[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.7-gentoo (root@livecd) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #4 SMP Sun Feb 3 17:06:02 CET 2013 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003beaffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003beb0000-0x000000003bebdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003bebe000-0x000000003befffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080014 02/27/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3beb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 base 030000000 mask FF8000000 write-back [ 0.000000] 3 base 038000000 mask FFC000000 write-back [ 0.000000] 4 base 03BF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Warning only 895MB will be used. [ 0.000000] Use a HIGHMEM enabled kernel. [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37f13fff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x37bfffff] page 2M [ 0.000000] [mem 0x37c00000-0x37f13fff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37f13fff @ [mem 0x01bfa000-0x01bfffff] [ 0.000000] RAMDISK: [mem 0x37e97000-0x37feffff] [ 0.000000] Allocated new RAMDISK: [mem 0x37d3e000-0x37e96bd7] [ 0.000000] Move RAMDISK from [mem 0x37e97000-0x37fefbd7] to [mem 0x37d3e000-0x37e96bd7] [ 0.000000] ACPI: RSDP 000f9460 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 3beb0100 0004C (v01 022708 XSDT1721 20080227 MSFT 00000097) [ 0.000000] ACPI: FACP 3beb0290 000F4 (v03 022708 FACP1721 20080227 MSFT 00000097) [ 0.000000] ACPI: DSDT 3beb0430 0459E (v01 1ADTQ 1ADTQ003 00000003 INTL 20051117) [ 0.000000] ACPI: FACS 3bebe000 00040 [ 0.000000] ACPI: APIC 3beb0390 00060 (v01 022708 APIC1721 20080227 MSFT 00000097) [ 0.000000] ACPI: MCFG 3beb03f0 0003C (v01 022708 OEMMCFG 20080227 MSFT 00000097) [ 0.000000] ACPI: OEMB 3bebe040 00061 (v01 022708 OEMB1721 20080227 MSFT 00000097) [ 0.000000] ACPI: SSDT 3bebe0b0 0023A (v01 AMI P001PM 00000001 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 895MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37f14000 [ 0.000000] low ram: 0 - 37f14000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37f13fff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x3beaffff] [ 0.000000] On node 0 totalpages: 229025 [ 0.000000] free_area_init_node: node 0, pgdat c17101c0, node_mem_map f763e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1759 pages used for memmap [ 0.000000] Normal zone: 223285 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0x3bf00000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7f01000 s30400 r0 d22848 u53248 [ 0.000000] pcpu-alloc: s30400 r0 d22848 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227234 [ 0.000000] Kernel command line: root=/dev/md5 domdadm rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 898248k/916560k available (5414k kernel code, 17852k reserved, 1862k data, 456k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] vmalloc : 0xf8714000 - 0xfff14000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7f14000 ( 895 MB) [ 0.000000] .init : 0xc171c000 - 0xc178e000 ( 456 kB) [ 0.000000] .data : 0xc1549b90 - 0xc171b440 (1862 kB) [ 0.000000] .text : 0xc1000000 - 0xc1549b90 (5414 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1817.762 MHz processor. [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3635.52 BogoMIPS (lpj=1817762) [ 0.001142] pid_max: default: 32768 minimum: 301 [ 0.001262] Security Framework initialized [ 0.001334] SELinux: Initializing. [ 0.002013] SELinux: Starting in permissive mode [ 0.002035] Mount-cache hash table entries: 512 [ 0.002447] Initializing cgroup subsys cpuacct [ 0.002519] Initializing cgroup subsys freezer [ 0.002739] SMP alternatives: switching to UP code [ 0.012278] Freeing SMP alternatives: 24k freed [ 0.012373] ACPI: Core revision 20120320 [ 0.018050] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.018740] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028817] CPU0: Centaur VIA C7 Processor 1800MHz stepping 00 [ 0.029002] Performance Events: [ 0.029353] Brought up 1 CPUs [ 0.029492] Total of 1 processors activated (3635.52 BogoMIPS). [ 0.030253] devtmpfs: initialized [ 0.030718] PM: Registering ACPI NVS region [mem 0x3bebe000-0x3befffff] (270336 bytes) [ 0.030929] RTC time: 20:50:36, date: 02/03/13 [ 0.031091] NET: Registered protocol family 16 [ 0.031355] kworker/u:0 (12) used greatest stack depth: 7456 bytes left [ 0.032044] ACPI: bus type pci registered [ 0.032328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.032437] PCI: not using MMCONFIG [ 0.032748] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.032819] PCI: Using configuration type 1 for base access [ 0.033954] kworker/u:0 (36) used greatest stack depth: 7420 bytes left [ 0.034226] kworker/u:0 (39) used greatest stack depth: 7012 bytes left [ 0.048817] bio: create slab at 0 [ 0.049387] ACPI: Added _OSI(Module Device) [ 0.049463] ACPI: Added _OSI(Processor Device) [ 0.049532] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.049601] ACPI: Added _OSI(Processor Aggregator Device) [ 0.051151] ACPI: EC: Look up EC in DSDT [ 0.053087] ACPI: Executed 1 blocks of module-level executable AML code [ 0.058733] ACPI: Interpreter enabled [ 0.058819] ACPI: (supports S0 S1 S3 S4 S5) [ 0.059064] ACPI: Using IOAPIC for interrupt routing [ 0.059179] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.060617] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.060722] PCI: Using MMCONFIG for extended config space [ 0.069259] ACPI: Power Resource [SVPR] (on) [ 0.074451] ACPI: No dock devices found. [ 0.074536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.074985] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) [ 0.075263] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.075338] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.075412] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.075516] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.075623] pci_root PNP0A03:00: host bridge window [mem 0x3bf00000-0xdfffffff] [ 0.075728] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfeafffff] [ 0.076089] PCI host bridge to bus 0000:00 [ 0.076164] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.076238] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.076312] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.076386] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.076460] pci_bus 0000:00: root bus resource [mem 0x3bf00000-0xdfffffff] [ 0.076534] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfeafffff] [ 0.076628] pci 0000:00:00.0: [1106:0364] type 00 class 0x060000 [ 0.076647] pci 0000:00:00.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.076741] pci 0000:00:00.1: [1106:1364] type 00 class 0x060000 [ 0.076803] pci 0000:00:00.2: [1106:2364] type 00 class 0x060000 [ 0.076866] pci 0000:00:00.3: [1106:3364] type 00 class 0x060000 [ 0.076928] pci 0000:00:00.4: [1106:4364] type 00 class 0x060000 [ 0.076991] pci 0000:00:00.5: [1106:5364] type 00 class 0x080020 [ 0.077085] pci 0000:00:00.6: [1106:6364] type 00 class 0x060000 [ 0.077148] pci 0000:00:00.7: [1106:7364] type 00 class 0x060000 [ 0.077212] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400 [ 0.077283] pci 0000:00:02.0: [1106:a364] type 01 class 0x060400 [ 0.077368] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.077401] pci 0000:00:03.0: [1106:c364] type 01 class 0x060400 [ 0.077500] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.077558] pci 0000:00:0f.0: [1106:6287] type 00 class 0x010601 [ 0.077581] pci 0000:00:0f.0: reg 10: [io 0xdc00-0xdc07] [ 0.077594] pci 0000:00:0f.0: reg 14: [io 0xd880-0xd883] [ 0.077607] pci 0000:00:0f.0: reg 18: [io 0xd800-0xd807] [ 0.077621] pci 0000:00:0f.0: reg 1c: [io 0xd480-0xd483] [ 0.077634] pci 0000:00:0f.0: reg 20: [io 0xd400-0xd40f] [ 0.077648] pci 0000:00:0f.0: reg 24: [mem 0xfafffc00-0xfaffffff] [ 0.077697] pci 0000:00:0f.0: PME# supported from D3hot [ 0.077724] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a [ 0.077774] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.077847] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 [ 0.077897] pci 0000:00:10.0: reg 20: [io 0xcc00-0xcc1f] [ 0.077942] pci 0000:00:10.0: supports D1 D2 [ 0.077947] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.077971] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 [ 0.078032] pci 0000:00:10.1: reg 20: [io 0xd000-0xd01f] [ 0.078077] pci 0000:00:10.1: supports D1 D2 [ 0.078082] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.078106] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 [ 0.078155] pci 0000:00:10.2: reg 20: [io 0xd080-0xd09f] [ 0.078200] pci 0000:00:10.2: supports D1 D2 [ 0.078205] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.078232] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 [ 0.078255] pci 0000:00:10.4: reg 10: [mem 0xfafff800-0xfafff8ff] [ 0.078337] pci 0000:00:10.4: supports D1 D2 [ 0.078343] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.078374] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100 [ 0.078489] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000 [ 0.078563] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000 [ 0.078584] pci 0000:00:12.0: reg 10: [io 0xc800-0xc8ff] [ 0.078597] pci 0000:00:12.0: reg 14: [mem 0xfafff400-0xfafff4ff] [ 0.078666] pci 0000:00:12.0: supports D1 D2 [ 0.078671] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.078691] pci 0000:00:13.0: [1106:287b] type 00 class 0x060000 [ 0.078797] pci 0000:01:00.0: [1106:3371] type 00 class 0x030000 [ 0.078817] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref] [ 0.078829] pci 0000:01:00.0: reg 14: [mem 0xfb000000-0xfbffffff] [ 0.078867] pci 0000:01:00.0: reg 30: [mem 0xfe9f0000-0xfe9fffff pref] [ 0.078900] pci 0000:01:00.0: supports D1 D2 [ 0.078943] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.079003] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfe9fffff] [ 0.079010] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.079061] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.079141] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref] [ 0.079216] pci 0000:03:00.0: [1106:3119] type 00 class 0x020000 [ 0.079237] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.079258] pci 0000:03:00.0: reg 14: [mem 0xfeaffc00-0xfeaffcff 64bit] [ 0.079352] pci 0000:03:00.0: supports D1 D2 [ 0.079357] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081016] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.081092] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.081099] pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.081124] pci_bus 0000:00: on NUMA node 0 [ 0.081134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.081422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.081460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 0.081528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] [ 0.081667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.081903] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.082286] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.100828] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) [ 0.101298] pci_root PNP0A08:00: host bridge window [mem 0xfeb00000-0xfebfffff] [ 0.101554] PCI host bridge to bus 0000:80 [ 0.101628] pci_bus 0000:80: root bus resource [mem 0xfeb00000-0xfebfffff] [ 0.101719] pci 0000:80:00.0: [1106:287c] type 01 class 0x060400 [ 0.101808] pci 0000:80:00.0: PME# supported from D0 D3hot D3cold [ 0.101843] pci 0000:80:00.1: [1106:287d] type 01 class 0x060400 [ 0.101924] pci 0000:80:00.1: PME# supported from D0 D3hot D3cold [ 0.101968] pci 0000:80:01.0: [1106:3288] type 00 class 0x040300 [ 0.102036] pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff] [ 0.102115] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold [ 0.102211] pci 0000:80:00.0: PCI bridge to [bus 82-82] [ 0.102336] pci 0000:80:00.1: PCI bridge to [bus 81-81] [ 0.102422] pci_bus 0000:80: on NUMA node 0 [ 0.102432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] [ 0.102726] pci0000:80: Requesting ACPI _OSC control (0x1d) [ 0.102800] pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.102903] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.103955] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.104506] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.105051] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.105565] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.106156] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.107079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.108193] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.108799] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.109574] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.109688] vgaarb: loaded [ 0.109754] vgaarb: bridge control possible 0000:01:00.0 [ 0.110204] SCSI subsystem initialized [ 0.110492] libata version 3.00 loaded. [ 0.110509] ACPI: bus type usb registered [ 0.110740] usbcore: registered new interface driver usbfs [ 0.110881] usbcore: registered new interface driver hub [ 0.111092] usbcore: registered new device driver usb [ 0.111615] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.111694] PCI: Using ACPI for IRQ routing [ 0.111768] PCI: pci_cache_line_size set to 64 bytes [ 0.111791] pci 0000:00:00.0: address space collision: [mem 0xfc000000-0xfdffffff pref] conflicts with PCI Bus 0000:01 [mem 0xfb000000-0xfe9fffff] [ 0.112090] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.112094] e820: reserve RAM buffer [mem 0x3beb0000-0x3bffffff] [ 0.112520] NetLabel: Initializing [ 0.112595] NetLabel: domain hash size = 128 [ 0.112663] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.112751] NetLabel: unlabeled traffic allowed by default [ 0.125928] pnp: PnP ACPI init [ 0.126071] ACPI: bus type pnp registered [ 0.126327] pnp 00:00: [bus 00-7f] [ 0.126333] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.126339] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.126345] pnp 00:00: [io 0x0d00-0xffff window] [ 0.126351] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.126357] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.126362] pnp 00:00: [mem 0x3bf00000-0xdfffffff window] [ 0.126368] pnp 00:00: [mem 0xf0000000-0xfeafffff window] [ 0.126373] pnp 00:00: [mem 0x00000000 window] [ 0.126668] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.126861] pnp 00:01: [dma 4] [ 0.126866] pnp 00:01: [io 0x0000-0x000f] [ 0.126871] pnp 00:01: [io 0x0081-0x0083] [ 0.126876] pnp 00:01: [io 0x0087] [ 0.126881] pnp 00:01: [io 0x0089-0x008b] [ 0.126886] pnp 00:01: [io 0x008f] [ 0.126891] pnp 00:01: [io 0x00c0-0x00df] [ 0.127089] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.127119] pnp 00:02: [io 0x0070-0x0071] [ 0.127137] pnp 00:02: [irq 8] [ 0.127251] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.127340] pnp 00:03: [io 0x0060] [ 0.127344] pnp 00:03: [io 0x0064] [ 0.127357] pnp 00:03: [irq 1] [ 0.127495] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.127563] pnp 00:04: [io 0x0061] [ 0.127680] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.127703] pnp 00:05: [io 0x00f0-0x00ff] [ 0.127717] pnp 00:05: [irq 13] [ 0.127832] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.128353] pnp 00:06: [io 0x03f8-0x03ff] [ 0.128361] pnp 00:06: IRQ 3 override to edge, high [ 0.128446] pnp 00:06: [irq 3] [ 0.128687] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.129212] pnp 00:07: [io 0x02f8-0x02ff] [ 0.129220] pnp 00:07: IRQ 3 override to edge, high [ 0.129298] pnp 00:07: [irq 3] [ 0.129541] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.129739] pnp 00:08: [io 0x162e-0x162f] [ 0.129744] pnp 00:08: [io 0x0a00-0x0a7f] [ 0.129941] system 00:08: [io 0x162e-0x162f] has been reserved [ 0.130011] system 00:08: [io 0x0a00-0x0a7f] has been reserved [ 0.130087] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.130313] pnp 00:09: [io 0x0010-0x001f] [ 0.130318] pnp 00:09: [io 0x0022-0x002d] [ 0.130323] pnp 00:09: [io 0x0030-0x003f] [ 0.130328] pnp 00:09: [io 0x0044-0x004d] [ 0.130333] pnp 00:09: [io 0x0050-0x005f] [ 0.130338] pnp 00:09: [io 0x0062-0x0063] [ 0.130343] pnp 00:09: [io 0x0065-0x006f] [ 0.130348] pnp 00:09: [io 