Calibrating delay loop... delay loop is unreliable, trying to continue OK.
Found chipset "Intel ICH7M". Enabling flash write... WARNING: SPI Configuration Lockdown activated.
OK.
Found SST flash chip "SST25VF016B.T60" (2048 kB, SPI) at physical address 0xffe00000.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Reading old flash chip contents... done.
Erasing and writing flash chip... spi_block_erase_20 failed during command execution at address 0x0
Reading current flash chip contents... done. spi_block_erase_52 failed during command execution at address 0x0
Reading current flash chip contents... done. Transaction error!
spi_block_erase_d8 failed during command execution at address 0x1f0000
Reading current flash chip contents... done. spi_chip_erase_60 failed during command execution
Reading current flash chip contents... done. spi_chip_erase_c7 failed during command execution
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Your flash chip is in an unknown state.
Get help on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom@flashrom.org with the subject "FAILED: <your board name>"!
-------------------------------------------------------------------------------