86_64] @ 1199 [ 30.354975] initcall aes_init+0x0/0x1000 [aes_x86_64] returned 0 after 0 usecs [ 30.444628] calling sha256_generic_mod_init+0x0/0x1000 [sha256_generic] @ 1211 [ 30.444638] initcall sha256_generic_mod_init+0x0/0x1000 [sha256_generic] returned 0 after 0 usecs [ 31.567210] Adding 15622140k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:15622140k [ 32.274365] type=1400 audit(1304528342.120:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1072 comm="apparmor_parser" [ 32.274492] type=1400 audit(1304528342.120:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1072 comm="apparmor_parser" [ 32.274492] type=1400 audit(1304528342.120:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1072 comm="apparmor_parser" [ 34.794451] calling init_sunrpc+0x0/0x73 [sunrpc] @ 1670 [ 34.795543] RPC: Registered udp transport module. [ 34.795543] RPC: Registered tcp transport module. [ 34.795543] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 34.795543] initcall init_sunrpc+0x0/0x73 [sunrpc] returned 0 after 0 usecs [ 34.797913] calling init_rpcsec_gss+0x0/0x1000 [auth_rpcgss] @ 1670 [ 34.797922] initcall init_rpcsec_gss+0x0/0x1000 [auth_rpcgss] returned 0 after 0 usecs [ 34.947479] calling init_nlm+0x0/0x1000 [lockd] @ 1670 [ 34.947502] initcall init_nlm+0x0/0x1000 [lockd] returned 0 after 0 usecs [ 34.984381] calling init_nfsd+0x0/0x1000 [nfsd] @ 1670 [ 34.984381] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 34.984381] initcall init_nfsd+0x0/0x1000 [nfsd] returned 0 after 0 usecs [ 35.145459] svc: failed to register lockdv1 RPC service (errno 97). [ 35.145484] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 35.164424] NFSD: starting 90-second grace period [ 36.704372] calling VBoxDrvLinuxInit+0x0/0x1000 [vboxdrv] @ 1839 [ 36.704372] vboxdrv: Found 6 processor cores. [ 36.704544] vboxdrv: fAsync=0 offMin=0x3a8 offMax=0x602e [ 36.704560] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 36.704560] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000). [ 36.704560] initcall VBoxDrvLinuxInit+0x0/0x1000 [vboxdrv] returned 0 after 0 usecs [ 36.936905] calling VBoxNetFltLinuxInit+0x0/0x1000 [vboxnetflt] @ 1843 [ 36.936918] initcall VBoxNetFltLinuxInit+0x0/0x1000 [vboxnetflt] returned 0 after 0 usecs [ 36.937009] calling VBoxNetAdpLinuxInit+0x0/0x1000 [vboxnetadp] @ 1844 [ 36.937009] initcall VBoxNetAdpLinuxInit+0x0/0x1000 [vboxnetadp] returned 0 after 0 usecs [ 37.724987] calling init_misc_binfmt+0x0/0x1000 [binfmt_misc] @ 1982 [ 37.724993] initcall init_misc_binfmt+0x0/0x1000 [binfmt_misc] returned 0 after 0 usecs [ 38.654488] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0 [ 38.665202] EXT4-fs (dm-0): re-mounted. Opts: commit=0 [ 45.744494] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0 [ 45.784381] EXT4-fs (dm-0): re-mounted. Opts: commit=0 [ 45.855219] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 70.619966] calling init_fat_fs+0x0/0xfcb [fat] @ 2477 [ 70.620032] initcall init_fat_fs+0x0/0xfcb [fat] returned 0 after 0 usecs [ 70.636310] calling init_vfat_fs+0x0/0x1000 [vfat] @ 2477 [ 70.636316] initcall init_vfat_fs+0x0/0x1000 [vfat] returned 0 after 0 usecs [ 70.745313] calling init_nls_cp437+0x0/0x1000 [nls_cp437] @ 2479 [ 70.745317] initcall init_nls_cp437+0x0/0x1000 [nls_cp437] returned 0 after 0 usecs [ 70.755301] calling init_nls_iso8859_1+0x0/0x1000 [nls_iso8859_1] @ 2482 [ 70.755305] initcall init_nls_iso8859_1+0x0/0x1000 [nls_iso8859_1] returned 0 after 0 usecs