=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.03.03 15:20:52 =~=~=~=~=~=~=~=~=~=~=~=

NAND Boot
Starting U-Boot ...
[S] pressed, enable UART0
[M] pressed, boot from sd card


U-Boot 2010.06-dirty (Feb 27 2011 - 16:11:47)

Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed 336 MHz)
DRAM:  32 MiB
NAND:  2048 MiB
[    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #5 PREEMPT Thu Mar 3 13:48:15 MSK 2011
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
[    0.000000] Kernel command line: mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Memory: 28448k/32768k available (2693k kernel code, 4320k reserved, 958k data, 148k init, 0k highmem)
[    0.000000] NR_IRQS:190
[    0.000000] Console: colour dummy device 80x25
[    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #5 PREEMPT Thu Mar 3 13:48:15 MSK 2011
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
[    0.000000] Kernel command line: mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Memory: 28448k/32768k available (2693k kernel code, 4320k reserved, 958k data, 148k init, 0k highmem)
[    0.000000] NR_IRQS:190
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.010000] Calibrating delay loop... 335.05 BogoMIPS (lpj=1675264)
[    0.250000] pid_max: default: 32768 minimum: 301
[    0.260000] Mount-cache hash table entries: 512
[    0.280000] NET: Registered protocol family 16
[    0.300000] JZ4740 GPIO initalized
[    0.310000] Qi Hardware JZ4740 QI LB60 setup
[    0.370000] bio: create slab <bio-0> at 0
[    0.390000] Switching to clocksource jz4740-timer
[    0.510000] NET: Registered protocol family 2
[    0.520000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.560000] TCP reno registered
[    0.570000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.600000] NET: Registered protocol family 1
[    0.610000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.620000] msgmni has been set to 55
[    0.630000] io scheduler noop registered
[    0.640000] io scheduler deadline registered (default)
[    0.670000] Console: switching to colour frame buffer device 40x15
[    0.700000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.710000] serial8250.0: ttyS0 at MMIO 0x10030000 (irq = 17) is a 16550
[    0.720000] console [ttyS0] enabled, bootconsole disabled
[    0.720000] console [ttyS0] enabled, bootconsole disabled
[    0.730000] serial8250.0: ttyS1 at MMIO 0x10031000 (irq = 16) is a 16550
[    0.760000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung )
[    0.770000] Scanning device for bad blocks
[    1.050000] Bad eraseblock 3890 at 0x00007997f000
[    1.080000] Creating 4 MTD partitions on "jz4740-nand":
[    1.090000] 0x000000000000-0x000000400000 : "NAND BOOT partition"
[    1.100000] 0x000000400000-0x000000800000 : "NAND KERNEL partition"
[    1.120000] 0x000000800000-0x000020800000 : "NAND ROOTFS partition"
[    1.140000] 0x000020800000-0x000080000000 : "NAND DATA partition"
[    1.160000] jz4740-nand jz4740-nand.0: Successfully registered JZ4740 NAND driver
[    1.200000] g_ether gadget: using random self ethernet address
[    1.220000] g_ether gadget: using random host ethernet address
[    1.230000] usb0: MAC 62:ac:c1:e3:39:35
[    1.240000] usb0: HOST MAC 86:16:25:16:88:06
[    1.250000] g_ether gadget: controller 'jz4740-udc' not recognized; trying CDC Ethernet (ECM)
[    1.260000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    1.270000] g_ether gadget: g_ether ready
[    1.280000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.300000] input: matrix-keypad as /devices/platform/matrix-keypad/input/input1
[    1.310000] input: pwm-beeper as /devices/platform/pwm-beeper/input/input2
[    1.320000] jz4740-rtc jz4740-rtc: rtc core: registered jz4740-rtc as rtc0
[    1.340000] jz4740-mmc jz4740-mmc.0: JZ SD/MMC card driver registered
[    1.360000] TCP westwood registered
[    1.370000] NET: Registered protocol family 17
[    1.400000] jz4740-rtc jz4740-rtc: setting system clock to 1970-01-01 00:06:29 UTC (389)
[    1.410000] Waiting for root device /dev/mmcblk0p1...
[    1.450000] mmc0: host does not support reading read-only switch. assuming write-enable.
[    1.460000] mmc0: new SD card at address aaaa
[    1.480000] mmcblk0: mmc0:aaaa SU256 241 MiB 
[    1.500000]  mmcblk0: p1 p2
[    1.530000] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[    1.620000] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[    1.650000] VFS: Mounted root (ext2 filesystem) on device 179:1.
[    1.660000] Freeing unused kernel memory: 148k freed
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[    6.640000] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
- init -

Please press Enter to activate this console. [   10.910000] asoc: jz4740-hifi <-> jz4740-i2s mapping ok



