# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@crested)  Sun Feb  1 20:25:37 UTC 2009

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen2"
    Screen      2  "Screen2" RightOf "Screen0"
    Screen      3  "Screen3" RightOf "Screen1"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"

# Removed Option "Xinerama" "0"
# Removed Option "Xinerama" "1"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer AL1917"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "ViewSonic VX2033WM"
    HorizSync       24.0 - 82.0
    VertRefresh     58.0 - 75.0
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "DELL 1908FP"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "AOC LM720"
    HorizSync       30.0 - 80.0
    VertRefresh     55.0 - 75.0
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
    Option         "NoLogo" "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9500 GT"
    BusID          "PCI:2:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro FX 470"
    BusID          "PCI:3:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9500 GT"
    BusID          "PCI:2:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro FX 470"
    BusID          "PCI:3:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
EndSection

Section "Screen"

# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1280+0"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1600+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1280+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "TwinViewXineramaInfoOrder" "CRT-0"
# Removed Option "TwinViewXineramaInfoOrder" "CRT-1"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1280+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1600+0"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT-0: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "CRT-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "CRT-1: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection