##################################################### # smartctl -x /dev/sda (WD black md1) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD2002FAEX-007BA0 Serial Number: WD-WMAY04715499 Firmware Version: 05.01D05 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:29 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (30300) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 8150 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 29 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 49 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 27 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 120 096 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 24 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 23/32 Celsius Lifetime Min/Max Temperature: 23/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (132) Index Estimated Time Temperature Celsius 133 2012-06-21 13:29 38 ******************* ... ..(292 skipped). .. ******************* 426 2012-06-21 18:22 38 ******************* 427 2012-06-21 18:23 ? - 428 2012-06-21 18:24 31 ************ 429 2012-06-21 18:25 32 ************* ... ..( 2 skipped). .. ************* 432 2012-06-21 18:28 32 ************* 433 2012-06-21 18:29 33 ************** 434 2012-06-21 18:30 33 ************** 435 2012-06-21 18:31 34 *************** ... ..( 2 skipped). .. *************** 438 2012-06-21 18:34 34 *************** 439 2012-06-21 18:35 35 **************** ... ..( 10 skipped). .. **************** 450 2012-06-21 18:46 35 **************** 451 2012-06-21 18:47 36 ***************** ... ..( 7 skipped). .. ***************** 459 2012-06-21 18:55 36 ***************** 460 2012-06-21 18:56 ? - 461 2012-06-21 18:57 37 ****************** 462 2012-06-21 18:58 ? - 463 2012-06-21 18:59 31 ************ 464 2012-06-21 19:00 32 ************* 465 2012-06-21 19:01 32 ************* 466 2012-06-21 19:02 32 ************* 467 2012-06-21 19:03 33 ************** 468 2012-06-21 19:04 33 ************** 469 2012-06-21 19:05 33 ************** 470 2012-06-21 19:06 34 *************** 471 2012-06-21 19:07 34 *************** 472 2012-06-21 19:08 34 *************** 473 2012-06-21 19:09 35 **************** ... ..( 12 skipped). .. **************** 8 2012-06-21 19:22 35 **************** 9 2012-06-21 19:23 36 ***************** ... ..( 18 skipped). .. ***************** 28 2012-06-21 19:42 36 ***************** 29 2012-06-21 19:43 37 ****************** ... ..( 51 skipped). .. ****************** 81 2012-06-21 20:35 37 ****************** 82 2012-06-21 20:36 ? - 83 2012-06-21 20:37 23 **** 84 2012-06-21 20:38 24 ***** 85 2012-06-21 20:39 25 ****** 86 2012-06-21 20:40 25 ****** 87 2012-06-21 20:41 26 ******* 88 2012-06-21 20:42 26 ******* 89 2012-06-21 20:43 26 ******* 90 2012-06-21 20:44 27 ******** 91 2012-06-21 20:45 28 ********* 92 2012-06-21 20:46 28 ********* 93 2012-06-21 20:47 29 ********** ... ..( 3 skipped). .. ********** 97 2012-06-21 20:51 29 ********** 98 2012-06-21 20:52 30 *********** ... ..( 2 skipped). .. *********** 101 2012-06-21 20:55 30 *********** 102 2012-06-21 20:56 31 ************ ... ..( 4 skipped). .. ************ 107 2012-06-21 21:01 31 ************ 108 2012-06-21 21:02 32 ************* ... ..( 23 skipped). .. ************* 132 2012-06-21 21:26 32 ************* Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2954 Vendor specific ##################################################### # smartctl -x /dev/sdb (WD black md1) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD2002FAEX-007BA0 Serial Number: WD-WMAY04595242 Firmware Version: 05.01D05 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:29 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (31380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 6466 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 50 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 48 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 49 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 48 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 120 091 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 24 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 22/32 Celsius Lifetime Min/Max Temperature: 22/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (158) Index Estimated Time Temperature Celsius 159 2012-06-21 13:29 39 ******************** ... ..(292 skipped). .. ******************** 452 2012-06-21 18:22 39 ******************** 453 2012-06-21 18:23 ? - 454 2012-06-21 18:24 32 ************* ... ..( 2 skipped). .. ************* 457 2012-06-21 18:27 32 ************* 458 2012-06-21 18:28 33 ************** 459 2012-06-21 18:29 33 ************** 460 2012-06-21 18:30 34 *************** 461 2012-06-21 18:31 34 *************** 462 2012-06-21 18:32 34 *************** 463 2012-06-21 18:33 35 **************** ... ..( 11 skipped). .. **************** 475 2012-06-21 18:45 35 **************** 476 2012-06-21 18:46 36 ***************** ... ..( 8 skipped). .. ***************** 7 2012-06-21 18:55 36 ***************** 8 2012-06-21 18:56 ? - 9 2012-06-21 18:57 37 ****************** 10 2012-06-21 18:58 ? - 11 2012-06-21 18:59 32 ************* 12 2012-06-21 19:00 32 ************* 13 2012-06-21 19:01 32 ************* 14 2012-06-21 19:02 33 ************** 15 2012-06-21 19:03 33 ************** 16 2012-06-21 19:04 34 *************** 17 2012-06-21 19:05 34 *************** 18 2012-06-21 19:06 34 *************** 19 2012-06-21 19:07 35 **************** ... ..( 11 skipped). .. **************** 31 2012-06-21 19:19 35 **************** 32 2012-06-21 19:20 36 ***************** ... ..( 10 skipped). .. ***************** 43 2012-06-21 19:31 36 ***************** 44 2012-06-21 19:32 37 ****************** ... ..( 30 skipped). .. ****************** 75 2012-06-21 20:03 37 ****************** 76 2012-06-21 20:04 38 ******************* ... ..( 30 skipped). .. ******************* 107 2012-06-21 20:35 38 ******************* 108 2012-06-21 20:36 ? - 109 2012-06-21 20:37 22 *** 110 2012-06-21 20:38 23 **** 111 2012-06-21 20:39 23 **** 112 2012-06-21 20:40 25 ****** 113 2012-06-21 20:41 25 ****** 114 2012-06-21 20:42 25 ****** 115 2012-06-21 20:43 26 ******* 116 2012-06-21 20:44 26 ******* 117 2012-06-21 20:45 26 ******* 118 2012-06-21 20:46 27 ******** 119 2012-06-21 20:47 28 ********* 120 2012-06-21 20:48 28 ********* 121 2012-06-21 20:49 29 ********** ... ..( 4 skipped). .. ********** 126 2012-06-21 20:54 29 ********** 127 2012-06-21 20:55 30 *********** ... ..( 3 skipped). .. *********** 131 2012-06-21 20:59 30 *********** 132 2012-06-21 21:00 31 ************ ... ..( 7 skipped). .. ************ 140 2012-06-21 21:08 31 ************ 141 2012-06-21 21:09 32 ************* ... ..( 16 skipped). .. ************* 158 2012-06-21 21:26 32 ************* Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2955 Vendor specific ##################################################### # smartctl -x /dev/sdc (WD black md1) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD2002FAEX-007BA0 Serial Number: WD-WMAY04711467 Firmware Version: 05.01D05 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:29 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (30300) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 6925 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 43 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 48 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 42 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 41 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 119 091 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 24 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 23/33 Celsius Lifetime Min/Max Temperature: 23/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (144) Index Estimated Time Temperature Celsius 145 2012-06-21 13:29 40 ********************* ... ..(292 skipped). .. ********************* 438 2012-06-21 18:22 40 ********************* 439 2012-06-21 18:23 ? - 440 2012-06-21 18:24 33 ************** 441 2012-06-21 18:25 33 ************** 442 2012-06-21 18:26 33 ************** 443 2012-06-21 18:27 34 *************** 444 2012-06-21 18:28 34 *************** 445 2012-06-21 18:29 35 **************** ... ..( 5 skipped). .. **************** 451 2012-06-21 18:35 35 **************** 452 2012-06-21 18:36 36 ***************** ... ..( 3 skipped). .. ***************** 456 2012-06-21 18:40 36 ***************** 457 2012-06-21 18:41 37 ****************** ... ..( 5 skipped). .. ****************** 463 2012-06-21 18:47 37 ****************** 464 2012-06-21 18:48 38 ******************* ... ..( 6 skipped). .. ******************* 471 2012-06-21 18:55 38 ******************* 472 2012-06-21 18:56 ? - 473 2012-06-21 18:57 39 ******************** 474 2012-06-21 18:58 ? - 475 2012-06-21 18:59 33 ************** 476 2012-06-21 19:00 33 ************** 477 2012-06-21 19:01 34 *************** 0 2012-06-21 19:02 34 *************** 1 2012-06-21 19:03 35 **************** ... ..( 5 skipped). .. **************** 7 2012-06-21 19:09 35 **************** 8 2012-06-21 19:10 36 ***************** ... ..( 4 skipped). .. ***************** 13 2012-06-21 19:15 36 ***************** 14 2012-06-21 19:16 37 ****************** ... ..( 5 skipped). .. ****************** 20 2012-06-21 19:22 37 ****************** 21 2012-06-21 19:23 38 ******************* ... ..( 12 skipped). .. ******************* 34 2012-06-21 19:36 38 ******************* 35 2012-06-21 19:37 39 ******************** ... ..( 57 skipped). .. ******************** 93 2012-06-21 20:35 39 ******************** 94 2012-06-21 20:36 ? - 95 2012-06-21 20:37 23 **** 96 2012-06-21 20:38 24 ***** 97 2012-06-21 20:39 25 ****** 98 2012-06-21 20:40 25 ****** 99 2012-06-21 20:41 26 ******* 100 2012-06-21 20:42 26 ******* 101 2012-06-21 20:43 27 ******** 102 2012-06-21 20:44 27 ******** 103 2012-06-21 20:45 28 ********* 104 2012-06-21 20:46 29 ********** ... ..( 3 skipped). .. ********** 108 2012-06-21 20:50 29 ********** 109 2012-06-21 20:51 30 *********** 110 2012-06-21 20:52 30 *********** 111 2012-06-21 20:53 30 *********** 112 2012-06-21 20:54 31 ************ ... ..( 2 skipped). .. ************ 115 2012-06-21 20:57 31 ************ 116 2012-06-21 20:58 32 ************* ... ..( 21 skipped). .. ************* 138 2012-06-21 21:20 32 ************* 139 2012-06-21 21:21 33 ************** ... ..( 4 skipped). .. ************** 144 2012-06-21 21:26 33 ************** Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2955 Vendor specific ##################################################### # smartctl -x /dev/sdd (WD black md1) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD2002FAEX-007BA0 Serial Number: WD-WMAY04711495 Firmware Version: 05.01D05 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:29 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (30660) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 6725 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 52 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 48 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 50 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 120 097 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 24 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 23/32 Celsius Lifetime Min/Max Temperature: 23/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (168) Index Estimated Time Temperature Celsius 169 2012-06-21 13:29 39 ******************** ... ..(112 skipped). .. ******************** 282 2012-06-21 15:22 39 ******************** 283 2012-06-21 15:23 38 ******************* ... ..(178 skipped). .. ******************* 462 2012-06-21 18:22 38 ******************* 463 2012-06-21 18:23 ? - 464 2012-06-21 18:24 31 ************ 465 2012-06-21 18:25 31 ************ 466 2012-06-21 18:26 32 ************* 467 2012-06-21 18:27 32 ************* 468 2012-06-21 18:28 32 ************* 469 2012-06-21 18:29 33 ************** 470 2012-06-21 18:30 33 ************** 471 2012-06-21 18:31 33 ************** 472 2012-06-21 18:32 34 *************** ... ..( 2 skipped). .. *************** 475 2012-06-21 18:35 34 *************** 476 2012-06-21 18:36 35 **************** ... ..( 10 skipped). .. **************** 9 2012-06-21 18:47 35 **************** 10 2012-06-21 18:48 36 ***************** ... ..( 6 skipped). .. ***************** 17 2012-06-21 18:55 36 ***************** 18 2012-06-21 18:56 ? - 19 2012-06-21 18:57 37 ****************** 20 2012-06-21 18:58 ? - 21 2012-06-21 18:59 31 ************ 22 2012-06-21 19:00 31 ************ 23 2012-06-21 19:01 32 ************* 24 2012-06-21 19:02 32 ************* 25 2012-06-21 19:03 32 ************* 26 2012-06-21 19:04 33 ************** 27 2012-06-21 19:05 33 ************** 28 2012-06-21 19:06 34 *************** ... ..( 2 skipped). .. *************** 31 2012-06-21 19:09 34 *************** 32 2012-06-21 19:10 35 **************** ... ..( 9 skipped). .. **************** 42 2012-06-21 19:20 35 **************** 43 2012-06-21 19:21 36 ***************** ... ..( 11 skipped). .. ***************** 55 2012-06-21 19:33 36 ***************** 56 2012-06-21 19:34 37 ****************** ... ..( 26 skipped). .. ****************** 83 2012-06-21 20:01 37 ****************** 84 2012-06-21 20:02 38 ******************* ... ..( 32 skipped). .. ******************* 117 2012-06-21 20:35 38 ******************* 118 2012-06-21 20:36 ? - 119 2012-06-21 20:37 23 **** 120 2012-06-21 20:38 23 **** 121 2012-06-21 20:39 24 ***** 122 2012-06-21 20:40 25 ****** 123 2012-06-21 20:41 25 ****** 124 2012-06-21 20:42 26 ******* 125 2012-06-21 20:43 26 ******* 126 2012-06-21 20:44 26 ******* 127 2012-06-21 20:45 27 ******** 128 2012-06-21 20:46 28 ********* 129 2012-06-21 20:47 28 ********* 130 2012-06-21 20:48 29 ********** ... ..( 4 skipped). .. ********** 135 2012-06-21 20:53 29 ********** 136 2012-06-21 20:54 30 *********** ... ..( 2 skipped). .. *********** 139 2012-06-21 20:57 30 *********** 140 2012-06-21 20:58 31 ************ ... ..( 5 skipped). .. ************ 146 2012-06-21 21:04 31 ************ 147 2012-06-21 21:05 32 ************* ... ..( 20 skipped). .. ************* 168 2012-06-21 21:26 32 ************* Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2955 Vendor specific ##################################################### # smartctl -x /dev/sde (Samsung md2) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F2 EG series Device Model: SAMSUNG HD154UI Serial Number: S1XWJ9AS800055 Firmware Version: 1AG01118 User Capacity: 1,500,301,910,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Thu Jun 21 21:26:30 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19367) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 34) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 063 063 011 Pre-fail Always - 11810 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3134 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 20772 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 381 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 082 061 000 Old_age Always - 18 (Lifetime Min/Max 14/18) 194 Temperature_Celsius 0x0022 080 061 000 Old_age Always - 20 (Lifetime Min/Max 14/20) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2759026 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 2 sectors [Ext. Comprehensive SMART error log] GP Log at address 0x04 has 2 sectors [Device Statistics] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 2 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP Log at address 0x20 has 2 sectors [Streaming performance log] GP Log at address 0x21 has 1 sectors [Write stream error log] GP Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 20 Celsius Power Cycle Max Temperature: 20 Celsius Lifetime Max Temperature: 40 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (17) Index Estimated Time Temperature Celsius 18 2012-06-21 19:19 23 **** ... ..( 7 skipped). .. **** 26 2012-06-21 19:27 23 **** 27 2012-06-21 19:28 24 ***** ... ..( 62 skipped). .. ***** 90 2012-06-21 20:31 24 ***** 91 2012-06-21 20:32 14 - 92 2012-06-21 20:33 15 - 93 2012-06-21 20:34 15 - 94 2012-06-21 20:35 16 - 95 2012-06-21 20:36 16 - 96 2012-06-21 20:37 16 - 97 2012-06-21 20:38 17 - ... ..