[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.7.0-rc8 (root@sage) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #2 SMP Thu Dec 6 15:14:49 PST 2012 [ 0.000000] Command line: root=/dev/sda2 kmemleak=off [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a7c2dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7c2e000-0x00000000a7c8bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a7c8c000-0x00000000a7cacfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a7cad000-0x00000000a7cbdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a7cbe000-0x00000000a7cd3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a7cd4000-0x00000000a7cd8fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7cd9000-0x00000000a7cdbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a7cdc000-0x00000000a7cdcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a7cdd000-0x00000000a7ce3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a7ce4000-0x00000000a7d47fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a7d48000-0x00000000a7d8afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a7d8b000-0x00000000a7efffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/C60M1-I, BIOS 0305 08/07/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0A7F00000 mask FFFF00000 uncachable [ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000023f000000 aka 9200M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xa7f00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xa7f00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcd20-0x000fcd2f] mapped at [ffff8800000fcd20] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xa7efffff] [ 0.000000] [mem 0x00000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xa7dfffff] page 2M [ 0.000000] [mem 0xa7e00000-0xa7efffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xa7efffff @ [mem 0x1fffd000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100001000-0x23effffff] [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G [ 0.000000] [mem 0x200000000-0x23effffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x23effffff @ [mem 0xa7efc000-0xa7efffff] [ 0.000000] RAMDISK: [mem 0x37c81000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000a7c83068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000a7c894a0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598) [ 0.000000] ACPI: DSDT 00000000a7c83150 0634D (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000a7ce3f80 00040 [ 0.000000] ACPI: APIC 00000000a7c89598 00062 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000a7c89600 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 00000000a7c89640 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 00000000a7c89678 0030C (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000a7c89988 0168E (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff] [ 0.000000] NODE_DATA [mem 0x23effc000-0x23effffff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x23effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xa7c2dfff] [ 0.000000] node 0: [mem 0xa7cd4000-0xa7cd8fff] [ 0.000000] node 0: [mem 0xa7d8b000-0xa7efffff] [ 0.000000] node 0: [mem 0x100001000-0x23effffff] [ 0.000000] On node 0 totalpages: 1994036 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 667112 pages, LIFO batch:31 [ 0.000000] Normal zone: 20416 pages used for memmap [ 0.000000] Normal zone: 1286207 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0xa7f00000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023ec00000 s78528 r8192 d23872 u1048576 [ 0.000000] pcpu-alloc: s78528 r8192 d23872 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1957230 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda2 kmemleak=off [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7766644k/9420800k available (6675k kernel code, 1444656k absent, 209500k reserved, 6193k data, 724k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.010000] tsc: Detected 1000.034 MHz processor [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.06 BogoMIPS (lpj=10000340) [ 0.000167] pid_max: default: 32768 minimum: 301 [ 0.000285] Security Framework initialized [ 0.000367] SELinux: Initializing. [ 0.000454] SELinux: Starting in permissive mode [ 0.001625] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008284] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011088] Mount-cache hash table entries: 256 [ 0.011632] Initializing cgroup subsys cpuacct [ 0.011717] Initializing cgroup subsys freezer [ 0.011835] tseg: 00a7f00000 [ 0.011840] CPU: Physical Processor ID: 0 [ 0.011917] CPU: Processor Core ID: 0 [ 0.011994] mce: CPU supports 6 MCE banks [ 0.012088] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.012088] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.012088] tlb_flushall_shift: 5 [ 0.012524] Freeing SMP alternatives: 24k freed [ 0.012621] ACPI: Core revision 20120913 [ 0.021039] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.121050] smpboot: CPU0: AMD C-60 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00) [ 0.238334] Performance Events: AMD PMU driver. [ 0.238454] ... version: 0 [ 0.238532] ... bit width: 48 [ 0.238609] ... generic registers: 4 [ 0.238685] ... value mask: 0000ffffffffffff [ 0.238764] ... max period: 00007fffffffffff [ 0.238842] ... fixed-purpose events: 0 [ 0.238919] ... event mask: 000000000000000f [ 0.239382] MCE: In-kernel MCE decoding enabled. [ 0.239642] smpboot: Booting Node 0, Processors #1 OK [ 0.252899] Brought up 2 CPUs [ 0.252983] smpboot: Total of 2 processors activated (4000.13 BogoMIPS) [ 0.254653] NET: Registered protocol family 16 [ 0.255258] kworker/u:0 (18) used greatest stack depth: 6584 bytes left [ 0.256315] kworker/u:0 (26) used greatest stack depth: 6072 bytes left [ 0.256931] ACPI: bus type pci registered [ 0.257427] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.257570] PCI: not using MMCONFIG [ 0.257652] PCI: Using configuration type 1 for base access [ 0.257731] PCI: Using configuration type 1 for extended access [ 0.258171] kworker/u:0 (32) used greatest stack depth: 5624 bytes left [ 0.287296] bio: create slab at 0 [ 0.287844] ACPI: Added _OSI(Module Device) [ 0.287944] ACPI: Added _OSI(Processor Device) [ 0.288027] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.288107] ACPI: Added _OSI(Processor Aggregator Device) [ 0.290700] ACPI: EC: Look up EC in DSDT [ 0.293794] ACPI: Executed 3 blocks of module-level executable AML code [ 0.334080] ACPI: Interpreter enabled [ 0.334170] ACPI: (supports S0 S5) [ 0.334337] ACPI: Using IOAPIC for interrupt routing [ 0.334730] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.334945] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.396797] ACPI: No dock devices found. [ 0.396905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.397387] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.398107] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) [ 0.398614] PCI host bridge to bus 0000:00 [ 0.398724] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.398814] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.398904] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.398993] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.399083] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.399193] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.399269] pci 0000:00:01.0: [1002:9807] type 00 class 0x030000 [ 0.399290] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.399305] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff] [ 0.399320] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff] [ 0.399400] pci 0000:00:01.0: supports D1 D2 [ 0.399436] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400 [ 0.399535] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.399600] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.399632] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147] [ 0.399651] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133] [ 0.399669] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127] [ 0.399687] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113] [ 0.399705] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f] [ 0.399723] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff] [ 0.399818] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.399842] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff] [ 0.399957] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.399989] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff] [ 0.400111] pci 0000:00:12.2: supports D1 D2 [ 0.400115] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.400151] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.400172] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff] [ 0.400274] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.400302] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff] [ 0.400421] pci 0000:00:13.2: supports D1 D2 [ 0.400427] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.400467] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.400611] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.400647] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit] [ 0.400751] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.400779] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.400899] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.400969] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.400993] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff] [ 0.401108] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.401233] pci 0000:00:15.0: supports D1 D2 [ 0.401277] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 0.401403] pci 0000:00:15.1: supports D1 D2 [ 0.401452] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.401475] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff] [ 0.401589] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.401620] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff] [ 0.401747] pci 0000:00:16.2: supports D1 D2 [ 0.401752] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.401796] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.401859] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.401916] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.401976] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.402051] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.402109] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.402166] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.402223] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.402354] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.402539] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) [ 0.402639] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.402645] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.402652] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.402659] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.402773] pci 0000:00:15.0: PCI bridge to [bus 03] [ 0.402989] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.403019] pci 0000:04:00.0: reg 10: [io 0xe000-0xe0ff] [ 0.403065] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.403096] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.403212] pci 0000:04:00.0: supports D1 D2 [ 0.403218] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.423205] pci 0000:00:15.1: PCI bridge to [bus 04] [ 0.423308] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 0.423324] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.423370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.423723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.423793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT] [ 0.423903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.423966] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.424083] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.443250] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.443890] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.445560] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.446134] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.446710] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.447258] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.447807] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.448354] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.450021] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.450175] vgaarb: loaded [ 0.450256] vgaarb: bridge control possible 0000:00:01.0 [ 0.450772] SCSI subsystem initialized [ 0.450859] ACPI: bus type scsi registered [ 0.451576] libata version 3.00 loaded. [ 0.451996] ACPI: bus type usb registered [ 0.452538] usbcore: registered new interface driver usbfs [ 0.452797] usbcore: registered new interface driver hub [ 0.453150] usbcore: registered new device driver usb [ 0.454208] PCI: Using ACPI for IRQ routing [ 0.466422] PCI: pci_cache_line_size set to 64 bytes [ 0.466556] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.466562] e820: reserve RAM buffer [mem 0xa7c2e000-0xa7ffffff] [ 0.466568] e820: reserve RAM buffer [mem 0xa7cd9000-0xa7ffffff] [ 0.466573] e820: reserve RAM buffer [mem 0xa7f00000-0xa7ffffff] [ 0.466577] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff] [ 0.468043] NetLabel: Initializing [ 0.468174] NetLabel: domain hash size = 128 [ 0.468257] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.468368] NetLabel: unlabeled traffic allowed by default [ 0.468503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.468751] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.470866] Switching to clocksource hpet [ 0.478157] pnp: PnP ACPI init [ 0.478283] ACPI: bus type pnp registered [ 0.478834] pnp 00:00: [bus 00-ff] [ 0.478843] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.478850] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.478856] pnp 00:00: [io 0x0d00-0xffff window] [ 0.478863] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.478869] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.478875] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.478881] pnp 00:00: [mem 0x00000000 window] [ 0.479350] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.479549] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.480068] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.480180] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.481584] pnp 00:02: [io 0x040b] [ 0.481591] pnp 00:02: [io 0x04d6] [ 0.481598] pnp 00:02: [io 0x0c00-0x0c01] [ 0.481603] pnp 00:02: [io 0x0c14] [ 0.481609] pnp 00:02: [io 0x0c50-0x0c51] [ 0.481615] pnp 00:02: [io 0x0c52] [ 0.481620] pnp 00:02: [io 0x0c6c] [ 0.481625] pnp 00:02: [io 0x0c6f] [ 0.481630] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.481635] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.481645] pnp 00:02: [io 0x0cd4-0x0cd5] [ 0.481651] pnp 00:02: [io 0x0cd6-0x0cd7] [ 0.481656] pnp 00:02: [io 0x0cd8-0x0cdf] [ 0.481662] pnp 00:02: [io 0x0800-0x089f] [ 0.481668] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.481673] pnp 00:02: [io 0x0000-0x000f] [ 0.481678] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.481684] pnp 00:02: [io 0x0900-0x090f] [ 0.481689] pnp 00:02: [io 0x0910-0x091f] [ 0.481694] pnp 00:02: [io 0xfe00-0xfefe] [ 0.481700] pnp 00:02: [io 0x0060-0x005f disabled] [ 0.481705] pnp 00:02: [io 0x0064-0x0063 disabled] [ 0.481712] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 0.481717] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 0.481723] pnp 00:02: [mem 0xfed80000-0xfed8ffff] [ 0.481728] pnp 00:02: [mem 0xfed61000-0xfed70fff] [ 0.481734] pnp 00:02: [mem 0xfec10000-0xfec10fff] [ 0.481739] pnp 00:02: [mem 0xfed00000-0xfed00fff] [ 0.481745] pnp 00:02: [mem 0xffc00000-0xffffffff] [ 0.482233] system 00:02: [io 0x040b] has been reserved [ 0.482338] system 00:02: [io 0x04d6] has been reserved [ 0.482426] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.482515] system 00:02: [io 0x0c14] has been reserved [ 0.482602] system 00:02: [io 0x0c50-0x0c51] has been reserved [ 0.482690] system 00:02: [io 0x0c52] has been reserved [ 0.482772] system 00:02: [io 0x0c6c] has been reserved [ 0.482852] system 00:02: [io 0x0c6f] has been reserved [ 0.482933] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.483015] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.483100] system 00:02: [io 0x0cd4-0x0cd5] has been reserved [ 0.483188] system 00:02: [io 0x0cd6-0x0cd7] has been reserved [ 0.483276] system 00:02: [io 0x0cd8-0x0cdf] has been reserved [ 0.483364] system 00:02: [io 0x0800-0x089f] has been reserved [ 0.483452] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.483541] system 00:02: [io 0x0900-0x090f] has been reserved [ 0.483629] system 00:02: [io 0x0910-0x091f] has been reserved [ 0.483718] system 00:02: [io 0xfe00-0xfefe] has been reserved [ 0.483811] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.483902] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.483992] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.484082] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.484186] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.484276] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.484367] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved [ 0.484463] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.484937] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.484944] pnp 00:03: [io 0x0300-0x031f] [ 0.484949] pnp 00:03: [io 0x0290-0x029f] [ 0.484956] pnp 00:03: [io 0x0230-0x023f] [ 0.485319] system 00:03: [io 0x0300-0x031f] has been reserved [ 0.485426] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.485515] system 00:03: [io 0x0230-0x023f] has been reserved [ 0.485610] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.485673] pnp 00:04: [dma 4] [ 0.485680] pnp 00:04: [io 0x0000-0x000f] [ 0.485687] pnp 00:04: [io 0x0081-0x0083] [ 0.485692] pnp 00:04: [io 0x0087] [ 0.485698] pnp 00:04: [io 0x0089-0x008b] [ 0.485703] pnp 00:04: [io 0x008f] [ 0.485708] pnp 00:04: [io 0x00c0-0x00df] [ 0.486023] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.486082] pnp 00:05: [io 0x0070-0x0071] [ 0.486104] pnp 00:05: [irq 8] [ 0.486255] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.486299] pnp 00:06: [io 0x0061] [ 0.486427] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.486548] pnp 00:07: [io 0x0010-0x001f] [ 0.486555] pnp 00:07: [io 0x0022-0x003f] [ 0.486560] pnp 00:07: [io 0x0044-0x005f] [ 0.486565] pnp 00:07: [io 0x0072-0x007f] [ 0.486570] pnp 00:07: [io 0x0080] [ 0.486576] pnp 00:07: [io 0x0084-0x0086] [ 0.486581] pnp 00:07: [io 0x0088] [ 0.486586] pnp 00:07: [io 0x008c-0x008e] [ 0.486591] pnp 00:07: [io 0x0090-0x009f] [ 0.486603] pnp 00:07: [io 0x00a2-0x00bf] [ 0.486608] pnp 00:07: [io 0x00e0-0x00ef] [ 0.486614] pnp 00:07: [io 0x04d0-0x04d1] [ 0.486806] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.486908] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.486934] pnp 00:08: [io 0x00f0-0x00ff] [ 0.486948] pnp 00:08: [irq 13] [ 0.487184] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.487474] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.488344] pnp 00:0a: [io 0x03f8-0x03ff] [ 0.488370] pnp 00:0a: [irq 4] [ 0.488377] pnp 00:0a: [dma 0 disabled] [ 0.488705] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.489087] pnp 00:0b: [mem 0xa8000000-0xbfffffff] [ 0.489327] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved [ 0.489425] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.489788] pnp 00:0c: [mem 0xfed00000-0xfed003ff] [ 0.490042] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.490077] pnp: PnP ACPI: found 13 devices [ 0.490164] ACPI: ACPI bus type pnp unregistered [ 0.505892] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.505909] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.505918] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.505967] pci 0000:00:04.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.505975] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.505983] pci 0000:00:04.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.505997] pci 0000:00:04.0: BAR 8: assigned [mem 0xd0100000-0xd02fffff] [ 0.506101] pci 0000:00:04.0: BAR 9: assigned [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.506229] pci 0000:00:04.