[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-16-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #29-Ubuntu SMP Tue Feb 14 12:48:51 UTC 2012 (Ubuntu 3.0.0-16.29-generic 3.0.20) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic root=UUID=267b6710-d486-4ff3-af58-6bc4f1606a51 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP35C-DS3R/EP35C-DS3R, BIOS F4 06/18/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask FE0000000 write-back [ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 512MB, type WB [ 0.000000] reg 4, base: 3583MB, range: 1MB, type UC [ 0.000000] total RAM covered: 8191M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 512MB, type WB [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5110] f5110 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000 [ 0.000000] 0100000000 - 0220000000 page 2M [ 0.000000] kernel direct mapping tables up to 220000000 @ dfed6000-dfee0000 [ 0.000000] RAMDISK: 365bc000 - 372d6000 [ 0.000000] ACPI: RSDP 00000000000f6b00 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfee3180 04B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: HPET 00000000dfee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000dfee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000220000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000 [ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217600000-ffff88021e7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00220000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00220000 [ 0.000000] On node 0 totalpages: 2096751 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 16128 pages used for memmap [ 0.000000] Normal zone: 1163520 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s79616 r8192 d22784 u524288 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066282 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic root=UUID=267b6710-d486-4ff3-af58-6bc4f1606a51 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8174724k/8912896k available (6140k kernel code, 525892k absent, 212280k reserved, 6894k data, 988k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.723 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.44 BogoMIPS (lpj=11998892) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004031] Security Framework initialized [ 0.004046] AppArmor: AppArmor initialized [ 0.004048] Yama: becoming mindful. [ 0.004708] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.009691] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011228] Mount-cache hash table entries: 256 [ 0.011356] Initializing cgroup subsys cpuacct [ 0.011361] Initializing cgroup subsys memory [ 0.011369] Initializing cgroup subsys devices [ 0.011371] Initializing cgroup subsys freezer [ 0.011373] Initializing cgroup subsys net_cls [ 0.011374] Initializing cgroup subsys blkio [ 0.011380] Initializing cgroup subsys perf_event [ 0.011407] CPU: Physical Processor ID: 0 [ 0.011408] CPU: Processor Core ID: 0 [ 0.011410] mce: CPU supports 6 MCE banks [ 0.011418] CPU0: Thermal monitoring enabled (TM2) [ 0.011421] using mwait in idle threads. [ 0.013645] ACPI: Core revision 20110413 [ 0.016030] ftrace: allocating 25748 entries in 101 pages [ 0.020388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062426] CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a [ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 9a000 [ 0.152078] #2 [ 0.152079] smpboot cpu 2: start_ip = 9a000 [ 0.244131] #3 Ok. [ 0.244134] smpboot cpu 3: start_ip = 9a000 [ 0.336033] Brought up 4 CPUs [ 0.336035] Total of 4 processors activated (23999.43 BogoMIPS). [ 0.339391] devtmpfs: initialized [ 0.339391] PM: Registering ACPI NVS region at dfee0000 (12288 bytes) [ 0.340902] print_constraints: dummy: [ 0.340923] Time: 19:16:01 Date: 03/05/12 [ 0.340952] NET: Registered protocol family 16 [ 0.340961] Trying to unpack rootfs image as initramfs... [ 0.341064] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.341067] ACPI: bus type pci registered [ 0.341115] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.341117] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.349763] PCI: Using configuration type 1 for base access [ 0.350372] bio: create slab at 0 [ 0.350372] ACPI: EC: Look up EC in DSDT [ 0.354670] ACPI: Interpreter enabled [ 0.354675] ACPI: (supports S0 S3 S4 S5) [ 0.354689] ACPI: Using IOAPIC for interrupt routing [ 0.357916] ACPI: No dock devices found. [ 0.357918] HEST: Table not found. [ 0.357921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.357958] [Firmware Bug]: ACPI: no secondary bus range in _CRS [ 0.357963] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.358045] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.358048] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.358050] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.358052] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.358054] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] [ 0.358064] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 [ 0.358098] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604 [ 0.358129] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.358132] pci 0000:00:01.0: PME# disabled [ 0.358163] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.358199] pci 0000:00:1a.0: reg 20: [io 0xe100-0xe11f] [ 0.358243] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.358278] pci 0000:00:1a.1: reg 20: [io 0xe200-0xe21f] [ 0.358321] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.358356] pci 0000:00:1a.2: reg 20: [io 0xe000-0xe01f] [ 0.358404] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.358418] pci 0000:00:1a.7: reg 10: [mem 0xfa104000-0xfa1043ff] [ 0.358494] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.358506] pci 0000:00:1b.0: reg 10: [mem 0xfa100000-0xfa103fff 64bit] [ 0.358562] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.358565] pci 0000:00:1b.0: PME# disabled [ 0.358582] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.358640] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.358643] pci 0000:00:1c.0: PME# disabled [ 0.358661] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 0.358718] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.358721] pci 0000:00:1c.3: PME# disabled [ 0.358737] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 [ 0.358795] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.358799] pci 0000:00:1c.4: PME# disabled [ 0.358818] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.358854] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f] [ 0.358897] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.358933] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f] [ 0.358976] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.359012] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f] [ 0.359058] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.359073] pci 0000:00:1d.7: reg 10: [mem 0xfa105000-0xfa1053ff] [ 0.359146] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.359201] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601 [ 0.359271] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.359275] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.359315] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101 [ 0.359327] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.359334] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.359340] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.359347] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.359354] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f] [ 0.359360] pci 0000:00:1f.2: reg 24: [io 0xf100-0xf10f] [ 0.359399] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.359411] pci 0000:00:1f.3: reg 10: [mem 0xfa106000-0xfa1060ff 64bit] [ 0.359429] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.359457] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 [ 0.359470] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707] [ 0.359477] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803] [ 0.359483] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907] [ 0.359490] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03] [ 0.359496] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f] [ 0.359503] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f] [ 0.359565] pci 0000:01:00.0: [10de:0611] type 0 class 0x000300 [ 0.359574] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.359583] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.359593] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.359599] pci 0000:01:00.0: reg 24: [io 0xb000-0xb07f] [ 0.359606] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.359651] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.359654] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.359656] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.359660] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.359692] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.359695] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.359699] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.359704] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.359751] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101 [ 0.359831] pci 0000:03:00.0: reg 24: [mem 0xfa000000-0xfa001fff] [ 0.359888] pci 0000:03:00.0: PME# supported from D3hot [ 0.359893] pci 0000:03:00.0: PME# disabled [ 0.359919] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101 [ 0.359940] pci 0000:03:00.1: reg 10: [io 0xc000-0xc007] [ 0.359953] pci 0000:03:00.1: reg 14: [io 0xc100-0xc103] [ 0.359965] pci 0000:03:00.1: reg 18: [io 0xc200-0xc207] [ 0.359978] pci 0000:03:00.1: reg 1c: [io 0xc300-0xc303] [ 0.359990] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f] [ 0.360077] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.360089] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.360092] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.360095] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfa0fffff] [ 0.360100] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.360167] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 [ 0.360188] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.360217] pci 0000:04:00.0: reg 18: [mem 0xf9000000-0xf9000fff 64bit] [ 0.360250] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.360323] pci 0000:04:00.0: supports D1 D2 [ 0.360325] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.360329] pci 0000:04:00.0: PME# disabled [ 0.360349] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.360358] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 0.360361] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.360364] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.360369] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.360421] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.360424] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.360427] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.360432] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.360434] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.360436] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.360438] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.360440] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.360442] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 0.360460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.360527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.360553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.360584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.360608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.360677] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.360680] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.360681] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.367813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.367850] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.367887] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.367922] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.367957] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.367994] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) [ 0.368040] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.368079] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.368184] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.368187] vgaarb: loaded [ 0.368189] vgaarb: bridge control possible 0000:01:00.0 [ 0.368336] SCSI subsystem initialized [ 0.368377] libata version 3.00 loaded. [ 0.368377] usbcore: registered new interface driver usbfs [ 0.368377] usbcore: registered new interface driver hub [ 0.368377] usbcore: registered new device driver usb [ 0.368377] PCI: Using ACPI for IRQ routing [ 0.369230] PCI: pci_cache_line_size set to 64 bytes [ 0.369302] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.369305] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff [ 0.369378] NetLabel: Initializing [ 0.369379] NetLabel: domain hash size = 128 [ 0.369380] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.369390] NetLabel: unlabeled traffic allowed by default [ 0.369422] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.369426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.369430] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.380161] Switching to clocksource hpet [ 0.383647] Switched to NOHz mode on CPU #0 [ 0.383685] Switched to NOHz mode on CPU #3 [ 0.383733] Switched to NOHz mode on CPU #1 [ 0.383783] Switched to NOHz mode on CPU #2 [ 0.385617] AppArmor: AppArmor Filesystem Enabled [ 0.385642] pnp: PnP ACPI init [ 0.385657] ACPI: bus type pnp registered [ 0.385739] pnp 00:00: [bus 00-ff] [ 0.385741] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.385743] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.385745] pnp 00:00: [io 0x0d00-0xffff window] [ 0.385746] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.385748] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.385750] pnp 00:00: [mem 0xdff00000-0xfebfffff window] [ 0.385798] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.385857] pnp 00:01: [io 0x0010-0x001f] [ 0.385858] pnp 00:01: [io 0x0022-0x003f] [ 0.385860] pnp 00:01: [io 0x0044-0x005f] [ 0.385861] pnp 00:01: [io 0x0062-0x0063] [ 0.385865] pnp 00:01: [io 0x0065-0x006f] [ 0.385866] pnp 00:01: [io 0x0074-0x007f] [ 0.385867] pnp 00:01: [io 0x0091-0x0093] [ 0.385869] pnp 00:01: [io 0x00a2-0x00bf] [ 0.385870] pnp 00:01: [io 0x00e0-0x00ef] [ 0.385872] pnp 00:01: [io 0x04d0-0x04d1] [ 0.385873] pnp 00:01: [io 0x0290-0x029f] [ 0.385874] pnp 00:01: [io 0x0800-0x087f] [ 0.385876] pnp 00:01: [io 0x0290-0x0294] [ 0.385877] pnp 00:01: [io 0x0880-0x088f] [ 0.385936] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.385938] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.385940] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.385942] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.385944] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.385947] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.385956] pnp 00:02: [dma 4] [ 0.385958] pnp 00:02: [io 0x0000-0x000f] [ 0.385959] pnp 00:02: [io 0x0080-0x0090] [ 0.385961] pnp 00:02: [io 0x0094-0x009f] [ 0.385962] pnp 00:02: [io 0x00c0-0x00df] [ 0.385986] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.386023] pnp 00:03: [irq 0 disabled] [ 0.386032] pnp 00:03: [irq 8] [ 0.386033] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.386056] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.386076] pnp 00:04: [io 0x0070-0x0073] [ 0.386098] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.386105] pnp 00:05: [io 0x0061] [ 0.386129] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.386136] pnp 00:06: [io 0x00f0-0x00ff] [ 0.386141] pnp 00:06: [irq 13] [ 0.386164] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.386334] pnp 00:07: [io 0x03f8-0x03ff] [ 0.386339] pnp 00:07: [irq 4] [ 0.386390] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.386524] pnp 00:08: [io 0x0378-0x037f] [ 0.386529] pnp 00:08: [irq 7] [ 0.386567] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.386650] pnp 00:09: [io 0x0400-0x04bf] [ 0.386688] system 00:09: [io 0x0400-0x04bf] has been reserved [ 0.386690] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.386833] pnp 00:0a: [mem 0xf0000000-0xf3ffffff] [ 0.386878] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.386881] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.386986] pnp 00:0b: [mem 0x000cce00-0x000cffff] [ 0.386988] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.386990] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.386991] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.386993] pnp 00:0b: [mem 0xdfee0000-0xdfefffff] [ 0.386994] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.386996] pnp 00:0b: [mem 0x00100000-0xdfedffff] [ 0.386997] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.386999] pnp 00:0b: [mem 0xfed10000-0xfed1dfff] [ 0.387000] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] [ 0.387002] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.387003] pnp 00:0b: [mem 0xffb00000-0xffb7ffff] [ 0.387005] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.387006] pnp 00:0b: [mem 0x000e0000-0x000effff] [ 0.387058] system 00:0b: [mem 0x000cce00-0x000cffff] has been reserved [ 0.387060] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.387062] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.387064] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.387067] system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.387069] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.387071] system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.387073] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.387075] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.387077] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.387079] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.387082] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.387084] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.387086] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved [ 0.387089] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.387103] pnp 00:0c: [mem 0xffb80000-0xffbfffff] [ 0.387138] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active) [ 0.387143] pnp: PnP ACPI: found 13 devices [ 0.387144] ACPI: ACPI bus type pnp unregistered [ 0.392848] PCI: max bus depth: 1 pci_try_num: 2 [ 0.392880] pci 0000:00:1c.4: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref] [ 0.392884] pci 0000:00:1c.3: BAR 15: assigned [mem 0xfa200000-0xfa3fffff 64bit pref] [ 0.392887] pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa400000-0xfa5fffff] [ 0.392891] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa600000-0xfa7fffff 64bit pref] [ 0.392894] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref] [ 0.392896] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.392898] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.392901] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.392904] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.392908] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.392910] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.392914] pci 0000:00:1c.0: bridge window [mem 0xfa400000-0xfa5fffff] [ 0.392917] pci 0000:00:1c.0: bridge window [mem 0xfa600000-0xfa7fffff 64bit pref] [ 0.392922] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.392925] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.392929] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfa0fffff] [ 0.392932] pci 0000:00:1c.3: bridge window [mem 0xfa200000-0xfa3fffff 64bit pref] [ 0.392938] pci 0000:04:00.0: BAR 6: assigned [mem 0xdff00000-0xdff1ffff pref] [ 0.392940] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 0.392942] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.392946] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.392949] pci 0000:00:1c.4: bridge window [mem 0xdff00000-0xdfffffff pref] [ 0.392954] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.392956] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.392960] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.392963] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.392977] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.392981] pci 0000:00:01.0: setting latency timer to 64 [ 0.392986] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.392989] pci 0000:00:1c.0: setting latency timer to 64 [ 0.392997] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.393000] pci 0000:00:1c.3: setting latency timer to 64 [ 0.393005] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.393008] pci 0000:00:1c.4: setting latency timer to 64 [ 0.393013] pci 0000:00:1e.0: setting latency timer to 64 [ 0.393016] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.393018] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.393020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.393021] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.393023] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.393025] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.393027] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.393029] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.393031] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.393033] pci_bus 0000:02: resource 1 [mem 0xfa400000-0xfa5fffff] [ 0.393035] pci_bus 0000:02: resource 2 [mem 0xfa600000-0xfa7fffff 64bit pref] [ 0.393037] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.393039] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff] [ 0.393041] pci_bus 0000:03: resource 2 [mem 0xfa200000-0xfa3fffff 64bit pref] [ 0.393043] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.393044] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.393046] pci_bus 0000:04: resource 2 [mem 0xdff00000-0xdfffffff pref] [ 0.393048] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.393050] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.393052] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.393054] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.393056] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.393058] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.393097] NET: Registered protocol family 2 [ 0.393292] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.394444] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.397563] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.397789] TCP: Hash tables configured (established 524288 bind 65536) [ 0.397791] TCP reno registered [ 0.397806] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.397846] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.397978] NET: Registered protocol family 1 [ 0.398126] pci 0000:01:00.0: Boot video device [ 0.398136] PCI: CLS 32 bytes, default 64 [ 0.398138] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.398140] Placing 64MB software IO TLB between ffff8800dbed6000 - ffff8800dfed6000 [ 0.398142] software IO TLB at phys 0xdbed6000 - 0xdfed6000 [ 0.398463] audit: initializing netlink socket (disabled) [ 0.398470] type=2000 audit(1330974961.392:1): initialized [ 0.433458] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.469360] VFS: Disk quotas dquot_6.5.2 [ 0.469407] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.469909] fuse init (API version 7.16) [ 0.469977] msgmni has been set to 15966 [ 0.470428] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.470469] io scheduler noop registered [ 0.470471] io scheduler deadline registered [ 0.470501] io scheduler cfq registered (default) [ 0.470594] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.470620] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.470654] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.470683] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.470729] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.470761] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.470807] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.470837] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.470898] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.470915] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.470949] intel_idle: MWAIT substates: 0x22220 [ 0.470951] intel_idle: does not run on family 6 model 23 [ 0.471010] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.471014] ACPI: Power Button [PWRB] [ 0.471057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.471060] ACPI: Power Button [PWRF] [ 0.471084] ACPI: acpi_idle registered with cpuidle [ 0.481107] ERST: Table is not found! [ 0.481182] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.501528] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.610362] Freeing initrd memory: 13416k freed [ 0.744471] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.744730] Linux agpgart interface v0.103 [ 0.745708] brd: module loaded [ 0.746120] loop: module loaded [ 0.746234] ata_piix 0000:00:1f.2: version 2.13 [ 0.746247] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.746251] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.746290] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.746554] scsi0 : ata_piix [ 0.746654] scsi1 : ata_piix [ 0.746952] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.746956] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.746977] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.746981] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.747024] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.747216] scsi2 : ata_piix [ 0.747299] scsi3 : ata_piix [ 0.747554] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.747557] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.747610] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 0.747615] pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.747645] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.747662] pata_acpi 0000:03:00.1: PCI INT B disabled [ 0.747886] Fixed MDIO Bus: probed [ 0.747905] PPP generic driver version 2.4.2 [ 0.747932] tun: Universal TUN/TAP device driver, 1.6 [ 0.747933] tun: (C) 1999-2004 Max Krasnyansky [ 0.747997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.748029] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.748055] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.748058] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.748084] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.751990] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.752019] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa104000 [ 0.764012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.764123] hub 1-0:1.0: USB hub found [ 0.764128] hub 1-0:1.0: 6 ports detected [ 0.764213] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.764222] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.764225] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.764252] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.768138] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.768150] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa105000 [ 0.784011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.784104] hub 2-0:1.0: USB hub found [ 0.784108] hub 2-0:1.0: 6 ports detected [ 0.784176] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.784194] uhci_hcd: USB Universal Host Controller Interface driver [ 0.784211] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.784215] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.784218] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.784242] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.784269] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 0.784359] hub 3-0:1.0: USB hub found [ 0.784362] hub 3-0:1.0: 2 ports detected [ 0.784411] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.784415] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.784418] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.784451] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.784477] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 0.784559] hub 4-0:1.0: USB hub found [ 0.784562] hub 4-0:1.0: 2 ports detected [ 0.784610] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.784616] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.784618] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.784644] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.784664] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 0.784750] hub 5-0:1.0: USB hub found [ 0.784753] hub 5-0:1.0: 2 ports detected [ 0.784799] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.784803] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.784805] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.784829] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.784849] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.784937] hub 6-0:1.0: USB hub found [ 0.784940] hub 6-0:1.0: 2 ports detected [ 0.784983] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.784987] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.784990] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.785016] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.785035] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 0.785123] hub 7-0:1.0: USB hub found [ 0.785126] hub 7-0:1.0: 2 ports detected [ 0.785172] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.785177] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.785179] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.785214] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.785233] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 0.785318] hub 8-0:1.0: USB hub found [ 0.785321] hub 8-0:1.0: 2 ports detected [ 0.785398] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.785721] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.785727] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.785815] mousedev: PS/2 mouse device common for all mice [ 0.785907] rtc_cmos 00:04: RTC can wake from S4 [ 0.785982] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.786003] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.786084] device-mapper: uevent: version 1.0.3 [ 0.786140] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 0.786147] cpuidle: using governor ladder [ 0.786148] cpuidle: using governor menu [ 0.786149] EFI Variables Facility v0.08 2004-May-17 [ 0.786353] TCP cubic registered [ 0.786447] NET: Registered protocol family 10 [ 0.786831] NET: Registered protocol family 17 [ 0.786843] Registering the dns_resolver key type [ 0.786922] PM: Hibernation image not present or could not be loaded. [ 0.786934] registered taskstats version 1 [ 0.809676] Magic number: 4:92:293 [ 0.809719] tty tty26: hash matches [ 0.809779] rtc_cmos 00:04: setting system clock to 2012-03-05 19:16:02 UTC (1330974962) [ 0.809812] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.809813] EDD information not available. [ 1.074550] ata3: SATA link down (SStatus 0 SControl 300) [ 1.085099] ata4: SATA link down (SStatus 0 SControl 300) [ 1.308014] usb 1-5: new high speed USB device number 4 using ehci_hcd [ 1.406575] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.406585] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.417172] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.417182] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.417198] Refined TSC clocksource calibration: 2999.999 MHz. [ 1.417207] Switching to clocksource tsc [ 1.418674] Freeing unused kernel memory: 988k freed [ 1.418844] Write protecting the kernel read-only data: 12288k [ 1.424752] Freeing unused kernel memory: 2032k freed [ 1.429071] Freeing unused kernel memory: 1388k freed [ 1.442906] udevd[95]: starting version 173 [ 1.470147] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.470193] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.473721] scsi4 : pata_jmicron [ 1.474871] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.474891] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.474932] r8169 0000:04:00.0: setting latency timer to 64 [ 1.474999] r8169 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.475358] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000c62000, 00:1d:7d:01:7f:be, XID 18000000 IRQ 44 [ 1.475391] scsi5 : pata_jmicron [ 1.475818] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16 [ 1.475821] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16 [ 1.475998] ahci 0000:03:00.0: version 3.0 [ 1.476020] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.482491] usbcore: registered new interface driver uas [ 1.492164] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.492168] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.492174] ahci 0000:03:00.0: setting latency timer to 64 [ 1.492460] scsi6 : ahci [ 1.492527] scsi7 : ahci [ 1.492608] ata7: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 19 [ 1.492611] ata8: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 19 [ 1.636495] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66 [ 1.652490] ata5.00: configured for UDMA/66 [ 1.653557] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5 [ 1.655929] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.655932] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.656078] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.656155] sr 4:0:0:0: Attached scsi generic sg0 type 5 [ 1.680010] usb 3-1: new full speed USB device number 2 using uhci_hcd [ 1.923562] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2 [ 1.923631] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0 [ 1.926738] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input3 [ 1.926855] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1 [ 1.932378] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2 [ 1.932397] usbcore: registered new interface driver usbhid [ 1.932398] usbhid: USB HID core driver [ 1.984024] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.984047] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.984395] ata8.00: ATA-9: M4-CT128M4SSD2, 0002, max UDMA/100 [ 1.984399] ata8.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.984778] ata8.00: configured for UDMA/100 [ 2.012697] ata7.00: HPA detected: current 625140335, native 625142448 [ 2.022363] ata7.00: failed to enable AA(error_mask=0x1) [ 2.022367] ata7.00: ATA-8: ST3320613AS, SD22, max UDMA/133 [ 2.022370] ata7.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.073908] ata7.00: failed to enable AA(error_mask=0x1) [ 2.073913] ata7.00: configured for UDMA/133 [ 2.074014] scsi 6:0:0:0: Direct-Access ATA ST3320613AS SD22 PQ: 0 ANSI: 5 [ 2.074142] sd 6:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB) [ 2.074150] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 2.074185] sd 6:0:0:0: [sda] Write Protect is off [ 2.074188] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.074209] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.074260] scsi 7:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0002 PQ: 0 ANSI: 5 [ 2.074391] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 2.074416] sd 7:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.074485] sd 7:0:0:0: [sdb] Write Protect is off [ 2.074488] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.074509] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.075375] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 2.075681] sd 7:0:0:0: [sdb] Attached SCSI disk [ 2.116013] usb 3-2: new full speed USB device number 3 using uhci_hcd [ 2.200575] sda: sda2 < sda5 > [ 2.200815] sd 6:0:0:0: [sda] Attached SCSI disk [ 2.201518] Initializing USB Mass Storage driver... [ 2.201786] scsi8 : usb-storage 1-5:1.0 [ 2.201880] usbcore: registered new interface driver usb-storage [ 2.201881] USB Mass Storage support registered. [ 2.245889] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 2.308604] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4 [ 2.308684] generic-usb 0003:046D:C318.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input0 [ 2.312393] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input5 [ 2.312489] generic-usb 0003:046D:C318.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input1 [ 3.403412] udevd[342]: starting version 173 [ 3.409232] lp: driver loaded but no devices found [ 3.448785] Adding 7811068k swap on /dev/sdb1. Priority:-1 extents:1 across:7811068k SS [ 3.461712] nvidia: module license 'NVIDIA' taints kernel. [ 3.461715] Disabling lock debugging due to kernel taint [ 3.492363] udevd[364]: renamed network interface eth0 to eth1 [ 3.498387] parport_pc 00:08: reported by Plug and Play ACPI [ 3.498429] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 3.581159] ppdev: user-space parallel port driver [ 3.592136] lp0: using parport0 (interrupt-driven). [ 3.604132] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.604174] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 3.604194] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 3.611831] type=1400 audit(1330974965.295:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=573 comm="apparmor_parser" [ 3.611870] type=1400 audit(1330974965.295:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=514 comm="apparmor_parser" [ 3.612149] type=1400 audit(1330974965.299:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser" [ 3.612205] type=1400 audit(1330974965.299:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser" [ 3.612349] type=1400 audit(1330974965.299:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser" [ 3.612412] type=1400 audit(1330974965.299:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser" [ 4.177521] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.177529] nvidia 0000:01:00.0: setting latency timer to 64 [ 4.177533] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 4.177634] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 [ 4.212455] scsi 8:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [ 4.512213] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 4.540881] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro [ 4.698609] vesafb: mode is 1600x1200x32, linelength=6400, pages=0 [ 4.698611] vesafb: scrolling: redraw [ 4.698613] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.702604] vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90005a80000, using 7552k, total 7552k [ 4.702780] Console: switching to colour frame buffer device 200x75 [ 4.702810] fb0: VESA VGA frame buffer device [ 4.772939] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.812861] type=1400 audit(1330974966.499:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=893 comm="apparmor_parser" [ 4.813283] type=1400 audit(1330974966.499:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=893 comm="apparmor_parser" [ 4.836979] type=1400 audit(1330974966.523:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=917 comm="apparmor_parser" [ 4.856563] r8169 0000:04:00.0: eth1: link down [ 4.857333] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 4.885882] init: failsafe main process (846) killed by TERM signal [ 4.886224] init: apport pre-start process (954) terminated with status 1 [ 4.892548] init: apport post-stop process (981) terminated with status 1 [ 4.935837] Bluetooth: Core ver 2.16 [ 4.935858] NET: Registered protocol family 31 [ 4.935860] Bluetooth: HCI device and connection manager initialized [ 4.935862] Bluetooth: HCI socket layer initialized [ 4.935863] Bluetooth: L2CAP socket layer initialized [ 4.935902] Bluetooth: SCO socket layer initialized [ 4.937714] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.937716] Bluetooth: BNEP filters: protocol multicast [ 6.544787] r8169 0000:04:00.0: eth1: link up [ 6.545583] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 10.581832] sd 8:0:0:0: [sdc] Spinning up disk.... [ 17.360008] eth1: no IPv6 routers present [ 20.680006] ...............not responding... [ 125.699506] sd 8:0:0:0: [sdc] READ CAPACITY failed [ 125.699509] sd 8:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 125.699513] sd 8:0:0:0: [sdc] Sense Key : Not Ready [current] [ 125.699517] sd 8:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready [ 127.721995] sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 129.744484] sd 8:0:0:0: [sdc] Asking for cache data failed [ 129.744488] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 138.845057] sd 8:0:0:0: [sdc] Spinning up disk................. [ 240.412018] INFO: task modprobe:830 blocked for more than 120 seconds. [ 240.412021] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.412024] modprobe D ffffffff81805120 0 830 829 0x00000000 [ 240.412029] ffff88020943deb8 0000000000000086 0000000000000000 ffffffffa0bd71a0 [ 240.412033] ffff88020943dfd8 ffff88020943dfd8 ffff88020943dfd8 0000000000012a40 [ 240.412038] ffff880212d28000 ffff880210b8c560 ffff88020943dea8 000000000000000d [ 240.412042] Call Trace: [ 240.412051] [] schedule+0x3f/0x60 [ 240.412055] [] async_synchronize_cookie_domain+0x75/0x120 [ 240.412060] [] ? add_wait_queue+0x60/0x60 [ 240.412063] [] async_synchronize_cookie+0x15/0x20 [ 240.412066] [] async_synchronize_full+0x1c/0x40 [ 240.412070] [] sys_init_module+0x107/0x230 [ 240.412074] [] system_call_fastpath+0x16/0x1b [ 240.412077] INFO: task modprobe:857 blocked for more than 120 seconds. [ 240.412079] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.412081] modprobe D 0000000000000003 0 857 848 0x00000000 [ 240.412085] ffff880208a1beb8 0000000000000082 0000000000000000 ffffffffa0be2120 [ 240.412089] ffff880208a1bfd8 ffff880208a1bfd8 ffff880208a1bfd8 0000000000012a40 [ 240.412093] ffff880212d41720 ffff880206462e40 ffff880208a1bea8 000000000000000d [ 240.412097] Call Trace: [ 240.412100] [] schedule+0x3f/0x60 [ 240.412103] [] async_synchronize_cookie_domain+0x75/0x120 [ 240.412107] [] ? add_wait_queue+0x60/0x60 [ 240.412110] [] async_synchronize_cookie+0x15/0x20 [ 240.412113] [] async_synchronize_full+0x1c/0x40 [ 240.412116] [] sys_init_module+0x107/0x230 [ 240.412119] [] system_call_fastpath+0x16/0x1b [ 240.412124] INFO: task bluetoothd:1006 blocked for more than 120 seconds. [ 240.412126] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.412128] bluetoothd D ffffffff81805120 0 1006 1 0x00000000 [ 240.412132] ffff880208a2bb88 0000000000000086 ffff880208a2bb68 ffffffff8104691d [ 240.412136] ffff880208a2bfd8 ffff880208a2bfd8 ffff880208a2bfd8 0000000000012a40 [ 240.412140] ffff880212d44560 ffff880210b45c80 ffff880208a2bb88 7fffffffffffffff [ 240.412144] Call Trace: [ 240.412147] [] ? select_idle_sibling+0x9d/0x160 [ 240.412150] [] schedule+0x3f/0x60 [ 240.412153] [] schedule_timeout+0x2a5/0x320 [ 240.412156] [] ? ttwu_queue+0x92/0xd0 [ 240.412160] [] ? try_to_wake_up+0x18e/0x200 [ 240.412163] [] wait_for_common+0xdf/0x180 [ 240.412166] [] ? try_to_wake_up+0x200/0x200 [ 240.412176] [] ? bt_sock_create+0x1b3/0x1d0 [bluetooth] [ 240.412179] [] wait_for_completion+0x1d/0x20 [ 240.412183] [] call_usermodehelper_exec+0xdf/0xf0 [ 240.412187] [] __request_module+0x175/0x240 [ 240.412192] [] ? sock_alloc_inode+0x1d/0xc0 [ 240.412196] [] ? kmem_cache_alloc_trace+0x11d/0x140 [ 240.412200] [] ? security_inode_alloc+0x1e/0x20 [ 240.412208] [] bt_sock_create+0x1b3/0x1d0 [bluetooth] [ 240.412212] [] ? new_inode+0x52/0x60 [ 240.412215] [] __sock_create+0x170/0x320 [ 240.412219] [] ? __fput+0x153/0x210 [ 240.412222] [] sock_create+0x30/0x40 [ 240.412225] [] sys_socket+0x2b/0x70 [ 240.412228] [] ? page_fault+0x25/0x30 [ 240.412232] [] system_call_fastpath+0x16/0x1b [ 240.412234] INFO: task rfcomm:1007 blocked for more than 120 seconds. [ 240.412236] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.412238] rfcomm D ffffffff81805120 0 1007 998 0x00000000 [ 240.412242] ffff88020883dbe8 0000000000000082 0000000000000000 0000000200000000 [ 240.412246] ffff88020883dfd8 ffff88020883dfd8 ffff88020883dfd8 0000000000012a40 [ 240.412251] ffff880212d28000 ffff880206494560 ffff88020883dbe8 7fffffffffffffff [ 240.412255] Call Trace: [ 240.412258] [] schedule+0x3f/0x60 [ 240.412260] [] schedule_timeout+0x2a5/0x320 [ 240.412264] [] ? ttwu_queue+0x92/0xd0 [ 240.412267] [] ? try_to_wake_up+0x18e/0x200 [ 240.412270] [] wait_for_common+0xdf/0x180 [ 240.412272] [] ? try_to_wake_up+0x200/0x200 [ 240.412276] [] ? __sock_create+0x2bd/0x320 [ 240.412279] [] wait_for_completion+0x1d/0x20 [ 240.412282] [] call_usermodehelper_exec+0xdf/0xf0 [ 240.412286] [] __request_module+0x175/0x240 [ 240.412289] [] ? sock_alloc_inode+0x57/0xc0 [ 240.412292] [] ? inode_sb_list_add+0x5b/0x70 [ 240.412296] [] __sock_create+0x2bd/0x320 [ 240.412299] [] sock_create+0x30/0x40 [ 240.412307] [] sys_socket+0x2b/0x70 [ 240.412309] [] ? page_fault+0x25/0x30 [ 240.412312] [] system_call_fastpath+0x16/0x1b [ 240.412314] INFO: task modprobe:1009 blocked for more than 120 seconds. [ 240.412315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.412317] modprobe D 0000000000000002 0 1009 1008 0x00000000 [ 240.412320] ffff880211625eb8 0000000000000086 0000000000000000 ffffffffa0c06ae0 [ 240.412323] ffff880211625fd8 ffff880211625fd8 ffff880211625fd8 0000000000012a40 [ 240.412326] ffff880206491720 ffff88020644dc80 ffff880211625ea8 000000000000000d [ 240.412329] Call Trace: [ 240.412331] [] schedule+0x3f/0x60 [ 240.412334] [] async_synchronize_cookie_domain+0x75/0x120 [ 240.412336] [] ? add_wait_queue+0x60/0x60 [ 240.412339] [] async_synchronize_cookie+0x15/0x20 [ 240.412341] [] async_synchronize_full+0x1c/0x40 [ 240.412343] [] sys_init_module+0x107/0x230 [ 240.412346] [] system_call_fastpath+0x16/0x1b [ 240.412348] INFO: task modprobe:1014 blocked for more than 120 seconds. [ 240.412349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.412351] modprobe D ffffffff81805120 0 1014 1013 0x00000000 [ 240.412354] ffff88020eb47eb8 0000000000000086 0000000000000000 ffffffffa0c1d200 [ 240.412357] ffff88020eb47fd8 ffff88020eb47fd8 ffff88020eb47fd8 0000000000012a40 [ 240.412360] ffff880212d2dc80 ffff880212a12e40 ffff88020eb47ea8 000000000000000d [ 240.412363] Call Trace: [ 240.412365] [] schedule+0x3f/0x60 [ 240.412368] [] async_synchronize_cookie_domain+0x75/0x120 [ 240.412370] [] ? add_wait_queue+0x60/0x60 [ 240.412372] [] async_synchronize_cookie+0x15/0x20 [ 240.412375] [] async_synchronize_full+0x1c/0x40 [ 240.412377] [] sys_init_module+0x107/0x230 [ 240.412379] [] system_call_fastpath+0x16/0x1b [ 242.844016] ..not responding... [ 255.979497] sd 8:0:0:0: [sdc] READ CAPACITY failed [ 255.979500] sd 8:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 255.979504] sd 8:0:0:0: [sdc] Sense Key : Not Ready [current] [ 255.979507] sd 8:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready [ 258.001987] sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 260.024481] sd 8:0:0:0: [sdc] Asking for cache data failed [ 260.024483] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 260.024485] sd 8:0:0:0: [sdc] Attached SCSI disk [ 260.029291] Bluetooth: RFCOMM TTY layer initialized [ 260.029297] Bluetooth: RFCOMM socket layer initialized [ 260.029299] Bluetooth: RFCOMM ver 1.11 [ 260.226372] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro,commit=0 [ 260.229167] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 262.198310] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro,commit=0 [ 262.201157] EXT4-fs (sda5): re-mounted. Opts: commit=0