0x0072-0x007f] [ 0.130353] pnp 00:09: [io 0x0080] [ 0.130358] pnp 00:09: [io 0x0084-0x0086] [ 0.130368] pnp 00:09: [io 0x0088] [ 0.130373] pnp 00:09: [io 0x008c-0x008e] [ 0.130377] pnp 00:09: [io 0x0090-0x009f] [ 0.130382] pnp 00:09: [io 0x00a2-0x00bf] [ 0.130387] pnp 00:09: [io 0x00e0-0x00ef] [ 0.130392] pnp 00:09: [io 0x03e0-0x03e7] [ 0.130397] pnp 00:09: [io 0x04d0-0x04d1] [ 0.130402] pnp 00:09: [io 0x0800-0x087f] [ 0.130407] pnp 00:09: [io 0x0400-0x041f] [ 0.130413] pnp 00:09: [io 0x0000-0xffffffff disabled] [ 0.130418] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.130673] system 00:09: [io 0x03e0-0x03e7] has been reserved [ 0.130753] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.130826] system 00:09: [io 0x0800-0x087f] has been reserved [ 0.130899] system 00:09: [io 0x0400-0x041f] has been reserved [ 0.131020] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.131096] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131223] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.131228] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.131438] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.131517] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.131592] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.131712] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.131906] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.132012] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.132319] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.132325] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.132330] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.132335] pnp 00:0c: [mem 0x00100000-0x3befffff] [ 0.132340] pnp 00:0c: [mem 0xfec00000-0xffffffff] [ 0.132354] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.132468] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.132580] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.132692] pnp 00:0c: disabling [mem 0x00100000-0x3befffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x01ffffff pref] [ 0.133100] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.133182] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.133671] pnp 00:0d: [bus 80-ff] [ 0.133677] pnp 00:0d: [io 0x0000 window] [ 0.133682] pnp 00:0d: [mem 0xfeb00000-0xfebfffff window] [ 0.133867] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.133957] pnp: PnP ACPI: found 14 devices [ 0.133998] ACPI: ACPI bus type pnp unregistered [ 0.168819] Switching to clocksource acpi_pm [ 0.168957] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000 [ 0.168966] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 400000 [ 0.168982] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000 [ 0.168982] pci 0000:00:02.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.168982] pci 0000:00:03.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.168982] pci 0000:00:02.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.168982] pci 0000:00:02.0: BAR 8: assigned [mem 0x3bf00000-0x3c2fffff] [ 0.168982] pci 0000:00:03.0: BAR 9: assigned [mem 0x3c300000-0x3c4fffff 64bit pref] [ 0.168982] pci 0000:00:02.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.168982] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.168982] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfe9fffff] [ 0.168982] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.168982] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.168982] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] [ 0.168982] pci 0000:00:02.0: bridge window [mem 0x3bf00000-0x3c2fffff] [ 0.168982] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref] [ 0.168989] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.169071] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.169147] pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.169224] pci 0000:00:03.0: bridge window [mem 0x3c300000-0x3c4fffff 64bit pref] [ 0.169337] pci 0000:80:00.0: PCI bridge to [bus 82-82] [ 0.169418] pci 0000:80:00.1: PCI bridge to [bus 81-81] [ 0.169510] pci 0000:00:01.0: setting latency timer to 64 [ 0.169519] pci 0000:00:02.0: enabling device (0106 -> 0107) [ 0.169635] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.169640] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.169646] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.169652] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.169658] pci_bus 0000:00: resource 8 [mem 0x3bf00000-0xdfffffff] [ 0.169663] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfeafffff] [ 0.169670] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfe9fffff] [ 0.169676] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref] [ 0.169682] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.169687] pci_bus 0000:02: resource 1 [mem 0x3bf00000-0x3c2fffff] [ 0.169693] pci_bus 0000:02: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref] [ 0.169700] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.169705] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.169712] pci_bus 0000:03: resource 2 [mem 0x3c300000-0x3c4fffff 64bit pref] [ 0.169718] pci_bus 0000:80: resource 4 [mem 0xfeb00000-0xfebfffff] [ 0.169800] NET: Registered protocol family 2 [ 0.169968] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.170408] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.171962] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.172749] TCP: Hash tables configured (established 131072 bind 65536) [ 0.172827] TCP: reno registered [ 0.172900] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.172992] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.173256] NET: Registered protocol family 1 [ 0.173496] RPC: Registered named UNIX socket transport module. [ 0.173569] RPC: Registered udp transport module. [ 0.173637] RPC: Registered tcp transport module. [ 0.173706] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.173789] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.173900] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.174060] pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030 [ 0.174065] pci 0000:00:10.0: Performing full reset [ 0.174101] pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x8030 [ 0.174106] pci 0000:00:10.1: Performing full reset [ 0.174140] pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x8030 [ 0.174144] pci 0000:00:10.2: Performing full reset [ 0.174220] pci 0000:01:00.0: Boot video device [ 0.174244] PCI: CLS 32 bytes, default 64 [ 0.174331] Trying to unpack rootfs image as initramfs... [ 0.698761] Freeing initrd memory: 1380k freed [ 0.701190] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 0.701270] apm: overridden by ACPI. [ 0.701421] microcode: no support for this CPU vendor [ 0.702116] audit: initializing netlink socket (disabled) [ 0.702214] type=2000 audit(1359924636.701:1): initialized [ 0.737293] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.744567] VFS: Disk quotas dquot_6.5.2 [ 0.744811] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.746975] NFS: Registering the id_resolver key type [ 0.747157] Key type id_resolver registered [ 0.747226] Key type id_legacy registered [ 0.747811] msgmni has been set to 1757 [ 0.748166] SELinux: Registering netfilter hooks [ 0.748917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.749090] io scheduler noop registered [ 0.749159] io scheduler deadline registered [ 0.749243] io scheduler cfq registered (default) [ 0.750796] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.015142] serial8250: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A [ 1.279139] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.300437] 00:06: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A [ 1.321356] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.322058] Non-volatile memory driver v1.3 [ 1.322215] VIA RNG detected [ 1.322381] Linux agpgart interface v0.103 [ 1.322475] agpgart: Detected VIA P4M900 chipset [ 1.324428] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xfc000000 [ 1.324626] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 1.334329] viafb: Probing I2C bus 0x26 [ 1.364604] EDID: SAM SyncMaster [ 1.393786] viafb: Probing I2C bus 0x31 [ 1.705025] Refined TSC clocksource calibration: 1817.757 MHz. [ 1.705099] Switching to clocksource tsc [ 2.017016] viafb: Probing I2C bus 0x2C [ 2.641017] viafb: Finished I2C bus probing [ 2.881962] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 2.882163] ACPI: Sleep Button [SLPB] [ 2.882378] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.882486] ACPI: Power Button [PWRB] [ 2.882695] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.882801] ACPI: Power Button [PWRF] [ 2.883516] ACPI: Requesting acpi_cpufreq [ 2.894613] [drm] Initialized drm 1.1.0 20060810 [ 2.901821] modprobe (647) used greatest stack depth: 6828 bytes left [ 2.904882] brd: module loaded [ 2.907552] loop: module loaded [ 2.908195] ahci 0000:00:0f.0: version 3.0 [ 2.908258] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ [ 2.908337] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP [ 2.908490] ahci 0000:00:0f.0: PCI: Disallowing DAC for device [ 2.908586] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.908695] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part [ 2.911070] scsi0 : ahci [ 2.911410] scsi1 : ahci [ 2.911689] scsi2 : ahci [ 2.911957] scsi3 : ahci [ 2.912546] ata1: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffd00 irq 21 [ 2.912657] ata2: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffd80 irq 21 [ 2.912762] ata3: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffe00 irq 21 [ 2.912866] ata4: SATA max UDMA/133 abar m1024@0xfafffc00 port 0xfafffe80 irq 21 [ 2.913659] pata_via 0000:00:0f.1: version 0.3.4 [ 2.914637] scsi4 : pata_via [ 2.914914] scsi5 : pata_via [ 2.917323] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 2.917404] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 2.917930] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 2.922394] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1c800, 00:40:63:f6:43:7a, IRQ 23 [ 2.923275] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1 [ 2.923536] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.15 [ 2.923641] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc. [ 2.923711] Copyright (c) 2004 Red Hat Inc. [ 2.924614] eth1: VIA Networking Velocity Family Gigabit Ethernet Adapter [ 2.924693] eth1: Ethernet Address: 00:40:63:f6:43:79 [ 2.935308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.935387] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 2.935541] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 2.935748] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 2.935862] ehci_hcd 0000:00:10.4: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 2.935870] ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024 [ 2.935906] ehci_hcd 0000:00:10.4: debug port 1 [ 2.935982] ehci_hcd 0000:00:10.4: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 2.935991] ehci_hcd 0000:00:10.4: MWI active [ 2.935996] ehci_hcd 0000:00:10.4: supports USB remote wakeup [ 2.936051] ehci_hcd 0000:00:10.4: irq 22, io mem 0xfafff800 [ 2.936129] ehci_hcd 0000:00:10.4: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.942013] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 2.942129] usb usb1: default language 0x0409 [ 2.942142] usb usb1: udev 1, busnum 1, minor = 0 [ 2.942148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.942222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.942327] usb usb1: Product: EHCI Host Controller [ 2.942398] usb usb1: Manufacturer: Linux 3.5.7-gentoo ehci_hcd [ 2.943207] usb usb1: SerialNumber: 0000:00:10.4 [ 2.943502] usb usb1: usb_probe_device [ 2.943510] usb usb1: configuration #1 chosen from 1 choice [ 2.943526] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.943631] hub 1-0:1.0: usb_probe_interface [ 2.943636] hub 1-0:1.0: usb_probe_interface - got id [ 2.943641] hub 1-0:1.0: USB hub found [ 2.943719] hub 1-0:1.0: 6 ports detected [ 2.943788] hub 1-0:1.0: standalone hub [ 2.943793] hub 1-0:1.0: no power switching (usb 1.0) [ 2.943797] hub 1-0:1.0: individual port over-current protection [ 2.943802] hub 1-0:1.0: power on to power good time: 20ms [ 2.943810] hub 1-0:1.0: local power source is good [ 2.943816] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.944025] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.944098] ohci_hcd: block sizes: ed 64 td 64 [ 2.944206] uhci_hcd: USB Universal Host Controller Interface driver [ 2.944350] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.944569] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.944683] uhci_hcd 0000:00:10.0: detected 2 ports [ 2.944756] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.944761] uhci_hcd 0000:00:10.0: Performing full reset [ 2.944775] uhci_hcd 0000:00:10.0: supports USB remote wakeup [ 2.944814] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000cc00 [ 2.944948] usb usb2: default language 0x0409 [ 2.944961] usb usb2: udev 1, busnum 2, minor = 128 [ 2.944967] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.945080] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.945185] usb usb2: Product: UHCI Host Controller [ 2.945258] usb usb2: Manufacturer: Linux 3.5.7-gentoo uhci_hcd [ 2.945330] usb usb2: SerialNumber: 0000:00:10.0 [ 2.945627] usb usb2: usb_probe_device [ 2.945634] usb usb2: configuration #1 chosen from 1 choice [ 2.945651] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.945753] hub 2-0:1.0: usb_probe_interface [ 2.945759] hub 2-0:1.0: usb_probe_interface - got id [ 2.945763] hub 2-0:1.0: USB hub found [ 2.945841] hub 2-0:1.0: 2 ports detected [ 2.945911] hub 2-0:1.0: standalone hub [ 2.945916] hub 2-0:1.0: no power switching (usb 1.0) [ 2.945920] hub 2-0:1.0: individual port over-current protection [ 2.945925] hub 2-0:1.0: power on to power good time: 2ms [ 2.945933] hub 2-0:1.0: local power source is good [ 2.945938] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.946048] ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.0 [ 2.946093] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.946335] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 2.946448] uhci_hcd 0000:00:10.1: detected 2 ports [ 2.946521] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.946525] uhci_hcd 0000:00:10.1: Performing full reset [ 2.946540] uhci_hcd 0000:00:10.1: supports USB remote wakeup [ 2.946556] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d000 [ 2.946687] usb usb3: default language 0x0409 [ 2.946700] usb usb3: udev 1, busnum 3, minor = 256 [ 2.946706] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.946779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.946884] usb usb3: Product: UHCI Host Controller [ 2.946955] usb usb3: Manufacturer: Linux 3.5.7-gentoo uhci_hcd [ 2.947065] usb usb3: SerialNumber: 0000:00:10.1 [ 2.947374] usb usb3: usb_probe_device [ 2.947382] usb usb3: configuration #1 chosen from 1 choice [ 2.947399] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 2.947496] hub 3-0:1.0: usb_probe_interface [ 2.947501] hub 3-0:1.0: usb_probe_interface - got id [ 2.947506] hub 3-0:1.0: USB hub found [ 2.947587] hub 3-0:1.0: 2 ports detected [ 2.947656] hub 3-0:1.0: standalone hub [ 2.947661] hub 3-0:1.0: no power switching (usb 1.0) [ 2.947665] hub 3-0:1.0: individual port over-current protection [ 2.947670] hub 3-0:1.0: power on to power good time: 2ms [ 2.947678] hub 3-0:1.0: local power source is good [ 2.947683] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 2.947764] ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.1 [ 2.947810] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.948072] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 2.948186] uhci_hcd 0000:00:10.2: detected 2 ports [ 2.948260] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 2.948265] uhci_hcd 0000:00:10.2: Performing full reset [ 2.948279] uhci_hcd 0000:00:10.2: supports USB remote wakeup [ 2.948295] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d080 [ 2.948436] usb usb4: default language 0x0409 [ 2.948449] usb usb4: udev 1, busnum 4, minor = 384 [ 