04.07.15 22:58:18,527 iTunes[77493]: tid:20367 - dumping CFError returned by restored:
04.07.15 22:58:18,528 iTunes[77493]: tid:20367 - CFError domain:AMRestoreErrorDomain code:-1 description:failed to update device firmware
04.07.15 22:58:18,528 iTunes[77493]: tid:20367 - CFError domain:AMRestoreErrorDomain code:-1 description:ramrod firmware update failed
04.07.15 22:58:18,528 iTunes[77493]: tid:20367 - CFError domain:RamrodErrorDomain code:1004 description:update_baseband: failed to perform next stage
04.07.15 22:58:18,528 iTunes[77493]: tid:20367 - CFError domain:BBUpdater code:48 description:Modem returned to download mode
04.07.15 22:58:18,547 iTunes[77493]: tid:20367 - regex matching failed for '[0-9a-fA-F]{40}': 0
04.07.15 22:58:18,580 iTunes[77493]: tid:20367 - regex matching failed for '[0-9a-fA-F]{40}': 0
04.07.15 22:58:18,582 iTunes[77493]: tid:20367 - regex matching failed for '[0-9a-fA-F]{40}': 0
04.07.15 22:58:18,582 iTunes[77493]: tid:20367 - regex matching failed for '[0-9a-fA-F]{40}': 0
04.07.15 22:58:18,582 iTunes[77493]: tid:20367 - regex matching failed for '[0-9a-fA-F]{40}': 0
04.07.15 22:58:19,311 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,315 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,320 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,323 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,330 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,332 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,339 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,341 iTunes[77493]: tid:20367 - regex matching failed for '"ChipSerialNo"[^
]*bytes = 0x[0-9a-fA-F]*}': 0
04.07.15 22:58:19,487 iTunes[77493]: tid:20367 - regex matching failed for '([0-9a-fA-F][0-9a-fA-F]:){5}([0-9a-fA-F][0-9a-fA-F])': 0
04.07.15 22:58:19,936 iTunes[77493]: tid:20367 - 
==== device restore output ====
SYSLOG: Jan  7 12:01:38 localhost bootlog[0] <Notice>: BOOT_TIME 561698 0
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: g with score 4AppleD1881PMUPowerSource: Setting battery threshold for PMU buck control to 4000 mV
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@2173] read valid partition table
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 0 as 'Boot Block'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 1 as 'Effaceable'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: L2TP domain init
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: L2TP domain init complete
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: PPTP domain init
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 4
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 5 as 'System Config'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleSwissPPNFTL started with IOFlashStoragePartition provider
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleNANDFTL registeredScaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 7
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleRGBOUT: TVOUT device is detected
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: virtual bool AppleH4DisplayPipe::start_hardware(IOService *), auto-detect chip 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [NAND] start:356 this 0x861cec00 PROVIDER=0x86212e80 flashMedia=0x86212e80
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleBaseband: Found 0 backpowering pins
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [NAND] WMR_Start:174 FIL_Init  [OK]
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: void AppleDisplayPipe::setupVideoDownscalingLimits() called on secondary display with no timing settings!
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleH4CamIn::start - back camera expected
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleH4CamIn::start - front camera expected
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleH4CamIn::power_off_hardware
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleH4CamIn:XXXXXXXXXXXXXXXXXXX: 0
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [HPark] GammaCoreIP::start: 0xc454a800, highland-park mIISNub: 0x86212600, sampleRate = 44100, ol=7, oi=7
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: virtual bool AppleH4DisplayPipe::start_hardware(IOService *), auto-detect chip 
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [HPark] GammaCoreIP::setPowerState() function called whereas Start() is not finished
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleMultitouchN1SPI: successfully started
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleARMPMUCharger: AppleUSBCableDetect 1
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [NAND] WMR_Open:371 VFL_Open    [OK]
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleARMPMUCharger: AppleUSBCableType USBHost
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: [HPark] GammaCoreIP ATSc values: [ mic1: 0x00000008, mic2: 0x0000fffd, mic3: 0x00000000, recv: 0x0000ffff, spk: 0x00000000 ]
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
SYSLOG: Jan  7 12:01:38 localhost kernel[0] <Notice>: AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: AppleBCMWLANCore::init IO80211-154.5 Jun 24 2015 00:45:44
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: 000070.097228 wlan0.A[0] AppleBCMWLANProvisioningManager::gatherDeviceTreeData():  WARNING, Wifi 'serial baud rate' does not exist in the device tree
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: 000070.101695 wlan0.A[1] AppleBCMWLANConfigManager::gatherParameterData():  no provisioned roam profiles. Using default.
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: 000070.103735 wlan0.N[2] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: 000070.104130 wlan0.N[3] AppleBCMWLANCore:XXXXXXXXXXXXXXXXXXX():   powerState 1, fStateFlags 0x20, dev 0xc47d6800 (this 1, provider 0)
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: 000070.104162 wlan0.N[4] AppleBCMWLANCore:XXXXXXXXXXXXXXXXXXX():  Received power state change before driver has initialized, ignoring
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: IO80211PeerManager::initWithInterface can't add monitoring timer
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: IO80211Interface::init peerManager=0x8782d400
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: 000070.110726 wlan0.N[5] AppleBCMWLANCore::populateRequestedFiles():  No module-instance property defined
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
unable to open /dev/klog: Resource busy
display-scale = 2
display-rotation = 0
found applelogo at /usr/share/progressui/applelogo@2x.tga
SYSLOG: Jan  7 12:01:39 localhost restored_external[6] <Error>: IOMFB: /System/Library/Frameworks/MediaToolbox.framework/MediaToolbox not found
SYSLOG: Jan  7 12:01:39 localhost restored_external[6] <Error>: IOMFB: /System/Library/PrivateFrameworks/MediaToolbox.framework/MediaToolbox not found
SYSLOG: Jan  7 12:01:39 localhost restored_external[6] <Error>: IOMFB: /System/Library/PrivateFrameworks/Celestial.framework/Celestial not found
SYSLOG: Jan  7 12:01:39 localhost restored_external[6] <Error>: IOMFB: FigInstallVirtualDisplay not found
SYSLOG: Jan  7 12:01:39 localhost restored_external[6] <Error>: CFPreferences could not connect to its daemon.
	 Preferences using the connection 0x0 will be volatile and will not be persisted to disk.
found display: primary
display: 640 x 960
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [NAND] WMR_Open:420 FTL_Open    [OK]
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [NAND] _publishServices:642 FTL capabilities: 0x00000001
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 44 max_count: 44
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [NAND] _fetchBorrowedList:881 number of borrowed blocks 37
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 0
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 1
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 2
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 3
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 5
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: [nand_part_core:INF@ 157] published partition 6
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: Loading syscfg.
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice - Configuration: Apple Mobile Device
SYSLOG: Jan  7 12:01:39 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice          Interface: AppleUSBMux
SYSLOG: Jan  7 12:01:40 localhost kernel[0] <Notice>: virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 24 2015 00:40:24
SYSLOG: Jan  7 12:01:40 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
SYSLOG: Jan  7 12:01:40 localhost kernel[0] <Notice>: AppleSynopsysOTGDevice::startUSBStack Starting usb stack
waiting for matching IOKit service: <CFBasicHash 0x14611340 [0x5a28b0]>{type = mutable dict, count = 1,
entries =>
	2 : <CFString 0x762840 [0x5a28b0]>{contents = "IOProviderClass"} = <CFString 0x146140a0 [0x5a28b0]>{contents = "AppleUSBDeviceMux"}
}
SYSLOG: Jan  7 12:01:40 localhost kernel[0] <Notice>: [effaceable:INIT] found current generation, 294, in group 1
SYSLOG: Jan  7 12:01:40 localhost kernel[0] <Notice>: [effaceable:INIT] started
SYSLOG: Jan  7 12:01:40 localhost kernel[0] <Notice>: [effaceable:INIT] started
SYSLOG: Jan  7 12:01:40 localhost kernel[0] <Notice>: AppleARMBacklight::start: No AAP function
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: IOReturn AppleUSBDeviceMux:XXXXXXXXXXXXXXXXXXX(OSObject *) setting debug level to 7
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8268
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8268 established 62078<-lo0->49153 62078<-usb->31493
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49154 62078<-usb->31749
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f81b8 established 62078<-lo0->49155 62078<-usb->32005
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8160 established 62078<-lo0->49156 62078<-usb->32261
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8268
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8268 established 62078<-lo0->49157 62078<-usb->32517
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49158 62078<-usb->32773
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8160
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8268
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f81b8
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f81b8 established 62078<-lo0->49159 62078<-usb->33029
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49160 62078<-usb->33285
recv(11, 4) failed: connection closed
recv(12, 4) failed: connection closed
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
recv(13, 4) failed: connection closed
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49161 62078<-usb->33541
recv(15, 4) failed: connection closed
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
recv(16, 4) failed: connection closed
recv(17, 4) failed: connection closed
recv(14, 4) failed: connection closed
unable to read message size: -1
unable to read message size: -1
recv(19, 4) failed: connection closed
unable to read message size: -1
recv(20, 4) failed: connection closed
unable to read message size: -1
unable to read message size: -1
unable to read message size: -1
unable to read message size: -1
could not receive message
could not receive message
unable to read message size: -1
could not receive message
unable to read message size: -1
could not receive message
could not receive message
could not receive message
could not receive message
could not receive message
could not receive message
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49162 62078<-usb->33797
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
recv(11, 4) failed: connection closed
unable to read message size: -1
could not receive message
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49163 62078<-usb->34053
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49164 62078<-usb->34309
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
recv(11, 4) failed: connection closed
recv(12, 4) failed: connection closed
unable to read message size: -1
unable to read message size: -1
could not receive message
could not receive message
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49165 62078<-usb->34565
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49166 62078<-usb->34821
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49167 62078<-usb->35077
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
recv(11, 4) failed: connection closed
recv(12, 4) failed: connection closed
recv(13, 4) failed: connection closed
unable to read message size: -1
unable to read message size: -1
unable to read message size: -1
could not receive message
could not receive message
could not receive message
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49168 62078<-usb->35333
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49169 62078<-usb->35589
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49170 62078<-usb->35845
recv(11, 4) failed: connection closed
recv(12, 4) failed: connection closed
unrecognized key 'BootArgs' in value query
unable to read message size: -1
unable to read message size: -1
failed to handle value query for key 'BootArgs', sending back empty response
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49171 62078<-usb->36101
could not receive message
could not receive message
recv(13, 4) failed: connection closed
unrecognized key 'MarketingPartNumber' in value query
unable to read message size: -1
failed to handle value query for key 'MarketingPartNumber', sending back empty response
could not receive message
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x886f8210 established 62078<-lo0->49172 62078<-usb->36357
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x886f8210
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
SYSLOG: Jan  7 12:01:43 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
recv(14, 4) failed: connection closed
recv(11, 4) failed: connection closed
client protocol version 13
unable to read message size: -1
unable to read message size: -1
*** UUID 8F3B3D0C-75EB-4E5F-A188-B452647BA85F ***
could not receive message
could not receive message
Restore options:
	UUID                           => <CFString 0x1451fa80 [0x5a28b0]>{contents = "8F3B3D0C-75EB-4E5F-A188-B452647BA85F"}
	MinimumSystemPartition         => <CFNumber 0x1451b410 [0x5a28b0]>{value = +2010, type = kCFNumberSInt64Type}
	SystemPartitionSize            => <CFNumber 0x145202e0 [0x5a28b0]>{value = +2010, type = kCFNumberSInt64Type}
	SystemPartitionPadding         => <CFBasicHash 0x1451f340 [0x5a28b0]>{type = mutable dict, count = 9,
entries =>
	0 : <CFString 0x1451f9c0 [0x5a28b0]>{contents = "512"} = <CFNumber 0x1451f880 [0x5a28b0]>{value = +1280, type = kCFNumberSInt64Type}
	2 : <CFString 0x1451f680 [0x5a28b0]>{contents = "128"} = <CFNumber 0x1451ff20 [0x5a28b0]>{value = +1280, type = kCFNumberSInt64Type}
	3 : <CFString 0x1451fbb0 [0x5a28b0]>{contents = "16"} = <CFNumber 0x1451f5f0 [0x5a28b0]>{value = +260, type = kCFNumberSInt64Type}
	4 : <CFString 0x1451f9f0 [0x5a28b0]>{contents = "32"} = <CFNumber 0x1451f9b0 [0x5a28b0]>{value = +320, type = kCFNumberSInt64Type}
	5 : <CFString 0x1451f8f0 [0x5a28b0]>{contents = "768"} = <CFNumber 0x1451f920 [0x5a28b0]>{value = +1280, type = kCFNumberSInt64Type}
	6 : <CFString 0x1451f930 [0x5a28b0]>{contents = "8"} = <CFNumber 0x145202b0 [0x5a28b0]>{value = +180, type = kCFNumberSInt64Type}
	7 : <CFString 0x14513070 [0x5a28b0]>{contents = "1024"} = <CFNumber 0x14519980 [0x5a28b0]>{value = +1280, type = kCFNumberSInt64Type}
	8 : <CFS...
entering bootstrap_hoover
bootstrap_hoover: using customer firmware
unable to open libdpfu.dylib. dlopen(/usr/local/lib/libdpfu.dylib, 261): image not found, skipping step
entering load_sep_os
device has no sep
entering ramrod_ticket_update
looking up root ticket hash
device tree ticket-hash: <CFData 0x1451fc10 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
received valid ticket (2738 bytes)
entering partition_nand_device
device supports boot-from-NAND
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND initialized. Waiting for devnode.
entering clear_remap_variable
executing /usr/sbin/nvram
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log=
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
   Executing fsck_hfs (version hfs-286.30.1).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
   The volume name is Copper12H143.N94OS
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Copper12H143.N94OS appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
AMSupportPlatformCreateBufferFromNativeFilePath: open failed: No such file or directory
__getFDRSealingMap_block_invoke: Could not load sealing map from '/usr/lib/FDRSealingMap.plist'
AMFDRSealingMapGetEntriesForDevice: Could not load sealing map
restored_fdr_initialize returned false
RestoredFDRCreate() returned 0
FDR is not supported on this device
RestoredFDRSaveData: restoredFDR is NULL, not able to preserve FDR data.
RestoredFDRSaveData success
entering check_for_restore_log
found restore log (size = 66338)
executing /sbin/fsck_hfs
** /dev/rdisk0s1s2
   Executing fsck_hfs (version hfs-286.30.1).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
   The volume name is Data
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s2 mounted on /mnt2
entering dump_panic_logs
executing /System/Library/CoreServices/DumpPanic
entering check_for_ota_logs_with_mount_point
restore log does not exist
skipping log submission, failed to read user settings from: /mnt2/mobile/Library/ConfigurationProfiles/EffectiveUserSettings.plist
Diagnostic log submission disabled
Searching /mnt2/mobile/Library/Logs/CrashReporter/
check_for_ota_logs_with_mount_point complete
Successfully checked for OTA logs
entering unmount_filesystems
create_baseband_update_options: Got imeisv: 19
baseband updater options = <CFBasicHash 0x146121c0 [0x5a28b0]>{type = mutable dict, count = 3,
entries =>
	0 : <CFString 0xd0eee8 [0x5a28b0]>{contents = "IMEISwVersion"} = <CFNumber 0x145201b0 [0x5a28b0]>{value = +19, type = kCFNumberSInt32Type}
	1 : <CFString 0xd0ef78 [0x5a28b0]>{contents = "autoSetupEnv"} = <CFBoolean 0x5a2ab8 [0x5a28b0]>{value = false}
	2 : <CFString 0xd0ef88 [0x5a28b0]>{contents = "disablePing"} = <CFBoolean 0x5a2ab0 [0x5a28b0]>{value = true}
}
_baseband_update_requires_filesystems_once: querying baseband to determine if it requires system filesystem
bbupdater: cmdCopyRequirePartitionMount: supports flashless 1
bbupdater: cmdCopyRequirePartitionMount: supports REFS 0
bbupdater: cmdCopyRequirePartitionMount: need data partition for coredumps
_baseband_update_requires_filesystems_once: query returned <CFBasicHash 0x14520020 [0x5a28b0]>{type = mutable dict, count = 3,
entries =>
	0 : <CFString 0xd0ec18 [0x5a28b0]>{contents = "requireSystemPartitionMount"} = <CFBoolean 0x5a2ab0 [0x5a28b0]>{value = true}
	1 : <CFString 0xd0ec38 [0x5a28b0]>{contents = "requireUserPartitionMount"} = <CFBoolean 0x5a2ab0 [0x5a28b0]>{value = true}
	2 : <CFString 0xd0ec48 [0x5a28b0]>{contents = "requestedBasebandFSPartitionMountSize"} = <CFNumber 0x1451b2f0 [0x5a28b0]>{value = +0, type = kCFNumberSInt32Type}
}
entering clean_NAND
NAND format complete
entering ramrod_probe_media
find_filesystem_partitions: storage=/dev/disk0 system= data= baseband data= log=
entering format_effaceable_storage
effaceable storage is formatted, clearing it
effaceable storaged cleared
entering format_storage_for_LwVM
entering ramrod_probe_media
device partitioning scheme is GPT
unexpected partition 'LwVM' - skipping
find_filesystem_partitions: storage=/dev/disk0s1 system= data= baseband data= log=
entering create_filesystem_partitions
User specified system partition size, skipping firmware extras size.
system partition padding size is: 272629760 bytes
unable to open : No such file or directory
creating 2 partitions
creating encrypted data partition
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log=
wipe entire partition: 1 (old = 0 new = 2270)
block size for /dev/disk0s1s1: 4096
/sbin/newfs_hfs -s -v System -J /dev/disk0s1s1 
executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
block size for /dev/disk0s1s2: 4096
/sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2 
executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log=
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
   Executing fsck_hfs (version hfs-286.30.1).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
   The volume name is System
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume System appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
executing /sbin/fsck_hfs
** /dev/rdisk0s1s2
   Executing fsck_hfs (version hfs-286.30.1).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
   The volume name is Data
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s2 mounted on /mnt2
entering resize_system_partition_to_options
User specified system partition size, skipping firmware extras size.
Found SystemPartitionPadding value of 272629760 bytes
Erasing system partition prior to resize operation.
block size for /dev/disk0s1s1: 4096
/sbin/newfs_hfs -s -v System -J /dev/disk0s1s1 
executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
   Executing fsck_hfs (version hfs-286.30.1).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
   The volume name is System
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume System appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
Trying to resize system partition to 2380267520 bytes aka 2270 MB
entering adjust_partition_preflight
partition:0 requiredSize=581120
no change in size
Successfully resized the system partition
entering maximize_data_partition
entering adjust_partition_preflight
partition:1 requiredSize=<<<<<IMEI>>>>>>6
maximizing data partition to 13474201599 bytes
entering adjust_partition_preflight
partition:1 requiredSize=3289600
no change in size
Successfully resized data partition to consume free blocks
The system partition now has a total HFS+ capacity of 2270 MB
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log=
entering unmount_filesystems
entering restore_images
Successfully marked device node /dev/rdisk0s1s1 as static data
executing /usr/sbin/asr -sourceSYSLOG: Jan  7 12:02:35 localhost kernel[0] <Notice>: void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
 asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
SYSLOG: Jan  7 12:02:35 localhost asr[27] <Error>: bootstrap_look_up2 failed with 0x44e
ASR: asr: Unable to disable idle sleep - XXXXXXXXX9
ASR STATUS: start	242.6	multicast-client
ASR: Waiting for connection attempt from server
SYSLOG: Jan  7 12:02:35 localhost asr[27] <Error>: __net_helper_get_connection_block_invoke_3 could not connect to networkd
SYSLOG: Jan  7 12:02:45 localhost kernel[0] <Notice>: AppleUSBDeviceMux::handleConnectResult new session 0x8b5a2c08 established 12345<-lo0->49176 12345<-usb->37381
ASR STATUS: setup
ASR: Validating target...done
ASR STATUS: metadata
ASR: Validating source...
ASR: done
ASR: Retrieving scan information...
ASR: done
ASR: Validating sizes...
ASR: done
ASR STATUS: restore
ASR RESTORE PROGRESS: 2%
ASR RESTORE PROGRESS: 4%
ASR RESTORE PROGRESS: 6%
ASR RESTORE PROGRESS: 8%
ASR RESTORE PROGRESS: 10%
ASR RESTORE PROGRESS: 12%
ASR RESTORE PROGRESS: 14%
ASR RESTORE PROGRESS: 16%
ASR RESTORE PROGRESS: 18%
ASR RESTORE PROGRESS: 20%
ASR RESTORE PROGRESS: 22%
ASR RESTORE PROGRESS: 24%
ASR RESTORE PROGRESS: 26%
ASR RESTORE PROGRESS: 28%
ASR RESTORE PROGRESS: 30%
ASR RESTORE PROGRESS: 32%
ASR RESTORE PROGRESS: 34%
ASR RESTORE PROGRESS: 36%
ASR RESTORE PROGRESS: 38%
ASR RESTORE PROGRESS: 40%
ASR RESTORE PROGRESS: 42%
ASR RESTORE PROGRESS: 44%
ASR RESTORE PROGRESS: 46%
ASR RESTORE PROGRESS: 48%
ASR RESTORE PROGRESS: 50%
ASR RESTORE PROGRESS: 52%
ASR RESTORE PROGRESS: 54%
ASR RESTORE PROGRESS: 56%
ASR RESTORE PROGRESS: 58%
ASR RESTORE PROGRESS: 60%
ASR RESTORE PROGRESS: 62%
ASR RESTORE PROGRESS: 64%
ASR RESTORE PROGRESS: 66%
ASR RESTORE PROGRESS: 68%
ASR RESTORE PROGRESS: 70%
ASR RESTORE PROGRESS: 72%
ASR RESTORE PROGRESS: 74%
ASR RESTORE PROGRESS: 76%
ASR RESTORE PROGRESS: 78%
ASR RESTORE PROGRESS: 80%
ASR RESTORE PROGRESS: 82%
ASR RESTORE PROGRESS: 84%
ASR RESTORE PROGRESS: 86%
ASR RESTORE PROGRESS: 88%
ASR RESTORE PROGRESS: 90%
ASR RESTORE PROGRESS: 92%
ASR RESTORE PROGRESS: 94%
ASR RESTORE PROGRESS: 96%
ASR RESTORE PROGRESS: 98%
SYSLOG: Jan  7 12:04:44 localhost asr[27] <Error>: CFPreferences could not connect to its daemon.
	 Preferences using the connection 0x0 will be volatile and will not be persisted to disk.
SYSLOG: Jan  7 12:04:44 localhost asr[27] <Critical>:  securityd_message_with_reply_sync Failed to talk to secd after 4 attempts.
SYSLOG: Jan  7 12:04:44 localhost asr[27] <Critical>:  securityd_message_with_reply_sync Failed to talk to secd after 4 attempts.
SYSLOG: Jan  7 12:04:44 localhost asr[27] <Error>:  SecTrustEvaluate 
SYSLOG: Jan  7 12:04:44 localhost asr[27] <Critical>:  securityd_message_with_reply_sync Failed to talk to secd after 4 attempts.
SYSLOG: Jan  7 12:04:44 localhost kernel[0] <Notice>: AppleUSBDeviceMux::sessionUpcall socket is closed, session 0x8b5a2c08 (12345<-lo0->49176 12345<-usb->37381)
SYSLOG: Jan  7 12:04:44 localhost asr[27] <Critical>:  securityd_message_with_reply_sync Failed to talk to secd after 4 attempts.
SYSLOG: Jan  7 12:04:44 localhost asr[27] <Error>:  SecTrustEvaluate 
ASR RESTORE PROGRESS: 100%
ASR: Copied 2105045504 bytes in 116.99 seconds, 17572.34 KiB/s
ASR STATUS: verify
ASR VERIFY PROGRESS: 2%
ASR VERIFY PROGRESS: 4%
ASR VERIFY PROGRESS: 6%
ASR VERIFY PROGRESS: 8%
ASR VERIFY PROGRESS: 10%
ASR VERIFY PROGRESS: 12%
ASR VERIFY PROGRESS: 14%
ASR VERIFY PROGRESS: 16%
ASR VERIFY PROGRESS: 18%
ASR VERIFY PROGRESS: 20%
ASR VERIFY PROGRESS: 22%
ASR VERIFY PROGRESS: 24%
ASR VERIFY PROGRESS: 26%
ASR VERIFY PROGRESS: 28%
ASR VERIFY PROGRESS: 30%
ASR VERIFY PROGRESS: 32%
ASR VERIFY PROGRESS: 34%
ASR VERIFY PROGRESS: 36%
ASR VERIFY PROGRESS: 38%
ASR VERIFY PROGRESS: 40%
ASR VERIFY PROGRESS: 42%
ASR VERIFY PROGRESS: 44%
ASR VERIFY PROGRESS: 46%
ASR VERIFY PROGRESS: 48%
ASR VERIFY PROGRESS: 50%
ASR VERIFY PROGRESS: 52%
ASR VERIFY PROGRESS: 54%
ASR VERIFY PROGRESS: 56%
ASR VERIFY PROGRESS: 58%
ASR VERIFY PROGRESS: 60%
ASR VERIFY PROGRESS: 62%
ASR VERIFY PROGRESS: 64%
ASR VERIFY PROGRESS: 66%
ASR VERIFY PROGRESS: 68%
ASR VERIFY PROGRESS: 70%
ASR VERIFY PROGRESS: 72%
ASR VERIFY PROGRESS: 74%
ASR VERIFY PROGRESS: 76%
ASR VERIFY PROGRESS: 78%
ASR VERIFY PROGRESS: 80%
ASR VERIFY PROGRESS: 82%
ASR VERIFY PROGRESS: 84%
ASR VERIFY PROGRESS: 86%
ASR VERIFY PROGRESS: 88%
ASR VERIFY PROGRESS: 90%
ASR VERIFY PROGRESS: 92%
ASR VERIFY PROGRESS: 94%
ASR VERIFY PROGRESS: 96%
ASR VERIFY PROGRESS: 98%
ASR VERIFY PROGRESS: 100%
ASR: Verified SHA-1 checksum 2105045504 bytes in 30.09 seconds, 68328.40 KiB/s
ASR STATUS: finish
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log=
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
   Executing fsck_hfs (version hfs-286.30.1).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
   The volume name is Copper12H143.N94OS
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Copper12H143.N94OS appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
executing /sbin/fsck_hfs
** /dev/rdisk0s1s2
   Executing fsck_hfs (version hfs-286.30.1).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
   The volume name is Data
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s2 mounted on /mnt2
RestoredFDRRestoreSavedData success
entering install_kernel_cache
writing kernelcache to /mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
entering install_secure_vault_daemon
entering get_hardware_platform
platform-name = s5l8940x
linking /mnt1/usr/sbin/securekeyvaultd to /mnt1/usr/sbin/securekeyvaultd.s5l8940x
no securekeyvaultd for s5l8940x
entering ramrod_ticket_write
writing ticket to /mnt1/System/Library/Caches/apticket.der
entering RestoredFDRRecover
entering update_device_firmware
entering add_baseband_partition_options
entering ramrod_update_device_firmware
entering update_iBoot
found 'AppleImage3NORAccess' object in IORegistry
entering update_iBoot_image3_NOR_access
write_image3_data: flashing illb data (length = 0x24a1a)
SYSLOG: Jan  7 12:05:58 localhost kernel[0] <Notice>: AppleImage3NORAccess::_getSuperBlock imageVersion: 3
SYSLOG: Jan  7 12:05:58 localhost kernel[0] <Notice>: AppleImage3NORAccess::_getSuperBlock imageVersion: 3
write_image3_data: flashing SCAB data (length = 0xb00)
ticket updated
write_image3_data: flashing ibot data (length = 0x4518c)
write_image3_data: flashing bat1 data (length = 0x80c)
write_image3_data: flashing dtre data (length = 0x142cc)
write_image3_data: flashing glyP data (length = 0x2e4c)
write_image3_data: flashing bat0 data (length = 0xaa4c)
write_image3_data: flashing chg0 data (length = 0x260c)
write_image3_data: flashing batF data (length = 0x1484c)
write_image3_data: flashing chg1 data (length = 0x88cc)
write_image3_data: flashing logo data (length = 0x1a8c)
write_image3_data: flashing recm data (length = 0x12ecc)
SYSLOG: Jan  7 12:05:58 localhost kernel[0] <Notice>: [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
SYSLOG: Jan  7 12:06:01 localhost kernel[0] <Notice>: [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
SYSLOG: Jan  7 12:06:01 localhost kernel[0] <Notice>: [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
entering update_gas_gauge
entering update_ir_mcu
looking for mcu nub...no entry from path!
TiSerialFlasher not supported on this platform. Exiting.
entering update_baseband
update_baseband: registering for progress notifications
create_baseband_update_options: Got imeisv: 19
baseband updater options = <CFBasicHash 0x14521880 [0x5a28b0]>{type = mutable dict, count = 7,
entries =>
	0 : <CFString 0xd0ee68 [0x5a28b0]>{contents = "SystemRoot"} = <CFString 0x14520570 [0x5a28b0]>{contents = "/mnt1"}
	5 : <CFString 0xd0edf8 [0x5a28b0]>{contents = "DisallowFusiing"} = <CFBoolean 0x5a2ab0 [0x5a28b0]>{value = true}
	6 : <CFString 0xd0ef78 [0x5a28b0]>{contents = "autoSetupEnv"} = <CFBoolean 0x5a2ab8 [0x5a28b0]>{value = false}
	7 : <CFString 0xd0ee78 [0x5a28b0]>{contents = "DataRoot"} = <CFString 0x14521040 [0x5a28b0]>{contents = "/mnt2"}
	8 : <CFString 0xd0edc8 [0x5a28b0]>{contents = "forceUpdate"} = <CFBoolean 0x5a2ab0 [0x5a28b0]>{value = true}
	9 : <CFString 0xd0ef88 [0x5a28b0]>{contents = "disablePing"} = <CFBoolean 0x5a2ab0 [0x5a28b0]>{value = true}
	10 : <CFString 0xd0eee8 [0x5a28b0]>{contents = "IMEISwVersion"} = <CFNumber 0x14521860 [0x5a28b0]>{value = +19, type = kCFNumberSInt32Type}
}
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: 	BEGIN: Preparing first stage
bbupdater: 		Requested boot mode:  kBBUBootModeNone
bbupdater: 		Creating transport, attempts remaining 5...bbupdater: 		OK
bbupdater: 	END: Preparing first stage
bbupdater: 	Connecting to Loader...bbupdater: 	OK
bbupdater: 	Getting Version...bbupdater: 	OK
bbupdater: 	Loader version: PBL-DownloaderVER1.0
bbupdater: 	Fusing disallowed, will treat as fused
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 5,
entries =>
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x14524c80 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (123865 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: 	Loading...
bbupdater: 	0x2001a100 of 0x2002ff28 (26 percent)
bbupdater: 	0x20022200 of 0x2002ff28 (53 percent)
bbupdater: 	0x2002a300 of 0x2002ff28 (80 percent)
bbupdater: 	0x2002ff28 of 0x2002ff28 (100 percent)
bbupdater: 
bbupdater: 	Launching...bbupdater: 	OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: 	BEGIN: Preparing Second stage
bbupdater: 		Creating transport, attempts remaining 0...bbupdater: 		OK
bbupdater: 	END: Preparing Second stage
bbupdater: 	BEGIN: Gathering Personalization parameters...
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello response boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Starting Maverick Protocol
bbupdater: 		Sending Erase Response: Length 12 Type 161  Erase EFS 0
bbupdater: 		Checking Manifest Request: Length 40 Type 162
bbupdater: 		   NONCE: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: 		   SNUM: 0x244235BD
bbupdater: 		   CertID: 2
bbupdater: 		   CHIPID: 0x005a00e1
bbupdater: 	END: Gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 6,
entries =>
	0 : <CFString 0xd0f018 [0x5a28b0]>{contents = "Nonce"} = <CFData 0x145255c0 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x145253a0 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11259495 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: 	BEGIN: Sending 1 Images
bbupdater: 		Resuming Maverick Protocol
bbupdater: 		Sent Manifest with length 586
bbupdater: 			 DBL_HASH:  <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: 			 OSBL_HASH:  <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: 			 AMSS_HASH:  <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
bbupdater: 		Sending Hash Response: value 1  success 1
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 	END: Sending 1 Images
bbupdater: 	Saving image to /mnt1/usr/local/standalone/firmware/Baseband/Trek
bbupdater: 	BEGIN: Preparing Initial stage
bbupdater: 		Requested boot mode:  kBBUBootModeNone
bbupdater: 		Creating transport, attempts remaining 5...bbupdater: 		OK
bbupdater: 	END: Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: 	BEGIN: Preparing first stage
bbupdater: 	END: Preparing first stage
bbupdater: 	Connecting to Loader...bbupdater: 	OK
bbupdater: 	Getting Version...bbupdater: 	OK
bbupdater: 	Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 6,
entries =>
	0 : <CFString 0xd0f018 [0x5a28b0]>{contents = "Nonce"} = <CFData 0x145255c0 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x14521930 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11259495 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: 	Loading...
bbupdater: 	0x2001a100 of 0x20030034 (26 percent)
bbupdater: 	0x20022200 of 0x20030034 (53 percent)
bbupdater: 	0x2002a300 of 0x20030034 (80 percent)
bbupdater: 	0x20030034 of 0x20030034 (100 percent)
bbupdater: 
bbupdater: 	Launching...bbupdater: 	OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: 	BEGIN: Preparing Second stage
bbupdater: 		Creating transport, attempts remaining 0...bbupdater: 		OK
bbupdater: 	END: Preparing Second stage
bbupdater: 	Not in restore mode - skipping gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 6,
entries =>
	0 : <CFString 0xd0f018 [0x5a28b0]>{contents = "Nonce"} = <CFData 0x145255c0 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x14521930 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11259495 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: 	BEGIN: Sending 1 Images
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello response boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Starting Maverick Protocol
bbupdater: 		Sending Erase Response: Length 12 Type 161  Erase EFS 0
bbupdater: 		Checking Manifest Request: Length 40 Type 162
bbupdater: 		Sent Manifest with length 586
bbupdater: 		Sending Hash Response: value 1  success 1
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModePending
bbupdater: 		Hello response boot mode:  ETLSAHModePending
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Sending Image 'OSBL'...
bbupdater: 	0x6e050 of 0x6e050 (100 percent)
bbupdater: 
bbupdater: 		Took 0.044305 seconds
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeComplete
bbupdater: 		Hello response boot mode:  ETLSAHModeComplete
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Sending Image 'ELF'...
bbupdater: 	0x32000 of 0x12db000 (1 percent)
bbupdater: 	0x680d8 of 0x12db000 (2 percent)
bbupdater: 	0x885000 of 0x12db000 (45 percent)
bbupdater: 	0x1085000 of 0x12db000 (87 percent)
bbupdater: 	0x11b6000 of 0x12db000 (93 percent)
bbupdater: 	0x11ba000 of 0x12db000 (94 percent)
bbupdater: 	0x12cc000 of 0x12db000 (99 percent)
bbupdater: 	0x12db000 of 0x12db000 (100 percent)
bbupdater: 
bbupdater: 		Took 1.866526 seconds
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 	END: Sending 1 Images
bbupdater: 	Waiting 0 seconds...bbupdater: 	OK
bbupdater: 	BEGIN: Preparing Initial stage
bbupdater: 		Requested boot mode:  kBBUBootModeNone
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 3
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 2
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 1
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 0
bbupdater: 		Attempting to boot up once more before triggering EFS erase
bbupdater: 		Forcing into first stage
bbupdater: 		powercycling modem 
bbupdater: 	END(kBBUReturnTryAgain): Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: 	BEGIN: Preparing first stage
bbupdater: 	END: Preparing first stage
bbupdater: 	Connecting to Loader...bbupdater: 	OK
bbupdater: 	Getting Version...bbupdater: 	OK
bbupdater: 	Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 6,
entries =>
	0 : <CFString 0xd0f018 [0x5a28b0]>{contents = "Nonce"} = <CFData 0x145255c0 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x146160d0 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11259495 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: 	Loading...
bbupdater: 	0x2001a100 of 0x20030034 (26 percent)
bbupdater: 	0x20022200 of 0x20030034 (53 percent)
bbupdater: 	0x2002a300 of 0x20030034 (80 percent)
bbupdater: 	0x20030034 of 0x20030034 (100 percent)
bbupdater: 
bbupdater: 	Launching...bbupdater: 	OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: 	BEGIN: Preparing Second stage
bbupdater: 		Creating transport, attempts remaining 0...bbupdater: 		OK
bbupdater: 	END: Preparing Second stage
bbupdater: 	Not in restore mode - skipping gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 6,
entries =>
	0 : <CFString 0xd0f018 [0x5a28b0]>{contents = "Nonce"} = <CFData 0x145255c0 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x146160d0 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11259495 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: 	BEGIN: Sending 1 Images
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello response boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Starting Maverick Protocol
bbupdater: 		Sending Erase Response: Length 12 Type 161  Erase EFS 0
bbupdater: 		Checking Manifest Request: Length 40 Type 162
bbupdater: 		Sent Manifest with length 586
bbupdater: 		Sending Hash Response: value 1  success 1
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModePending
bbupdater: 		Hello response boot mode:  ETLSAHModePending
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Sending Image 'OSBL'...
bbupdater: 	0x6e050 of 0x6e050 (100 percent)
bbupdater: 
bbupdater: 		Took 0.043785 seconds
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeComplete
bbupdater: 		Hello response boot mode:  ETLSAHModeComplete
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Sending Image 'ELF'...
bbupdater: 	0x32000 of 0x12db000 (1 percent)
bbupdater: 	0x680d8 of 0x12db000 (2 percent)
bbupdater: 	0x885000 of 0x12db000 (45 percent)
bbupdater: 	0x1085000 of 0x12db000 (87 percent)
bbupdater: 	0x11b6000 of 0x12db000 (93 percent)
bbupdater: 	0x11ba000 of 0x12db000 (94 percent)
bbupdater: 	0x12cc000 of 0x12db000 (99 percent)
bbupdater: 	0x12db000 of 0x12db000 (100 percent)
bbupdater: 
bbupdater: 		Took 1.873251 seconds
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 	END: Sending 1 Images
bbupdater: 	Waiting 0 seconds...bbupdater: 	OK
bbupdater: 	BEGIN: Preparing Initial stage
bbupdater: 		Requested boot mode:  kBBUBootModeNone
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 3
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 2
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 1
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 0
bbupdater: 		Attempting to erase EFS and restarting the update process
bbupdater: 		Forcing into first stage
bbupdater: 		powercycling modem 
bbupdater: 	END(kBBUReturnTryAgain): Preparing Initial stage
bbupdater: END: Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage first
bbupdater: 	BEGIN: Preparing first stage
bbupdater: 	END: Preparing first stage
bbupdater: 	Connecting to Loader...bbupdater: 	OK
bbupdater: 	Getting Version...bbupdater: 	OK
bbupdater: 	Loader version: PBL-DownloaderVER1.0
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 6,
entries =>
	0 : <CFString 0xd0f018 [0x5a28b0]>{contents = "Nonce"} = <CFData 0x145255c0 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x14525e20 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11259495 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: 	Loading...
bbupdater: 	0x2001a100 of 0x20030034 (26 percent)
bbupdater: 	0x20022200 of 0x20030034 (53 percent)
bbupdater: 	0x2002a300 of 0x20030034 (80 percent)
bbupdater: 	0x20030034 of 0x20030034 (100 percent)
bbupdater: 
bbupdater: 	Launching...bbupdater: 	OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: 	BEGIN: Preparing Second stage
bbupdater: 		Creating transport, attempts remaining 0...bbupdater: 		OK
bbupdater: 	END: Preparing Second stage
bbupdater: 	Not in restore mode - skipping gathering Personalization parameters...
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x14524b30 [0x5a28b0]>{type = mutable dict, count = 6,
entries =>
	0 : <CFString 0xd0f018 [0x5a28b0]>{contents = "Nonce"} = <CFData 0x145255c0 [0x5a28b0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
	2 : <CFString 0xd0f188 [0x5a28b0]>{contents = "VendorID"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	3 : <CFString 0xd0efd8 [0x5a28b0]>{contents = "ChipID"} = <CFNumber 0x14525e20 [0x5a28b0]>{value = +5898465, type = kCFNumberSInt64Type}
	4 : <CFString 0xd0f1d8 [0x5a28b0]>{contents = "FusingStatus"} = <CFNumber 0x14611d30 [0x5a28b0]>{value = +3, type = kCFNumberSInt32Type}
	5 : <CFString 0xd0f178 [0x5a28b0]>{contents = "CertID"} = <CFNumber 0x146119c0 [0x5a28b0]>{value = +2, type = kCFNumberSInt32Type}
	6 : <CFString 0xd0efc8 [0x5a28b0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
}
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11259495 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: 	BEGIN: Sending 1 Images
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello response boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Starting Maverick Protocol
bbupdater: 		Sending Erase Response: Length 12 Type 161  Erase EFS 1
bbupdater: 		Checking Manifest Request: Length 40 Type 162
bbupdater: 		Sent Manifest with length 586
bbupdater: 		Sending Hash Response: value 1  success 1
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModePending
bbupdater: 		Hello response boot mode:  ETLSAHModePending
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Sending Image 'OSBL'...
bbupdater: 	0x6e050 of 0x6e050 (100 percent)
bbupdater: 
bbupdater: 		Took 0.044790 seconds
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeComplete
bbupdater: 		Hello response boot mode:  ETLSAHModeComplete
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Sending Image 'ELF'...
bbupdater: 	0x32000 of 0x12db000 (1 percent)
bbupdater: 	0x680d8 of 0x12db000 (2 percent)
bbupdater: 	0x885000 of 0x12db000 (45 percent)
bbupdater: 	0x1085000 of 0x12db000 (87 percent)
bbupdater: 	0x11b6000 of 0x12db000 (93 percent)
bbupdater: 	0x11ba000 of 0x12db000 (94 percent)
bbupdater: 	0x12cc000 of 0x12db000 (99 percent)
bbupdater: 	0x12db000 of 0x12db000 (100 percent)
bbupdater: 
bbupdater: 		Took 1.870389 seconds
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 	END: Sending 1 Images
bbupdater: 	Waiting 0 seconds...bbupdater: 	OK
bbupdater: 	BEGIN: Preparing Initial stage
bbupdater: 		Requested boot mode:  kBBUBootModeNone
bbupdater: 		Adding 60.000000 seconds in timeout for EFS erase
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 3
bbupdater: 		Adding 60.000000 seconds in timeout for EFS erase
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 2
bbupdater: 		Adding 60.000000 seconds in timeout for EFS erase
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 1
bbupdater: 		Adding 60.000000 seconds in timeout for EFS erase
bbupdater: 		Creating transport, attempts remaining 3...bbupdater: 		OK
bbupdater: 		Modem not booting, crashed?
bbupdater: 		Modem not booting, attempts 0
bbupdater: 	END(kBBUReturnResetToPBL): Preparing Initial stage
bbupdater: 	Adding 60.000000 seconds in timeout for EFS erase
bbupdater: 	Creating transport, attempts remaining 5...bbupdater: 	OK
bbupdater: 	Requested boot mode:  kBBUBootModeCoreDump
bbupdater: 	BEGIN: Preparing first stage
bbupdater: 		Overriding boot mode with default kBBUBootModeCoreDump
bbupdater: 		Requested boot mode:  kBBUBootModeCoreDump
bbupdater: 		Creating transport, attempts remaining 5...bbupdater: 		OK
bbupdater: 	END: Preparing first stage
bbupdater: 	Connecting to Loader...bbupdater: 	OK
bbupdater: 	Getting Version...bbupdater: 	OK
bbupdater: 	Loader version: PBL-DownloaderVER1.0
bbupdater: 	Loading...
bbupdater: 	0x2001a100 of 0x20030034 (26 percent)
bbupdater: 	0x20022200 of 0x20030034 (53 percent)
bbupdater: 	0x2002a300 of 0x20030034 (80 percent)
bbupdater: 	0x20030034 of 0x20030034 (100 percent)
bbupdater: 
bbupdater: 	Launching...bbupdater: 	OK
bbupdater: 	BEGIN: Preparing Second stage
bbupdater: 		Creating transport, attempts remaining 0...bbupdater: 		OK
bbupdater: 	END: Preparing Second stage
bbupdater: 	Overriding boot mode with default kBBUBootModeCoreDump
bbupdater: 	BEGIN: Sending 1 Images
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello response boot mode:  ETLSAHModeMaverick
bbupdater: 		Hello reserved fields:  02
bbupdater: 		Starting Maverick Protocol
bbupdater: 		Sending Erase Response: Length 12 Type 161  Erase EFS 0
bbupdater: 		Checking Manifest Request: Length 40 Type 162
bbupdater: 		Sent Manifest with length 586
bbupdater: 		Sending Hash Response: value 1  success 1
bbupdater: 		Disconnecting...bbupdater: 		OK
bbupdater: 		Waiting for Hello...bbupdater: 		OK
bbupdater: 		Hello received boot mode:  ETLSAHModeMemoryDebug
bbupdater: 		Hello response boot mode:  ETLSAHModeMemoryDebug
bbupdater: 		Hello reserved fields:  02
bbupdater: 	END(kBBUReturnBootedForCoreDump): Sending 1 Images
bbupdater: 	collecting dump at /mnt2//baseband_updater_logs
bbupdater: 	BEGIN: Collecting core dump...
bbupdater: 		Failed to get debug table
bbupdater: 	END(kBBUReturnIOError): Collecting core dump...
bbupdater: 	failed collecting core dumps
bbupdater: END(kBBUReturnResetToPBL): Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: calling CFNotificationCenterRemoveEveryObserver
update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 48 - Modem returned to download mode)
Update[Baseband] error - The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
Update[Baseband] failed - 0 retries remaining...
0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
1: BBUpdater/30: Modem returned to download mode
unable to convert ramrod error 1004
rt ramrod error 1004

==== end of device restore output ====
04.07.15 22:58:19,961 iTunes[77493]: tid:20367 - <Restore Device 0x61000073f400>: Restore failed (result = -1)
04.07.15 22:58:19,962 iTunes[77493]: AMRestorePerformRestoreModeRestoreWithError failed with error: -1
04.07.15 22:58:19,962 iTunes[77493]: tid:20367 - State Machine Dump, status:ERROR - [state:Recovery remaining-cycles:0] -> [state:RestoreOS remaining-cycles:0 (current state)]
04.07.15 22:58:21,624 iTunes[77493]: tid:20367 - State is now set to error
04.07.15 22:58:21,624 iTunes[77493]: tid:20367 - Can't stop watching device log we're not watching
04.07.15 22:58:21,625 iTunes[77493]: tid:20367 - amai: AMAuthInstallPlatformRemoveDirectory: failed to remove directory: No such file or directory
04.07.15 22:58:21,625 iTunes[77493]: tid:20367 - Failed to remove directory file:///tmp/PersonalizedBundle_8F3B3D0C-75EB-4E5F-A188-B452647BA85F
04.07.15 22:58:21,749 iTunes[77493]: tid:1e463 - iTunes: Restore error 48