INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
BSPUpda▒INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
UUID: FS694D58360AB753

Microsoft Windows CE Bootloader Common Library Version 1.2 Built Jan 31 2015 09:                                                                                                                     03:27
Microsoft Windows CE Bootloader for EFUSA9 Built Jan 31 2015
Portions copyright (c) 2012 F&S Elektronik Systeme GmbH
Boot Loader, Version 1.0
NBoot, Version VN25
HW rev. 1.20

System ready!
Preparing for download...
Press >S< to step into monitor...
AUTO BOOT enabled
HW-Watchdog: ON
+ReadKernelRegionFromNandFlash
Image Signature in Flash Memory found (dwSig=0x43454345)
TOC pointer=0x8045DA5C

ROMHDR (cTOC = 0x0023da5c) ---------------------
    DLL First           : 0x4001efd7
    DLL Last            : 0x4013f000
    Physical First      : 0x80220000
    Physical Last       : 0x804fbf14
    Num Modules         :         32
    RAM Start           : 0x80620000
    RAM Free            : 0x80669000
    RAM End             : 0x90620000
    Num Copy Entries    :          2
    Copy Entries Offset : 0x80445fe0
    Prof Symbol Length  : 0x00000000
    Prof Symbol Offset  : 0x00000000
    Num Files           :          8
    Kernel Flags        : 0x00000001
    FileSys RAM Percent : 0x20202020
    Driver Glob Start   : 0x00000000
    Driver Glob Length  : 0x00000000
    CPU                 :     0x01c4
    MiscFlags           :     0x0002
    Extensions          : 0x80221f00
    Tracking Mem Start  : 0x00000000
    Tracking Mem Length : 0x00000000
Kernel (2927kB) read from flash disk started  finished in 0 milliseconds
Kernel read from NAND
INFO: OEMLaunch: Jumping to Physical Address 0x10220000h (Virtual Address 0x1022                                                                                                                     0000h)...


Jumping to Kernel @ 0x10220000
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
Windows CE Kernel for ARM (Thumb Enabled)
Enabling L2 cache
OEMInit:  silicon rev = 0x12
SMP support enabled

