[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=4e8a9c0c-8ad7-4672-9ec5-bcac1579615f ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000cffee000 (reserved) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] modified: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000cffee000 (reserved) [ 0.000000] modified: 00000000cfff0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 12000-14000 [ 0.000000] RAMDISK: 37323000 - 37fef772 [ 0.000000] ACPI: RSDP 00000000000fb840 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff90100 0006C (v01 041410 XSDT1746 20100414 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 041410 FACP1746 20100414 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff90460 09CEF (v01 A1258 A1258000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cffa8000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 00090 (v01 041410 APIC1746 20100414 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90420 0003C (v01 041410 OEMMCFG 20100414 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa8040 0007A (v01 041410 OEMB1746 20100414 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cff9a150 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cff9a240 00038 (v01 041410 OEMHPET0 20100414 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000cffa80c0 00124 (v01 041410 AMDINFO 20100414 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cffa81f0 00284 (v01 041410 NVHDCP 20100414 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9a280 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000 [ 0.000000] NUMA: Allocated memnodemap from 13000 - 15640 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000015640 - 000000000001a63f] [ 0.000000] bootmap [000000000001b000 - 0000000000040fff] pages 26 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [0037323000 - 0037fef772] RAMDISK ==> [0037323000 - 0037fef772] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a290] BRK ==> [0001a2a000 - 0001a2a290] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] #8 [0000013000 - 0000015640] MEMNODEMAP ==> [0000013000 - 0000015640] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048350 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 105 pages reserved [ 0.000000] DMA zone: 3821 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffee000 [ 0.000000] PM: Registered nosave memory: 00000000cffee000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u262144 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031221 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=4e8a9c0c-8ad7-4672-9ec5-bcac1579615f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4043976k/4980736k available (5409k kernel code, 787336k absent, 149424k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:456 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2612.883 MHz processor. [ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5225.76 BogoMIPS (lpj=26128800) [ 0.020025] Security Framework initialized [ 0.020040] AppArmor: AppArmor initialized [ 0.020305] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022101] Mount-cache hash table entries: 256 [ 0.022206] Initializing cgroup subsys ns [ 0.022209] Initializing cgroup subsys cpuacct [ 0.022212] Initializing cgroup subsys memory [ 0.022218] Initializing cgroup subsys devices [ 0.022220] Initializing cgroup subsys freezer [ 0.022222] Initializing cgroup subsys net_cls [ 0.022237] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.022239] CPU: L2 Cache: 512K (64 bytes/line) [ 0.022241] CPU 0/0x0 -> Node 0 [ 0.022243] tseg: 0000000000 [ 0.022255] CPU: Physical Processor ID: 0 [ 0.022256] CPU: Processor Core ID: 0 [ 0.022259] mce: CPU supports 6 MCE banks [ 0.022267] Performance Events: AMD PMU driver. [ 0.022270] ... version: 0 [ 0.022272] ... bit width: 48 [ 0.022273] ... generic registers: 4 [ 0.022274] ... value mask: 0000ffffffffffff [ 0.022276] ... max period: 00007fffffffffff [ 0.022277] ... fixed-purpose events: 0 [ 0.022279] ... event mask: 000000000000000f [ 0.023627] ACPI: Core revision 20090903 [ 0.038629] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.038633] ftrace: allocating 22518 entries in 89 pages [ 0.040078] Setting APIC routing to flat [ 0.040545] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.144408] CPU0: AMD Athlon(tm) II X4 620 Processor stepping 02 [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.300074] CPU1: AMD Athlon(tm) II X4 620 Processor stepping 02 [ 0.300084] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.310055] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 2/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 2 [ 0.470069] CPU2: AMD Athlon(tm) II X4 620 Processor stepping 02 [ 0.470079] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.480058] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 3 [ 0.640067] CPU3: AMD Athlon(tm) II X4 620 Processor stepping 02 [ 0.640076] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.650008] Brought up 4 CPUs [ 0.650020] Total of 4 processors activated (20903.99 BogoMIPS). [ 0.650343] CPU0 attaching sched-domain: [ 0.650345] domain 0: span 0-3 level MC [ 0.650347] groups: 0 1 2 3 [ 0.650351] CPU1 attaching sched-domain: [ 0.650353] domain 0: span 0-3 level MC [ 0.650354] groups: 1 2 3 0 [ 0.650358] CPU2 attaching sched-domain: [ 0.650359] domain 0: span 0-3 level MC [ 0.650361] groups: 2 3 0 1 [ 0.650364] CPU3 attaching sched-domain: [ 0.650365] domain 0: span 0-3 level MC [ 0.650367] groups: 3 0 1 2 [ 0.650448] devtmpfs: initialized [ 0.650448] regulator: core version 0.5 [ 0.650448] Time: 15:54:10 Date: 06/17/10 [ 0.650448] NET: Registered protocol family 16 [ 0.650448] Trying to unpack rootfs image as initramfs... [ 0.650448] node 0 link 0: io port [1000, ffffff] [ 0.650448] node 0 link 0: io port [1000, 1fff] [ 0.650448] TOM: 00000000d0000000 aka 3328M [ 0.650448] Fam 10h mmconf [e0000000, efffffff] [ 0.650448] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.650448] node 0 link 0: mmio [a0000, bffff] [ 0.650448] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [f0000000, fe0bffff] [ 0.650448] TOM2: 0000000130000000 aka 4864M [ 0.650448] bus: [00,07] on node 0 link 0 [ 0.650448] bus: 00 index 0 io port: [0, ffff] [ 0.650448] bus: 00 index 1 mmio: [a0000, bffff] [ 0.650448] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.650448] bus: 00 index 3 mmio: [f0000000, ffffffff] [ 0.650448] bus: 00 index 4 mmio: [130000000, fcffffffff] [ 0.650448] ACPI: bus type pci registered [ 0.650448] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.650448] PCI: Not using MMCONFIG. [ 0.650448] PCI: Using configuration type 1 for base access [ 0.650448] PCI: Using configuration type 1 for extended access [ 0.650790] bio: create slab at 0 [ 0.650816] ACPI: EC: Look up EC in DSDT [ 0.656508] ACPI: Executed 1 blocks of module-level executable AML code [ 0.734099] ACPI: Interpreter enabled [ 0.734105] ACPI: (supports S0 S1 S3 S4 S5) [ 0.734124] ACPI: Using IOAPIC for interrupt routing [ 0.734183] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.740738] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.747277] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.759752] ACPI Warning: Incorrect checksum in table [OEMB] - 91, should be 8C (20090903/tbutils-314) [ 0.760007] ACPI: No dock devices found. [ 0.760384] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.760638] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff] [ 0.760676] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f] [ 0.760686] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f] [ 0.760690] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f] [ 0.760709] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.760714] pci 0000:00:01.1: PME# disabled [ 0.760769] pci 0000:00:01.3: reg 10 32bit mmio: [0xfbd80000-0xfbdfffff] [ 0.760891] pci 0000:00:02.0: reg 10 32bit mmio: [0xfbd7e000-0xfbd7efff] [ 0.760913] pci 0000:00:02.0: supports D1 D2 [ 0.760914] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.760917] pci 0000:00:02.0: PME# disabled [ 0.760938] pci 0000:00:02.1: reg 10 32bit mmio: [0xfbd7fc00-0xfbd7fcff] [ 0.760965] pci 0000:00:02.1: supports D1 D2 [ 0.760966] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.760969] pci 0000:00:02.1: PME# disabled [ 0.760994] pci 0000:00:04.0: reg 10 32bit mmio: [0xfbd7d000-0xfbd7dfff] [ 0.761015] pci 0000:00:04.0: supports D1 D2 [ 0.761017] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.761019] pci 0000:00:04.0: PME# disabled [ 0.761042] pci 0000:00:04.1: reg 10 32bit mmio: [0xfbd7f800-0xfbd7f8ff] [ 0.761068] pci 0000:00:04.1: supports D1 D2 [ 0.761070] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.761073] pci 0000:00:04.1: PME# disabled [ 0.761105] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.761134] pci 0000:00:07.0: reg 10 32bit mmio: [0xfbd78000-0xfbd7bfff] [ 0.761156] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.761159] pci 0000:00:07.0: PME# disabled [ 0.761210] pci 0000:00:09.0: reg 10 io port: [0xd480-0xd487] [ 0.761213] pci 0000:00:09.0: reg 14 io port: [0xd400-0xd403] [ 0.761216] pci 0000:00:09.0: reg 18 io port: [0xd080-0xd087] [ 0.761219] pci 0000:00:09.0: reg 1c io port: [0xd000-0xd003] [ 0.761222] pci 0000:00:09.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.761225] pci 0000:00:09.0: reg 24 32bit mmio: [0xfbd76000-0xfbd77fff] [ 0.761261] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfbd7c000-0xfbd7cfff] [ 0.761265] pci 0000:00:0a.0: reg 14 io port: [0xc880-0xc887] [ 0.761268] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfbd7f400-0xfbd7f4ff] [ 0.761271] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfbd7f000-0xfbd7f00f] [ 0.761290] pci 0000:00:0a.0: supports D1 D2 [ 0.761292] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.761295] pci 0000:00:0a.0: PME# disabled [ 0.761539] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.761546] pci 0000:00:10.0: PME# disabled [ 0.761818] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.761825] pci 0000:00:12.0: PME# disabled [ 0.762097] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.762104] pci 0000:00:13.0: PME# disabled [ 0.762228] pci 0000:01:08.0: reg 10 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.762274] pci 0000:00:08.0: transparent bridge [ 0.762277] pci 0000:00:08.