-lpa <6>[ 31.225286] c0 +++lpa <6>[ 31.241697] c0 ---lpa <6>[ 31.247561] c0 +++lpa <6>[ 31.250276] c0 ---lpa <6>[ 31.352936] c0 +++lpa <6>[ 31.371308] c0 ---lpa <6>[ 31.375307] c0 +++lpa <6>[ 31.388657] c0 ---lpa <6>[ 31.460286] c0 +++lpa <6>[ 31.477517] c0 ---lpa <6>[ 31.478176] c0 +++lpa <6>[ 31.492517] c0 ---lpa <6>[ 31.501553] c0 +++lpa <6>[ 31.527519] c0 ---lpa <6>[ 31.528192] c0 +++lpa <6>[ 31.538481] c0 ---lpa <6>[ 31.630300] c0 +++lpa <6>[ 31.657675] c0 ---lpa <6>[ 31.658394] c0 +++lpa <6>[ 31.677517] c0 ---lpa <6>[ 31.678201] c0 +++lpa <6>[ 31.692518] c0 ---lpa <6>[ 31.693190] c0 +++lpa <6>[ 31.709072] c0 ---lpa <6>[ 31.725294] c0 +++lpa <6>[ 31.739349] c0 ---lpa <6>[ 31.741400] c0 +++lpa <6>[ 31.769500] c0 ---lpa <6>[ 31.796991] c0 +++lpa <6>[ 31.814375] c0 ---lpa <6>[ 31.815096] c0 +++lpa <6>[ 31.827521] c0 ---lpa <6>[ 31.828102] c0 +++lpa <6>[ 31.877520] c0 ---lpa <6>[ 31.878196] c0 +++lpa <6>[ 31.892521] c0 ---lpa <6>[ 31.893172] c0 +++lpa <6>[ 31.911388] c0 ---lpa <6>[ 31.912233] c0 +++lpa <6>[ 31.927520] c0 ---lpa <6>[ 31.929377] c0 +++lpa <6>[ 31.977520] c0 ---lpa <6>[ 31.978107] c0 +++lpa <6>[ 31.986969] c0 ---lpa <6>[ 31.987137] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 31.987461] c0 mdm_hsic_rpm_check <6>[ 31.987580] c0 request_active_lock_set <6>[ 31.987771] c0 set_hsic_lpa_states: set lpa handling to true <6>[ 31.987898] c0 request_active_lock_set <6>[ 31.987997] c0 set hsic lpa wake <4>[ 31.990781] c0 usb usb1: root hub lost power or was reset <7>[ 31.990920] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 32.015111] c0 dev rdy val = 0 <6>[ 32.015197] c0 set_host_stat:set host port power status to [1] <6>[ 32.015333] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 32.016013] c0 mdm_hsic_irq_handler: detect Falling edge <6>[ 32.016144] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 32.056531] c0 done <7>[ 32.070176] c0 usb usb1: usb auto-resume <7>[ 32.070287] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 32.100156] c0 hub 1-0:1.0: hub_reset_resume <7>[ 32.100275] c0 hub 1-0:1.0: enabling power on all ports <7>[ 32.100549] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 32.100754] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <7>[ 32.101008] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 32.101244] c0 hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s <7>[ 32.101398] c0 usb 1-2: usb wakeup-resume <6>[ 32.101527] c0 mif: usb_port_resume: 1281, 0 <7>[ 32.135142] c0 usb 1-2: finish reset-resume <7>[ 32.190325] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 32.190478] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 32.190823] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 32.228553] c0 usb 1-2: read_hsic: <7>[ 32.231158] c0 usb 1-2: link qh8-0001/eb9e3700 start 6 [2/0 us] <6>[ 32.231378] c0 [CHKRA:3]> <7>[ 32.231547] c0 usb 1-2: link qh8-0001/eb9e3bc0 start 7 [2/0 us] <6>[ 32.231762] c0 [CHKRA:5]> <7>[ 32.233849] c0 usb 1-2: link qh8-0001/eb9e3740 start 0 [2/0 us] <6>[ 32.234071] c0 [CHKRA:6]> <7>[ 32.234274] c0 usb 1-2: link qh8-0001/eb9e3cc0 start 1 [2/0 us] <6>[ 32.234497] c0 [CHKRA:7]> <7>[ 32.234689] c0 usb 1-2: link qh8-0001/eb9e3b80 start 2 [2/0 us] <6>[ 32.234908] c0 [CHKRA:8]> <6>[ 32.235212] c0 mdm_hsic_rpm_check <6>[ 32.235301] c0 ignore resume req, lpa handling <6>[ 32.236609] c0 [NACB:3]< <7>[ 32.236694] c0 usb 1-2: serial state: 3 <6>[ 32.236789] c0 notification_available_cb: set lpa handling to false <6>[ 32.236956] c0 [CHKRA:3]> <6>[ 32.238620] c0 [NACB:6]< <6>[ 32.238754] c0 [NRA:6]> <7>[ 32.238950] c0 usb 1-2: unlink qh8-0001/eb9e3740 start 0 [2/0 us] <6>[ 32.240357] c0 [RACB:6]< <7>[ 32.240526] c0 s5p-ehci s5p-ehci: reused qh eb9e3740 schedule <7>[ 32.240680] c0 usb 1-2: link qh8-0001/eb9e3740 start 0 [2/0 us] <6>[ 32.240908] c0 [CHKRA:6]> <6>[ 32.241124] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <7>[ 32.740467] c0 usb 1-2: unlink qh8-0001/eb9e3b80 start 2 [2/0 us] <7>[ 32.740839] c0 usb 1-2: unlink qh8-0001/eb9e3cc0 start 1 [2/0 us] <7>[ 32.741174] c0 usb 1-2: unlink qh8-0001/eb9e3740 start 0 [2/0 us] <7>[ 32.754294] c0 usb 1-2: unlink qh8-0001/eb9e3bc0 start 7 [2/0 us] <7>[ 32.767170] c0 usb 1-2: unlink qh8-0001/eb9e3700 start 6 [2/0 us] <6>[ 32.768168] c0 read_hsic_cb: status:-2 actual:0 <7>[ 32.769780] c0 usb 1-2: usb auto-suspend <7>[ 32.780299] c0 hub 1-0:1.0: hub_suspend <7>[ 32.780454] c0 usb usb1: bus auto-suspend <7>[ 32.780563] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 32.781654] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 32.781779] c0 request_active_lock_release <6>[ 32.811114] c0 dev rdy val = 1 <6>[ 32.811203] c0 set_host_stat:set host port power status to [0] <6>[ 32.821300] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 32.831358] c0 done <6>[ 32.831418] c0 set hsic lpa enter <6>[ 32.831536] c0 +++lpa <6>[ 32.834421] c0 ---lpa <6>[ 32.890256] c0 +++lpa <6>[ 32.932217] c0 ---lpa <6>[ 32.932650] c0 +++lpa <6>[ 32.962128] c0 ---lpa <6>[ 32.962680] c0 +++lpa <6>[ 32.982222] c0 ---lpa <6>[ 33.000116] c0 +++lpa <6>[ 33.024562] c0 ---lpa <6>[ 33.030216] c0 +++lpa <6>[ 33.048817] c0 ---lpa <6>[ 33.055137] c0 +++lpa <6>[ 33.082215] c0 ---lpa <6>[ 33.095251] c0 +++lpa <6>[ 33.132519] c0 ---lpa <6>[ 33.133099] c0 +++lpa <6>[ 33.182520] c0 ---lpa <6>[ 33.192110] c0 +++lpa <6>[ 33.232518] c0 ---lpa <6>[ 33.233096] c0 +++lpa <6>[ 33.282517] c0 ---lpa <6>[ 33.313118] c0 +++lpa <6>[ 33.332519] c0 ---lpa <6>[ 33.333109] c0 +++lpa <6>[ 33.382518] c0 ---lpa <6>[ 33.390383] c0 +++lpa <6>[ 33.432519] c0 ---lpa <6>[ 33.433080] c0 +++lpa <6>[ 33.482517] c0 ---lpa <6>[ 33.490354] c0 +++lpa <6>[ 33.503934] c0 ---lpa <6>[ 33.504653] c0 +++lpa <6>[ 33.532518] c0 ---lpa <6>[ 33.560190] c0 +++lpa <6>[ 33.577568] c0 ---lpa <6>[ 33.590395] c0 +++lpa <6>[ 33.619021] c0 ---lpa <6>[ 33.619717] c0 +++lpa <6>[ 33.632517] c0 ---lpa <6>[ 33.633088] c0 +++lpa <6>[ 33.660744] c0 ---lpa <6>[ 33.661464] c0 +++lpa <6>[ 33.682519] c0 ---lpa <6>[ 33.690372] c0 +++lpa <6>[ 33.732519] c0 ---lpa <6>[ 33.733110] c0 +++lpa <6>[ 33.772566] c0 ---lpa <6>[ 33.797238] c0 +++lpa <6>[ 33.832520] c0 ---lpa <6>[ 33.833105] c0 +++lpa <6>[ 33.882521] c0 ---lpa <6>[ 33.890357] c0 +++lpa <6>[ 33.914490] c0 ---lpa <6>[ 33.915407] c0 +++lpa <6>[ 33.931755] c0 ---lpa <6>[ 33.932569] c0 +++lpa <6>[ 33.982519] c0 ---lpa <6>[ 33.990388] c0 +++lpa <6>[ 34.032517] c0 ---lpa <6>[ 34.033077] c0 +++lpa <6>[ 34.053376] c0 ---lpa <6>[ 34.060194] c0 +++lpa <6>[ 34.082517] c0 ---lpa <6>[ 34.090383] c0 +++lpa <6>[ 34.132518] c0 ---lpa <6>[ 34.133087] c0 +++lpa <6>[ 34.181894] c0 ---lpa <6>[ 34.190389] c0 +++lpa <6>[ 34.211845] c0 ---lpa <6>[ 34.212564] c0 +++lpa <6>[ 34.232519] c0 ---lpa <6>[ 34.237728] c0 +++lpa <6>[ 34.260189] c0 ---lpa <6>[ 34.260903] c0 +++lpa <6>[ 34.282517] c0 ---lpa <6>[ 34.290368] c0 +++lpa <6>[ 34.315631] c0 ---lpa <6>[ 34.316346] c0 +++lpa <6>[ 34.332518] c0 ---lpa <6>[ 34.403169] c0 +++lpa <6>[ 34.431980] c0 ---lpa <6>[ 34.432395] c0 +++lpa <6>[ 34.466979] c0 ---lpa <6>[ 34.640178] c0 +++lpa <6>[ 34.682159] c0 ---lpa <6>[ 34.730138] c0 +++lpa <6>[ 34.759670] c0 ---lpa <6>[ 34.768801] c0 light_enable_store,new_value=1 <6>[ 34.771059] c0 cm36651_poll_delay_store, poll_delay = 200000000 <6>[ 34.772449] c0 cm36651_poll_delay_store, poll_delay = 1000000000 <6>[ 34.773783] c0 request_suspend_state: wakeup (3->0) at 34773759771 (2013-02-24 17:26:17.455772477 UTC) <6>[ 34.773972] c0 s3cfb s3cfb.0: +s3cfb_late_resume <6>[ 34.774412] c0 s5p-dsim s5p-dsim.0: +s5p_dsim_late_resume <6>[ 34.775279] c0 lsm330dlc_accel_ioctl: opened = 0, enable = 1 <6>[ 34.775848] c0 lsm330dlc_accel_set_delay: old=66667000ns,new=66667000ns,odr=0x30,opened=1 <6>[ 34.776548] c0 lsm330dlc_accel_set_delay: old=66667000ns,new=200000000ns,odr=0x20,opened=1 <6>[ 34.777343] c0 lsm330dlc_accel_set_delay: old=200000000ns,new=66667000ns,odr=0x30,opened=1 <6>[ 34.784589] c0 lcd_power_on : enable=1 <6>[ 34.886698] c0 s5p-dsim s5p-dsim.0: -s5p_dsim_late_resume <6>[ 34.887098] c0 s3cfb s3cfb.0: fimd sclk rate 400000000, clkdiv 0xffff11 <6>[ 34.887257] c0 s3cfb s3cfb.0: parent clock: 400000000, vclk: 57155000, vclk div: 7 <6>[ 34.887437] c0 mdnie mdnie: mode=0, scenario=0, outdoor=0, cabc=0, CYANOGENMOD <6>[ 34.887632] c0 lcd panel: +s6e8ax0_late_resume <6>[ 34.887725] c0 lcd panel: s6e8ax0_power_on <3>[ 34.887827] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <3>[ 34.887985] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <3>[ 34.888127] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <6>[ 35.070976] c0 lcd panel: brightness=0, bl=0, candela=20 <6>[ 35.071020] c0 lcd panel: -s6e8ax0_late_resume <6>[ 35.071052] c0 s3cfb s3cfb.0: -s3cfb_late_resume <6>[ 35.071084] c0 sii9234_late_resume() <6>[ 35.071112] c0 graphics fb0: lcdfreq_late_resume <4>[ 35.071151] c0 dhd_late_resume: enter <5>[ 35.073970] c0 melfas-ts 3-0048: mms_ts_resume: users=1 <7>[ 35.074010] c0 [TSP] melfas_power on <6>[ 35.089129] c0 lcd panel: brightness=40, bl=2, candela=40 <3>[ 35.089315] c0 [TouchKey] touchkey is not enabled. 233 <7>[ 35.089358] c0 [Touchkey] error to write i2c <5>[ 35.195054] c0 melfas-ts 3-0048: TA disconnect!!! <7>[ 35.195237] c0 [TouchKey] sec_touchkey_late_resume <6>[ 35.195278] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3) <7>[ 35.250953] c0 [TouchKey] data[0]=8 data[1]=6 data[2]=5 data[3]=0 <7>[ 35.356124] c0 [Touchkey] autocal Enabled <7>[ 35.356517] c0 [Touchkey] LED returned on <5>[ 35.773597] c0 melfas-ts 3-0048: finger [0] down, palm 0 <6>[ 35.785509] c0 [VIB] haptic_work: pwm_config duty=27787 <7>[ 35.970046] c0 [TSP] change_dvfs_lock <3>[ 36.000055] c0 [HOTPLUG IN] check_up 1000000>=500000 && 165>100 <3>[ 36.000553] c0 CPU_UP 3 <4>[ 36.016972] c3 CPU3: Booted secondary processor <6>[ 36.017042] c3 notifier_call_chain : NOTIFY BAD tick_notify <6>[ 36.020048] c3 Switched to NOHz mode on CPU #3 <5>[ 36.026018] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 36.032812] c0 [VIB] haptic_work: pwm_config duty=27787 <6>[ 36.110636] c3 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 36.110676] c3 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 36.110778] c3 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 36.110816] c3 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 36.111036] c3 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 36.111073] c3 wm8994-codec wm8994-codec: write 221 = 700 <6>[ 36.111267] c0 wm8994-codec wm8994-codec: write 222 = 86c2 <6>[ 36.111473] c0 wm8994-codec wm8994-codec: write 223 = e0 <6>[ 36.111663] c0 wm8994-codec wm8994-codec: write 224 = c88 <6>[ 36.111860] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 36.120185] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 36.120230] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 36.120424] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 36.120623] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 36.120663] c0 wm8994-codec wm8994-codec: write 300 = 4010 <6>[ 36.120852] c0 wm8994-codec wm8994-codec: write 303 = 70 <6>[ 36.121040] c0 wm8994-codec wm8994-codec: write 305 = 20 <6>[ 36.121236] c0 wm8994-codec wm8994-codec: write 210 = 73 <6>[ 36.121883] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 36.123955] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 36.124184] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 36.124405] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 36.124620] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 36.124840] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 36.125092] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 36.180146] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 36.180381] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 36.180645] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 36.182026] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 36.182211] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 36.182394] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 36.182580] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 36.190094] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 36.190287] c0 wm8994-codec wm8994-codec: write 55 = 540 <6>[ 36.190473] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 36.250699] c0 wm8994-codec wm8994-codec: write 59 = d7dd <6>[ 36.250972] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 36.260409] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 36.260686] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 36.261036] c0 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 36.261312] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 36.261614] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 36.261922] c0 i2s_txctrl:Turn on <5>[ 37.007775] c0 melfas-ts 3-0048: finger [0] down, palm 0 <6>[ 37.014405] c0 [VIB] haptic_work: pwm_config duty=27787 <6>[ 37.037012] c0 [VIB] haptic_work: pwm_config duty=27787 <5>[ 37.133138] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 37.990640] c0 mdm_hsic_irq_handler: detect Falling edge <6>[ 37.990719] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 37.990795] c0 mdm_hsic_rpm_check <6>[ 37.990849] c0 request_active_lock_set <6>[ 37.990933] c0 set_hsic_lpa_states: set lpa handling to true <6>[ 37.990989] c0 request_active_lock_set <6>[ 37.991025] c0 set hsic lpa wake <4>[ 37.992311] c0 usb usb1: root hub lost power or was reset <7>[ 37.992380] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 38.015092] c0 dev rdy val = 0 <6>[ 38.015132] c0 set_host_stat:set host port power status to [1] <6>[ 38.015192] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 38.015857] c0 mdm_hsic_irq_handler: detect Falling edge <6>[ 38.015946] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 38.048892] c0 done <7>[ 38.060146] c0 usb usb1: usb auto-resume <7>[ 38.060200] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 38.090298] c0 hub 1-0:1.0: hub_reset_resume <7>[ 38.090387] c0 hub 1-0:1.0: enabling power on all ports <7>[ 38.090579] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 38.090701] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 38.090832] c0 mif: usb_port_resume: 1281, 0 <7>[ 38.091002] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 38.091123] c0 hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s <7>[ 38.091241] c0 usb 1-2: usb wakeup-resume <7>[ 38.125078] c0 usb 1-2: finish reset-resume <7>[ 38.180152] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 38.180186] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 38.180261] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 38.217797] c0 usb 1-2: read_hsic: <7>[ 38.217970] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 38.218017] c0 [CHKRA:3]> <7>[ 38.218046] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 38.218094] c0 [CHKRA:5]> <7>[ 38.218126] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 38.218169] c0 [CHKRA:6]> <7>[ 38.218194] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 38.218235] c0 [CHKRA:7]> <7>[ 38.218260] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 38.218302] c0 [CHKRA:8]> <6>[ 38.218787] c0 mdm_hsic_rpm_check <6>[ 38.218807] c0 ignore resume req, lpa handling <6>[ 38.223440] c0 [NACB:3]< <7>[ 38.223466] c0 usb 1-2: serial state: 3 <6>[ 38.223491] c0 notification_available_cb: set lpa handling to false <6>[ 38.223545] c0 [CHKRA:3]> <6>[ 38.225427] c0 [NACB:6]< <6>[ 38.225483] c0 [NRA:6]> <7>[ 38.225546] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 38.226917] c0 [RACB:6]< <7>[ 38.226979] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 38.227022] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 38.227081] c0 [CHKRA:6]> <6>[ 38.227134] c0 Read: 01 10 00 80 03 01 04 00 00 53 00 04 00 12 01 00 <7>[ 38.725102] c3 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 38.725228] c3 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 38.725345] c3 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 38.731816] c3 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 38.738244] c3 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 38.739001] c0 read_hsic_cb: status:-2 actual:0 <7>[ 38.740228] c3 usb 1-2: usb auto-suspend <7>[ 38.755124] c3 hub 1-0:1.0: hub_suspend <7>[ 38.755189] c3 usb usb1: bus auto-suspend <7>[ 38.755236] c3 s5p-ehci s5p-ehci: suspend root hub <6>[ 38.756455] c3 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 38.756510] c3 request_active_lock_release <6>[ 38.988641] c0 mdm_hsic_irq_handler: detect Falling edge <6>[ 38.988754] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 38.988888] c0 mdm_hsic_rpm_check <6>[ 38.988968] c0 request_active_lock_set <7>[ 38.989160] c0 usb usb1: usb auto-resume <7>[ 38.989240] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 39.025904] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 39.040229] c0 hub 1-0:1.0: hub_resume <7>[ 39.040414] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 39.040572] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 39.040788] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 39.040929] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 39.041042] c0 mif: usb_port_resume: 1283, 4 <7>[ 39.041116] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 39.041268] c0 usb 1-2: finish resume <6>[ 39.044231] c0 usb 1-2: read_hsic: <7>[ 39.045371] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 39.045487] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 39.045669] c0 [CHKRA:3]> <7>[ 39.045779] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 39.045890] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 39.046057] c0 [CHKRA:5]> <7>[ 39.046161] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 39.046269] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 39.046439] c0 [CHKRA:6]> <7>[ 39.046535] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 39.046640] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 39.046805] c0 [CHKRA:7]> <7>[ 39.046896] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 39.046999] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 39.047163] c0 [CHKRA:8]> <6>[ 39.050492] c0 [NACB:6]< <6>[ 39.050628] c0 [NRA:6]> <7>[ 39.050777] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 39.051871] c0 [RACB:6]< <7>[ 39.052019] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 39.052131] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 39.052303] c0 [CHKRA:6]> <6>[ 39.052506] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 39.058552] c0 [NACB:6]< <6>[ 39.058678] c0 [NRA:6]> <7>[ 39.058830] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 39.059894] c0 [RACB:6]< <7>[ 39.060071] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 39.060217] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 39.060444] c0 [CHKRA:6]> <6>[ 39.060677] c0 Read: 01 10 00 80 03 01 04 00 00 53 00 04 00 12 01 00 <7>[ 39.065171] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 39.065280] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <7>[ 39.560373] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 39.560783] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 39.561143] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 39.574577] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 39.586695] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 39.588121] c0 read_hsic_cb: status:-2 actual:0 <7>[ 39.590194] c0 usb 1-2: usb auto-suspend <7>[ 39.605253] c0 hub 1-0:1.0: hub_suspend <7>[ 39.605384] c0 usb usb1: bus auto-suspend <7>[ 39.605486] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 39.606541] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 39.606658] c0 request_active_lock_release <6>[ 39.989489] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 39.989664] c0 mdm_hsic_rpm_check <6>[ 39.989773] c0 request_active_lock_set <7>[ 39.990002] c0 usb usb1: usb auto-resume <7>[ 39.990220] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 40.031054] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 40.045223] c0 hub 1-0:1.0: hub_resume <7>[ 40.045491] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 40.045725] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 40.046023] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 40.046163] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 40.046371] c0 mif: usb_port_resume: 1283, 4 <7>[ 40.046486] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 40.046714] c0 usb 1-2: finish resume <6>[ 40.049744] c0 usb 1-2: read_hsic: <7>[ 40.051107] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 40.051297] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 40.051641] c0 [CHKRA:3]> <7>[ 40.051864] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 40.052033] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 40.052324] c0 [CHKRA:5]> <7>[ 40.052584] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 40.052754] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.052987] c0 [CHKRA:6]> <7>[ 40.053197] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 40.053360] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 40.053597] c0 [CHKRA:7]> <7>[ 40.053844] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 40.054013] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 40.054249] c0 [CHKRA:8]> <6>[ 40.058581] c0 [NACB:6]< <6>[ 40.058789] c0 [NRA:6]> <7>[ 40.059056] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.060173] c0 [RACB:6]< <7>[ 40.060376] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 40.060554] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.060796] c0 [CHKRA:6]> <6>[ 40.061019] c0 Read: 01 10 00 80 03 01 04 00 00 53 00 04 00 12 01 00 <7>[ 40.070205] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 40.070380] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <7>[ 40.271963] c3 i2s_txctrl: Turn Off - spr is no active <6>[ 40.272343] c3 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 40.272899] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 40.273074] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <7>[ 40.560375] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 40.560769] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 40.561146] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 40.574346] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 40.586824] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 40.588126] c0 read_hsic_cb: status:-2 actual:0 <7>[ 40.589815] c0 usb 1-2: usb auto-suspend <7>[ 40.600208] c0 hub 1-0:1.0: hub_suspend <7>[ 40.600366] c0 usb usb1: bus auto-suspend <7>[ 40.600478] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 40.601553] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 40.601684] c0 request_active_lock_release <6>[ 40.745034] c0 max77686_rtc_set_time: 113/1/24 17:26:48(0) <6>[ 40.770687] c0 max77686_rtc_set_time: task=NetworkTimeUpda[2844] <6>[ 40.812389] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 40.812482] c0 mdm_hsic_rpm_check <6>[ 40.812524] c0 request_active_lock_set <7>[ 40.812667] c0 usb usb1: usb auto-resume <7>[ 40.812703] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 40.824993] c3 logger_release: took 0 msec <6>[ 40.850914] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 40.865093] c0 hub 1-0:1.0: hub_resume <7>[ 40.865160] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 40.865220] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 40.865290] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 40.865344] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 40.865384] c0 mif: usb_port_resume: 1283, 4 <7>[ 40.865412] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 40.865470] c0 usb 1-2: finish resume <6>[ 40.867780] c0 usb 1-2: read_hsic: <7>[ 40.868026] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 40.868070] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 40.868129] c0 [CHKRA:3]> <7>[ 40.868166] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 40.868208] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 40.868262] c0 [CHKRA:5]> <7>[ 40.868302] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 40.868342] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.868395] c0 [CHKRA:6]> <7>[ 40.868428] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 40.868469] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 40.868523] c0 [CHKRA:7]> <7>[ 40.868554] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 40.868593] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 40.868647] c0 [CHKRA:8]> <6>[ 40.869889] c0 [NACB:6]< <6>[ 40.869925] c0 [NRA:6]> <7>[ 40.869977] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.871268] c0 [RACB:6]< <7>[ 40.871322] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 40.871363] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.871420] c0 [CHKRA:6]> <6>[ 40.871470] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <7>[ 40.890104] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 40.890153] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <6>[ 40.981936] c0 [NACB:6]< <6>[ 40.982067] c0 [NRA:6]> <7>[ 40.982206] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.983296] c0 [RACB:6]< <7>[ 40.983416] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 40.983519] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 40.983679] c0 [CHKRA:6]> <6>[ 40.983853] c0 Read: 01 10 00 80 03 01 04 00 00 53 00 04 00 12 01 00 <6>[ 41.275237] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 41.275621] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 41.276036] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 41.276440] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 41.276849] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 41.277256] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 41.277662] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 41.278079] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 41.278482] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 41.281274] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 41.281629] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 41.281975] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 41.282331] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 41.282681] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 41.283023] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 41.435125] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 41.435411] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 41.435727] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 41.436195] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 41.436657] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 41.437183] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 41.437694] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 41.438120] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 41.438539] c0 wm8994-codec wm8994-codec: write 3e = 37 <7>[ 41.480331] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 41.480644] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 41.480930] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 41.492447] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 41.503560] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 41.504657] c0 read_hsic_cb: status:-2 actual:0 <7>[ 41.505940] c0 usb 1-2: usb auto-suspend <7>[ 41.520449] c0 hub 1-0:1.0: hub_suspend <7>[ 41.520618] c0 usb usb1: bus auto-suspend <7>[ 41.520711] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 41.522244] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 41.522356] c0 request_active_lock_release <5>[ 42.582030] c0 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 42.776687] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 43.039247] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 43.039328] c0 mdm_hsic_rpm_check <6>[ 43.039377] c0 request_active_lock_set <7>[ 43.039527] c0 usb usb1: usb auto-resume <7>[ 43.039573] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 43.075885] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 43.090196] c0 hub 1-0:1.0: hub_resume <7>[ 43.090325] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 43.090413] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 43.090525] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 43.090579] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 43.090658] c0 mif: usb_port_resume: 1283, 4 <7>[ 43.090701] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 43.090790] c0 usb 1-2: finish resume <6>[ 43.093174] c0 usb 1-2: read_hsic: <7>[ 43.093628] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 43.093712] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 43.093818] c0 [CHKRA:3]> <7>[ 43.093881] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 43.093947] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 43.094042] c0 [CHKRA:5]> <7>[ 43.094099] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 43.094182] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 43.094291] c0 [CHKRA:6]> <7>[ 43.094352] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 43.094418] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 43.094517] c0 [CHKRA:7]> <7>[ 43.094570] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 43.094634] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 43.094731] c0 [CHKRA:8]> <6>[ 43.099811] c0 [NACB:6]< <6>[ 43.099881] c0 [NRA:6]> <7>[ 43.099970] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 43.101150] c0 [RACB:6]< <7>[ 43.101228] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 43.101292] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 43.101389] c0 [CHKRA:6]> <6>[ 43.101482] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <7>[ 43.115087] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 43.115149] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <5>[ 43.237029] c0 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 43.396848] c0 melfas-ts 3-0048: finger [0] up, palm 0 <7>[ 43.600180] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 43.600365] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 43.600534] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 43.607364] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 43.614374] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 43.615327] c0 read_hsic_cb: status:-2 actual:0 <7>[ 43.616468] c0 usb 1-2: usb auto-suspend <7>[ 43.630115] c0 hub 1-0:1.0: hub_suspend <7>[ 43.630182] c0 usb usb1: bus auto-suspend <7>[ 43.630227] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 43.630815] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 43.630869] c0 request_active_lock_release <6>[ 43.990956] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 43.991049] c0 mdm_hsic_rpm_check <6>[ 43.991102] c0 request_active_lock_set <7>[ 43.991259] c0 usb usb1: usb auto-resume <7>[ 43.991309] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 44.030947] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 44.045092] c0 hub 1-0:1.0: hub_resume <7>[ 44.045192] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 44.045281] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 44.045394] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 44.045477] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 44.045543] c0 mif: usb_port_resume: 1283, 4 <7>[ 44.045588] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 44.045680] c0 usb 1-2: finish resume <6>[ 44.048034] c0 usb 1-2: read_hsic: <7>[ 44.048458] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 44.048524] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 44.048619] c0 [CHKRA:3]> <7>[ 44.048676] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 44.048737] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 44.048851] c0 [CHKRA:5]> <7>[ 44.048916] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 44.048977] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 44.049068] c0 [CHKRA:6]> <7>[ 44.049120] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 44.049179] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 44.049269] c0 [CHKRA:7]> <7>[ 44.049319] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 44.049378] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 44.049469] c0 [CHKRA:8]> <6>[ 44.052531] c0 [NACB:6]< <6>[ 44.052596] c0 [NRA:6]> <7>[ 44.052680] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 44.054017] c0 [RACB:6]< <7>[ 44.054091] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 44.054154] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 44.054248] c0 [CHKRA:6]> <6>[ 44.054336] c0 Read: 01 10 00 80 03 01 04 00 00 53 00 04 00 12 01 00 <7>[ 44.070090] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 44.070160] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <7>[ 44.550183] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 44.550365] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 44.550533] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 44.557095] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 44.564360] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 44.565068] c0 read_hsic_cb: status:-2 actual:0 <7>[ 44.566196] c0 usb 1-2: usb auto-suspend <7>[ 44.580117] c0 hub 1-0:1.0: hub_suspend <7>[ 44.580184] c0 usb usb1: bus auto-suspend <7>[ 44.580230] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 44.581546] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 44.581599] c0 request_active_lock_release <6>[ 45.382654] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 45.382794] c0 mdm_hsic_rpm_check <6>[ 45.382900] c0 request_active_lock_set <7>[ 45.383114] c0 usb usb1: usb auto-resume <7>[ 45.383208] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 45.421078] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 45.435168] c0 hub 1-0:1.0: hub_resume <7>[ 45.435369] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 45.435561] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 45.435784] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 45.435959] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 45.436098] c0 mif: usb_port_resume: 1283, 4 <7>[ 45.436188] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 45.436376] c0 usb 1-2: finish resume <6>[ 45.439301] c0 usb 1-2: read_hsic: <7>[ 45.440239] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 45.440387] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 45.440612] c0 [CHKRA:3]> <7>[ 45.440765] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 45.440902] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 45.441098] c0 [CHKRA:5]> <7>[ 45.441307] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 45.441450] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 45.441650] c0 [CHKRA:6]> <7>[ 45.441839] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 45.441983] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 45.442180] c0 [CHKRA:7]> <7>[ 45.442363] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 45.442499] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 45.442697] c0 [CHKRA:8]> <6>[ 45.445494] c0 [NACB:5]< <6>[ 45.445665] c0 [NRA:5]> <7>[ 45.445861] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 45.446988] c0 [RACB:5]< <7>[ 45.447093] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 45.447231] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 45.447429] c0 [CHKRA:5]> <7>[ 45.460176] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 45.460307] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <7>[ 45.945172] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 45.945370] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 45.945549] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 45.952158] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 45.958919] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 45.959635] c0 read_hsic_cb: status:-2 actual:0 <7>[ 45.961025] c0 usb 1-2: usb auto-suspend <7>[ 45.975087] c0 hub 1-0:1.0: hub_suspend <7>[ 45.975152] c0 usb usb1: bus auto-suspend <7>[ 45.975201] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 45.976488] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 45.976547] c0 request_active_lock_release <6>[ 46.990709] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 46.990910] c0 mdm_hsic_rpm_check <6>[ 46.991042] c0 request_active_lock_set <7>[ 46.991290] c0 usb usb1: usb auto-resume <7>[ 46.991405] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 47.031136] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 47.045210] c0 hub 1-0:1.0: hub_resume <7>[ 47.045426] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 47.045644] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 47.045899] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 47.046116] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 47.046282] c0 mif: usb_port_resume: 1283, 4 <7>[ 47.046391] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 47.046625] c0 usb 1-2: finish resume <6>[ 47.049763] c0 usb 1-2: read_hsic: <7>[ 47.050768] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 47.050946] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 47.051204] c0 [CHKRA:3]> <7>[ 47.051377] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 47.051545] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 47.051781] c0 [CHKRA:5]> <7>[ 47.052019] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 47.052196] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 47.052431] c0 [CHKRA:6]> <7>[ 47.052635] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 47.052808] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 47.053042] c0 [CHKRA:7]> <7>[ 47.053243] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 47.053417] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 47.053652] c0 [CHKRA:8]> <6>[ 47.053840] c0 [NACB:6]< <6>[ 47.054012] c0 [NRA:6]> <7>[ 47.054224] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 47.055372] c0 [RACB:6]< <7>[ 47.055570] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 47.055748] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 47.055992] c0 [CHKRA:6]> <6>[ 47.056254] c0 Read: 01 10 00 80 03 01 04 00 00 53 00 04 00 12 01 00 <7>[ 47.070175] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 47.070339] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <7>[ 47.555328] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 47.555661] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 47.555976] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 47.569267] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 47.581331] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 47.582578] c0 read_hsic_cb: status:-2 actual:0 <7>[ 47.583612] c0 usb 1-2: usb auto-suspend <7>[ 47.595064] c0 hub 1-0:1.0: hub_suspend <7>[ 47.595131] c0 usb usb1: bus auto-suspend <7>[ 47.595194] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 47.595697] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 47.595766] c0 request_active_lock_release <6>[ 47.943894] c3 Write: 01 0c 00 00 03 01 00 14 00 43 00 00 00 <6>[ 47.944090] c3 request_active_lock_set <7>[ 47.944365] c3 usb usb1: usb auto-resume <7>[ 47.944492] c3 s5p-ehci s5p-ehci: resume root hub <7>[ 47.995071] c3 hub 1-0:1.0: hub_resume <7>[ 47.995141] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 47.995206] c3 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 47.995287] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 47.995351] c3 mif: usb_port_resume: 1283, 4 <7>[ 47.995391] c3 usb 1-2: finish resume <7>[ 47.995457] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 47.995513] c3 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 47.997768] c0 usb 1-2: read_hsic: <7>[ 47.998025] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 47.998073] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 47.998139] c0 [CHKRA:3]> <7>[ 47.998178] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 47.998225] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 47.998291] c0 [CHKRA:5]> <7>[ 47.998337] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 47.998383] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 47.998449] c0 [CHKRA:6]> <7>[ 47.998487] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 47.998533] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 47.998598] c0 [CHKRA:7]> <7>[ 47.998633] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 47.998679] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 47.998745] c0 [CHKRA:8]> <6>[ 47.998991] c0 Write: 01 b5 00 00 03 01 00 15 00 50 00 a9 00 10 0f 00 <6>[ 47.999116] c0 Write: 01 0c 00 00 03 01 00 16 00 4d 00 00 00 <6>[ 47.999242] c0 Write: 01 10 00 00 00 00 00 30 23 00 05 00 01 02 00 03 <6>[ 47.999366] c0 Write: 01 1b 00 00 0b 01 00 1c 00 24 00 0f 00 01 02 00 <6>[ 47.999488] c0 Write: 01 1b 00 00 0b 01 00 1d 00 24 00 0f 00 01 02 00 <6>[ 47.999609] c0 Write: 01 1b 00 00 0b 01 00 1e 00 24 00 0f 00 01 02 00 <6>[ 47.999746] c0 Write: 01 20 00 00 0b 01 00 1f 00 20 00 14 00 01 02 00 <6>[ 47.999879] c0 Write: 01 22 00 00 0b 01 00 20 00 21 00 16 00 01 02 00 <6>[ 48.001491] c0 Write: 01 22 00 00 0b 01 00 21 00 21 00 16 00 01 02 00 <6>[ 48.001650] c0 Write: 01 22 00 00 0b 01 00 22 00 20 00 16 00 01 02 00 <6>[ 48.001793] c0 Write: 01 22 00 00 0b 01 00 23 00 21 00 16 00 01 02 00 <6>[ 48.001945] c0 Write: 01 0c 00 00 03 01 00 17 00 4f 00 00 00 <6>[ 48.002076] c0 Write: 01 22 00 00 0b 01 00 24 00 20 00 16 00 01 02 00 <6>[ 48.002233] c0 Write: 01 22 00 00 0b 01 00 25 00 20 00 16 00 01 02 00 <6>[ 48.026764] c0 [NACB:6]< <6>[ 48.026821] c0 [NRA:6]> <7>[ 48.026901] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.029006] c0 [RACB:6]< <7>[ 48.029069] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.029125] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.029207] c0 [CHKRA:6]> <6>[ 48.029284] c0 Read: 01 61 00 80 03 01 02 14 00 43 00 55 00 02 04 00 <6>[ 48.034800] c0 [NACB:6]< <6>[ 48.034864] c0 [NRA:6]> <7>[ 48.034949] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.036146] c0 [RACB:6]< <7>[ 48.036217] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.036275] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.036359] c0 [CHKRA:6]> <6>[ 48.036631] c0 Read: 01 13 00 80 03 01 02 15 00 50 00 07 00 02 04 00 <6>[ 48.037241] c0 Write: 01 10 00 00 03 01 00 18 00 02 00 04 00 12 01 00 <6>[ 48.042786] c0 [NACB:6]< <6>[ 48.042845] c0 [NRA:6]> <7>[ 48.042929] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.044399] c0 [RACB:6]< <7>[ 48.044466] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.044522] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.044611] c0 [CHKRA:6]> <6>[ 48.044689] c0 Read: 01 6f 00 80 03 01 02 16 00 4d 00 63 00 02 04 00 <6>[ 48.050775] c0 [NACB:6]< <6>[ 48.050850] c0 [NRA:6]> <7>[ 48.050941] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.052272] c0 [RACB:6]< <7>[ 48.052349] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.052406] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.052493] c0 [CHKRA:6]> <6>[ 48.052572] c0 Read: 01 17 00 80 00 00 01 30 23 00 0c 00 02 04 00 00 <6>[ 48.058792] c0 [NACB:6]< <6>[ 48.058863] c0 [NRA:6]> <7>[ 48.058950] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.060143] c0 [RACB:6]< <7>[ 48.060217] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.060275] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.060359] c0 [CHKRA:6]> <6>[ 48.060436] c0 Read: 01 1c 00 80 03 01 02 17 00 4f 00 10 00 02 04 00 <6>[ 48.061059] c0 Write: 01 0c 00 00 03 01 00 19 00 52 00 00 00 <6>[ 48.065548] c0 Write: 01 0c 00 00 03 01 00 1a 00 43 00 00 00 <6>[ 48.066796] c0 [NACB:6]< <6>[ 48.066868] c0 [NRA:6]> <7>[ 48.066968] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.068390] c0 [RACB:6]< <7>[ 48.068472] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.068545] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.068634] c0 [CHKRA:6]> <6>[ 48.068712] c0 Read: 01 5a 00 80 0b 01 02 1c 00 24 00 4e 00 02 04 00 <6>[ 48.069594] c0 Write: 01 0c 00 00 03 01 00 1b 00 39 00 00 00 <6>[ 48.074790] c0 [NACB:6]< <6>[ 48.074862] c0 [NRA:6]> <7>[ 48.074949] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.076287] c0 [RACB:6]< <7>[ 48.076367] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <6>[ 48.076420] c3 Read: 01 13 00 80 03 01 02 18 00 02 00 07 00 02 04 00 <7>[ 48.076483] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.076574] c0 [CHKRA:6]> <6>[ 48.077048] c0 Write: 01 3c 00 00 03 01 00 1c 00 03 00 30 00 10 01 00 <6>[ 48.082804] c0 [NACB:6]< <6>[ 48.082872] c0 [NRA:6]> <7>[ 48.082959] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.084262] c0 [RACB:6]< <7>[ 48.084345] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.084407] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.084494] c0 [CHKRA:6]> <6>[ 48.084925] c0 Read: 01 17 00 80 03 01 02 19 00 52 00 0b 00 02 04 00 <6>[ 48.090769] c0 [NACB:6]< <6>[ 48.090833] c0 [NRA:6]> <7>[ 48.090919] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.092391] c0 [RACB:6]< <7>[ 48.092462] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.092519] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.092601] c0 [CHKRA:6]> <6>[ 48.092678] c0 Read: 01 61 00 80 03 01 02 1a 00 43 00 55 00 02 04 00 <6>[ 48.098508] c3 Write: 01 22 00 00 0b 01 00 26 00 21 00 16 00 01 02 00 <6>[ 48.098792] c0 [NACB:6]< <6>[ 48.098844] c0 [NRA:6]> <7>[ 48.098926] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.101515] c0 [RACB:6]< <7>[ 48.101587] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.101643] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.101725] c0 [CHKRA:6]> <6>[ 48.101794] c0 Read: 01 1f 00 80 03 01 02 1b 00 39 00 13 00 02 04 00 <6>[ 48.106792] c0 [NACB:6]< <6>[ 48.106864] c0 [NRA:6]> <7>[ 48.106950] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.108272] c0 [RACB:6]< <7>[ 48.108347] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.108404] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.108488] c0 [CHKRA:6]> <6>[ 48.108563] c0 Read: 01 18 00 80 0b 01 02 1d 00 24 00 0c 00 02 04 00 <6>[ 48.114802] c0 [NACB:6]< <6>[ 48.114878] c0 [NRA:6]> <7>[ 48.114964] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.116262] c0 [RACB:6]< <7>[ 48.116338] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.116397] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.116483] c0 [CHKRA:6]> <6>[ 48.116559] c0 Read: 01 13 00 80 03 01 02 1c 00 03 00 07 00 02 04 00 <6>[ 48.117211] c3 Write: 01 0c 00 00 03 01 00 1d 00 4d 00 00 00 <6>[ 48.122784] c0 [NACB:6]< <6>[ 48.122839] c0 [NRA:6]> <7>[ 48.122907] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.124381] c0 [RACB:6]< <7>[ 48.124440] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.124484] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.124548] c0 [CHKRA:6]> <6>[ 48.124609] c0 Read: 01 6f 00 80 03 01 02 1d 00 4d 00 63 00 02 04 00 <6>[ 48.125357] c3 Write: 01 0c 00 00 03 01 00 1e 00 4f 00 00 00 <6>[ 48.130780] c0 [NACB:6]< <6>[ 48.130822] c0 [NRA:6]> <7>[ 48.130888] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.132265] c0 [RACB:6]< <7>[ 48.132324] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.132370] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.132437] c0 [CHKRA:6]> <6>[ 48.132493] c0 Read: 01 18 00 80 0b 01 02 1e 00 24 00 0c 00 02 04 00 <6>[ 48.138801] c0 [NACB:6]< <6>[ 48.138864] c0 [NRA:6]> <7>[ 48.138936] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.140274] c0 [RACB:6]< <7>[ 48.140330] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.140373] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.140432] c0 [CHKRA:6]> <6>[ 48.140485] c0 Read: 01 1c 00 80 03 01 02 1e 00 4f 00 10 00 02 04 00 <6>[ 48.140947] c3 Write: 01 0c 00 00 03 01 00 1f 00 52 00 00 00 <6>[ 48.146788] c0 [NACB:6]< <6>[ 48.146846] c0 [NRA:6]> <7>[ 48.146918] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.148260] c0 [RACB:6]< <7>[ 48.148319] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.148366] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.148429] c0 [CHKRA:6]> <6>[ 48.148507] c0 Read: 01 17 00 80 03 01 02 1f 00 52 00 0b 00 02 04 00 <6>[ 48.151994] c3 Write: 01 13 00 00 0c 01 00 05 00 01 00 07 00 01 04 00 <6>[ 48.153709] c3 Write: 01 22 00 00 0b 01 00 27 00 20 00 16 00 01 02 00 <6>[ 48.154769] c0 [NACB:6]< <6>[ 48.154817] c0 [NRA:6]> <7>[ 48.154888] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.156634] c0 [RACB:6]< <7>[ 48.156691] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.156742] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.156807] c0 [CHKRA:6]> <6>[ 48.156876] c0 Read: 01 27 00 80 0b 01 02 1f 00 20 00 1b 00 02 04 00 <6>[ 48.162786] c0 [NACB:6]< <6>[ 48.162839] c0 [NRA:6]> <7>[ 48.162908] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.164383] c0 [RACB:6]< <7>[ 48.164449] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.164493] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.164556] c0 [CHKRA:6]> <6>[ 48.164620] c0 Read: 01 1a 00 80 0c 01 02 05 00 01 00 0e 00 02 04 00 <6>[ 48.165162] c3 Write: 01 b5 00 00 03 01 00 20 00 50 00 a9 00 10 0f 00 <6>[ 48.170775] c0 [NACB:6]< <6>[ 48.170816] c0 [NRA:6]> <7>[ 48.170885] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.172628] c0 [RACB:6]< <7>[ 48.172675] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.172720] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.172780] c0 [CHKRA:6]> <6>[ 48.172839] c0 Read: 01 13 00 80 03 01 02 20 00 50 00 07 00 02 04 00 <6>[ 48.173248] c3 Write: 01 10 00 00 03 01 00 21 00 02 00 04 00 12 01 00 <6>[ 48.178772] c0 [NACB:6]< <6>[ 48.178811] c0 [NRA:6]> <7>[ 48.178872] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.180274] c0 [RACB:6]< <7>[ 48.180335] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.180383] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.180447] c0 [CHKRA:6]> <6>[ 48.180510] c0 Read: 01 39 00 80 0b 01 02 20 00 21 00 2d 00 02 04 00 <6>[ 48.186792] c0 [NACB:6]< <6>[ 48.186841] c0 [NRA:6]> <7>[ 48.186911] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.188134] c0 [RACB:6]< <7>[ 48.188200] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.188252] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.188320] c0 [CHKRA:6]> <6>[ 48.188376] c0 Read: 01 13 00 80 03 01 02 21 00 02 00 07 00 02 04 00 <6>[ 48.188810] c3 Write: 01 3c 00 00 03 01 00 22 00 03 00 30 00 10 01 00 <6>[ 48.192372] c3 Write: 01 0c 00 00 03 01 00 23 00 43 00 00 00 <6>[ 48.194164] c3 Write: 01 0c 00 00 03 01 