29.06.15 3:41:20,130 iTunes[6888]: tid:16e0b - dumping CFError returned by restored: 29.06.15 3:41:20,130 iTunes[6888]: tid:16e0b - CFError domain:AMRestoreErrorDomain code:-1 description:failed to update device firmware 29.06.15 3:41:20,131 iTunes[6888]: tid:16e0b - CFError domain:AMRestoreErrorDomain code:-1 description:ramrod firmware update failed 29.06.15 3:41:20,131 iTunes[6888]: tid:16e0b - CFError domain:RamrodErrorDomain code:1004 description:update_baseband: failed to perform next stage 29.06.15 3:41:20,131 iTunes[6888]: tid:16e0b - CFError domain:BBUpdater code:48 description:Modem returned to download mode 29.06.15 3:41:20,146 iTunes[6888]: tid:16e0b - regex matching failed for '[0-9a-fA-F]{40}': 0 29.06.15 3:41:20,182 iTunes[6888]: tid:16e0b - regex matching failed for '[0-9a-fA-F]{40}': 0 29.06.15 3:41:20,186 iTunes[6888]: tid:16e0b - regex matching failed for '[0-9a-fA-F]{40}': 0 29.06.15 3:41:20,186 iTunes[6888]: tid:16e0b - regex matching failed for '[0-9a-fA-F]{40}': 0 29.06.15 3:41:20,186 iTunes[6888]: tid:16e0b - regex matching failed for '[0-9a-fA-F]{40}': 0 29.06.15 3:41:20,847 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:20,850 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:20,854 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:20,856 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:20,863 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:20,866 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:20,872 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:20,875 iTunes[6888]: tid:16e0b - regex matching failed for '"ChipSerialNo"[^ ]*bytes = 0x[0-9a-fA-F]*}': 0 29.06.15 3:41:21,011 iTunes[6888]: tid:16e0b - regex matching failed for '([0-9a-fA-F][0-9a-fA-F]:){5}([0-9a-fA-F][0-9a-fA-F])': 0 29.06.15 3:41:21,438 iTunes[6888]: tid:16e0b - ==== device restore output ==== m' BSD root: md0, major 2, minor 0 ApplePinotLCD: _lcdPanelID: 0xaa8a05c8 _lcdPanelClass: 2 [nand_part_core:INF@ 157] published partition 4 [nand_part_core:INF@ 145] created partition 5 as 'System Config' [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data' [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table' [nand_part_core:INF@ 157] published partition 7 com.apple.AppleFSCompressionTypeZlib kmod start AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0x8441d000) AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x84426000) AppleSwissPPNFTL started with IOFlashStoragePartition provider [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1 com.apple.AppleFSCompressionTypeZlib load succeeded AppleBaseband: Found 0 backpowering pins L2TP domain init L2TP domain init complete PPTP domain init virtual bool AppleH4DisplayPipe::start_hardware(IOService *), auto-detect chip Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0 Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0 Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0 Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0 AppleH4CamIn::start - back camera expected AppleH4CamIn::start - front camera expected AppleH4CamIn::power_off_hardware AppleD1881PMUPowerSource: Setting battery threshold for PMU buck control to 4000 mV AppleH4CamIn:XXXXXXXXXXXXXXXXXXX: 0 Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0 Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0 Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0 Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0 AppleRGBOUT: TVOUT device is detected virtual bool AppleH4DisplayPipe::start_hardware(IOService *), auto-detect chip AppleNANDFTL registered[HPark] GammaCoreIP::start: 0xc5d4a800, highland-park mIISNub: 0x8788a180, sampleRate = 44100, ol=7, oi=7 void AppleDisplayPipe::setupVideoDownscalingLimits() called on secondary display with no timing settings! AppleMultitouchN1SPI: successfully started [NAND] start:356 this 0x878a1000 PROVIDER=0x876bb580 flashMedia=0x876bb580 [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write [NAND] WMR_Start:174 FIL_Init [OK] [HPark] GammaCoreIP::setPowerState() function called whereas Start() is not finished [HPark] GammaCoreIP ATSc values: [ mic1: 0x00000008, mic2: 0x0000fffd, mic3: 0x00000000, recv: 0x0000ffff, spk: 0x00000000 ] [NAND] WMR_Open:371 VFL_Open [OK] AppleARMPMUCharger: AppleUSBCableDetect 1 AppleARMPMUCharger: AppleUSBCableType USBHost AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet AppleMultitouchN1SPI: detected HBPP. driver will be kept alive AppleBCMWLANCore::init IO80211-154.5 Mar 29 2015 19:44:18 000827.347121 wlan0.A[0] AppleBCMWLANProvisioningManager::gatherDeviceTreeData(): WARNING, Wifi 'serial baud rate' does not exist in the device tree 000827.351283 wlan0.A[1] AppleBCMWLANConfigManager::gatherParameterData(): no provisioned roam profiles. Using default. 