Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-279.22.1.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Wed Feb 6 03:10:46 UTC 2013 Command line: ro root=/dev/mapper/vg_titan_raid5-lv_titan_root rd_LVM_LV=vg_titan_raid5/lv_titan_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_titan_raid5/lv_titan_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM ignore_loglevel debug debug_locks_verbose=1 sched_debug initcall_debug mminit_loglevel=4 udev.log_priority=8 loglevel=8 earlyprintk=vga,keep log_buf_len=10M print_fatal_signals=1 apm.debug=Y i8042.debug=Y drm.debug=1 scsi_logging_level=1 usbserial.debug=Y option.debug=Y pl2303.debug=Y firewire_ohci.debug=1 hid.debug=1 pci_hotplug.debug=Y pci_hotplug.debug_acpi=Y shpchp.shpchp_debug=Y apic=debug show_lapic=all hpet=verbose lmb=debug pause_on_oops=5 panic=10 sysrq_always_enabled console=tty0 console=ttyS0,38400n8 amd_iommu=on amd_iommu_dump KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000c7e80000 (usable) BIOS-e820: 00000000c7e80000 - 00000000c7e98000 (ACPI data) BIOS-e820: 00000000c7e98000 - 00000000c7ec0000 (ACPI NVS) BIOS-e820: 00000000c7ec0000 - 00000000c7f00000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000438000000 (usable) debug: ignoring loglevel setting. console [earlyvga0] enabled DMI present. SMBIOS version 2.6 @ 0xFC320 DMI: System manufacturer System Product Name/M4A89TD PRO USB3, BIOS 3029 09/07/2012 AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x438000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF8000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000438000000 aka 17280M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xc7e80 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000c7e80000 0000000000 - 00c0000000 page 1G 00c0000000 - 00c7e00000 page 2M 00c7e00000 - 00c7e80000 page 4k kernel direct mapping tables up to c7e80000 @ 10000-13000 init_memory_mapping: 0000000100000000-0000000438000000 0100000000 - 0400000000 page 1G 0400000000 - 0438000000 page 2M kernel direct mapping tables up to 438000000 @ 12000-14000 log_buf_len: 16777216 early log buf free: 520841(99%) RAMDISK: 370f1000 - 37fefd62 ACPI: RSDP 00000000000fbb50 00024 (v02 ACPIAM) ACPI: XSDT 00000000c7e80100 0005C (v01 090712 XSDT1033 20120907 MSFT 00000097) ACPI: FACP 00000000c7e80290 000F4 (v03 090712 FACP1033 20120907 MSFT 00000097) ACPI: DSDT 00000000c7e80470 0E64D (v01 A1656 A1656000 00000000 INTL 20060113) ACPI: FACS 00000000c7e98000 00040 ACPI: APIC 00000000c7e80390 00098 (v01 090712 APIC1033 20120907 MSFT 00000097) ACPI: MCFG 00000000c7e80430 0003C (v01 090712 OEMMCFG 20120907 MSFT 00000097) ACPI: OEMB 00000000c7e98040 00072 (v01 090712 OEMB1033 20120907 MSFT 00000097) ACPI: HPET 00000000c7e8f8c0 00038 (v01 090712 OEMHPET 20120907 MSFT 00000097) ACPI: IVRS 00000000c7e8f900 000D8 (v01 AMD RD890S 00202031 AMD 00000000) ACPI: SSDT 00000000c7e8f9e0 00E10 (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000438000000 mminit::memory_register Entering add_active_range(0, 0x10, 0x9e) 0 entries of 25600 used mminit::memory_register Entering add_active_range(0, 0x100, 0xc7e80) 1 entries of 25600 used mminit::memory_register Entering add_active_range(0, 0x100000, 0x438000) 2 entries of 25600 used Bootmem setup node 0 0000000000000000-0000000438000000 NODE_DATA [0000000000013000 - 0000000000046fff] bootmap [0000000000100000 - 0000000000186fff] pages 87 (9 early reservations) ==> bootmem [0000000000 - 0438000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002010024] TEXT DATA BSS ==> [0001000000 - 0002010024] #3 [00370f1000 - 0037fefd62] RAMDISK ==> [00370f1000 - 0037fefd62] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] #5 [0002011000 - 0002011593] BRK ==> [0002011000 - 0002011593] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] #8 [00c6e80000 - 00c7e80000] LOG BUF ==> [00c6e80000 - 00c7e80000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. found SMP MP-table at [ffff8800000ff780] ff780 mpc: f06e0-f08fc Reserving 130MB of memory at 48MB for crashkernel (System RAM: 17280MB) [ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00438000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000c7e80 0: 0x00100000 -> 0x00438000 mminit::pageflags_layout_widths Section 0 Node 9 Zone 2 Flags 26 mminit::pageflags_layout_shifts Section 19 Node 9 Zone 2 mminit::pageflags_layout_offsets Section 0 Node 55 Zone 53 mminit::pageflags_layout_zoneid Zone ID: 53 -> 64 mminit::pageflags_layout_usage location: 64 -> 53 unused 53 -> 26 flags 26 -> 0 On node 0 totalpages: 4193806 DMA zone: 56 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3823 pages, LIFO batch:0 mminit::memmap_init Initialising map node 0 zone 0 pfns 16 -> 4096 DMA32 zone: 14280 pages used for memmap DMA32 zone: 800440 pages, LIFO batch:31 mminit::memmap_init Initialising map node 0 zone 1 pfns 4096 -> 1048576 Normal zone: 46144 pages used for memmap Normal zone: 3328960 pages, LIFO batch:31 mminit::memmap_init Initialising map node 0 zone 2 pfns 1048576 -> 4423680 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 8 CPUs, 2 hotplug CPUs mapped APIC to ffffffffff5fb000 (fee00000) mapped IOAPIC to ffffffffff5fa000 (fec00000) mapped IOAPIC to ffffffffff5f9000 (fec20000) nr_irqs_gsi: 56 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000c7e80000 - 00000000c7e98000 PM: Registered nosave memory: 00000000c7e98000 - 00000000c7ec0000 PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7f00000 PM: Registered nosave memory: 00000000c7f00000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at c7f00000 (gap: c7f00000:37f00000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94424 r8192 d24360 u262144 pcpu-alloc: s94424 r8192 d24360 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 mminit::zonelist general 0:DMA = 0:DMA mminit::zonelist general 0:DMA32 = 0:DMA32 0:DMA mminit::zonelist general 0:Normal = 0:Normal 0:DMA32 0:DMA mminit::zonelist thisnode 0:DMA = 0:DMA mminit::zonelist thisnode 0:DMA32 = 0:DMA32 0:DMA mminit::zonelist thisnode 0:Normal = 0:Normal 0:DMA32 0:DMA Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4133223 Policy zone: Normal Kernel command line: ro root=/dev/mapper/vg_titan_raid5-lv_titan_root rd_LVM_LV=vg_titan_raid5/lv_titan_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=130M@0M rd_LVM_LV=vg_titan_raid5/lv_titan_swap KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM ignore_loglevel debug debug_locks_verbose=1 sched_debug initcall_debug mminit_loglevel=4 udev.log_priority=8 loglevel=8 earlyprintk=vga,keep log_buf_len=10M print_fatal_signals=1 apm.debug=Y i8042.debug=Y drm.debug=1 scsi_logging_level=1 usbserial.debug=Y option.debug=Y pl2303.debug=Y firewire_ohci.debug=1 hid.debug=1 pci_hotplug.debug=Y pci_hotplug.debug_acpi=Y shpchp.shpchp_debug=Y apic=debug show_lapic=all hpet=verbose lmb=debug pause_on_oops=5 panic=10 sysrq_always_enabled console=tty0 console=ttyS0,38400n8 amd_iommu=on amd_iommu_dump debug: sysrq always enabled. PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 0 size 32 MB Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880037ff0000 - ffff88003bff0000 software IO TLB at phys 0x37ff0000 - 0x3bff0000 Memory: 16229396k/17694720k available (5073k kernel code, 919496k absent, 545828k reserved, 7245k data, 1252k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:1016 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled allocated 134217728 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet: hpet_enable(886): hpet: ID: 0x43538210, PERIOD: 0x429b17e hpet: CFG: 0x0, STATUS: 0x0 hpet: COUNTER_l: 0x0, COUNTER_h: 0x0 hpet: T0: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T0: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T1: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T2: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: hpet_set_mode(350): hpet: ID: 0x43538210, PERIOD: 0x429b17e hpet: CFG: 0x3, STATUS: 0x1 hpet: COUNTER_l: 0x6a691, COUNTER_h: 0x0 hpet: T0: CFG_l: 0x801c, CFG_h: 0xc00000 hpet: T0: CMP_l: 0xc40c2, CMP_h: 0x0 hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T1: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T2: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet clockevent registered Fast TSC calibration using PIT Detected 2708.879 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5417.75 BogoMIPS (lpj=2708879) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20996 entries in 83 pages Setting APIC routing to flat Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 0x00000004 after: 0x00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs 6-0 (apicid-pin) not connected IOAPIC[0]: Set routing entry (6-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-9 -> 0x39 -> IRQ 9 Mode:1 Active:1) IOAPIC[0]: Set routing entry (6-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (6-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 6-16 6-17 6-18 6-19 6-20 6-21 6-22 6-23 (apicid-pin) not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X6 1045T Processor stepping 00 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1254171 ... PM-Timer delta = 357950 ... PM-Timer result ok ..... delta 1254171 ..... mult: 53874423 ..... calibration result: 200667 ..... CPU clock speed is 2709.0010 MHz. ..... host bus clock speed is 200.0667 MHz. calling init_hw_perf_events+0x0/0xfa1 @ 1 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f initcall init_hw_perf_events+0x0/0xfa1 returned 0 after 8789 usecs calling register_trigger_all_cpu_backtrace+0x0/0x14 @ 1 initcall register_trigger_all_cpu_backtrace+0x0/0x14 returned 0 after 0 usecs calling migration_init+0x0/0x71 @ 1 initcall migration_init+0x0/0x71 returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x5a @ 1 initcall spawn_ksoftirqd+0x0/0x5a returned 0 after 0 usecs calling cpu_stop_init+0x0/0xb1 @ 1 initcall cpu_stop_init+0x0/0xb1 returned 0 after 0 usecs calling relay_init+0x0/0x14 @ 1 initcall relay_init+0x0/0x14 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x24e @ 1 initcall tracer_alloc_buffers+0x0/0x24e returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1masked ExtINT on CPU#1 System has AMD C1E enabled #2masked ExtINT on CPU#2 hpet: hpet_set_mode(350): hpet: ID: 0x43538210, PERIOD: 0x429b17e hpet: CFG: 0x3, STATUS: 0x1 hpet: COUNTER_l: 0x1787d69, COUNTER_h: 0x0 hpet: T0: CFG_l: 0x801c, CFG_h: 0xc00000 hpet: T0: CMP_l: 0x17e4e23, CMP_h: 0x0 hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T1: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T2: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0 Switch to broadcast mode on CPU1 Switch to broadcast mode on CPU2 #3masked ExtINT on CPU#3 Switch to broadcast mode on CPU3 #4masked ExtINT on CPU#4 Switch to broadcast mode on CPU4 #5masked ExtINT on CPU#5 Brought up 6 CPUs Switch to broadcast mode on CPU5 Total of 6 processors activated (32506.54 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2648 bytes CPU0 attaching sched-domain: domain 0: span 0-5 level MC groups: 0 (cpu_power = 1023) 1 (cpu_power = 1023) 2 (cpu_power = 1023) 3 (cpu_power = 1023) 4 5 CPU1 attaching sched-domain: domain 0: span 0-5 level MC groups: 1 (cpu_power = 1023) 2 (cpu_power = 1023) 3 (cpu_power = 1023) 4 5 0 (cpu_power = 1023) CPU2 attaching sched-domain: domain 0: span 0-5 level MC groups: 2 (cpu_power = 1023) 3 (cpu_power = 1023) 4 5 0 (cpu_power = 1023) 1 (cpu_power = 1023) CPU3 attaching sched-domain: domain 0: span 0-5 level MC groups: 3 (cpu_power = 1023) 4 5 0 (cpu_power = 1023) 1 (cpu_power = 1023) 2 (cpu_power = 1023) CPU4 attaching sched-domain: domain 0: span 0-5 level MC groups: 4 5 0 (cpu_power = 1023) 1 (cpu_power = 1023) 2 (cpu_power = 1023) 3 (cpu_power = 1023) CPU5 attaching sched-domain: domain 0: span 0-5 level MC groups: 5 0 (cpu_power = 1023) 1 (cpu_power = 1023) 2 (cpu_power = 1023) 3 (cpu_power = 1023) 4 Switch to broadcast