X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux XBMCLive 2.6.32-29-generic #58-Ubuntu SMP Fri Feb 11 19:00:09 UTC 2011 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-29-generic root=UUID=eb6124bb-36b3-40c2-902d-7f6f322cb34f ro quiet splash xbmc=autostart,nodiskmount loglevel=0 video=vesafb Build Date: 10 December 2010 05:53:04PM xorg-server 2:1.7.6-2ubuntu7.5 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 9 02:28:02 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) ServerLayout "aticonfig Layout" (**) |-->Screen "aticonfig-Screen[0]-0" (0) (**) | |-->Monitor "aticonfig-Monitor[0]-0" (**) | |-->Device "aticonfig-Device[0]-0" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType". Entry deleted from font path. (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"). (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:1:0:0) 1002:95c5:1028:9018 ATI Technologies Inc RV620 LE [Radeon HD 3450] rev 0, Mem @ 0xd0000000/268435456, 0xfe9f0000/65536, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Chipset Supported AMD Graphics Processor (0x95C5) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x92f7ff0 (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "Capabilities" "0x00000800" (**) fglrx(0): Option "DPMS" "true" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 250 ukiDynamicMajor: found major device number 250 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 3400 Series" (Chipset = 0x95c5) (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x9018) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe9f0000 (--) fglrx(0): I/O port at 0x0000dc00 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 10.88 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV620 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000) (II) fglrx(0): Interrupt handler installed at IRQ 29. (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: HSP Model: 4c54 Serial#: 11 (II) fglrx(0): Year: 2006 Week: 47 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): DFP 1.x compatible TMDS (II) fglrx(0): Max Image Size [cm]: horiz.: 70 vert.: 39 (II) fglrx(0): Gamma: 1.00 (II) fglrx(0): DPMS capabilities: StandBy (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.648 redY: 0.331 greenX: 0.290 greenY: 0.610 (II) fglrx(0): blueX: 0.148 blueY: 0.073 whiteX: 0.273 whiteY: 0.275 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) fglrx(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #3: hsize: 800 vsize 600 refresh: 60 vid: 16453 (II) fglrx(0): #4: hsize: 800 vsize 600 refresh: 70 vid: 19013 (II) fglrx(0): #5: hsize: 800 vsize 600 refresh: 75 vid: 20293 (II) fglrx(0): #6: hsize: 640 vsize 480 refresh: 60 vid: 16433 (II) fglrx(0): #7: hsize: 640 vsize 480 refresh: 75 vid: 20273 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 82.0 MHz Image Size: 698 x 392 mm (II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1462 h_blank_end 1708 h_border: 8 (II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 v_border: 2 (II) fglrx(0): #1: hsize: 760 vsize 155 refresh: 102 vid: 10752 (II) fglrx(0): #1: hsize: 760 vsize 475 refresh: 67 vid: 1856 (II) fglrx(0): #1: hsize: 760 vsize 1395 refresh: 111 vid: 13304 (II) fglrx(0): #1: hsize: 760 vsize 148 refresh: 70 vid: 51714 (II) fglrx(0): #1: hsize: 760 vsize 895 refresh: 93 vid: 8596 (II) fglrx(0): Serial No: (II) fglrx(0): Monitor name: YT07H (II) fglrx(0): Number of EDID sections to follow: 1 (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff002270544c0b000000 (II) fglrx(0): 2f100103814627008a3532a6544a9c26 (II) fglrx(0): 124646afce004559315981804540454a (II) fglrx(0): 454f3140314f08205656510020302040 (II) fglrx(0): 1300ba882108021e000000fa00002a40 (II) fglrx(0): 07f83302ca942100001e000000ff000a (II) fglrx(0): 202020202020202020202020000000fc (II) fglrx(0): 0059543037482020202020202020013a (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 using monitor section aticonfig-Monitor[0]-0 (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1366x768 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 3400 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (**) fglrx(0): Capabilities: 0x00000800 (**) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 250 ukiDynamicMajor: found major device number 250 ukiDynamicMajor: found major device number 250 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7753000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-29-generic (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0101d000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2200) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 280 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (**) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (WW) fglrx(0): Option "VendorName" is not used (WW) fglrx(0): Option "ModelName" is not used (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 250 ukiDynamicMajor: found major device number 250 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 361 x 203 (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "lv3:ralt_switch" (II) XKB: generating xkmfile /tmp/server-884C6C7246E5186E4DB7A4CD26B9F16BE06DFFDC.xkm (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device Vigor-Tech Generic USB-PS2 (/dev/input/event7) (**) Vigor-Tech Generic USB-PS2: Applying InputClass "evdev keyboard catchall" (**) Vigor-Tech Generic USB-PS2: always reports core events (**) Vigor-Tech Generic USB-PS2: Device: "/dev/input/event7" (II) Vigor-Tech Generic USB-PS2: Found keys (II) Vigor-Tech Generic USB-PS2: Configuring as keyboard (II) XINPUT: Adding extended input device "Vigor-Tech Generic USB-PS2" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device Vigor-Tech Generic USB-PS2 (/dev/input/event8) (**) Vigor-Tech Generic USB-PS2: Applying InputClass "evdev pointer catchall" (**) Vigor-Tech Generic USB-PS2: Applying InputClass "evdev keyboard catchall" (**) Vigor-Tech Generic USB-PS2: always reports core events (**) Vigor-Tech Generic USB-PS2: Device: "/dev/input/event8" (II) Vigor-Tech Generic USB-PS2: Found 9 mouse buttons (II) Vigor-Tech Generic USB-PS2: Found scroll wheel(s) (II) Vigor-Tech Generic USB-PS2: Found relative axes (II) Vigor-Tech Generic USB-PS2: Found x and y relative axes (II) Vigor-Tech Generic USB-PS2: Found absolute axes (II) Vigor-Tech Generic USB-PS2: Found keys (II) Vigor-Tech Generic USB-PS2: Configuring as mouse (II) Vigor-Tech Generic USB-PS2: Configuring as keyboard (**) Vigor-Tech Generic USB-PS2: YAxisMapping: buttons 4 and 5 (**) Vigor-Tech Generic USB-PS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Vigor-Tech Generic USB-PS2" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "lv3:ralt_switch" (II) Vigor-Tech Generic USB-PS2: initialized for relative axes. (WW) Vigor-Tech Generic USB-PS2: ignoring absolute axes. (II) config/udev: Adding input device Vigor-Tech Generic USB-PS2 (/dev/input/mouse3) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device 2.4G USB RF KeyBoard (/dev/input/event3) (**) 2.4G USB RF KeyBoard: Applying InputClass "evdev keyboard catchall" (**) 2.4G USB RF KeyBoard: always reports core events (**) 2.4G USB RF KeyBoard: Device: "/dev/input/event3" (II) 2.4G USB RF KeyBoard: Found keys (II) 2.4G USB RF KeyBoard: Configuring as keyboard (II) XINPUT: Adding extended input device "2.4G USB RF KeyBoard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device 2.4G USB RF KeyBoard (/dev/input/event4) (**) 2.4G USB RF KeyBoard: Applying InputClass "evdev pointer catchall" (**) 2.4G USB RF KeyBoard: always reports core events (**) 2.4G USB RF KeyBoard: Device: "/dev/input/event4" (II) 2.4G USB RF KeyBoard: Found 3 mouse buttons (II) 2.4G USB RF KeyBoard: Found scroll wheel(s) (II) 2.4G USB RF KeyBoard: Found relative axes (II) 2.4G USB RF KeyBoard: Found x and y relative axes (II) 2.4G USB RF KeyBoard: Configuring as mouse (**) 2.4G USB RF KeyBoard: YAxisMapping: buttons 4 and 5 (**) 2.4G USB RF KeyBoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "2.4G USB RF KeyBoard" (type: MOUSE) (II) 2.4G USB RF KeyBoard: initialized for relative axes. (II) config/udev: Adding input device 2.4G USB RF KeyBoard (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device 2.4G USB RF KeyBoard (/dev/input/event5) (**) 2.4G USB RF KeyBoard: Applying InputClass "evdev keyboard catchall" (**) 2.4G USB RF KeyBoard: always reports core events (**) 2.4G USB RF KeyBoard: Device: "/dev/input/event5" (II) 2.4G USB RF KeyBoard: Found keys (II) 2.4G USB RF KeyBoard: Configuring as keyboard (II) XINPUT: Adding extended input device "2.4G USB RF KeyBoard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device HID 073a:2230 (/dev/input/event6) (**) HID 073a:2230: Applying InputClass "evdev pointer catchall" (**) HID 073a:2230: Applying InputClass "evdev keyboard catchall" (**) HID 073a:2230: always reports core events (**) HID 073a:2230: Device: "/dev/input/event6" (II) HID 073a:2230: Found 20 mouse buttons (II) HID 073a:2230: Found scroll wheel(s) (II) HID 073a:2230: Found relative axes (II) HID 073a:2230: Found x and y relative axes (II) HID 073a:2230: Found absolute axes (II) HID 073a:2230: Found keys (II) HID 073a:2230: Configuring as mouse (II) HID 073a:2230: Configuring as keyboard (**) HID 073a:2230: YAxisMapping: buttons 4 and 5 (**) HID 073a:2230: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "HID 073a:2230" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "lv3:ralt_switch" (II) HID 073a:2230: initialized for relative axes. (WW) HID 073a:2230: ignoring absolute axes. (II) config/udev: Adding input device HID 073a:2230 (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments