smartctl 5.41 2011-04-06 r3314 [i386-apple-darwin9.8.0] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Intel X18-M/X25-M/X25-V G2 SSDs Device Model: INTEL SSDSA2M080G2GC Serial Number: CVPO948202KN080BGN LU WWN Device Id: 5 001517 9590fa212 Firmware Version: 2CV102M3 User Capacity: 80,026,361,856 bytes [80.0 GB] Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Tue Nov 20 15:02:05 2012 YEKT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0 4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 10 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2748 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 677 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 10 225 Host_Writes_32MiB 0x0030 100 100 000 Old_age Offline - 412684 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 65535 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 091 091 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Reserved (0x28) Completed without error 00% 2748 - # 2 Vendor (0x68) Completed without error 00% 2729 - # 3 Vendor (0xf0) Completed without error 00% 2729 - # 4 Reserved (0x20) Completed without error 00% 2675 - # 5 Vendor (0xe8) Completed without error 00% 2675 - # 6 Vendor (0x78) Completed without error 00% 2626 - # 7 Reserved (0x20) Completed without error 00% 2626 - # 8 Vendor (0xa8) Completed without error 00% 823 - # 9 Vendor (0xe0) Completed without error 00% 460 - Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.