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.762308] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.762315] pci 0000:02:00.0: reg 18 64bit mmio: [0xfbfe0000-0xfbfeffff] [ 0.762319] pci 0000:02:00.0: reg 20 io port: [0xe800-0xe8ff] [ 0.762325] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbfc0000-0xfbfdffff] [ 0.762339] pci 0000:02:00.0: supports D1 D2 [ 0.762366] pci 0000:02:00.1: reg 10 64bit mmio: [0xfbffc000-0xfbffffff] [ 0.762392] pci 0000:02:00.1: supports D1 D2 [ 0.762442] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.762449] pci 0000:00:10.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.762462] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.762641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.762879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.762970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.763028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.763082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.777027] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.777242] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.777458] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 [ 0.777668] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.777882] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.778098] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *11 [ 0.778308] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.778520] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.778731] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.778944] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.779155] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.779367] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.779583] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.779793] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.780031] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.780247] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.780462] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15 [ 0.780674] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.780885] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.781096] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.781306] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.781517] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.781729] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.781945] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.782157] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.782369] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.782581] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.782794] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.783007] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.783217] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.783429] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.783641] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.783852] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.784063] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.784275] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.784487] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.784703] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.784919] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 [ 0.785134] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.785349] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15 [ 0.785564] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled. [ 0.785783] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.785999] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 0.786214] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.786460] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.786676] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11 [ 0.786891] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.786996] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.786999] vgaarb: loaded [ 0.787079] SCSI subsystem initialized [ 0.787137] libata version 3.00 loaded. [ 0.787137] usbcore: registered new interface driver usbfs [ 0.787137] usbcore: registered new interface driver hub [ 0.787137] usbcore: registered new device driver usb [ 0.787137] ACPI: WMI: Mapper loaded [ 0.787137] PCI: Using ACPI for IRQ routing [ 0.787137] NetLabel: Initializing [ 0.787137] NetLabel: domain hash size = 128 [ 0.787137] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.787137] NetLabel: unlabeled