000827.352677 wlan0.N[2] AppleBCMWLANCore::start(): Starting with MAC Address: <<>> 000827.354565 wlan0.N[3] AppleBCMWLANCore:XXXXXXXXXXXXXXXXXXX(): powerState 1, fStateFlags 0x20, dev 0xc5fcb800 (this 1, provider 0) 000827.354603 wlan0.N[4] AppleBCMWLANCore:XXXXXXXXXXXXXXXXXXX(): Received power state change before driver has initialized, ignoring IO80211PeerManager::initWithInterface can't add monitoring timer IO80211Interface::init peerManager=0x88f2d800 000827.358170 wlan0.N[5] AppleBCMWLANCore::populateRequestedFiles(): No module-instance property defined AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet display-scale = 2 display-rotation = 0 found applelogo at /usr/share/progressui/applelogo@2x.tga found display: primary display: 640 x 960 [NAND] WMR_Open:420 FTL_Open [OK] [NAND] _publishServices:642 FTL capabilities: 0x00000001 [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 44 max_count: 44 [NAND] _fetchBorrowedList:881 number of borrowed blocks 37 [nand_part_core:INF@ 157] published partition 0 [nand_part_core:INF@ 157] published partition 1 [nand_part_core:INF@ 157] published partition 2 [nand_part_core:INF@ 157] published partition 3 [nand_part_core:INF@ 157] published partition 5 [nand_part_core:INF@ 157] published partition 6 Loading syscfg. waiting for matching IOKit service: {type = mutable dict, count = 1, entries => 2 : {contents = "IOProviderClass"} = {contents = "AppleUSBDeviceMux"} } AppleSynopsysOTGDevice - Configuration: Apple Mobile Device AppleSynopsysOTGDevice Interface: AppleUSBMux virtual bool AppleUSBDeviceMux::start(IOService *) build: Mar 29 2015 19:37:06 AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux AppleSynopsysOTGDevice::startUSBStack Starting usb stack [effaceable:INIT] found current generation, 290, in group 1 [effaceable:INIT] started [effaceable:INIT] started AppleARMBacklight::start: No AAP function IOReturn AppleUSBDeviceMux:XXXXXXXXXXXXXXXXXXX(OSObject *) setting debug level to 7 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d2c0 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d2c0 established 62078<-lo0->49153 62078<-usb->30976 AppleUSBDeviceMux::handleConnectResult new session 0x89e3d268 established 62078<-lo0->49154 62078<-usb->31232 AppleUSBDeviceMux::handleConnectResult new session 0x89e3d210 established 62078<-lo0->49155 62078<-usb->31488 AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49156 62078<-usb->31744 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d2c0 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d268 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message recv(13, 4) failed: connection closed unable to read message size: -1 could not receive message void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d210 recv(14, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d210 established 62078<-lo0->49157 62078<-usb->32000 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d210 AppleUSBDeviceMux::handleConnectResult new session 0x89e3d210 established 62078<-lo0->49158 62078<-usb->32256 AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49159 62078<-usb->32512 recv(15, 4) failed: connection closed recv(12, 4) failed: connection closed unable to read message size: -1 unable to read message size: -1 could not receive message could not receive message void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(14, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49160 62078<-usb->32768 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49161 62078<-usb->33024 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49162 62078<-usb->33280 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49163 62078<-usb->33536 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49164 62078<-usb->33792 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49165 62078<-usb->34048 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49166 62078<-usb->34304 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49167 62078<-usb->34560 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49168 62078<-usb->34816 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49169 62078<-usb->35072 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49170 62078<-usb->35328 unrecognized key 'BootArgs' in value query failed to handle value query for key 'BootArgs', sending back empty response void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49171 62078<-usb->35584 unrecognized key 'MarketingPartNumber' in value query failed to handle value query for key 'MarketingPartNumber', sending back empty response void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message AppleUSBDeviceMux::handleConnectResult new session 0x89e3d1b8 established 62078<-lo0->49172 62078<-usb->35840 void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x89e3d1b8 recv(12, 4) failed: connection closed unable to read message size: -1 could not receive message void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61 void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61 client protocol version 13 *** UUID FC657A6A-1493-4A77-A111-E4922D741F71 *** Restore options: UUID => {contents = "FC657A6A-1493-4A77-A111-E4922D741F71"} MinimumSystemPartition => {value = +1995, type = kCFNumberSInt64Type} SystemPartitionSize => {value = +1995, type = kCFNumberSInt64Type} SystemPartitionPadding => {type = mutable dict, count = 9, entries => 0 : {contents = "512"} = {value = +1280, type = kCFNumberSInt64Type} 2 : {contents = "128"} = {value = +1280, type = kCFNumberSInt64Type} 3 : {contents = "16"} = {value = +260, type = kCFNumberSInt64Type} 4 : {contents = "32"} = {value = +320, type = kCFNumberSInt64Type} 5 : {contents = "768"} = {value = +1280, type = kCFNumberSInt64Type} 6 : {contents = "8"} = {value = +180, type = kCFNumberSInt64Type} 7 : {contents = "1024"} = {value = +1280, type = kCFNumberSInt64Type} 8 : {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} ticket_hash: <<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>> received valid ticket (2738 bytes) entering partition_nand_device device supports boot-from-NAND nand device is already partitioned entering wait_for_storage_device Searching for NAND service Found NAND service: IOFlashStoragePartition NAND initialized. Waiting for devnode. entering clear_remap_variable executing /usr/sbin/nvram entering ramrod_probe_media device partitioning scheme is GPT find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log= executing /sbin/fsck_hfs ** /dev/rdisk0s1s1 Executing fsck_hfs (version hfs-285). ** Checking Journaled HFS Plus volume. ** Detected a case-sensitive volume. The volume name is Stowe12F70.N94OS ** Checking extents overflow file. ** Checking catalog file. ** Checking multi-linked files. ** Checking catalog hierarchy. ** Checking extended attributes file. ** Checking volume bitmap. ** Checking volume information. ** Trimming unused blocks. ** The volume Stowe12F70.N94OS appears to be OK. executing /sbin/mount_hfs mount_hfs: Could not create property for re-key environment check: No such file or directory /dev/disk0s1s1 mounted on /mnt1 AMSupportPlatformCreateBufferFromNativeFilePath: open failed: No such file or directory __getFDRSealingMap_block_invoke: Could not load sealing map from '/usr/lib/FDRSealingMap.plist' AMFDRSealingMapGetEntriesForDevice: Could not load sealing map restored_fdr_initialize returned false RestoredFDRCreate() returned 0 FDR is not supported on this device RestoredFDRSaveData: restoredFDR is NULL, not able to preserve FDR data. RestoredFDRSaveData success entering check_for_restore_log found restore log (size = 58025) entering unmount_filesystems error unmounting '/mnt2': Invalid argument create_baseband_update_options: Got imeisv: 18 baseband updater options = {type = mutable dict, count = 3, entries => 0 : {contents = "IMEISwVersion"} = {value = +18, type = kCFNumberSInt32Type} 1 : {contents = "autoSetupEnv"} = {value = false} 2 : {contents = "disablePing"} = {value = true} } _baseband_update_requires_filesystems_once: querying baseband to determine if it requires system filesystem bbupdater: cmdCopyRequirePartitionMount: supports flashless 1 bbupdater: cmdCopyRequirePartitionMount: supports REFS 0 bbupdater: cmdCopyRequirePartitionMount: need data partition for coredumps _baseband_update_requires_filesystems_once: query returned {type = mutable dict, count = 3, entries => 0 : {contents = "requireSystemPartitionMount"} = {value = true} 1 : {contents = "requireUserPartitionMount"} = {value = true} 2 : {contents = "requestedBasebandFSPartitionMountSize"} = {value = +0, type = kCFNumberSInt32Type} } entering clean_NAND NAND format complete entering ramrod_probe_media find_filesystem_partitions: storage=/dev/disk0 system= data= baseband data= log= entering format_effaceable_storage effaceable storage is formatted, clearing it effaceable storaged cleared entering format_storage_for_LwVM entering ramrod_probe_media device partitioning scheme is GPT unexpected partition 'LwVM' - skipping find_filesystem_partitions: storage=/dev/disk0s1 system= data= baseband data= log= entering create_filesystem_partitions User specified system partition size, skipping firmware extras size. system partition padding size is: 272629760 bytes unable to open : No such file or directory creating 2 partitions creating encrypted data partition entering ramrod_probe_media device partitioning scheme is GPT find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log= wipe entire partition: 1 (old = 0 new = 2255) block size for /dev/disk0s1s1: 4096 /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1 executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1 Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal block size for /dev/disk0s1s2: 4096 /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2 executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2 Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal entering ramrod_probe_media device partitioning scheme is GPT find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log= entering mount_filesystems executing /sbin/fsck_hfs ** /dev/rdisk0s1s1 Executing fsck_hfs (version hfs-285). ** Checking Journaled HFS Plus volume. ** Detected a case-sensitive volume. The volume name is System ** Checking extents overflow file. ** Checking catalog file. ** Checking multi-linked files. ** Checking catalog hierarchy. ** Checking extended attributes file. ** Checking volume bitmap. ** Checking volume information. ** Trimming unused blocks. ** The volume System appears to be OK. executing /sbin/mount_hfs mount_hfs: Could not create property for re-key environment check: No such file or directory /dev/disk0s1s1 mounted on /mnt1 executing /sbin/fsck_hfs ** /dev/rdisk0s1s2 Executing fsck_hfs (version hfs-285). ** Checking Journaled HFS Plus volume. ** Detected a case-sensitive volume. The volume name is Data ** Checking extents overflow file. ** Checking catalog file. ** Checking multi-linked files. ** Checking catalog hierarchy. ** Checking extended attributes file. ** Checking volume bitmap. ** Checking volume information. ** Trimming unused blocks. ** The volume Data appears to be OK. executing /sbin/mount_hfs mount_hfs: Could not create property for re-key environment check: No such file or directory /dev/disk0s1s2 mounted on /mnt2 entering resize_system_partition_to_options User specified system