[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-19-generic (buildd@komainu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #30-Ubuntu SMP Tue Nov 13 17:48:01 UTC 2012 (Ubuntu 3.5.0-19.30-generic 3.5.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-19-generic root=UUID=7833979f-9155-4706-9c5f-ec0249e07e03 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: /M55S-S3, BIOS F4 12/19/2006 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f4cb0-0x000f4cbf] mapped at [ffff8800000f4cb0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ffeffff] [ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M [ 0.000000] [mem 0x7fe00000-0x7ffeffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x7ffeffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x35532000-0x36a90fff] [ 0.000000] ACPI: RSDP 00000000000f6600 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 000000007fff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP 000000007fff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT 000000007fff30c0 048F5 (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 000000007fff0000 00040 [ 0.000000] ACPI: SSDT 000000007fff7a40 000F4 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 000000007fff7b40 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC 000000007fff79c0 0007C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffeffff] [ 0.000000] NODE_DATA [mem 0x7ffec000-0x7ffeffff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7ffeffff] [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 512048 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] e820: [mem 0x80000000-0xbfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83584 r8192 d22912 u1048576 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-19-generic root=UUID=7833979f-9155-4706-9c5f-ec0249e07e03 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ dd96000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2025912k/2097088k available (6716k kernel code, 452k absent, 70724k reserved, 6453k data, 928k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.437 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.87 BogoMIPS (lpj=8041748) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004040] Security Framework initialized [ 0.004060] AppArmor: AppArmor initialized [ 0.004062] Yama: becoming mindful. [ 0.004320] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008455] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.009001] Mount-cache hash table entries: 256 [ 0.009240] Initializing cgroup subsys cpuacct [ 0.009243] Initializing cgroup subsys memory [ 0.009255] Initializing cgroup subsys devices [ 0.009257] Initializing cgroup subsys freezer [ 0.009259] Initializing cgroup subsys blkio [ 0.009261] Initializing cgroup subsys perf_event [ 0.009291] tseg: 0000000000 [ 0.009306] mce: CPU supports 5 MCE banks [ 0.009316] LVT offset 0 assigned for vector 0xf9 [ 0.009320] using AMD E400 aware idle routine [ 0.009349] SMP alternatives: switching to UP code [ 0.017352] ACPI: Core revision 20120320 [ 0.021675] ftrace: allocating 25133 entries in 99 pages [ 0.032545] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.040002] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.040002] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.040002] ..... (found apic 0 pin 0) ... [ 0.080584] ....... works. [ 0.080586] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 [ 0.084004] Performance Events: AMD PMU driver. [ 0.084004] ... version: 0 [ 0.084004] ... bit width: 48 [ 0.084004] ... generic registers: 4 [ 0.084004] ... value mask: 0000ffffffffffff [ 0.084004] ... max period: 00007fffffffffff [ 0.084004] ... fixed-purpose events: 0 [ 0.084004] ... event mask: 000000000000000f [ 0.084004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.084004] Brought up 1 CPUs [ 0.084004] Total of 1 processors activated (4020.87 BogoMIPS). [ 0.084004] devtmpfs: initialized [ 0.084004] EVM: security.selinux [ 0.084004] EVM: security.SMACK64 [ 0.084004] EVM: security.capability [ 0.084004] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes) [ 0.084004] dummy: [ 0.084004] RTC time: 14:58:06, date: 12/06/12 [ 0.084004] NET: Registered protocol family 16 [ 0.084004] node 0 link 0: io port [1000, fffff] [ 0.084004] TOM: 0000000080000000 aka 2048M [ 0.084004] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.084004] node 0 link 0: mmio [a0000, bffff] [ 0.084004] node 0 link 0: mmio [80000000, ffb7ffff] [ 0.084004] bus: [00, ff] on node 0 link 0 [ 0.084004] bus: 00 [io 0x0000-0xffff] [ 0.084004] bus: 00 [mem 0x80000000-0xfcffffffff] [ 0.084004] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.084004] ACPI: bus type pci registered [ 0.084004] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.084004] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.088811] PCI: Using configuration type 1 for base access [ 0.089994] bio: create slab at 0 [ 0.090115] ACPI: Added _OSI(Module Device) [ 0.090117] ACPI: Added _OSI(Processor Device) [ 0.090118] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.090120] ACPI: Added _OSI(Processor Aggregator Device) [ 0.091284] ACPI: EC: Look up EC in DSDT [ 0.095713] ACPI: Interpreter enabled [ 0.095718] ACPI: (supports S0 S1 S4 S5) [ 0.095740] ACPI: Using IOAPIC for interrupt routing [ 0.101599] ACPI: No dock devices