traffic allowed by default [ 0.787137] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.787137] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.810024] Switching to clocksource tsc [ 0.811141] AppArmor: AppArmor Filesystem Enabled [ 0.811156] pnp: PnP ACPI init [ 0.811172] ACPI: bus type pnp registered [ 0.813431] pnp 00:05: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.813434] pnp 00:05: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.818217] pnp: PnP ACPI: found 13 devices [ 0.818219] ACPI: ACPI bus type pnp unregistered [ 0.818229] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.818231] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.818233] system 00:05: ioport range 0x500-0x57f has been reserved [ 0.818235] system 00:05: ioport range 0x580-0x5ff has been reserved [ 0.818237] system 00:05: ioport range 0x800-0x87f could not be reserved [ 0.818239] system 00:05: ioport range 0x880-0x8ff has been reserved [ 0.818241] system 00:05: ioport range 0xd00-0xd7f has been reserved [ 0.818243] system 00:05: ioport range 0xd80-0xdff has been reserved [ 0.818246] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.818248] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.818253] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.818255] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.818258] system 00:09: ioport range 0x230-0x23f has been reserved [ 0.818260] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.818262] system 00:09: ioport range 0xa00-0xa0f has been reserved [ 0.818264] system 00:09: ioport range 0xa10-0xa1f has been reserved [ 0.818268] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.818271] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.818273] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.818275] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.818277] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved [ 0.818279] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.823003] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.823005] pci 0000:00:08.0: IO window: disabled [ 0.823008] pci 0000:00:08.0: MEM window: 0xfbe00000-0xfbefffff [ 0.823010] pci 0000:00:08.0: PREFETCH window: disabled [ 0.823014] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 [ 0.823018] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.823027] pci 0000:00:10.0: MEM window: 0xfbf00000-0xfbffffff [ 0.823034] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.823046] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 [ 0.823048] pci 0000:00:12.0: IO window: disabled [ 0.823057] pci 0000:00:12.0: MEM window: disabled [ 0.823063] pci 0000:00:12.0: PREFETCH window: disabled [ 0.823075] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 [ 0.823076] pci 0000:00:13.0: IO window: disabled [ 0.823085] pci 0000:00:13.0: MEM window: disabled [ 0.823091] pci 0000:00:13.0: PREFETCH window: disabled [ 0.823107] pci 0000:00:08.0: setting latency timer to 64 [ 0.823424] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.823427] alloc irq_desc for 19 on node 0 [ 0.823428] alloc kstat_irqs on node 0 [ 0.823436] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.823443] pci 0000:00:10.0: setting latency timer to 64 [ 0.823748] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.823750] alloc irq_desc for 18 on node 0 [ 0.823751] alloc kstat_irqs on node 0 [ 0.823757] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.823764] pci 0000:00:12.0: setting latency timer to 64 [ 0.824068] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 0.824069] alloc irq_desc for 17 on node 0 [ 0.824071] alloc kstat_irqs on node 0 [ 0.824077] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 0.824084] pci 0000:00:13.0: setting latency timer to 64 [ 0.824089] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.824091] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.824093] pci_bus 0000:01: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.824095] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.824097] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.824099] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.824100] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.824102] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.824136] NET: Registered protocol family 2 [ 0.824267] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.825191] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.827766] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.828083] TCP: Hash tables configured (established 524288 bind 65536) [ 0.828086] TCP reno registered [ 0.828180] NET: Registered protocol family 1 [ 0.909905] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.910007] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.910113] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.910286] pci 0000:02:00.0: Boot video device [ 0.910513] PCI-DMA: Disabling AGP. [ 0.910594] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.910596] PCI-DMA: using GART IOMMU. [ 0.910598] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.911932] Scanning for low memory corruption every 60 seconds [ 0.912030] audit: initializing netlink socket (disabled) [ 0.912038] type=2000 audit(1276790049.909:1): initialized [ 0.918764] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.919753] VFS: Disk quotas dquot_6.5.2 [ 0.919794] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.920242] fuse init (API version 7.13) [ 0.920302] msgmni has been set to 7898 [ 0.920520] alg: No test for stdrng (krng) [ 0.920560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.920563] io scheduler noop registered [ 0.920564] io scheduler anticipatory registered [ 0.920566] io scheduler deadline registered [ 0.920592] io scheduler cfq registered (default) [ 0.920900] alloc irq_desc for 24 on node 0 [ 0.920902] alloc kstat_irqs on node 0 [ 0.920921] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.920939] pcieport 0000:00:10.0: setting latency timer to 64 [ 0.921347] alloc irq_desc for 25 on node 0 [ 0.921348] alloc kstat_irqs on node 0 [ 0.921364] pcieport 0000:00:12.0: irq 25 for MSI/MSI-X [ 0.921382] pcieport 0000:00:12.0: setting latency timer to 64 [ 0.921754] alloc irq_desc for 26 on node 0 [ 0.921755] alloc kstat_irqs on node 0 [ 0.921770] pcieport 0000:00:13.0: irq 26 for MSI/MSI-X [ 0.921788] pcieport 0000:00:13.0: setting latency timer to 64 [ 0.921939] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.921955] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.922034] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.922037] ACPI: Power Button [PWRB] [ 0.922074] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.922076] ACPI: Power Button [PWRF] [ 0.922651] processor LNXCPU:00: registered as cooling_device0 [ 0.922968] processor LNXCPU:01: registered as cooling_device1 [ 0.923284] processor LNXCPU:02: registered as cooling_device2 [ 0.923604] processor LNXCPU:03: registered as cooling_device3 [ 0.929922] Linux agpgart interface v0.103 [ 0.929966] efifb: probing for efifb [ 0.930177] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 7552k, total 7552k [ 0.930179] efifb: mode is 1600x1200x32, linelength=6400, pages=1 [ 0.930180] efifb: scrolling: redraw [ 0.930182] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.930206] fb0: EFI VGA frame buffer device [ 0.930210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.930300] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.930525] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.931194] brd: module loaded [ 0.931496] loop: module loaded [ 0.931561] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.931773] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.932167] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.932170] alloc irq_desc for 23 on node 0 [ 0.932172] alloc kstat_irqs on node 0 [ 0.932180] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.932197] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 0.932202] pata_acpi 0000:00:09.0: PCI INT A disabled [ 0.932459] Fixed MDIO Bus: probed [ 0.932482] PPP generic driver version 2.4.2 [ 0.932524] tun: Universal TUN/TAP device driver, 1.6 [ 0.932525] tun: (C) 1999-2004 Max Krasnyansky [ 0.932585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.932921] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.932924] alloc irq_desc for 22 on node 0 [ 0.932925] alloc kstat_irqs on node 0 [ 0.932932] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.932949] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.932951] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.932974] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.932997] ehci_hcd 0000:00:02.1: debug port 1 [ 0.933004] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.933022] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfbd7fc00 [ 0.946520] Freeing initrd memory: 13105k freed [ 0.949772] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.949921] usb usb1: configuration #1 chosen from 1 choice [ 0.949944] hub 1-0:1.0: USB hub found [ 0.949954] hub 1-0:1.0: 6 ports detected [ 0.950483] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 0.950486] alloc irq_desc for 21 on node 0 [ 0.950488] alloc kstat_irqs on node 0 [ 0.950496] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 0.950514] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.950517] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.950548] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.950565] ehci_hcd 0000:00:04.1: debug port 1 [ 0.950572] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.950590] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfbd7f800 [ 0.969765] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.969870] usb usb2: configuration #1 chosen from 1 choice [ 0.969893] hub 2-0:1.0: USB hub found [ 0.969900] hub 2-0:1.0: 6 ports detected [ 0.969956] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.970340] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 0.970343] alloc irq_desc for 20 on node 0 [ 0.970345] alloc kstat_irqs on node 0 [ 0.970353] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 0.970371] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.970373] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.970408] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.970431] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfbd7e000 [ 1.031854] usb usb3: configuration #1 chosen from 1 choice [ 1.031878] hub 3-0:1.0: USB hub found [ 1.031886] hub 3-0:1.0: 6 ports detected [ 1.032314] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 1.032318] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 1.032337] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.032339] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.032367] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.032392] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfbd7d000 [ 1.082137] usb usb4: configuration #1 chosen from 1 choice [ 1.082158] hub 4-0:1.0: USB hub found [ 1.082166] hub 4-0:1.0: 6 ports detected [ 1.082216] uhci_hcd: USB Universal Host Controller Interface driver [ 1.082274] PNP: No PS/2 controller found. Probing ports directly. [ 1.082691] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.082700] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.082763] mice: PS/2 mouse device common for all mice [ 1.082843] rtc_cmos 00:07: RTC can wake from S4 [ 1.082871] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.082921] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.083006] device-mapper: uevent: version 1.0.3 [ 1.083098] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.083186] device-mapper: multipath: version 1.1.0 loaded [ 1.083188] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.083363] cpuidle: using governor ladder [ 1.083365] cpuidle: using governor menu [ 1.083634] TCP cubic registered [ 1.083721] NET: Registered protocol family 10 [ 1.084078] lo: Disabled Privacy Extensions [ 1.084285] NET: Registered protocol family 17 [ 1.084342] powernow-k8: Found 1 AMD Athlon(tm) II X4 620 Processor processors (4 cpu cores) (version 2.20.00) [ 1.084377] powernow-k8: 0 : pstate 0 (2600 MHz) [ 1.084378] powernow-k8: 1 : pstate 1 (1900 MHz) [ 1.084380] powernow-k8: 2 : pstate 2 (1400 MHz) [ 1.084381] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.084762] PM: Resume from disk failed. [ 1.084771] registered taskstats version 1 [ 1.085248] Magic number: 14:757:942 [ 1.085371] rtc_cmos 00:07: setting system clock to 2010-06-17 15:54:10 UTC (1276790050) [ 1.085373] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.085374] EDD information not available. [ 1.085424] Freeing unused kernel memory: 876k freed [ 1.085633] Write protecting the kernel read-only data: 7680k [ 1.101806] udev: starting version 151 [ 1.120544] vga16fb: initializing [ 1.120548] vga16fb: mapped to 0xffff8800000a0000 [ 1.120553] vga16fb: not registering due to another framebuffer present [ 1.129874] Console: switching to colour frame buffer device 200x75 [ 1.132735] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.133133] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.133139] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.133142] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.211244] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:26:18:88:36:72 [ 1.211248] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.211314] ahci 0000:00:09.0: version 3.0 [ 1.211326] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.211387] alloc irq_desc for 27 on node 0 [ 1.211389] alloc kstat_irqs on node 0 [ 1.211396] ahci 0000:00:09.0: irq 27 for MSI/MSI-X [ 1.211449] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl IDE mode [ 1.211452] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh [ 1.211456] ahci 0000:00:09.0: setting latency timer to 64 [ 1.211682] scsi0 : ahci [ 1.211802] scsi1 : ahci [ 1.211849] scsi2 : ahci [ 1.211892] scsi3 : ahci [ 1.211936] scsi4 : ahci [ 1.211981] scsi5 : ahci [ 1.212098] ata1: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76100 irq 27 [ 1.212100] ata2: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76180 irq 27 [ 1.212103] ata3: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76200 irq 27 [ 1.212105] ata4: SATA max UDMA/133 abar m8192@0xfbd76000 port 0xfbd76280 irq 27 [ 1.212107] ata5: DUMMY [ 1.212108] ata6: DUMMY [ 1.212274] pata_amd 0000:00:06.0: version 0.4.1 [ 1.212305] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.212368] scsi6 : pata_amd [ 1.212432] scsi7 : pata_amd [ 1.213386] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.213388] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.400397] ata7.01: ATAPI: ASUS DRW-1608P2S, 1.41, max UDMA/66 [ 1.400416] ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14) [ 1.440355] ata7.01: configured for UDMA/66 [ 1.520081] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 1.560045] ata3: SATA link down (SStatus 0 SControl 300) [ 1.560068] ata1: SATA link down (SStatus 0 SControl 300) [ 1.740040] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.740055] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.740584] ata4.00: ATA-7: WDC WD2000JS-22MHB0, 02.01C03, max UDMA/133 [ 1.740587] ata4.00: 390721968 sectors, multi 16: LBA48 [ 1.741196] ata4.00: configured for UDMA/133 [ 1.742051] ata2.