00 24 00 39 00 00 00 <6>[ 48.194757] c0 [NACB:6]< <6>[ 48.194788] c0 [NRA:6]> <7>[ 48.194834] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.197376] c0 [RACB:6]< <7>[ 48.197429] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.197462] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.197506] c0 [CHKRA:6]> <6>[ 48.197554] c0 Read: 01 13 00 80 03 01 02 22 00 03 00 07 00 02 04 00 <6>[ 48.202772] c0 [NACB:6]< <6>[ 48.202811] c0 [NRA:6]> <7>[ 48.202860] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.204133] c0 [RACB:6]< <7>[ 48.204182] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.204220] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.204271] c0 [CHKRA:6]> <6>[ 48.204319] c0 Read: 01 61 00 80 03 01 02 23 00 43 00 55 00 02 04 00 <6>[ 48.210758] c0 [NACB:6]< <6>[ 48.210806] c0 [NRA:6]> <7>[ 48.210868] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.212133] c0 [RACB:6]< <7>[ 48.212178] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.212210] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.212260] c0 [CHKRA:6]> <6>[ 48.212310] c0 Read: 01 21 00 80 0b 01 02 21 00 21 00 15 00 02 04 00 <6>[ 48.218769] c0 [NACB:6]< <6>[ 48.218802] c0 [NRA:6]> <7>[ 48.218847] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.220125] c0 [RACB:6]< <7>[ 48.220165] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.220200] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.220244] c0 [CHKRA:6]> <6>[ 48.220282] c0 Read: 01 21 00 80 0b 01 02 22 00 20 00 15 00 02 04 00 <6>[ 48.221482] c3 Write: 01 1b 00 00 0b 01 00 28 00 24 00 0f 00 01 02 00 <6>[ 48.226763] c0 [NACB:6]< <6>[ 48.226797] c0 [NRA:6]> <7>[ 48.226844] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.228870] c0 [RACB:6]< <7>[ 48.228902] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.228938] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.228983] c0 [CHKRA:6]> <6>[ 48.229026] c0 Read: 01 1f 00 80 03 01 02 24 00 39 00 13 00 02 04 00 <6>[ 48.234774] c0 [NACB:6]< <6>[ 48.234812] c0 [NRA:6]> <7>[ 48.234865] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.236135] c0 [RACB:6]< <7>[ 48.236189] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.236223] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.236278] c0 [CHKRA:6]> <6>[ 48.236329] c0 Read: 01 22 00 80 0b 01 02 23 00 21 00 16 00 02 04 00 <6>[ 48.242776] c0 [NACB:6]< <6>[ 48.242820] c0 [NRA:6]> <7>[ 48.242870] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.244130] c0 [RACB:6]< <7>[ 48.244179] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.244220] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.244270] c0 [CHKRA:6]> <6>[ 48.244317] c0 Read: 01 2e 00 80 0b 01 02 24 00 20 00 22 00 02 04 00 <6>[ 48.258757] c0 [NACB:6]< <6>[ 48.258796] c0 [NRA:6]> <7>[ 48.258844] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.260137] c0 [RACB:6]< <7>[ 48.260183] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.260221] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.260274] c0 [CHKRA:6]> <6>[ 48.260321] c0 Read: 01 3c 00 80 0b 01 02 25 00 20 00 30 00 02 04 00 <6>[ 48.282770] c0 [NACB:6]< <6>[ 48.282807] c0 [NRA:6]> <7>[ 48.282864] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.284139] c0 [RACB:6]< <7>[ 48.284192] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.284227] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.284280] c0 [CHKRA:6]> <6>[ 48.284332] c0 Read: 01 45 00 80 0b 01 02 26 00 21 00 39 00 02 04 00 <6>[ 48.290759] c0 [NACB:6]< <6>[ 48.290800] c0 [NRA:6]> <7>[ 48.290853] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.292125] c0 [RACB:6]< <7>[ 48.292169] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.292208] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.292256] c0 [CHKRA:6]> <6>[ 48.292301] c0 Read: 01 26 00 80 0b 01 02 27 00 20 00 1a 00 02 04 00 <6>[ 48.330770] c0 [NACB:6]< <6>[ 48.330808] c0 [NRA:6]> <7>[ 48.330860] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.332130] c0 [RACB:6]< <7>[ 48.332178] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 48.332211] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 48.332263] c0 [CHKRA:6]> <6>[ 48.332312] c0 Read: 01 18 00 80 0b 01 02 28 00 24 00 0c 00 02 04 00 <3>[ 48.820076] c0 [HOTPLUG IN] check_up 600000>=500000 && 377>200 <3>[ 48.820134] c0 CPU_UP 1 <4>[ 48.826979] c1 CPU1: Booted secondary processor <6>[ 48.827052] c1 notifier_call_chain : NOTIFY BAD tick_notify <6>[ 48.830040] c1 Switched to NOHz mode on CPU #1 <7>[ 48.830100] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 48.830232] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 48.830356] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 48.836673] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 48.843175] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 48.843653] c0 read_hsic_cb: status:-2 actual:0 <7>[ 48.844643] c0 usb 1-2: usb auto-suspend <7>[ 48.855092] c0 hub 1-0:1.0: hub_suspend <7>[ 48.855124] c0 usb usb1: bus auto-suspend <7>[ 48.855147] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 48.855779] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 48.855810] c0 request_active_lock_release <6>[ 50.775465] c0 cm36651_work_func_light, red = 3 green = 3 blue = 3 white = 6 <5>[ 52.296705] c0 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 52.340010] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 52.369284] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 52.369342] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 52.369492] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 52.369553] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 52.369607] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 52.370153] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 52.372610] c0 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 52.372871] c0 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 52.373124] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 52.373356] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 52.373610] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 52.373847] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 52.374068] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 52.374296] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 52.425083] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 52.425331] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 52.425563] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 52.427301] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 52.427544] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 52.427768] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 52.427994] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 52.435066] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 52.435291] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 52.495563] c0 wm8994-codec wm8994-codec: write 59 = d8dd <6>[ 52.495761] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 52.505316] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 52.505514] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 52.505731] c0 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 52.505926] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 52.506117] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 52.506317] c0 i2s_txctrl:Turn on <6>[ 54.046296] c3 [VIB] haptic_work: pwm_config duty=27787 <6>[ 54.070453] c3 [VIB] haptic_work: pwm_config duty=27787 <6>[ 54.884392] c0 [VIB] haptic_work: pwm_config duty=27787 <6>[ 54.906169] c0 [VIB] haptic_work: pwm_config duty=27787 <7>[ 55.511664] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 55.511908] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 55.512317] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 55.512422] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <5>[ 55.844797] c0 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 56.016260] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 56.512917] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 56.513653] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 56.513964] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 56.514259] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 56.514563] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 56.514932] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 56.515231] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 56.515511] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 56.515782] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 56.517976] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 56.518250] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 56.518519] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 56.518790] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 56.519056] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 56.519321] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 56.670100] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 56.670394] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 56.670676] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 56.670954] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 56.671242] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 56.671525] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 56.671846] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 56.672103] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 56.672371] c0 wm8994-codec wm8994-codec: write 3e = 37 <5>[ 56.963113] c0 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 57.042762] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 57.067692] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 57.067753] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 57.067941] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 57.067991] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 57.068039] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 57.068541] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 57.071051] c0 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 57.071284] c0 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 57.071545] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 57.071765] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 57.071995] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 57.072211] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 57.072442] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 57.072654] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 57.125114] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 57.125335] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 57.125541] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 57.127014] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 57.127218] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 57.127419] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 57.127630] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 57.135099] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 57.135317] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 57.195487] c0 wm8994-codec wm8994-codec: write 59 = d7df <6>[ 57.195680] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 57.205256] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 57.205442] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 57.205639] c0 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 57.205819] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 57.206005] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 57.206201] c0 i2s_txctrl:Turn on <6>[ 57.957422] c0 Write: 01 0c 00 00 03 01 00 25 00 39 00 00 00 <6>[ 57.957524] c0 request_active_lock_set <7>[ 57.957693] c0 usb usb1: usb auto-resume <7>[ 57.957751] c0 s5p-ehci s5p-ehci: resume root hub <7>[ 58.010119] c0 hub 1-0:1.0: hub_resume <7>[ 58.010240] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 58.010342] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 58.010468] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 58.010561] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 58.010639] c0 mif: usb_port_resume: 1283, 4 <7>[ 58.010688] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 58.010793] c0 usb 1-2: finish resume <6>[ 58.013237] c0 usb 1-2: read_hsic: <7>[ 58.013789] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 58.013877] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 58.013995] c0 [CHKRA:3]> <7>[ 58.014063] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 58.014145] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 58.014265] c0 [CHKRA:5]> <7>[ 58.014342] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 58.014427] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 58.014541] c0 [CHKRA:6]> <7>[ 58.014603] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 58.014681] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 58.014791] c0 [CHKRA:7]> <7>[ 58.014852] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 58.014930] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 58.015100] c0 [CHKRA:8]> <6>[ 58.024967] c0 [NACB:6]< <6>[ 58.025044] c0 [NRA:6]> <7>[ 58.025142] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 58.026479] c0 [RACB:6]< <7>[ 58.026583] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 58.026658] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 58.026764] c0 [CHKRA:6]> <6>[ 58.026857] c0 Read: 01 1f 00 80 03 01 02 25 00 39 00 13 00 02 04 00 <7>[ 58.035107] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 58.035175] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <7>[ 58.525204] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 58.525401] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 58.525582] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 58.532322] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 58.539944] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 58.540783] c0 read_hsic_cb: status:-2 actual:0 <7>[ 58.541918] c0 usb 1-2: usb auto-suspend <7>[ 58.555137] c0 hub 1-0:1.0: hub_suspend <7>[ 58.555216] c0 usb usb1: bus auto-suspend <7>[ 58.555266] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 58.556003] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 58.556070] c0 request_active_lock_release <5>[ 59.864714] c0 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 60.065063] c0 [TSP] change_dvfs_lock <7>[ 60.211313] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 60.211433] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 60.211701] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 60.211758] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <5>[ 60.371890] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 60.490288] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=300 <6>[ 61.213031] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 61.214354] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 61.214698] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 61.214973] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 61.215355] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 61.215632] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 61.215903] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 61.216221] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 61.216488] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 61.218477] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 61.218759] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 61.219020] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 61.219286] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 61.219542] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 61.219799] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 61.375250] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 61.375548] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 61.375837] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 61.376154] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 61.376446] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 61.376709] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 61.377013] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 61.377285] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 61.377545] c0 wm8994-codec wm8994-codec: write 3e = 37 <5>[ 61.504331] c0 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 61.705051] c0 [TSP] change_dvfs_lock <5>[ 62.207770] c0 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 63.606577] c0 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 63.805061] c0 [TSP] change_dvfs_lock <5>[ 66.001017] c0 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 67.688704] c0 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 67.890108] c0 [TSP] change_dvfs_lock <6>[ 67.975790] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 67.975878] c0 mdm_hsic_rpm_check <6>[ 67.975914] c0 request_active_lock_set <7>[ 67.976084] c0 usb usb1: usb auto-resume <7>[ 67.976120] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 68.015827] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 68.030141] c0 hub 1-0:1.0: hub_resume <7>[ 68.030208] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 68.030270] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 68.030343] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 68.030403] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 68.030446] c0 mif: usb_port_resume: 1283, 4 <7>[ 68.030475] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 68.030538] c0 usb 1-2: finish resume <6>[ 68.032810] c0 usb 1-2: read_hsic: <7>[ 68.033161] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 68.033204] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 68.033265] c0 [CHKRA:3]> <7>[ 68.033308] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 68.033350] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 68.033406] c0 [CHKRA:5]> <7>[ 68.033443] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.033480] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.033535] c0 [CHKRA:6]> <7>[ 68.033570] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 68.033609] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 68.033663] c0 [CHKRA:7]> <7>[ 68.033696] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 68.033734] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 68.033859] c0 [CHKRA:8]> <6>[ 68.037307] c0 [NACB:6]< <6>[ 68.037351] c0 [NRA:6]> <7>[ 68.037406] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.038796] c0 [RACB:6]< <7>[ 68.038840] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.038881] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.038938] c0 [CHKRA:6]> <6>[ 68.038994] c0 Read: 01 23 00 80 01 04 04 00 00 01 00 17 00 24 14 00 <6>[ 68.040599] c0 Write: 01 0c 00 00 03 01 00 26 00 4d 00 00 00 <6>[ 68.045322] c0 [NACB:6]< <6>[ 68.045376] c0 [NRA:6]> <7>[ 68.045449] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.046681] c0 [RACB:6]< <7>[ 68.046735] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.046780] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.046848] c0 [CHKRA:6]> <6>[ 68.046917] c0 Read: 01 6f 00 80 03 01 02 26 00 4d 00 63 00 02 04 00 <6>[ 68.049577] c1 Write: 01 0c 00 00 03 01 00 27 00 39 00 00 00 <6>[ 68.053315] c0 [NACB:6]< <6>[ 68.053375] c0 [NRA:6]> <7>[ 68.053446] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.054559] c0 [RACB:6]< <7>[ 68.054614] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.054655] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.054723] c0 [CHKRA:6]> <6>[ 68.054780] c0 Read: 01 1f 00 80 03 01 02 27 00 39 00 13 00 02 04 00 <7>[ 68.055056] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 68.055098] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <6>[ 68.061771] c1 Write: 01 0c 00 00 03 01 00 28 00 39 00 00 00 <6>[ 68.069326] c0 [NACB:6]< <6>[ 68.069379] c0 [NRA:6]> <7>[ 68.069439] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.070795] c0 [RACB:6]< <7>[ 68.070841] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.070882] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.070941] c0 [CHKRA:6]> <6>[ 68.070991] c0 Read: 01 1f 00 80 03 01 02 28 00 39 00 13 00 02 04 00 <6>[ 68.129544] c1 Write: 01 10 00 00 01 05 00 01 00 2a 00 04 00 10 01 00 <6>[ 68.141304] c0 [NACB:6]< <6>[ 68.141351] c0 [NRA:6]> <7>[ 68.141402] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.142676] c0 [RACB:6]< <7>[ 68.142719] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.142751] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.142796] c0 [CHKRA:6]> <6>[ 68.142840] c0 Read: 01 2b 00 80 01 05 02 01 00 2a 00 1f 00 02 04 00 <6>[ 68.143123] c1 Write: 01 11 00 00 01 05 00 02 00 2b 00 05 00 01 02 00 <6>[ 68.157292] c0 [NACB:6]< <6>[ 68.157332] c0 [NRA:6]> <7>[ 68.157378] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.158914] c0 [RACB:6]< <7>[ 68.158945] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.158976] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.159018] c0 [CHKRA:6]> <6>[ 68.159060] c0 Read: 01 93 00 80 01 05 02 02 00 2b 00 87 00 02 04 00 <6>[ 68.159373] c0 Write: 01 11 00 00 01 05 00 03 00 2b 00 05 00 01 02 00 <6>[ 68.173297] c0 [NACB:6]< <6>[ 68.173340] c0 [NRA:6]> <7>[ 68.173389] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.174792] c0 [RACB:6]< <7>[ 68.174824] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.174855] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.174897] c0 [CHKRA:6]> <6>[ 68.174940] c0 Read: 01 77 00 80 01 05 02 03 00 2b 00 6b 00 02 04 00 <6>[ 68.175475] c0 Write: 01 31 00 00 01 05 00 04 00 27 00 25 00 01 01 00 <6>[ 68.181306] c0 [NACB:6]< <6>[ 68.181348] c0 [NRA:6]> <7>[ 68.181399] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.182670] c0 [RACB:6]< <7>[ 68.182711] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.182748] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.182798] c0 [CHKRA:6]> <6>[ 68.182843] c0 Read: 01 18 00 80 01 05 02 04 00 27 00 0c 00 02 04 00 <6>[ 68.183193] c0 Write: 01 10 00 00 01 05 00 05 00 2a 00 04 00 10 01 00 <6>[ 68.197302] c0 [NACB:6]< <6>[ 68.197350] c0 [NRA:6]> <7>[ 68.197409] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.198671] c0 [RACB:6]< <7>[ 68.198715] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.198751] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.198801] c0 [CHKRA:6]> <6>[ 68.198846] c0 Read: 01 2f 00 80 01 05 02 05 00 2a 00 23 00 02 04 00 <6>[ 68.199151] c0 Write: 01 11 00 00 01 05 00 06 00 2b 00 05 00 01 02 00 <6>[ 68.213309] c0 [NACB:6]< <6>[ 68.213357] c0 [NRA:6]> <7>[ 68.213415] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.214794] c0 [RACB:6]< <7>[ 68.214838] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.214877] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.214929] c0 [CHKRA:6]> <6>[ 68.214978] c0 Read: 01 b2 00 80 01 05 02 06 00 2b 00 a6 00 02 04 00 <6>[ 68.215400] c0 Write: 01 11 00 00 01 05 00 07 00 2b 00 05 00 01 02 00 <6>[ 68.237311] c0 [NACB:6]< <6>[ 68.237362] c0 [NRA:6]> <7>[ 68.237424] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.239043] c0 [RACB:6]< <7>[ 68.239088] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.239130] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.239188] c0 [CHKRA:6]> <6>[ 68.239238] c0 Read: 01 b2 00 80 01 05 02 07 00 2b 00 a6 00 02 04 00 <6>[ 68.239726] c0 Write: 01 11 00 00 01 05 00 08 00 2b 00 05 00 01 02 00 <6>[ 68.245312] c0 [NACB:6]< <6>[ 68.245362] c0 [NRA:6]> <7>[ 68.245427] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.246675] c0 [RACB:6]< <7>[ 68.246734] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.246779] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.246842] c0 [CHKRA:6]> <6>[ 68.246900] c0 Read: 01 2c 00 80 03 01 04 00 00 4c 00 20 00 01 08 00 <6>[ 68.253330] c0 [NACB:6]< <6>[ 68.253385] c0 [NRA:6]> <7>[ 68.253454] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.254562] c0 [RACB:6]< <7>[ 68.254618] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.254661] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.254725] c0 [CHKRA:6]> <6>[ 68.254791] c0 Read: 01 b2 00 80 01 05 02 08 00 2b 00 a6 00 02 04 00 <6>[ 68.254878] c3 max77686_rtc_set_time: 113/1/24 17:27:16(0) <6>[ 68.255481] c0 Write: 01 11 00 00 01 05 00 09 00 2b 00 05 00 01 02 00 <6>[ 68.277310] c0 [NACB:6]< <6>[ 68.277370] c0 [NRA:6]> <7>[ 68.277439] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.278687] c0 [RACB:6]< <7>[ 68.278743] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.278790] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.278855] c0 [CHKRA:6]> <6>[ 68.278930] c0 Read: 01 b2 00 80 01 05 02 09 00 2b 00 a6 00 02 04 00 <6>[ 68.279463] c0 Write: 01 11 00 00 01 05 00 0a 00 2b 00 05 00 01 02 00 <6>[ 68.280067] c3 max77686_rtc_set_time: task=m.android.phone[2858] <6>[ 68.293330] c0 [NACB:6]< <6>[ 68.293396] c0 [NRA:6]> <7>[ 68.293462] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.294696] c0 [RACB:6]< <7>[ 68.294769] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.294816] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.294885] c0 [CHKRA:6]> <6>[ 68.294967] c0 Read: 01 b2 00 80 01 05 02 0a 00 2b 00 a6 00 02 04 00 <6>[ 68.295784] c0 Write: 01 11 00 00 01 05 00 0b 00 2b 00 05 00 01 02 00 <6>[ 68.317315] c0 [NACB:6]< <6>[ 68.317366] c0 [NRA:6]> <7>[ 68.317427] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.318676] c0 [RACB:6]< <7>[ 68.318733] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.318774] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.318833] c0 [CHKRA:6]> <6>[ 68.318892] c0 Read: 01 b2 00 80 01 05 02 0b 00 2b 00 a6 00 02 04 00 <6>[ 68.319393] c0 Write: 01 11 00 00 01 05 00 0c 00 2b 00 05 00 01 02 00 <6>[ 68.333312] c0 [NACB:6]< <6>[ 68.333374] c0 [NRA:6]> <7>[ 68.333443] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.334810] c0 [RACB:6]< <7>[ 68.334876] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.334919] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.334985] c0 [CHKRA:6]> <6>[ 68.335059] c3 Read: 01 b2 00 80 01 05 02 0c 00 2b 00 a6 00 02 04 00 <6>[ 68.335648] c0 Write: 01 11 00 00 01 05 00 0d 00 2b 00 05 00 01 02 00 <6>[ 68.349308] c0 [NACB:6]< <6>[ 68.349358] c0 [NRA:6]> <7>[ 68.349419] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.350812] c0 [RACB:6]< <7>[ 68.350870] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.350911] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.350970] c0 [CHKRA:6]> <6>[ 68.351025] c0 Read: 01 b2 00 80 01 05 02 0d 00 2b 00 a6 00 02 04 00 <6>[ 68.351575] c0 Write: 01 23 00 00 01 05 00 0e 00 27 00 17 00 01 01 00 <6>[ 68.355675] c0 logger_release: took 0 msec <5>[ 68.357923] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 68.365323] c0 [NACB:6]< <6>[ 68.365390] c0 [NRA:6]> <7>[ 68.365455] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.366554] c0 [RACB:6]< <7>[ 68.366608] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.366649] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.366708] c0 [CHKRA:6]> <6>[ 68.366768] c0 Read: 01 18 00 80 01 05 02 0e 00 27 00 0c 00 02 04 00 <6>[ 68.367849] c0 Write: 01 20 00 00 01 02 00 01 00 f2 ff 14 00 01 01 00 <6>[ 68.389314] c0 [NACB:6]< <6>[ 68.389355] c0 [NRA:6]> <7>[ 68.389405] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.390671] c0 [RACB:6]< <7>[ 68.390713] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.390748] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.390800] c0 [CHKRA:6]> <6>[ 68.390850] c0 Read: 01 28 00 80 01 02 02 01 00 f2 ff 1c 00 02 04 00 <6>[ 68.391266] c0 Write: 01 0c 00 00 01 02 00 02 00 22 00 00 00 <6>[ 68.397324] c0 [NACB:6]< <6>[ 68.397374] c0 [NRA:6]> <7>[ 68.397431] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.398684] c0 [RACB:6]< <7>[ 68.398730] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.398762] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.398807] c0 [CHKRA:6]> <6>[ 68.398853] c0 Read: 01 17 00 80 01 02 02 02 00 22 00 0b 00 02 04 00 <6>[ 68.399272] c0 Write: 01 10 00 00 01 02 00 03 00 4d 00 04 00 01 01 00 <6>[ 68.405303] c0 [NACB:6]< <6>[ 68.405344] c0 [NRA:6]> <7>[ 68.405393] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.406677] c0 [RACB:6]< <7>[ 68.406721] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.406756] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.406807] c0 [CHKRA:6]> <6>[ 68.406853] c0 Read: 01 13 00 80 01 02 02 03 00 4d 00 07 00 02 04 00 <6>[ 68.407451] c1 Write: 01 32 00 00 01 02 00 04 00 20 00 26 00 31 01 00 <6>[ 68.407865] c3 Write: 01 0c 00 00 03 01 00 29 00 43 00 00 00 <6>[ 68.413310] c0 [NACB:6]< <6>[ 68.413350] c0 [NRA:6]> <7>[ 68.413405] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.414793] c0 [RACB:6]< <7>[ 68.414831] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 68.414863] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 68.414906] c0 [CHKRA:6]> <6>[ 68.414945] c0 Read: 01 61 00 80 03 01 02 29 00 43 00 55 00 02 04 00 <5>[ 68.760986] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 68.863099] c1 melfas-ts 3-0048: finger [0] up, palm 0 <7>[ 68.910107] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 68.910240] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 68.910364] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 68.916846] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 68.923342] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 68.923831] c0 read_hsic_cb: status:-2 actual:0 <7>[ 68.924820] c0 usb 1-2: usb auto-suspend <7>[ 68.935101] c0 hub 1-0:1.0: hub_suspend <7>[ 68.935146] c0 usb usb1: bus auto-suspend <7>[ 68.935176] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 68.936445] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 68.936479] c0 request_active_lock_release <6>[ 68.937313] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 68.937372] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 68.937541] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 68.937600] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 68.937651] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 68.938198] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 68.940859] c0 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 68.941094] c0 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 68.941325] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 68.941535] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 68.941742] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 68.941952] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 68.942153] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 68.942357] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 68.995231] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 68.995544] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 68.995814] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 68.997693] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 68.997950] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 68.998214] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 68.998476] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 69.005117] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 69.005388] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 69.065589] c0 wm8994-codec wm8994-codec: write 59 = d7df <6>[ 69.065829] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 69.075262] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 69.075472] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 69.075703] c3 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 69.075908] c3 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 69.076128] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 69.076365] c0 i2s_txctrl:Turn on <5>[ 69.648135] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 69.808732] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 70.234088] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 70.370945] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 70.762575] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 70.830617] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 71.186412] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 71.385045] c1 [TSP] change_dvfs_lock <5>[ 71.971578] c1 melfas-ts 3-0048: finger [0] up, palm 0 <7>[ 72.081523] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 72.081638] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 72.081898] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 72.081948] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <5>[ 72.189550] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 72.314721] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 72.550511] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 72.750067] c1 [TSP] change_dvfs_lock <6>[ 73.081358] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 73.081577] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 73.081787] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 73.081996] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 73.082208] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 73.082418] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 73.082628] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 73.082840] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 73.083049] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 73.084657] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 73.084868] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 73.085077] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 73.085287] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 73.085495] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 73.085702] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 73.240060] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 73.240290] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 73.240499] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 73.240708] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 73.240923] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 73.241133] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 73.241369] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 73.241581] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 73.241790] c0 wm8994-codec wm8994-codec: write 3e = 37 <5>[ 73.255228] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 73.507429] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 73.705059] c1 [TSP] change_dvfs_lock <6>[ 73.907689] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 73.907744] c0 mdm_hsic_rpm_check <6>[ 73.907775] c0 request_active_lock_set <7>[ 73.907897] c0 usb usb1: usb auto-resume <7>[ 73.907926] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 73.945874] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 73.960053] c0 hub 1-0:1.0: hub_resume <7>[ 73.960111] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 73.960164] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 73.960229] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 73.960279] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 73.960318] c0 mif: usb_port_resume: 1283, 4 <7>[ 73.960344] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 73.960398] c0 usb 1-2: finish resume <6>[ 73.962621] c0 usb 1-2: read_hsic: <7>[ 73.963018] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 73.963070] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 73.963142] c0 [CHKRA:3]> <7>[ 73.963183] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 73.963235] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 73.963307] c0 [CHKRA:5]> <7>[ 73.963355] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 73.963412] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.963484] c0 [CHKRA:6]> <7>[ 73.963527] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 73.963575] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 73.963643] c0 [CHKRA:7]> <7>[ 73.963686] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 73.963734] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 73.963803] c0 [CHKRA:8]> <6>[ 73.969128] c0 [NACB:6]< <6>[ 73.969193] c0 [NRA:6]> <7>[ 73.969263] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.970477] c0 [RACB:6]< <7>[ 73.970524] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 73.970565] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.970625] c0 [CHKRA:6]> <6>[ 73.970686] c0 Read: 01 1a 00 80 01 02 02 04 00 20 00 0e 00 02 04 00 <6>[ 73.977116] c0 [NACB:6]< <6>[ 73.977160] c0 [NRA:6]> <7>[ 73.977215] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.978489] c0 [RACB:6]< <7>[ 73.978537] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 73.978585] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.978650] c0 [CHKRA:6]> <6>[ 73.978720] c0 Read: 01 15 00 80 01 04 04 00 00 01 00 09 00 22 02 00 <7>[ 73.985083] c3 hub 1-0:1.0: resume on port 2, status 0 <6>[ 73.985118] c1 [NACB:6]< <7>[ 73.985146] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <6>[ 73.985185] c1 [NRA:6]> <7>[ 73.985242] c1 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.986352] c0 [RACB:6]< <7>[ 73.986399] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 73.986440] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.986499] c0 [CHKRA:6]> <6>[ 73.986562] c0 Read: 01 15 00 80 01 ff 04 00 00 22 00 09 00 01 02 00 <6>[ 73.987298] c0 Write: 01 10 00 00 01 01 00 01 00 4d 00 04 00 01 01 00 <6>[ 73.993113] c0 [NACB:6]< <6>[ 73.993159] c0 [NRA:6]> <7>[ 73.993221] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.994348] c0 [RACB:6]< <7>[ 73.994392] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 73.994434] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 73.994492] c0 [CHKRA:6]> <6>[ 73.994552] c0 Read: 01 13 00 80 01 01 02 01 00 4d 00 07 00 02 04 00 <6>[ 73.994894] c0 Write: 01 13 00 00 01 01 00 02 00 2d 00 07 00 10 04 00 <6>[ 74.001119] c0 [NACB:6]< <6>[ 74.001172] c0 [NRA:6]> <7>[ 74.001229] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.002352] c0 [RACB:6]< <7>[ 74.002397] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.002437] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.002497] c0 [CHKRA:6]> <6>[ 74.002546] c0 Read: 01 3a 00 80 01 01 02 02 00 2d 00 2e 00 02 04 00 <6>[ 74.002897] c0 Write: 01 10 00 00 01 01 00 03 00 4d 00 04 00 01 01 00 <6>[ 74.009108] c0 [NACB:6]< <6>[ 74.009152] c0 [NRA:6]> <7>[ 74.009211] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.010353] c0 [RACB:6]< <7>[ 74.010396] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.010435] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.010492] c0 [CHKRA:6]> <6>[ 74.010538] c0 Read: 01 13 00 80 01 01 02 03 00 4d 00 07 00 02 04 00 <6>[ 74.140239] c0 Write: 01 13 00 00 01 02 00 05 00 2d 00 07 00 10 04 00 <6>[ 74.145116] c0 [NACB:6]< <6>[ 74.145167] c0 [NRA:6]> <7>[ 74.145225] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.146483] c0 [RACB:6]< <7>[ 74.146537] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.146582] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.146641] c0 [CHKRA:6]> <6>[ 74.146696] c0 Read: 01 2c 00 80 01 02 02 05 00 2d 00 20 00 02 04 00 <6>[ 74.147567] c3 Write: 01 13 00 00 01 02 00 06 00 2d 00 07 00 10 04 00 <6>[ 74.153119] c0 [NACB:6]< <6>[ 74.153171] c0 [NRA:6]> <7>[ 74.153232] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.154346] c0 [RACB:6]< <7>[ 74.154391] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.154429] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.154485] c0 [CHKRA:6]> <6>[ 74.154533] c0 Read: 01 2c 00 80 01 02 02 06 00 2d 00 20 00 02 04 00 <6>[ 74.155667] c0 Write: 01 0f 00 00 00 00 00 31 22 00 04 00 01 01 00 01 <6>[ 74.161110] c0 [NACB:6]< <6>[ 74.161152] c0 [NRA:6]> <7>[ 74.161208] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.162358] c0 [RACB:6]< <7>[ 74.162416] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.162466] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.162524] c0 [CHKRA:6]> <6>[ 74.162578] c0 Read: 01 17 00 80 00 00 01 31 22 00 0c 00 02 04 00 00 <6>[ 74.163264] c0 Write: 01 0c 00 00 01 06 00 01 00 44 00 00 00 <6>[ 74.169119] c0 [NACB:6]< <6>[ 74.169168] c0 [NRA:6]> <7>[ 74.169227] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.170352] c0 [RACB:6]< <7>[ 74.170399] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.170437] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.170494] c0 [CHKRA:6]> <6>[ 74.170569] c0 Read: 01 1f 00 80 01 06 02 01 00 44 00 13 00 02 04 00 <6>[ 74.171393] c0 Write: 01 10 00 00 01 06 00 02 00 01 00 04 00 13 01 00 <6>[ 74.177125] c0 [NACB:6]< <6>[ 74.177184] c0 [NRA:6]> <7>[ 74.177254] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.178381] c0 [RACB:6]< <7>[ 74.178435] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.178475] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.178539] c0 [CHKRA:6]> <6>[ 74.178619] c0 Read: 01 13 00 80 01 06 02 02 00 01 00 07 00 02 04 00 <6>[ 74.193573] c3 Write: 01 0c 00 00 03 01 00 2a 00 43 00 00 00 <6>[ 74.196533] c3 Write: 01 13 00 00 01 02 00 07 00 21 00 07 00 01 04 00 <6>[ 74.196728] c3 Write: 01 11 00 00 01 05 00 0f 00 29 00 05 00 01 02 00 <5>[ 74.200516] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 74.201134] c0 [NACB:6]< <6>[ 74.201211] c0 [NRA:6]> <7>[ 74.201295] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.202743] c0 [RACB:6]< <7>[ 74.202811] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.202864] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.202938] c0 [CHKRA:6]> <6>[ 74.203014] c0 Read: 01 61 00 80 03 01 02 2a 00 43 00 55 00 02 04 00 <6>[ 74.209135] c0 [NACB:6]< <6>[ 74.209192] c0 [NRA:6]> <7>[ 74.209264] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.210352] c0 [RACB:6]< <7>[ 74.210404] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.210454] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.210523] c0 [CHKRA:6]> <6>[ 74.210590] c0 Read: 01 13 00 80 01 05 02 0f 00 29 00 07 00 02 04 00 <6>[ 74.211013] c0 Write: 01 11 00 00 01 05 00 10 00 29 00 05 00 01 02 00 <6>[ 74.217131] c0 [NACB:6]< <6>[ 74.217203] c0 [NRA:6]> <7>[ 74.217282] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.218483] c0 [RACB:6]< <7>[ 74.218539] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.218594] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.218673] c0 [CHKRA:6]> <6>[ 74.218766] c0 Read: 01 13 00 80 01 05 02 10 00 29 00 07 00 02 04 00 <6>[ 74.705135] c0 [NACB:6]< <6>[ 74.705221] c0 [NRA:6]> <7>[ 74.705314] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.706412] c0 [RACB:6]< <7>[ 74.706496] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.706566] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.706669] c0 [CHKRA:6]> <6>[ 74.706762] c0 Read: 01 13 00 80 01 02 02 07 00 21 00 07 00 02 04 00 <6>[ 74.707992] c3 Write: 01 0c 00 00 01 02 00 08 00 22 00 00 00 <6>[ 74.713141] c0 [NACB:6]< <6>[ 74.713221] c0 [NRA:6]> <7>[ 74.713314] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.714374] c0 [RACB:6]< <7>[ 74.714454] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.714521] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.714626] c0 [CHKRA:6]> <6>[ 74.714714] c0 Read: 01 15 00 80 01 04 04 00 00 01 00 09 00 22 02 00 <6>[ 74.721121] c0 [NACB:6]< <6>[ 74.721196] c0 [NRA:6]> <7>[ 74.721287] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.722362] c0 [RACB:6]< <7>[ 74.722434] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.722498] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.722595] c0 [CHKRA:6]> <6>[ 74.722688] c0 Read: 01 21 00 80 01 ff 04 00 00 22 00 15 00 01 02 00 <6>[ 74.729157] c0 [NACB:6]< <6>[ 74.729245] c0 [NRA:6]> <7>[ 74.729358] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.730640] c0 [RACB:6]< <7>[ 74.730757] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.730835] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.730937] c0 [CHKRA:6]> <6>[ 74.731040] c0 Read: 01 17 00 80 01 02 02 08 00 22 00 0b 00 02 04 00 <6>[ 74.821712] c3 Write: 01 10 00 00 00 00 00 32 23 00 05 00 01 02 00 01 <6>[ 74.833097] c0 [NACB:6]< <6>[ 74.833136] c0 [NRA:6]> <7>[ 74.833185] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.834471] c0 [RACB:6]< <7>[ 74.834506] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.834540] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.834590] c0 [CHKRA:6]> <6>[ 74.834627] c0 Read: 01 17 00 80 00 00 01 32 23 00 0c 00 02 04 00 00 <6>[ 74.844594] c1 Write: 01 0c 00 00 03 01 00 2b 00 43 00 00 00 <6>[ 74.849109] c0 [NACB:6]< <6>[ 74.849151] c0 [NRA:6]> <7>[ 74.849202] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.850473] c0 [RACB:6]< <7>[ 74.850516] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 74.850551] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 74.850601] c0 [CHKRA:6]> <6>[ 74.850645] c0 Read: 01 61 00 80 03 01 02 2b 00 43 00 55 00 02 04 00 <7>[ 75.350473] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 75.350785] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 75.351067] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 75.363944] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 75.376807] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 75.378019] c0 read_hsic_cb: status:-2 actual:0 <7>[ 75.379294] c0 usb 1-2: usb auto-suspend <7>[ 75.390071] c0 hub 1-0:1.0: hub_suspend <7>[ 75.390128] c0 usb usb1: bus auto-suspend <7>[ 75.390180] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 75.391131] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 75.391185] c0 request_active_lock_release <5>[ 75.841909] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 76.040051] c1 [TSP] change_dvfs_lock <5>[ 76.302943] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 76.694582] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 76.895059] c1 [TSP] change_dvfs_lock <6>[ 77.384772] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 77.384821] c0 mdm_hsic_rpm_check <6>[ 77.384853] c0 request_active_lock_set <7>[ 77.384979] c0 usb usb1: usb auto-resume <7>[ 77.385008] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 77.426286] c0 mdm_hsic_irq_handler: detect Falling edge <6>[ 77.430509] c0 [VIB] haptic_work: pwm_config duty=27787 <7>[ 77.440059] c0 hub 1-0:1.0: hub_resume <7>[ 77.440121] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 77.440174] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 77.440245] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 77.440279] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 77.440331] c0 mif: usb_port_resume: 1283, 4 <7>[ 77.440358] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 77.440414] c0 usb 1-2: finish resume <6>[ 77.442700] c0 usb 1-2: read_hsic: <7>[ 77.443012] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 77.443051] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 77.443107] c0 [CHKRA:3]> <7>[ 77.443141] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 77.443179] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 77.443235] c0 [CHKRA:5]> <7>[ 77.443266] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 77.443303] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 77.443357] c0 [CHKRA:6]> <7>[ 77.443395] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 77.443432] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 77.443486] c0 [CHKRA:7]> <7>[ 77.443516] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 77.443554] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 77.443609] c0 [CHKRA:8]> <6>[ 77.450070] c1 [NACB:5]< <6>[ 77.450115] c1 [NRA:5]> <7>[ 77.450173] c1 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 77.451562] c0 [RACB:5]< <7>[ 77.451597] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 77.451636] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 77.451692] c0 [CHKRA:5]> <6>[ 77.453227] c0 [VIB] haptic_work: pwm_config duty=27787 <7>[ 77.465060] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 77.465098] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <5>[ 77.814911] c1 melfas-ts 3-0048: finger [0] up, palm 0 <7>[ 77.945177] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 77.945364] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 77.945515] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 77.952020] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 77.958652] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 77.959505] c0 read_hsic_cb: status:-2 actual:0 <7>[ 77.960628] c0 usb 1-2: usb auto-suspend <7>[ 77.975079] c0 hub 1-0:1.0: hub_suspend <7>[ 77.975117] c0 usb usb1: bus auto-suspend <7>[ 77.975141] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 77.976216] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 77.976246] c0 request_active_lock_release <5>[ 78.483999] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 78.680054] c1 [TSP] change_dvfs_lock <5>[ 80.241863] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 80.691281] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 80.890060] c1 [TSP] change_dvfs_lock <5>[ 81.349440] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 81.705553] c1 melfas-ts 3-0048: finger [0] down, palm 0 <6>[ 81.774002] c0 cm36651_work_func_light, red = 3 green = 3 blue = 3 white = 6 <5>[ 81.854240] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 87.430099] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 87.578280] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 87.647601] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 87.647653] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 87.647793] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 87.647841] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 87.647884] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 87.648373] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 87.650708] c0 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 87.650928] c0 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 87.651149] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 87.651355] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 87.651567] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 87.651787] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 87.652005] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 87.652220] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 87.705170] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 87.705457] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 87.705702] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 