BusyBox v1.17.3 (2011-03-02 16:46:00 MSK) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 ATTITUDE ADJUSTMENT (bleeding edge, r25820) ----------
  * 1/4 oz Vodka      Pour all ingredents into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@BenNanoNote:/# 
root@BenNanoNote:/# uname -a
Linux BenNanoNote 2.6.37.1 #5 PREEMPT Thu Mar 3 13:48:15 MSK 2011 mips GNU/Linux
root@BenNanoNote:/# kexec -l /bo
root@BenNanoNote:/# kexec -l /boot/vm
root@BenNanoNote:/# kexec -l /boot/vmlinux.elf 
CMDLINE[2]: (null)
root@BenNanoNote:/# kexec -e
[   40.280000] Starting new kernel
[   40.300000] image->start = 14370
[   40.310000] image-phys-to-virt->start = 80014370
[   40.320000] Will call new kernel at 80014370
[   40.320000] Bye ...
[    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #6 PREEMPT Thu Mar 3 15:13:06 MSK 2011
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
[    0.000000] Kernel command line:  mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Memory: 28444k/32768k available (2692k kernel code, 4324k reserved, 959k data, 152k init, 0k highmem)
[    0.000000] NR_IRQS:190
[    0.000000] Console: colour dummy device 80x25
[    0.000000] Linux version 2.6.37.1 (bas@bas) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #6 PREEMPT Thu Mar 3 15:13:06 MSK 2011
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0ad0024f (Ingenic JZRISC)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128
[    0.000000] Kernel command line:  mem=32M console=tty0 console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Memory: 28444k/32768k available (2692k kernel code, 4324k reserved, 959k data, 152k init, 0k highmem)
[    0.000000] NR_IRQS:190
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.010000] Calibrating delay loop... 335.05 BogoMIPS (lpj=1675264)
[    0.250000] pid_max: default: 32768 minimum: 301
[    0.260000] Mount-cache hash table entries: 512
[    0.280000] NET: Registered protocol family 16
[    0.300000] JZ4740 GPIO initalized
[    0.310000] Qi Hardware JZ4740 QI LB60 setup
[    0.370000] bio: create slab <bio-0> at 0
[    0.390000] Switching to clocksource jz4740-timer
[    0.510000] NET: Registered protocol family 2
[    0.520000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.550000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.560000] TCP reno registered
[    0.570000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.590000] NET: Registered protocol family 1
[    0.600000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.610000] msgmni has been set to 55
[    0.620000] io scheduler noop registered
[    0.630000] io scheduler deadline registered (default)
[    0.660000] Console: switching to colour frame buffer device 40x15
[    0.680000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.700000] serial8250.0: ttyS0 at MMIO 0x10030000 (irq = 17) is a 16550
[    0.710000] console [ttyS0] enabled, bootconsole disabled
[    0.710000] console [ttyS0] enabled, bootconsole disabled
[    0.730000] serial8250.0: ttyS1 at MMIO 0x10031000 (irq = 16) is a 16550
[    0.760000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung )
[    0.770000] Scanning device for bad blocks
[    1.050000] Bad eraseblock 3890 at 0x00007997f000
[    1.070000] Creating 4 MTD partitions on "jz4740-nand":
[    1.080000] 0x000000000000-0x000000400000 : "NAND BOOT partition"
[    1.100000] 0x000000400000-0x000000800000 : "NAND KERNEL partition"
[    1.110000] 0x000000800000-0x000020800000 : "NAND ROOTFS partition"
[    1.120000] 0x000020800000-0x000080000000 : "NAND DATA partition"
[    1.140000] jz4740-nand jz4740-nand.0: Successfully registered JZ4740 NAND driver
[    1.190000] g_ether gadget: using random self ethernet address
[    1.200000] g_ether gadget: using random host ethernet address
[    1.210000] usb0: MAC 4a:ba:c0:b0:f7:c3
[    1.220000] usb0: HOST MAC 9e:da:7a:45:17:8c
[    1.230000] g_ether gadget: controller 'jz4740-udc' not recognized; trying CDC Ethernet (ECM)
[    1.240000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    1.260000] g_ether gadget: g_ether ready
[    1.270000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.280000] input: matrix-keypad as /devices/platform/matrix-keypad/input/input1
[    1.300000] input: pwm-beeper as /devices/platform/pwm-beeper/input/input2
[    1.320000] jz4740-rtc jz4740-rtc: rtc core: registered jz4740-rtc as rtc0
[    1.340000] jz4740-mmc jz4740-mmc.0: JZ SD/MMC card driver registered
[    1.350000] TCP westwood registered
[    1.360000] NET: Registered protocol family 17
[    1.390000] jz4740-rtc jz4740-rtc: setting system clock to 1970-01-01 00:07:10 UTC (430)
[    1.400000] Waiting for root device /dev/mmcblk0p1...
[    1.420000] mmc0: host does not support reading read-only switch. assuming write-enable.
[    1.430000] mmc0: new SD card at address aaaa
[    1.450000] mmcblk0: mmc0:aaaa SU256 241 MiB 
[    1.470000]  mmcblk0: p1 p2
[    1.520000] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[    1.610000] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[    1.640000] VFS: Mounted root (ext2 filesystem) on device 179:1.
[    1.660000] Freeing unused kernel memory: 152k freed
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode

- regular preinit -
[    6.140000] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
- init -

Please press Enter to activate this console. 


BusyBox v1.17.3 (2011-03-02 16:46:00 MSK) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 ATTITUDE ADJUSTMENT (bleeding edge, r25820) ----------
  * 1/4 oz Vodka      Pour all ingredents into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
 -----------------------------------------------------
root@BenNanoNote:/# uname -a
Linux BenNanoNote 2.6.37.1 #6 PREEMPT Thu Mar 3 15:13:06 MSK 2011 mips GNU/Linux
root@BenNanoNote:/# [   10.490000] asoc: jz4740-hifi <-> jz4740-i2s mapping ok

root@BenNanoNote:/#