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133 [ 1.742054] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.744528] ata2.00: configured for UDMA/133 [ 1.744612] scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5 [ 1.744787] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.744793] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.744817] sd 1:0:0:0: [sda] Write Protect is off [ 1.744820] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.744850] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.744947] scsi 3:0:0:0: Direct-Access ATA WDC WD2000JS-22M 02.0 PQ: 0 ANSI: 5 [ 1.744967] sda: [ 1.745057] sd 3:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.745085] sd 3:0:0:0: [sdb] Write Protect is off [ 1.745087] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.745089] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.745105] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.745197] sdb: [ 1.751370] scsi 6:0:1:0: CD-ROM ASUS DRW-1608P2S 1.41 PQ: 0 ANSI: 5 [ 1.755744] sdb1 sdb2 < sdb5 > [ 1.764803] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.769331] sda1 sda2 [ 1.785723] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.839393] usb 2-2: configuration #1 chosen from 1 choice [ 2.170010] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 2.312390] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.396951] usb 3-1: configuration #1 chosen from 1 choice [ 2.730041] usb 3-2: new low speed USB device using ohci_hcd and address 3 [ 2.981976] usb 3-2: configuration #1 chosen from 1 choice [ 3.330044] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 3.553284] usb 4-1: configuration #1 chosen from 1 choice [ 3.556248] hub 4-1:1.0: USB hub found [ 3.559209] hub 4-1:1.0: 4 ports detected [ 3.861249] usb 4-1.1: new low speed USB device using ohci_hcd and address 3 [ 3.985309] usb 4-1.1: configuration #1 chosen from 1 choice [ 4.071230] usb 4-1.4: new full speed USB device using ohci_hcd and address 4 [ 4.222322] usb 4-1.4: configuration #1 chosen from 1 choice [ 5.077003] udev: starting version 151 [ 5.788209] type=1505 audit(1276782855.194:2): operation="profile_load" pid=597 name="/sbin/dhclient3" [ 5.788418] type=1505 audit(1276782855.194:3): operation="profile_load" pid=597 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 5.788534] type=1505 audit(1276782855.194:4): operation="profile_load" pid=597 name="/usr/lib/connman/scripts/dhclient-script" [ 6.469960] Linux video capture interface: v2.00 [ 6.480564] uvcvideo: Found UVC 1.00 device (046d:0805) [ 6.495762] input: UVC Camera (046d:0805) as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input3 [ 6.495812] usbcore: registered new interface driver uvcvideo [ 6.495814] USB Video Class driver (v0.1.0) [ 6.514892] EDAC MC: Ver: 2.1.0 Jun 3 2010 [ 6.516962] EDAC amd64_edac: Ver: 3.2.0 Jun 3 2010 [ 6.517165] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 6.517173] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 6.517174] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 6.517176] (Note that use of the override may cause unknown side effects.) [ 6.517192] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 6.558897] parport_pc 00:04: reported by Plug and Play ACPI [ 6.558951] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 6.607722] lp: driver loaded but no devices found [ 6.612978] ACPI: resource nForce2_smbus [0x600-0x63f] conflicts with ACPI region SMRG [0x600-0x6ff] [ 6.612982] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.612984] nForce2_smbus 0000:00:01.1: Error probing SMB1. [ 6.612987] ACPI: resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f] [ 6.612989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.612991] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 6.640175] lp0: using parport0 (interrupt-driven). [ 6.787798] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 6.787802] Disabling lock debugging due to kernel taint [ 6.844131] [fglrx] Maximum main memory to use for locked dma buffers: 3800 MBytes. [ 6.844276] [fglrx] vendor: 1002 device: 9440 count: 1 [ 6.844521] [fglrx] ioport: bar 4, base 0xe800, size: 0x100 [ 6.844536] pci 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 6.844541] pci 0000:02:00.0: setting latency timer to 64 [ 6.844684] [fglrx] Kernel PAT support is enabled [ 6.844702] [fglrx] module loaded - fglrx 8.74.4 [May 27 2010] with 1 minors [ 6.850604] ppdev: user-space parallel port driver [ 6.854111] usbcore: registered new interface driver hiddev [ 6.866293] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input4 [ 6.866378] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input0 [ 6.873565] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input5 [ 6.873641] generic-usb 0003:046D:C226.0002: input,hidraw1: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:04.0-1.1/input0 [ 6.887439] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1.1/4-1.1:1.1/input/input6 [ 6.887571] generic-usb 0003:046D:C226.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:04.0-1.1/input1 [ 6.896463] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input7 [ 6.896566] generic-usb 0003:046D:C227.0004: input,hiddev97,hidraw3: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:04.0-1.4/input0 [ 6.896598] usbcore: registered new interface driver usbhid [ 6.896601] usbhid: v2.6:USB HID core driver [ 7.434624] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 7.434947] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 7.434952] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 7.434955] hda_intel: Disable MSI for Nvidia chipset [ 7.435026] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 7.437390] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16 [ 7.437395] alloc irq_desc for 16 on node 0 [ 7.437396] alloc kstat_irqs on node 0 [ 7.437406] Echoaudio Echo3G 0000:01:08.0: PCI INT A -> Link[LNKC] -> GSI 16 (level, low) -> IRQ 16 [ 7.437461] Echoaudio Echo3G 0000:01:08.0: firmware: requesting ea/echo3g_dsp.fw [ 7.499302] Echoaudio Echo3G 0000:01:08.0: firmware: requesting ea/loader_dsp.fw [ 7.568743] Echoaudio Echo3G 0000:01:08.0: firmware: requesting ea/3g_asic.fw [ 7.569009] usbcore: registered new interface driver snd-usb-audio [ 8.741279] Card registered: Gina3G rev.0 (DSP56361) at 0xfbe00000 irq 16 [ 8.790123] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input8 [ 9.346166] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 9.473884] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 9.751114] ACPI: PCI Interrupt Link [LN0B] enabled at IRQ 19 [ 9.751120] HDA Intel 0000:02:00.1: PCI INT B -> Link[LN0B] -> GSI 19 (level, low) -> IRQ 19 [ 9.751164] HDA Intel 0000:02:00.1: setting latency timer to 64 [ 11.432531] input: G15 Extra Keys as /devices/virtual/input/input9 [ 11.681790] type=1505 audit(1276782861.095:5): operation="profile_load" pid=1084 name="/usr/share/gdm/guest-session/Xsession" [ 11.683132] type=1505 audit(1276782861.095:6): operation="profile_replace" pid=1085 name="/sbin/dhclient3" [ 11.683351] type=1505 audit(1276782861.095:7): operation="profile_replace" pid=1085 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.683471] type=1505 audit(1276782861.095:8): operation="profile_replace" pid=1085 name="/usr/lib/connman/scripts/dhclient-script" [ 11.752788] type=1505 audit(1276782861.165:9): operation="profile_load" pid=1086 name="/usr/bin/evince" [ 11.755517] type=1505 audit(1276782861.165:10): operation="profile_load" pid=1086 name="/usr/bin/evince-previewer" [ 11.757239] type=1505 audit(1276782861.165:11): operation="profile_load" pid=1086 name="/usr/bin/evince-thumbnailer" [ 11.796786] type=1505 audit(1276782861.205:12): operation="profile_load" pid=1088 name="/usr/lib/cups/backend/cups-pdf" [ 11.797052] type=1505 audit(1276782861.205:13): operation="profile_load" pid=1088 name="/usr/sbin/cupsd" [ 11.851230] type=1505 audit(1276782861.265:14): operation="profile_load" pid=1089 name="/usr/sbin/mysqld-akonadi" [ 13.408402] alloc irq_desc for 28 on node 0 [ 13.408405] alloc kstat_irqs on node 0 [ 13.408412] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X [ 16.460962] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 16.460965] vboxdrv: Successfully done. [ 16.460966] vboxdrv: Found 4 processor cores. [ 16.461047] VBoxDrv: dbg - g_abExecMemory=ffffffffa04c9a20 [ 16.461076] vboxdrv: fAsync=0 offMin=0x2d1 offMax=0x17aa [ 16.461342] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 16.461342] vboxdrv: Successfully loaded version 3.1.8 (interface 0x00100001). [ 21.363889] hda-intel: IRQ timing workaround is activated for card #3. Suggest a bigger bdl_pos_adj. [ 21.984343] CPU0 attaching NULL sched-domain. [ 21.984348] CPU1 attaching NULL sched-domain. [ 21.984350] CPU2 attaching NULL sched-domain. [ 21.984352] CPU3 attaching NULL sched-domain. [ 22.050098] CPU0 attaching sched-domain: [ 22.050102] domain 0: span 0-3 level MC [ 22.050104] groups: 0 1 2 3 [ 22.050109] CPU1 attaching sched-domain: [ 22.050110] domain 0: span 0-3 level MC [ 22.050112] groups: 1 2 3 0 [ 22.050115] CPU2 attaching sched-domain: [ 22.050116] domain 0: span 0-3 level MC [ 22.050118] groups: 2 3 0 1 [ 22.050121] CPU3 attaching sched-domain: [ 22.050122] domain 0: span 0-3 level MC [ 22.050123] groups: 3 0 1 2 [ 24.010028] eth0: no IPv6 routers present