[root@wishmacer andrzejl]# lspci -vvv 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Acer Incorporated [ALI] Device 006a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 006a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: Acer Incorporated [ALI] Device 006a Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Screen "Default Screen Section" (0) [ 17.911] (**) | |-->Monitor "" [ 17.930] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 17.930] (==) Automatically adding devices [ 17.930] (==) Automatically enabling devices [ 17.930] (==) Automatically adding GPU devices [ 18.081] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 18.081] Entry deleted from font path. [ 18.133] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 18.133] Entry deleted from font path. [ 18.133] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 18.133] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 18.133] Entry deleted from font path. [ 18.133] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 18.133] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/ [ 18.133] (==) ModulePath set to "/usr/lib/xorg/modules" [ 18.133] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.144] (II) Loader magic: 0x825a640 [ 18.144] (II) Module ABI versions: [ 18.144] X.Org ANSI C Emulation: 0.4 [ 18.144] X.Org Video Driver: 13.1 [ 18.144] X.Org XInput driver : 18.0 [ 18.144] X.Org Server Extension : 7.0 [ 18.145] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.148] (--) PCI:*(0:0:2:0) 8086:2592:1025:006a rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8 [ 18.148] (--) PCI: (0:0:2:1) 8086:2792:1025:006a rev 3, Mem @ 0x84000000/524288 [ 18.148] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 18.161] Initializing built-in extension Generic Event Extension [ 18.161] Initializing built-in extension SHAPE [ 18.161] Initializing built-in extension MIT-SHM [ 18.161] Initializing built-in extension XInputExtension [ 18.161] Initializing built-in extension XTEST [ 18.161] Initializing built-in extension BIG-REQUESTS [ 18.161] Initializing built-in extension SYNC [ 18.161] Initializing built-in extension XKEYBOARD [ 18.161] Initializing built-in extension XC-MISC [ 18.161] Initializing built-in extension SECURITY [ 18.161] Initializing built-in extension XINERAMA [ 18.161] Initializing built-in extension XFIXES [ 18.161] Initializing built-in extension RENDER [ 18.161] Initializing built-in extension RANDR [ 18.161] Initializing built-in extension COMPOSITE [ 18.161] Initializing built-in extension DAMAGE [ 18.161] Initializing built-in extension MIT-SCREEN-SAVER [ 18.161] Initializing built-in extension DOUBLE-BUFFER [ 18.161] Initializing built-in extension RECORD [ 18.161] Initializing built-in extension DPMS [ 18.161] Initializing built-in extension X-Resource [ 18.161] Initializing built-in extension XVideo [ 18.161] Initializing built-in extension XVideo-MotionCompensation [ 18.161] Initializing built-in extension XFree86-VidModeExtension [ 18.161] Initializing built-in extension XFree86-DGA [ 18.161] Initializing built-in extension XFree86-DRI [ 18.161] Initializing built-in extension DRI2 [ 18.161] (II) LoadModule: "glx" [ 18.191] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 18.262] (II) Module glx: vendor="X.Org Foundation" [ 18.262] compiled for 1.13.1, module version = 1.0.0 [ 18.262] ABI class: X.Org Server Extension, version 7.0 [ 18.262] (==) AIGLX enabled [ 18.262] Loading extension GLX [ 18.262] (==) Matched intel as autoconfigured driver 0 [ 18.262] (==) Matched intel as autoconfigured driver 1 [ 18.262] (==) Matched vesa as autoconfigured driver 2 [ 18.262] (==) Matched modesetting as autoconfigured driver 3 [ 18.262] (==) Matched fbdev as autoconfigured driver 4 [ 18.262] (==) Assigned the driver to the xf86ConfigLayout [ 18.262] (II) LoadModule: "intel" [ 18.282] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.373] (II) Module intel: vendor="X.Org Foundation" [ 18.373] compiled for 1.13.0.902, module version = 2.20.16 [ 18.373] Module class: X.Org Video Driver [ 18.373] ABI class: X.Org Video Driver, version 13.1 [ 18.373] (II) LoadModule: "vesa" [ 18.380] (WW) Warning, couldn't open module vesa [ 18.380] (II) UnloadModule: "vesa" [ 18.380] (II) Unloading vesa [ 18.380] (EE) Failed to load module "vesa" (module does not exist, 0) [ 18.380] (II) LoadModule: "modesetting" [ 18.381] (WW) Warning, couldn't open module modesetting [ 18.381] (II) UnloadModule: "modesetting" [ 18.381] (II) Unloading modesetting [ 18.381] (EE) Failed to load module "modesetting" (module does not exist, 0) [ 18.381] (II) LoadModule: "fbdev" [ 18.381] (WW) Warning, couldn't open module fbdev [ 18.381] (II) UnloadModule: "fbdev" [ 18.381] (II) Unloading fbdev [ 18.381] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 18.381] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.382] (++) using VT number 7 [ 18.394] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 18.394] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.394] (==) intel(0): RGB weight 888 [ 18.394] (==) intel(0): Default visual is TrueColor [ 18.394] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915GM [ 18.394] (**) intel(0): Relaxed fencing disabled [ 18.394] (**) intel(0): Wait on SwapBuffers? enabled [ 18.394] (**) intel(0): Triple buffering? enabled [ 18.394] (**) intel(0): Framebuffer tiled [ 18.394] (**) intel(0): Pixmaps tiled [ 18.394] (**) intel(0): 3D buffers tiled [ 18.407] (**) intel(0): SwapBuffers wait enabled [ 18.407] (==) intel(0): video overlay key set to 0x101fe [ 18.408] (II) intel(0): Output LVDS1 has no monitor section [ 18.608] (II) intel(0): Output VGA1 has no monitor section [ 18.977] (II) intel(0): Output TV1 has no monitor section [ 19.056] (II) intel(0): EDID for output LVDS1 [ 19.056] (II) intel(0): Manufacturer: LPL Model: 1246 Serial#: 0 [ 19.056] (II) intel(0): Year: 2005 Week: 0 [ 19.056] (II) intel(0): EDID Version: 1.3 [ 19.056] (II) intel(0): Digital Display Input [ 19.056] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19 [ 19.056] (II) intel(0): Gamma: 2.20 [ 19.056] (II) intel(0): No DPMS capabilities specified [ 19.056] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 19.056] (II) intel(0): First detailed timing is preferred mode [ 19.056] (II) intel(0): redX: 0.581 redY: 0.344 greenX: 0.325 greenY: 0.547 [ 19.056] (II) intel(0): blueX: 0.157 blueY: 0.137 whiteX: 0.312 whiteY: 0.328 [ 19.056] (II) intel(0): Manufacturer's mask: 0 [ 19.056] (II) intel(0): Supported detailed timing: [ 19.057] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm [ 19.057] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0 [ 19.057] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0 [ 19.057] (II) intel(0): LGPhilipsLCD [ 19.057] (II) intel(0): LP141WX1-TL03 [ 19.057] (II) intel(0): EDID (in hex): [ 19.057] (II) intel(0): 00ffffffffffff00320c461200000000 [ 19.057] (II) intel(0): 000f0103801e13780ac4409458538c28 [ 19.057] (II) intel(0): 23505400000001010101010101010101 [ 19.057] (II) intel(0): 010101010101ea1a0080502010301520 [ 19.057] (II) intel(0): 44004bcf100000180000000000000000 [ 19.057] (II) intel(0): 00000000000000000000000000fe004c [ 19.057] (II) intel(0): 475068696c6970734c43440a000000fe [ 19.057] (II) intel(0): 004c503134315758312d544c303300e6 [ 19.057] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 19.057] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 19.057] (II) intel(0): Printing probed modes for output LVDS1 [ 19.057] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP) [ 19.057] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 19.057] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 19.057] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 