2.948455] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.948529] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.948634] usb usb4: Product: UHCI Host Controller [ 2.948706] usb usb4: Manufacturer: Linux 3.5.7-gentoo uhci_hcd [ 2.948778] usb usb4: SerialNumber: 0000:00:10.2 [ 2.949130] usb usb4: usb_probe_device [ 2.949139] usb usb4: configuration #1 chosen from 1 choice [ 2.949156] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 2.949257] hub 4-0:1.0: usb_probe_interface [ 2.949262] hub 4-0:1.0: usb_probe_interface - got id [ 2.949267] hub 4-0:1.0: USB hub found [ 2.949347] hub 4-0:1.0: 2 ports detected [ 2.949417] hub 4-0:1.0: standalone hub [ 2.949422] hub 4-0:1.0: no power switching (usb 1.0) [ 2.949426] hub 4-0:1.0: individual port over-current protection [ 2.949431] hub 4-0:1.0: power on to power good time: 2ms [ 2.949439] hub 4-0:1.0: local power source is good [ 2.949444] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 2.949523] ehci_hcd 0000:00:10.4: HS companion for 0000:00:10.2 [ 2.949716] usbcore: registered new interface driver usblp [ 2.949788] Initializing USB Mass Storage driver... [ 2.949971] usbcore: registered new interface driver usb-storage [ 2.950068] USB Mass Storage support registered. [ 2.950256] usbcore: registered new interface driver libusual [ 2.950522] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.950594] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.950952] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.951379] mousedev: PS/2 mouse device common for all mice [ 2.952067] rtc_cmos 00:02: RTC can wake from S4 [ 2.952507] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.952622] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 2.952776] md: raid0 personality registered for level 0 [ 2.952847] md: raid1 personality registered for level 1 [ 2.953413] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.953654] cpuidle: using governor ladder [ 2.953723] cpuidle: using governor menu [ 2.953792] EFI Variables Facility v0.08 2004-May-17 [ 2.978319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.980230] Netfilter messages via NETLINK v0.30. [ 2.980331] nf_conntrack version 0.5.0 (14057 buckets, 56228 max) [ 2.980872] ctnetlink v0.93: registering with nfnetlink. [ 2.981333] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.981489] TCP: cubic registered [ 2.981557] Initializing XFRM netlink socket [ 2.982241] NET: Registered protocol family 10 [ 2.982765] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.982905] sit: IPv6 over IPv4 tunneling driver [ 2.983516] NET: Registered protocol family 17 [ 2.983644] Key type dns_resolver registered [ 2.983805] Using IPI No-Shortcut mode [ 2.984285] PM: Hibernation image not present or could not be loaded. [ 2.984310] registered taskstats version 1 [ 2.984951] Magic number: 1:110:851 [ 2.985248] console [netcon0] enabled [ 2.985317] netconsole: network logging started [ 2.985850] ALSA device list: [ 2.985920] #0: HDA VIA VT82xx at 0xfebfc000 irq 17 [ 3.043022] Marking TSC unstable due to cpufreq changes [ 3.043163] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 3.043249] Switching to clocksource acpi_pm [ 3.045036] uhci_hcd 0000:00:10.0: port 1 portsc 008a,00 [ 3.045062] uhci_hcd 0000:00:10.0: port 2 portsc 008a,00 [ 3.047032] uhci_hcd 0000:00:10.1: port 1 portsc 008a,00 [ 3.047056] uhci_hcd 0000:00:10.1: port 2 portsc 008a,00 [ 3.049032] uhci_hcd 0000:00:10.2: port 1 portsc 008a,00 [ 3.049055] uhci_hcd 0000:00:10.2: port 2 portsc 008a,00 [ 3.145041] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.147034] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.149032] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.218059] ata1: SATA link down (SStatus 0 SControl 300) [ 3.218226] ata3: SATA link down (SStatus 0 SControl 300) [ 3.373048] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.377296] ata2.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 3.377389] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.382309] ata2.00: configured for UDMA/133 [ 3.382735] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 [ 3.383774] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.384080] sd 1:0:0:0: [sda] Write Protect is off [ 3.384172] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.384239] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.385628] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.422978] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.425339] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.526045] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.530184] ata4.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 3.530276] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.534466] ata4.00: configured for UDMA/133 [ 3.534877] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 [ 3.535908] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.536209] sd 3:0:0:0: [sdb] Write Protect is off [ 3.536299] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.536366] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.537739] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 4.204047] usb usb2: suspend_rh (auto-stop) [ 4.204078] usb usb3: suspend_rh (auto-stop) [ 4.204104] usb usb4: suspend_rh (auto-stop) [ 4.346140] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 4.348443] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.348596] Freeing unused kernel memory: 456k freed [ 4.349544] Write