Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v3.8.2-RELEASE #7: Thu Aug 14 21:26:32 PDT 2014
    root@pkgbox32.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/GENERIC
TSC clock: 2009116673 Hz, i8254 clock: 1193185 Hz
CPU: AMD Sempron(tm) Processor 3600+ (2009.13-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x50ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x19<LAHF,ExtAPIC,CR8>
real memory  = 938014720 (894 MB)
avail memory = 887226368 (846 MB)
LAPIC: AMD LINTEN on
lapic: divisor index 0, frequency 100455933 Hz
SMI Frequency (worst case): 491 Hz (2034 us)
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x000F74D0 000024 (v02 HPQOEM)
ACPI: XSDT 0x37EF3100 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: FACP 0x37EF9300 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20140424/tbfadt-730)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20140424/tbfadt-730)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20140424/tbfadt-730)
ACPI: DSDT 0x37EF32C0 005FFC (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
ACPI: FACS 0x37EF0000 000040
ACPI: SLIC 0x37EF9500 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: SSDT 0x37EF96C0 0000F4 (v01 HPQOEM SLIC-CPC 00000001  LTP 00000001)
ACPI: HPET 0x37EF9800 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
ACPI: MCFG 0x37EF9880 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: APIC 0x37EF9440 00007C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <HPQOEM SLIC-CPC> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
acpi_hpet0: frequency 25000000
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> (vendor 0x10de, dev 0x03ea) at device 0.0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> (vendor 0x10de, dev 0x03eb) at device 1.1 irq 22
pci0: <memory, RAM> (vendor 0x10de, dev 0x03f5) at device 1.2
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff irq 23 at device 2.0 on pci0
usbus0: <nVidia nForce MCP61 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1: <NVIDIA nForce MCP61 USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8110/8169 Gigabit Ethernet> port 0xcc00-0xccff mem 0xfd9ff000-0xfd9ff0ff irq 18 at device 10.0 on pci1
re0: Hardware rev. 0x04000000; PCI32 33MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
usbus1: 480Mbps High Speed USB v2.0
re0: MAC address: 00:1e:2a:39:83:14
pci0: <multimedia, HDA> (vendor 0x10de, dev 0x03f0) at device 5.0 irq 23
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xdc00-0xdc0f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 mem 0xfe02d000-0xfe02dfff irq 20 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
disk scheduler: set policy of ad4 to noop
ad4: 476940MB <Hitachi HDS721050CLA362 JP2OA50E> at ata2-master SATA300
ata3: <ATA channel 1> on atapci1
disk scheduler: set policy of acd0 to noop
acd0: DVDR <HL-DT-ST DVD-RW GSA-H60L/DC07> at ata3-master SATA150
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 22 at device 13.0 on pci0
acpi_tz0: <Thermal Zone> on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd7fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
hpt27xx: no controller detected.
CAM: Configuring 4 busses
uhub0: 8 ports with 8 removable, self powered
CAM: finished configuring all busses
disk scheduler: set policy of cd0 to noop
cd0 at ata3 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GSA-H60L DC07> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub1: 8 ports with 8 removable, self powered
Mounting root from hammer:serno/JP1572JE0NYJ8K.s1d
HAMMER(ROOT) recovery check seqno=00127e17
HAMMER(ROOT) recovery range 3000000004e79168-3000000004e79168
HAMMER(ROOT) recovery nexto 3000000004e79168 endseqno=00127e18
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 292k, remaining available: 16384k
Mounting devfs
ugen0.2: <Logitech> at usbus0
ukbd0: <USB Keyboard> on usbus0
kbd2 at ukbd0
uhid0: <USB Keyboard> on usbus0
ugen0.2: <Logitech> at usbus0 (disconnected)
ukbd0: at uhub0, port 6, addr 2 (disconnected)
ukbd0: detached
uhid0: at uhub0, port 6, addr 2 (disconnected)
uhid0: detached
ugen0.2: <Logitech> at usbus0
ukbd0: <USB Keyboard> on usbus0
kbd2 at ukbd0
uhid0: <USB Keyboard> on usbus0
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped

syncing disks... 
done
vflush: Warning, cannot destroy busy device vnode
unmount of filesystem mounted from devfs failed (BUSY)
unmount(0xac215480): Forced unmount: 0 namecache references still present
unmount(0xac215480): Forced unmount: 2 mount refs still present
Uptime: 1h4m57s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <Logitech> at usbus0 (disconnected)
ukbd0: at uhub0, port 6, addr 2 (disconnected)
ukbd0: detached
uhid0: at uhub0, port 6, addr 2 (disconnected)
Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v3.8.2-RELEASE #7: Thu Aug 14 21:26:32 PDT 2014
    root@pkgbox32.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/GENERIC
TSC clock: 2009126803 Hz, i8254 clock: 1193191 Hz
CPU: AMD Sempron(tm) Processor 3600+ (2009.12-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x50ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x19<LAHF,ExtAPIC,CR8>
real memory  = 938014720 (894 MB)
avail memory = 887226368 (846 MB)
LAPIC: AMD LINTEN on
lapic: divisor index 0, frequency 100455982 Hz
SMI Frequency (worst case): 806 Hz (1240 us)
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x000F74D0 000024 (v02 HPQOEM)
ACPI: XSDT 0x37EF3100 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: FACP 0x37EF9300 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20140424/tbfadt-648)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20140424/tbfadt-730)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20140424/tbfadt-730)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20140424/tbfadt-730)
ACPI: DSDT 0x37EF32C0 005FFC (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
ACPI: FACS 0x37EF0000 000040
ACPI: SLIC 0x37EF9500 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: SSDT 0x37EF96C0 0000F4 (v01 HPQOEM SLIC-CPC 00000001  LTP 00000001)
ACPI: HPET 0x37EF9800 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
ACPI: MCFG 0x37EF9880 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
ACPI: APIC 0x37EF9440 00007C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <HPQOEM SLIC-CPC> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
acpi_hpet0: frequency 25000000
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> (vendor 0x10de, dev 0x03ea) at device 0.0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> (vendor 0x10de, dev 0x03eb) at device 1.1 irq 22
pci0: <memory, RAM> (vendor 0x10de, dev 0x03f5) at device 1.2
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff irq 23 at device 2.0 on pci0
usbus0: <nVidia nForce MCP61 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1: <NVIDIA nForce MCP61 USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8110/8169 Gigabit Ethernet> port 0xcc00-0xccff mem 0xfd9ff000-0xfd9ff0ff irq 18 at device 10.0 on pci1
re0: Hardware rev. 0x04000000; PCI32 33MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
usbus1: 480Mbps High Speed USB v2.0
re0: MAC address: 00:1e:2a:39:83:14
pci0: <multimedia, HDA> (vendor 0x10de, dev 0x03f0) at device 5.0 irq 23
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xdc00-0xdc0f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 mem 0xfe02d000-0xfe02dfff irq 20 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
disk scheduler: set policy of ad4 to noop
ad4: 476940MB <Hitachi HDS721050CLA362 JP2OA50E> at ata2-master SATA300
ata3: <ATA channel 1> on atapci1
disk scheduler: set policy of acd0 to noop
acd0: DVDR <HL-DT-ST DVD-RW GSA-H60L/DC07> at ata3-master SATA150
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 22 at device 13.0 on pci0
acpi_tz0: <Thermal Zone> on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd7fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
hpt27xx: no controller detected.
CAM: Configuring 4 busses
uhub0: 8 ports with 8 removable, self powered
CAM: finished configuring all busses
disk scheduler: set policy of cd0 to noop
cd0 at ata3 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GSA-H60L DC07> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub1: 8 ports with 8 removable, self powered
ugen0.2: <Logitech> at usbus0
ukbd0: <USB Keyboard> on usbus0
kbd2 at ukbd0
uhid0: <USB Keyboard> on usbus0
Mounting root from hammer:serno/JP1572JE0NYJ8K.s1d
HAMMER(ROOT) recovery check seqno=001289c4
HAMMER(ROOT) recovery range 3000000004fb6a70-3000000004fb6a70
HAMMER(ROOT) recovery nexto 3000000004fb6a70 endseqno=001289c5
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 292k, remaining available: 16384k
Mounting devfs
ugen0.2: <Logitech> at usbus0 (disconnected)
ukbd0: at uhub0, port 6, addr 2 (disconnected)
ukbd0: detached
uhid0: at uhub0, port 6, addr 2 (disconnected)
uhid0: detached