partition size, skipping firmware extras size. Found SystemPartitionPadding value of 272629760 bytes Erasing system partition prior to resize operation. block size for /dev/disk0s1s1: 4096 /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1 executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1 Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal executing /sbin/fsck_hfs ** /dev/rdisk0s1s1 Executing fsck_hfs (version hfs-285). ** Checking Journaled HFS Plus volume. ** Detected a case-sensitive volume. The volume name is System ** Checking extents overflow file. ** Checking catalog file. ** Checking multi-linked files. ** Checking catalog hierarchy. ** Checking extended attributes file. ** Checking volume bitmap. ** Checking volume information. ** Trimming unused blocks. ** The volume System appears to be OK. executing /sbin/mount_hfs mount_hfs: Could not create property for re-key environment check: No such file or directory /dev/disk0s1s1 mounted on /mnt1 Trying to resize system partition to 2364538880 bytes aka 2255 MB entering adjust_partition_preflight partition:0 requiredSize=577280 no change in size Successfully resized the system partition entering maximize_data_partition entering adjust_partition_preflight partition:1 requiredSize=<<<<>>>>>6 maximizing data partition to 13489930239 bytes entering adjust_partition_preflight partition:1 requiredSize=3293440 no change in size Successfully resized data partition to consume free blocks The system partition now has a total HFS+ capacity of 2255 MB entering ramrod_probe_media device partitioning scheme is GPT find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log= entering unmount_filesystems entering restore_images Successfully marked device node /dev/rdisk0s1s1 as static data executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61 ASR: asr: Unable to disable idle sleep - XXXXXXXXX9 ASR STATUS: start 242.6 multicast-client ASR: Waiting for connection attempt from server AppleUSBDeviceMux::handleConnectResult new session 0x8a974c08 established 12345<-lo0->49176 12345<-usb->36864 ASR STATUS: setup ASR: Validating target... ASR: done ASR STATUS: metadata ASR: Validating source... ASR: done ASR: Retrieving scan information... ASR: done ASR: Validating sizes... ASR: done ASR STATUS: restore ASR RESTORE PROGRESS: 2% ASR RESTORE PROGRESS: 4% ASR RESTORE PROGRESS: 6% ASR RESTORE PROGRESS: 8% ASR RESTORE PROGRESS: 10% ASR RESTORE PROGRESS: 12% ASR RESTORE PROGRESS: 14% ASR RESTORE PROGRESS: 16% ASR RESTORE PROGRESS: 18% ASR RESTORE PROGRESS: 20% ASR RESTORE PROGRESS: 22% ASR RESTORE PROGRESS: 24% ASR RESTORE PROGRESS: 26% ASR RESTORE PROGRESS: 28% ASR RESTORE PROGRESS: 30% ASR RESTORE PROGRESS: 32% ASR RESTORE PROGRESS: 34% ASR RESTORE PROGRESS: 36% ASR RESTORE PROGRESS: 38% ASR RESTORE PROGRESS: 40% ASR RESTORE PROGRESS: 42% ASR RESTORE PROGRESS: 44% ASR RESTORE PROGRESS: 46% ASR RESTORE PROGRESS: 48% ASR RESTORE PROGRESS: 50% ASR RESTORE PROGRESS: 52% ASR RESTORE PROGRESS: 54% ASR RESTORE PROGRESS: 56% ASR RESTORE PROGRESS: 58% ASR RESTORE PROGRESS: 60% ASR RESTORE PROGRESS: 62% ASR RESTORE PROGRESS: 64% ASR RESTORE PROGRESS: 66% ASR RESTORE PROGRESS: 68% ASR RESTORE PROGRESS: 70% ASR RESTORE PROGRESS: 72% ASR RESTORE PROGRESS: 74% ASR RESTORE PROGRESS: 76% ASR RESTORE PROGRESS: 78% ASR RESTORE PROGRESS: 80% ASR RESTORE PROGRESS: 82% ASR RESTORE PROGRESS: 84% ASR RESTORE PROGRESS: 86% ASR RESTORE PROGRESS: 88% ASR RESTORE PROGRESS: 90% ASR RESTORE PROGRESS: 92% ASR RESTORE PROGRESS: 94% ASR RESTORE PROGRESS: 96% ASR RESTORE PROGRESS: 98% AppleUSBDeviceMux::sessionUpcall socket is closed, session 0x8a974c08 (12345<-lo0->49176 12345<-usb->36864) ASR RESTORE PROGRESS: 100% ASR: Copied 2090361344 bytes in 115.26 seconds, 17710.62 KiB/s ASR STATUS: verify ASR VERIFY PROGRESS: 2% ASR VERIFY PROGRESS: 4% ASR VERIFY PROGRESS: 6% ASR VERIFY PROGRESS: 8% ASR VERIFY PROGRESS: 10% ASR VERIFY PROGRESS: 12% ASR VERIFY PROGRESS: 14% ASR VERIFY PROGRESS: 16% ASR VERIFY PROGRESS: 18% ASR VERIFY PROGRESS: 20% ASR VERIFY PROGRESS: 22% ASR VERIFY PROGRESS: 24% ASR VERIFY PROGRESS: 26% ASR VERIFY PROGRESS: 28% ASR VERIFY PROGRESS: 30% ASR VERIFY PROGRESS: 32% ASR VERIFY PROGRESS: 34% ASR VERIFY PROGRESS: 36% ASR VERIFY PROGRESS: 38% ASR VERIFY PROGRESS: 40% ASR VERIFY PROGRESS: 42% ASR VERIFY PROGRESS: 44% ASR VERIFY PROGRESS: 46% ASR VERIFY PROGRESS: 48% ASR VERIFY PROGRESS: 50% ASR VERIFY PROGRESS: 52% ASR VERIFY PROGRESS: 54% ASR VERIFY PROGRESS: 56% ASR VERIFY PROGRESS: 58% ASR VERIFY PROGRESS: 60% ASR VERIFY PROGRESS: 62% ASR VERIFY PROGRESS: 64% ASR VERIFY PROGRESS: 66% ASR VERIFY PROGRESS: 68% ASR VERIFY PROGRESS: 70% ASR VERIFY PROGRESS: 72% ASR VERIFY PROGRESS: 74% ASR VERIFY PROGRESS: 76% ASR VERIFY PROGRESS: 78% ASR VERIFY PROGRESS: 80% ASR VERIFY PROGRESS: 82% ASR VERIFY PROGRESS: 84% ASR VERIFY PROGRESS: 86% ASR VERIFY PROGRESS: 88% ASR VERIFY PROGRESS: 90% ASR VERIFY PROGRESS: 92% ASR VERIFY PROGRESS: 94% ASR VERIFY PROGRESS: 96% ASR VERIFY PROGRESS: 98% ASR VERIFY PROGRESS: 100% ASR: Verified SHA-1 checksum 2090361344 bytes in 29.86 seconds, 68368.81 KiB/s ASR STATUS: finish entering ramrod_probe_media device partitioning scheme is GPT find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2 baseband data= log= entering mount_filesystems executing /sbin/fsck_hfs ** /dev/rdisk0s1s1 Executing fsck_hfs (version hfs-285). ** Checking Journaled HFS Plus volume. ** Detected a case-sensitive volume. The volume name is Stowe12F70.N94OS ** Checking extents overflow file. ** Checking catalog file. ** Checking multi-linked files. ** Checking catalog hierarchy. ** Checking extended attributes file. ** Checking volume bitmap. ** Checking volume information. ** Trimming unused blocks. ** The volume Stowe12F70.N94OS appears to be OK. executing /sbin/mount_hfs mount_hfs: Could not create property for re-key environment check: No such file or directory /dev/disk0s1s1 mounted on /mnt1 executing /sbin/fsck_hfs ** /dev/rdisk0s1s2 Executing fsck_hfs (version hfs-285). ** Checking Journaled HFS Plus volume. ** Detected a case-sensitive volume. The volume name is Data ** Checking extents overflow file. ** Checking catalog file. ** Checking multi-linked files. ** Checking catalog hierarchy. ** Checking extended attributes file. ** Checking volume bitmap. ** Checking volume information. ** Trimming unused blocks. ** The volume Data appears to be OK. executing /sbin/mount_hfs mount_hfs: Could not create property for re-key environment check: No such file or directory /dev/disk0s1s2 mounted on /mnt2 RestoredFDRRestoreSavedData success entering install_kernel_cache writing kernelcache to /mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache entering install_secure_vault_daemon entering get_hardware_platform platform-name = s5l8940x linking /mnt1/usr/sbin/securekeyvaultd to /mnt1/usr/sbin/securekeyvaultd.s5l8940x no securekeyvaultd for s5l8940x entering ramrod_ticket_write writing ticket to /mnt1/System/Library/Caches/apticket.der entering RestoredFDRRecover entering update_device_firmware entering add_baseband_partition_options entering ramrod_update_device_firmware entering update_iBoot found 'AppleImage3NORAccess' object in IORegistry entering update_iBoot_image3_NOR_access write_image3_data: flashing illb data (length = 0x24a1a) AppleImage3NORAccess::_getSuperBlock imageVersion: 3 AppleImage3NORAccess::_getSuperBlock imageVersion: 3 write_image3_data: flashing SCAB data (length = 0xb00) ticket updated write_image3_data: flashing ibot data (length = 0x4518c) write_image3_data: flashing bat1 data (length = 0x80c) write_image3_data: flashing dtre data (length = 0x142cc) write_image3_data: flashing glyP data (length = 0x2e4c) write_image3_data: flashing bat0 data (length = 0xaa4c) write_image3_data: flashing chg0 data (length = 0x260c) write_image3_data: flashing batF data (length = 0x1484c) write_image3_data: flashing chg1 data (length = 0x88cc) write_image3_data: flashing logo data (length = 0x1a8c) write_image3_data: flashing recm data (length = 0x12ecc) [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format entering update_gas_gauge entering update_ir_mcu looking for mcu nub...no entry from path! TiSerialFlasher not supported on this platform. Exiting. entering update_baseband update_baseband: registering for progress notifications create_baseband_update_options: Got imeisv: 18 baseband updater options = {type = mutable dict, count = 7, entries => 0 : {contents = "SystemRoot"} = {contents = "/mnt1"} 5 : {contents = "DisallowFusiing"} = {value = true} 6 : {contents = "autoSetupEnv"} = {value = false} 7 : {contents = "DataRoot"} = {contents = "/mnt2"} 8 : {contents = "forceUpdate"} = {value = true} 9 : {contents = "disablePing"} = {value = true} 10 : {contents = "IMEISwVersion"} = {value = +18, type = kCFNumberSInt32Type} } update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage first bbupdater: BEGIN: Preparing first stage bbupdater: Requested boot mode: kBBUBootModeNone bbupdater: Creating transport, attempts remaining 5...bbupdater: OK bbupdater: END: Preparing first stage bbupdater: Connecting to Loader...bbupdater: OK bbupdater: Getting Version...bbupdater: OK bbupdater: Loader version: PBL-DownloaderVER1.0 bbupdater: Fusing disallowed, will treat as fused bbupdater: END: Querying info at stage first update_baseband: query returned {type = mutable dict, count = 5, entries => 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (123870 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at first bbupdater: Loading... bbupdater: 0x2001a100 of 0x2002ff28 (26 percent) bbupdater: 0x20022200 of 0x2002ff28 (53 percent) bbupdater: 0x2002a300 of 0x2002ff28 (80 percent) bbupdater: 0x2002ff28 of 0x2002ff28 (100 percent) bbupdater: bbupdater: Launching...bbupdater: OK bbupdater: END: Perform stage at first send_bbupdate_status: sending baseband update status to host update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage second bbupdater: BEGIN: Preparing Second stage bbupdater: Creating transport, attempts remaining 0...bbupdater: OK bbupdater: END: Preparing Second stage bbupdater: BEGIN: Gathering Personalization parameters... bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeMaverick bbupdater: Hello response boot mode: ETLSAHModeMaverick bbupdater: Hello reserved fields: 02 bbupdater: Starting Maverick Protocol bbupdater: Sending Erase Response: Length 12 Type 161 Erase EFS 0 bbupdater: Checking Manifest Request: Length 40 Type 162 bbupdater: NONCE: <<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>> bbupdater: SNUM: 0x244235BD bbupdater: CertID: 2 bbupdater: CHIPID: 0x005a00e1 bbupdater: END: Gathering Personalization parameters... bbupdater: END: Querying info at stage second update_baseband: query returned {type = mutable dict, count = 6, entries => 0 : {contents = "Nonce"} = {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (11259992 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at second bbupdater: BEGIN: Sending 1 Images bbupdater: Resuming Maverick Protocol bbupdater: Sent Manifest with length 586 bbupdater: DBL_HASH: <<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>> bbupdater: OSBL_HASH: <<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>> bbupdater: AMSS_HASH: <<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>> bbupdater: Sending Hash Response: value 1 success 1 bbupdater: Disconnecting...bbupdater: OK bbupdater: END: Sending 1 Images bbupdater: Saving image to /mnt1/usr/local/standalone/firmware/Baseband/Trek bbupdater: BEGIN: Preparing Initial stage bbupdater: Requested boot mode: kBBUBootModeNone bbupdater: Creating transport, attempts remaining 5...bbupdater: OK bbupdater: END: Preparing Initial stage bbupdater: END: Perform stage at second send_bbupdate_status: sending baseband update status to host update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage first bbupdater: BEGIN: Preparing first stage bbupdater: END: Preparing first stage bbupdater: Connecting to Loader...bbupdater: OK bbupdater: Getting Version...bbupdater: OK bbupdater: Loader version: PBL-DownloaderVER1.0 bbupdater: END: Querying info at stage first update_baseband: query returned {type = mutable dict, count = 6, entries => 0 : {contents = "Nonce"} = {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (11259992 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at first bbupdater: Loading... bbupdater: 0x2001a100 of 0x20030034 (26 percent) bbupdater: 0x20022200 of 0x20030034 (53 percent) bbupdater: 0x2002a300 of 0x20030034 (80 percent) bbupdater: 0x20030034 of 0x20030034 (100 percent) bbupdater: bbupdater: Launching...bbupdater: OK bbupdater: END: Perform stage at first send_bbupdate_status: sending baseband update status to host update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage second bbupdater: BEGIN: Preparing Second stage bbupdater: Creating transport, attempts remaining 0...bbupdater: OK bbupdater: END: Preparing Second stage bbupdater: Not in restore mode - skipping gathering Personalization parameters... bbupdater: END: Querying info at stage second update_baseband: query returned {type = mutable dict, count = 6, entries => 0 : {contents = "Nonce"} = {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (11259992 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at second bbupdater: BEGIN: Sending 1 Images bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeMaverick bbupdater: Hello response boot mode: ETLSAHModeMaverick bbupdater: Hello reserved fields: 02 bbupdater: Starting Maverick Protocol bbupdater: Sending Erase Response: Length 12 Type 161 Erase EFS 0 bbupdater: Checking Manifest Request: Length 40 Type 162 bbupdater: Sent Manifest with length 586 bbupdater: Sending Hash Response: value 1 success 1 bbupdater: Disconnecting...bbupdater: OK bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModePending bbupdater: Hello response boot mode: ETLSAHModePending bbupdater: Hello reserved fields: 02 bbupdater: Sending Image 'OSBL'... bbupdater: 0x6e050 of 0x6e050 (100 percent) bbupdater: bbupdater: Took 0.042311 seconds bbupdater: Disconnecting...bbupdater: OK bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeComplete bbupdater: Hello response boot mode: ETLSAHModeComplete bbupdater: Hello reserved fields: 02 bbupdater: Sending Image 'ELF'... bbupdater: 0x32000 of 0x12db000 (1 percent) bbupdater: 0x680d8 of 0x12db000 (2 percent) bbupdater: 0x885000 of 0x12db000 (45 percent) bbupdater: 0x1085000 of 0x12db000 (87 percent) bbupdater: 0x11b6000 of 0x12db000 (93 percent) bbupdater: 0x11ba000 of 0x12db000 (94 percent) bbupdater: 0x12cc000 of 0x12db000 (99 percent) bbupdater: 0x12db000 of 0x12db000 (100 percent) bbupdater: bbupdater: Took 2.045714 seconds bbupdater: Disconnecting...bbupdater: OK bbupdater: END: Sending 1 Images bbupdater: Waiting 0 seconds...bbupdater: OK bbupdater: BEGIN: Preparing Initial stage bbupdater: Requested boot mode: kBBUBootModeNone bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 3 bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 2 bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 1 bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 0 bbupdater: Attempting to boot up once more before triggering EFS erase bbupdater: Forcing into first stage bbupdater: powercycling modem bbupdater: END(kBBUReturnTryAgain): Preparing Initial stage bbupdater: END: Perform stage at second send_bbupdate_status: sending baseband update status to host update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage first bbupdater: BEGIN: Preparing first stage bbupdater: END: Preparing first stage bbupdater: Connecting to Loader...bbupdater: OK bbupdater: Getting Version...bbupdater: OK bbupdater: Loader version: PBL-DownloaderVER1.0 bbupdater: END: Querying info at stage first update_baseband: query returned {type = mutable dict, count = 6, entries => 0 : {contents = "Nonce"} = {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (11259992 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at first bbupdater: Loading... bbupdater: 0x2001a100 of 0x20030034 (26 percent) bbupdater: 0x20022200 of 0x20030034 (53 percent) bbupdater: 0x2002a300 of 0x20030034 (80 percent) bbupdater: 0x20030034 of 0x20030034 (100 percent) bbupdater: bbupdater: Launching...bbupdater: OK bbupdater: END: Perform stage at first send_bbupdate_status: sending baseband update status to host update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage second bbupdater: BEGIN: Preparing Second stage bbupdater: Creating transport, attempts remaining 0...bbupdater: OK bbupdater: END: Preparing Second stage bbupdater: Not in restore mode - skipping gathering Personalization parameters... bbupdater: END: Querying info at stage second update_baseband: query returned {type = mutable dict, count = 6, entries => 0 : {contents = "Nonce"} = {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (11259992 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at second bbupdater: BEGIN: Sending 1 Images bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeMaverick bbupdater: Hello response boot mode: ETLSAHModeMaverick bbupdater: Hello reserved fields: 02 bbupdater: Starting Maverick Protocol bbupdater: Sending Erase Response: Length 12 Type 161 Erase EFS 0 bbupdater: Checking Manifest Request: Length 40 Type 162 bbupdater: Sent Manifest with length 586 bbupdater: Sending Hash Response: value 1 success 1 bbupdater: Disconnecting...bbupdater: OK bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModePending bbupdater: Hello response boot mode: ETLSAHModePending bbupdater: Hello reserved fields: 02 bbupdater: Sending Image 'OSBL'... bbupdater: 0x6e050 of 0x6e050 (100 percent) bbupdater: bbupdater: Took 0.042160 seconds bbupdater: Disconnecting...bbupdater: OK bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeComplete bbupdater: Hello response boot mode: ETLSAHModeComplete bbupdater: Hello reserved fields: 02 bbupdater: Sending Image 'ELF'... bbupdater: 0x32000 of 0x12db000 (1 percent) bbupdater: 0x680d8 of 0x12db000 (2 percent) bbupdater: 0x885000 of 0x12db000 (45 percent) bbupdater: 0x1085000 of 0x12db000 (87 percent) bbupdater: 0x11b6000 of 0x12db000 (93 percent) bbupdater: 0x11ba000 of 0x12db000 (94 percent) bbupdater: 0x12cc000 of 0x12db000 (99 percent) bbupdater: 0x12db000 of 0x12db000 (100 percent) bbupdater: bbupdater: Took 2.045785 seconds bbupdater: Disconnecting...bbupdater: OK bbupdater: END: Sending 1 Images bbupdater: Waiting 0 seconds...bbupdater: OK bbupdater: BEGIN: Preparing Initial stage bbupdater: Requested boot mode: kBBUBootModeNone bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 3 bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 2 bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 1 bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 0 bbupdater: Attempting to erase EFS and restarting the update process bbupdater: Forcing into first stage bbupdater: powercycling modem bbupdater: END(kBBUReturnTryAgain): Preparing Initial stage bbupdater: END: Perform stage at second send_bbupdate_status: sending baseband update status to host update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage first bbupdater: BEGIN: Preparing first stage bbupdater: END: Preparing first stage bbupdater: Connecting to Loader...bbupdater: OK bbupdater: Getting Version...bbupdater: OK bbupdater: Loader version: PBL-DownloaderVER1.0 bbupdater: END: Querying info at stage first update_baseband: query returned {type = mutable dict, count = 6, entries => 0 : {contents = "Nonce"} = {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (11259992 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at first bbupdater: Loading... bbupdater: 0x2001a100 of 0x20030034 (26 percent) bbupdater: 0x20022200 of 0x20030034 (53 percent) bbupdater: 0x2002a300 of 0x20030034 (80 percent) bbupdater: 0x20030034 of 0x20030034 (100 percent) bbupdater: bbupdater: Launching...bbupdater: OK bbupdater: END: Perform stage at first send_bbupdate_status: sending baseband update status to host update_baseband: querying baseband info bbupdater: BEGIN: Querying info at stage second bbupdater: BEGIN: Preparing Second stage bbupdater: Creating transport, attempts remaining 0...bbupdater: OK bbupdater: END: Preparing Second stage bbupdater: Not in restore mode - skipping gathering Personalization parameters... bbupdater: END: Querying info at stage second update_baseband: query returned {type = mutable dict, count = 6, entries => 0 : {contents = "Nonce"} = {length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>} 2 : {contents = "VendorID"} = {value = +3, type = kCFNumberSInt32Type} 3 : {contents = "ChipID"} = {value = +5898465, type = kCFNumberSInt64Type} 4 : {contents = "FusingStatus"} = {value = +3, type = kCFNumberSInt32Type} 5 : {contents = "CertID"} = {value = +2, type = kCFNumberSInt32Type} 6 : {contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX } update_baseband: requesting baseband firmware data update_baseband: received data from host (11259992 bytes) update_baseband: performing next update stage bbupdater: BEGIN: Perform stage at second bbupdater: BEGIN: Sending 1 Images bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeMaverick bbupdater: Hello response boot mode: ETLSAHModeMaverick bbupdater: Hello reserved fields: 02 bbupdater: Starting Maverick Protocol bbupdater: Sending Erase Response: Length 12 Type 161 Erase EFS 1 bbupdater: Checking Manifest Request: Length 40 Type 162 bbupdater: Sent Manifest with length 586 bbupdater: Sending Hash Response: value 1 success 1 bbupdater: Disconnecting...bbupdater: OK bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModePending bbupdater: Hello response boot mode: ETLSAHModePending bbupdater: Hello reserved fields: 02 bbupdater: Sending Image 'OSBL'... bbupdater: 0x6e050 of 0x6e050 (100 percent) bbupdater: bbupdater: Took 0.041432 seconds bbupdater: Disconnecting...bbupdater: OK bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeComplete bbupdater: Hello response boot mode: ETLSAHModeComplete bbupdater: Hello reserved fields: 02 bbupdater: Sending Image 'ELF'... bbupdater: 0x32000 of 0x12db000 (1 percent) bbupdater: 0x680d8 of 0x12db000 (2 percent) bbupdater: 0x885000 of 0x12db000 (45 percent) bbupdater: 0x1085000 of 0x12db000 (87 percent) bbupdater: 0x11b6000 of 0x12db000 (93 percent) bbupdater: 0x11ba000 of 0x12db000 (94 percent) bbupdater: 0x12cc000 of 0x12db000 (99 percent) bbupdater: 0x12db000 of 0x12db000 (100 percent) bbupdater: bbupdater: Took 2.050104 seconds bbupdater: Disconnecting...bbupdater: OK bbupdater: END: Sending 1 Images bbupdater: Waiting 0 seconds...bbupdater: OK bbupdater: BEGIN: Preparing Initial stage bbupdater: Requested boot mode: kBBUBootModeNone bbupdater: Adding 60.000000 seconds in timeout for EFS erase bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 3 bbupdater: Adding 60.000000 seconds in timeout for EFS erase bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 2 bbupdater: Adding 60.000000 seconds in timeout for EFS erase bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 1 bbupdater: Adding 60.000000 seconds in timeout for EFS erase bbupdater: Creating transport, attempts remaining 3...bbupdater: OK bbupdater: Modem not booting, crashed? bbupdater: Modem not booting, attempts 0 bbupdater: END(kBBUReturnResetToPBL): Preparing Initial stage bbupdater: Adding 60.000000 seconds in timeout for EFS erase bbupdater: Creating transport, attempts remaining 5...bbupdater: OK bbupdater: Requested boot mode: kBBUBootModeCoreDump bbupdater: BEGIN: Preparing first stage bbupdater: Overriding boot mode with default kBBUBootModeCoreDump bbupdater: Requested boot mode: kBBUBootModeCoreDump bbupdater: Creating transport, attempts remaining 5...bbupdater: OK bbupdater: END: Preparing first stage bbupdater: Connecting to Loader...bbupdater: OK bbupdater: Getting Version...bbupdater: OK bbupdater: Loader version: PBL-DownloaderVER1.0 bbupdater: Loading... bbupdater: 0x2001a100 of 0x20030034 (26 percent) bbupdater: 0x20022200 of 0x20030034 (53 percent) bbupdater: 0x2002a300 of 0x20030034 (80 percent) bbupdater: 0x20030034 of 0x20030034 (100 percent) bbupdater: bbupdater: Launching...bbupdater: OK bbupdater: BEGIN: Preparing Second stage bbupdater: Creating transport, attempts remaining 0...bbupdater: OK bbupdater: END: Preparing Second stage bbupdater: Overriding boot mode with default kBBUBootModeCoreDump bbupdater: BEGIN: Sending 1 Images bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeMaverick bbupdater: Hello response boot mode: ETLSAHModeMaverick bbupdater: Hello reserved fields: 02 bbupdater: Starting Maverick Protocol bbupdater: Sending Erase Response: Length 12 Type 161 Erase EFS 0 bbupdater: Checking Manifest Request: Length 40 Type 162 bbupdater: Sent Manifest with length 586 bbupdater: Sending Hash Response: value 1 success 1 bbupdater: Disconnecting...bbupdater: OK bbupdater: Waiting for Hello...bbupdater: OK bbupdater: Hello received boot mode: ETLSAHModeMemoryDebug bbupdater: Hello response boot mode: ETLSAHModeMemoryDebug bbupdater: Hello reserved fields: 02 bbupdater: END(kBBUReturnBootedForCoreDump): Sending 1 Images bbupdater: collecting dump at /mnt2//baseband_updater_logs bbupdater: BEGIN: Collecting core dump... bbupdater: Failed to get debug table bbupdater: END(kBBUReturnIOError): Collecting core dump... bbupdater: failed collecting core dumps bbupdater: END(kBBUReturnResetToPBL): Perform stage at second send_bbupdate_status: sending baseband update status to host update_baseband: calling CFNotificationCenterRemoveEveryObserver update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 48 - Modem returned to download mode) Update[Baseband] error - The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage) Update[Baseband] failed - 0 retries remaining... 0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage 1: BBUpdater/30: Modem returned to download mode unable to convert ramrod error 1004 rt ramrod error 1004 ==== end of device restore output ==== 29.06.15 3:41:21,452 iTunes[6888]: tid:16e0b - : Restore failed (result = -1) 29.06.15 3:41:21,453 iTunes[6888]: AMRestorePerformRestoreModeRestoreWithError failed with error: -1 29.06.15 3:41:21,453 iTunes[6888]: tid:16e0b - State Machine Dump, status:ERROR - [state:Recovery remaining-cycles:0] -> [state:RestoreOS remaining-cycles:0 (current state)] 29.06.15 3:41:22,828 iTunes[6888]: tid:16e0b - State is now set to error 29.06.15 3:41:22,829 iTunes[6888]: tid:16e0b - Can't stop watching device log we're not watching 29.06.15 3:41:22,829 iTunes[6888]: tid:16e0b - amai: AMAuthInstallPlatformRemoveDirectory: failed to remove directory: No such file or directory 29.06.15 3:41:22,829 iTunes[6888]: tid:16e0b - Failed to remove directory file:///tmp/PersonalizedBundle_FC657A6A-1493-4A77-A111-E4922D741F71 29.06.15 3:41:23,096 iTunes[6888]: tid:16c8f - iTunes: Restore error 48