mode on CPU0 devtmpfs: initialized calling init_mmap_min_addr+0x0/0x26 @ 1 initcall init_mmap_min_addr+0x0/0x26 returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs calling net_ns_init+0x0/0x103 @ 1 initcall net_ns_init+0x0/0x103 returned 0 after 976 usecs calling e820_mark_nvs_memory+0x0/0x41 @ 1 PM: Registering ACPI NVS region at c7e98000 (163840 bytes) initcall e820_mark_nvs_memory+0x0/0x41 returned 0 after 976 usecs calling cpufreq_tsc+0x0/0x28 @ 1 initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling uv_bau_init+0x0/0xfd1 @ 1 initcall uv_bau_init+0x0/0xfd1 returned 0 after 0 usecs calling init_smp_flush+0x0/0x32 @ 1 initcall init_smp_flush+0x0/0x32 returned 0 after 0 usecs calling cpu_hotplug_pm_sync_init+0x0/0x20 @ 1 initcall cpu_hotplug_pm_sync_init+0x0/0x20 returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0x30 @ 1 initcall alloc_frozen_cpus+0x0/0x30 returned 0 after 0 usecs calling sysctl_init+0x0/0x16 @ 1 initcall sysctl_init+0x0/0x16 returned 0 after 0 usecs calling ksysfs_init+0x0/0xc0 @ 1 initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs calling async_init+0x0/0x60 @ 1 initcall async_init+0x0/0x60 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x60 @ 1 initcall pm_init+0x0/0x60 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x40 @ 1 initcall swsusp_header_init+0x0/0x40 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x41 @ 1 initcall init_misc_binfmt+0x0/0x41 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs calling securityfs_init+0x0/0x53 @ 1 initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs calling random32_init+0x0/0xdb @ 1 initcall random32_init+0x0/0xdb returned 0 after 0 usecs calling __gnttab_init+0x0/0x27 @ 1 initcall __gnttab_init+0x0/0x27 returned -19 after 0 usecs calling regulator_init+0x0/0x2e @ 1 regulator: core version 0.5 initcall regulator_init+0x0/0x2e returned 0 after 976 usecs calling cpufreq_core_init+0x0/0xa6 @ 1 initcall cpufreq_core_init+0x0/0xa6 returned 0 after 0 usecs calling cpuidle_init+0x0/0x40 @ 1 initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs calling sock_init+0x0/0x5e @ 1 initcall sock_init+0x0/0x5e returned 0 after 0 usecs calling net_inuse_init+0x0/0x26 @ 1 initcall net_inuse_init+0x0/0x26 returned 0 after 0 usecs calling netpoll_init+0x0/0x31 @ 1 initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x153 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x153 returned 0 after 976 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs calling xenbus_init+0x0/0x1c0 @ 1 initcall xenbus_init+0x0/0x1c0 returned -19 after 0 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc2 @ 1 initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs calling register_node_type+0x0/0x54 @ 1 initcall register_node_type+0x0/0x54 returned 0 after 0 usecs calling amd_postcore_init+0x0/0x78 @ 1 node 0 link 0: io port [1000, ffffff] TOM: 00000000c8000000 aka 3200M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c8000000, dfffffff] TOM2: 0000000438000000 aka 17280M bus: [00,1f] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [f0000000, ffffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [c8000000, dfffffff] bus: 00 index 4 mmio: [438000000, fcffffffff] initcall amd_postcore_init+0x0/0x78 returned 0 after 17578 usecs calling arch_kdebugfs_init+0x0/0x24e @ 1 initcall arch_kdebugfs_init+0x0/0x24e returned 0 after 0 usecs calling mtrr_if_init+0x0/0x61 @ 1 initcall mtrr_if_init+0x0/0x61 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x2a @ 1 initcall ffh_cstate_init+0x0/0x2a returned -1 after 0 usecs initcall ffh_cstate_init+0x0/0x2a returned with error code -1 calling arch_init_ftrace_syscalls+0x0/0x6f @ 1 initcall arch_init_ftrace_syscalls+0x0/0x6f returned 0 after 0 usecs calling uv_rtc_setup_clock+0x0/0x286 @ 1 initcall uv_rtc_setup_clock+0x0/0x286 returned -19 after 0 usecs calling acpi_pci_init+0x0/0x61 @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x61 returned 0 after 976 usecs calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 usecs calling dmi_id_init+0x0/0x328 @ 1 initcall dmi_id_init+0x0/0x328 returned 0 after 0 usecs calling dma_bus_init+0x0/0x3f @ 1 initcall dma_bus_init+0x0/0x3f returned 0 after 0 usecs calling dma_channel_table_init+0x0/0x119 @ 1 initcall dma_channel_table_init+0x0/0x119 returned 0 after 0 usecs calling pci_arch_init+0x0/0x58 @ 1 PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access initcall pci_arch_init+0x0/0x58 returned 0 after 3906 usecs calling topology_init+0x0/0xa1 @ 1 initcall topology_init+0x0/0xa1 returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x3d @ 1 initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 usecs calling param_sysfs_init+0x0/0x244 @ 1 initcall param_sysfs_init+0x0/0x244 returned 0 after 976 usecs calling pm_sysrq_init+0x0/0x20 @ 1 initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x38 @ 1 initcall init_slow_work+0x0/0x38 returned 0 after 0 usecs calling default_bdi_init+0x0/0xb2 @ 1 initcall default_bdi_init+0x0/0xb2 returned 0 after 0 usecs calling init_bio+0x0/0x10c @ 1 bio: create slab at 0 initcall init_bio+0x0/0x10c returned 0 after 976 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0xf0 @ 1 initcall fsnotify_notification_init+0x0/0xf0 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2c @ 1 initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 976 usecs calling blk_softirq_init+0x0/0x70 @ 1 initcall blk_softirq_init+0x0/0x70 returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x70 @ 1 initcall blk_iopoll_setup+0x0/0x70 returned 0 after 0 usecs calling genhd_device_init+0x0/0x7c @ 1 initcall genhd_device_init+0x0/0x7c returned 0 after 976 usecs calling blk_dev_integrity_init+0x0/0x2a @ 1 initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs calling pci_slot_init+0x0/0x50 @ 1 initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs calling fbmem_init+0x0/0x98 @ 1 initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs calling acpi_init+0x0/0x12f @ 1 ACPI: EC: Look up EC in DSDT ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230) ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fd07f0), AE_ALREADY_EXISTS ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230) ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fd07f0), AE_NOT_FOUND ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 ACPI Warning: Incorrect checksum in table [OEMB] - 12, should be 11 (20090903/tbutils-314) initcall acpi_init+0x0/0x12f returned 0 after 392578 usecs calling dock_init+0x0/0x8d @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0x8d returned 0 after 9765 usecs calling acpi_pci_root_init+0x0/0x32 @ 1 HEST: Table not found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xc7f00000-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xa000-0xa007] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f] pci 0000:00:11.0: reg 24: [mem 0xfe4fe000-0xfe4fe3ff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10: [mem 0xfe4f7000-0xfe4f7fff] pci 0000:00:12.2: reg 10: [mem 0xfe4fe400-0xfe4fe4ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe4fc000-0xfe4fcfff] pci 0000:00:13.2: reg 10: [mem 0xfe4fe800-0xfe4fe8ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.2: reg 10: [mem 0xfe4f8000-0xfe4fbfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10: [mem 0xfe4fd000-0xfe4fdfff] pci 0000:00:16.0: reg 10: [mem 0xfe4ff000-0xfe4fffff] pci 0000:00:16.2: reg 10: [mem 0xfe4fec00-0xfe4fecff] pci 0000:00:16.2: supports D1 D2 pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:16.2: PME# disabled pci 0000:06:00.0: reg 24: [mem 0xfe9fe000-0xfe9fffff] pci 0000:06:00.0: PME# supported from D3hot pci 0000:06:00.0: PME# disabled pci 0000:06:00.1: reg 10: [io 0xec00-0xec07] pci 0000:06:00.1: reg 14: [io 0xe880-0xe883] pci 0000:06:00.1: reg 18: [io 0xe800-0xe807] pci 0000:06:00.1: reg 1c: [io 0xe480-0xe483] pci 0000:06:00.1: reg 20: [io 0xe400-0xe40f] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:04.0: PCI bridge to [bus 06-06] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:05:00.0: reg 10: [io 0xd800-0xd8ff] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] pci 0000:05:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] pci 0000:05:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:06.0: PCI bridge to [bus 05-05] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:04:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:07.0: PCI bridge to [bus 04-04] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:07.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:03:00.0: reg 18: [mem 0xfe6f0000-0xfe6fffff 64bit] pci 0000:03:00.0: reg 20: [io 0xc000-0xc0ff] pci 0000:03:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.1: reg 10: [mem 0xfe6ec000-0xfe6effff 64bit] pci 0000:03:00.1: supports D1 D2 pci 0000:00:0b.0: PCI bridge to [bus 03-03] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff] pci 0000:00:0b.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 10: [mem 0xce000000-0xcfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xfe5ff000-0xfe5fffff 64bit] pci 0000:02:00.0: reg 20: [io 0xb800-0xb8ff] pci 0000:02:00.0: reg 30: [mem 0xfe5c0000-0xfe5dffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:00:0d.0: PCI bridge to [bus 02-02] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff] pci 0000:00:0d.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0d.0: bridge window [mem 0xce000000-0xcfffffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Unable to assume _OSC PCIe control. Disabling ASPM initcall acpi_pci_root_init+0x0/0x32 returned 0 after 1895507 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled. initcall acpi_pci_link_init+0x0/0x43 returned 0 after 137695 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling __setup_shutdown_event+0x0/0x22 @ 1 initcall __setup_shutdown_event+0x0/0x22 returned -19 after 0 usecs calling balloon_init+0x0/0x1e3 @ 1 initcall balloon_init+0x0/0x1e3 returned -19 after 0 usecs calling misc_init+0x0/0xba @ 1 initcall misc_init+0x0/0xba returned 0 after 0 usecs calling vga_arb_device_init+0x0/0xc6 @ 1 vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:03:00.0 initcall vga_arb_device_init+0x0/0xc6 returned 0 after 41015 usecs calling cn_init+0x0/0xa3 @ 1 initcall cn_init+0x0/0xa3 returned 0 after 0 usecs calling init_scsi+0x0/0x91 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x91 returned 0 after 8789 usecs calling ata_init+0x0/0x4fd @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x4fd returned 0 after 9765 usecs calling phy_init+0x0/0x2e @ 1 initcall phy_init+0x0/0x2e returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x36 @ 1 initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs calling usb_init+0x0/0x1a9 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x1a9 returned 0 after 40039 usecs calling serio_init+0x0/0x8f @ 1 initcall serio_init+0x0/0x8f returned 0 after 0 usecs calling input_init+0x0/0x10c @ 1 initcall input_init+0x0/0x10c returned 0 after 0 usecs calling rtc_init+0x0/0x71 @ 1 initcall rtc_init+0x0/0x71 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling hwmon_init+0x0/0x109 @ 1 initcall hwmon_init+0x0/0x109 returned 0 after 0 usecs calling thermal_init+0x0/0x3f @ 1 initcall thermal_init+0x0/0x3f returned 0 after 0 usecs calling md_init+0x0/0x177 @ 1 initcall md_init+0x0/0x177 returned 0 after 0 usecs calling leds_init+0x0/0x40 @ 1 initcall leds_init+0x0/0x40 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x98 @ 1 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes initcall pci_subsys_init+0x0/0x98 returned 0 after 22460 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x1a1 @ 1 initcall net_dev_init+0x0/0x1a1 returned 0 after 0 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling fib_rules_init+0x0/0xa6 @ 1 initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs calling pktsched_init+0x0/0xd0 @ 1 initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs calling tc_filter_init+0x0/0x4c @ 1 initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs calling tc_action_init+0x0/0x4c @ 1 initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 0 usecs calling cipso_v4_init+0x0/0x61 @ 1 initcall cipso_v4_init+0x0/0x61 returned 0 after 0 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x81 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x81 returned 0 after 44921 usecs calling sysctl_init+0x0/0x48 @ 1 initcall sysctl_init+0x0/0x48 returned 0 after 0 usecs calling xen_mc_debugfs+0x0/0x118 @ 1 initcall xen_mc_debugfs+0x0/0x118 returned 0 after 0 usecs calling xen_mmu_debugfs+0x0/0x2be @ 1 initcall xen_mmu_debugfs+0x0/0x2be returned 0 after 0 usecs calling print_all_ICs+0x0/0x51e @ 1 printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0001 ... PIC ISR: 0000 ... PIC ELCR: 0e80 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000208fd ... APIC ICR2: 02000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: ffffffff ... APIC TMCCT: fb0216c8 ... APIC TDCR: 00000003 ... APIC EFEAT: 00040007 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9 ... APIC EILVT1: 00010000 ... APIC EILVT2: 00010000 ... APIC EILVT3: 00010000 printing local APIC contents on CPU#1/1: ... APIC ID: 01000000 (1) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 02000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fd ... APIC ICR2: 04000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: ffffffff ... APIC TMCCT: fa4a555d ... APIC TDCR: 00000003 ... APIC EFEAT: 00040007 ... APIC ECTRL: 00000000 ... APIC EILVT0: 00010000 ... APIC EILVT1: 00010000 ... APIC EILVT2: 00010000 ... APIC EILVT3: 00010000 printing local APIC contents on CPU#2/2: ... APIC ID: 02000000 (2) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 04000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fb ... APIC ICR2: 02000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: ffffffff ... APIC TMCCT: fa2bef3a ... APIC TDCR: 00000003 ... APIC EFEAT: 00040007 ... APIC ECTRL: 00000000 ... APIC EILVT0: 00010000 ... APIC EILVT1: 00010000 ... APIC EILVT2: 00010000 ... APIC EILVT3: 00010000 printing local APIC contents on CPU#3/3: ... APIC ID: 03000000 (3) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 08000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fd ... APIC ICR2: 02000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: ffffffff ... APIC TMCCT: f9f66401 ... APIC TDCR: 00000003 ... APIC EFEAT: 00040007 ... APIC ECTRL: 00000000 ... APIC EILVT0: 00010000 ... APIC EILVT1: 00010000 ... APIC EILVT2: 00010000 ... APIC EILVT3: 00010000 printing local APIC contents on CPU#4/4: ... APIC ID: 04000000 (4) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 10000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 00000000 ... APIC ICR2: 00000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: ffffffff ... APIC TMCCT: f9c0ccd8 ... APIC TDCR: 00000003 ... APIC EFEAT: 00040007 ... APIC ECTRL: 00000000 ... APIC EILVT0: 00010000 ... APIC EILVT1: 00010000 ... APIC EILVT2: 00010000 ... APIC EILVT3: 00010000 printing local APIC contents on CPU#5/5: ... APIC ID: 05000000 (5) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000030 (30) ... APIC PROCPRI: 00000000 ... APIC LDR: 20000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000010000000000000000000000000000000000000000000000000000 ... APIC ESR: 00000000 ... APIC ICR: 000008ef ... APIC ICR2: 1f000000 ... APIC LVTT: 000300ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: ffffffff ... APIC TMCCT: f98b572a ... APIC TDCR: 00000003 ... APIC EFEAT: 00040007 ... APIC ECTRL: 00000000 ... APIC EILVT0: 00010000 ... APIC EILVT1: 00010000 ... APIC EILVT2: 00010000 ... APIC EILVT3: 00010000 number of MP IRQ sources: 15. number of IO-APIC #6 registers: 24. number of IO-APIC #7 registers: 32. testing the IO APIC....................... IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0021 .... register #02: 06000000 ....... : arbitration: 06 .... register #03: 3F000000 ....... : Boot DT : 0 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 03F 0 0 0 0 0 1 1 31 02 03F 0 0 0 0 0 1 1 30 03 03F 0 0 0 0 0 1 1 33 04 03F 0 0 0 0 0 1 1 34 05 03F 0 0 0 0 0 1 1 35 06 03F 0 0 0 0 0 1 1 36 07 03F 0 0 0 0 0 1 1 37 08 03F 0 0 0 0 0 1 1 38 09 03F 0 1 0 1 0 1 1 39 0a 03F 0 0 0 0 0 1 1 3A 0b 03F 0 0 0 0 0 1 1 3B 0c 03F 0 0 0 0 0 1 1 3C 0d 03F 0 0 0 0 0 1 1 3D 0e 03F 0 0 0 0 0 1 1 3E 0f 03F 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IO APIC #7...... .... register #00: 07000000 ....... : physical APIC id: 07 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 001F8021 ....... : max redirection entries: 001F ....... : PRQ implemented: 1 ....... : IO APIC version: 0021 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 1 0 0 0 0 0 0 00 02 000 1 0 0 0 0 0 0 00 03 000 1 0 0 0 0 0 0 00 04 000 1 0 0 0 0 0 0 00 05 000 1 0 0 0 0 0 0 00 06 000 1 0 0 0 0 0 0 00 07 000 1 0 0 0 0 0 0 00 08 000 1 0 0 0 0 0 0 00 09 000 1 0 0 0 0 0 0 00 0a 000 1 0 0 0 0 0 0 00 0b 000 1 0 0 0 0 0 0 00 0c 000 1 0 0 0 0 0 0 00 0d 000 1 0 0 0 0 0 0 00 0e 000 1 0 0 0 0 0 0 00 0f 000 1 0 0 0 0 0 0 00 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 18 000 1 0 0 0 0 0 0 00 19 000 1 0 0 0 0 0 0 00 1a 000 1 0 0 0 0 0 0 00 1b 000 1 0 0 0 0 0 0 00 1c 000 1 0 0 0 0 0 0 00 1d 000 1 0 0 0 0 0 0 00 1e 000 1 0 0 0 0 0 0 00 1f 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. initcall print_all_ICs+0x0/0x51e returned 0 after 2423828 usecs calling hpet_late_init+0x0/0xed @ 1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter hpet: hpet_late_init(942): hpet: ID: 0x43538210, PERIOD: 0x429b17e hpet: CFG: 0x3, STATUS: 0x1 hpet: COUNTER_l: 0xa2ef024, COUNTER_h: 0x0 hpet: T0: CFG_l: 0x801c, CFG_h: 0xc00000 hpet: T0: CMP_l: 0xa34b851, CMP_h: 0x0 hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T1: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0 hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0 hpet: T2: CFG_l: 0x8010, CFG_h: 0xc00000 hpet: T2: CMP_l: 0x1450432e, CMP_h: 0x0 hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0 initcall hpet_late_init+0x0/0xed returned 0 after 178710 usecs calling init_amd_nbs+0x0/0xb8 @ 1 initcall init_amd_nbs+0x0/0xb8 returned 0 after 0 usecs calling uv_ptc_init+0x0/0xc8 @ 1 initcall uv_ptc_init+0x0/0xc8 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x36 @ 1 Switching to clocksource hpet initcall clocksource_done_booting+0x0/0x36 returned 0 after 8793 usecs calling ftrace_init_debugfs+0x0/0x1e4 @ 1 initcall ftrace_init_debugfs+0x0/0x1e4 returned 0 after 25 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 2 usecs calling tracer_init_debugfs+0x0/0x33d @ 1 initcall tracer_init_debugfs+0x0/0x33d returned 0 after 94 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 1 usecs calling event_trace_init+0x0/0x1ef @ 1 initcall event_trace_init+0x0/0x1ef returned 0 after 8229 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 12 usecs calling eventpoll_init+0x0/0xe8 @ 1 initcall eventpoll_init+0x0/0xe8 returned 0 after 115 usecs calling anon_inode_init+0x0/0x125 @ 1 initcall anon_inode_init+0x0/0x125 returned 0 after 5 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 0 usecs calling acpi_event_init+0x0/0x81 @ 1 initcall acpi_event_init+0x0/0x81 returned 0 after 9 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] pnp 00:01: [mem 0xfec20000-0xfec200ff] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [mem 0xf6000000-0xf6003fff] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [dma 4] pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0081-0x0083] pnp 00:03: [io 0x0087] pnp 00:03: [io 0x0089-0x008b] pnp 00:03: [io 0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0070-0x0071] IOAPIC[0]: Set routing entry (6-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) pnp 00:04: [irq 8] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (6-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x03f8-0x03ff] IOAPIC[0]: Set routing entry (6-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) pnp 00:07: [irq 4] pnp 00:07: [dma 0 disabled] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [mem 0xfed00000-0xfed003ff] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:09: [io 0x0060] pnp 00:09: [io 0x0064] pnp 00:09: [mem 0xfec00000-0xfec00fff] pnp 00:09: [mem 0xfee00000-0xfee00fff] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [io 0x0010-0x001f] pnp 00:0a: [io 0x0022-0x003f] pnp 00:0a: [io 0x0062-0x0063] pnp 00:0a: [io 0x0065-0x006f] pnp 00:0a: [io 0x0072-0x007f] pnp 00:0a: [io 0x0080] pnp 00:0a: [io 0x0084-0x0086] pnp 00:0a: [io 0x0088] pnp 00:0a: [io 0x008c-0x008e] pnp 00:0a: [io 0x0090-0x009f] pnp 00:0a: [io 0x00a2-0x00bf] pnp 00:0a: [io 0x00b1] pnp 00:0a: [io 0x00e0-0x00ef] pnp 00:0a: [io 0x04d0-0x04d1] pnp 00:0a: [io 0x040b] pnp 00:0a: [io 0x04d6] pnp 00:0a: [io 0x0c00-0x0c01] pnp 00:0a: [io 0x0c14] pnp 00:0a: [io 0x0c50-0x0c51] pnp 00:0a: [io 0x0c52] pnp 00:0a: [io 0x0c6c] pnp 00:0a: [io 0x0c6f] pnp 00:0a: [io 0x0cd0-0x0cd1] pnp 00:0a: [io 0x0cd2-0x0cd3] pnp 00:0a: [io 0x0cd4-0x0cd5] pnp 00:0a: [io 0x0cd6-0x0cd7] pnp 00:0a: [io 0x0cd8-0x0cdf] pnp 00:0a: [io 0x0800-0x089f] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0a: [io 0x0b00-0x0b1f] pnp 00:0a: [io 0x0b20-0x0b3f] pnp 00:0a: [io 0x0900-0x090f] pnp 00:0a: [io 0x0910-0x091f] pnp 00:0a: [io 0xfe00-0xfefe] pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [mem 0xc7f00000-0xc7ffffff] pnp 00:0a: [mem 0xffb80000-0xffbfffff] pnp 00:0a: [mem 0xfec10000-0xfec1001f] pnp 00:0a: [mem 0xfed80000-0xfed80fff] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0b: [io 0x0230-0x023f] pnp 00:0b: [io 0x0290-0x029f] pnp 00:0b: [io 0x0f40-0x0f4f] pnp 00:0b: [io 0x0a30-0x0a3f] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0xe0000000-0xefffffff] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0x00000000-0x0009ffff] pnp 00:0d: [mem 0x000c0000-0x000cffff] pnp 00:0d: [mem 0x000e0000-0x000fffff] pnp 00:0d: [mem 0x00100000-0xc7efffff] pnp 00:0d: [mem 0xfec00000-0xffffffff] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 1092801 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: [io 0x04d0-0x04d1] has been reserved system 00:0a: [io 0x040b] has been reserved system 00:0a: [io 0x04d6] has been reserved system 00:0a: [io 0x0c00-0x0c01] has been reserved system 00:0a: [io 0x0c14] has been reserved system 00:0a: [io 0x0c50-0x0c51] has been reserved system 00:0a: [io 0x0c52] has been reserved system 00:0a: [io 0x0c6c] has been reserved system 00:0a: [io 0x0c6f] has been reserved system 00:0a: [io 0x0cd0-0x0cd1] has been reserved system 00:0a: [io 0x0cd2-0x0cd3] has been reserved system 00:0a: [io 0x0cd4-0x0cd5] has been reserved system 00:0a: [io 0x0cd6-0x0cd7] has been reserved system 00:0a: [io 0x0cd8-0x0cdf] has been reserved system 00:0a: [io 0x0800-0x089f] has been reserved system 00:0a: [io 0x0b00-0x0b1f] has been reserved system 00:0a: [io 0x0b20-0x0b3f] has been reserved system 00:0a: [io 0x0900-0x090f] has been reserved system 00:0a: [io 0x0910-0x091f] has been reserved system 00:0a: [io 0xfe00-0xfefe] has been reserved system 00:0a: [mem 0xc7f00000-0xc7ffffff] has been reserved system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved system 00:0b: [io 0x0230-0x023f] has been reserved system 00:0b: [io 0x0290-0x029f] has been reserved system 00:0b: [io 0x0f40-0x0f4f] has been reserved system 00:0b: [io 0x0a30-0x0a3f] has been reserved system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0d: [mem 0x00100000-0xc7efffff] could not be reserved system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved initcall pnp_system_init+0x0/0x12 returned 0 after 600110 usecs calling chr_dev_init+0x0/0xc4 @ 1 initcall chr_dev_init+0x0/0xc4 returned 0 after 122 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 4 usecs calling init_pcmcia_bus+0x0/0x74 @ 1 initcall init_pcmcia_bus+0x0/0x74 returned 0 after 12 usecs calling cpufreq_gov_performance_init+0x0/0x12 @ 1 initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs calling cpufreq_gov_userspace_init+0x0/0x12 @ 1 initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 1 usecs calling init_acpi_pm_clocksource+0x0/0xf2 @ 1 initcall init_acpi_pm_clocksource+0x0/0xf2 returned 0 after 4426 usecs calling pcibios_assign_resources+0x0/0x76 @ 1 PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:04.0: PCI bridge to [bus 06-06] pci 0000:00:04.0: PCI bridge to [bus 06-06] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: bridge window [mem pref disabled] pci 0000:00:06.0: PCI bridge to [bus 05-05] pci 0000:00:06.0: PCI bridge to [bus 05-05] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 04-04] pci 0000:00:07.0: PCI bridge to [bus 04-04] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:07.0: bridge window [mem pref disabled] pci 0000:00:0b.0: PCI bridge to [bus 03-03] pci 0000:00:0b.0: PCI bridge to [bus 03-03] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff] pci 0000:00:0b.