( 2 skipped). .. - 100 2012-06-21 20:41 17 - 101 2012-06-21 20:42 18 - ... ..( 4 skipped). .. - 106 2012-06-21 20:47 18 - 107 2012-06-21 20:48 19 - ... ..( 13 skipped). .. - 121 2012-06-21 21:02 19 - 122 2012-06-21 21:03 20 * ... ..( 22 skipped). .. * 17 2012-06-21 21:26 20 * Error SMART WRITE LOG does not return COUNT and LBA_LOW register Warning: device does not support SCT (Get) Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC ##################################################### # smartctl -x /dev/sdf (Samsung md2) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F2 EG series Device Model: SAMSUNG HD154UI Serial Number: S1XWJ1KSC07338 Firmware Version: 1AG01118 User Capacity: 1,500,301,910,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Thu Jun 21 21:26:30 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19358) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 34) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 063 063 011 Pre-fail Always - 11700 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 2870 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 19798 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 266 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 13 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 080 061 000 Old_age Always - 20 (Lifetime Min/Max 17/20) 194 Temperature_Celsius 0x0022 077 061 000 Old_age Always - 23 (Lifetime Min/Max 17/23) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2848502 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 2 sectors [Ext. Comprehensive SMART error log] GP Log at address 0x04 has 2 sectors [Device Statistics] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 2 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP Log at address 0x20 has 2 sectors [Streaming performance log] GP Log at address 0x21 has 1 sectors [Write stream error log] GP Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 6 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 [5] occurred at disk power-on lifetime: 18490 hours (770 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 65 f9 ff ce e0 00 Error: UNC at LBA = 0x65f9ffce = 1710882766 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 65 f9 ff 00 e0 08 1d+05:12:01.390 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:12:01.390 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 1d+05:12:01.380 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 1d+05:12:01.380 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:12:01.380 READ NATIVE MAX ADDRESS EXT Error 5 [4] occurred at disk power-on lifetime: 18490 hours (770 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 65 f9 ff cd e0 00 Error: UNC at LBA = 0x65f9ffcd = 1710882765 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 65 f9 ff 00 e0 08 1d+05:11:58.000 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:58.000 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 1d+05:11:58.000 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 1d+05:11:58.000 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:58.000 READ NATIVE MAX ADDRESS EXT Error 4 [3] occurred at disk power-on lifetime: 18490 hours (770 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 65 f9 ff cd e0 00 Error: UNC at LBA = 0x65f9ffcd = 1710882765 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 65 f9 ff 00 e0 08 1d+05:11:54.500 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:54.500 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 1d+05:11:54.490 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 1d+05:11:54.490 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:54.490 READ NATIVE MAX ADDRESS EXT Error 3 [2] occurred at disk power-on lifetime: 18490 hours (770 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 65 f9 ff ce e0 00 Error: UNC at LBA = 0x65f9ffce = 1710882766 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 65 f9 ff 00 e0 08 1d+05:11:49.380 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:49.380 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 1d+05:11:49.370 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 1d+05:11:49.370 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:49.370 READ NATIVE MAX ADDRESS EXT Error 2 [1] occurred at disk power-on lifetime: 18490 hours (770 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 65 f9 ff cd e0 00 Error: UNC at LBA = 0x65f9ffcd = 1710882765 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 65 f9 ff 00 e0 08 1d+05:11:45.260 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:45.260 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 1d+05:11:45.250 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 1d+05:11:45.250 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+05:11:45.250 READ NATIVE MAX ADDRESS EXT Error 1 [0] occurred at disk power-on lifetime: 18490 hours (770 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 65 f9 ff ce e0 00 Error: UNC at LBA = 0x65f9ffce = 1710882766 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 65 f9 ff 00 e0 08 1d+05:11:41.210 READ DMA EXT 25 00 00 01 00 00 00 65 f9 fe 00 e0 08 1d+05:11:41.210 READ DMA EXT 25 00 00 03 00 00 00 65 f9 fb 00 e0 08 1d+05:11:41.200 READ DMA EXT 25 00 00 01 00 00 00 65 f9 fa 00 e0 08 1d+05:11:41.200 READ DMA EXT 25 00 00 04 00 00 00 65 f9 f6 00 e0 08 1d+05:11:41.200 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 23 Celsius Power Cycle Max Temperature: 23 Celsius Lifetime Max Temperature: 47 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (85) Index Estimated Time Temperature Celsius 86 2012-06-21 19:19 26 ******* ... ..( 19 skipped). .. ******* 106 2012-06-21 19:39 26 ******* 107 2012-06-21 19:40 27 ******** ... ..( 50 skipped). .. ******** 30 2012-06-21 20:31 27 ******** 31 2012-06-21 20:32 17 - 32 2012-06-21 20:33 17 - 33 2012-06-21 20:34 18 - 34 2012-06-21 20:35 18 - 35 2012-06-21 20:36 18 - 36 2012-06-21 20:37 19 - 37 2012-06-21 20:38 19 - 38 2012-06-21 20:39 19 - 39 2012-06-21 20:40 20 * ... ..( 3 skipped). .. * 43 2012-06-21 20:44 20 * 44 2012-06-21 20:45 21 ** ... ..( 7 skipped). .. ** 52 2012-06-21 20:53 21 ** 53 2012-06-21 20:54 22 *** ... ..( 20 skipped). .. *** 74 2012-06-21 21:15 22 *** 75 2012-06-21 21:16 23 **** 76 2012-06-21 21:17 23 **** 77 2012-06-21 21:18 22 *** 78 2012-06-21 21:19 23 **** ... ..( 6 skipped). .. **** 85 2012-06-21 21:26 23 **** Error SMART WRITE LOG does not return COUNT and LBA_LOW register Warning: device does not support SCT (Get) Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC ##################################################### # smartctl -x /dev/sdg (Samsung md2) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F2 EG series Device Model: SAMSUNG HD154UI Serial Number: S1XWJ1KSC07340 Firmware Version: 1AG01118 User Capacity: 1,500,301,910,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Thu Jun 21 21:26:30 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19303) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 34) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 064 064 011 Pre-fail Always - 11690 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 2857 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 19724 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 266 13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 30 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 081 061 000 Old_age Always - 19 (Lifetime Min/Max 16/19) 194 Temperature_Celsius 0x0022 078 060 000 Old_age Always - 22 (Lifetime Min/Max 16/22) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1503901 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 2 sectors [Ext. Comprehensive SMART error log] GP Log at address 0x04 has 2 sectors [Device Statistics] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 2 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP Log at address 0x20 has 2 sectors [Streaming performance log] GP Log at address 0x21 has 1 sectors [Write stream error log] GP Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 16 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 16 [7] occurred at disk power-on lifetime: 18442 hours (768 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7b 73 0a 4b e0 00 Error: UNC at LBA = 0x7b730a4b = 2071136843 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 7b 73 0a 00 e0 08 2d+05:55:52.680 READ DMA EXT 25 00 00 01 00 00 00 7b 73 09 00 e0 08 2d+05:55:52.680 READ DMA EXT 25 00 00 02 00 00 00 7b 73 07 00 e0 08 2d+05:55:52.670 READ DMA EXT 25 00 00 04 00 00 00 7b 73 03 00 e0 08 2d+05:55:52.670 READ DMA EXT 25 00 00 01 00 00 00 7b 73 02 00 e0 08 2d+05:55:52.670 READ DMA EXT Error 15 [6] occurred at disk power-on lifetime: 18399 hours (766 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 57 55 3d ad e0 00 Error: UNC at LBA = 0x57553dad = 1465204141 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 28 00 00 57 55 3c 08 e0 08 11:02:19.070 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 11:02:19.070 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 11:02:19.060 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 11:02:19.060 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 11:02:19.050 READ NATIVE MAX ADDRESS EXT Error 14 [5] occurred at disk power-on lifetime: 18399 hours (766 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 57 55 3d ad e0 00 Error: UNC at LBA = 0x57553dad = 1465204141 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 28 00 00 57 55 3c 08 e0 08 11:02:15.960 READ DMA EXT 25 00 00 00 08 00 00 57 55 3c 00 e0 08 11:02:15.920 READ DMA EXT 35 00 00 00 56 00 00 57 55 3a f2 e0 08 11:02:15.910 WRITE DMA EXT 35 00 00 00 01 00 00 57 55 3a 5f e0 08 11:02:15.910 WRITE DMA EXT 35 00 00 00 01 00 00 57 55 3a 3f e0 08 11:02:15.910 WRITE DMA EXT Error 13 [4] occurred at disk power-on lifetime: 14922 hours (621 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7b 4d 1d ce e0 00 Error: UNC at LBA = 0x7b4d1dce = 2068651470 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 7b 4d 1d 80 e0 08 28d+06:29:54.360 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:54.360 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 28d+06:29:54.350 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 28d+06:29:54.350 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:54.350 READ NATIVE MAX ADDRESS EXT Error 12 [3] occurred at disk power-on lifetime: 14922 hours (621 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7b 4d 1d ce e0 00 Error: UNC at LBA = 0x7b4d1dce = 2068651470 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 7b 4d 1d 80 e0 08 28d+06:29:51.520 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:51.510 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 28d+06:29:51.510 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 28d+06:29:51.510 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:51.510 READ NATIVE MAX ADDRESS EXT Error 11 [2] occurred at disk power-on lifetime: 14922 hours (621 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7b 4d 1d d0 e0 00 Error: UNC at LBA = 0x7b4d1dd0 = 2068651472 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 7b 4d 1d 80 e0 08 28d+06:29:46.790 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:46.790 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 28d+06:29:46.780 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 28d+06:29:46.780 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:46.780 READ NATIVE MAX ADDRESS EXT Error 10 [1] occurred at disk power-on lifetime: 14922 hours (621 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7b 4d 1d ce e0 00 Error: UNC at LBA = 0x7b4d1dce = 2068651470 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 7b 4d 1d 80 e0 08 28d+06:29:43.010 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:43.010 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 28d+06:29:43.000 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 28d+06:29:43.000 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:43.000 READ NATIVE MAX ADDRESS EXT Error 9 [0] occurred at disk power-on lifetime: 14922 hours (621 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7b 4d 1d d0 e0 00 Error: UNC at LBA = 0x7b4d1dd0 = 2068651472 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 7b 4d 1d 80 e0 08 28d+06:29:36.360 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:36.360 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 28d+06:29:36.350 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 28d+06:29:36.340 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 28d+06:29:36.340 READ NATIVE MAX ADDRESS EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Max Temperature: 22 Celsius Lifetime Max Temperature: 47 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (17) Index Estimated Time Temperature Celsius 18 2012-06-21 19:19 25 ****** ... ..( 7 skipped). .. ****** 26 2012-06-21 19:27 25 ****** 27 2012-06-21 19:28 26 ******* ... ..( 62 skipped). .. ******* 90 2012-06-21 20:31 26 ******* 91 2012-06-21 20:32 16 - 92 2012-06-21 20:33 16 - 93 2012-06-21 20:34 17 - 94 2012-06-21 20:35 17 - 95 2012-06-21 20:36 18 - ... ..( 2 skipped). .. - 98 2012-06-21 20:39 18 - 99 2012-06-21 20:40 19 - ... ..( 3 skipped). .. - 103 2012-06-21 20:44 19 - 104 2012-06-21 20:45 20 * ... ..( 5 skipped). .. * 110 2012-06-21 20:51 20 * 111 2012-06-21 20:52 21 ** ... ..( 19 skipped). .. ** 3 2012-06-21 21:12 21 ** 4 2012-06-21 21:13 22 *** ... ..( 12 skipped). .. *** 17 2012-06-21 21:26 22 *** Error SMART WRITE LOG does not return COUNT and LBA_LOW register Warning: device does not support SCT (Get) Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC ##################################################### # smartctl -x /dev/sdh (Samsung md2) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F2 EG series Device Model: SAMSUNG HD154UI Serial Number: S1XWJ1KSC07339 Firmware Version: 1AG01118 User Capacity: 1,500,301,910,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Thu Jun 21 21:26:30 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18899) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 33) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 063 063 011 Pre-fail Always - 11730 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 2778 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 19719 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 256 13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 116 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 081 063 000 Old_age Always - 19 (Lifetime Min/Max 16/19) 194 Temperature_Celsius 0x0022 078 062 000 Old_age Always - 22 (Lifetime Min/Max 16/22) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 98706 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 2 sectors [Ext. Comprehensive SMART error log] GP Log at address 0x04 has 2 sectors [Device Statistics] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 2 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP Log at address 0x20 has 2 sectors [Streaming performance log] GP Log at address 0x21 has 1 sectors [Write stream error log] GP Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 60 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 60 [3] occurred at disk power-on lifetime: 18444 hours (768 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7f 53 99 41 e0 00 Error: UNC at LBA = 0x7f539941 = 2136185153 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 30 00 00 7f 53 98 08 e0 08 2d+12:51:43.900 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+12:51:43.900 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 2d+12:51:43.890 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 2d+12:51:43.890 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+12:51:43.880 READ NATIVE MAX ADDRESS EXT Error 59 [2] occurred at disk power-on lifetime: 18444 hours (768 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7f 53 99 45 e0 00 Error: UNC at LBA = 0x7f539945 = 2136185157 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 30 00 00 7f 53 98 08 e0 08 2d+12:51:40.600 READ DMA EXT 25 00 00 00 08 00 00 7f 53 98 00 e0 08 2d+12:51:40.580 READ DMA EXT 35 00 00 02 27 00 00 7f 53 95 0a e0 08 2d+12:51:40.580 WRITE DMA EXT 35 00 00 00 01 00 00 7f 53 94 e7 e0 08 2d+12:51:40.580 WRITE DMA EXT 35 00 00 00 01 00 00 7f 53 94 cf e0 08 2d+12:51:40.580 WRITE DMA EXT Error 58 [1] occurred at disk power-on lifetime: 18439 hours (768 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7f cd 82 19 e0 00 Error: UNC at LBA = 0x7fcd8219 = 2144174617 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 7f cd 81 00 e0 08 2d+07:42:59.060 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+07:42:59.060 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 2d+07:42:59.060 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 2d+07:42:59.060 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+07:42:59.040 READ NATIVE MAX ADDRESS EXT Error 57 [0] occurred at disk power-on lifetime: 18439 hours (768 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7f cd 82 19 e0 00 Error: UNC at LBA = 0x7fcd8219 = 2144174617 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 7f cd 81 00 e0 08 2d+07:42:55.530 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+07:42:55.530 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 00 00 00 00 a0 08 2d+07:42:55.520 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 2d+07:42:55.520 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+07:42:55.500 READ NATIVE MAX ADDRESS EXT Error 56 [7] occurred at disk power-on lifetime: 18439 hours (768 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7f cd 82 19 e0 00 Error: UNC at LBA = 0x7fcd8219 = 2144174617 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 7f cd 81 00 e0 08 2d+07:42:52.620 READ DMA EXT 25 00 00 01 00 00 00 7f cd 80 00 e0 08 2d+07:42:52.620 READ DMA EXT 25 00 00 03 00 00 00 7f cd 7d 00 e0 08 2d+07:42:52.600 READ DMA EXT 25 00 00 01 00 00 00 7f cd 7c 00 e0 08 2d+07:42:52.600 READ DMA EXT 25 00 00 04 00 00 00 7f cd 78 00 e0 08 2d+07:42:52.590 READ DMA EXT Error 55 [6] occurred at disk power-on lifetime: 18398 hours (766 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 2a e0 2a 40 e0 00 Error: UNC at LBA = 0x2ae02a40 = 719333952 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 2a e0 2a 40 e0 08 14:44:22.280 READ DMA EXT 25 00 00 00 70 00 00 28 55 44 78 e0 08 14:44:22.280 READ DMA EXT 25 00 00 00 08 00 00 15 78 66 40 e0 08 14:44:22.250 READ DMA EXT c8 00 00 00 08 00 00 00 e4 6a 80 ea 08 14:44:22.250 READ DMA c8 00 00 00 48 00 00 00 03 a0 80 e0 08 14:44:22.240 READ DMA Error 54 [5] occurred at disk power-on lifetime: 17993 hours (749 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 7f cd 82 19 e0 00 Error: UNC at LBA = 0x7fcd8219 = 2144174617 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 7f cd 7f 00 e0 08 44d+13:54:08.870 READ DMA EXT 25 00 00 04 00 00 00 7f cd 7b 00 e0 08 44d+13:54:08.870 READ DMA EXT 25 00 00 04 00 00 00 7f cd 77 00 e0 08 44d+13:54:08.860 READ DMA EXT 25 00 00 01 00 00 00 7f cd 76 00 e0 08 44d+13:54:08.860 READ DMA EXT 25 00 00 03 00 00 00 7f cd 73 00 e0 08 44d+13:54:08.860 READ DMA EXT Error 53 [4] occurred at disk power-on lifetime: 17214 hours (717 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 2b 00 d5 01 e0 00 Error: UNC at LBA = 0x2b00d501 = 721474817 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 00 2b 00 d5 00 e0 08 12d+02:16:58.660 READ DMA EXT 25 00 00 00 08 00 00 2b 00 93 20 e0 08 12d+02:16:58.490 READ DMA EXT 25 00 00 00 28 00 00 2c d5 86 58 e0 08 12d+02:16:58.360 READ DMA EXT 25 00 00 00 08 00 00 2c d5 d2 78 e0 08 12d+02:16:58.350 READ DMA EXT 25 00 00 00 08 00 00 2b 00 93 18 e0 08 12d+02:16:58.350 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Max Temperature: 22 Celsius Lifetime Max Temperature: 46 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (17) Index Estimated Time Temperature Celsius 18 2012-06-21 19:19 25 ****** ... ..( 15 skipped). .. ****** 34 2012-06-21 19:35 25 ****** 35 2012-06-21 19:36 26 ******* ... ..( 54 skipped). .. ******* 90 2012-06-21 20:31 26 ******* 91 2012-06-21 20:32 16 - 92 2012-06-21 20:33 17 - 93 2012-06-21 20:34 18 - ... ..( 3 skipped). .. - 97 2012-06-21 20:38 18 - 98 2012-06-21 20:39 19 - ... ..( 2 skipped). .. - 101 2012-06-21 20:42 19 - 102 2012-06-21 20:43 20 * ... ..( 5 skipped). .. * 108 2012-06-21 20:49 20 * 109 2012-06-21 20:50 21 ** ... ..( 15 skipped). .. ** 125 2012-06-21 21:06 21 ** 126 2012-06-21 21:07 22 *** ... ..( 18 skipped). .. *** 17 2012-06-21 21:26 22 *** Error SMART WRITE LOG does not return COUNT and LBA_LOW register Warning: device does not support SCT (Get) Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC ##################################################### # smartctl -x /dev/sdi (WD green mythtv-recordings) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WCAZA1793361 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:31 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (35700) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 253 223 021 Pre-fail Always - 1091 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 309 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 12640 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 296 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 183 193 Load_Cycle_Count 0x0032 187 187 000 Old_age Always - 41968 194 Temperature_Celsius 0x0022 124 108 000 Old_age Always - 26 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 93 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 26/26 Celsius Lifetime Min/Max Temperature: 23/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (194) Index Estimated Time Temperature Celsius 195 2012-06-21 13:29 23 **** 196 2012-06-21 13:30 23 **** 197 2012-06-21 13:31 23 **** 198 2012-06-21 13:32 24 ***** ... ..( 3 skipped). .. ***** 202 2012-06-21 13:36 24 ***** 203 2012-06-21 13:37 25 ****** ... ..( 5 skipped). .. ****** 209 2012-06-21 13:43 25 ****** 210 2012-06-21 13:44 26 ******* ... ..( 4 skipped). .. ******* 215 2012-06-21 13:49 26 ******* 216 2012-06-21 13:50 ? - 217 2012-06-21 13:51 26 ******* ... ..( 48 skipped). .. ******* 266 2012-06-21 14:40 26 ******* 267 2012-06-21 14:41 30 *********** ... ..( 44 skipped). .. *********** 312 2012-06-21 15:26 30 *********** 313 2012-06-21 15:27 29 ********** ... ..( 23 skipped). .. ********** 337 2012-06-21 15:51 29 ********** 338 2012-06-21 15:52 28 ********* ... ..( 90 skipped). .. ********* 429 2012-06-21 17:23 28 ********* 430 2012-06-21 17:24 27 ******** ... ..( 13 skipped). .. ******** 444 2012-06-21 17:38 27 ******** 445 2012-06-21 17:39 26 ******* ... ..(217 skipped). .. ******* 185 2012-06-21 21:17 26 ******* 186 2012-06-21 21:18 27 ******** 187 2012-06-21 21:19 ? - 188 2012-06-21 21:20 23 **** ... ..( 5 skipped). .. **** 194 2012-06-21 21:26 23 **** Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2959 Vendor specific ##################################################### # smartctl -x /dev/sdj (WD green md3) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00J99B0 Serial Number: WD-WCAWZ0908872 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:31 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (34200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 166 149 021 Pre-fail Always - 8700 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 92 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6503 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 90 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 80 193 Load_Cycle_Count 0x0032 137 137 000 Old_age Always - 189932 194 Temperature_Celsius 0x0022 126 103 000 Old_age Always - 26 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 93 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 22/26 Celsius Lifetime Min/Max Temperature: 22/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (98) Index Estimated Time Temperature Celsius 99 2012-06-21 13:29 41 ********************** 100 2012-06-21 13:30 42 *********************** ... ..( 16 skipped). .. *********************** 117 2012-06-21 13:47 42 *********************** 118 2012-06-21 13:48 41 ********************** 119 2012-06-21 13:49 42 *********************** 120 2012-06-21 13:50 42 *********************** 121 2012-06-21 13:51 41 ********************** 122 2012-06-21 13:52 42 *********************** ... ..( 6 skipped). .. *********************** 129 2012-06-21 13:59 42 *********************** 130 2012-06-21 14:00 41 ********************** 131 2012-06-21 14:01 42 *********************** 132 2012-06-21 14:02 42 *********************** 133 2012-06-21 14:03 41 ********************** ... ..( 2 skipped). .. ********************** 136 2012-06-21 14:06 41 ********************** 137 2012-06-21 14:07 42 *********************** 138 2012-06-21 14:08 42 *********************** 139 2012-06-21 14:09 41 ********************** 140 2012-06-21 14:10 42 *********************** 141 2012-06-21 14:11 42 *********************** 142 2012-06-21 14:12 42 *********************** 143 2012-06-21 14:13 41 ********************** 144 2012-06-21 14:14 42 *********************** 145 2012-06-21 14:15 41 ********************** ... ..( 3 skipped). .. ********************** 149 2012-06-21 14:19 41 ********************** 150 2012-06-21 14:20 42 *********************** 151 2012-06-21 14:21 41 ********************** 152 2012-06-21 14:22 41 ********************** 153 2012-06-21 14:23 41 ********************** 154 2012-06-21 14:24 42 *********************** 155 2012-06-21 14:25 42 *********************** 156 2012-06-21 14:26 42 *********************** 157 2012-06-21 14:27 41 ********************** 158 2012-06-21 14:28 42 *********************** ... ..( 32 skipped). .. *********************** 191 2012-06-21 15:01 42 *********************** 192 2012-06-21 15:02 43 ************************ 193 2012-06-21 15:03 42 *********************** ... ..( 4 skipped). .. *********************** 198 2012-06-21 15:08 42 *********************** 199 2012-06-21 15:09 43 ************************ 200 2012-06-21 15:10 42 *********************** 201 2012-06-21 15:11 42 *********************** 202 2012-06-21 15:12 42 *********************** 203 2012-06-21 15:13 43 ************************ 204 2012-06-21 15:14 42 *********************** 205 2012-06-21 15:15 43 ************************ 206 2012-06-21 15:16 42 *********************** ... ..( 4 skipped). .. *********************** 211 2012-06-21 15:21 42 *********************** 212 2012-06-21 15:22 43 ************************ 213 2012-06-21 15:23 42 *********************** ... ..( 8 skipped). .. *********************** 222 2012-06-21 15:32 42 *********************** 223 2012-06-21 15:33 43 ************************ 224 2012-06-21 15:34 42 *********************** ... ..( 22 skipped). .. *********************** 247 2012-06-21 15:57 42 *********************** 248 2012-06-21 15:58 43 ************************ 249 2012-06-21 15:59 42 *********************** ... ..( 6 skipped). .. *********************** 256 2012-06-21 16:06 42 *********************** 257 2012-06-21 16:07 43 ************************ 258 2012-06-21 16:08 42 *********************** 259 2012-06-21 16:09 42 *********************** 260 2012-06-21 16:10 43 ************************ 261 2012-06-21 16:11 42 *********************** ... ..( 4 skipped). .. *********************** 266 2012-06-21 16:16 42 *********************** 267 2012-06-21 16:17 43 ************************ 268 2012-06-21 16:18 42 *********************** 269 2012-06-21 16:19 42 *********************** 270 2012-06-21 16:20 42 *********************** 271 2012-06-21 16:21 ? - 272 2012-06-21 16:22 41 ********************** 273 2012-06-21 16:23 39 ******************** 274 2012-06-21 16:24 38 ******************* 275 2012-06-21 16:25 38 ******************* 276 2012-06-21 16:26 37 ****************** 277 2012-06-21 16:27 36 ***************** ... ..( 3 skipped). .. ***************** 281 2012-06-21 16:31 36 ***************** 282 2012-06-21 16:32 35 **************** ... ..( 2 skipped). .. **************** 285 2012-06-21 16:35 35 **************** 286 2012-06-21 16:36 34 *************** 287 2012-06-21 16:37 ? - 288 2012-06-21 16:38 35 **************** ... ..( 3 skipped). .. **************** 292 2012-06-21 16:42 35 **************** 293 2012-06-21 16:43 ? - 294 2012-06-21 16:44 36 ***************** 295 2012-06-21 16:45 ? - 296 2012-06-21 16:46 36 ***************** 297 2012-06-21 16:47 36 ***************** 298 2012-06-21 16:48 ? - 299 2012-06-21 16:49 22 *** 300 2012-06-21 16:50 23 **** 301 2012-06-21 16:51 22 *** ... ..( 2 skipped). .. *** 304 2012-06-21 16:54 22 *** 305 2012-06-21 16:55 23 **** 306 2012-06-21 16:56 23 **** 307 2012-06-21 16:57 23 **** 308 2012-06-21 16:58 24 ***** ... ..( 2 skipped). .. ***** 311 2012-06-21 17:01 24 ***** 312 2012-06-21 17:02 25 ****** ... ..( 9 skipped). .. ****** 322 2012-06-21 17:12 25 ****** 323 2012-06-21 17:13 26 ******* ... ..( 24 skipped). .. ******* 348 2012-06-21 17:38 26 ******* 349 2012-06-21 17:39 42 *********************** 350 2012-06-21 17:40 41 ********************** ... ..( 7 skipped). .. ********************** 358 2012-06-21 17:48 41 ********************** 359 2012-06-21 17:49 42 *********************** 360 2012-06-21 17:50 41 ********************** ... ..( 5 skipped). .. ********************** 366 2012-06-21 17:56 41 ********************** 367 2012-06-21 17:57 42 *********************** 368 2012-06-21 17:58 41 ********************** ... ..( 6 skipped). .. ********************** 375 2012-06-21 18:05 41 ********************** 376 2012-06-21 18:06 42 *********************** 377 2012-06-21 18:07 41 ********************** 378 2012-06-21 18:08 41 ********************** 379 2012-06-21 18:09 41 ********************** 380 2012-06-21 18:10 42 *********************** 381 2012-06-21 18:11 41 ********************** ... ..( 10 skipped). .. ********************** 392 2012-06-21 18:22 41 ********************** 393 2012-06-21 18:23 42 *********************** 394 2012-06-21 18:24 41 ********************** ... ..( 2 skipped). .. ********************** 397 2012-06-21 18:27 41 ********************** 398 2012-06-21 18:28 42 *********************** 399 2012-06-21 18:29 41 ********************** ... ..( 3 skipped). .. ********************** 403 2012-06-21 18:33 41 ********************** 404 2012-06-21 18:34 42 *********************** 405 2012-06-21 18:35 41 ********************** ... ..( 4 skipped). .. ********************** 410 2012-06-21 18:40 41 ********************** 411 2012-06-21 18:41 42 *********************** 412 2012-06-21 18:42 41 ********************** ... ..( 3 skipped). .. ********************** 416 2012-06-21 18:46 41 ********************** 417 2012-06-21 18:47 42 *********************** 418 2012-06-21 18:48 42 *********************** 419 2012-06-21 18:49 41 ********************** ... ..( 3 skipped). .. ********************** 423 2012-06-21 18:53 41 ********************** 424 2012-06-21 18:54 42 *********************** 425 2012-06-21 18:55 41 ********************** ... ..( 2 skipped). .. ********************** 428 2012-06-21 18:58 41 ********************** 429 2012-06-21 18:59 42 *********************** ... ..( 2 skipped). .. *********************** 432 2012-06-21 19:02 42 *********************** 433 2012-06-21 19:03 41 ********************** 434 2012-06-21 19:04 41 ********************** 435 2012-06-21 19:05 42 *********************** 436 2012-06-21 19:06 41 ********************** 437 2012-06-21 19:07 41 ********************** 438 2012-06-21 19:08 42 *********************** 439 2012-06-21 19:09 41 ********************** 440 2012-06-21 19:10 41 ********************** 441 2012-06-21 19:11 41 ********************** 442 2012-06-21 19:12 42 *********************** 443 2012-06-21 19:13 41 ********************** ... ..( 3 skipped). .. ********************** 447 2012-06-21 19:17 41 ********************** 448 2012-06-21 19:18 42 *********************** 449 2012-06-21 19:19 42 *********************** 450 2012-06-21 19:20 41 ********************** 451 2012-06-21 19:21 41 ********************** 452 2012-06-21 19:22 41 ********************** 453 2012-06-21 19:23 42 *********************** 454 2012-06-21 19:24 42 *********************** 455 2012-06-21 19:25 42 *********************** 456 2012-06-21 19:26 41 ********************** ... ..( 2 skipped). .. ********************** 459 2012-06-21 19:29 41 ********************** 460 2012-06-21 19:30 42 *********************** 461 2012-06-21 19:31 42 *********************** 462 2012-06-21 19:32 41 ********************** ... ..( 2 skipped). .. ********************** 465 2012-06-21 19:35 41 ********************** 466 2012-06-21 19:36 42 *********************** ... ..( 3 skipped). .. *********************** 470 2012-06-21 19:40 42 *********************** 471 2012-06-21 19:41 41 ********************** 472 2012-06-21 19:42 42 *********************** 473 2012-06-21 19:43 42 *********************** 474 2012-06-21 19:44 41 ********************** ... ..( 3 skipped). .. ********************** 0 2012-06-21 19:48 41 ********************** 1 2012-06-21 19:49 42 *********************** 2 2012-06-21 19:50 42 *********************** 3 2012-06-21 19:51 41 ********************** 4 2012-06-21 19:52 42 *********************** 5 2012-06-21 19:53 42 *********************** 6 2012-06-21 19:54 41 ********************** 7 2012-06-21 19:55 42 *********************** 8 2012-06-21 19:56 41 ********************** ... ..( 3 skipped). .. ********************** 12 2012-06-21 20:00 41 ********************** 13 2012-06-21 20:01 42 *********************** 14 2012-06-21 20:02 42 *********************** 15 2012-06-21 20:03 41 ********************** 16 2012-06-21 20:04 41 ********************** 17 2012-06-21 20:05 42 *********************** ... ..( 3 skipped). .. *********************** 21 2012-06-21 20:09 42 *********************** 22 2012-06-21 20:10 41 ********************** 23 2012-06-21 20:11 41 ********************** 24 2012-06-21 20:12 41 ********************** 25 2012-06-21 20:13 42 *********************** 26 2012-06-21 20:14 42 *********************** 27 2012-06-21 20:15 42 *********************** 28 2012-06-21 20:16 41 ********************** ... ..( 2 skipped). .. ********************** 31 2012-06-21 20:19 41 ********************** 32 2012-06-21 20:20 42 *********************** 33 2012-06-21 20:21 42 *********************** 34 2012-06-21 20:22 41 ********************** 35 2012-06-21 20:23 42 *********************** 36 2012-06-21 20:24 41 ********************** 37 2012-06-21 20:25 41 ********************** 38 2012-06-21 20:26 42 *********************** 39 2012-06-21 20:27 41 ********************** ... ..( 3 skipped). .. ********************** 43 2012-06-21 20:31 41 ********************** 44 2012-06-21 20:32 42 *********************** 45 2012-06-21 20:33 41 ********************** ... ..( 3 skipped). .. ********************** 49 2012-06-21 20:37 41 ********************** 50 2012-06-21 20:38 42 *********************** 51 2012-06-21 20:39 42 *********************** 52 2012-06-21 20:40 41 ********************** ... ..( 2 skipped). .. ********************** 55 2012-06-21 20:43 41 ********************** 56 2012-06-21 20:44 42 *********************** 57 2012-06-21 20:45 41 ********************** ... ..( 4 skipped). .. ********************** 62 2012-06-21 20:50 41 ********************** 63 2012-06-21 20:51 42 *********************** ... ..( 6 skipped). .. *********************** 70 2012-06-21 20:58 42 *********************** 71 2012-06-21 20:59 41 ********************** ... ..( 2 skipped). .. ********************** 74 2012-06-21 21:02 41 ********************** 75 2012-06-21 21:03 42 *********************** ... ..( 3 skipped). .. *********************** 79 2012-06-21 21:07 42 *********************** 80 2012-06-21 21:08 41 ********************** 81 2012-06-21 21:09 42 *********************** ... ..( 2 skipped). .. *********************** 84 2012-06-21 21:12 42 *********************** 85 2012-06-21 21:13 41 ********************** 86 2012-06-21 21:14 42 *********************** ... ..( 3 skipped). .. *********************** 90 2012-06-21 21:18 42 *********************** 91 2012-06-21 21:19 41 ********************** 92 2012-06-21 21:20 41 ********************** 93 2012-06-21 21:21 42 *********************** ... ..( 3 skipped). .. *********************** 97 2012-06-21 21:25 42 *********************** 98 2012-06-21 21:26 41 ********************** Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2957 Vendor specific ##################################################### # smartctl -x /dev/sdk (WD green md3) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WCAZAA084613 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:32 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (38100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 178 163 021 Pre-fail Always - 6066 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 89 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5148 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 87 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 81 193 Load_Cycle_Count 0x0032 148 148 000 Old_age Always - 157289 194 Temperature_Celsius 0x0022 125 102 000 Old_age Always - 25 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 3 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 93 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 25 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 25 [0] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:18:06.542 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:18:06.542 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:17:26.143 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:17:26.142 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:16:45.731 READ DMA EXT Error 24 [23] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:17:26.143 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:17:26.142 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:16:45.731 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:16:45.731 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:16:05.332 READ DMA EXT Error 23 [22] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:16:45.731 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:16:45.731 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:16:05.332 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:16:05.331 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:15:24.920 READ DMA EXT Error 22 [21] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:16:05.332 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:16:05.331 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:15:24.920 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:15:24.920 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:14:44.520 READ DMA EXT Error 21 [20] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:15:24.920 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:15:24.920 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:14:44.520 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:14:44.519 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:14:04.120 READ DMA EXT Error 20 [19] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:14:44.520 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:14:44.519 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:14:04.120 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:14:04.120 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:13:23.709 READ DMA EXT Error 19 [18] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:14:04.120 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:14:04.120 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:13:23.709 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:13:23.708 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:12:43.081 READ DMA EXT Error 18 [17] occurred at disk power-on lifetime: 5116 hours (213 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 e0 01 7b 60 e0 00 Error: UNC 1024 sectors at LBA = 0xe0017b60 = 3758193504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:13:23.709 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:13:23.708 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:12:43.081 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 01 00 00 22:12:43.081 SET FEATURES [Set transfer mode] 25 00 00 04 00 00 00 e0 01 79 c0 e0 00 22:12:02.694 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 22/25 Celsius Lifetime Min/Max Temperature: 22/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (77) Index Estimated Time Temperature Celsius 78 2012-06-21 13:29 41 ********************** ... ..