found. [ 0.101607] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.101664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.101742] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.101745] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.101748] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.101750] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.101753] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 0.101755] PCI: root bus 00: hardware-probed resources [ 0.101795] PCI host bridge to bus 0000:00 [ 0.101798] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.101801] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff] [ 0.101804] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.101829] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000 [ 0.102008] pci 0000:00:01.0: [10de:0363] type 00 class 0x060100 [ 0.102031] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.102047] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500 [ 0.102073] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.102080] pci 0000:00:01.1: reg 24: [io 0x1c80-0x1cbf] [ 0.102110] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.102127] pci 0000:00:01.2: [10de:036a] type 00 class 0x050000 [ 0.102171] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310 [ 0.102179] pci 0000:00:02.0: reg 10: [mem 0xfb30a000-0xfb30afff] [ 0.102210] pci 0000:00:02.0: supports D1 D2 [ 0.102213] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102226] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320 [ 0.102235] pci 0000:00:02.1: reg 10: [mem 0xfb304000-0xfb3040ff] [ 0.102266] pci 0000:00:02.1: supports D1 D2 [ 0.102269] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102289] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a [ 0.102305] pci 0000:00:04.0: reg 20: [io 0xf000-0xf00f] [ 0.102332] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185 [ 0.102341] pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7] [ 0.102346] pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.102351] pci 0000:00:05.0: reg 18: [io 0x0970-0x0977] [ 0.102356] pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73] [ 0.102361] pci 0000:00:05.0: reg 20: [io 0xc400-0xc40f] [ 0.102366] pci 0000:00:05.0: reg 24: [mem 0xfb308000-0xfb308fff] [ 0.102396] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185 [ 0.102405] pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7] [ 0.102410] pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3] [ 0.102415] pci 0000:00:05.1: reg 18: [io 0x0960-0x0967] [ 0.102420] pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63] [ 0.102425] pci 0000:00:05.1: reg 20: [io 0xd800-0xd80f] [ 0.102430] pci 0000:00:05.1: reg 24: [mem 0xfb309000-0xfb309fff] [ 0.102463] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401 [ 0.102495] pci 0000:00:06.1: [10de:0371] type 00 class 0x040300 [ 0.102505] pci 0000:00:06.1: reg 10: [mem 0xfb300000-0xfb303fff] [ 0.102542] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.102565] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000 [ 0.102576] pci 0000:00:08.0: reg 10: [mem 0xfb305000-0xfb305fff] [ 0.102581] pci 0000:00:08.0: reg 14: [io 0xdc00-0xdc07] [ 0.102586] pci 0000:00:08.0: reg 18: [mem 0xfb306000-0xfb3060ff] [ 0.102591] pci 0000:00:08.0: reg 1c: [mem 0xfb307000-0xfb30700f] [ 0.102623] pci 0000:00:08.0: supports D1 D2 [ 0.102625] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102645] pci 0000:00:0b.0: [10de:0374] type 01 class 0x060400 [ 0.102673] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102691] pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400 [ 0.102718] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.102738] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.102760] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.102777] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.102794] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.102844] pci 0000:01:0a.0: [104c:8024] type 00 class 0x0c0010 [ 0.102856] pci 0000:01:0a.0: reg 10: [mem 0xfb204000-0xfb2047ff] [ 0.102863] pci 0000:01:0a.0: reg 14: [mem 0xfb200000-0xfb203fff] [ 0.102905] pci 0000:01:0a.0: supports D1 D2 [ 0.102907] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.102929] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.102933] pci 0000:00:06.0: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.102937] pci 0000:00:06.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.102939] pci 0000:00:06.0: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode) [ 0.102942] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.102977] pci 0000:02:00.0: [14f1:8852] type 00 class 0x040000 [ 0.102998] pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfb1fffff 64bit] [ 0.103100] pci 0000:02:00.0: supports D1 D2 [ 0.103103] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.103123] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.103132] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.103136] pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfb1fffff] [ 0.103168] pci 0000:03:00.0: [10de:0a20] type 00 class 0x030000 [ 0.103177] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf8ffffff] [ 0.103187] pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.103196] pci 0000:03:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref] [ 0.103203] pci 0000:03:00.0: reg 24: [io 0xa000-0xa07f] [ 0.103210] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.103256] pci 0000:03:00.1: [10de:0be2] type 00 class 0x040300 [ 0.103265] pci 0000:03:00.1: reg 10: [mem 0xfa000000-0xfa003fff] [ 0.108022] pci 0000:00:0f.0: PCI bridge to [bus 03-03] [ 0.108026] pci 0000:00:0f.0: bridge window [io 0xa000-0xafff] [ 0.108029] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfaffffff] [ 0.108033] pci 0000:00:0f.