[luke@Tyionous ~]$ dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33.3-85.fc13.x86_64 (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Thu May 6 18:09:49 UTC 2010 Command line: ro root=UUID=6f8747ee-c6f5-410c-98d6-03a3f3f2cd8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d400 (usable) BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bbd8d000 (usable) BIOS-e820: 00000000bbd8d000 - 00000000bbdd9000 (ACPI NVS) BIOS-e820: 00000000bbdd9000 - 00000000bbde3000 (ACPI data) BIOS-e820: 00000000bbde3000 - 00000000bbde6000 (ACPI NVS) BIOS-e820: 00000000bbde6000 - 00000000bbde7000 (reserved) BIOS-e820: 00000000bbde7000 - 00000000bbdf8000 (ACPI NVS) BIOS-e820: 00000000bbdf8000 - 00000000bbe1f000 (reserved) BIOS-e820: 00000000bbe1f000 - 00000000bbe26000 (ACPI NVS) BIOS-e820: 00000000bbe26000 - 00000000bbe29000 (reserved) BIOS-e820: 00000000bbe29000 - 00000000bbe2e000 (ACPI NVS) BIOS-e820: 00000000bbe2e000 - 00000000bbe4e000 (reserved) BIOS-e820: 00000000bbe4e000 - 00000000bbe91000 (ACPI NVS) BIOS-e820: 00000000bbe91000 - 00000000bc000000 (usable) BIOS-e820: 00000000bc000000 - 00000000bf800000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FC0000000 write-back 2 base 0C0000000 mask FC0000000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 4GB, type WB reg 1, base: 4GB, range: 1GB, type WB reg 2, base: 3GB, range: 1GB, type UC total RAM covered: 4096M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbc000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000fce10] fce10 init_memory_mapping: 0000000000000000-00000000bc000000 0000000000 - 00bc000000 page 2M kernel direct mapping tables up to bc000000 @ 8000-c000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ a000-10000 RAMDISK: 3743c000 - 37fef874 ACPI: RSDP 00000000000f0410 00024 (v03 DELL ) ACPI: XSDT 00000000bbdd9088 00064 (v01 DELL WN09 01072009 AMI 00010013) ACPI: FACP 00000000bbde24f8 000F4 (v04 DELL WN09 01072009 AMI 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20091214/tbfadt-369) ACPI Warning: 32/64X FACS address mismatch in FADT - BBE29F40/00000000BBE29F80, using 32 (20091214/tbfadt-486) ACPI: DSDT 00000000bbdd9180 09378 (v02 DELL WN09 00000070 INTL 20051117) ACPI: FACS 00000000bbe29f40 00040 ACPI: APIC 00000000bbde25f0 00092 (v01 DELL WN09 01072009 AMI 00010013) ACPI: SSDT 00000000bbde2688 0026E (v01 AMICPU PROC 00000001 MSFT 03000001) ACPI: MCFG 00000000bbde28f8 0003C (v01 DELL WN09 01072009 MSFT 00000097) ACPI: SLIC 00000000bbde2938 00176 (v01 DELL WN09 01072009 AMI 00010013) ACPI: HPET 00000000bbde2ab0 00038 (v01 DELL WN09 01072009 AMI. 00000003) ACPI: OSFR 00000000bbde2ae8 00086 (v01 DELL M08 07DA041A ASL 00000061) ACPI: SSDT 00000000bbde2b70 001BB (v01 Nv2Ref Nv2Tabl 00001000 INTL 20051117) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [000000000000b000 - 0000000000020fff] bootmap [0000000000021000 - 0000000000048fff] pages 28 (13 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001db92c8] TEXT DATA BSS ==> [0001000000 - 0001db92c8] #2 [003743c000 - 0037fef874] RAMDISK ==> [003743c000 - 0037fef874] #3 [0001dba000 - 0001dba373] BRK ==> [0001dba000 - 0001dba373] #4 [00000fce20 - 0000100000] BIOS reserved ==> [00000fce20 - 0000100000] #5 [00000fce10 - 00000fce20] MP-table mpf ==> [00000fce10 - 00000fce20] #6 [000009d400 - 00000fca10] BIOS reserved ==> [000009d400 - 00000fca10] #7 [00000fcd8c - 00000fce10] BIOS reserved ==> [00000fcd8c - 00000fce10] #8 [00000fca10 - 00000fcd8c] MP-table mpc ==> [00000fca10 - 00000fcd8c] #9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #12 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000bbd8d 0: 0x000bbe91 -> 0x000bc000 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1031833 DMA zone: 56 pages used for memmap DMA zone: 108 pages reserved DMA zone: 3833 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 751412 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bbd8d000 - 00000000bbdd9000 PM: Registered nosave memory: 00000000bbdd9000 - 00000000bbde3000 PM: Registered nosave memory: 00000000bbde3000 - 00000000bbde6000 PM: Registered nosave memory: 00000000bbde6000 - 00000000bbde7000 PM: Registered nosave memory: 00000000bbde7000 - 00000000bbdf8000 PM: Registered nosave memory: 00000000bbdf8000 - 00000000bbe1f000 PM: Registered nosave memory: 00000000bbe1f000 - 00000000bbe26000 PM: Registered nosave memory: 00000000bbe26000 - 00000000bbe29000 PM: Registered nosave memory: 00000000bbe29000 - 00000000bbe2e000 PM: Registered nosave memory: 00000000bbe2e000 - 00000000bbe4e000 PM: Registered nosave memory: 00000000bbe4e000 - 00000000bbe91000 PM: Registered nosave memory: 00000000bc000000 - 00000000bf800000 PM: Registered nosave memory: 00000000bf800000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at bf800000 (gap: bf800000:20800000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880005800000 s90520 r8192 d24168 u262144 pcpu-alloc: s90520 r8192 d24168 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013805 Policy zone: Normal Kernel command line: ro root=UUID=6f8747ee-c6f5-410c-98d6-03a3f3f2cd8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3976540k/5242880k available (4295k kernel code, 1115548k absent, 150792k reserved, 7535k data, 756k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 1595.821 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.64 BogoMIPS (lpj=1595821) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 using mwait in idle threads. Performance Events: Nehalem/Corei7 events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 APIC calibration not consistent with PM-Timer: 121ms instead of 100ms APIC delta adjusted to PM-Timer: 831243 (1014108) Booting Node 0, Processors #1 CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #2 CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #3 CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #4 CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #5 CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #6 CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #7 Ok. CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 Brought up 8 CPUs Total of 8 processors activated (25531.81 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=792 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5968 bytes devtmpfs: initialized regulator: core version 0.5 Time: 22:40:29 Date: 10/24/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: BIOS _OSI(Linux) query ignored ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored) pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:16.0: reg 10: [mem 0xfbf09000-0xfbf0900f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xfbf08000-0xfbf083ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xfbf07000-0xfbf073ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] pci 0000:00:1f.2: reg 24: [mem 0xfbf06000-0xfbf067ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xfbf05000-0xfbf050ff 64bit] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] pci 0000:02:00.0: reg 24: [io 0xe000-0xe07f] pci 0000:02:00.0: reg 30: [mem 0xfb000000-0xfb07ffff pref] pci 0000:02:00.1: reg 10: [mem 0xfb080000-0xfb083fff] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 11-11] pci 0000:12:00.0: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit] pci 0000:12:00.0: supports D1 D2 pci 0000:12:00.0: PME# supported from D0 D3hot D3cold pci 0000:12:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 12-12] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:13:00.0: reg 10: [io 0xd000-0xd0ff] pci 0000:13:00.0: reg 18: [mem 0xd2c04000-0xd2c04fff 64bit pref] pci 0000:13:00.0: reg 20: [mem 0xd2c00000-0xd2c03fff 64bit pref] pci 0000:13:00.0: reg 30: [mem 0xfbd00000-0xfbd1ffff pref] pci 0000:13:00.0: supports D1 D2 pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:13:00.0: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 13-13] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:1c.2: bridge window [mem 0xd2c00000-0xd2cfffff 64bit pref] pci 0000:14:00.0: reg 10: [mem 0xfbc03000-0xfbc030ff] pci 0000:14:00.0: supports D1 D2 pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:14:00.0: PME# disabled pci 0000:14:00.1: reg 10: [mem 0xfbc02000-0xfbc020ff] pci 0000:14:00.1: supports D1 D2 pci 0000:14:00.1: PME# supported from D0 D1 D2 D3hot pci 0000:14:00.1: PME# disabled pci 0000:14:00.2: reg 10: [mem 0xfbc01000-0xfbc010ff] pci 0000:14:00.2: supports D1 D2 pci 0000:14:00.2: PME# supported from D0 D1 D2 D3hot pci 0000:14:00.2: PME# disabled pci 0000:14:00.3: reg 10: [mem 0xfbc00000-0xfbc007ff] pci 0000:14:00.3: supports D1 D2 pci 0000:14:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:14:00.3: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 14-14] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] pci 0000:00:1c.4: PCI bridge to [bus 15-15] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfbbfffff] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 20-20] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI hpet: hpet4 irq 26 for MSI hpet: hpet5 irq 27 for MSI hpet: hpet6 irq 28 for MSI Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved system 00:06: [io 0x04d0-0x04d1] has been reserved system 00:06: [mem 0xfe800000-0xfe8001ff] has been reserved system 00:09: [io 0x0400-0x047f] has been reserved system 00:09: [io 0x1180-0x119f] has been reserved system 00:09: [io 0x0500-0x057f] has been reserved system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved system 00:09: [mem 0xff000000-0xffffffff] has been reserved pci 0000:00:1c.0: BAR 14: assigned [mem 0xbf800000-0xbf9fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbfa00000-0xbfbfffff 64bit pref] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfc00000-0xbfdfffff 64bit pref] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbfe00000-0xbfffffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 11-11] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xbf800000-0xbf9fffff] pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfbfffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 12-12] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:1c.1: bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 13-13] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] pci 0000:00:1c.2: bridge window [mem 0xd2c00000-0xd2cfffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 14-14] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff] pci 0000:00:1c.3: bridge window [mem 0xbfe00000-0xbfffffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 15-15] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfbbfffff] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd2afffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 20-20] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff] pci_bus 0000:11: resource 1 [mem 0xbf800000-0xbf9fffff] pci_bus 0000:11: resource 2 [mem 0xbfa00000-0xbfbfffff 64bit pref] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff] pci_bus 0000:12: resource 1 [mem 0xfbe00000-0xfbefffff] pci_bus 0000:12: resource 2 [mem 0xbfc00000-0xbfdfffff 64bit pref] pci_bus 0000:13: resource 0 [io 0xd000-0xdfff] pci_bus 0000:13: resource 1 [mem 0xfbd00000-0xfbdfffff] pci_bus 0000:13: resource 2 [mem 0xd2c00000-0xd2cfffff 64bit pref] pci_bus 0000:14: resource 0 [io 0x4000-0x4fff] pci_bus 0000:14: resource 1 [mem 0xfbc00000-0xfbcfffff] pci_bus 0000:14: resource 2 [mem 0xbfe00000-0xbfffffff 64bit pref] pci_bus 0000:15: resource 0 [io 0xc000-0xcfff] pci_bus 0000:15: resource 1 [mem 0xfb200000-0xfbbfffff] pci_bus 0000:15: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref] pci_bus 0000:20: resource 3 [io 0x0000-0xffff] pci_bus 0000:20: resource 4 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:02:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11982k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800059de000 - ffff8800099de000 software IO TLB at phys 0x59de000 - 0x99de000 Intel PCLMULQDQ-NI instructions are not detected. audit: initializing netlink socket (disabled) type=2000 audit(1287960030.018:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7790 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 29 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:03.0: irq 29 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.2: irq 32 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.3: irq 33 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 34 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:1c.4: irq 34 for MSI/MSI-X aer 0000:00:03.0:pcie02: service driver aer loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: Using ACPI for slot detection. pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 442 pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: Slot 1 already registered by another hotplug driver pci-stub: invalid id string "" ACPI: AC Adapter [AC] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: SSDT 00000000bbe25898 00724 (v01 AMI IST 00000001 MSFT 03000001) Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (67 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 35 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:1f.2: irq 35 for MSI/MSI-X ACPI: Battery Slot [BAT0] (battery present) ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 35 ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 35 ata3: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06200 irq 35 ata4: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06280 irq 35 ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 35 ata6: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06380 irq 35 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf08000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf07000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 14:296:705 rtc_cmos 00:03: setting system clock to 2010-10-24 22:40:30 UTC (1287960030) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata2.00: ATAPI: HL-DT-STDVD+/-RW GT32N, A101, max UDMA/100, ATAPI AN ata2.00: configured for UDMA/100 usb 1-1: new high speed USB device using ehci_hcd and address 2 ata1.00: ATA-8: ST9500420AS, D004SDM1, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9500420AS D004 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT32N A101 PQ: 0 ANSI: 5 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 756k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1828k freed Freeing unused kernel memory: 1960k freed dracut: dracut-005-3.fc13 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation udev: starting version 151 ACPI Warning: _BQC returned an invalid level (20091214/video-634) acpi device:04: registered as cooling_device8 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6 ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [drm] Initialized drm 1.1.0 20060810 usb 2-1: new high speed USB device using ehci_hcd and address 2 nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:02:00.0: setting latency timer to 64 [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0a5480a2) [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected [drm] nouveau 0000:02:00.0: ... appears to be valid [drm] nouveau 0000:02:00.0: BIT BIOS found [drm] nouveau 0000:02:00.0: Bios version 70.16.5a.01 [drm] nouveau 0000:02:00.0: Pointer to BIT loadval table invalid [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000323 00010034 [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02011300 00000000 [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02022362 00020010 [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 0000000e 00000000 [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4 [drm] nouveau 0000:02:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [drm] nouveau 0000:02:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [drm] nouveau 0000:02:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0x6B9B usb 1-1.3: new full speed USB device using ehci_hcd and address 3 [drm] nouveau 0000:02:00.0: 0x6E55: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:02:00.0: 0x6E59: Condition still not met after 20ms, skipping following opcodes usb 1-1.3: New USB device found, idVendor=138a, idProduct=0008 usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1 usb 1-1.3: SerialNumber: 3b21a8948284 [drm] nouveau 0000:02:00.0: 0x7006: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0x7033 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0x7F33 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0x7F55 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0x80B7 [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0x811C [drm] nouveau 0000:02:00.0: 0x6A1B: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:02:00.0: 0x54D0: parsing output script 0 [drm] nouveau 0000:02:00.0: Couldn't find matching output script table [drm] nouveau 0000:02:00.0: 0x58C8: parsing output script 0 [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM usb 2-1.7: new high speed USB device using ehci_hcd and address 3 Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 usb 2-1.7: New USB device found, idVendor=0c45, idProduct=6450 usb 2-1.7: New USB device strings: Mfr=2, Product=1, SerialNumber=0 usb 2-1.7: Product: Laptop_Integrated_Webcam_2M usb 2-1.7: Manufacturer: Sonix Technology Co., Ltd. [TTM] Zone kernel: Available graphics memory: 1996534 kiB. [ttm] Initializing pool allocator. [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:02:00.0: Detected a LVDS output [drm] nouveau 0000:02:00.0: Detected a DAC output [drm] nouveau 0000:02:00.0: Detected a TMDS output [drm] nouveau 0000:02:00.0: Detected a LVDS connector [drm] nouveau 0000:02:00.0: Detected a VGA connector [drm] nouveau 0000:02:00.0: Detected a HDMI connector [drm] nouveau 0000:02:00.0: allocated 1600x900 fb: 0x40250000, bo ffff8801374c2800 fbcon: nouveaufb (fb0) is primary device [drm] nouveau 0000:02:00.0: 0x54E1: parsing output script 1 [drm] nouveau 0000:02:00.0: 0x536B: parsing clock script 0 Console: switching to colour frame buffer device 200x56 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation [drm] nouveau 