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:0d.0: PCI bridge to [bus 02-02] pci 0000:00:0d.0: PCI bridge to [bus 02-02] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff] pci 0000:00:0d.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0d.0: bridge window [mem 0xce000000-0xcfffffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 01-01] pci 0000:00:14.4: PCI bridge to [bus 01-01] pci 0000:00:14.4: bridge window [io disabled] pci 0000:00:14.4: bridge window [mem disabled] pci 0000:00:14.4: bridge window [mem pref disabled] alloc irq_desc for 52 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-28 -> 0x49 -> IRQ 52 Mode:1 Active:1) pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 pci 0000:00:04.0: setting latency timer to 64 alloc irq_desc for 53 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-29 -> 0x51 -> IRQ 53 Mode:1 Active:1) pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:07.0: setting latency timer to 64 alloc irq_desc for 54 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-30 -> 0x59 -> IRQ 54 Mode:1 Active:1) pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 pci 0000:00:0d.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:02: resource 2 [mem 0xce000000-0xcfffffff 64bit pref] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 8 [mem 0xc7f00000-0xdfffffff] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff] initcall pcibios_assign_resources+0x0/0x76 returned 0 after 1124541 usecs calling sysctl_core_init+0x0/0x38 @ 1 initcall sysctl_core_init+0x0/0x38 returned 0 after 5 usecs calling inet_init+0x0/0x240 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered initcall inet_init+0x0/0x240 returned 0 after 96527 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 10644 usecs calling pci_apply_final_quirks+0x0/0x35 @ 1 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 IOAPIC[0]: Set routing entry (6-18 -> 0x61 -> IRQ 18 Mode:1 Active:1) pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:12.0: PCI INT A disabled alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 IOAPIC[0]: Set routing entry (6-17 -> 0x69 -> IRQ 17 Mode:1 Active:1) pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:12.2: PCI INT B disabled pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:13.0: PCI INT A disabled pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:13.2: PCI INT B disabled pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:14.5: PCI INT C disabled pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:16.0: PCI INT A disabled pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:16.2: PCI INT B disabled alloc irq_desc for 50 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-26 -> 0x71 -> IRQ 50 Mode:1 Active:1) pci 0000:04:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 pci 0000:04:00.0: PCI INT A disabled pci 0000:03:00.0: Boot video device initcall pci_apply_final_quirks+0x0/0x35 returned 0 after 1372681 usecs calling populate_rootfs+0x0/0xd3 @ 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 15355k freed initcall populate_rootfs+0x0/0xd3 returned 0 after 253384 usecs calling pci_iommu_init+0x0/0x21 @ 1 AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: 3e info 1300 AMD-Vi: mmio-addr: 00000000f6000000 AMD-Vi: DEV_SELECT_RANGE_START devid: 00:00.0 flags: 00 AMD-Vi: DEV_RANGE_END devid: 00:00.2 AMD-Vi: DEV_SELECT devid: 00:04.0 flags: 00 AMD-Vi: DEV_SELECT devid: 06:00.0 flags: 00 AMD-Vi: DEV_SELECT devid: 00:06.0 flags: 00 AMD-Vi: DEV_SELECT devid: 05:00.0 flags: 00 AMD-Vi: DEV_SELECT devid: 00:07.0 flags: 00 AMD-Vi: DEV_SELECT devid: 04:00.0 flags: 00 AMD-Vi: DEV_SELECT devid: 00:0b.0 flags: 00 AMD-Vi: DEV_SELECT_RANGE_START devid: 03:00.0 flags: 00 AMD-Vi: DEV_RANGE_END devid: 03:00.1 AMD-Vi: DEV_SELECT devid: 00:0d.0 flags: 00 AMD-Vi: DEV_SELECT devid: 02:00.0 flags: 00 AMD-Vi: DEV_SELECT devid: 00:11.0 flags: 00 AMD-Vi: DEV_SELECT_RANGE_START devid: 00:12.0 flags: 00 AMD-Vi: DEV_RANGE_END devid: 00:12.2 AMD-Vi: DEV_SELECT_RANGE_START devid: 00:13.0 flags: 00 AMD-Vi: DEV_RANGE_END devid: 00:13.2 AMD-Vi: DEV_SELECT devid: 00:14.0 flags: d7 AMD-Vi: DEV_SELECT devid: 00:14.1 flags: 00 AMD-Vi: DEV_SELECT devid: 00:14.2 flags: 00 AMD-Vi: DEV_SELECT devid: 00:14.3 flags: 00 AMD-Vi: DEV_SELECT devid: 00:14.4 flags: 00 AMD-Vi: DEV_ALIAS_RANGE devid: 01:00.0 flags: 00 devid_to: 00:14.4 AMD-Vi: DEV_RANGE_END devid: 01:1f.7 AMD-Vi: DEV_SELECT devid: 00:14.5 flags: 00 AMD-Vi: DEV_SELECT_RANGE_START devid: 00:16.0 flags: 00 AMD-Vi: DEV_RANGE_END devid: 00:16.2 alloc irq_desc for 55 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-31 -> 0x79 -> IRQ 55 Mode:1 Active:1) pci 0000:00:00.2: PCI INT A -> GSI 55 (level, low) -> IRQ 55 alloc irq_desc for 56 on node 0 alloc kstat_irqs on node 0 pci 0000:00:00.2: irq 56 for MSI/MSI-X AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 AMD-Vi: Initialized for Passthrough Mode AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 initcall pci_iommu_init+0x0/0x21 returned 0 after 569797 usecs calling calgary_fixup_tce_spaces+0x0/0x101 @ 1 initcall calgary_fixup_tce_spaces+0x0/0x101 returned -19 after 0 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 6 usecs calling vsyscall_init+0x0/0x6c @ 1 initcall vsyscall_init+0x0/0x6c returned 0 after 68 usecs calling sbf_init+0x0/0xf6 @ 1 initcall sbf_init+0x0/0xf6 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 6 usecs calling init_tsc_clocksource+0x0/0x83 @ 1 initcall init_tsc_clocksource+0x0/0x83 returned 0 after 2 usecs calling add_rtc_cmos+0x0/0xa8 @ 1 initcall add_rtc_cmos+0x0/0xa8 returned 0 after 8 usecs calling cache_sysfs_init+0x0/0x73 @ 1 initcall cache_sysfs_init+0x0/0x73 returned 0 after 357 usecs calling mcheck_init_device+0x0/0x10c @ 1 initcall mcheck_init_device+0x0/0x10c returned 0 after 100 usecs calling threshold_init_device+0x0/0x90 @ 1 initcall threshold_init_device+0x0/0x90 returned 0 after 60 usecs calling thermal_throttle_init_device+0x0/0xa3 @ 1 initcall thermal_throttle_init_device+0x0/0xa3 returned 0 after 0 usecs calling msr_init+0x0/0x150 @ 1 initcall msr_init+0x0/0x150 returned 0 after 108 usecs calling cpuid_init+0x0/0x150 @ 1 initcall cpuid_init+0x0/0x150 returned 0 after 76 usecs calling ioapic_init_sysfs+0x0/0xbb @ 1 initcall ioapic_init_sysfs+0x0/0xbb returned 0 after 10 usecs calling add_pcspkr+0x0/0x28 @ 1 initcall add_pcspkr+0x0/0x28 returned 0 after 12 usecs calling sgi_uv_sysfs_init+0x0/0xaf @ 1 initcall sgi_uv_sysfs_init+0x0/0xaf returned -19 after 0 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 4 usecs calling init_vdso_vars+0x0/0x208 @ 1 initcall init_vdso_vars+0x0/0x208 returned 0 after 5 usecs calling ia32_binfmt_init+0x0/0x14 @ 1 initcall ia32_binfmt_init+0x0/0x14 returned 0 after 1 usecs calling sysenter_setup+0x0/0x2d0 @ 1 initcall sysenter_setup+0x0/0x2d0 returned 0 after 3 usecs calling init_sched_debug_procfs+0x0/0x2c @ 1 initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 3 usecs calling proc_schedstat_init+0x0/0x22 @ 1 initcall proc_schedstat_init+0x0/0x22 returned 0 after 1 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs calling ioresources_init+0x0/0x3c @ 1 initcall ioresources_init+0x0/0x3c returned 0 after 1 usecs calling uid_cache_init+0x0/0x94 @ 1 initcall uid_cache_init+0x0/0x94 returned 0 after 106 usecs calling init_posix_timers+0x0/0x17a @ 1 initcall init_posix_timers+0x0/0x17a returned 0 after 80 usecs calling init_posix_cpu_timers+0x0/0xe5 @ 1 initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 79 usecs calling create_proc_profile+0x0/0x2d0 @ 1 initcall create_proc_profile+0x0/0x2d0 returned 0 after 0 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 9 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 7 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 1 usecs calling init_tstats_procfs+0x0/0x2c @ 1 initcall init_tstats_procfs+0x0/0x2c returned 0 after 1 usecs calling futex_init+0x0/0x69 @ 1 initcall futex_init+0x0/0x69 returned 0 after 6 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 1 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 1 usecs calling snapshot_device_init+0x0/0x12 @ 1 initcall snapshot_device_init+0x0/0x12 returned 0 after 20 usecs calling crash_save_vmcoreinfo_init+0x0/0x4a9 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x4a9 returned 0 after 13 usecs calling crash_notes_memory_init+0x0/0x36 @ 1 initcall crash_notes_memory_init+0x0/0x36 returned 0 after 4 usecs calling pid_namespaces_init+0x0/0x2d @ 1 Refined TSC clocksource calibration: 2709.041 MHz. initcall pid_namespaces_init+0x0/0x2d returned 0 after 15009 usecs calling utrace_init+0x0/0x52 @ 1 Switching to clocksource tsc initcall utrace_init+0x0/0x52 returned 0 after 9496 usecs calling audit_init+0x0/0x133 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1360778359.343:1): initialized initcall audit_init+0x0/0x133 returned 0 after 27552 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 0 usecs calling init_kprobes+0x0/0x197 @ 1 initcall init_kprobes+0x0/0x197 returned 0 after 6045 usecs calling hung_task_init+0x0/0x53 @ 1 initcall hung_task_init+0x0/0x53 returned 0 after 133 usecs calling utsname_sysctl_init+0x0/0x14 @ 1 initcall utsname_sysctl_init+0x0/0x14 returned 0 after 1 usecs calling init_tracepoints+0x0/0x20 @ 1 initcall init_tracepoints+0x0/0x20 returned 0 after 0 usecs calling ftrace_mod_cmd_init+0x0/0x12 @ 1 initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 0 usecs calling init_events+0x0/0x64 @ 1 initcall init_events+0x0/0x64 returned 0 after 3 usecs calling init_sched_switch_trace+0x0/0x12 @ 1 initcall init_sched_switch_trace+0x0/0x12 returned 0 after 1 usecs calling init_stack_trace+0x0/0x12 @ 1 initcall init_stack_trace+0x0/0x12 returned 0 after 0 usecs calling init_function_trace+0x0/0x3e @ 1 initcall init_function_trace+0x0/0x3e returned 0 after 0 usecs calling init_wakeup_tracer+0x0/0x22 @ 1 initcall init_wakeup_tracer+0x0/0x22 returned 0 after 0 usecs calling stack_trace_init+0x0/0x6b @ 1 initcall stack_trace_init+0x0/0x6b returned 0 after 12 usecs calling init_graph_trace+0x0/0x66 @ 1 initcall init_graph_trace+0x0/0x66 returned 0 after 1 usecs calling init_kmem_tracer+0x0/0x5e @ 1 initcall init_kmem_tracer+0x0/0x5e returned 0 after 1 usecs calling init_blk_tracer+0x0/0x5a @ 1 initcall init_blk_tracer+0x0/0x5a returned 0 after 0 usecs calling perf_event_sysfs_init+0x0/0x93 @ 1 initcall perf_event_sysfs_init+0x0/0x93 returned 0 after 42 usecs calling init_per_zone_wmark_min+0x0/0x6f @ 1 initcall init_per_zone_wmark_min+0x0/0x6f returned 0 after 631 usecs calling kswapd_init+0x0/0x7d @ 1 initcall kswapd_init+0x0/0x7d returned 0 after 73 usecs calling extfrag_debug_init+0x0/0x72 @ 1 initcall extfrag_debug_init+0x0/0x72 returned 0 after 5 usecs calling setup_vmstat+0x0/0xca @ 1 initcall setup_vmstat+0x0/0xca returned 0 after 43 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 3 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs calling hugetlb_init+0x0/0x44e @ 1 HugeTLB registered 2 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x44e returned 0 after 16445 usecs calling ksm_init+0x0/0x192 @ 1 initcall ksm_init+0x0/0x192 returned 0 after 193 usecs calling slab_proc_init+0x0/0x25 @ 1 initcall slab_proc_init+0x0/0x25 returned 0 after 1 usecs calling cpucache_init+0x0/0x4a @ 1 initcall cpucache_init+0x0/0x4a returned 0 after 6 usecs calling hugepage_init+0x0/0x12c @ 1 initcall hugepage_init+0x0/0x12c returned 0 after 1416 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 77 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 1 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 99 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xbe @ 1 initcall inotify_user_setup+0x0/0xbe returned 0 after 107 usecs calling aio_setup+0x0/0xce @ 1 initcall aio_setup+0x0/0xce returned 0 after 248 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 1 usecs calling init_sys32_ioctl+0x0/0x83 @ 1 initcall init_sys32_ioctl+0x0/0x83 returned 0 after 9 usecs calling dquot_init+0x0/0xdc @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) initcall dquot_init+0x0/0xdc returned 0 after 26080 usecs calling init_v2_quota_format+0x0/0x22 @ 1 initcall init_v2_quota_format+0x0/0x22 returned 0 after 0 usecs calling quota_init+0x0/0x26 @ 1 initcall quota_init+0x0/0x26 returned 0 after 4 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 1 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 1 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs calling proc_kcore_init+0x0/0xb5 @ 1 initcall proc_kcore_init+0x0/0xb5 returned 0 after 3 usecs calling vmcore_init+0x0/0x3a1 @ 1 initcall vmcore_init+0x0/0x3a1 returned 0 after 0 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs calling proc_page_init+0x0/0x42 @ 1 initcall proc_page_init+0x0/0x42 returned 0 after 2 usecs calling init_devpts_fs+0x0/0x4c @ 1 initcall init_devpts_fs+0x0/0x4c returned 0 after 11 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs calling init_hugetlbfs_fs+0x0/0x98 @ 1 initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 85 usecs calling init_iso9660_fs+0x0/0x77 @ 1 initcall init_iso9660_fs+0x0/0x77 returned 0 after 83 usecs calling init_nls_cp437+0x0/0x12 @ 1 initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling init_pstore_fs+0x0/0x12 @ 1 initcall init_pstore_fs+0x0/0x12 returned 0 after 1 usecs calling ipc_init+0x0/0x2f @ 1 msgmni has been set to 31728 initcall ipc_init+0x0/0x2f returned 0 after 9321 usecs calling ipc_sysctl_init+0x0/0x14 @ 1 initcall ipc_sysctl_init+0x0/0x14 returned 0 after 1 usecs calling init_mqueue_fs+0x0/0xb4 @ 1 initcall init_mqueue_fs+0x0/0xb4 returned 0 after 86 usecs calling key_proc_init+0x0/0x5e @ 1 initcall key_proc_init+0x0/0x5e returned 0 after 2 usecs calling selinux_nf_ip_init+0x0/0x69 @ 1 SELinux: Registering netfilter hooks initcall selinux_nf_ip_init+0x0/0x69 returned 0 after 11598 usecs calling init_sel_fs+0x0/0x68 @ 1 initcall init_sel_fs+0x0/0x68 returned 0 after 59 usecs calling selnl_init+0x0/0x4d @ 1 initcall selnl_init+0x0/0x4d returned 0 after 3 usecs calling sel_netif_init+0x0/0x66 @ 1 initcall sel_netif_init+0x0/0x66 returned 0 after 2 usecs calling sel_netnode_init+0x0/0x75 @ 1 initcall sel_netnode_init+0x0/0x75 returned 0 after 1 usecs calling sel_netport_init+0x0/0x75 @ 1 initcall sel_netport_init+0x0/0x75 returned 0 after 1 usecs calling aurule_init+0x0/0x37 @ 1 initcall aurule_init+0x0/0x37 returned 0 after 0 usecs calling crypto_wq_init+0x0/0x2e @ 1 initcall crypto_wq_init+0x0/0x2e returned 0 after 209 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 2 usecs calling skcipher_module_init+0x0/0x36 @ 1 initcall skcipher_module_init+0x0/0x36 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 0 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 169 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 77 usecs calling crc32c_mod_init+0x0/0x12 @ 1 initcall crc32c_mod_init+0x0/0x12 returned 0 after 79 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 9913 usecs calling ksign_init+0x0/0x46 @ 1 ksign: Installing public key data Loading keyring - Added public key E213BFD8BD9F0998 - User ID: CentOS (Kernel Module GPG key) initcall ksign_init+0x0/0x46 returned 0 after 40347 usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after 3 usecs calling bsg_init+0x0/0x12e @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) initcall bsg_init+0x0/0x12e returned 0 after 19580 usecs calling throtl_init+0x0/0x44 @ 1 initcall throtl_init+0x0/0x44 returned 0 after 193 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 9288 usecs calling as_init+0x0/0x14 @ 1 io scheduler anticipatory registered initcall as_init+0x0/0x14 returned 0 after 11321 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 10304 usecs calling cfq_init+0x0/0xb3 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0xb3 returned 0 after 11679 usecs calling percpu_counter_startup+0x0/0x33 @ 1 initcall percpu_counter_startup+0x0/0x33 returned 0 after 0 usecs calling dynamic_debug_init+0x0/0x138 @ 1 initcall dynamic_debug_init+0x0/0x138 returned 0 after 49 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 48 usecs calling pcie_portdrv_init+0x0/0x61 @ 1 initcall pcie_portdrv_init+0x0/0x61 returned 0 after 363 usecs calling aer_service_init+0x0/0x2b @ 1 initcall aer_service_init+0x0/0x2b returned 0 after 7 usecs calling pci_hotplug_init+0x0/0x1d @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x1d returned 0 after 14164 usecs calling pcied_init+0x0/0x7a @ 1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 initcall pcied_init+0x0/0x7a returned 0 after 17206 usecs calling acpiphp_init+0x0/0x5f @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpiphp_init+0x0/0x5f returned -19 after 16851 usecs calling pci_stub_init+0x0/0x14a @ 1 initcall pci_stub_init+0x0/0x14a returned 0 after 9 usecs calling fb_console_init+0x0/0x121 @ 1 initcall fb_console_init+0x0/0x121 returned 0 after 15 usecs calling xenfb_init+0x0/0x4c @ 1 initcall xenfb_init+0x0/0x4c returned -19 after 0 usecs calling vesafb_init+0x0/0x23c @ 1 initcall vesafb_init+0x0/0x23c returned 0 after 20 usecs calling efifb_init+0x0/0x1f5 @ 1 initcall efifb_init+0x0/0x1f5 returned -19 after 3 usecs calling intel_idle_init+0x0/0x38c @ 1 initcall intel_idle_init+0x0/0x38c returned -19 after 0 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 2 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 7 usecs calling acpi_ac_init+0x0/0x45 @ 1 initcall acpi_ac_init+0x0/0x45 returned 0 after 43 usecs calling acpi_button_init+0x0/0x56 @ 1 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0x56 returned 0 after 58960 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 11 usecs calling acpi_pci_slot_init+0x0/0x20 @ 1 initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 119 usecs calling acpi_processor_init+0x0/0x133 @ 1 ACPI: acpi_idle registered with cpuidle initcall acpi_processor_init+0x0/0x133 returned 0 after 13824 usecs calling acpi_container_init+0x0/0x42 @ 1 initcall acpi_container_init+0x0/0x42 returned 0 after 1061 usecs calling acpi_thermal_init+0x0/0x7b @ 1 initcall acpi_thermal_init+0x0/0x7b returned 0 after 20 usecs calling acpi_memory_device_init+0x0/0x7a @ 1 initcall acpi_memory_device_init+0x0/0x7a returned 0 after 1021 usecs calling acpi_battery_init+0x0/0x16 @ 1 initcall acpi_battery_init+0x0/0x16 returned 0 after 2 usecs calling 1_acpi_battery_init_async+0x0/0x3c @ 108 initcall 1_acpi_battery_init_async+0x0/0x3c returned 0 after 32 usecs calling acpi_hed_init+0x0/0x28 @ 1 initcall acpi_hed_init+0x0/0x28 returned 0 after 17 usecs calling erst_init+0x0/0x2c8 @ 1 ERST: Table is not found! initcall erst_init+0x0/0x2c8 returned 0 after 8552 usecs calling ghes_init+0x0/0x11a @ 1 GHES: HEST is not enabled! initcall ghes_init+0x0/0x11a returned -22 after 8809 usecs initcall ghes_init+0x0/0x11a returned with error code -22 calling xenbus_probe_initcall+0x0/0x25 @ 1 initcall xenbus_probe_initcall+0x0/0x25 returned -19 after 0 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs calling hyper_sysfs_init+0x0/0xfb @ 1 initcall hyper_sysfs_init+0x0/0xfb returned -19 after 0 usecs calling platform_pci_module_init+0x0/0x38 @ 1 initcall platform_pci_module_init+0x0/0x38 returned 0 after 10 usecs calling rand_initialize+0x0/0x40 @ 1 initcall rand_initialize+0x0/0x40 returned 0 after 8 usecs calling tty_init+0x0/0xfa @ 1 initcall tty_init+0x0/0xfa returned 0 after 782 usecs calling pty_init+0x0/0x345 @ 1 initcall pty_init+0x0/0x345 returned 0 after 19 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 2 usecs calling xen_init+0x0/0x93 @ 1 initcall xen_init+0x0/0x93 returned -19 after 0 usecs calling raw_init+0x0/0xe5 @ 1 initcall raw_init+0x0/0xe5 returned 0 after 26 usecs calling hpet_init+0x0/0x6a @ 1 initcall hpet_init+0x0/0x6a returned 0 after 66 usecs calling nvram_init+0x0/0x82 @ 1 Non-volatile memory driver v1.3 initcall nvram_init+0x0/0x82 returned 0 after 10105 usecs calling agp_init+0x0/0x26 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x26 returned 0 after 9826 usecs calling agp_intel_init+0x0/0x29 @ 1 initcall agp_intel_init+0x0/0x29 returned 0 after 14 usecs calling agp_sis_init+0x0/0x29 @ 1 initcall agp_sis_init+0x0/0x29 returned 0 after 10 usecs calling agp_via_init+0x0/0x29 @ 1 initcall agp_via_init+0x0/0x29 returned 0 after 11 usecs calling init_tis+0x0/0x8e @ 1 initcall init_tis+0x0/0x8e returned 0 after 12 usecs calling crash_init+0x0/0x46 @ 1 crash memory driver: version 1.1 initcall crash_init+0x0/0x46 returned 0 after 10386 usecs calling cn_proc_init+0x0/0x3d @ 1 initcall cn_proc_init+0x0/0x3d returned 0 after 0 usecs calling serial8250_init+0x0/0x153 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled async_waiting @ 1 async_continuing @ 1 after 0 usec async_waiting @ 1 async_continuing @ 1 after 0 usec ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A initcall serial8250_init+0x0/0x153 returned 0 after 303962 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A initcall serial8250_pnp_init+0x0/0x12 returned 0 after 14311 usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after 25 usecs calling init_kgdboc+0x0/0x16 @ 1 initcall init_kgdboc+0x0/0x16 returned 0 after 0 usecs calling topology_sysfs_init+0x0/0x5f @ 1 initcall topology_sysfs_init+0x0/0x5f returned 0 after 24 usecs calling brd_init+0x0/0x173 @ 1 brd: module loaded initcall brd_init+0x0/0x173 returned 0 after 7610 usecs calling loop_init+0x0/0x1a0 @ 1 loop: module loaded initcall loop_init+0x0/0x1a0 returned 0 after 7454 usecs calling init_kgdbts+0x0/0x16 @ 1 initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs calling mac_hid_init+0x0/0x8e @ 1 input: Macintosh mouse button emulation as /devices/virtual/input/input2 initcall mac_hid_init+0x0/0x8e returned 0 after 20521 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 0 usecs calling init_mtd+0x0/0x5e @ 1 initcall init_mtd+0x0/0x5e returned 0 after 7 usecs calling cmdline_parser_init+0x0/0x12 @ 1 initcall cmdline_parser_init+0x0/0x12 returned 0 after 0 usecs calling fixed_mdio_bus_init+0x0/0xf4 @ 1 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xf4 returned 0 after 7795 usecs calling net_olddevs_init+0x0/0x9f @ 1 initcall net_olddevs_init+0x0/0x9f returned 0 after 2 usecs calling mon_init+0x0/0x100 @ 1 initcall mon_init+0x0/0x100 returned 0 after 26 usecs calling ehci_hcd_init+0x0/0xbf @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround QUIRK: Enable AMD PLL fix ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe4fe400 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe4fe800 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:16.2: debug port 1 ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe4fec00 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 ehci_hcd usb usb3: SerialNumber: 0000:00:16.