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.108041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.108221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.108379] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.108383] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.108384] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.136851] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.136902] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.136952] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) [ 0.137000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.137048] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.137097] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15) [ 0.137145] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.137193] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.137241] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.137290] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.137345] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.137393] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 *15) [ 0.137441] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.137490] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 *15) [ 0.137538] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.137591] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.137641] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.137698] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 *15) [ 0.137784] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.137865] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.137944] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.138023] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.138103] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.138182] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.138261] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.138341] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.138420] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.138508] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.138588] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.138669] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.138749] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.138830] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.138910] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.138990] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.139071] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.139155] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.139280] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.139283] vgaarb: loaded [ 0.139284] vgaarb: bridge control possible 0000:03:00.0 [ 0.139498] SCSI subsystem initialized [ 0.139561] libata version 3.00 loaded. [ 0.139584] ACPI: bus type usb registered [ 0.139610] usbcore: registered new interface driver usbfs [ 0.139620] usbcore: registered new interface driver hub [ 0.139648] usbcore: registered new device driver usb [ 0.139739] PCI: Using ACPI for IRQ routing [ 0.142214] PCI: pci_cache_line_size set to 64 bytes [ 0.142273] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.142275] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff] [ 0.142387] NetLabel: Initializing [ 0.142389] NetLabel: domain hash size = 128 [ 0.142390] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.142402] NetLabel: unlabeled traffic allowed by default [ 0.151709] AppArmor: AppArmor Filesystem Enabled [ 0.151745] pnp: PnP ACPI init [ 0.151766] ACPI: bus type pnp registered [ 0.151881] pnp 00:00: [bus 00-ff] [ 0.151884] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.151887] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.151890] pnp 00:00: [io 0x0d00-0xffff window] [ 0.151893] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.151896] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.151898] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.151964] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.152052] pnp 00:01: [io 0x1000-0x107f] [ 0.152055] pnp 00:01: [io 0x1080-0x10ff] [ 0.152058] pnp 00:01: [io 0x1400-0x147f] [ 0.152060] pnp 00:01: [io 0x1480-0x14ff] [ 0.152062] pnp 00:01: [io 0x1800-0x187f] [ 0.152065] pnp 00:01: [io 0x1880-0x18ff] [ 0.152068] pnp 00:01: [mem 0xc0000000-0xcfffffff] [ 0.152125] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.152129] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.152132] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.152135] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.152138] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.152141] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.152145] system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.152149] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.152768] pnp 00:02: [io 0x0010-0x001f] [ 0.152771] pnp 00:02: [io 0x0022-0x003f] [ 0.152774] pnp 00:02: [io 0x0044-0x005f] [ 0.152776] pnp 00:02: [io 0x0062-0x0063] [ 0.152778] pnp 00:02: [io 0x0065-0x006f] [ 0.152781] pnp 00:02: [io 0x0074-0x007f] [ 0.152783] pnp 00:02: [io 0x0091-0x0093] [ 0.152786] pnp 00:02: [io 0x00a2-0x00bf] [ 0.152791] pnp 00:02: [io 0x00e0-0x00ef] [ 0.152794] pnp 00:02: [io 0x04d0-0x04d1] [ 0.152796] pnp 00:02: [io 0x0800-0x087f] [ 0.152799] pnp 00:02: [io 0x0295-0x0314] [ 0.152801] pnp 00:02: [io 0x0290-0x0294] [ 0.152865] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.152868] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.152871] system 00:02: [io 0x0295-0x0314] has been reserved [ 0.152874] system 00:02: [io 0x0290-0x0294] has been reserved [ 0.152878] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.152891] pnp 00:03: [dma 4] [ 0.152894] pnp 00:03: [io 0x0000-0x000f] [ 0.152896] pnp 00:03: [io 0x0080-0x0090] [ 0.152899] pnp 00:03: [io 0x0094-0x009f] [ 0.152901] pnp 00:03: [io 0x00c0-0x00df] [ 0.152942] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.152955] pnp 00:04: [io 0x0070-0x0073] [ 0.152967] pnp 00:04: [irq 8] [ 0.153006] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.153016] pnp 00:05: [io 0x0061] [ 0.153058] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.153069] pnp 00:06: [io 0x00f0-0x00ff] [ 0.153074] pnp 00:06: [irq 13] [ 0.153114] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.153378] pnp 00:07: [io 0x03f8-0x03ff] [ 0.153384] pnp 00:07: [irq 4] [ 0.153460] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.153667] pnp 00:08: [io 0x0378-0x037f] [ 0.153672] pnp 00:08: [irq 7] [ 0.153737] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.153838] pnp 00:09: [io 0x0060] [ 0.153841] pnp 00:09: [io 0x0064] [ 0.153846] pnp 00:09: [irq 1] [ 0.153890] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.153923] pnp 00:0a: [mem 0xf0000000-0xf7ffffff] [ 0.153982] system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.153985] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.154100] pnp 00:0b: [mem 0x000ce200-0x000cffff] [ 0.154103] pnp 00:0b: [mem 0x000f0000-0x000f7fff] [ 0.154106] pnp 00:0b: [mem 0x000f8000-0x000fbfff] [ 0.154108] pnp 00:0b: [mem 0x000fc000-0x000fffff] [ 0.154111] pnp 00:0b: [mem 0x7fff0000-0x7fffffff] [ 0.154116] pnp 00:0b: [mem 0xffff0000-0xffffffff] [ 0.154119] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.154121] pnp 00:0b: [mem 0x00100000-0x7ffeffff] [ 0.154124] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.154127] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.154190] system 00:0b: [mem 0x000ce200-0x000cffff] has been reserved [ 0.154194] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.154197] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.154200] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.154203] system 00:0b: [mem 0x7fff0000-0x7fffffff] could not be reserved [ 0.154207] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved [ 0.154210] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.154213] system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved [ 0.154216] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.154220] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.154223] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.154242] pnp: PnP ACPI: found 12 devices [ 0.154244] ACPI: ACPI bus type pnp unregistered [ 0.160449] Switching to clocksource acpi_pm [ 0.160508] pci 0000:00:06.0: PCI bridge to [bus 01-01] [ 0.160513] pci 0000:00:06.0: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.160518] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.160521] pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfb1fffff] [ 0.160530] pci 0000:03:00.0: BAR 6: assigned [mem 0xe2000000-0xe207ffff pref] [ 0.160533] pci 0000:00:0f.0: PCI bridge to [bus 03-03] [ 0.160536] pci 0000:00:0f.0: bridge window [io 0xa000-0xafff] [ 0.160539] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfaffffff] [ 0.160542] pci 0000:00:0f.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.160552] pci 0000:00:06.0: setting latency timer to 64 [ 0.160560] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.160563] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.160566] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.160569] pci_bus 0000:01: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.160572] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.160574] pci_bus 0000:01: resource 5 [mem 0x80000000-0xfcffffffff] [ 0.160577] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.160580] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfb1fffff] [ 0.160583] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 0.160585] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfaffffff] [ 0.160588] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xefffffff 64bit pref] [ 0.160636] NET: Registered protocol family 2 [ 0.160735] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.161490] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.163249] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.163719] TCP: Hash tables configured (established 262144 bind 65536) [ 0.163722] TCP: reno registered [ 0.163733] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.163756] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.163850] NET: Registered protocol family 1 [ 0.163850] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.163855] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.163924] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.163972] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.164030] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.164081] pci 0000:00:06.1: Enabling HT MSI Mapping [ 0.164140] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.164199] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.164263] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.164291] pci 0000:03:00.0: Boot video device [ 0.164301] PCI: CLS 32 bytes, default 64 [ 0.164969] audit: initializing netlink socket (disabled) [ 0.164984] type=2000 audit(1354805886.160:1): initialized [ 0.191877] Trying to unpack rootfs image as initramfs... [ 0.224516] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.230017] VFS: Disk quotas dquot_6.5.2 [ 0.230074] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.236360] fuse init (API version 7.19) [ 0.236473] msgmni has been set to 3956 [ 0.248222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.248257] io scheduler noop registered [ 0.248258] io scheduler deadline registered (default) [ 0.248292] io scheduler cfq registered [ 0.248442] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 0.248513] pcieport 0000:00:0f.0: irq 41 for MSI/MSI-X [ 0.248576] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.248600] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.248733] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.248739] ACPI: Power Button [PWRB] [ 0.248796] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.248799] ACPI: Power Button [PWRF] [ 0.253193] GHES: HEST is not enabled! [ 0.260115] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.280481] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.317617] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.340405] Linux agpgart interface v0.103 [ 0.341882] brd: module loaded [ 0.342663] loop: module loaded [ 0.342907] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.348362] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 0.348417] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.348595] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 0.348618] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.348951] Fixed MDIO Bus: probed [ 0.349000] tun: Universal TUN/TAP device driver, 1.6 [ 0.349001] tun: (C) 1999-2004 Max Krasnyansky [ 0.349054] PPP generic driver version 2.4.2 [ 0.349106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.349146] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.349149] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.349156] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.349176] ehci_hcd 0000:00:02.1: debug port 1 [ 0.349183] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.349206] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfb304000 [ 0.360161] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.360213] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.360216] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.360219] usb usb1: Product: EHCI Host Controller [ 0.360222] usb usb1: Manufacturer: Linux 3.5.0-19-generic ehci_hcd [ 0.360224] usb usb1: SerialNumber: 0000:00:02.1 [ 0.360358] hub 1-0:1.0: USB hub found [ 0.360364] hub 1-0:1.0: 10 ports detected [ 0.360465] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.360517] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.360520] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.360527] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.360559] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfb30a000 [ 0.418182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.418188] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.418191] usb usb2: Product: OHCI Host Controller [ 0.418193] usb usb2: Manufacturer: Linux 3.5.0-19-generic ohci_hcd [ 0.418195] usb usb2: SerialNumber: 0000:00:02.0 [ 0.418331] hub 2-0:1.0: USB hub found [ 0.418338] hub 2-0:1.0: 10 ports detected [ 0.418451] uhci_hcd: USB Universal Host Controller Interface driver [ 0.418519] usbcore: registered new interface driver libusual [ 0.418559] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.418560] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.418694] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.418777] mousedev: PS/2 mouse device common for all mice [ 0.418890] rtc_cmos 00:04: RTC can wake from S4 [ 0.419032] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.419060] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.419149] device-mapper: uevent: version 1.0.3 [ 0.419217] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.419226] cpuidle: using governor ladder [ 0.419228] cpuidle: using governor menu [ 0.419230] EFI Variables Facility v0.08 2004-May-17 [ 0.421981] ashmem: initialized [ 0.422119] TCP: cubic registered [ 0.422247] NET: Registered protocol family 10 [ 0.422478] NET: Registered protocol family 17 [ 0.422490] Key type dns_resolver registered [ 0.422628] PM: Hibernation image not present or could not be loaded. [ 0.422642] registered taskstats version 1 [ 0.437908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.756053] Freeing initrd memory: 21884k freed [ 0.768239] Key type trusted registered [ 0.770733] Key type encrypted registered [ 0.773552] Magic number: 8:414:990 [ 0.773662] rtc_cmos 00:04: setting system clock to 2012-12-06 14:58:07 UTC (1354805887) [ 0.773708] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00) [ 0.773748] powernow-k8: fid 0xc (2000 MHz), vid 0x8 [ 0.773750] powernow-k8: fid 0xa (1800 MHz), vid 0xa [ 0.773752] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 0.773793] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.773795] EDD information not available. [ 0.775744] Freeing unused kernel memory: 928k freed [ 0.776256] Write protecting the kernel read-only data: 12288k [ 0.781968] Freeing unused kernel memory: 1464k freed [ 0.786860] Freeing unused kernel memory: 1120k freed [ 0.813440] udevd[85]: starting version 175 [ 0.973980] pata_amd 0000:00:04.0: version 0.4.1 [ 0.974026] pata_amd 0000:00:04.0: setting latency timer to 64 [ 0.977746] scsi0 : pata_amd [ 0.979286] scsi1 : pata_amd [ 0.979851] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.979853] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.989571] wmi: Mapper loaded [ 1.000251] sata_nv 0000:00:05.0: version 3.5 [ 1.000267] sata_nv 0000:00:05.0: Using SWNCQ mode [ 1.000314] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1.002417] scsi2 : sata_nv [ 1.003703] scsi3 : sata_nv [ 1.003877] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc400 irq 21 [ 1.003879] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc408 irq 21 [ 1.004167] sata_nv 0000:00:05.1: Using SWNCQ mode [ 1.004215] sata_nv 0000:00:05.1: setting latency timer to 64 [ 1.007808] scsi4 : sata_nv [ 1.007938] scsi5 : sata_nv [ 1.008133] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xd800 irq 20 [ 1.008136] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xd808 irq 20 [ 1.008376] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.008581] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 1.008588] forcedeth 0000:00:08.0: setting latency timer to 64 [ 1.048039] usb 2-7: new low-speed USB device number 2 using ohci_hcd [ 1.148243] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66 [ 1.148251] ata1.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33 [ 1.148259] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x1f) [ 1.148264] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x1f) [ 1.164178] ata1.00: configured for UDMA/66 [ 1.180178] ata1.01: configured for UDMA/33 [ 1.186105] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5 [ 1.191756] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.191759] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.192136] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.192262] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.197277] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5 [ 1.200962] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 1.201313] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 1.201432] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.201537] ata2: port disabled--ignoring [ 1.257188] usb 2-7: New USB device found, idVendor=15d9, idProduct=0a4f [ 1.257192] usb 2-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.257194] usb 2-7: Product: USB OPTICAL MOUSE [ 1.312023] ata3: SATA link down (SStatus 0 SControl 300) [ 1.320025] ata5: SATA link down (SStatus 0 SControl 300) [ 1.532432] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:d6:2a:cc [ 1.532436] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.780032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.789169] ata4.00: HPA detected: current 1250261615, native 1250263728 [ 1.789174] ata4.00: ATA-8: WDC WD6401AALS-00E3A0, 05.01D05, max UDMA/133 [ 1.789176] ata4.00: 1250261615 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.805165] ata4.00: configured for UDMA/133 [ 1.805272] scsi 3:0:0:0: Direct-Access ATA WDC WD6401AALS-0 05.0 PQ: 0 ANSI: 5 [ 1.805459] sd 3:0:0:0: [sda] 1250261615 512-byte logical blocks: (640 GB/596 GiB) [ 1.805505] sd 3:0:0:0: [sda] Write Protect is off [ 1.805508] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.805528] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.805783] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.889506] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 1.889977] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.116027] ata6: SATA link down (SStatus 0 SControl 300) [ 2.119791] [drm] Initialized drm 1.1.0 20060810 [ 2.121329] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 2.139389] usbcore: registered new interface driver usbhid [ 2.139393] usbhid: USB HID core driver [ 2.149506] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input3 [ 2.149895] hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-7/input0 [ 2.154562] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 2.155121] [drm] nouveau 0000:03:00.0: Detected an NV50 generation card (0x0a5000a2) [ 2.156887] [drm] nouveau 0000:03:00.0: Checking PRAMIN for VBIOS [ 2.250870] [drm] nouveau 0000:03:00.0: ... appears to be valid [ 2.250872] [drm] nouveau 0000:03:00.0: Using VBIOS from PRAMIN [ 2.250875] [drm] nouveau 0000:03:00.0: BIT BIOS found [ 2.250878] [drm] nouveau 0000:03:00.0: Bios version 70.16.39.00 [ 2.250882] [drm] nouveau 0000:03:00.0: TMDS table version 2.0 [ 2.250969] firewire_ohci 0000:01:0a.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.253262] [drm] nouveau 0000:03:00.0: MXM: no VBIOS data, nothing to do [ 2.253267] [drm] nouveau 0000:03:00.0: DCB version 4.0 [ 2.253271] [drm] nouveau 0000:03:00.0: DCB outp 00: 01000302 00020030 [ 2.253273] [drm] nouveau 0000:03:00.0: DCB outp 01: 02000300 00000000 [ 2.253275] [drm] nouveau 0000:03:00.0: DCB outp 02: 01032310 00000000 [ 2.253277] [drm] nouveau 0000:03:00.0: DCB outp 03: 02021362 00020010 [ 2.253279] [drm] nouveau 0000:03:00.0: DCB conn 00: 00001030 [ 2.253281] [drm] nouveau 0000:03:00.0: DCB conn 01: 00002161 [ 2.253283] [drm] nouveau 0000:03:00.0: DCB conn 02: 00000200 [ 2.253288] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xD770 [ 2.334577] [drm] nouveau 0000:03:00.0: 0xD9E9: Condition still not met after 20ms, skipping following opcodes [ 2.354425] [drm] nouveau 0000:03:00.0: 0xD9ED: Condition still not met after 20ms, skipping following opcodes [ 2.354452] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xDBA0 [ 2.362165] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xEA74 [ 2.362173] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xEA96 [ 2.404725] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xEC29 [ 2.404726] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xEC8E [ 2.424573] [drm] nouveau 0000:03:00.0: 0xD5D6: Condition still not met after 20ms, skipping following opcodes [ 2.426049] [TTM] Zone kernel: Available graphics memory: 1025654 kiB [ 2.426051] [TTM] Initializing pool allocator [ 2.426056] [TTM] Initializing DMA pool allocator [ 2.426067] [drm] nouveau 0000:03:00.0: Detected 1024MiB VRAM (DDR3) [ 2.426336] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture) [ 2.453967] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.453970] [drm] No driver support for vblank timestamp query. [ 2.459205] [drm] nouveau 0000:03:00.0: 3 available performance level(s) [ 2.459209] [drm] nouveau 0000:03:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 800mV [ 2.459213] [drm] nouveau 0000:03:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 900mV [ 2.459216] [drm] nouveau 0000:03:00.0: 3: core 720MHz shader 1566MHz memory 800MHz voltage 1100mV [ 2.459219] [drm] nouveau 0000:03:00.0: c: core 405MHz shader 810MHz memory 324MHz fanspeed 32% [ 2.465605] [drm] nouveau 0000:03:00.0: MM: using COPY for buffer copies [ 2.567564] [drm] nouveau 0000:03:00.0: allocated 1360x768 fb: 0x2c0000, bo ffff8800365f6800 [ 2.567648] fbcon: nouveaufb (fb0) is primary device [ 2.567706] Console: switching to colour frame buffer device 170x48 [ 2.567734] fb0: nouveaufb frame buffer device [ 2.567736] drm: registered panic notifier [ 2.567741] [drm] Initialized nouveau 1.0.0 20120316 for 0000:03:00.0 on minor 0 [ 3.064292] firewire_core 0000:01:0a.0: created device fw0: GUID 001a4d0000c038fc, S400 [ 8.392488] EXT4-fs (sda8): INFO: recovery required on readonly filesystem [ 8.392493] EXT4-fs (sda8): write access will be enabled during recovery [ 9.587165] EXT4-fs (sda8): orphan cleanup on readonly fs [ 9.593941] EXT4-fs (sda8): ext4_orphan_cleanup: deleting unreferenced inode 1310744 [ 9.601931] EXT4-fs (sda8): 1 orphan inode deleted [ 9.601933] EXT4-fs (sda8): recovery complete [ 9.677135] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 11.363759] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 11.699231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.102095] udevd[416]: starting version 175 [ 12.609846] lp: driver loaded but no devices found [ 12.908630] ppdev: user-space parallel port driver [ 12.936802] parport_pc 00:08: reported by Plug and Play ACPI [ 12.936851] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 13.032262] lp0: using parport0 (interrupt-driven). [ 13.107663] i2c i2c-12: nForce2 SMBus adapter at 0x1c00 [ 13.107697] i2c i2c-13: nForce2 SMBus adapter at 0x1c80 [ 13.173316] Bluetooth: Core ver 2.16 [ 13.173408] NET: Registered protocol family 31 [ 13.173410] Bluetooth: HCI device and connection manager initialized [ 13.173412] Bluetooth: HCI socket layer initialized [ 13.173414] Bluetooth: L2CAP socket layer initialized [ 13.173419] Bluetooth: SCO socket layer initialized [ 13.189504] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 13.189641] nv_tco: Watchdog reboot not detected [ 13.189761] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0) [ 13.209564] type=1400 audit(1354802299.930:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=621 comm="apparmor_parser" [ 13.210216] type=1400 audit(1354802299.930:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=621 comm="apparmor_parser" [ 13.223083] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.223088] Bluetooth: BNEP filters: protocol multicast [ 13.541440] MCE: In-kernel MCE decoding enabled. [ 13.544997] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 13.575842] type=1400 audit(1354802300.294:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=708 comm="apparmor_parser" [ 13.576452] type=1400 audit(1354802300.298:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=708 comm="apparmor_parser" [ 13.576771] type=1400 audit(1354802300.298:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=708 comm="apparmor_parser" [ 13.610095] EDAC MC: Ver: 2.1.0 [ 13.699412] AMD64 EDAC driver v3.4.0 [ 13.699453] EDAC amd64: DRAM ECC disabled. [ 13.699457] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 13.699457] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 13.699457] (Note that use of the override may cause unknown side effects.) [ 13.707889] Linux video capture interface: v2.00 [ 13.746498] microcode: AMD CPU family 0xf not supported [ 14.019930] kvm: Nested Virtualization enabled [ 14.258711] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 14.258718] hda_intel: Disabling MSI [ 14.258748] snd_hda_intel 0000:00:06.1: setting latency timer to 64 [ 14.296364] cx23885 driver version 0.0.3 loaded [ 14.296425] cx23885[0]: Your board isn't known (yet) to the driver. [ 14.296425] cx23885[0]: Try to pick one of the existing card configs via [ 14.296425] cx23885[0]: card= insmod option. Updating to the latest [ 14.296425] cx23885[0]: version might help as well. [ 14.296429] cx23885[0]: Here is a list of valid choices for the card= insmod option: [ 14.296430] cx23885[0]: card=0 -> UNKNOWN/GENERIC [ 14.296432] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp [ 14.296434] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800 [ 14.296435] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250 [ 14.296437] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express [ 14.296438] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q [ 14.296440] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500 [ 14.296442] cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200 [ 14.296443] cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700 [ 14.296445] cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400 [ 14.296447] cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express [ 14.296448] cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express [ 14.296450] cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H [ 14.296452] cx23885[0]: card=13 -> Compro VideoMate E650F [ 14.296453] cx23885[0]: card=14 -> TurboSight TBS 6920 [ 14.296455] cx23885[0]: card=15 -> TeVii S470 [ 14.296457] cx23885[0]: card=16 -> DVBWorld DVB-S2 2005 [ 14.296458] cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI [ 14.296460] cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270 [ 14.296461] cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275 [ 14.296463] cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255 [ 14.296465] cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210 [ 14.296466] cx23885[0]: card=22 -> Mygica X8506 DMB-TH [ 14.296468] cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2 [ 14.296469] cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850 [ 14.296471] cx23885[0]: card=25 -> Compro VideoMate E800 [ 14.296473] cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290 [ 14.296474] cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH [ 14.296476] cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200 [ 14.296478] cx23885[0]: card=29 -> GoTView X5 3D Hybrid [ 14.296479] cx23885[0]: card=30 -> NetUP Dual DVB-T/C-CI RF [ 14.296481] cx23885[0]: card=31 -> Leadtek Winfast PxDVR3200 H XC4000 [ 14.296482] cx23885[0]: card=32 -> MPX-885 [ 14.296484] cx23885[0]: card=33 -> Mygica X8507 [ 14.296486] cx23885[0]: card=34 -> TerraTec Cinergy T PCIe Dual [ 14.296487] cx23885[0]: card=35 -> TeVii S471 [ 14.296489] cx23885[0]: card=36 -> Hauppauge WinTV-HVR1255 [ 14.296588] CORE cx23885[0]: subsystem: 14f1:ec80, board: UNKNOWN/GENERIC [card=0,autodetected] [ 14.441487] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 14.441495] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfb000000 [ 14.499378] init: failsafe main process (765) killed by TERM signal [ 15.176754] type=1400 audit(1354802301.898:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=891 comm="apparmor_parser" [ 15.177214] type=1400 audit(1354802301.898:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=891 comm="apparmor_parser" [ 15.296224] type=1400 audit(1354802302.018:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=892 comm="apparmor_parser" [ 15.296684] type=1400 audit(1354802302.018:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=892 comm="apparmor_parser" [ 15.340751] type=1400 audit(1354802302.062:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=894 comm="apparmor_parser" [ 16.464124] input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input4 [ 16.464382] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input5 [ 16.464568] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input6 [ 16.464747] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input7 [ 16.464922] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:06.1/sound/card0/input8 [ 16.465094] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:06.1/sound/card0/input9 [ 16.465268] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:06.1/sound/card0/input10 [ 16.465442] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:06.1/sound/card0/input11 [ 16.466401] hda_intel: Disabling MSI [ 16.466415] hda-intel: 0000:03:00.1: Handle VGA-switcheroo audio client [ 17.456114] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0f.0/0000:03:00.1/sound/card1/input12 [ 17.458238] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0f.0/0000:03:00.1/sound/card1/input13 [ 17.458664] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0f.0/0000:03:00.1/sound/card1/input14 [ 17.458802] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0f.0/0000:03:00.1/sound/card1/input15