19.057] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 19.251] (II) intel(0): EDID for output VGA1 [ 19.637] (II) intel(0): EDID for output TV1 [ 19.637] (II) intel(0): Output LVDS1 connected [ 19.637] (II) intel(0): Output VGA1 disconnected [ 19.637] (II) intel(0): Output TV1 disconnected [ 19.637] (II) intel(0): Using exact sizes for initial modes [ 19.637] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 19.637] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 19.637] (II) intel(0): Kernel page flipping support detected, enabling [ 19.637] (==) intel(0): DPI set to (96, 96) [ 19.637] (II) Loading sub module "fb" [ 19.637] (II) LoadModule: "fb" [ 19.637] (II) Loading /usr/lib/xorg/modules/libfb.so [ 19.770] (II) Module fb: vendor="X.Org Foundation" [ 19.770] compiled for 1.13.1, module version = 1.0.0 [ 19.770] ABI class: X.Org ANSI C Emulation, version 0.4 [ 19.770] (II) Loading sub module "dri2" [ 19.770] (II) LoadModule: "dri2" [ 19.770] (II) Module "dri2" already built-in [ 19.771] (==) Depth 24 pixmap format is 32 bpp [ 19.791] (II) intel(0): [DRI2] Setup complete [ 19.791] (II) intel(0): [DRI2] DRI driver: i915 [ 19.792] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [ 19.830] (II) UXA(0): Driver registered support for the following operations: [ 19.830] (II) solid [ 19.830] (II) copy [ 19.830] (II) composite (RENDER acceleration) [ 19.830] (II) put_image [ 19.830] (II) get_image [ 19.830] (==) intel(0): Backing store disabled [ 19.830] (==) intel(0): Silken mouse enabled [ 19.830] (II) intel(0): Initializing HW Cursor [ 19.830] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 19.832] (==) intel(0): DPMS enabled [ 19.832] (==) intel(0): Intel XvMC decoder disabled [ 19.832] (II) intel(0): Set up textured video [ 19.832] (II) intel(0): Set up overlay video [ 19.832] (II) intel(0): direct rendering: DRI2 Enabled [ 19.832] (==) intel(0): hotplug detection: "enabled" [ 19.861] (--) RandR disabled [ 20.525] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 20.525] (II) AIGLX: enabled GLX_INTEL_swap_event [ 20.525] (II) AIGLX: enabled GLX_ARB_create_context [ 20.525] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 20.525] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 20.525] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 20.525] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 20.526] (II) AIGLX: Loaded and initialized i915 [ 20.526] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.527] (II) intel(0): Setting screen physical size to 338 x 211 [ 21.422] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 21.422] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 21.422] (II) LoadModule: "evdev" [ 21.422] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.530] (II) Module evdev: vendor="X.Org Foundation" [ 21.530] compiled for 1.13.0, module version = 2.7.3 [ 21.530] Module class: X.Org XInput Driver [ 21.530] ABI class: X.Org XInput driver, version 18.0 [ 21.530] (II) Using input driver 'evdev' for 'Power Button' [ 21.530] (**) Power Button: always reports core events [ 21.530] (**) evdev: Power Button: Device: "/dev/input/event3" [ 21.530] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 21.530] (--) evdev: Power Button: Found keys [ 21.530] (II) evdev: Power Button: Configuring as keyboard [ 21.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 21.