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.506320] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.506409] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] [ 0.506500] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff] [ 0.506592] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.506720] pci 0000:00:14.4: PCI bridge to [bus 02] [ 0.506821] pci 0000:00:15.0: PCI bridge to [bus 03] [ 0.506921] pci 0000:00:15.1: PCI bridge to [bus 04] [ 0.507008] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 0.507104] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.507288] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.507293] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.507298] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.507303] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 0.507308] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.507312] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff] [ 0.507317] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.507322] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.507327] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.507332] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.507336] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff] [ 0.507341] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.507346] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.507409] NET: Registered protocol family 2 [ 0.509363] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.515566] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.516386] TCP: Hash tables configured (established 524288 bind 65536) [ 0.516600] TCP: reno registered [ 0.516729] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.516948] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.517295] NET: Registered protocol family 1 [ 0.517875] RPC: Registered named UNIX socket transport module. [ 0.517976] RPC: Registered udp transport module. [ 0.518058] RPC: Registered tcp transport module. [ 0.518141] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.518249] pci 0000:00:01.0: Boot video device [ 0.518748] PCI: CLS 64 bytes, default 64 [ 0.518880] Unpacking initramfs... [ 0.693327] Freeing initrd memory: 3516k freed [ 0.695946] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.696046] software IO TLB [mem 0xa3c2e000-0xa7c2dfff] (64MB) mapped at [ffff8800a3c2e000-ffff8800a7c2dfff] [ 0.696446] LVT offset 0 assigned for vector 0x400 [ 0.696640] perf: AMD IBS detected (0x000000ff) [ 0.698621] microcode: CPU0: patch_level=0x0500010d [ 0.698742] microcode: CPU1: patch_level=0x0500010d [ 0.698959] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.699850] audit: initializing netlink socket (disabled) [ 0.699975] type=2000 audit(1354836518.580:1): initialized [ 0.746169] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.756554] VFS: Disk quotas dquot_6.5.2 [ 0.756895] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.760246] NFS: Registering the id_resolver key type [ 0.760369] Key type id_resolver registered [ 0.760452] Key type id_legacy registered [ 0.760541] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.761123] msgmni has been set to 15176 [ 0.761463] SELinux: Registering netfilter hooks [ 0.762626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.762758] io scheduler noop registered [ 0.762840] io scheduler deadline registered [ 0.762935] io scheduler cfq registered (default) [ 0.763716] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.764605] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.764753] ACPI: Power Button [PWRB] [ 0.765021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.765149] ACPI: Power Button [PWRF] [ 0.765839] ACPI: acpi_idle registered with cpuidle [ 0.767103] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.787992] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.790066] Non-volatile memory driver v1.3 [ 0.790160] Linux agpgart interface v0.103 [ 0.790938] [drm] Initialized drm 1.1.0 20060810 [ 0.794731] loop: module loaded [ 0.795824] ahci 0000:00:11.0: version 3.0 [ 0.796096] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.796224] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.799716] scsi0 : ahci [ 0.800376] scsi1 : ahci [ 0.800894] scsi2 : ahci [ 0.801423] scsi3 : ahci [ 0.801938] scsi4 : ahci [ 0.802494] scsi5 : ahci [ 0.803000] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19 [ 0.803125] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19 [ 0.803238] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19 [ 0.803352] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19 [ 0.803467] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19 [ 0.803589] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19 [ 0.805061] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.805152] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.805372] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.805463] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.805675] sky2: driver version 1.30 [ 0.806560] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.806962] r8169 0000:04:00.0: irq 40 for MSI/MSI-X [ 0.807638] r8169 0000:04:00.0 eth0: RTL8168f/8111f at 0xffffc90000c74000, 30:85:a9:eb:f2:25, XID 08000800 IRQ 40 [ 0.807782] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.808604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.808704] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 0.808787] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.809020] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.809160] QUIRK: Enable AMD PLL fix [ 0.809167] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.809298] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 0.809308] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 0.809362] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.809383] ehci_hcd 0000:00:12.2: debug port 1 [ 0.809477] ehci_hcd 0000:00:12.2: MWI active [ 0.809482] ehci_hcd 0000:00:12.2: supports USB remote wakeup [ 0.809528] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb49000 [ 0.809621] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 0.820908] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.821083] usb usb1: default language 0x0409 [ 0.821098] usb usb1: udev 1, busnum 1, minor = 0 [ 0.821104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.821187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.821303] usb usb1: Product: EHCI Host Controller [ 0.821382] usb usb1: Manufacturer: Linux 3.7.0-rc8 ehci_hcd [ 0.821462] usb usb1: SerialNumber: 0000:00:12.2 [ 0.822038] usb usb1: usb_probe_device [ 0.822051] usb usb1: configuration #1 chosen from 1 choice [ 0.822076] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.822501] hub 1-0:1.0: usb_probe_interface [ 0.822513] hub 1-0:1.0: usb_probe_interface - got id [ 0.822519] hub 1-0:1.0: USB hub found [ 0.822622] hub 1-0:1.0: 5 ports detected [ 0.822701] hub 1-0:1.0: standalone hub [ 0.822705] hub 1-0:1.0: no power switching (usb 1.0) [ 0.822709] hub 1-0:1.0: individual port over-current protection [ 0.822714] hub 1-0:1.0: power on to power good time: 20ms [ 0.822722] hub 1-0:1.0: local power source is good [ 0.823262] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.823391] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.823772] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.823911] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.825175] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 0.825185] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 0.825236] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.825258] ehci_hcd 0000:00:13.2: debug port 1 [ 0.825354] ehci_hcd 0000:00:13.2: MWI active [ 0.825359] ehci_hcd 0000:00:13.2: supports USB remote wakeup [ 0.825382] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb47000 [ 0.825475] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 0.840847] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.841012] usb usb2: default language 0x0409 [ 0.841026] usb usb2: udev 1, busnum 2, minor = 128 [ 0.841033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.841116] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.841232] usb usb2: Product: EHCI Host Controller [ 0.841311] usb usb2: Manufacturer: Linux 3.7.0-rc8 ehci_hcd [ 0.841392] usb usb2: SerialNumber: 0000:00:13.2 [ 0.841972] usb usb2: usb_probe_device [ 0.841985] usb usb2: configuration #1 chosen from 1 choice [ 0.842010] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.842433] hub 2-0:1.0: usb_probe_interface [ 0.842446] hub 2-0:1.0: usb_probe_interface - got id [ 0.842451] hub 2-0:1.0: USB hub found [ 0.842552] hub 2-0:1.0: 5 ports detected [ 0.842631] hub 2-0:1.0: standalone hub [ 0.842635] hub 2-0:1.0: no power switching (usb 1.0) [ 0.842639] hub 2-0:1.0: individual port over-current protection [ 0.842643] hub 2-0:1.0: power on to power good time: 20ms [ 0.842651] hub 2-0:1.0: local power source is good [ 0.843174] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.843306] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 0.843830] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 0.843972] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.844100] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4 [ 0.844108] ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 0.844152] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.844172] ehci_hcd 0000:00:16.2: debug port 1 [ 0.844261] ehci_hcd 0000:00:16.2: MWI active [ 0.844266] ehci_hcd 0000:00:16.2: supports USB remote wakeup [ 0.844288] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb44000 [ 0.844374] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 0.860841] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.861027] usb usb3: default language 0x0409 [ 0.861042] usb usb3: udev 1, busnum 3, minor = 256 [ 0.861048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.861132] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.861247] usb usb3: Product: EHCI Host Controller [ 0.861328] usb usb3: Manufacturer: Linux 3.7.0-rc8 ehci_hcd [ 0.861408] usb usb3: SerialNumber: 0000:00:16.2 [ 0.861981] usb usb3: usb_probe_device [ 0.861994] usb usb3: configuration #1 chosen from 1 choice [ 0.862021] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.862456] hub 3-0:1.0: usb_probe_interface [ 0.862469] hub 3-0:1.0: usb_probe_interface - got id [ 0.862474] hub 3-0:1.0: USB hub found [ 0.862578] hub 3-0:1.0: 4 ports detected [ 0.862659] hub 3-0:1.0: standalone hub [ 0.862663] hub 3-0:1.0: no power switching (usb 1.0) [ 0.862667] hub 3-0:1.0: individual port over-current protection [ 0.862671] hub 3-0:1.0: power on to power good time: 20ms [ 0.862679] hub 3-0:1.0: local power source is good [ 0.863116] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.863437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.863531] ohci_hcd: block sizes: ed 80 td 96 [ 0.863633] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.864084] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.864228] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk [ 0.864267] ohci_hcd 0000:00:12.0: created debug files [ 0.864272] ohci_hcd 0000:00:12.0: supports USB remote wakeup [ 0.864312] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4a000 [ 0.920853] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 0.924782] ohci_hcd 0000:00:12.0: OHCI controller state [ 0.924797] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running [ 0.924806] ohci_hcd 0000:00:12.0: control 0x083 HCFS=operational CBSR=3 [ 0.924812] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 [ 0.924819] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF [ 0.924825] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 0.924837] ohci_hcd 0000:00:12.0: hcca frame #0005 [ 0.924844] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) [ 0.924850] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 0.924856] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE [ 0.924863] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS [ 0.924869] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS [ 0.924876] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS [ 0.924882] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS [ 0.924888] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS [ 0.924921] usb usb4: default language 0x0409 [ 0.924935] usb usb4: udev 1, busnum 4, minor = 384 [ 0.924941] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.925031] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.925146] usb usb4: Product: OHCI Host Controller [ 0.925226] usb usb4: Manufacturer: Linux 3.7.0-rc8 ohci_hcd [ 0.925306] usb usb4: SerialNumber: 0000:00:12.0 [ 0.925893] usb usb4: usb_probe_device [ 0.925906] usb usb4: configuration #1 chosen from 1 choice [ 0.925930] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.926362] hub 4-0:1.0: usb_probe_interface [ 0.926375] hub 4-0:1.0: usb_probe_interface - got id [ 0.926380] hub 4-0:1.0: USB hub found [ 0.926484] hub 4-0:1.0: 5 ports detected [ 0.926562] hub 4-0:1.0: standalone hub [ 0.926566] hub 4-0:1.0: no power switching (usb 1.0) [ 0.926570] hub 4-0:1.0: no over-current protection [ 0.926575] hub 4-0:1.0: power on to power good time: 4ms [ 0.926584] hub 4-0:1.0: local power source is good [ 0.927094] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.927229] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.927737] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.927896] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk [ 0.927945] ohci_hcd 0000:00:13.0: created debug files [ 0.927950] ohci_hcd 0000:00:13.0: supports USB remote wakeup [ 0.927972] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb48000 [ 0.940818] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 0.960790] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 0.984735] ohci_hcd 0000:00:13.0: OHCI controller state [ 0.984751] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running [ 0.984759] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 [ 0.984766] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 0.984772] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF [ 0.984779] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 0.984791] ohci_hcd 0000:00:13.0: hcca frame #0005 [ 0.984798] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) [ 0.984804] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 0.984810] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 0.984817] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 0.984823] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 0.984829] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 0.984835] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS [ 0.984841] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS [ 0.984875] usb usb5: default language 0x0409 [ 0.984888] usb usb5: udev 1, busnum 5, minor = 512 [ 0.984894] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.984985] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.985100] usb usb5: Product: OHCI Host Controller [ 0.985180] usb usb5: Manufacturer: Linux 3.7.0-rc8 ohci_hcd [ 0.985259] usb usb5: SerialNumber: 0000:00:13.0 [ 0.985893] usb usb5: usb_probe_device [ 0.985906] usb usb5: configuration #1 chosen from 1 choice [ 0.985932] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.986389] hub 5-0:1.0: usb_probe_interface [ 0.986402] hub 5-0:1.0: usb_probe_interface - got id [ 0.986408] hub 5-0:1.0: USB hub found [ 0.986511] hub 5-0:1.0: 5 ports detected [ 0.986588] hub 5-0:1.0: standalone hub [ 0.986592] hub 5-0:1.0: no power switching (usb 1.0) [ 0.986596] hub 5-0:1.0: no over-current protection [ 0.986601] hub 5-0:1.0: power on to power good time: 4ms [ 0.986610] hub 5-0:1.0: local power source is good [ 0.987124] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.987248] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.987783] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 0.987926] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk [ 0.987976] ohci_hcd 0000:00:14.5: created debug files [ 0.987980] ohci_hcd 0000:00:14.5: supports USB remote wakeup [ 0.988003] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb46000 [ 1.020727] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.044713] ohci_hcd 0000:00:14.5: OHCI controller state [ 1.044728] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running [ 1.044737] ohci_hcd 0000:00:14.5: control 0x083 HCFS=operational CBSR=3 [ 1.044743] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 [ 1.044750] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF [ 1.044757] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.044768] ohci_hcd 0000:00:14.5: hcca frame #0005 [ 1.044776] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2) [ 1.044781] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.044787] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE [ 1.044794] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS [ 1.044801] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS [ 1.044832] usb usb6: default language 0x0409 [ 1.044846] usb usb6: udev 1, busnum 6, minor = 640 [ 1.044852] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.044942] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.045058] usb usb6: Product: OHCI Host Controller [ 1.045138] usb usb6: Manufacturer: Linux 3.7.0-rc8 ohci_hcd [ 1.045219] usb usb6: SerialNumber: 0000:00:14.5 [ 1.045766] usb usb6: usb_probe_device [ 1.045779] usb usb6: configuration #1 chosen from 1 choice [ 1.045803] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.046226] hub 6-0:1.0: usb_probe_interface [ 1.046239] hub 6-0:1.0: usb_probe_interface - got id [ 1.046244] hub 6-0:1.0: USB hub found [ 1.046347] hub 6-0:1.0: 2 ports detected [ 1.046427] hub 6-0:1.0: standalone hub [ 1.046431] hub 6-0:1.0: no power switching (usb 1.0) [ 1.046434] hub 6-0:1.0: no over-current protection [ 1.046439] hub 6-0:1.0: power on to power good time: 4ms [ 1.046448] hub 6-0:1.0: local power source is good [ 1.046496] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.046610] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.047118] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.047263] ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk [ 1.047311] ohci_hcd 0000:00:16.0: created debug files [ 1.047316] ohci_hcd 0000:00:16.0: supports USB remote wakeup [ 1.047339] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb45000 [ 1.080736] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.104657] ohci_hcd 0000:00:16.0: OHCI controller state [ 1.104672] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.104680] ohci_hcd 0000:00:16.0: control 0x083 HCFS=operational CBSR=3 [ 1.104687] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0 [ 1.104694] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF [ 1.104700] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.104712] ohci_hcd 0000:00:16.0: hcca frame #0005 [ 1.104719] ohci_hcd 0000:00:16.0: roothub.a 02001204 POTPGT=2 NOCP NPS NDP=4(4) [ 1.104725] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.104731] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE [ 1.104738] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS [ 1.104744] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS [ 1.104750] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS [ 1.104756] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS [ 1.104788] usb usb7: default language 0x0409 [ 1.104802] usb usb7: udev 1, busnum 7, minor = 768 [ 1.104808] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.104898] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.105015] usb usb7: Product: OHCI Host Controller [ 1.105095] usb usb7: Manufacturer: Linux 3.7.0-rc8 ohci_hcd [ 1.105175] usb usb7: SerialNumber: 0000:00:16.0 [ 1.105769] usb usb7: usb_probe_device [ 1.105782] usb usb7: configuration #1 chosen from 1 choice [ 1.105806] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.106230] hub 7-0:1.0: usb_probe_interface [ 1.106242] hub 7-0:1.0: usb_probe_interface - got id [ 1.106248] hub 7-0:1.0: USB hub found [ 1.106351] hub 7-0:1.0: 4 ports detected [ 1.106430] hub 7-0:1.0: standalone hub [ 1.106434] hub 7-0:1.0: no power switching (usb 1.0) [ 1.106438] hub 7-0:1.0: no over-current protection [ 1.106443] hub 7-0:1.0: power on to power good time: 4ms [ 1.106452] hub 7-0:1.0: local power source is good [ 1.106875] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.107324] uhci_hcd: USB Universal Host Controller Interface driver [ 1.107977] usbcore: registered new interface driver usblp [ 1.108072] Initializing USB Mass Storage driver... [ 1.108388] usbcore: registered new interface driver usb-storage [ 1.108480] USB Mass Storage support registered. [ 1.108951] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.109611] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.109714] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.110184] mousedev: PS/2 mouse device common for all mice [ 1.111242] rtc_cmos 00:05: RTC can wake from S4 [ 1.111568] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.111696] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.112568] device-mapper: uevent: version 1.0.3 [ 1.113144] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 1.113542] cpuidle: using governor ladder [ 1.113724] cpuidle: using governor menu [ 1.113807] EFI Variables Facility v0.08 2004-May-17 [ 1.115839] usbcore: registered new interface driver usbhid [ 1.115941] usbhid: USB HID core driver [ 1.116838] Netfilter messages via NETLINK v0.30. [ 1.116970] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.117477] ctnetlink v0.93: registering with nfnetlink. [ 1.117822] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.117975] TCP: cubic registered [ 1.118057] Initializing XFRM netlink socket [ 1.118884] NET: Registered protocol family 10 [ 1.119298] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.119449] sit: IPv6 over IPv4 tunneling driver [ 1.120544] NET: Registered protocol family 17 [ 1.120685] Key type dns_resolver registered [ 1.122055] registered taskstats version 1 [ 1.122808] console [netcon0] enabled [ 1.122900] netconsole: network logging started [ 1.123105] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.140625] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.150804] ata5: SATA link down (SStatus 0 SControl 300) [ 1.200550] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 1.350399] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.350538] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.350665] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.350769] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.350873] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.351089] ata1.00: ATA-8: OCZ-VERTEX PLUS R2, 1.2, max UDMA/133 [ 1.351188] ata1.00: 241612976 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.351339] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.351561] ata6.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.351660] ata6.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.351772] ata3.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.351868] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.351980] ata2.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.352063] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.352167] ata4.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.352252] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.352348] ata3.00: failed to get Identify Device Data, Emask 0x1 [ 1.352370] ata6.00: failed to get Identify Device Data, Emask 0x1 [ 1.352397] ata2.00: failed to get Identify Device Data, Emask 0x1 [ 1.352469] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.352476] ata1.00: configured for UDMA/133 [ 1.352680] ata4.00: failed to get Identify Device Data, Emask 0x1 [ 1.353014] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX PLUS 1.2 PQ: 0 ANSI: 5 [ 1.353423] ata2.00: failed to get Identify Device Data, Emask 0x1 [ 1.353434] ata2.00: configured for UDMA/133 [ 1.353565] ata6.00: failed to get Identify Device Data, Emask 0x1 [ 1.353579] ata6.00: configured for UDMA/133 [ 1.353698] ata3.00: failed to get Identify Device Data, Emask 0x1 [ 1.353705] ata3.00: configured for UDMA/133 [ 1.354065] ata4.00: failed to get Identify Device Data, Emask 0x1 [ 1.354087] ata4.00: configured for UDMA/133 [ 1.354650] sd 0:0:0:0: [sda] 241612976 512-byte logical blocks: (123 GB/115 GiB) [ 1.354980] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.354996] sd 0:0:0:0: [sda] Write Protect is off [ 1.355002] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.355056] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.356029] scsi 1:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.356464] sda: sda1 sda2 sda3 [ 1.357500] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.357639] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.357872] sd 1:0:0:0: [sdb] Write Protect is off [ 1.357961] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.357966] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.358026] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.358162] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.358693] scsi 2:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.359780] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.359921] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.360355] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.360366] sd 2:0:0:0: [sdc] Write Protect is off [ 1.360374] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.360415] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.361067] scsi 3:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.361982] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.362113] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 1.362364] sd 3:0:0:0: [sdd] Write Protect is off [ 1.362383] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.362550] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.362630] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.362889] scsi 5:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.363835] sd 5:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.363932] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 1.364058] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 1.364348] sd 5:0:0:0: [sde] Write Protect is off [ 1.364443] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.364532] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.379823] sdc: sdc1 [ 1.381783] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.383539] sdb: sdb1 [ 1.384782] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.388441] sdd: sdd1 [ 1.389921] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.390863] sde: sde1 [ 1.392062] sd 5:0:0:0: [sde] Attached SCSI disk [ 1.395844] Freeing unused kernel memory: 724k freed [ 1.396480] Write protecting the kernel read-only data: 12288k [ 1.408211] Freeing unused kernel memory: 1504k freed [ 1.424818] Freeing unused kernel memory: 2044k freed [ 1.462218] echo (945) used greatest stack depth: 5608 bytes left [ 1.663587] mdev (1163) used greatest stack depth: 5528 bytes left [ 1.678382] kjournald starting. Commit interval 5 seconds [ 1.678473] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 1.678755] mount (1173) used greatest stack depth: 5520 bytes left [ 1.690129] tsc: Refined TSC clocksource calibration: 1000.013 MHz [ 1.690146] Switching to clocksource tsc [ 1.791771] init-early.sh (1189) used greatest stack depth: 3656 bytes left [ 2.380369] udevd[1284]: starting version 171 [ 2.739120] md: bind [ 2.751830] md: bind [ 2.786292] md: bind [ 2.807401] md: bind [ 2.988554] raid6: sse2x1 651 MB/s [ 3.158384] raid6: sse2x2 976 MB/s [ 3.328227] raid6: sse2x4 1650 MB/s [ 3.328231] raid6: using algorithm sse2x4 (1650 MB/s) [ 3.328235] raid6: using ssse3x2 recovery algorithm [ 3.331337] xor: automatically using best checksumming function: [ 3.428118] generic_sse: 2486.000 MB/sec [ 3.434237] md: raid6 personality registered for level 6 [ 3.434246] md: raid5 personality registered for level 5 [ 3.434249] md: raid4 personality registered for level 4 [ 3.434571] md/raid:md127: device sde1 operational as raid disk 3 [ 3.434576] md/raid:md127: device sdb1 operational as raid disk 0 [ 3.434580] md/raid:md127: device sdc1 operational as raid disk 1 [ 3.434583] md/raid:md127: device sdd1 operational as raid disk 2 [ 3.435347] md/raid:md127: allocated 4302kB [ 3.435671] md/raid:md127: raid level 6 active with 4 out of 4 devices, algorithm 2 [ 3.435680] RAID conf printout: [ 3.435683] --- level:6 rd:4 wd:4 [ 3.435687] disk 0, o:1, dev:sdb1 [ 3.435691] disk 1, o:1, dev:sdc1 [ 3.435694] disk 2, o:1, dev:sdd1 [ 3.435697] disk 3, o:1, dev:sde1 [ 3.435770] md127: detected capacity change from 0 to 3000598790144 [ 3.440391] md127: unknown partition table [ 4.995804] bio: create slab at 1 [ 5.712278] EXT3-fs (sda2): using internal journal [ 5.815541] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 5.821531] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 5.825095] kjournald starting. Commit interval 5 seconds [ 5.825314] EXT3-fs (dm-1): using internal journal [ 5.825323] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 5.829068] EXT4-fs (dm-2): mounting ext2 file system using the ext4 subsystem [ 5.833207] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null) [ 5.836863] EXT4-fs (dm-3): mounting ext2 file system using the ext4 subsystem [ 5.839510] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null) [ 5.844094] kjournald starting. Commit interval 5 seconds [ 5.844325] EXT3-fs (dm-8): using internal journal [ 5.844334] EXT3-fs (dm-8): mounted filesystem with ordered data mode [ 5.848363] kjournald starting. Commit interval 5 seconds [ 5.848598] EXT3-fs (dm-4): using internal journal [ 5.848610] EXT3-fs (dm-4): mounted filesystem with ordered data mode [ 5.852549] EXT4-fs (dm-6): mounting ext2 file system using the ext4 subsystem [ 5.858619] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (null) [ 5.861615] kjournald starting. Commit interval 5 seconds [ 5.861837] EXT3-fs (dm-7): using internal journal [ 5.861848] EXT3-fs (dm-7): mounted filesystem with ordered data mode [ 5.864519] EXT4-fs (dm-5): mounting ext2 file system using the ext4 subsystem [ 5.869362] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null) [ 6.272999] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 7.797087] r8169 0000:04:00.0 eth0: link down [ 7.797154] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.797173] r8169 0000:04:00.0 eth0: link down [ 11.286659] r8169 0000:04:00.0 eth0: link up [ 11.286681] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1867.788747] ------------[ cut here ]------------ [ 1867.788779] kernel BUG at fs/buffer.c:3221! [ 1867.788793] invalid opcode: 0000 [#1] SMP [ 1867.788812] Modules linked in: raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx k10temp [ 1867.788862] CPU 0 [ 1867.788877] Pid: 566, comm: kswapd0 Not tainted 3.7.0-rc8 #2 System manufacturer System Product Name/C60M1-I [ 1867.788902] RIP: 0010:[] [] free_buffer_head+0x2c/0x30 [ 1867.788936] RSP: 0018:ffff880234de1a08 EFLAGS: 00010287 [ 1867.788951] RAX: ffff880132037ce0 RBX: ffff880132037c98 RCX: 0000000000000000 [ 1867.788969] RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff880132037c98 [ 1867.788987] RBP: ffff880234de1a08 R08: 0000000000000001 R09: 0000000000000003 [ 1867.789005] R10: ffff88023ebfab80 R11: 0000000000000001 R12: ffff8802365e65e0 [ 1867.789022] R13: 0000000000000001 R14: ffff880234de1be8 R15: ffff880234de1b48 [ 1867.789041] FS: 00007fd6a133b8c0(0000) GS:ffff88023ec00000(0000) knlGS:0000000000000000 [ 1867.789061] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1867.789076] CR2: 00007fd6a1350000 CR3: 000000023147d000 CR4: 00000000000007f0 [ 1867.789093] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1867.789146] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1867.789197] Process kswapd0 (pid: 566, threadinfo ffff880234de0000, task ffff88023593d1d0) [ 1867.789282] Stack: [ 1867.789322] ffff880234de1a48 ffffffff8115059c ffff880234de1a38 ffff880132037c98 [ 1867.789414] ffff8802365e65e0 ffff880234de1df8 ffffea0004a68e00 ffffea0004a68e20 [ 1867.789505] ffff880234de1a58 ffffffff81156edd ffff880234de1a68 ffffffff810d7ecd [ 1867.789598] Call Trace: [ 1867.789646] [] try_to_free_buffers+0x7c/0xb0 [ 1867.789698] [] blkdev_releasepage+0x3d/0x50 [ 1867.789750] [] try_to_release_page+0x2d/0x40 [ 1867.789803] [] shrink_page_list+0x6e2/0x8d0 [ 1867.789857] [] ? isolate_lru_pages.clone.45+0x76/0x1a0 [ 1867.789912] [] shrink_inactive_list+0x1ef/0x3c0 [ 1867.789963] [] ? global_dirtyable_memory+0x15/0x40 [ 1867.790017] [] shrink_lruvec+0x400/0x560 [ 1867.790067] [] ? prune_super+0x182/0x190 [ 1867.790120] [] kswapd+0x7b7/0xbb0 [ 1867.790172] [] ? wake_up_bit+0x40/0x40 [ 1867.790223] [] ? try_to_free_pages+0x610/0x610 [ 1867.790275] [] kthread+0xc6/0xd0 [ 1867.790326] [] ? flush_kthread_worker+0xb0/0xb0 [ 1867.790380] [] ret_from_fork+0x7c/0xb0 [ 1867.790434] [] ? flush_kthread_worker+0xb0/0xb0 [ 1867.790483] Code: 48 8d 47 48 48 39 47 48 48 89 e5 75 1e 48 89 fe 48 8b 3d 50 9b b3 00 e8 e3 b8 fc ff 65 ff 0c 25 20 f6 00 00 e8 46 ff ff ff c9 c3 <0f> 0b 66 90 55 89 fe 81 ce 00 80 00 00 48 89 e5 53 48 83 ec 08 [ 1867.790777] RIP [] free_buffer_head+0x2c/0x30 [ 1867.790830] RSP [ 1867.791193] ---[ end trace 2bec6c16d7c5ec87 ]---