libHPDMC SDRAM initialization runtime
(c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3.
Version 1.0

Initialization sequence completed.
Autocalibration OK, testing memory...
All SDRAM initialization completed, boot continuing.

VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0
VGA: DDC I2C bus initialized
VGA: mode set to 640x480

MILKYMIST(tm) v1.0 BIOS   http://www.milkymist.org
(c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, version 3 of the License.

I: BIOS CRC passed (86e23684)
BRD: SoC 1.0 on Milkymist One (PCB revision 2)
BRD: Mem. card : Yes
BRD: AC'97     : Yes
BRD: PFPU      : Yes
BRD: TMU       : Yes
BRD: Ethernet  : Yes
BRD: FML meter : Yes
BRD: Video in  : Yes
BRD: MIDI      : Yes
BRD: DMX       : Yes
BRD: IR        : Yes
BRD: USB       : Yes
BRD: Memtester : No
TMU: texture mapping unit initialized
USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
UKB: USB keyboard connected to console
I: Displaying splash screen...USB: HC: Low speed device on port A
USB: HC: Low speed device on port B
OK
I: MAC address: 10:e2:d5:00:00:30
I: Press Q or ESC to abort boot
I: Aborted boot on user request
BIOS> USB: HC: VID: 0E6A, PID: 6001
USB: HC: VID: 093A, PID: 2510
USB: HC: Found keyboard
USB: HC: Found mouse
serialboot
I: Attempting serial firmware loading
sL5DdSMmkekro
[FLTERM] Received firmware download request from the device.
[FLTERM] Uploading kernel (60368 bytes)...
[FLTERM] Upload complete (9.9KB/s).
[FLTERM] Booting the device.
[FLTERM] Done.
*** Milkymist One automated tests starting...

Select a test category below, or hit ENTER to run all tests:
a: SDRAM
b: GPIO
c: VGA
d: Memory card
e: Audio
f: Ethernet
g: Video input
h: MIDI
i: DMX512
j: Infrared
k: USB
*** Running tests in category: SDRAM
A8:                                                                      [  PASSED  ]
A9:                                                                      [  PASSED  ]
A10:                                                                     [  PASSED  ]
A11:                                                                     [  PASSED  ]
A12:                                                                     [  PASSED  ]
Random pattern:                                                          [  PASSED  ]
Hammer pattern:                                                          [  PASSED  ]
Crosstalk pattern:                                                       [  PASSED  ]

*** Running tests in category: GPIO
SW1:
Press the button. f to fail test, s to skip.                             [  PASSED  ]
SW2:
Press the button. f to fail test, s to skip.                             [  PASSED  ]
SW3:
Press the button. f to fail test, s to skip.                             [  PASSED  ]
LED2:
Is the LED on? (y/n/s)                                                   [  PASSED  ]
LED3:
Is the LED on? (y/n/s)                                                   [  PASSED  ]

*** Running tests in category: VGA
DDC:                                                                     [  PASSED  ]
Test card:
Is the picture OK? (y/n/s)                                               [  PASSED  ]

*** Running tests in category: Memory card
Card initialization:                                                     [  PASSED  ]
Block read:                                                              [  PASSED  ]

*** Running tests in category: Audio
Codec probe:                                                             [  PASSED  ]
Line and headphones outputs:
Is the test tone OK? (y/n/s/r)                                           [  PASSED  ]
Microphone:
Recording...Playing...
Is the audio played back? (y/n/s/r)                                      [  PASSED  ]
Line input:
Recording...Playing...
Is the audio played back? (y/n/s/r)                                      [  PASSED  ]

*** Running tests in category: Ethernet
MDIO:                                                                    [  PASSED  ]
ARP resolution:                                                          [  PASSED  ]

*** Running tests in category: Video input
Decoder probe:
VIN: I2C bus initialized                                                 [  PASSED  ]
Capture:
Press a key to start capturing
Waiting for a captured frame. f to fail test, s to skip.
LOCKS: 7
AD_RESULT: 4
Is the picture OK? (y/n)                                                 [  PASSED  ]

*** Running tests in category: MIDI
Loopback:                                                                [  FAILED  ]

*** Running tests in category: DMX512
Loopback:                                                                [  PASSED  ]

*** Running tests in category: Infrared
RC5 reception:
Press the remote's [1] [3] [5], one by one
Waiting for remote. e for exit
  should be [0x01], get [0x01], [0x19c1].
[1] passed
  should be [0x03], get [0x03], [0x11c3].
[3] passed
  should be [0x05], get [0x03], [0x11c3].
  should be [0x05], get [0x05], [0x19c5].
[5] passed                                                               [  PASSED  ]

*** Running tests in category: USB
Port A:
USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
Press ENTER at the USB keyboard or press the left mouse button...
USB: HC: Low speed device on port A
USB: HC: Low speed device on port B
USB: HC: VID: 0E6A, PID: 6001
USB: HC: VID: 093A, PID: 2510
USB: HC: Found keyboard
USB: HC: Found mouse                                                     [  PASSED  ]
Port B:
Press ENTER at the USB keyboard or press the left mouse button...        [  PASSED  ]

******** TEST SUMMARY ********
Failed tests:
  - MIDI/Loopback

Skipped tests: 0
Failed tests:  1
Passed tests:  29
Total tests:   30

******** SOME TESTS FAILED ********