protecting the kernel text: 5416k [ 4.349774] Write protecting the kernel read-only data: 1536k [ 4.627912] sed (1309) used greatest stack depth: 6748 bytes left [ 4.725380] grep (1441) used greatest stack depth: 6700 bytes left [ 5.275689] grep (2190) used greatest stack depth: 6672 bytes left [ 5.378977] mdev (2269) used greatest stack depth: 6576 bytes left [ 5.387570] md: Autodetecting RAID arrays. [ 5.507690] md: Scanned 8 and added 8 devices. [ 5.507700] md: autorun ... [ 5.507707] md: considering sdb6 ... [ 5.507738] md: adding sdb6 ... [ 5.507756] md: sdb5 has different UUID to sdb6 [ 5.507776] md: sdb3 has different UUID to sdb6 [ 5.507795] md: sdb1 has different UUID to sdb6 [ 5.507820] md: adding sda6 ... [ 5.507841] md: sda5 has different UUID to sdb6 [ 5.507861] md: sda3 has different UUID to sdb6 [ 5.507881] md: sda1 has different UUID to sdb6 [ 5.509309] md: created md6 [ 5.509323] md: bind [ 5.509378] md: bind [ 5.509418] md: running: [ 5.526384] bio: create slab at 1 [ 5.526623] md/raid1:md6: active with 2 out of 2 mirrors [ 5.526700] md6: detected capacity change from 0 to 1928246657024 [ 5.526956] md: considering sdb5 ... [ 5.526989] md: adding sdb5 ... [ 5.527047] md: sdb3 has different UUID to sdb5 [ 5.527068] md: sdb1 has different UUID to sdb5 [ 5.527095] md: adding sda5 ... [ 5.527116] md: sda3 has different UUID to sdb5 [ 5.527136] md: sda1 has different UUID to sdb5 [ 5.527147] md: created md5 [ 5.527155] md: bind [ 5.527209] md: bind [ 5.527257] md: running: [ 5.542969] md/raid1:md5: active with 2 out of 2 mirrors [ 5.543058] md5: detected capacity change from 0 to 50001346560 [ 5.543225] md: considering sdb3 ... [ 5.543243] md: adding sdb3 ... [ 5.543256] md: sdb1 has different UUID to sdb3 [ 5.543270] md: adding sda3 ... [ 5.543282] md: sda1 has different UUID to sdb3 [ 5.544422] md: created md3 [ 5.544432] md: bind [ 5.544461] md: bind [ 5.544481] md: running: [ 5.554289] md/raid1:md3: active with 2 out of 2 mirrors [ 5.554338] md3: detected capacity change from 0 to 20003815424 [ 5.554506] md: considering sdb1 ... [ 5.554524] md: adding sdb1 ... [ 5.554539] md: adding sda1 ... [ 5.555640] md: created md1 [ 5.555649] md: bind [ 5.555677] md: bind [ 5.555696] md: running: [ 5.565393] md/raid1:md1: active with 2 out of 2 mirrors [ 5.565441] md1: detected capacity change from 0 to 98566144 [ 5.565613] md: ... autorun DONE. [ 5.565701] mdstart (2279) used greatest stack depth: 6460 bytes left [ 5.568696] md1: unknown partition table [ 5.596802] md3: unknown partition table [ 5.609509] md6: unknown partition table [ 5.635549] md5: unknown partition table [ 5.706396] mdadm (2352) used greatest stack depth: 6104 bytes left [ 5.740253] EXT4-fs (md5): INFO: recovery required on readonly filesystem [ 5.740267] EXT4-fs (md5): write access will be enabled during recovery [ 6.080811] EXT4-fs (md5): recovery complete [ 6.103924] EXT4-fs (md5): mounted filesystem with ordered data mode. Opts: (null) [ 704.560223] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 704.560259] ehci_hcd 0000:00:10.4: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 704.560281] hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s [ 704.664037] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 [ 704.715323] ehci_hcd 0000:00:10.4: port 2 reset complete, port enabled [ 704.715345] ehci_hcd 0000:00:10.4: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 704.766036] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 704.817341] ehci_hcd 0000:00:10.4: port 2 reset complete, port enabled [ 704.817362] ehci_hcd 0000:00:10.4: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 704.880495] usb 1-2: default language 0x0409 [ 704.880873] usb 1-2: udev 2, busnum 1, minor = 1 [ 704.880886] usb 1-2: New USB device found, idVendor=059b, idProduct=0370 [ 704.880898] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 704.880910] usb 1-2: Product: External HD [ 704.880921] usb 1-2: Manufacturer: Iomega [ 704.880932] usb 1-2: SerialNumber: 9225FFFFFFFF [ 704.881346] usb 1-2: usb_probe_device [ 704.881362] usb 1-2: configuration #1 chosen from 1 choice [ 704.881620] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 704.882067] usb-storage 1-2:1.0: usb_probe_interface [ 704.882101] usb-storage 1-2:1.0: usb_probe_interface - got id [ 704.882274] scsi6 : usb-storage 1-2:1.0 [ 705.884865] scsi 6:0:0:0: Direct-Access ST350083 0AS PQ: 0 ANSI: 2 CCS [ 705.886414] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 705.886727] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 705.887702] sd 6:0:0:0: [sdc] Write Protect is off [ 705.887805] sd 6:0:0:0: [sdc] Mode Sense: 34 00 00 00 [ 705.888828] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 705.912656] sdc: sdc1 [ 705.915809] sd 6:0:0:0: [sdc] Attached SCSI disk [ 723.772176] EXT3-fs (sdc): error: can't find ext3 filesystem on dev sdc. [ 723.775670] EXT4-fs (sdc): VFS: Can't find ext4 filesystem [ 723.778661] EXT4-fs (sdc): VFS: Can't find ext4 filesystem [ 723.781669] FAT-fs (sdc): invalid media value (0xb9) [ 723.781765] FAT-fs (sdc): Can't find a valid FAT filesystem [ 723.784670] FAT-fs (sdc): invalid media value (0xb9) [ 723.784768] FAT-fs (sdc): Can't find a valid FAT filesystem [ 723.818783] ISOFS: Unable to identify CD-ROM format. [ 739.677713] EXT4-fs (sdc1): recovery complete [ 739.678313] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)