[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39-g05e922f (root@fringe) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Jan 3 09:15:43 EST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Manta
[ 0.000000] Initialized persistent memory from a0000000-a01fffff
[ 0.000000] ion_reserve: ion_chunk_heap reserved base 90000000 size 268435456
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU EXYNOS5250 (id 0x43520210)
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] clkout: bad source 0
[ 0.000000] EXYNOS5: PLL settings, A=1000000000, B=1333090909, C=333000000
[ 0.000000] M=1600000000, E=96000000, V=300000000, G=533000000
[ 0.000000] EXYNOS5: ARMCLK=1000000000, CDREX=800000000, ACLK400=533000000
[ 0.000000] ACLK333=333000000, ACLK266=266666666, ACLK200=200000000
[ 0.000000] ACLK166=166500000, ACLK66=66666666
[ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_g3d: source is mout_mpll_user (0), rate is 800000000
[ 0.000000] sclk_gscl_wrap0: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_gscl_wrap1: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_bayer: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_jpeg: source is ext_xtal (0), rate is 24000000
[ 0.000000] sclk_usbdrd30: source is mout_mpll (0), rate is 66666666
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1d0200 s7744 r8192 d12736 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
[ 0.000000] Kernel command line: vmalloc=512M debug_core.break_on_panic=0 debug_core.break_on_exception=0 no_console_suspend s3c2410-wdt.tmr_atboot=1 s3c2410-wdt.tmr_margin=30 wire.search_count=5 s3cfb.bootloaderfb=0x60000000 androidboot.bootloader=MANTAMF01 androidboot.serialno=R32D30227BM androidboot.wifimacaddr=A8:06:00:C3:75:B7 androidboot.btmacaddr=A8:06:00:C3:75:B6 androidboot.mode=charger
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 4192256 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 2047MB = 2047MB total
[ 0.000000] Memory: 1121672k/1121672k available, 974456k reserved, 648576K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0a83000 (10732 kB)
[ 0.000000] .init : 0xc0a83000 - 0xc0ac0e40 ( 248 kB)
[ 0.000000] .data : 0xc0ac2000 - 0xc0b594b8 ( 606 kB)
[ 0.000000] .bss : 0xc0b594dc - 0xc0cf4cd0 (1646 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:597
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000047] Calibrating delay loop... 997.78 BogoMIPS (lpj=2494464)
[ 0.030031] pid_max: default: 32768 minimum: 301
[ 0.030155] Security Framework initialized
[ 0.030177] SELinux: Initializing.
[ 0.030327] Mount-cache hash table entries: 512
[ 0.031042] Initializing cgroup subsys debug
[ 0.031054] Initializing cgroup subsys cpuacct
[ 0.031062] Initializing cgroup subsys memory
[ 0.031092] Initializing cgroup subsys freezer
[ 0.031128] CPU: Testing write buffer coherency: ok
[ 0.031250] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.031280] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[ 0.031321] Setting up static identity map for 0x408379b8 - 0x40837a10
[ 0.085612] CPU1: Booted secondary processor
[ 0.111267] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.111305] CPU1: Unknown IPI message 0x1
[ 0.111417] Brought up 2 CPUs
[ 0.111426] SMP: Total of 2 processors activated (1995.57 BogoMIPS).
[ 0.121290] gpiochip_add: registered GPIOs 0 to 7 on device: GPA0
[ 0.121302] gpiochip_add: registered GPIOs 9 to 14 on device: GPA1
[ 0.121312] gpiochip_add: registered GPIOs 16 to 23 on device: GPA2
[ 0.121322] gpiochip_add: registered GPIOs 25 to 29 on device: GPB0
[ 0.121332] gpiochip_add: registered GPIOs 31 to 35 on device: GPB1
[ 0.121342] gpiochip_add: registered GPIOs 37 to 40 on device: GPB2
[ 0.121351] gpiochip_add: registered GPIOs 42 to 45 on device: GPB3
[ 0.121360] gpiochip_add: registered GPIOs 47 to 53 on device: GPC0
[ 0.121370] gpiochip_add: registered GPIOs 55 to 58 on device: GPC1
[ 0.121379] gpiochip_add: registered GPIOs 60 to 66 on device: GPC2
[ 0.121388] gpiochip_add: registered GPIOs 68 to 74 on device: GPC3
[ 0.121398] gpiochip_add: registered GPIOs 76 to 79 on device: GPD0
[ 0.121407] gpiochip_add: registered GPIOs 81 to 88 on device: GPD1
[ 0.121416] gpiochip_add: registered GPIOs 90 to 95 on device: GPY0
[ 0.121426] gpiochip_add: registered GPIOs 97 to 100 on device: GPY1
[ 0.121435] gpiochip_add: registered GPIOs 102 to 107 on device: GPY2
[ 0.121444] gpiochip_add: registered GPIOs 109 to 116 on device: GPY3
[ 0.121454] gpiochip_add: registered GPIOs 118 to 125 on device: GPY4
[ 0.121463] gpiochip_add: registered GPIOs 127 to 134 on device: GPY5
[ 0.121472] gpiochip_add: registered GPIOs 136 to 143 on device: GPY6
[ 0.121481] gpiochip_add: registered GPIOs 145 to 151 on device: GPC4
[ 0.121490] gpiochip_add: registered GPIOs 153 to 160 on device: GPX0
[ 0.121499] gpiochip_add: registered GPIOs 162 to 169 on device: GPX1
[ 0.121509] gpiochip_add: registered GPIOs 171 to 178 on device: GPX2
[ 0.121518] gpiochip_add: registered GPIOs 180 to 187 on device: GPX3
[ 0.121533] gpiochip_add: registered GPIOs 189 to 196 on device: GPE0
[ 0.121542] gpiochip_add: registered GPIOs 198 to 199 on device: GPE1
[ 0.121551] gpiochip_add: registered GPIOs 201 to 204 on device: GPF0
[ 0.121560] gpiochip_add: registered GPIOs 206 to 209 on device: GPF1
[ 0.121569] gpiochip_add: registered GPIOs 211 to 218 on device: GPG0
[ 0.121579] gpiochip_add: registered GPIOs 220 to 227 on device: GPG1
[ 0.121588] gpiochip_add: registered GPIOs 229 to 230 on device: GPG2
[ 0.121597] gpiochip_add: registered GPIOs 232 to 235 on device: GPH0
[ 0.121606] gpiochip_add: registered GPIOs 237 to 244 on device: GPH1
[ 0.121620] gpiochip_add: registered GPIOs 246 to 253 on device: GPV0
[ 0.121629] gpiochip_add: registered GPIOs 255 to 262 on device: GPV1
[ 0.121638] gpiochip_add: registered GPIOs 264 to 271 on device: GPV2
[ 0.121647] gpiochip_add: registered GPIOs 273 to 280 on device: GPV3
[ 0.121656] gpiochip_add: registered GPIOs 282 to 283 on device: GPV4
[ 0.121668] gpio: GPZ has no PM function
[ 0.121675] gpiochip_add: registered GPIOs 285 to 291 on device: GPZ
[ 0.121881] dummy:
[ 0.122090] NET: Registered protocol family 16
[ 0.122168] Registered FIQ tty driver
[ 0.122200] Last reset was software reset (RST_STAT=0x20000000)
[ 0.124003] Manta HW revision: 8, CPU EXYNOS5250 Rev1.0
[ 0.127475] console [ttyFIQ2] enabled
[ 0.127560] Registered fiq debugger ttyFIQ2
[ 0.127859] persistent_ram: found existing buffer, size 152282, start 152282
[ 0.185989] console [ram-1] enabled
[ 0.187585] bootloader fb located at 60000000-60F9FFFF
[ 0.187704] Registered chained gpio int handler for interrupt 77.
[ 0.187790] Registered interrupt support for gpio group 19.
[ 0.189853] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.189923] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.190156] S3C Power Management, Copyright 2004 Simtec Electronics
[ 0.190429] EXYNOS5250 PMU Initialize
[ 0.191330] EXYNOS: Initializing architecture
[ 0.191721] s3c24xx-pwm s3c24xx-pwm.0: tin at 33333333, tdiv at 33333333, tin=divclk, base 0
[ 0.191901] s3c24xx-pwm s3c24xx-pwm.1: tin at 16666666, tdiv at 16666666, tin=divclk, base 8
[ 0.199653] bio: create slab at 0
[ 0.200018] MXT_BOOSTER:
[ 0.200190] MXT_XVDD:
[ 0.200258] MXT_XVDD: supplied by MXT_BOOSTER
[ 0.200532] VBATT: 3700 mV
[ 0.579594] ion_chunk_heap_create: base 2415919104 size 268435456 align 1048576
[ 0.581532] SCSI subsystem initialized
[ 0.582374] usbcore: registered new interface driver usbfs
[ 0.582490] usbcore: registered new interface driver hub
[ 0.582623] usbcore: registered new device driver usb
[ 0.582875] wake enabled for irq 439
[ 0.583030] wake enabled for irq 432
[ 0.583133] wake enabled for irq 433
[ 0.583197] GPIO Input Driver: Start gpio inputs for manta-keypad... in interrupt mode
[ 0.583363] wake enabled for irq 427
[ 0.583426] GPIO Input Driver: Start gpio inputs for manta-keypad... in interrupt mode
[ 0.583662] input: manta-keypad as /devices/virtual/input/input0
[ 0.583875] input: manta-switch as /devices/virtual/input/input1
[ 0.584026] using input dev manta-keypad for key reset
[ 0.584518] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[ 0.584586] s3c-i2c s3c2440-i2c.0: slave address 0x10
[ 0.584696] s3c-i2c s3c2440-i2c.0: bus frequency set to 65 KHz
[ 0.585028] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[ 0.585094] s3c-i2c s3c2440-i2c.1: slave address 0x10
[ 0.585157] s3c-i2c s3c2440-i2c.1: bus frequency set to 378 KHz
[ 0.585495] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[ 0.585611] s3c-i2c s3c2440-i2c.2: slave address 0x10
[ 0.585674] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
[ 0.585960] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
[ 0.586026] s3c-i2c s3c2440-i2c.3: slave address 0x10
[ 0.586138] s3c-i2c s3c2440-i2c.3: bus frequency set to 378 KHz
[ 0.586462] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
[ 0.586575] s3c-i2c s3c2440-i2c.4: slave address 0x10
[ 0.586638] s3c-i2c s3c2440-i2c.4: bus frequency set to 378 KHz
[ 0.587103] max77686 5-0009: device found
[ 0.593810] max77686_pmic_probe: Device ID=0x09, (version:1, chip_rev:1)
[ 0.594066] max77686-pmic max77686-pmic: Power on triggered by PWRON=High
[ 0.594133] max77686-pmic max77686-pmic: Power on triggered by Manual Reset Event
[ 0.596296] keyboard reset (delayed 1500ms)
[ 0.597389] vdd_mif range: 850 <--> 1200 mV at 1037 mV
[ 0.598152] vdd_arm range: 850 <--> 1500 mV at 1075 mV
[ 0.598862] vdd_int range: 850 <--> 1300 mV at 1037 mV
[ 0.599626] vdd_g3d range: 850 <--> 1250 mV at 1200 mV
[ 0.600577] VCC_1.8V_AP: 1800 mV
[ 0.601574] VMIPI_1.0V: 1000 mV
[ 0.602276] TOUCH_VDD_1.8V: 1800 mV
[ 0.603225] VMIPI_1.8V: 1800 mV
[ 0.604173] VUOTG_3.0V: 3000 mV
[ 0.605166] VHSIC_1.0V: 1000 mV
[ 0.606119] VHSIC_1.8V: 1800 mV
[ 0.606824] 5M_CORE_1.5V: 1500 mV
[ 0.607567] CAM_IO_1.8V: 1800 mV
[ 0.608273] VT_CAM_1.8V: 1800 mV
[ 0.608972] TA_CHECK_1.35V: 1350 mV
[ 0.609678] TSP_AVDD_2.8V: 2800 mV
[ 0.610425] CAM_AF_2.8V: 2800 mV
[ 0.611383] VADC_3.3V: 3300 mV
[ 0.611944] 32KHZ_PMIC:
[ 0.612196] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
[ 0.612262] s3c-i2c s3c2440-i2c.5: slave address 0x10
[ 0.612326] s3c-i2c s3c2440-i2c.5: bus frequency set to 378 KHz
[ 0.612626] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
[ 0.612692] s3c-i2c s3c2440-i2c.7: slave address 0x10
[ 0.612803] s3c-i2c s3c2440-i2c.7: bus frequency set to 378 KHz
[ 0.613004] s3c-i2c s3c2440-i2c.8: i2c-8: S3C I2C adapter
[ 0.613118] s3c-i2c s3c2440-i2c.8: slave address 0x10
[ 0.613181] s3c-i2c s3c2440-i2c.8: bus frequency set to 378 KHz
[ 0.613350] Linux media interface: v0.10
[ 0.613441] Linux video capture interface: v2.00
[ 0.614864] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.615294] Bluetooth: Core ver 2.16
[ 0.615389] NET: Registered protocol family 31
[ 0.615500] Bluetooth: HCI device and connection manager initialized
[ 0.615566] Bluetooth: HCI socket layer initialized
[ 0.615677] Bluetooth: L2CAP socket layer initialized
[ 0.615758] Bluetooth: SCO socket layer initialized
[ 0.616132] cfg80211: Calling CRDA to update world regulatory domain
[ 0.616817] wake enabled for irq 421
[ 0.616993] wake enabled for irq 422
[ 0.617125] Switching to clocksource mct-frc
[ 0.618069] NET: Registered protocol family 2
[ 0.618328] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.618736] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.619827] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.620998] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.621061] TCP: reno registered
[ 0.621127] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.621251] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.621532] NET: Registered protocol family 1
[ 0.621839] Trying to unpack rootfs image as initramfs...
[ 0.645872] Freeing initrd memory: 480K
[ 0.646491] Exynos5 : ARM Clock down on idle mode is enabled
[ 0.646596] EXYNOS5250 ASV(ARM : 4 MIF : 2) using fused group
[ 0.647016] [BT] bcm_bt_lpm_init
[ 0.647288] wake enabled for irq 438
[ 0.647662] exynos_tmu exynos_tmu: Current auto refresh interval(3875 nsec), Normal auto refresh interval(3875 nsec), memory throttle auto refresh internal(1937 nsec)
[ 0.648865] exynos_tmu exynos_tmu: Tmu Initialization is sucessful...!
[ 0.649034] s3c-adc samsung-adc-v4: operating without regulator "vdd" .
[ 0.649207] s3c-adc samsung-adc-v4: attached adc driver
[ 0.649662] audit: initializing netlink socket (disabled)
[ 0.649799] type=2000 audit(0.645:1): initialized
[ 0.650560] highmem bounce pool size: 64 pages
[ 0.655920] fuse init (API version 7.18)
[ 0.656216] msgmni has been set to 924
[ 0.657652] io scheduler noop registered
[ 0.657719] io scheduler deadline registered
[ 0.657908] io scheduler cfq registered (default)
[ 0.657972] io scheduler sio registered
[ 0.710997] keyboard reset canceled
[ 0.860463] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
[ 0.860581] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.862678] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
[ 0.862796] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[ 0.863501] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
[ 0.863569] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[ 0.863783] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.864406] exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
[ 0.864636] exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
[ 0.864864] exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
[ 0.866263] mali mali.0: Probed as mali0
[ 0.866456] mali mali.0: start latency exceeded, new value 875 ns
[ 0.867333] mali mali.0: state restore latency exceeded, new value 806626 ns
[ 0.867480] mali mali.0: stop latency exceeded, new value 1000 ns
[ 0.872084] brd: module loaded
[ 0.874457] loop: module loaded
[ 0.875251] WM1811 LDO1:
[ 0.875721] WM1811 LDO2:
[ 0.880140] wm8994 7-001a: WM1811 revision D CUST_ID 00
[ 0.883956] bcm2079x-spi spi2.0: bcmspinfc_probe, probing bcmspinfc driver
[ 0.884144] bcm2079x-spi spi2.0: requesting IRQ 430
[ 0.884263] bcm2079x-spi spi2.0: bcmspinfc_probe, probing bcmspinfc driver exited successfully
[ 0.884518] tun: Universal TUN/TAP device driver, 1.6
[ 0.884582] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 0.884755] PPP generic driver version 2.4.2
[ 0.884921] PPP BSD Compression module registered
[ 0.885033] PPP Deflate Compression module registered
[ 0.885672] PPP MPPE Compression module registered
[ 0.885739] NET: Registered protocol family 24
[ 0.885899] usbcore: registered new interface driver rtl8187
[ 0.886012] usbcore: registered new interface driver rtl8192cu
[ 0.886163] usbcore: registered new interface driver rndis_wlan
[ 0.886262] usbcore: registered new interface driver rt2500usb
[ 0.886408] usbcore: registered new interface driver rt73usb
[ 0.886513] usbcore: registered new interface driver rt2800usb
[ 0.886664] usbcore: registered new interface driver ath9k_htc
[ 0.886763] usbcore: registered new interface driver carl9170
[ 0.886900] usbcore: registered new interface driver ath6kl_usb
[ 0.887000] usbcore: registered new interface driver asix
[ 0.887141] usbcore: registered new interface driver cdc_ether
[ 0.887268] usbcore: registered new interface driver net1080
[ 0.887406] usbcore: registered new interface driver rndis_host
[ 0.887495] usbcore: registered new interface driver cdc_subset
[ 0.887633] usbcore: registered new interface driver zaurus
[ 0.887737] usbcore: registered new interface driver cdc_ncm
[ 0.887963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.888397] s5p-ehci s5p-ehci: S5P EHCI Host Controller
[ 0.888568] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[ 0.888748] s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
[ 0.897258] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[ 0.897498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.897563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.897676] usb usb1: Product: S5P EHCI Host Controller
[ 0.897739] usb usb1: Manufacturer: Linux 3.4.39-g05e922f ehci_hcd
[ 0.897849] usb usb1: SerialNumber: s5p-ehci
[ 0.898214] hub 1-0:1.0: USB hub found
[ 0.898334] hub 1-0:1.0: 3 ports detected
[ 0.898643] s5p-ehci s5p-ehci: remove, state 1
[ 0.898723] usb usb1: USB disconnect, device number 1
[ 0.899967] s5p-ehci s5p-ehci: USB bus 1 deregistered
[ 0.900220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.900555] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
[ 0.900724] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 1
[ 0.900929] exynos-ohci exynos-ohci: irq 103, io mem 0x12120000
[ 0.956499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.956614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956726] usb usb1: Product: EXYNOS OHCI Host Controller
[ 0.956790] usb usb1: Manufacturer: Linux 3.4.39-g05e922f ohci_hcd
[ 0.956901] usb usb1: SerialNumber: exynos-ohci
[ 0.957276] hub 1-0:1.0: USB hub found
[ 0.957348] hub 1-0:1.0: 3 ports detected
[ 0.957704] exynos-ohci exynos-ohci: remove, state 1
[ 0.957783] usb usb1: USB disconnect, device number 1
[ 0.958501] exynos-ohci exynos-ohci: USB bus 1 deregistered
[ 0.958780] usbcore: registered new interface driver usblp
[ 0.958892] Initializing USB Mass Storage driver...
[ 0.958993] usbcore: registered new interface driver usb-storage
[ 0.959104] USB Mass Storage support registered.
[ 0.959403] s3c-hsotg : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
[ 0.959409] s3c-hsotg : version 15 March 2009
[ 0.959708] file system registered
[ 0.960567] gadget: Mass Storage Function, version: 2009/09/11
[ 0.960684] gadget: Number of LUNs=1
[ 0.960749] lun0: LUN: removable file: (no medium)
[ 0.961089] gadget: android_usb ready
[ 0.961153] bound driver 'android_usb'
[ 0.961325] mousedev: PS/2 mouse device common for all mice
[ 0.961651] usbcore: registered new interface driver xpad
[ 0.961744] usbcore: registered new interface driver usb_acecad
[ 0.961881] usbcore: registered new interface driver aiptek
[ 0.961974] usbcore: registered new interface driver gtco
[ 0.962111] usbcore: registered new interface driver hanwang
[ 0.962200] usbcore: registered new interface driver kbtab
[ 0.962369] usbcore: registered new interface driver wacom
[ 0.962807] input: Atmel maXTouch Touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-004a/input/input2
[ 0.972409] mali mali.0: state save latency exceeded, new value 8334 ns
[ 0.972813] pd-g3d: Power-off latency exceeded, new value 282209 ns
[ 1.072819] max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr_smpl: WTSR: enable, SMPL: enable
[ 1.172728] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
[ 1.173306] i2c /dev entries driver
[ 1.173979] exynos-mdev.0: Media0[0xde180400] was registered successfully
[ 1.174164] exynos-mdev.1: Media1[0xde180800] was registered successfully
[ 1.174303] exynos-mdev.2: Media2[0xde180c00] was registered successfully
[ 1.174900] [INFO]gsc_probe:1427: gsc-0 registered successfully
[ 1.175336] [INFO]gsc_probe:1427: gsc-1 registered successfully
[ 1.175829] [INFO]gsc_probe:1427: gsc-2 registered successfully
[ 1.176229] [INFO]gsc_probe:1427: gsc-3 registered successfully
[ 1.176389] Initialize JPEG driver
[ 1.176609] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
[ 1.176775] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
[ 1.177124] Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
[ 1.177308] EXYNOS MFC V4L2 Driver, (c) 2010 Samsung Electronics
[ 1.177665] s5p-mfc s5p-mfc: decoder registered as /dev/video6
[ 1.177836] s5p-mfc s5p-mfc: encoder registered as /dev/video7
[ 1.178320] i2c i2c-0: attached exynos hdcp into i2c adapter successfully
[ 1.178416] i2c-core: driver [exynos_hdcp] using legacy suspend method
[ 1.178529] i2c-core: driver [exynos_hdcp] using legacy resume method
[ 1.178603] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[ 1.178851] s5p-hdmi exynos5-hdmi: hdmiphy i2c bus number = 8
[ 1.179190] s5p-hdmiphy 8-0038: hdmiphy_probe start
[ 1.179307] s5p-hdmiphy 8-0038: probe successful
[ 1.204026] s5p-hdmi exynos5-hdmi: probe sucessful
[ 1.204241] i2c i2c-0: probed exynos edid
[ 1.204345] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
[ 1.204813] s5p-mixer s5p-mixer: probe start
[ 1.205009] s5p-mixer s5p-mixer: resources acquired
[ 1.205143] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
[ 1.205309] s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16
[ 1.205489] s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17
[ 1.205627] s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18
[ 1.205757] s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19
[ 1.205870] s5p-mixer s5p-mixer: mixer0 create links
[ 1.205940] s5p-mixer s5p-mixer: mixer1 create links
[ 1.206059] s5p-mixer s5p-mixer: mixer links are created successfully
[ 1.206138] s5p-mixer s5p-mixer: probe successful
[ 1.207264] fimc_is_spi successfully probed
[ 1.207351] Driver for 1-wire Dallas network protocol.
[ 1.275046] wake enabled for irq 420
[ 1.275470] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 1.275668] s3c2410-wdt s3c2410-wdt: starting watchdog timer
[ 1.275786] s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq disabled
[ 1.276287] device-mapper: uevent: version 1.0.3
[ 1.276520] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.276743] Bluetooth: HCI UART driver ver 2.2
[ 1.276808] Bluetooth: HCI H4 protocol initialized
[ 1.276968] usbcore: registered new interface driver btusb
[ 1.277131] cpuidle: using governor ladder
[ 1.277365] cpuidle: using governor menu
[ 1.277501] sdhci: Secure Digital Host Controller Interface driver
[ 1.277565] sdhci: Copyright(c) Pierre Ossman
[ 1.277753] Synopsys Designware Multimedia Card Interface Driver
[ 1.277915] dw_mmc dw_mmc.0: Using internal DMA controller.
[ 1.278287] mmc0: no vmmc regulator found
[ 1.280251] dw_mmc dw_mmc.0: Version ID is 241a
[ 1.280324] dw_mmc dw_mmc.0: DW MMC controller at irq 107, 32 bit host data width, 128 deep fifo
[ 1.280602] dw_mmc dw_mmc.1: Using internal DMA controller.
[ 1.280894] mmc1: no vmmc regulator found
[ 1.282257] dw_mmc dw_mmc.1: Version ID is 241a
[ 1.282325] dw_mmc dw_mmc.1: DW MMC controller at irq 108, 32 bit host data width, 128 deep fifo
[ 1.282438] dw_mmc dw_mmc.1: Internal DMAC interrupt fix enabled.
[ 1.291172] usbcore: registered new interface driver usbhid
[ 1.291290] usbhid: USB HID core driver
[ 1.307261] mmc_host mmc0: device is being hw reset
[ 1.467278] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 1.547210] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[ 1.547441] dw_mmc dw_mmc.0: cmd0 data error:-84 pending:180 status:106 tcb:80 tbb:0
[ 1.547938] mmc0: new HS200 MMC card at address 0001
[ 1.548464] mmcblk0: mmc0:0001 MBG4GA 29.1 GiB
[ 1.548714] mmcblk0boot0: mmc0:0001 MBG4GA partition 1 4.00 MiB
[ 1.549014] mmcblk0boot1: mmc0:0001 MBG4GA partition 2 4.00 MiB
[ 1.554013] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.555862] mmcblk0boot1: unknown partition table
[ 1.556564] mmcblk0boot0: unknown partition table
[ 1.642976] i2c i2c-1: MPU6050 is ready to go!
[ 1.643232] bh1721fvc_i2c_probe: registering lightsensor-level input device
[ 1.644965] ashmem: initialized
[ 1.645086] logger: created 256K log 'log_main'
[ 1.645203] logger: created 256K log 'log_events'
[ 1.645365] logger: created 256K log 'log_radio'
[ 1.645495] logger: created 256K log 'log_system'
[ 1.645719] Mobicore API module initialized!
[ 1.647466] samsung-i2s samsung-i2s.0: start latency exceeded, new value 958 ns
[ 1.647539] samsung-i2s samsung-i2s.0: state restore latency exceeded, new value 1125 ns
[ 1.647607] samsung-i2s samsung-i2s.0: stop latency exceeded, new value 875 ns
[ 1.647818] samsung-i2s samsung-i2s.0: state save latency exceeded, new value 1083 ns
[ 1.648089] pd-maudio: Power-off latency exceeded, new value 154792 ns
[ 1.655359] pd-maudio: Power-on latency exceeded, new value 151792 ns
[ 1.655484] samsung-i2s samsung-i2s.0: stop latency exceeded, new value 1042 ns
[ 1.658896] asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
[ 1.659265] asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
[ 1.659552] asoc: wm8994-aif2 <-> manta-voice mapping ok
[ 1.659897] asoc: wm8994-aif3 <-> manta-bt mapping ok
[ 1.684570] input: Manta-I2S Headset as /devices/platform/manta-i2s/sound/card0/input3
[ 1.685830] asoc: dit-hifi <-> samsung-spdif mapping ok
[ 1.686322] GACT probability NOT on
[ 1.686440] Mirror/redirect action on
[ 1.686502] u32 classifier
[ 1.686563] Actions configured
[ 1.686675] Netfilter messages via NETLINK v0.30.
[ 1.686778] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.687311] ctnetlink v0.93: registering with nfnetlink.
[ 1.687407] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.687520] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.687809] xt_time: kernel timezone is -0000
[ 1.688195] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.688473] arp_tables: (C) 2002 David S. Miller
[ 1.688577] TCP: cubic registered
[ 1.688690] Initializing XFRM netlink socket
[ 1.689164] NET: Registered protocol family 10
[ 1.689857] Mobile IPv6
[ 1.689991] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.690175] IPv6 over IPv4 tunneling driver
[ 1.691046] NET: Registered protocol family 17
[ 1.691180] NET: Registered protocol family 15
[ 1.691403] Bluetooth: RFCOMM TTY layer initialized
[ 1.691530] Bluetooth: RFCOMM socket layer initialized
[ 1.691595] Bluetooth: RFCOMM ver 1.11
[ 1.691657] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.691769] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.691917] NET: Registered protocol family 35
[ 1.692061] lib80211: common routines for IEEE802.11 drivers
[ 1.692193] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 1.692416] Registering SWP/SWPB emulation handler
[ 1.692537] pd-gscl3: Power-off latency exceeded, new value 750 ns
[ 1.692679] pd-isp: Power-off latency exceeded, new value 166667 ns
[ 1.692810] pd-gscl2: Power-off latency exceeded, new value 750 ns
[ 1.692891] pd-gscl1: Power-off latency exceeded, new value 750 ns
[ 1.693020] pd-gscl0: Power-off latency exceeded, new value 791 ns
[ 1.693144] pd-dp: Power-off latency exceeded, new value 709 ns
[ 1.693289] pd-gscl: Power-off latency exceeded, new value 201417 ns
[ 1.693372] pd-mixer: Power-off latency exceeded, new value 792 ns
[ 1.693500] pd-hdmi: Power-off latency exceeded, new value 708 ns
[ 1.693579] pd-fimd1: Power-off latency exceeded, new value 792 ns
[ 1.693853] pd-disp1: Power-off latency exceeded, new value 157792 ns
[ 1.693946] pd-mfc: Power-off latency exceeded, new value 188708 ns
[ 1.699856] wake enabled for irq 424
[ 1.700202] wake enabled for irq 426
[ 2.029452] battery: charge source type was changed: ac-other
[ 2.038736] pd-disp1: Power-on latency exceeded, new value 187330 ns
[ 2.038857] pd-fimd1: Power-on latency exceeded, new value 875 ns
[ 2.038927] s3c-fb exynos5-fb.1: start latency exceeded, new value 875 ns
[ 2.039052] s3c-fb exynos5-fb.1: state restore latency exceeded, new value 10541 ns
[ 2.039168] s3c-fb exynos5-fb.1: stop latency exceeded, new value 875 ns
[ 2.072623] s3c-fb exynos5-fb.1: window 0: fb
[ 2.073048] pd-dp: Power-on latency exceeded, new value 1000 ns
[ 2.073121] s5p-dp s5p-dp: start latency exceeded, new value 792 ns
[ 2.073237] s5p-dp s5p-dp: state restore latency exceeded, new value 1167 ns
[ 2.073303] s5p-dp s5p-dp: stop latency exceeded, new value 834 ns
[ 2.075027] s5p-dp s5p-dp: EDID data does not include any extensions.
[ 2.087860] s5p-dp s5p-dp: EDID Read success!
[ 2.100395] s5p-dp s5p-dp: Link Training Clock Recovery success
[ 2.116840] s5p-dp s5p-dp: Link Training success!
[ 2.265305] wifi_set_power = 1
[ 2.622281] wifi_set_carddetect = 1
[ 2.652279] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.663630] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[ 2.666232] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[ 2.670171] F1 signature OK, socitype:0x1 chip:0x4324 rev:0x2 pkg:0xd
[ 2.670741] DHD: dongle ram size is set to 589824(orig 589824) at 0x0
[ 2.671780] wl_create_event_handler(): thread:wl_event_handler:62 started
[ 2.671797] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xddc013d8
[ 2.672871] p2p0: P2P Interface Registered
[ 2.673035] dhd_attach(): thread:dhd_watchdog_thread:63 started
[ 2.673237] dhd_attach(): thread:dhd_dpc:64 started
[ 2.673388] dhd_attach(): thread:dhd_rxf:65 started
[ 2.673584] dhd_attach(): thread:dhd_sysioc:66 started
[ 2.673765] wifi_get_mac_addr
[ 2.674231] Broadcom Dongle Host Driver: register interface [wlan0] MAC: a8:06:00:c3:75:b7
[ 2.674387]
[ 2.674389] Dongle Host Driver, version 1.88.45 (r)
[ 2.674393] Compiled in drivers/net/wireless/bcmdhd on Jan 3 2015 at 09:14:50
[ 2.674619] wifi_set_power = 0
[ 2.782260] =========== WLAN placed in RESET ========
[ 2.807697] max77686-rtc max77686-rtc: setting system clock to 2015-02-22 10:37:00 UTC (1424601420)
[ 2.817598] ALSA device list:
[ 2.817681] #0: Manta-I2S
[ 2.817753] #1: Manta-SPDIF
[ 2.818164] Freeing init memory: 244K
[ 2.818239] Write protecting the kernel text section c0008000 - c0a83000
[ 2.818793] rodata_test: attempting to write to read-only section:
[ 2.818929] write to read-only section trapped, success
[ 2.924610] type=1403 audit(1424601420.609:2): policy loaded auid=4294967295 ses=4294967295
[ 2.924886] SELinux: Loaded policy from /sepolicy
[ 2.927682] type=1404 audit(1424601420.614:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 4.208634] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 4.350578] init: /dev/hw_random not found
[ 4.350706] keychord: using input dev manta-keypad for fevent
[ 4.350752] keychord: using input dev Manta-I2S Headset for fevent
[ 4.414081] init: /dev/hw_random not found
[ 4.414167] init: Unable to open persistent property directory /data/property errno: 2
[ 4.416145] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 4.416202] init: powerctl: cannot expand '${sys.powerctl}'
[ 4.416290] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[ 4.416374] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[ 4.416459] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
[ 4.416544] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
[ 4.416632] init: property 'persist.sys.usb.config' doesn't exist while expanding '${persist.sys.usb.config}'
[ 4.416716] init: cannot expand '${persist.sys.usb.config}' while assigning to 'sys.usb.config'
[ 4.416757] charger:
[ 4.416763] charger: *************** LAST KMSG ***************
[ 4.416769] charger:
[ 4.417157] charger: last_kmsg not found. Cold reset?
[ 4.417264] charger:
[ 4.417310] charger: ************* END LAST KMSG *************
[ 4.417391] charger:
[ 4.417436] charger: --------------- STARTING CHARGER MODE ---------------
[ 4.417475] type=1400 audit(1424601422.099:4): avc: denied { entrypoint } for pid=108 comm="init" path="/sbin/healthd" dev="rootfs" ino=121 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file
[ 4.419288] healthd: BatteryHealthPath not found
[ 4.419340] healthd: BatteryPresentPath not found
[ 4.437429] atmel_mxt_ts 3-004a: could not find firmware file
[ 4.438342] audience_es305 4-003e: firmware request failed
[ 4.454461] s3c-fb exynos5-fb.1: state save latency exceeded, new value 95084 ns
[ 4.454471] pd-fimd1: Power-off latency exceeded, new value 1000 ns
[ 4.454636] s5p-dp s5p-dp: stop latency exceeded, new value 1041 ns
[ 4.454644] s5p-dp s5p-dp: start latency exceeded, new value 833 ns
[ 4.454650] s5p-dp s5p-dp: state save latency exceeded, new value 959 ns
[ 4.454665] s5p-dp s5p-dp: stop latency exceeded, new value 8500 ns
[ 4.454671] pd-dp: Power-off latency exceeded, new value 833 ns
[ 4.455904] pd-disp1: Power-off latency exceeded, new value 1221167 ns
[ 4.456900] pd-disp1: Power-on latency exceeded, new value 975916 ns
[ 4.457846] s3c-fb exynos5-fb.1: state restore latency exceeded, new value 934126 ns
[ 4.662519] manta_otg manta_otg_work: UNDEFINED -> b_idle
[ 4.786590] smb347 2-0006: charge terminated
[ 4.813146] atmel_mxt_ts 3-004a: Family ID: 162 Variant ID: 0 Version: 18 Build: 170
[ 4.813200] atmel_mxt_ts 3-004a: Matrix X Size: 32 Matrix Y Size: 52 Object Num: 29
[ 4.825131] atmel_mxt_ts 3-004a: Mxt touch controller initialized
[ 4.872621] healthd-manta: battery charge enable=1
[ 4.872739] healthd: battery l=100 v=4304 t=28.0 h=2 st=2 c=42 chg=a
[ 4.917146] healthd: battery l=100 v=4304 t=28.0 h=2 st=2 c=42 chg=a
[ 5.155350] pd-dp: Power-on latency exceeded, new value 2459 ns
[ 5.155412] s5p-dp s5p-dp: start latency exceeded, new value 2291 ns
[ 5.155456] s5p-dp s5p-dp: state restore latency exceeded, new value 2583 ns
[ 5.157195] s5p-dp s5p-dp: EDID data does not include any extensions.
[ 5.170459] s5p-dp s5p-dp: EDID Read success!
[ 5.182781] s5p-dp s5p-dp: Link Training Clock Recovery success
[ 5.199234] s5p-dp s5p-dp: Link Training success!
[ 5.573521] charger: power supply manta-battery (Battery) (action=add num_online=0 num_supplies=1)
[ 5.647785] healthd: battery l=100 v=4304 t=28.0 h=2 st=2 c=42 chg=a
[ 5.667593] charger: power supply ds2784-fuelgauge (Battery) (action=add num_online=0 num_supplies=2)
[ 5.686657] charger: power supply smb347-battery (Battery) (action=add num_online=0 num_supplies=3)
[ 5.691269] charger: power supply smb347-mains (Mains) online (action=add num_online=1 num_supplies=4)
[ 5.695953] charger: power supply smb347-usb (USB) offline (action=add num_online=1 num_supplies=5)
[ 5.714074] healthd: battery l=100 v=4304 t=28.0 h=2 st=2 c=42 chg=a
[ 5.751446] healthd: battery l=100 v=4304 t=28.0 h=2 st=2 c=42 chg=a
[ 5.790662] healthd: battery l=100 v=4304 t=28.0 h=2 st=2 c=42 chg=a
[ 5.819327] healthd: battery l=100 v=4304 t=28.0 h=2 st=2 c=42 chg=a
[ 7.264964] keyboard reset (delayed 1500ms)
[ 8.767708] keyreset: restarting system

No errors detected
Last reset was software reset (RST_STAT=0x20000000)