Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33.6-147.fc13.i686.PAE (mockbuild@x86-14.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Tue Jul 6 22:24:44 UTC 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) BIOS-e820: 000000003ff70000 - 000000003ff72000 (ACPI NVS) BIOS-e820: 000000003ff72000 - 000000003ff93000 (ACPI data) BIOS-e820: 000000003ff93000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Using x86 segment limits to approximate NX protection DMI 2.3 present. last_pfn = 0x3ff70 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DBFFF write-protect DC000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01000000 found SMP MP-table at [c00fe710] fe710 init_memory_mapping: 0000000000000000-00000000375fe000 0000000000 - 0000200000 page 4k 0000200000 - 0037400000 page 2M 0037400000 - 00375fe000 page 4k kernel direct mapping tables up to 375fe000 @ 7000-f000 RAMDISK: 37490000 - 37fefb9d Allocated new RAMDISK: 00b33000 - 01692b9d Move RAMDISK from 0000000037490000 - 0000000037fefb9c to 00b33000 - 01692b9c ACPI: RSDP 000feba0 00014 (v00 DELL ) ACPI: RSDT 000fd197 00038 (v01 DELL GX270 00000008 ASL 00000061) ACPI: FACP 000fd1cf 00074 (v01 DELL GX270 00000008 ASL 00000061) ACPI: DSDT fffd31a7 0277F (v01 DELL dt_ex 00001000 MSFT 0100000D) ACPI: FACS 3ff70000 00040 ACPI: SSDT fffd5a63 000BA (v01 DELL st_ex 00001000 MSFT 0100000D) ACPI: APIC 000fd243 0006C (v01 DELL GX270 00000008 ASL 00000061) ACPI: BOOT 000fd2af 00028 (v01 DELL GX270 00000008 ASL 00000061) ACPI: ASF! 000fd2d7 00067 (v16 DELL GX270 00000008 ASL 00000061) ACPI: Local APIC address 0xfee00000 137MB HIGHMEM available. 885MB LOWMEM available. mapped low ram: 0 - 375fe000 low ram: 0 - 375fe000 node 0 low ram: 00000000 - 375fe000 node 0 bootmap 0000b000 - 00011ec0 (14 early reservations) ==> bootmem [0000000000 - 00375fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000400000 - 0000b29834] TEXT DATA BSS ==> [0000400000 - 0000b29834] #3 [0000b2a000 - 0000b32190] BRK ==> [0000b2a000 - 0000b32190] #4 [00000fe720 - 0000100000] BIOS reserved ==> [00000fe720 - 0000100000] #5 [00000fe710 - 00000fe720] MP-table mpf ==> [00000fe710 - 00000fe720] #6 [000009fc00 - 00000f0000] BIOS reserved ==> [000009fc00 - 00000f0000] #7 [00000f01c0 - 00000fe710] BIOS reserved ==> [00000f01c0 - 00000fe710] #8 [00000f0000 - 00000f01c0] MP-table mpc ==> [00000f0000 - 00000f01c0] #9 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] #12 [0000b33000 - 0001692b9d] NEW RAMDISK ==> [0000b33000 - 0001692b9d] #13 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000375fe HighMem 0x000375fe -> 0x0003ff70 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x000000a0 0: 0x00000100 -> 0x0003ff70 On node 0 totalpages: 261904 free_area_init_node: node 0, pgdat c09b2c00, node_mem_map c1694000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3968 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 275 pages used for memmap HighMem zone: 34911 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 3 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 15 pages/cpu @c2000000 s38040 r0 d23400 u524288 pcpu-alloc: s38040 r0 d23400 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259857 Kernel command line: ro root=UUID=3c660274-cfd2-4a26-87e7-a7350f23e9e1 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 5240000 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000375fe:0003ff70) Memory: 1013628k/1048000k available (3614k kernel code, 33436k reserved, 2353k data, 484k init, 140744k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) .init : 0xc09d5000 - 0xc0a4e000 ( 484 kB) .data : 0xc0787bcc - 0xc09d4188 (2353 kB) .text : 0xc0400000 - 0xc0787bcc (3614 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour dummy device 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2394.291 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.58 BogoMIPS (lpj=2394291) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU0: Hyper-Threading is disabled mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) Performance Events: no PMU driver, software events only. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20091214 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Brought up 1 CPUs Total of 1 processors activated (4788.58 BogoMIPS). sizeof(vma)=88 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=508 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3252 bytes devtmpfs: initialized regulator: core version 0.5 Time: 13:54:10 Date: 07/20/10 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbab5, last bus=2 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) pci 0000:00:00.0: Enabling MCH 'Overflow' Device pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xc1ffffff pref] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f] pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f] pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.1: reg 24: [mem 0xfebffc00-0xfebfffff] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33] pci 0000:00:1f.2: reg 20: [io 0xfea0-0xfeaf] pci 0000:00:1f.3: reg 20: [io 0xeda0-0xedbf] pci 0000:00:1f.5: reg 10: [io 0xee00-0xeeff] pci 0000:00:1f.5: reg 14: [io 0xedc0-0xedff] pci 0000:00:1f.5: reg 18: [mem 0xfebffa00-0xfebffbff] pci 0000:00:1f.5: reg 1c: [mem 0xfebff900-0xfebff9ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] pci 0000:01:00.0: reg 14: [io 0xde00-0xdeff] pci 0000:01:00.0: reg 18: [mem 0xfe9e0000-0xfe9effff] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:00.1: reg 14: [mem 0xfe9f0000-0xfe9fffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xefffffff pref] pci 0000:02:09.0: reg 10: [mem 0xfe8df800-0xfe8dffff] pci 0000:02:09.0: supports D1 D2 pci 0000:02:0c.0: reg 10: [mem 0xfe8e0000-0xfe8fffff] pci 0000:02:0c.0: reg 18: [io 0xcf40-0xcf7f] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold pci 0000:02:0c.