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 21.530] (**) Option "xkb_rules" "evdev" [ 21.530] (**) Option "xkb_model" "evdev" [ 21.530] (**) Option "xkb_layout" "us" [ 21.621] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 21.621] (II) No input driver specified, ignoring this device. [ 21.621] (II) This device may have been added with another device file. [ 21.621] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 21.621] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 21.621] (II) Using input driver 'evdev' for 'Sleep Button' [ 21.621] (**) Sleep Button: always reports core events [ 21.621] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 21.622] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 21.622] (--) evdev: Sleep Button: Found keys [ 21.622] (II) evdev: Sleep Button: Configuring as keyboard [ 21.622] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2" [ 21.622] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 21.622] (**) Option "xkb_rules" "evdev" [ 21.622] (**) Option "xkb_model" "evdev" [ 21.622] (**) Option "xkb_layout" "us" [ 21.622] (II) config/udev: Adding drm device (/dev/dri/card0) [ 21.627] (II) config/udev: Adding input device SilverCrest OML807 (/dev/input/event5) [ 21.627] (**) SilverCrest OML807: Applying InputClass "evdev pointer catchall" [ 21.627] (**) SilverCrest OML807: Applying InputClass "evdev keyboard catchall" [ 21.627] (II) Using input driver 'evdev' for 'SilverCrest OML807' [ 21.627] (**) SilverCrest OML807: always reports core events [ 21.627] (**) evdev: SilverCrest OML807: Device: "/dev/input/event5" [ 21.627] (--) evdev: SilverCrest OML807: Vendor 0x1bcf Product 0x53a [ 21.627] (--) evdev: SilverCrest OML807: Found 12 mouse buttons [ 21.627] (--) evdev: SilverCrest OML807: Found scroll wheel(s) [ 21.627] (--) evdev: SilverCrest OML807: Found relative axes [ 21.627] (--) evdev: SilverCrest OML807: Found x and y relative axes [ 21.627] (--) evdev: SilverCrest OML807: Found absolute axes [ 21.627] (II) evdev: SilverCrest OML807: Forcing absolute x/y axes to exist. [ 21.627] (--) evdev: SilverCrest OML807: Found keys [ 21.627] (II) evdev: SilverCrest OML807: Configuring as mouse [ 21.627] (II) evdev: SilverCrest OML807: Configuring as keyboard [ 21.627] (II) evdev: SilverCrest OML807: Adding scrollwheel support [ 21.627] (**) evdev: SilverCrest OML807: YAxisMapping: buttons 4 and 5 [ 21.627] (**) evdev: SilverCrest OML807: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 21.627] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.1/input/input5/event5" [ 21.627] (II) XINPUT: Adding extended input device "SilverCrest OML807" (type: KEYBOARD, id 8) [ 21.627] (**) Option "xkb_rules" "evdev" [ 21.627] (**) Option "xkb_model" "evdev" [ 21.627] (**) Option "xkb_layout" "us" [ 21.628] (II) evdev: SilverCrest OML807: initialized for relative axes. [ 21.628] (WW) evdev: SilverCrest OML807: ignoring absolute axes. [ 21.628] (**) SilverCrest OML807: (accel) keeping acceleration scheme 1 [ 21.628] (**) SilverCrest OML807: (accel) acceleration profile 0 [ 21.628] (**) SilverCrest OML807: (accel) acceleration factor: 2.000 [ 21.628] (**) SilverCrest OML807: (accel) acceleration threshold: 4 [ 21.629] (II) config/udev: Adding input device SilverCrest OML807 (/dev/input/mouse0) [ 21.629] (II) No input driver specified, ignoring this device. [ 21.629] (II) This device may have been added with another device file. [ 21.629] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 21.629] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 21.629] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 21.629] (**) AT Translated Set 2 keyboard: always reports core events [ 21.629] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 21.629] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 21.629] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 21.629] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 21.629] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 21.629] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 21.629] (**) Option "xkb_rules" "evdev" [ 21.629] (**) Option "xkb_model" "evdev" [ 21.629] (**) Option "xkb_layout" "us" [ 21.631] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) [ 21.631] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 21.631] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 21.631] (II) LoadModule: "synaptics" [ 21.631] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 21.643] (II) Module synaptics: vendor="X.Org Foundation" [ 21.643] compiled for 1.13.0, module version = 1.6.2 [ 21.643] Module class: X.Org XInput Driver [ 21.643] ABI class: X.Org XInput driver, version 18.0 [ 21.643] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 21.643] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 21.643] (**) Option "Device" "/dev/input/event6" [ 21.680] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 21.680] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 21.680] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 21.680] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 21.680] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons [ 21.680] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 21.680] (**) Option "TapButton1" "1" [ 21.680] (**) Option "TapButton2" "2" [ 21.680] (**) Option "TapButton3" "3" [ 21.680] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 21.680] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 21.700] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event6" [ 21.700] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10) [ 21.700] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 21.700] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 21.700] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 21.700] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 21.700] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 21.700] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 21.700] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 21.700] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 21.701] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 21.701] (II) No input driver specified, ignoring this device. [ 21.701] (II) This device may have been added with another device file. [ 21.702] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event4) [ 21.702] (II) No input driver specified, ignoring this device. [ 21.702] (II) This device may have been added with another device file. [ 21.702] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0) [ 21.702] (II) No input driver specified, ignoring this device. [ 21.702] (II) This device may have been added with another device file. [ 64.766] (II) intel(0): EDID vendor "LPL", prod id 4678 [ 64.773] (II) intel(0): Printing DDC gathered Modelines: [ 64.773] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP) [ 99.080] (II) intel(0): EDID vendor "LPL", prod id 4678 [ 99.080] (II) intel(0): Printing DDC gathered Modelines: [ 99.080] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP) [ 100.646] (II) intel(0): EDID vendor "LPL", prod id 4678 [ 100.646] (II) intel(0): Printing DDC gathered Modelines: [ 100.646] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP) [root@wishmacer andrzejl]# inxi -v7 System: Host: wishmacer.loc Kernel: 3.7.0-1-ARCH i686 (32 bit, gcc: 4.7.2) Desktop: KDE 4.9.4 (Qt 4.8.4) info: plasma-desktop dm: kdm Distro: Arch Linux Machine: System: Acer product: TravelMate 2420 version: 0100 serial: LXTB20504360808B79KS00 Chassis: type: 10 Mobo: Acer model: Garda-910 version: Rev serial: LXTB20504360808B79KS00 Bios: Phoenix version: V1.01 date: 12/15/2005 CPU: Single core Intel Celeron M (-UP-) cache: 1024 KB flags: (nx sse sse2) bmips: 2993.22 clocked at 1496.268 MHz Graphics: Card: Intel Mobile 915GM/GMS/910GML Express Graphics Controller bus-ID: 00:02.0 chip-ID: 8086:2592 X.org: 1.13.1 driver: intel tty size: 137x30 Advanced Data: N/A for root Audio: Card: Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller driver: snd_intel8x0 ports: 1c00 18c0 bus-ID: 00:1e.2 chip-ID: 8086:266e Sound: Advanced Linux Sound Architecture ver: k3.7.0-1-ARCH Network: Card-1: Realtek RTL-8139/8139C/8139C+ driver: 8139too ver: 0.9.28 port: 3000 bus-ID: 06:07.0 chip-ID: 10ec:8139 IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:0a:e4:f6:d4:8f Card-2: Atheros AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] driver: ath9k bus-ID: 06:05.0 chip-ID: 168c:0023 IF: wlan0 state: down mac: 00:1e:52:7a:46:5d WAN IP: 178.167.165.178 IF: eth0 ip: 192.168.0.100 ip-v6: N/A Drives: HDD Total Size: 490.0GB (44.7% used) 1: id: /dev/sda model: SAMSUNG_HM160HC size: 160.0GB serial: S12TJDQB229753 temp: 35C 2: USB id: /dev/sdb model: ST950212A size: 50.0GB serial: 0000000000000000W-0:0 temp: 0C 3: USB id: /dev/sdc model: WD600UE size: 60.0GB serial: 0000000000000000W-0:0 temp: 0C 4: USB id: /dev/sdd model: Voyager_GT_3.0 size: 16.0GB serial: 22110211570000030030-0:0 temp: 0C 5: USB id: /dev/sde model: 6Y200P0 size: 203.9GB serial: 0000000000000000W-0:0 temp: 0C Optical: /dev/sr0 model: N/A rev: N/A dev-links: cdrom,cdrw,dvd,dvdrw Features: speed: 24x multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: N/A Partition: ID: / size: 25G used: 8.4G (36%) fs: ext4 dev: /dev/sda1 label: N/A uuid: 1d57d4c0-ecdc-4f85-b997-bbaac4313b16 ID: /media/189_GB_X-Ternal size: 187G used: 99G (56%) fs: ext4 dev: /dev/sde1 label: 189_GB_X-Ternal uuid: 91dfb8e5-c6e9-480e-9e54-1ec3ed95265d ID: /media/WindowsXP size: 10G used: 9.7G (97%) fs: fuseblk dev: /dev/sda3 label: N/A uuid: 3E585764585719CB ID: /media/55_GB_X-Ternal size: 56G used: 20G (38%) fs: ext4 dev: /dev/sdc1 label: 55_GB_X-Ternal uuid: 1b8dc88e-03e9-4d45-b2c3-33f9ed8eac2e ID: /media/Disk_2 size: 34G used: 30G (92%) fs: ext4 dev: /dev/sda8 label: Data_Disk_2 uuid: 9a4e9fc2-e67f-4d7b-806b-df7f4c6fe3c3 ID: /home size: 9.9G used: 5.5G (58%) fs: ext4 dev: /dev/sda6 label: N/A uuid: b0cd3c12-a326-45b6-9a18-96c5af876a7e ID: /media/Disk_3 size: 25G used: 172M (1%) fs: ext4 dev: /dev/sda9 label: N/A uuid: e27d88a0-bff9-4fad-abf6-ffa9ed5d88a1 ID: /media/Disk_1 size: 34G used: 32G (100%) fs: ext4 dev: /dev/sda7 label: Data_Disk_1 uuid: f5c313e3-22b8-484e-8ae8-8e0f79f1026c ID: /media/PCLinuxOS_Home size: 9.0G used: 1.6G (19%) fs: ext4 dev: /dev/sda10 label: N/A uuid: 320cf41c-dc8c-41a0-bc10-e5fbfca3624f ID: /media/15_GB_X-Ternal size: 15G used: 187M (2%) fs: ext4 dev: /dev/sdd1 label: 15_GB_X-Ternal uuid: 71a3c2f9-cb32-4396-8e4c-a680bce4a256 ID: /media/46_GB_X-Ternal size: 47G used: 227M (1%) fs: fuseblk dev: /dev/sdb1 label: 46_GB_X-Ternal uuid: 14C0D1DFC0D1C6E0 ID: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 label: N/A uuid: f84bd38a-3ab1-48c7-bc87-8251c8603d85 RAID: No RAID data available - /proc/mdstat is missing - is md_mod kernel module loaded? Unmounted: ID: /dev/sr0 size: 1.07G label: N/A uuid: N/A Sensors: System Temperatures: cpu: 48.0C mobo: 30.0C Fan Speeds (in rpm): cpu: N/A Info: Processes: 136 Uptime: 10 min Memory: 478.8/2011.2MB Runlevel: 5 Gcc sys: 4.7.2 Client: Shell (bash 4.2.39) inxi: 1.8.24 [root@wishmacer andrzejl]# [andrzejl@wishmacer ~]$ glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. 297 frames in 5.0 seconds = 59.290 FPS 293 frames in 5.0 seconds = 58.458 FPS 293 frames in 5.0 seconds = 58.455 FPS 288 frames in 5.0 seconds = 57.448 FPS 299 frames in 5.0 seconds = 59.640 FPS 292 frames in 5.0 seconds = 58.252 FPS 275 frames in 5.0 seconds = 54.856 FPS 281 frames in 5.0 seconds = 56.131 FPS ^C [andrzejl@wishmacer ~]$ vblank_mode=0 glxgears ATTENTION: default value of option vblank_mode overridden by environment. ATTENTION: default value of option vblank_mode overridden by environment. 1839 frames in 5.0 seconds = 367.360 FPS 2080 frames in 5.0 seconds = 415.923 FPS 2076 frames in 5.0 seconds = 415.101 FPS 2076 frames in 5.0 seconds = 414.897 FPS 2052 frames in 5.0 seconds = 410.394 FPS XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0" after 10593 requests (10593 known processed) with 0 events remaining. [andrzejl@wishmacer ~]$ [andrzejl@wishmacer ~]$ cat /home/andrzejl/.drirc [andrzejl@wishmacer ~]$