Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for on this drive. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Ubuntu 6.10 Boot files: /boot/grub/menu.lst /etc/fstab sda3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 20.1 GB, 20060135424 bytes 255 heads, 63 sectors/track, 2438 cylinders, total 39179952 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 18,683,594 18,681,547 83 Linux /dev/sda2 20,781,056 39,179,951 18,398,896 83 Linux /dev/sda3 18,683,904 20,781,055 2,097,152 82 Linux swap / Solaris Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders, total 156250000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 * 63 156,248,189 156,248,127 83 Linux "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 d95186eb-e1e9-4416-b861-a63aaf6816b2 ext4 /dev/sda2 f13c4d37-cf48-4e03-91b2-4f4da43a7d73 ext3 /dev/sda3 78625352-0e96-4a43-8a20-460deabd41a4 swap /dev/sdb1 a08ff037-d4df-4678-b3ec-6f58392fc7bd ext3 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro) /dev/sdb1 /media/disk ext3 (rw) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-33-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 linux /boot/vmlinuz-3.2.0-33-generic-pae root=UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 ro quiet splash reboot=bios $vt_handoff initrd /boot/initrd.img-3.2.0-33-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-33-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 echo 'Loading Linux 3.2.0-33-generic-pae ...' linux /boot/vmlinuz-3.2.0-33-generic-pae root=UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-33-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 ro quiet splash reboot=bios $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 echo 'Loading Linux 3.2.0-29-generic-pae ...' linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic-pae } menuentry 'Ubuntu, with Linux 3.0.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 linux /boot/vmlinuz-3.0.0-26-generic root=UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 ro quiet splash reboot=bios $vt_handoff initrd /boot/initrd.img-3.0.0-26-generic } menuentry 'Ubuntu, with Linux 3.0.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 echo 'Loading Linux 3.0.0-26-generic ...' linux /boot/vmlinuz-3.0.0-26-generic root=UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-26-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root d95186eb-e1e9-4416-b861-a63aaf6816b2 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Ubuntu, kernel 2.6.17-12-generic (on /dev/sda2)" --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root f13c4d37-cf48-4e03-91b2-4f4da43a7d73 linux /boot/vmlinuz-2.6.17-12-generic root=/dev/hda2 ro quiet splash initrd /boot/initrd.img-2.6.17-12-generic } menuentry "Ubuntu, kernel 2.6.17-12-generic (recovery mode) (on /dev/sda2)" --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root f13c4d37-cf48-4e03-91b2-4f4da43a7d73 linux /boot/vmlinuz-2.6.17-12-generic root=/dev/hda2 ro single initrd /boot/initrd.img-2.6.17-12-generic } menuentry "Ubuntu, kernel 2.6.17-10-generic (on /dev/sda2)" --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root f13c4d37-cf48-4e03-91b2-4f4da43a7d73 linux /boot/vmlinuz-2.6.17-10-generic root=/dev/hda2 ro quiet splash initrd /boot/initrd.img-2.6.17-10-generic } menuentry "Ubuntu, kernel 2.6.17-10-generic (recovery mode) (on /dev/sda2)" --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root f13c4d37-cf48-4e03-91b2-4f4da43a7d73 linux /boot/vmlinuz-2.6.17-10-generic root=/dev/hda2 ro single initrd /boot/initrd.img-2.6.17-10-generic } menuentry "Ubuntu, memtest86+ (on /dev/sda2)" --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root f13c4d37-cf48-4e03-91b2-4f4da43a7d73 linux /boot/memtest86+.bin } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda3 during installation UUID=72ce3461-be6b-43ae-aa98-e92d29d6dd68 none swap sw 0 0 -------------------------------------------------------------------------------- ====================== sda1/boot/extlinux/extlinux.conf: ======================= -------------------------------------------------------------------------------- ## /boot/extlinux/extlinux.conf ## ## IMPORTANT WARNING ## ## The configuration of this file is generated automatically. ## Do not edit this file manually, use: extlinux-update default l0 prompt 1 timeout 50 include themes/debian/theme.cfg -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 3.996761322 = 4.291489792 boot/grub/core.img 1 3.284805298 = 3.527032832 boot/grub/grub.cfg 1 8.059871674 = 8.654221312 boot/initrd.img-3.0.0-26-generic 26 1.656219482 = 1.778352128 boot/initrd.img-3.2.0-29-generic-pae 6 4.485351562 = 4.816109568 boot/initrd.img-3.2.0-33-generic-pae 6 4.722270966 = 5.070499840 boot/vmlinuz-3.0.0-26-generic 4 7.823680878 = 8.400613376 boot/vmlinuz-3.2.0-29-generic-pae 4 1.615024567 = 1.734119424 boot/vmlinuz-3.2.0-33-generic-pae 2 4.485351562 = 4.816109568 initrd.img 6 1.656219482 = 1.778352128 initrd.img.old 6 1.615024567 = 1.734119424 vmlinuz 2 7.823680878 = 8.400613376 vmlinuz.old 4 ================= sda1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) 7.000850677 = 7.517106176 boot/extlinux/chain.c32 1 2.601512909 = 2.793353216 boot/extlinux/extlinux.conf 1 ============== sda1: Version of COM32(R) files used by Syslinux: =============== boot/extlinux/chain.c32 : COM32R module (v4.xx) =========================== sda2/boot/grub/menu.lst: =========================== -------------------------------------------------------------------------------- # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=f13c4d37-cf48-4e03-91b2-4f4da43a7d73 ro # kopt_2_6=root=/dev/hda2 ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,1) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## title Ubuntu, kernel 2.6.17-12-generic root (hd0,1) kernel /boot/vmlinuz-2.6.17-12-generic root=/dev/hda2 ro quiet splash initrd /boot/initrd.img-2.6.17-12-generic quiet savedefault boot title Ubuntu, kernel 2.6.17-12-generic (recovery mode) root (hd0,1) kernel /boot/vmlinuz-2.6.17-12-generic root=/dev/hda2 ro single initrd /boot/initrd.img-2.6.17-12-generic boot title Ubuntu, kernel 2.6.17-10-generic root (hd0,1) kernel /boot/vmlinuz-2.6.17-10-generic root=/dev/hda2 ro quiet splash initrd /boot/initrd.img-2.6.17-10-generic quiet savedefault boot title Ubuntu, kernel 2.6.17-10-generic (recovery mode) root (hd0,1) kernel /boot/vmlinuz-2.6.17-10-generic root=/dev/hda2 ro single initrd /boot/initrd.img-2.6.17-10-generic boot title Ubuntu, memtest86+ root (hd0,1) kernel /boot/memtest86+.bin quiet boot ### END DEBIAN AUTOMAGIC KERNELS LIST -------------------------------------------------------------------------------- =============================== sda2/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 # /dev/hda2 UUID=f13c4d37-cf48-4e03-91b2-4f4da43a7d73 / ext3 defaults,errors=remount-ro 0 1 # /dev/hdb1 UUID=a08ff037-d4df-4678-b3ec-6f58392fc7bd /media/disk ext3 defaults 0 2 # /dev/hda1 UUID=d95186eb-e1e9-4416-b861-a63aaf6816b2 /media/hda1 ext3 defaults 0 2 # /dev/hda3 UUID=78625352-0e96-4a43-8a20-460deabd41a4 none swap sw 0 0 /dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 -------------------------------------------------------------------------------- =================== sda2: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 12.775421143 = 13.717504000 boot/grub/menu.lst 1 12.779743195 = 13.722144768 boot/grub/stage2 2 12.637386322 = 13.569290240 boot/initrd.img-2.6.17-10-generic 3 12.554893494 = 13.480714240 boot/initrd.img-2.6.17-12-generic 3 12.607151031 = 13.536825344 boot/vmlinuz-2.6.17-10-generic 2 12.559223175 = 13.485363200 boot/vmlinuz-2.6.17-12-generic 2 12.554893494 = 13.480714240 initrd.img 3 12.637386322 = 13.569290240 initrd.img.old 3 12.559223175 = 13.485363200 vmlinuz 2 12.607151031 = 13.536825344 vmlinuz.old 2 ========= Devices which don't seem to have a corresponding hard drive: ========= sdc sdd sde sdf =============================== StdErr Messages: =============================== unlzma: (stdin): Compressed data is corrupt