EFUSA9 V1.40 - Firmware Init
Copyright (c) 2013 F&S Elektronik Systeme GmbH
Build: Jun  9 2015/12:56:33
OAL: Detected 2 CPUs
Another CPU core started
[OAL] MACB: Disabled
[OAL] RestartReason: WDOG
** KERNEL FMD: FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
FSPART: FS partition driver loaded
BINFS: RegisterVolume - Mounted volume '\BINFS'
PM-NETDCU: STARTED
BE2: Version 1.4, ActiveKey = Drivers\Active\01
BE2: Version 1.4, ActiveKey = Drivers\Active\05
IPU: Version 1.2, ActiveKey = Drivers\Active\10
HCD: Version 1.1, ActiveKey = Drivers\Active\15
PP: Version 1.1, ActiveKey = Drivers\Active\17
VDI: Version 1.1, ActiveKey = Drivers\Active\18
ENET: Version 1.2, ActiveKey = Comm\ETHNETA
BE2: Version 1.4, ActiveKey = Drivers\Active\33
NI2C: Version 0.1, ActiveKey = Drivers\Active\34
NI2C: Version 0.1, ActiveKey = Drivers\Active\35
NI2C: Version 0.1, ActiveKey = Drivers\Active\36
Serial: Version 1.1, ActiveKey =
Serial: Version 1.1, ActiveKey =
Serial: Port disabled. Serial debug is on !
Serial: Version 1.1, ActiveKey =
TCH: Version 1.0, ActiveKey = Drivers\Active\41
SHC: Version 1.1, ActiveKey = Drivers\Active\42
SHC: Version 1.1, ActiveKey = Drivers\Active\43
SHC: Version 1.1, ActiveKey = Drivers\Active\44
CID: Version 2.5, ActiveKey = Drivers\Active\45
CID: Version 2.5, ActiveKey = Drivers\Active\46
NSPI: Version 3.3, ActiveKey = Drivers\Active\47
NSPI: Version 3.3, ActiveKey = Drivers\Active\48
PWM: Version 1.2, ActiveKey = Drivers\Active\49
EXTRTC: Version 1.2, ActiveKey = Drivers\Active\50
EETI - TUBDevice: 2014-09-02 3.1.8.0002
PPU: Version 1.1, ActiveKey = Drivers\Active\53
DIO: Version 1.3, ActiveKey = Drivers\Active\54
DIO: UseAsIO[0] = 0x00000000
DIO: DataDir[0] = 0x00000000
DIO: DataInit[0] = 0x00000000
DIO: IRQCFG0[0] = 0x00000000
DIO: IRQCFG1[0] = 0x00000000
DIO: IRQCFG2[0] = 0x00000000
DIO: PullUp[0] = 0x00000000
DIO: PullDown[0] = 0x00000000
DIO: UseAsIO[1] = 0x00000000
DIO: DataDir[1] = 0x00000000
DIO: DataInit[1] = 0x00000000
DIO: IRQCFG0[1] = 0x00000000
DIO: IRQCFG1[1] = 0x00000000
DIO: IRQCFG2[1] = 0x00000000
DIO: PullUp[1] = 0x00000000
DIO: PullDown[1] = 0x00000000
DIO: UseAsIO[2] = 0xff000000
DIO: DataDir[2] = 0xff000000
DIO: DataInit[2] = 0x00000000
DIO: IRQCFG0[2] = 0x00000000
DIO: IRQCFG1[2] = 0x00000000
DIO: IRQCFG2[2] = 0x00000000
DIO: PullUp[2] = 0x00000000
DIO: PullDown[2] = 0x00000000
DIO: UseAsIO[3] = 0x000000ff
DIO: DataDir[3] = 0x000000ff
DIO: DataInit[3] = 0x00000000
DIO: IRQCFG0[3] = 0x00000000
DIO: IRQCFG1[3] = 0x00000000
DIO: IRQCFG2[3] = 0x00000000
DIO: PullUp[3] = 0x00000000
DIO: PullDown[3] = 0x00000000
DIO: UseAsIO[4] = 0x00000000
DIO: DataDir[4] = 0x00000000
DIO: DataInit[4] = 0x00000000
DIO: IRQCFG0[4] = 0x00000000
DIO: IRQCFG1[4] = 0x00000000
DIO: IRQCFG2[4] = 0x00000000
DIO: PullUp[4] = 0x00000000
DIO: PullDown[4] = 0x00000000
DIO: UseAsIO[5] = 0x00000000
DIO: DataDir[5] = 0x00000000
DIO: DataInit[5] = 0x00000000
DIO: IRQCFG0[5] = 0x00000000
DIO: IRQCFG1[5] = 0x00000000
DIO: IRQCFG2[5] = 0x00000000
DIO: PullUp[5] = 0x00000000
DIO: PullDown[5] = 0x00000000
DIO: UseAsIO[6] = 0x00000000
DIO: DataDir[6] = 0x00000000
DIO: DataInit[6] = 0x00000000
DIO: IRQCFG0[6] = 0x00000000
DIO: IRQCFG1[6] = 0x00000000
DIO: IRQCFG2[6] = 0x00000000
DIO: PullUp[6] = 0x00000000
DIO: PullDown[6] = 0x00000000
DIO: UseAsIO[7] = 0x00000000
DIO: DataDir[7] = 0x00000000
DIO: DataInit[7] = 0x00000000
DIO: IRQCFG0[7] = 0x00000000
DIO: IRQCFG1[7] = 0x00000000
DIO: IRQCFG2[7] = 0x00000000
DIO: PullUp[7] = 0x00000000