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] pci 0000:00:1e.0: bridge window [mem 0xfe800000-0xfe8fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0a: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] pnp 00:0a: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved system 00:00: [mem 0x01000000-0x3ff6ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved system 00:00: [mem 0xffc00000-0xffffffff] has been reserved system 00:0a: [io 0x0c00-0x0c7f] has been reserved pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] pci 0000:00:01.0: bridge window [mem 0xc2000000-0xefffffff pref] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] pci 0000:00:1e.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc2000000-0xefffffff pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:02: resource 3 [io 0x0000-0xffff] pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11646k freed Simple Boot Flag at 0x7a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1279634050.916:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1728 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [VBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 32M @ 0xc0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18 ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33.6-147.fc13.i686.PAE uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12 PNP: PS/2 controller doesn't have KBD irq; using default 1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16028 buckets, 64112 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:777:938 rtc_cmos 00:05: setting system clock to 2010-07-20 13:54:11 UTC (1279634051) Initalizing network drop monitor service ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F501, max UDMA/33 ata2.00: configured for UDMA/33 ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133 ata1.00: 80293248 sectors, multi 8: LBA ata1.01: HPA detected: current 39062500, native 39063024 ata1.01: ATA-5: WDC WD200BB-75DEA0, 05.03E05, max UDMA/100 ata1.01: 39062500 sectors, multi 8: LBA ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Direct-Access ATA WDC WD200BB-75DE 05.0 PQ: 0 ANSI: 5 sd 0:0:1:0: Attached scsi generic sg1 type 0 sd 0:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616E F501 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg2 type 5 sda1 sda2 psmouse serio1: ID: 10 00 64 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:1:0: [sdb] 39062500 512-byte logical blocks: (20.0 GB/18.6 GiB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 0:0:1:0: [sdb] Attached SCSI disk usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: New USB device found, idVendor=045e, idProduct=001c usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-2:1.0: USB hub found hub 3-2:1.0: 3 ports detected input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3 usb 3-2.1: new low speed USB device using uhci_hcd and address 3 usb 3-2.1: New USB device found, idVendor=045e, idProduct=001d usb 3-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-2.1: Product: Microsoft Natural Keyboard Pro input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.1/3-2.1:1.0/input/input4 generic-usb 0003:045E:001D.0001: input,hidraw0: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.1-2.1/input0 input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.1/3-2.1:1.1/input/input5 generic-usb 0003:045E:001D.0002: input,hidraw1: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:1d.1-2.1/input1 Freeing unused kernel memory: 484k freed Write protecting the kernel text: 3616k Write protecting the kernel read-only data: 1768k dracut: dracut-005-3.fc13 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation udev: starting version 151 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFE9E0000 [drm] register mmio size: 65536 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] Generation 2 PCI interface, using max accessible memory agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: putting AGP V3 device into 8x mode [drm] radeon: VRAM 256M [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF [drm] radeon: GTT 32M [drm] radeon: GTT from 0xC0000000 to 0xC1FFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 442782 kiB. [TTM] Zone highmem: Available graphics memory: 513154 kiB. [ttm] Initializing pool allocator. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 32M of GTT memory ready. [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [drm] radeon: cp idle (0x10000C03) [drm] Loading R300 Microcode platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [drm] radeon: ring at 0x00000000C0000000 [drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E4)=0xCAFEDEAD) [drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22). radeon 0000:01:00.0: failled initializing CP (-22). radeon 0000:01:00.0: Disabling GPU acceleration [drm:r100_cp_fini] *ERROR* Wait for CP idle timeout, shutting down CP. [drm] radeon: cp finalized [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] radeon: cp finalized [ttm] Finilizing pool allocator. [TTM] Zone kernel: Used memory at exit: 0 kiB. [TTM] Zone highmem: Used memory at exit: 0 kiB. [drm] radeon: ttm finalized [drm] Forcing AGP to PCI mode [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] Generation 2 PCI interface, using max accessible memory [drm] radeon: VRAM 256M [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF [drm] radeon: GTT 512M [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [drm] radeon: irq initialized. [drm] Detected VRAM RAM=256M, BAR=256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 442782 kiB. [TTM] Zone highmem: Available graphics memory: 513154 kiB. [ttm] Initializing pool allocator. kobject (f7ecac30): tried to init an initialized object, something is seriously wrong. Pid: 80, comm: modprobe Not tainted 2.6.33.6-147.fc13.i686.PAE #1 Call Trace: [] ? printk+0xf/0x11 [] kobject_init+0x2c/0x70 [] ttm_page_alloc_init+0x188/0x1d5 [ttm] [] ttm_mem_global_init+0x311/0x345 [ttm] [] radeon_ttm_mem_global_init+0xb/0xd [radeon] [] ttm_global_item_ref+0x3a/0x70 [ttm] [] radeon_ttm_init+0x47/0x2d8 [radeon] [] radeon_bo_init+0x82/0x87 [radeon] [] r300_init+0x171/0x231 [radeon] [] radeon_device_init+0x285/0x2be [radeon] [] radeon_driver_load_kms+0xd9/0x13b [radeon] [] drm_get_dev+0x2f7/0x3ce [drm] [] radeon_pci_probe+0xd/0xde [radeon] [] local_pci_probe+0xe/0x10 [] pci_device_probe+0x43/0x66 [] driver_probe_device+0xc5/0x1cd [] __driver_attach+0x43/0x5f [] bus_for_each_dev+0x3d/0x67 [] driver_attach+0x14/0x16 [] ? __driver_attach+0x0/0x5f [] bus_add_driver+0xf9/0x23f [] ? kset_find_obj+0x23/0x4f [] driver_register+0x7c/0xe3 [] __pci_register_driver+0x38/0x95 [] drm_init+0x5d/0xb5 [drm] [] ? radeon_init+0x0/0xae [radeon] [] radeon_init+0xac/0xae [radeon] [] do_one_initcall+0x4c/0x13a [] sys_init_module+0xa7/0x1dc [] syscall_call+0x7/0xb [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [drm] radeon: cp idle (0x10000000) [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Default TV standard: PAL [drm] 27.000000000 MHz TV ref clk [drm] DFP table revision: 3 [drm] Default TV standard: PAL [drm] 27.000000000 MHz TV ref clk [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] fb mappable at 0xE0040000 [drm] vram apper at 0xE0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 240x67 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation EXT4-fs (sda1): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/sda1 dracut: Loading SELinux policy type=1404 audit(1279634055.889:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 2048 avtab hash slots, 196917 rules. SELinux: 2048 avtab hash slots, 196917 rules. SELinux: 9 users, 13 roles, 3276 types, 160 bools, 1 sens, 1024 cats SELinux: 77 classes, 196917 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1279634056.775:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root readahead: starting udev: starting version 151 intel_rng: FWH not detected microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e microcode: Microcode Update Driver: v2.00 , Peter Oruba iTCO_vendor_support: vendor-support=0 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) e1000: 0000:02:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:0b:db:85:46:67 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] type=1400 audit(1279634061.923:4): avc: denied { mmap_zero } for pid=454 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect ppdev: user-space parallel port driver Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.15 loaded saa7134 0000:02:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 18, latency: 64, mmio: 0xfe8df800 saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7135 [card=53,autodetected] saa7133[0]: board init: gpio is 0 IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 88 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: P7131 analog only, using entry of ASUSTeK P7131 Analog Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 tuner 3-004b: chip found @ 0x96 (saa7133[0]) tda829x 3-004b: setting tuner address to 61 tda829x 3-004b: type set to tda8290+75a intel8x0_measure_ac97_clock: measured 50870 usecs (2452 samples) intel8x0: clocking to 48000 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 saa7134 ALSA driver for DMA sound loaded IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs saa7133[0]/alsa: saa7133[0] at 0xfe8df800 irq 18 registered as card -1 EXT4-fs (sdb1): mounted filesystem with ordered data mode SELinux: initialized (dev sdb1, type ext4), uses xattr Adding 1023992k swap on /dev/sda2. Priority:-1 extents:1 across:1023992k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts eth0: no IPv6 routers present PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 0:0:1:0: [sdb] Synchronizing SCSI cache sd 0:0:1:0: [sdb] Stopping disk sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:09: disabled serial 00:08: disabled e1000 0000:02:0c.0: PCI INT A disabled e1000 0000:02:0c.0: PME# enabled pci 0000:00:1e.0: wake-up capability enabled by ACPI ACPI handle has no context! radeon 0000:01:00.0: PCI INT A disabled Intel ICH 0000:00:1f.5: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT A disabled ata_piix 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT D disabled uhci_hcd 0000:00:1d.3: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled PM: suspend of devices complete after 3986.385 msecs PM: late suspend of devices complete after 11.490 msecs ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Back to C! ACPI: Waking up from system sleep state S3 agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900006, writing 0x20900106) pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a0d0d0, writing 0x22a0d0d0) pci 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x14000) pci 0000:00:06.0: restoring config space at offset 0xf (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0xe (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0xd (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0xc (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0xb (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0x9 (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0x8 (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0x7 (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0x6 (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0x5 (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0x4 (was 0xffffffff, writing 0xfecf0000) pci 0000:00:06.0: restoring config space at offset 0x3 (was 0xffffffff, writing 0x0) pci 0000:00:06.0: restoring config space at offset 0x2 (was 0xffffffff, writing 0x8800002) pci 0000:00:06.0: restoring config space at offset 0x1 (was 0xffffffff, writing 0x800002) pci 0000:00:06.0: restoring config space at offset 0x0 (was 0xffffffff, writing 0x25768086) uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x100, writing 0x10b) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x405) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xffa80800) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0x20000) pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xfe80fe80) pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x228000f0, writing 0x280c0c0) pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20200, writing 0x20020200) pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x800005, writing 0x800107) pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x280000f, writing 0x280010f) ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x109) ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0xfebffc00) ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x100, writing 0x109) i801_smbus 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x203) i801_smbus 0000:00:1f.3: restoring config space at offset 0x8 (was 0x8c1, writing 0xeda1) Intel ICH 0000:00:1f.5: restoring config space at offset 0xf (was 0x200, writing 0x203) Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xfebff900) Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xfebffa00) Intel ICH 0000:00:1f.5: restoring config space at offset 0x5 (was 0x1, writing 0xedc1) Intel ICH 0000:00:1f.5: restoring config space at offset 0x4 (was 0x1, writing 0xee01) Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900003) radeon 0000:01:00.0: restoring config space at offset 0xf (was 0x801ff, writing 0x8010b) radeon 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfea00000) radeon 0000:01:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xfe9e0000) radeon 0000:01:00.0: restoring config space at offset 0x5 (was 0x1, writing 0xde01) radeon 0000:01:00.0: restoring config space at offset 0x4 (was 0x8, writing 0xe0000008) radeon 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00107) pci 0000:01:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xfe9f0000) pci 0000:01:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xd0000008) pci 0000:01:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x4010) pci 0000:01:00.1: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007) saa7134 0000:02:09.0: restoring config space at offset 0xf (was 0x20540100, writing 0x20540109) saa7134 0000:02:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe8df800) saa7134 0000:02:09.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) saa7134 0000:02:09.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900106) e1000 0000:02:0c.0: restoring config space at offset 0xf (was 0xff0100, writing 0xff0109) e1000 0000:02:0c.0: restoring config space at offset 0x6 (was 0x1, writing 0xcf41) e1000 0000:02:0c.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe8e0000) e1000 0000:02:0c.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) e1000 0000:02:0c.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300117) PM: early resume of devices complete after 0.746 msecs uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.2: setting latency timer to 64 Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [drm] radeon: cp idle (0x10000C03) [drm] radeon: ring at 0x0000000020000000 [drm] ring test succeeded in 1 usecs [drm] ib test succeeded in 0 usecs saa7133[0]: board init: gpio is 0 ata2.00: configured for UDMA/33 e1000 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1e.0: wake-up capability disabled by ACPI e1000 0000:02:0c.0: PME# disabled serial 00:08: activated parport_pc 00:09: activated sd 0:0:0:0: [sda] Starting disk psmouse serio1: ID: 10 00 64 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 sd 0:0:1:0: [sdb] Starting disk usb 3-2: reset full speed USB device using uhci_hcd and address 2 usb 3-2.1: reset low speed USB device using uhci_hcd and address 3 PM: resume of devices complete after 5510.215 msecs PM: Finishing wakeup. Restarting tasks ... done. ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present