(120 skipped). .. ********************** 199 2012-06-21 15:30 41 ********************** 200 2012-06-21 15:31 ? - 201 2012-06-21 15:32 40 ********************* 202 2012-06-21 15:33 38 ******************* 203 2012-06-21 15:34 37 ****************** 204 2012-06-21 15:35 36 ***************** 205 2012-06-21 15:36 36 ***************** 206 2012-06-21 15:37 35 **************** 207 2012-06-21 15:38 35 **************** 208 2012-06-21 15:39 34 *************** 209 2012-06-21 15:40 34 *************** 210 2012-06-21 15:41 34 *************** 211 2012-06-21 15:42 33 ************** ... ..( 2 skipped). .. ************** 214 2012-06-21 15:45 33 ************** 215 2012-06-21 15:46 ? - 216 2012-06-21 15:47 33 ************** ... ..( 3 skipped). .. ************** 220 2012-06-21 15:51 33 ************** 221 2012-06-21 15:52 ? - 222 2012-06-21 15:53 34 *************** 223 2012-06-21 15:54 ? - 224 2012-06-21 15:55 33 ************** 225 2012-06-21 15:56 33 ************** 226 2012-06-21 15:57 33 ************** 227 2012-06-21 15:58 ? - 228 2012-06-21 15:59 22 *** ... ..( 7 skipped). .. *** 236 2012-06-21 16:07 22 *** 237 2012-06-21 16:08 23 **** ... ..( 3 skipped). .. **** 241 2012-06-21 16:12 23 **** 242 2012-06-21 16:13 24 ***** ... ..( 6 skipped). .. ***** 249 2012-06-21 16:20 24 ***** 250 2012-06-21 16:21 25 ****** ... ..( 26 skipped). .. ****** 277 2012-06-21 16:48 25 ****** 278 2012-06-21 16:49 41 ********************** ... ..(276 skipped). .. ********************** 77 2012-06-21 21:26 41 ********************** Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2961 Vendor specific ##################################################### # smartctl -x /dev/sdl (WD green md3) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-60MVWB0 Serial Number: WD-WCAZA8560135 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:33 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (36600) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 192 167 021 Pre-fail Always - 5400 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 93 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6511 10 Spin_Retry_Count 0x0033 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 92 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032833 190 Airflow_Temperature_Cel 0x0022 074 052 040 Old_age Always - 26 (Lifetime Min/Max 22/26) 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 86 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 6 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 93 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 22/26 Celsius Lifetime Min/Max Temperature: 22/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (50) Index Estimated Time Temperature Celsius 51 2012-06-21 19:19 34 *************** ... ..( 13 skipped). .. *************** 65 2012-06-21 19:33 34 *************** 66 2012-06-21 19:34 35 **************** 67 2012-06-21 19:35 35 **************** 68 2012-06-21 19:36 35 **************** 69 2012-06-21 19:37 ? - 70 2012-06-21 19:38 35 **************** ... ..( 4 skipped). .. **************** 75 2012-06-21 19:43 35 **************** 76 2012-06-21 19:44 ? - 77 2012-06-21 19:45 36 ***************** 78 2012-06-21 19:46 35 **************** ... ..( 8 skipped). .. **************** 87 2012-06-21 19:55 35 **************** 88 2012-06-21 19:56 ? - 89 2012-06-21 19:57 34 *************** ... ..( 7 skipped). .. *************** 97 2012-06-21 20:05 34 *************** 98 2012-06-21 20:06 33 ************** ... ..( 9 skipped). .. ************** 108 2012-06-21 20:16 33 ************** 109 2012-06-21 20:17 32 ************* ... ..( 11 skipped). .. ************* 121 2012-06-21 20:29 32 ************* 122 2012-06-21 20:30 31 ************ ... ..( 4 skipped). .. ************ 127 2012-06-21 20:35 31 ************ 0 2012-06-21 20:36 ? - 1 2012-06-21 20:37 22 *** ... ..( 2 skipped). .. *** 4 2012-06-21 20:40 22 *** 5 2012-06-21 20:41 23 **** 6 2012-06-21 20:42 23 **** 7 2012-06-21 20:43 23 **** 8 2012-06-21 20:44 24 ***** 9 2012-06-21 20:45 24 ***** 10 2012-06-21 20:46 24 ***** 11 2012-06-21 20:47 25 ****** ... ..( 9 skipped). .. ****** 21 2012-06-21 20:57 25 ****** 22 2012-06-21 20:58 26 ******* ... ..( 27 skipped). .. ******* 50 2012-06-21 21:26 26 ******* Error SMART WRITE LOG does not return COUNT and LBA_LOW register Warning: device does not support SCT (Get) Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2960 Vendor specific ##################################################### # smartctl -x /dev/sdm (WD green md3) ##################################################### smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (Adv. Format) family Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WCAZAA268417 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 21 21:26:33 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=.... SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (36960) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 195 167 021 Pre-fail Always - 5208 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 147 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5306 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 145 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 137 193 Load_Cycle_Count 0x0032 151 151 000 Old_age Always - 148850 194 Temperature_Celsius 0x0022 125 105 000 Old_age Always - 25 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 2 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] GP/S Log at address 0xab has 1 sectors [Device vendor specific log] GP/S Log at address 0xac has 1 sectors [Device vendor specific log] GP/S Log at address 0xad has 1 sectors [Device vendor specific log] GP/S Log at address 0xae has 1 sectors [Device vendor specific log] GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] GP Log at address 0xc1 has 93 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 22/25 Celsius Lifetime Min/Max Temperature: 22/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (187) Index Estimated Time Temperature Celsius 188 2012-06-21 13:29 36 ***************** ... ..(122 skipped). .. ***************** 311 2012-06-21 15:32 36 ***************** 312 2012-06-21 15:33 ? - 313 2012-06-21 15:34 35 **************** 314 2012-06-21 15:35 34 *************** 315 2012-06-21 15:36 33 ************** ... ..( 2 skipped). .. ************** 318 2012-06-21 15:39 33 ************** 319 2012-06-21 15:40 32 ************* ... ..( 2 skipped). .. ************* 322 2012-06-21 15:43 32 ************* 323 2012-06-21 15:44 ? - 324 2012-06-21 15:45 32 ************* 325 2012-06-21 15:46 32 ************* 326 2012-06-21 15:47 32 ************* 327 2012-06-21 15:48 31 ************ 328 2012-06-21 15:49 31 ************ 329 2012-06-21 15:50 ? - 330 2012-06-21 15:51 32 ************* 331 2012-06-21 15:52 ? - 332 2012-06-21 15:53 32 ************* 333 2012-06-21 15:54 ? - 334 2012-06-21 15:55 32 ************* 335 2012-06-21 15:56 32 ************* 336 2012-06-21 15:57 32 ************* 337 2012-06-21 15:58 ? - 338 2012-06-21 15:59 22 *** ... ..( 12 skipped). .. *** 351 2012-06-21 16:12 22 *** 352 2012-06-21 16:13 23 **** ... ..( 8 skipped). .. **** 361 2012-06-21 16:22 23 **** 362 2012-06-21 16:23 24 ***** ... ..( 21 skipped). .. ***** 384 2012-06-21 16:45 24 ***** 385 2012-06-21 16:46 25 ****** 386 2012-06-21 16:47 25 ****** 387 2012-06-21 16:48 25 ****** 388 2012-06-21 16:49 36 ***************** ... ..( 22 skipped). .. ***************** 411 2012-06-21 17:12 36 ***************** 412 2012-06-21 17:13 35 **************** 413 2012-06-21 17:14 35 **************** 414 2012-06-21 17:15 35 **************** 415 2012-06-21 17:16 36 ***************** ... ..(249 skipped). .. ***************** 187 2012-06-21 21:26 36 ***************** Warning: device does not support SCT Error Recovery Control command SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2962 Vendor specific