0000:02:00.0: 0x54CB: parsing clock script 1 firewire_ohci 0000:14:00.3: PCI INT D -> GSI 18 (level, low) -> IRQ 18 firewire_ohci 0000:14:00.3: setting latency timer to 64 firewire_ohci: Added fw-ohci device 0000:14:00.3, OHCI version 1.10 firewire_core: created device fw0: GUID 358f5ec04a4fc000, S400 EXT4-fs (sda8): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/sda8 dracut: Loading SELinux policy type=1404 audit(1287960034.437:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 196425 rules. SELinux: 8192 avtab hash slots, 196425 rules. SELinux: 9 users, 13 roles, 3233 types, 157 bools, 1 sens, 1024 cats SELinux: 77 classes, 196425 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda8, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1287960034.832:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root readahead-collector: starting udev: starting version 151 microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3 microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3 microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3 microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3 microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3 microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3 microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3 microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3 microcode: Microcode Update Driver: v2.00 , Peter Oruba dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0xf000-0xf01f] conflicts with ACPI region SMBI [0xf000-0xf00f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a HM57 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: WMI: Mapper loaded r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:13:00.0: setting latency timer to 64 alloc irq_desc for 36 on node -1 alloc kstat_irqs on node -1 r8169 0000:13:00.0: irq 36 for MSI/MSI-X eth0: RTL8168d/8111d at 0xffffc90014cea000, a4:ba:db:cc:26:24, XID 083000c0 IRQ 36 Linux video capture interface: v2.00 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6450) sdhci-pci 0000:14:00.0: SDHCI controller found [1180:e822] (rev 1) sdhci-pci 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sdhci-pci 0000:14:00.0: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:14:00.0: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:14:00.0] using DMA input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) input: Dell WMI hotkeys as /devices/virtual/input/input9 alloc irq_desc for 22 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 alloc irq_desc for 37 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:1b.0: irq 37 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0x11, fmic=0xa, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_sigmatel.c:2996: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 HDA Intel 0000:02:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:02:00.1: setting latency timer to 64 ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found name_count maxed, losing inode data: dev=00:05, inode=10984 name_count maxed, losing inode data: dev=00:05, inode=10679 name_count maxed, losing inode data: dev=00:05, inode=10679 name_count maxed, losing inode data: dev=00:05, inode=10679 name_count maxed, losing inode data: dev=00:05, inode=10679 name_count maxed, losing inode data: dev=00:05, inode=10679 name_count maxed, losing inode data: dev=00:05, inode=10679 name_count maxed, losing inode data: dev=00:05, inode=10679 name_count maxed, losing inode data: dev=00:05, inode=10679 EXT4-fs (sda5): mounted filesystem with ordered data mode SELinux: initialized (dev sda5, type ext4), uses xattr EXT4-fs (sda6): mounted filesystem with ordered data mode SELinux: initialized (dev sda6, type ext4), uses xattr Adding 5711864k swap on /dev/sda7. Priority:-1 extents:1 across:5711864k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts readahead-disable-service: delaying service auditd NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] nouveau 0000:02:00.0: nouveau_channel_free: freeing fifo 2 [drm] nouveau 0000:02:00.0: Allocating FIFO number 2 [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2 type=1305 audit(1287985342.865:49278): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1 readahead-collector: starting delayed service auditd readahead-collector: sorting fuse init (API version 7.13) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts readahead-collector: finished r8169: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present