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected initcall ehci_hcd_init+0x0/0xbf returned 0 after 726509 usecs calling ohci_hcd_mod_init+0x0/0x90 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe4f7000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 ohci_hcd usb usb4: SerialNumber: 0000:00:12.0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe4fc000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe4fd000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 ohci_hcd usb usb6: SerialNumber: 0000:00:14.5 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe4ff000 usb 5-1: new full speed USB device number 2 using ohci_hcd usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 ohci_hcd usb usb7: SerialNumber: 0000:00:16.0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 4 ports detected initcall ohci_hcd_mod_init+0x0/0x90 returned 0 after 937748 usecs usb 5-1: New USB device found, idVendor=046d, idProduct=c52e usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB Receiver usb 5-1: Manufacturer: Logitech usb 5-1: configuration #1 chosen from 1 choice calling uhci_hcd_init+0x0/0xca @ 1 uhci_hcd: USB Universal Host Controller Interface driver initcall uhci_hcd_init+0x0/0xca returned 0 after 16510 usecs calling i8042_init+0x0/0x3bb @ 1 PNP: No PS/2 controller found. Probing ports directly. drivers/input/serio/i8042.c: 20 -> i8042 (command) [17] drivers/input/serio/i8042.c: 47 <- i8042 (return) [33] drivers/input/serio/i8042.c: 20 -> i8042 (command) [50] drivers/input/serio/i8042.c: 47 <- i8042 (return) [66] drivers/input/serio/i8042.c: 60 -> i8042 (command) [83] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [99] drivers/input/serio/i8042.c: d3 -> i8042 (command) [116] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [133] drivers/input/serio/i8042.c: 5a <- i8042 (return) [150] drivers/input/serio/i8042.c: a7 -> i8042 (command) [167] drivers/input/serio/i8042.c: 20 -> i8042 (command) [184] drivers/input/serio/i8042.c: 76 <- i8042 (return) [201] drivers/input/serio/i8042.c: a8 -> i8042 (command) [217] drivers/input/serio/i8042.c: 20 -> i8042 (command) [234] drivers/input/serio/i8042.c: 56 <- i8042 (return) [251] drivers/input/serio/i8042.c: 60 -> i8042 (command) [268] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [269] drivers/input/serio/i8042.c: d3 -> i8042 (command) [302] drivers/input/serio/i8042.c: a5 -> i8042 (parameter) [309] drivers/input/serio/i8042.c: a5 <- i8042 (aux_test_irq, aux) [336] drivers/input/serio/i8042.c: 60 -> i8042 (command) [355] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [355] drivers/input/serio/i8042.c: d3 -> i8042 (command) [390] drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [406] drivers/input/serio/i8042.c: f0 <- i8042 (return) [424] drivers/input/serio/i8042.c: d3 -> i8042 (command) [440] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [440] drivers/input/serio/i8042.c: 56 <- i8042 (return) [440] drivers/input/serio/i8042.c: d3 -> i8042 (command) [440] drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [508] drivers/input/serio/i8042.c: a4 <- i8042 (return) [525] drivers/input/serio/i8042.c: Interrupt 12, without any data [542] drivers/input/serio/i8042.c: 60 -> i8042 (command) [561] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [561] drivers/input/serio/i8042.c: Interrupt 1, without any data [595] drivers/input/serio/i8042.c: 60 -> i8042 (command) [614] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [614] serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x3bb returned 0 after 657457 usecs calling serport_init+0x0/0x34 @ 1 initcall serport_init+0x0/0x34 returned 0 after 3 usecs calling mousedev_init+0x0/0x61 @ 1 mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x61 returned 0 after 13174 usecs calling evdev_init+0x0/0x12 @ 1 initcall evdev_init+0x0/0x12 returned 0 after 42 usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 15 usecs drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [799] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 0, 1, timeout) [817] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [817] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 0, 1, timeout) [835] drivers/input/serio/i8042.c: 60 -> i8042 (command) [835] drivers/input/serio/i8042.c: 46 -> i8042 (parameter) [835] drivers/input/serio/i8042.c: 60 -> i8042 (command) [835] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [835] drivers/input/serio/i8042.c: d4 -> i8042 (command) [835] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [835] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 1, 12, timeout) [854] drivers/input/serio/i8042.c: d4 -> i8042 (command) [854] drivers/input/serio/i8042.c: ed -> i8042 (parameter) [854] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 1, 12, timeout) [872] drivers/input/serio/i8042.c: 60 -> i8042 (command) [872] drivers/input/serio/i8042.c: 45 -> i8042 (parameter) [872] drivers/input/serio/i8042.c: 60 -> i8042 (command) [872] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [872] calling psmouse_init+0x0/0x6f @ 1 initcall psmouse_init+0x0/0x6f returned 0 after 71 usecs drivers/input/serio/i8042.c: d4 -> i8042 (command) [1151] drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [1151] drivers/input/serio/i8042.c: fe <- i8042 (interrupt, 1, 12, timeout) [1171] drivers/input/serio/i8042.c: 60 -> i8042 (command) [1171] drivers/input/serio/i8042.c: 45 -> i8042 (parameter) [1171] drivers/input/serio/i8042.c: 60 -> i8042 (command) [1171] drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [1171] calling xenkbd_init+0x0/0x4c @ 1 initcall xenkbd_init+0x0/0x4c returned -19 after 3 usecs calling cmos_init+0x0/0x6a @ 1 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs initcall cmos_init+0x0/0x6a returned 0 after 44834 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 9927 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 9516 usecs calling efivars_init+0x0/0xf6 @ 1 EFI Variables Facility v0.08 2004-May-17 initcall efivars_init+0x0/0xf6 returned 0 after 12375 usecs calling hid_init+0x0/0x66 @ 1 HID: hid_debug is now used solely for parser and driver debugging. HID: debugfs is now used for inspecting the device (report descriptor, reports) initcall hid_init+0x0/0x66 returned 0 after 41231 usecs calling a4_init+0x0/0x1b @ 1 initcall a4_init+0x0/0x1b returned 0 after 7 usecs calling apple_init+0x0/0x38 @ 1 initcall apple_init+0x0/0x38 returned 0 after 8 usecs calling belkin_init+0x0/0x1b @ 1 initcall belkin_init+0x0/0x1b returned 0 after 5 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 4 usecs calling ch_init+0x0/0x1b @ 1 initcall ch_init+0x0/0x1b returned 0 after 6 usecs calling cp_init+0x0/0x1b @ 1 initcall cp_init+0x0/0x1b returned 0 after 5 usecs calling dr_init+0x0/0x1b @ 1 initcall dr_init+0x0/0x1b returned 0 after 5 usecs calling ez_init+0x0/0x1b @ 1 initcall ez_init+0x0/0x1b returned 0 after 5 usecs calling gyration_init+0x0/0x1b @ 1 initcall gyration_init+0x0/0x1b returned 0 after 5 usecs calling ks_init+0x0/0x1b @ 1 initcall ks_init+0x0/0x1b returned 0 after 5 usecs calling kye_init+0x0/0x1b @ 1 initcall kye_init+0x0/0x1b returned 0 after 6 usecs calling lg_init+0x0/0x1b @ 1 initcall lg_init+0x0/0x1b returned 0 after 5 usecs calling ms_init+0x0/0x1b @ 1 initcall ms_init+0x0/0x1b returned 0 after 5 usecs calling mr_init+0x0/0x1b @ 1 initcall mr_init+0x0/0x1b returned 0 after 5 usecs calling ntrig_init+0x0/0x1b @ 1 initcall ntrig_init+0x0/0x1b returned 0 after 5 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 6 usecs calling pl_init+0x0/0x1b @ 1 initcall pl_init+0x0/0x1b returned 0 after 5 usecs calling samsung_init+0x0/0x1b @ 1 initcall samsung_init+0x0/0x1b returned 0 after 5 usecs calling sjoy_init+0x0/0x1b @ 1 initcall sjoy_init+0x0/0x1b returned 0 after 5 usecs calling sony_init+0x0/0x1b @ 1 initcall sony_init+0x0/0x1b returned 0 after 5 usecs calling sp_init+0x0/0x1b @ 1 initcall sp_init+0x0/0x1b returned 0 after 5 usecs calling ga_init+0x0/0x1b @ 1 initcall ga_init+0x0/0x1b returned 0 after 6 usecs calling tm_init+0x0/0x1b @ 1 initcall tm_init+0x0/0x1b returned 0 after 5 usecs calling ts_init+0x0/0x1b @ 1 initcall ts_init+0x0/0x1b returned 0 after 6 usecs calling twinhan_init+0x0/0x1b @ 1 initcall twinhan_init+0x0/0x1b returned 0 after 5 usecs calling zp_init+0x0/0x1b @ 1 initcall zp_init+0x0/0x1b returned 0 after 16 usecs calling hid_init+0x0/0xc8 @ 1 usbcore: registered new interface driver hiddev drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 0 drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Set_Report wValue=0x0200 wIndex=0x0000 wLength=1 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input3 generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-1/input0 drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 1 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input4 generic-usb 0003:046D:C52E.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver initcall hid_init+0x0/0xc8 returned 0 after 236446 usecs calling staging_init+0x0/0x8 @ 1 initcall staging_init+0x0/0x8 returned 0 after 0 usecs calling flow_cache_init+0x0/0x1af @ 1 initcall flow_cache_init+0x0/0x1af returned 0 after 100 usecs calling init_cgroup_netprio+0x0/0x14 @ 1 initcall init_cgroup_netprio+0x0/0x14 returned 0 after 1 usecs calling blackhole_module_init+0x0/0x12 @ 1 initcall blackhole_module_init+0x0/0x12 returned 0 after 0 usecs calling init_cgroup_cls+0x0/0x12 @ 1 initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs calling xt_init+0x0/0x121 @ 1 initcall xt_init+0x0/0x121 returned 0 after 10 usecs calling tcpudp_mt_init+0x0/0x17 @ 1 initcall tcpudp_mt_init+0x0/0x17 returned 0 after 1 usecs calling sysctl_ipv4_init+0x0/0x8d @ 1 initcall sysctl_ipv4_init+0x0/0x8d returned 0 after 6 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 16 usecs calling ipv4_netfilter_init+0x0/0x20 @ 1 initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs calling cubictcp_register+0x0/0x5c @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x5c returned 0 after 7287 usecs calling xfrm_user_init+0x0/0x4a @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4a returned 0 after 10352 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 10815 usecs calling dsa_init_module+0x0/0x14 @ 1 initcall dsa_init_module+0x0/0x14 returned 0 after 0 usecs calling edsa_init_module+0x0/0x14 @ 1 initcall edsa_init_module+0x0/0x14 returned 0 after 0 usecs calling trailer_init_module+0x0/0x14 @ 1 initcall trailer_init_module+0x0/0x14 returned 0 after 0 usecs calling mv88e6060_init+0x0/0x14 @ 1 initcall mv88e6060_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6123_61_65_init+0x0/0x14 @ 1 initcall mv88e6123_61_65_init+0x0/0x14 returned 0 after 0 usecs calling mv88e6131_init+0x0/0x14 @ 1 initcall mv88e6131_init+0x0/0x14 returned 0 after 0 usecs calling dsa_init_module+0x0/0x12 @ 1 initcall dsa_init_module+0x0/0x12 returned 0 after 8 usecs calling dcbnl_init+0x0/0x47 @ 1 initcall dcbnl_init+0x0/0x47 returned 0 after 0 usecs calling tboot_late_init+0x0/0x20a @ 1 initcall tboot_late_init+0x0/0x20a returned 0 after 0 usecs calling mcheck_debugfs_init+0x0/0x3c @ 1 initcall mcheck_debugfs_init+0x0/0x3c returned 0 after 26 usecs calling severities_debugfs_init+0x0/0x3c @ 1 initcall severities_debugfs_init+0x0/0x3c returned 0 after 1 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 usecs calling update_mp_table+0x0/0x62b @ 1 initcall update_mp_table+0x0/0x62b returned 0 after 0 usecs calling lapic_insert_resource+0x0/0x3f @ 1 initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling pat_memtype_list_init+0x0/0x29 @ 1 initcall pat_memtype_list_init+0x0/0x29 returned 0 after 2 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 1 usecs calling init_oops_id+0x0/0x40 @ 1 initcall init_oops_id+0x0/0x40 returned 0 after 1 usecs calling disable_boot_consoles+0x0/0x44 @ 1 initcall disable_boot_consoles+0x0/0x44 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0xdf @ 1 initcall pm_qos_power_init+0x0/0xdf returned 0 after 46 usecs calling software_resume+0x0/0x340 @ 1 initcall software_resume+0x0/0x340 returned -2 after 0 usecs initcall software_resume+0x0/0x340 returned with error code -2 calling debugfs_kprobe_init+0x0/0x90 @ 1 initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 5 usecs calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 9824 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling set_recommended_min_free_kbytes+0x0/0xa0 @ 1 initcall set_recommended_min_free_kbytes+0x0/0xa0 returned 0 after 615 usecs calling init_ima+0x0/0x20 @ 1 initcall init_ima+0x0/0x20 returned 0 after 0 usecs calling random32_reseed+0x0/0xb6 @ 1 initcall random32_reseed+0x0/0xb6 returned 0 after 18 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 1 usecs calling pci_sysfs_init+0x0/0x51 @ 1 initcall pci_sysfs_init+0x0/0x51 returned 0 after 354 usecs calling boot_wait_for_devices+0x0/0x30 @ 1 initcall boot_wait_for_devices+0x0/0x30 returned 0 after 0 usecs calling regulator_init_complete+0x0/0x135 @ 1 initcall regulator_init_complete+0x0/0x135 returned 0 after 0 usecs calling random_int_secret_init+0x0/0x19 @ 1 initcall random_int_secret_init+0x0/0x19 returned 0 after 7 usecs calling scsi_complete_async_scans+0x0/0x120 @ 1 initcall scsi_complete_async_scans+0x0/0x120 returned 0 after 0 usecs calling rtc_hctosys+0x0/0x177 @ 1 rtc_cmos 00:04: setting system clock to 2013-02-13 17:59:40 UTC (1360778380) initcall rtc_hctosys+0x0/0x177 returned 0 after 21586 usecs calling memmap_init+0x0/0x9d @ 1 initcall memmap_init+0x0/0x9d returned 0 after 20 usecs calling pci_mmcfg_late_insert_resources+0x0/0x164 @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x164 returned 0 after 1 usecs calling net_secret_init+0x0/0x19 @ 1 initcall net_secret_init+0x0/0x19 returned 0 after 8 usecs calling init_net_drop_monitor+0x0/0x155 @ 1 Initalizing network drop monitor service initcall init_net_drop_monitor+0x0/0x155 returned 0 after 12379 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 1 usecs async_waiting @ 1 async_continuing @ 1 after 0 usec Freeing unused kernel memory: 1252k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1052k freed Freeing unused kernel memory: 1732k freed dracut: dracut-004-284.el6_3.1 dracut: rd_NO_LUKS: removing cryptoluks activation calling dm_init+0x0/0x48 [dm_mod] @ 147 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com initcall dm_init+0x0/0x48 [dm_mod] returned 0 after 35904 usecs calling dm_dirty_log_init+0x0/0x59 [dm_log] @ 149 initcall dm_dirty_log_init+0x0/0x59 [dm_log] returned 0 after 0 usecs calling dm_mirror_init+0x0/0x7a [dm_mirror] @ 149 initcall dm_mirror_init+0x0/0x7a [dm_mirror] returned 0 after 53 usecs Not running on Xudev: starting version 147 en. calling i2c_init+0x0/0x75 [i2c_core] @ 161 initcall i2c_init+0x0/0x75 [i2c_core] returned 0 after 24 usecs calling drm_core_init+0x0/0x13e [drm] @ 161 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x13e [drm] returned 0 after 11398 usecs calling ttm_init+0x0/0x62 [ttm] @ 161 initcall ttm_init+0x0/0x62 [ttm] returned 0 after 18 usecs calling radeon_init+0x0/0xee [radeon] @ 161 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm:drm_pci_init], [drm:drm_get_pci_dev], alloc irq_desc for 32 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-8 -> 0x89 -> IRQ 32 Mode:1 Active:1) radeon 0000:03:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 radeon 0000:03:00.0: setting latency timer to 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 64 [drm:drm_get_minor], [drm:drm_get_minor], new minor assigned 0 [drm] initializing kernel modesetting (RV770 0x1002:0x9442 0x1787:0x2266). [drm] register mmio base: 0xFE6F0000 [drm] register mmio size: 65536 [drm:radeon_get_bios], ATOMBIOS detected ATOM BIOS: RV770 [drm:atom_allocate_fb_scratch], atom firmware requested 0007ffec 20kb radeon 0000:03:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) radeon 0000:03:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [drm] Detected VRAM RAM=512M, BAR=256M [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 8124394 kiB. [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [TTM] Initializing pool allocator. [TTM] Initializing DMA pool allocator. [drm] radeon: 512M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. alloc irq_desc for 57 on node 0 alloc kstat_irqs on node 0 radeon 0000:03:00.0: irq 57 for MSI/MSI-X radeon 0000:03:00.0: radeon: using MSI. [drm:drm_irq_install], irq=57 [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm:r600_init_microcode], [drm] Loading RV770 Microcode platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin r600_cp: Failed to load firmware "radeon/R700_rlc.bin" [drm:rv770_startup] *ERROR* Failed to load firmware! radeon 0000:03:00.0: disabling GPU acceleration radeon 0000:03:00.0: ffff8804292fe400 unpin not necessary [drm:drm_irq_uninstall], irq=57 radeon 0000:03:00.0: ffff8804291a0400 unpin not necessary radeon 0000:03:00.0: ffff8804291a0400 unpin not necessary [drm:drm_sysfs_connector_add], adding "HDMI-A-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "DP-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "DVI-I-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm:drm_sysfs_connector_add], adding "DIN-1" to sysfs [drm:drm_sysfs_hotplug_event], generating hotplug event [drm] Radeon Display Connectors [drm] Connector 0: [drm] HDMI-A [drm] HPD1 [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] Connector 1: [drm] DisplayPort [drm] HPD3 [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY [drm] Connector 2: [drm] DVI-I [drm] HPD2 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP3: INTERNAL_KLDSCP_LVTMA [drm] Connector 3: [drm] DIN [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xD0040000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 fbcon: radeondrmfb (fb0) is primary device [drm:drm_calc_timestamping_constants], crtc 10: hwmode: htotal 2200, vtotal 1125, vdisplay 1080 [drm:drm_calc_timestamping_constants], crtc 10: clock 148500 kHz framedur 16665750 linedur 14814, pixeldur 6 Console: switching to colour frame buffer device 240x67 fb0: radeondrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [drm] Initialized radeon 2.13.0 20080528 for 0000:03:00.0 on minor 0 initcall radeon_init+0x0/0xee [radeon] returned 0 after 1628465 usecs dracut: Starting plymouth daemon [drm:drm_stub_open], [drm:drm_open_helper], pid = 217, minor = 0 [drm:drm_setup], [drm:drm_ioctl], pid=217, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [drm:drm_release], open_count = 1 [drm:drm_release], pid = 217, device = 0xe200, open_count = 1 [drm:drm_lastclose], [drm:drm_lastclose], driver lastclose completed [drm:drm_lastclose], lastclose completed [drm:drm_stub_open], [drm:drm_open_helper], pid = 217, minor = 0 [drm:drm_setup], [drm:drm_ioctl], pid=217, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [drm:drm_release], open_count = 1 [drm:drm_release], pid = 217, device = 0xe200, open_count = 1 [drm:drm_lastclose], [drm:drm_lastclose], driver lastclose completed [drm:drm_lastclose], lastclose completed [drm:drm_stub_open], [drm:drm_open_helper], pid = 217, minor = 0 [drm:drm_setup], [drm:drm_ioctl], pid=217, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc06864a1, nr=0xa1, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_ioctl], pid=217, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [drm:drm_release], open_count = 1 [drm:drm_release], pid = 217, device = 0xe200, open_count = 1 [drm:drm_lastclose], [drm:drm_lastclose], driver lastclose completed [drm:drm_lastclose], lastclose completed dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation calling ahci_init+0x0/0x20 [ahci] @ 316 ahci 0000:00:11.0: version 3.0 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 IOAPIC[0]: Set routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1) ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe4fe000 port 0xfe4fe100 irq 19 ata2: SATA max UDMA/133 abar m1024@0xfe4fe000 port 0xfe4fe180 irq 19 ata3: SATA max UDMA/133 abar m1024@0xfe4fe000 port 0xfe4fe200 irq 19 ata4: SATA max UDMA/133 abar m1024@0xfe4fe000 port 0xfe4fe280 irq 19 alloc irq_desc for 44 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-20 -> 0xa1 -> IRQ 44 Mode:1 Active:1) ahci 0000:06:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 ahci 0000:06:00.0: JMB361 has only one port, port_map 0x3 -> 0x1 ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:06:00.0: setting latency timer to 64 scsi4 : ahci scsi5 : ahci ata5: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 44 ata6: DUMMY initcall ahci_init+0x0/0x20 [ahci] returned 0 after 83770 usecs ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) calling jmicron_init+0x0/0x20 [pata_jmicron] @ 371 pata_jmicron 0000:06:00.1: enabling device (0000 -> 0001) alloc irq_desc for 45 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-21 -> 0xa9 -> IRQ 45 Mode:1 Active:1) pata_jmicron 0000:06:00.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45 pata_jmicron 0000:06:00.1: setting latency timer to 64 scsi6 : pata_jmicron scsi7 : pata_jmicron ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 45 ata8: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 45 initcall jmicron_init+0x0/0x20 [pata_jmicron] returned 0 after 152700 usecs calling ata_generic_init+0x0/0x20 [ata_generic] @ 371 initcall ata_generic_init+0x0/0x20 [ata_generic] returned 0 after 136 usecs calling pacpi_init+0x0/0x20 [pata_acpi] @ 371 pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pata_acpi 0000:00:14.1: setting latency timer to 64 initcall pacpi_init+0x0/0x20 [pata_acpi] returned 0 after 36196 usecs calling atiixp_init+0x0/0x20 [pata_atiixp] @ 379 scsi8 : pata_atiixp scsi9 : pata_atiixp ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 initcall atiixp_init+0x0/0x20 [pata_atiixp] returned 0 after 55130 usecs calling twa_init+0x0/0x35 [3w_9xxx] @ 430 3ware 9000 Storage Controller device driver for Linux v2.26.02.014RH. alloc irq_desc for 40 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-16 -> 0xb1 -> IRQ 40 Mode:1 Active:1) 3w-9xxx 0000:02:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 3w-9xxx 0000:02:00.0: setting latency timer to 64 3w-9xxx: scsi10: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:. scsi10 : 3ware 9000 Storage Controller 3w-9xxx: scsi10: Found a 3ware 9000 Storage Controller at 0xfe5ff000, IRQ: 40. 3w-9xxx: scsi10: Firmware FE9X 4.08.00.006, BIOS BE9X 4.08.00.001, Ports: 4. initcall twa_init+0x0/0x35 [3w_9xxx] returned 0 after 1374623 usecs scsi 10:0:0:0: Direct-Access AMCC 9650SE-4LP DISK 4.08 PQ: 0 ANSI: 5 calling init_sd+0x0/0x169 [sd_mod] @ 458 initcall init_sd+0x0/0x169 [sd_mod] returned 0 after 139 usecs sd 10:0:0:0: [sda] 2929625088 512-byte logical blocks: (1.49 TB/1.36 TiB) sd 10:0:0:0: [sda] Write Protect is off sd 10:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 10:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 10:0:0:0: [sda] Attached SCSI disk calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 494 initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 1 usecs dracut: Scanning devices sda2 sda3 for LVM logical volumes vg_titan_raid5/lv_titan_root vg_titan_raid5/lv_titan_swap dracut: inactive '/dev/vg_titan_raid5/lv_titan_root' [5.00 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_titan_swap' [2.00 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_titan_log' [1.00 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_titan_var' [2.00 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_titan_tmp' [1.00 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_titan_home' [2.00 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_template.hvm' [13.50 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_vm_ganymede' [13.50 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_vm_io' [13.50 GiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_vm_dione' [1.00 TiB] inherit dracut: inactive '/dev/vg_titan_raid5/lv_vm_deimos' [13.50 GiB] inherit calling journal_init+0x0/0xb8 [jbd2] @ 527 initcall journal_init+0x0/0xb8 [jbd2] returned 0 after 171 usecs calling init_mbcache+0x0/0x14 [mbcache] @ 527 initcall init_mbcache+0x0/0x14 [mbcache] returned 0 after 1 usecs calling init_ext4_fs+0x0/0x1a8 [ext4] @ 527 initcall init_ext4_fs+0x0/0x1a8 [ext4] returned 0 after 220 usecs EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/mapper/vg_titan_raid5-lv_titan_root SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1360778388.405:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead-collector: starting udev: starting version 147 calling shpcd_init+0x0/0x67 [shpchp] @ 802 shpchp: shpcd_init: pci_register_driver = 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0x67 [shpchp] returned 0 after 33487 usecs calling i2c_piix4_init+0x0/0x20 [i2c_piix4] @ 819 ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [io 0xb00-0xb2f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver initcall i2c_piix4_init+0x0/0x20 [i2c_piix4] returned 0 after 60090 usecs calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 830 initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 13 usecs calling init_soundcore+0x0/0x9b [soundcore] @ 830 initcall init_soundcore+0x0/0x9b [soundcore] returned 0 after 13 usecs calling alsa_sound_init+0x0/0x87 [snd] @ 830 initcall alsa_sound_init+0x0/0x87 [snd] returned 0 after 12 usecs calling alsa_timer_init+0x0/0x16f [snd_timer] @ 830 initcall alsa_timer_init+0x0/0x16f [snd_timer] returned 0 after 70 usecs calling alsa_pcm_init+0x0/0x71 [snd_pcm] @ 853 initcall alsa_pcm_init+0x0/0x71 [snd_pcm] returned 0 after 2 usecs calling alsa_seq_device_init+0x0/0x60 [snd_seq_device] @ 854 initcall alsa_seq_device_init+0x0/0x60 [snd_seq_device] returned 0 after 3 usecs calling alsa_seq_init+0x0/0x4c [snd_seq] @ 854 initcall alsa_seq_init+0x0/0x4c [snd_seq] returned 0 after 42 usecs calling alsa_hwdep_init+0x0/0x69 [snd_hwdep] @ 830 initcall alsa_hwdep_init+0x0/0x69 [snd_hwdep] returned 0 after 3 usecs calling alsa_card_azx_init+0x0/0x20 [snd_hda_intel] @ 830 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 IOAPIC[0]: Set routing entry (6-16 -> 0xb9 -> IRQ 16 Mode:1 Active:1) snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 calling patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] @ 858 initcall patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] returned 0 after 0 usecs input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 alloc irq_desc for 33 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-9 -> 0xc1 -> IRQ 33 Mode:1 Active:1) snd_hda_intel 0000:03:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33 snd_hda_intel 0000:03:00.1: irq 57 for MSI/MSI-X snd_hda_intel 0000:03:00.1: setting latency timer to 64 calling patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] @ 862 initcall patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] returned 0 after 0 usecs HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:03:00.1/sound/card1/input13 initcall alsa_card_azx_init+0x0/0x20 [snd_hda_intel] returned 0 after 581186 usecs calling mce_amd_init+0x0/0x178 [edac_mce_amd] @ 868 MCE: In-kernel MCE decoding enabled. initcall mce_amd_init+0x0/0x178 [edac_mce_amd] returned 0 after 12624 usecs calling edac_init+0x0/0x6a [edac_core] @ 868 EDAC MC: Ver: 2.1.0 Feb 6 2013 initcall edac_init+0x0/0x6a [edac_core] returned 0 after 11490 usecs calling amd64_edac_init+0x0/0x1b1 [amd64_edac_mod] @ 868 AMD64 EDAC driver v3.4.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) initcall amd64_edac_init+0x0/0x1b1 [amd64_edac_mod] returned -19 after 92926 usecs calling k10temp_init+0x0/0x20 [k10temp] @ 871 initcall k10temp_init+0x0/0x20 [k10temp] returned 0 after 146 usecs calling serio_raw_init+0x0/0x20 [serio_raw] @ 876 initcall serio_raw_init+0x0/0x20 [serio_raw] returned 0 after 13 usecs calling microcode_init+0x0/0x13e [microcode] @ 880 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: CPU0: patch_level=0x10000bf microcode: CPU0: updated (new patch_level=0x10000dc) microcode: CPU1: patch_level=0x10000bf microcode: CPU1: updated (new patch_level=0x10000dc) microcode: CPU2: patch_level=0x10000bf microcode: CPU2: updated (new patch_level=0x10000dc) microcode: CPU3: patch_level=0x10000bf microcode: CPU3: updated (new patch_level=0x10000dc) microcode: CPU4: patch_level=0x10000bf microcode: CPU4: updated (new patch_level=0x10000dc) microcode: CPU5: patch_level=0x10000bf microcode: CPU5: updated (new patch_level=0x10000dc) Microcode Update Driver: v2.00 , Peter Oruba initcall microcode_init+0x0/0x13e [microcode] returned 0 after 284452 usecs calling rtl8169_init_module+0x0/0x20 [r8169] @ 910 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded alloc irq_desc for 51 on node 0 alloc kstat_irqs on node 0 IOAPIC[1]: Set routing entry (7-27 -> 0xd1 -> IRQ 51 Mode:1 Active:1) r8169 0000:05:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 r8169 0000:05:00.0: setting latency timer to 64 alloc irq_desc for 58 on node 0 alloc kstat_irqs on node 0 r8169 0000:05:00.0: irq 58 for MSI/MSI-X r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900127d6000, 48:5b:39:b5:b9:f1, XID 0c100000 IRQ 58 r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] initcall rtl8169_init_module+0x0/0x20 [r8169] returned 0 after 187283 usecs calling xhci_hcd_init+0x0/0x2c [xhci_hcd] @ 912 xhci_hcd 0000:04:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 xhci_hcd 0000:04:00.0: setting latency timer to 64 xhci_hcd 0000:04:00.0: xHCI Host Controller xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 xhci_hcd 0000:04:00.0: irq 50, io mem 0xfe7fe000 alloc irq_desc for 59 on node 0 alloc kstat_irqs on node 0 xhci_hcd 0000:04:00.0: irq 59 for MSI/MSI-X alloc irq_desc for 60 on node 0 alloc kstat_irqs on node 0 xhci_hcd 0000:04:00.0: irq 60 for MSI/MSI-X alloc irq_desc for 61 on node 0 alloc kstat_irqs on node 0 xhci_hcd 0000:04:00.0: irq 61 for MSI/MSI-X alloc irq_desc for 62 on node 0 alloc kstat_irqs on node 0 xhci_hcd 0000:04:00.0: irq 62 for MSI/MSI-X alloc irq_desc for 63 on node 0 alloc kstat_irqs on node 0 xhci_hcd 0000:04:00.0: irq 63 for MSI/MSI-X alloc irq_desc for 64 on node 0 alloc kstat_irqs on node 0 xhci_hcd 0000:04:00.0: irq 64 for MSI/MSI-X alloc irq_desc for 65 on node 0 alloc kstat_irqs on node 0 xhci_hcd 0000:04:00.0: irq 65 for MSI/MSI-X usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: xHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 xhci_hcd usb usb8: SerialNumber: 0000:04:00.0 usb usb8: configuration #1 chosen from 1 choice xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected xhci_hcd 0000:04:00.0: xHCI Host Controller xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9 usb usb9: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb9: Product: xHCI Host Controller usb usb9: Manufacturer: Linux 2.6.32-279.22.1.el6.x86_64 xhci_hcd usb usb9: SerialNumber: 0000:04:00.0 usb usb9: configuration #1 chosen from 1 choice xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 9-0:1.0: USB hub found hub 9-0:1.0: 2 ports detected initcall xhci_hcd_init+0x0/0x2c [xhci_hcd] returned 0 after 706088 usecs calling init_sg+0x0/0x127 [sg] @ 921 sd 10:0:0:0: Attached scsi generic sg0 type 0 initcall init_sg+0x0/0x127 [sg] returned 0 after 14749 usecs calling atk0110_init+0x0/0x32 [asus_atk0110] @ 981 ATK0110 ATK0110:00: EC enabled initcall atk0110_init+0x0/0x32 [asus_atk0110] returned 0 after 14660 usecs calling wait_scan_init+0x0/0x12 [scsi_wait_scan] @ 1020 initcall wait_scan_init+0x0/0x12 [scsi_wait_scan] returned 0 after 15 usecs EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: calling dm_crypt_init+0x0/0x6a [dm_crypt] @ 1157 initcall dm_crypt_init+0x0/0x6a [dm_crypt] returned 0 after 80 usecs calling crypto_cbc_module_init+0x0/0x12 [cbc] @ 1164 initcall crypto_cbc_module_init+0x0/0x12 [cbc] returned 0 after 8 usecs calling serpent_mod_init+0x0/0x3f [serpent] @ 1166 initcall serpent_mod_init+0x0/0x3f [serpent] returned 0 after 212 usecs alg: No test for cbc(serpent) (cbc(serpent-generic)) calling sha256_generic_mod_init+0x0/0x3f [sha256_generic] @ 1178 initcall sha256_generic_mod_init+0x0/0x3f [sha256_generic] returned 0 after 260 usecs calling init_ext2_fs+0x0/0x77 [ext2] @ 1204 initcall init_ext2_fs+0x0/0x77 [ext2] returned 0 after 106 usecs Adding 2097144k swap on /dev/mapper/vg_titan_raid5-lv_titan_swap-crypt. Priority:-1 extents:1 across:2097144k calling ip_tables_init+0x0/0xb0 [ip_tables] @ 1305 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0xb0 [ip_tables] returned 0 after 14798 usecs calling iptable_filter_init+0x0/0x69 [iptable_filter] @ 1307 initcall iptable_filter_init+0x0/0x69 [iptable_filter] returned 0 after 14 usecs calling nf_conntrack_standalone_init+0x0/0x12 [nf_conntrack] @ 1309 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) initcall nf_conntrack_standalone_init+0x0/0x12 [nf_conntrack] returned 0 after 17207 usecs calling state_mt_init+0x0/0x17 [xt_state] @ 1309 initcall state_mt_init+0x0/0x17 [xt_state] returned 0 after 1 usecs calling nf_defrag_init+0x0/0x17 [nf_defrag_ipv4] @ 1311 initcall nf_defrag_init+0x0/0x17 [nf_defrag_ipv4] returned 0 after 1 usecs calling nf_conntrack_l3proto_ipv4_init+0x0/0x12d [nf_conntrack_ipv4] @ 1311 initcall nf_conntrack_l3proto_ipv4_init+0x0/0x12d [nf_conntrack_ipv4] returned 0 after 6 usecs calling inet6_init+0x0/0x33f [ipv6] @ 1324 NET: Registered protocol family 10 lo: Disabled Privacy Extensions initcall inet6_init+0x0/0x33f [ipv6] returned 0 after 24517 usecs calling llc_init+0x0/0x20 [llc] @ 1397 initcall llc_init+0x0/0x20 [llc] returned 0 after 5 usecs calling br_init+0x0/0xda [bridge] @ 1397 Bridge firewalling registered initcall br_init+0x0/0xda [bridge] returned 0 after 11080 usecs r8169 0000:05:00.0: firmware: requesting rtl_nic/rtl8168e-1.fw r8169 0000:05:00.0: eth0: link down r8169 0000:05:00.0: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready device eth0 entered promiscuous mode r8169 0000:05:00.0: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready xenbr0: port 1(eth0) entering learning state calling pcc_cpufreq_init+0x0/0x4ca [pcc_cpufreq] @ 1518 initcall pcc_cpufreq_init+0x0/0x4ca [pcc_cpufreq] returned -19 after 8 usecs calling powernowk8_init+0x0/0x1c6 [powernow_k8] @ 1522 powernow-k8: Found 1 AMD Phenom(tm) II X6 1045T Processor (6 cpu cores) (version 2.20.00) powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2700 MHz) powernow-k8: 1 : pstate 1 (2000 MHz) powernow-k8: 2 : pstate 2 (1400 MHz) powernow-k8: 3 : pstate 3 (800 MHz) initcall powernowk8_init+0x0/0x1c6 [powernow_k8] returned 0 after 96243 usecs calling cpufreq_gov_dbs_init+0x0/0xac [cpufreq_ondemand] @ 1526 initcall cpufreq_gov_dbs_init+0x0/0xac [cpufreq_ondemand] returned 0 after 241 usecs calling init_sunrpc+0x0/0x6d [sunrpc] @ 1607 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x6d [sunrpc] returned 0 after 60327 usecs xenbr0: no IPv6 routers present eth0: no IPv6 routers present xenbr0: port 1(eth0) entering forwarding state calling init_autofs4_fs+0x0/0x26 [autofs4] @ 1751 initcall init_autofs4_fs+0x0/0x26 [autofs4] returned 0 after 45 usecs CentOS release 6.3 (Final) Kernel 2.6.32-279.22.1.el6.x86_64 on an x86_64 titan.pado.net.pl login: