This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30-ARCH x86_64 Current Operating System: Linux rumo 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 9 15:12:10 CET 2010 x86_64 Build Date: 07 September 2009 12:15:00AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 20 14:39:00 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Acer TravelMate 5730G" (**) | |-->Device "ATI Radeon HD 3650" (**) Option "AIGLX" "true" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/misc, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/TTF, /usr/share/fonts/Type1, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x7f40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9591:1025:013c ATI Technologies Inc Mobility Radeon HD 3650 rev 0, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.4.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.4.99.906, module version = 8.69.4 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.4.99.906, module version = 8.69.4 (II) ATI Proprietary Linux Driver Version Identifier:8.69.4 (II) ATI Proprietary Linux Driver Release Identifier: 8.69 (II) ATI Proprietary Linux Driver Build Date: Dec 11 2009 14:56:51 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Chipset Supported AMD Graphics Processor (0x9591) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) fglrx(0): pEnt->device->identifier=0x1caeeb0 (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "TexturedVideo" "on" (**) fglrx(0): Option "TexturedVideoSync" "off" (**) fglrx(0): Option "DPMS" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (**) fglrx(0): Gamma Correction for I is 0x06419064 (**) fglrx(0): Gamma Correction for II is 0x06419064 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so ukiDynamicMajor: found major device number 252 ukiDynamicMajor: found major device number 252 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 9, (OK) ukiOpenByBusid: ukiOpenMinor returns 9 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3650" (Chipset = 0x9591) (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x013c) (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xcfef0000 (--) fglrx(0): I/O port at 0x00002000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 10.88 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: M86 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 30. (II) fglrx(0): IRQ 30 Enabled. (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000 (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds] (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: AUO Model: 8074 Serial#: 0 (II) fglrx(0): Year: 2006 Week: 1 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 21 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): No DPMS capabilities specified (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555 (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 71.1 MHz Image Size: 331 x 207 mm (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (WW) fglrx(0): Unknown vendor-specific block f (II) fglrx(0): AUO (II) fglrx(0): B154EW08 V0 (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0006af748000000000 (II) fglrx(0): 01100103802115780a1cf59758508e27 (II) fglrx(0): 27505400000001010101010101010101 (II) fglrx(0): 010101010101c71b00a0502017303020 (II) fglrx(0): 36004bcf100000180000000f00000000 (II) fglrx(0): 00000000000000000020000000fe0041 (II) fglrx(0): 554f0a202020202020202020000000fe (II) fglrx(0): 004231353445573038205630200a0045 (II) fglrx(0): End of Display1 EDID data -------------------- (II) fglrx(0): Output LCD using monitor section Acer TravelMate 5730G (**) fglrx(0): Option "PreferredMode" "1280x800" (II) fglrx(0): Output DFP1 using monitor section Iiyama ProLite B2409HDS (**) fglrx(0): Option "PreferredMode" "1920x1080" (**) fglrx(0): Option "LeftOf" "Acer TravelMate 5730G" (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output TV has no monitor section (II) fglrx(0): EDID vendor "AUO", prod id 32884 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) fglrx(0): Output LCD connected (II) fglrx(0): Output DFP1 disconnected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output TV disconnected (II) fglrx(0): Using user preference for initial modes (II) fglrx(0): Output LCD using initial mode 1280x800 (II) fglrx(0): Display dimensions: (330, 210) mm (II) fglrx(0): DPI set to (98, 96) (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (**) fglrx(0): OpenGL Overlay enabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (**) fglrx(0): NoDRI = NO (**) fglrx(0): Capabilities: 0x00000800 (**) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906 (WW) fglrx(0): could not detect X server version (query_status=-1) (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 252 ukiDynamicMajor: found major device number 252 ukiDynamicMajor: found major device number 252 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 12, (OK) ukiOpenByBusid: ukiOpenMinor returns 12 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f05a9c61000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.69.4 (II) fglrx(0): Date: Dec 11 2009 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-ARCH (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0100e000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2192) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1152) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 1040 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (**) fglrx(0): DPMS enabled (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/modules//glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.4.99.906, module version = 1.0.0 (II) Loading extension GLESX (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/modules//amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.4.99.906, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (WW) fglrx(0): Option "Composite" is not used (WW) fglrx(0): Option "VideoOverlay" is not used (WW) fglrx(0): Option "AllowGLXWithComposite" is not used (WW) fglrx(0): Option "AccelMethod" is not used (WW) fglrx(0): Option "DRI" is not used (WW) fglrx(0): Option "ColorTiling" is not used (WW) fglrx(0): Option "DynamicClocks" is not used (WW) fglrx(0): Option "DMAForXv" is not used (WW) fglrx(0): Option "RenderAccel" is not used (WW) fglrx(0): Option "EnablePageFlip" is not used (WW) fglrx(0): Option "Audio" is not used (WW) fglrx(0): Option "HDMI" is not used (WW) fglrx(0): Option "PreferredMode" is not used (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (==) fglrx(0): Using software cursor (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel' (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE drmDynamicMajor: found major device number 252 drmDynamicMajor: found major device number 252 drmOpenByBusid: Searching for BusID PCI:1:0:0 drmOpenDevice: node name is /dev/ati/card0 drmOpenDevice: open result is 13, (OK) drmOpenByBusid: drmOpenMinor returns 13 drmOpenByBusid: drmGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 331 x 207 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "de" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event8" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0 (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/hal: Adding input device Acer Crystal Eye webcam (**) Acer Crystal Eye webcam: always reports core events (**) Acer Crystal Eye webcam: Device: "/dev/input/event7" (II) Acer Crystal Eye webcam: Found keys (II) Acer Crystal Eye webcam: Configuring as keyboard (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "de" (II) config/hal: Adding input device Sleep Button (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event4" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "de" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event6" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "de" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event5" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "de" (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments (II) fglrx(0): EDID vendor "AUO", prod id 32884 (II) fglrx(0): Printing DDC gathered Modelines: (II) fglrx(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)