When connected to SDA
======================
[24843.186430] usb 3-2: new full-speed USB device number 19 using xhci_hcd
[24843.204692] usb 3-2: New USB device found, idVendor=1357, idProduct=0707
[24843.204702] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[24843.204707] usb 3-2: Product: PEMicro/Freescale - CDC Serial Port
[24843.204712] usb 3-2: Manufacturer: P&E Microcomputer Systems Inc.
[24843.204983] usb 3-2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
[24843.205575] cdc_acm 3-2:1.0: This device cannot do calls on its own. It is not a modem.
[24843.205605] cdc_acm 3-2:1.0: ttyACM0: USB ACM device
[24843.206352] scsi8 : usb-storage 3-2:1.2
[24844.205304] scsi 8:0:0:0: Direct-Access     FSL      FSL/PEMICRO MSD  0001 PQ: 0 ANSI: 4
[24844.205750] sd 8:0:0:0: Attached scsi generic sg2 type 0
[24844.206055] sd 8:0:0:0: [sdc] 1983999 512-byte logical blocks: (1.01 GB/968 MiB)
[24844.206205] sd 8:0:0:0: [sdc] Write Protect is off
[24844.206208] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
[24844.206362] sd 8:0:0:0: [sdc] Asking for cache data failed
[24844.206365] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[24844.207526] sd 8:0:0:0: [sdc] Asking for cache data failed
[24844.207528] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[24844.219460]  sdc:
[24844.220291] sd 8:0:0:0: [sdc] Asking for cache data failed
[24844.220294] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[24844.220295] sd 8:0:0:0: [sdc] Attached SCSI removable disk


Using Reset button (connected to SDA)
-------------------------------------
[24902.527453] usb 3-2: new full-speed USB device number 25 using xhci_hcd
[24902.527588] usb 3-2: Device not responding to set address.
[24902.731233] usb 3-2: Device not responding to set address.
[24902.934807] usb 3-2: device not accepting address 25, error -71
[24903.046663] usb 3-2: new full-speed USB device number 26 using xhci_hcd
[24903.064013] usb 3-2: New USB device found, idVendor=2504, idProduct=0200
[24903.064022] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24903.064028] usb 3-2: Product: OpenSDA MSD APP
[24903.064032] usb 3-2: Manufacturer: FREESCALE SEMICONDUCTOR INC.
[24903.064036] usb 3-2: SerialNumber: 0123456789ABCDEF
[24903.064995] scsi9 : usb-storage 3-2:1.0
[24904.061733] scsi 9:0:0:0: Direct-Access     FSL      FSL/PEMICRO MSD  0001 PQ: 0 ANSI: 4
[24904.062952] sd 9:0:0:0: Attached scsi generic sg2 type 0
[24904.063310] sd 9:0:0:0: [sdc] 1983999 512-byte logical blocks: (1.01 GB/968 MiB)
[24904.063521] sd 9:0:0:0: [sdc] Write Protect is off
[24904.063530] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00
[24904.063773] sd 9:0:0:0: [sdc] Asking for cache data failed
[24904.063782] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[24904.065345] sd 9:0:0:0: [sdc] Asking for cache data failed
[24904.065357] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[24904.077235]  sdc:
[24904.078490] sd 9:0:0:0: [sdc] Asking for cache data failed
[24904.078498] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[24904.078504] sd 9:0:0:0: [sdc] Attached SCSI removable disk



Connected to KL25Z port
------------------------
[24985.268585] usb 3-2: new full-speed USB device number 27 using xhci_hcd
[24985.285664] usb 3-2: New USB device found, idVendor=15a2, idProduct=a50f
[24985.285673] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24985.285678] usb 3-2: Product: USB-UART
[24985.285682] usb 3-2: Manufacturer: Freescale
[24985.285686] usb 3-2: SerialNumber: TEST_1.0
[24985.286360] cdc_acm 3-2:1.0: This device cannot do calls on its own. It is not a modem.
[24985.286391] cdc_acm 3-2:1.0: ttyACM0: USB ACM device


Connected to KL25Z port with reset button
-----------------------------------------
[25055.069562] usb 3-2: new full-speed USB device number 31 using xhci_hcd
[25055.086783] usb 3-2: New USB device found, idVendor=15a2, idProduct=a50f
[25055.086792] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[25055.086797] usb 3-2: Product: USB-UART
[25055.086801] usb 3-2: Manufacturer: Freescale
[25055.086805] usb 3-2: SerialNumber: TEST_1.0
[25055.087594] cdc_acm 3-2:1.0: This device cannot do calls on its own. It is not a modem.
[25055.087642] cdc_acm 3-2:1.0: ttyACM0: USB ACM device