87.707347] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 87.707608] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 87.707849] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 87.708096] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 87.715184] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 87.715461] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 87.775824] c0 wm8994-codec wm8994-codec: write 59 = d7de <6>[ 87.776143] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 87.785427] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 87.785730] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 87.786089] c0 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 87.786428] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 87.786773] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 87.787152] c0 i2s_txctrl:Turn on <6>[ 88.834860] c0 [VIB] haptic_work: pwm_config duty=27787 <6>[ 88.857002] c3 [VIB] haptic_work: pwm_config duty=27787 <5>[ 89.659656] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 89.854625] c1 melfas-ts 3-0048: finger [0] up, palm 0 <7>[ 90.792437] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 90.792586] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 90.792873] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 90.792937] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <5>[ 90.824324] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 91.020051] c1 [TSP] change_dvfs_lock <5>[ 91.343671] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 91.792538] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 91.792809] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 91.793058] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 91.793309] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 91.793565] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 91.793832] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 91.794146] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 91.794429] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 91.794692] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 91.796707] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 91.796978] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 91.797242] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 91.797506] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 91.797770] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 91.798035] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 91.950131] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 91.950419] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 91.950694] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 91.950969] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 91.951249] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 91.951525] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 91.951842] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 91.952118] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 91.952380] c0 wm8994-codec wm8994-codec: write 3e = 37 <5>[ 92.162661] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 92.360051] c1 [TSP] change_dvfs_lock <5>[ 92.669885] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 93.119378] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 93.151906] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 93.222361] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 93.222409] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 93.222546] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 93.222596] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 93.222640] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 93.223131] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 93.225454] c0 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 93.225677] c0 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 93.225910] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 93.226155] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 93.226374] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 93.226595] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 93.226827] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 93.227057] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 93.280098] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 93.280369] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 93.280620] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 93.282392] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 93.282648] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 93.282897] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 93.283151] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 93.290110] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 93.290408] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 93.350713] c0 wm8994-codec wm8994-codec: write 59 = d7dd <6>[ 93.351002] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 93.360446] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 93.360744] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 93.361096] c0 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 93.361400] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 93.361711] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 93.362047] c0 i2s_txctrl:Turn on <5>[ 94.075901] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 94.275071] c1 [TSP] change_dvfs_lock <5>[ 94.293481] c1 melfas-ts 3-0048: finger [0] up, palm 0 <7>[ 96.367658] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 96.368015] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 96.368582] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 96.368744] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 97.370635] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 97.371189] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 97.371825] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 97.372454] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 97.372989] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 97.375372] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 97.376199] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 97.376794] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 97.377256] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 97.380300] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 97.380769] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 97.381252] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 97.381731] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 97.382204] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 97.382641] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 97.535352] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 97.535815] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 97.536296] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 97.536758] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 97.537241] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 97.537703] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 97.538231] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 97.538657] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 97.539118] c0 wm8994-codec wm8994-codec: write 3e = 37 <5>[ 100.032858] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 100.235060] c1 [TSP] change_dvfs_lock <5>[ 100.527243] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 101.636662] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 101.835081] c1 [TSP] change_dvfs_lock <5>[ 102.189899] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 103.052239] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 103.142568] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 103.212633] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 103.212679] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 103.212815] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 103.212863] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 103.212906] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 103.213396] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 103.215805] c1 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 103.216031] c1 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 103.216266] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 103.216471] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 103.216675] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 103.216879] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 103.217098] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 103.217310] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 103.270054] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 103.270312] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 103.270614] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 103.272384] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 103.272640] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 103.272889] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 103.273145] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 103.280133] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 103.280442] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 103.340773] c0 wm8994-codec wm8994-codec: write 59 = d5dd <6>[ 103.341112] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 103.350433] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 103.350750] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 103.351126] c1 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 103.351425] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 103.351752] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 103.352123] c0 i2s_txctrl:Turn on <6>[ 104.275799] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 104.275977] c0 mdm_hsic_rpm_check <6>[ 104.276088] c0 request_active_lock_set <7>[ 104.276314] c0 usb usb1: usb auto-resume <7>[ 104.276414] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 104.315963] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 104.330190] c0 hub 1-0:1.0: hub_resume <7>[ 104.330423] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 104.330644] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 104.330912] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 104.331057] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 104.331261] c0 mif: usb_port_resume: 1283, 4 <7>[ 104.331374] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 104.331601] c0 usb 1-2: finish resume <6>[ 104.334891] c0 usb 1-2: read_hsic: <7>[ 104.336068] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 104.336256] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 104.337528] c0 usb_wwan_indat_callback: read urb received : 48 <6>[ 104.338949] c0 [CHKRA:3]> <7>[ 104.339192] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <6>[ 104.339383] c1 mdm_modem_ioctl: mdm autopm request[lock] <6>[ 104.339540] c1 get lock <7>[ 104.339630] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 104.339877] c0 [CHKRA:5]> <7>[ 104.340044] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 104.340234] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 104.340545] c0 [CHKRA:6]> <7>[ 104.340782] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 104.340953] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 104.341200] c0 [CHKRA:7]> <7>[ 104.341408] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 104.341587] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 104.341823] c0 [CHKRA:8]> <7>[ 104.355146] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 104.355327] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <6>[ 104.460722] c1 usb_wwan_write: write (48 chars) <6>[ 104.463108] c0 usb_wwan_indat_callback: read urb received : 16 <6>[ 104.464374] c1 usb_wwan_write: write (16 chars) <6>[ 104.466592] c0 usb_wwan_indat_callback: read urb received : 52 <6>[ 104.468300] c1 usb_wwan_write: write (16 chars) <6>[ 104.479363] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.481905] c1 usb_wwan_write: write (16 chars) <6>[ 104.490337] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.492841] c1 usb_wwan_write: write (16 chars) <6>[ 104.501426] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.503767] c1 usb_wwan_write: write (16 chars) <6>[ 104.512405] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.514171] c1 usb_wwan_write: write (16 chars) <6>[ 104.523154] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.524890] c1 usb_wwan_write: write (16 chars) <6>[ 104.534181] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.536103] c1 usb_wwan_write: write (16 chars) <6>[ 104.545047] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.560934] c1 usb_wwan_write: write (16 chars) <6>[ 104.564532] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.566381] c1 usb_wwan_write: write (16 chars) <6>[ 104.575825] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.578028] c1 usb_wwan_write: write (16 chars) <6>[ 104.586545] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.587636] c1 usb_wwan_write: write (16 chars) <6>[ 104.597664] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.599107] c1 usb_wwan_write: write (16 chars) <6>[ 104.608785] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.609876] c1 usb_wwan_write: write (16 chars) <6>[ 104.619709] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.620862] c1 usb_wwan_write: write (16 chars) <6>[ 104.631109] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.645321] c1 usb_wwan_write: write (16 chars) <6>[ 104.649171] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.651080] c1 usb_wwan_write: write (16 chars) <6>[ 104.660281] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.662112] c1 usb_wwan_write: write (16 chars) <6>[ 104.671318] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.673144] c1 usb_wwan_write: write (16 chars) <6>[ 104.682185] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.684562] c1 usb_wwan_write: write (16 chars) <6>[ 104.693050] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.695474] c1 usb_wwan_write: write (16 chars) <6>[ 104.703905] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.705787] c1 usb_wwan_write: write (16 chars) <6>[ 104.715418] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.731297] c1 usb_wwan_write: write (16 chars) <6>[ 104.734683] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.735805] c1 usb_wwan_write: write (16 chars) <6>[ 104.745795] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.747373] c1 usb_wwan_write: write (16 chars) <6>[ 104.757046] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.758137] c1 usb_wwan_write: write (16 chars) <6>[ 104.768186] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.769296] c1 usb_wwan_write: write (16 chars) <6>[ 104.779445] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.780683] c1 usb_wwan_write: write (16 chars) <6>[ 104.790459] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.791630] c1 usb_wwan_write: write (16 chars) <6>[ 104.801424] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.816324] c1 usb_wwan_write: write (16 chars) <6>[ 104.819794] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.820977] c1 usb_wwan_write: write (16 chars) <6>[ 104.831051] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.832185] c1 usb_wwan_write: write (16 chars) <6>[ 104.842065] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.843121] c1 usb_wwan_write: write (16 chars) <6>[ 104.853295] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.854388] c1 usb_wwan_write: write (16 chars) <6>[ 104.864041] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.865151] c1 usb_wwan_write: write (16 chars) <6>[ 104.875062] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.876424] c1 usb_wwan_write: write (16 chars) <6>[ 104.886289] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.903473] c1 usb_wwan_write: write (16 chars) <6>[ 104.907172] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.909022] c1 usb_wwan_write: write (16 chars) <6>[ 104.918297] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.920172] c1 usb_wwan_write: write (16 chars) <6>[ 104.929289] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.931230] c1 usb_wwan_write: write (16 chars) <6>[ 104.940183] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.942100] c1 usb_wwan_write: write (16 chars) <6>[ 104.951310] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.953249] c1 usb_wwan_write: write (16 chars) <6>[ 104.962547] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.964370] c1 usb_wwan_write: write (16 chars) <6>[ 104.973537] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.991272] c1 usb_wwan_write: write (16 chars) <6>[ 104.994928] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 104.996875] c1 usb_wwan_write: write (16 chars) <6>[ 105.005746] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 105.007685] c1 usb_wwan_write: write (16 chars) <6>[ 105.016667] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 105.018761] c1 usb_wwan_write: write (16 chars) <6>[ 105.027316] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 105.028419] c1 usb_wwan_write: write (16 chars) <6>[ 105.039065] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 105.040238] c1 usb_wwan_write: write (16 chars) <6>[ 105.050190] c0 usb_wwan_indat_callback: read urb received : 16384 <6>[ 105.563727] c1 usb_wwan_write: write (8 chars) <6>[ 105.566046] c0 usb_wwan_indat_callback: read urb received : 8 <6>[ 105.567425] c1 mdm_modem_ioctl: mdm autopm request[release] <6>[ 105.567572] c1 release lock <7>[ 106.065510] c1 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 106.065925] c1 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 106.066292] c1 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 106.079905] c1 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 106.093549] c1 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 106.094974] c0 read_hsic_cb: status:-2 actual:0 <7>[ 106.096471] c1 usb 1-2: usb auto-suspend <7>[ 106.110220] c1 hub 1-0:1.0: hub_suspend <7>[ 106.110367] c1 usb usb1: bus auto-suspend <7>[ 106.110481] c1 s5p-ehci s5p-ehci: suspend root hub <6>[ 106.111739] c1 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 106.111866] c1 request_active_lock_release <7>[ 106.357643] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 106.358063] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 106.358611] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 106.358768] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 106.393029] c1 [VIB] haptic_work: pwm_config duty=27787 <6>[ 106.416525] c1 [VIB] haptic_work: pwm_config duty=27787 <6>[ 107.360346] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 107.360853] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 107.361308] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 107.361765] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 107.362230] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 107.362689] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 107.363143] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 107.363603] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 107.364076] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 107.367245] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 107.367705] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 107.368150] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 107.368605] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 107.369062] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 107.369512] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 107.520095] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 107.520603] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 107.521121] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 107.521507] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 107.521883] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 107.522248] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 107.522685] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 107.523065] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 107.523422] c0 wm8994-codec wm8994-codec: write 3e = 37 <5>[ 108.661591] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 108.860050] c1 [TSP] change_dvfs_lock <5>[ 109.446127] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 110.324050] c1 melfas-ts 3-0048: finger [0] down, palm 0 <7>[ 110.525070] c1 [TSP] change_dvfs_lock <5>[ 110.738381] c1 melfas-ts 3-0048: finger [0] up, palm 0 <5>[ 110.979386] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 111.023326] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 111.108953] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 111.109012] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 111.109181] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 111.109244] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 111.109296] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 111.109823] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 111.112287] c0 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 111.112569] c0 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 111.112834] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 111.113058] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 111.113286] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 111.113522] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 111.113739] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 111.113945] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 111.165116] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 111.165382] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 111.165628] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 111.167413] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 111.167658] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 111.167899] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 111.168141] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 111.175262] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 111.175587] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 111.235732] c0 wm8994-codec wm8994-codec: write 59 = d7dd <6>[ 111.236052] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 111.245408] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 111.245733] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 111.246110] c3 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 111.246416] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 111.246750] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 111.247090] c0 i2s_txctrl:Turn on <5>[ 112.699330] c1 melfas-ts 3-0048: finger [0] down, palm 0 <5>[ 112.754921] c1 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 112.773689] c0 cm36651_work_func_light, red = 3 green = 3 blue = 3 white = 6 <7>[ 115.880551] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 115.880712] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 115.880995] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 115.881057] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 116.882646] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 116.882917] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 116.883164] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 116.883410] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 116.883660] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 116.883908] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 116.884156] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 116.884408] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 116.884654] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 116.887124] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 116.887389] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 116.887638] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 116.887943] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 116.888219] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 116.888473] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 117.040149] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 117.040443] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 117.040719] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 117.041006] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 117.041277] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 117.041556] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 117.041888] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 117.042142] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 117.042408] c0 wm8994-codec wm8994-codec: write 3e = 37 <6>[ 132.828889] c1 Write: 01 29 04 00 10 02 00 09 00 35 00 1d 04 01 04 00 <6>[ 132.828977] c1 request_active_lock_set <7>[ 132.829195] c1 usb usb1: usb auto-resume <7>[ 132.829245] c1 s5p-ehci s5p-ehci: resume root hub <7>[ 132.880087] c1 hub 1-0:1.0: hub_resume <7>[ 132.880188] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 132.880275] c1 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 132.880387] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 132.880470] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 132.880535] c1 mif: usb_port_resume: 1283, 4 <7>[ 132.880579] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 132.880671] c1 usb 1-2: finish resume <6>[ 132.883973] c0 usb 1-2: read_hsic: <7>[ 132.884464] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 132.884528] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 132.884621] c0 [CHKRA:3]> <7>[ 132.884676] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 132.884736] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 132.884827] c0 [CHKRA:5]> <7>[ 132.884878] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.884938] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.885753] c1 [CHKRA:6]> <7>[ 132.885898] c1 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 132.885974] c1 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 132.886087] c1 [CHKRA:7]> <7>[ 132.886192] c1 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 132.886257] c1 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 132.886349] c1 [CHKRA:8]> <7>[ 132.905114] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 132.905174] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <6>[ 132.909485] c0 [NACB:6]< <6>[ 132.909572] c0 [NRA:6]> <7>[ 132.909676] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.910958] c0 [RACB:6]< <7>[ 132.911039] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.911106] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.911204] c0 [CHKRA:6]> <6>[ 132.911304] c0 Read: 01 13 00 80 10 02 02 09 00 35 00 07 00 02 04 00 <6>[ 132.917475] c0 [NACB:6]< <6>[ 132.917545] c0 [NRA:6]> <7>[ 132.917630] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.918949] c0 [RACB:6]< <7>[ 132.919017] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.919080] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.919176] c0 [CHKRA:6]> <6>[ 132.919250] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 132.921158] c1 Write: 01 29 04 00 10 02 00 0a 00 35 00 1d 04 01 04 00 <6>[ 132.933465] c0 [NACB:6]< <6>[ 132.933543] c0 [NRA:6]> <7>[ 132.933631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.934950] c0 [RACB:6]< <7>[ 132.935022] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.935085] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.935180] c0 [CHKRA:6]> <6>[ 132.935326] c0 Read: 01 13 00 80 10 02 02 0a 00 35 00 07 00 02 04 00 <6>[ 132.941472] c0 [NACB:6]< <6>[ 132.941557] c0 [NRA:6]> <7>[ 132.941660] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.942965] c0 [RACB:6]< <7>[ 132.943041] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.943107] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.943208] c0 [CHKRA:6]> <6>[ 132.943326] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 132.945350] c1 Write: 01 29 04 00 10 02 00 0b 00 35 00 1d 04 01 04 00 <6>[ 132.957479] c0 [NACB:6]< <6>[ 132.957573] c0 [NRA:6]> <7>[ 132.957667] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.958969] c0 [RACB:6]< <7>[ 132.959054] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.959122] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.959230] c0 [CHKRA:6]> <6>[ 132.959329] c0 Read: 01 13 00 80 10 02 02 0b 00 35 00 07 00 02 04 00 <6>[ 132.965450] c0 [NACB:6]< <6>[ 132.965525] c0 [NRA:6]> <7>[ 132.965616] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.966829] c0 [RACB:6]< <7>[ 132.966901] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.966966] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.967061] c0 [CHKRA:6]> <6>[ 132.967141] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 132.969038] c1 Write: 01 29 04 00 10 02 00 0c 00 35 00 1d 04 01 04 00 <6>[ 132.981459] c0 [NACB:6]< <6>[ 132.981535] c0 [NRA:6]> <7>[ 132.981625] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.982960] c0 [RACB:6]< <7>[ 132.983033] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.983098] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.983194] c0 [CHKRA:6]> <6>[ 132.983275] c0 Read: 01 13 00 80 10 02 02 0c 00 35 00 07 00 02 04 00 <6>[ 132.989477] c0 [NACB:6]< <6>[ 132.989560] c0 [NRA:6]> <7>[ 132.989650] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.990846] c0 [RACB:6]< <7>[ 132.990931] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 132.991000] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 132.991102] c0 [CHKRA:6]> <6>[ 132.991193] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 132.993398] c1 Write: 01 29 04 00 10 02 00 0d 00 35 00 1d 04 01 04 00 <6>[ 133.005450] c0 [NACB:6]< <6>[ 133.005524] c0 [NRA:6]> <7>[ 133.005612] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.006864] c0 [RACB:6]< <7>[ 133.006976] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.007051] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.007158] c0 [CHKRA:6]> <6>[ 133.007259] c0 Read: 01 13 00 80 10 02 02 0d 00 35 00 07 00 02 04 00 <6>[ 133.013483] c0 [NACB:6]< <6>[ 133.013557] c0 [NRA:6]> <7>[ 133.013649] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.014825] c0 [RACB:6]< <7>[ 133.014896] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.014960] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.015057] c0 [CHKRA:6]> <6>[ 133.015195] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.017576] c1 Write: 01 29 04 00 10 02 00 0e 00 35 00 1d 04 01 04 00 <6>[ 133.029471] c0 [NACB:6]< <6>[ 133.029548] c0 [NRA:6]> <7>[ 133.029636] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.030957] c0 [RACB:6]< <7>[ 133.031037] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.031102] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.031200] c0 [CHKRA:6]> <6>[ 133.031296] c0 Read: 01 13 00 80 10 02 02 0e 00 35 00 07 00 02 04 00 <6>[ 133.037472] c0 [NACB:6]< <6>[ 133.037542] c0 [NRA:6]> <7>[ 133.037625] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.038950] c0 [RACB:6]< <7>[ 133.039015] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.039078] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.039172] c0 [CHKRA:6]> <6>[ 133.039243] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.041313] c3 Write: 01 29 04 00 10 02 00 0f 00 35 00 1d 04 01 04 00 <6>[ 133.053461] c0 [NACB:6]< <6>[ 133.053535] c0 [NRA:6]> <7>[ 133.053625] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.054950] c0 [RACB:6]< <7>[ 133.055022] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.055085] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.055180] c0 [CHKRA:6]> <6>[ 133.055328] c0 Read: 01 13 00 80 10 02 02 0f 00 35 00 07 00 02 04 00 <6>[ 133.061459] c0 [NACB:6]< <6>[ 133.061536] c0 [NRA:6]> <7>[ 133.061631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.062835] c0 [RACB:6]< <7>[ 133.062907] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.062971] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.063064] c0 [CHKRA:6]> <6>[ 133.063248] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.065784] c3 Write: 01 29 04 00 10 02 00 10 00 35 00 1d 04 01 04 00 <6>[ 133.077467] c0 [NACB:6]< <6>[ 133.077544] c0 [NRA:6]> <7>[ 133.077638] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.078826] c0 [RACB:6]< <7>[ 133.078901] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.078967] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.079066] c0 [CHKRA:6]> <6>[ 133.079166] c0 Read: 01 13 00 80 10 02 02 10 00 35 00 07 00 02 04 00 <6>[ 133.085449] c0 [NACB:6]< <6>[ 133.085521] c0 [NRA:6]> <7>[ 133.085608] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.086951] c0 [RACB:6]< <7>[ 133.087018] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.087082] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.087177] c0 [CHKRA:6]> <6>[ 133.087267] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.089078] c3 Write: 01 29 04 00 10 02 00 11 00 35 00 1d 04 01 04 00 <6>[ 133.101456] c0 [NACB:6]< <6>[ 133.101531] c0 [NRA:6]> <7>[ 133.101621] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.102951] c0 [RACB:6]< <7>[ 133.103022] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.103087] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.103181] c0 [CHKRA:6]> <6>[ 133.103279] c0 Read: 01 13 00 80 10 02 02 11 00 35 00 07 00 02 04 00 <6>[ 133.109489] c0 [NACB:6]< <6>[ 133.109569] c0 [NRA:6]> <7>[ 133.109667] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.110957] c0 [RACB:6]< <7>[ 133.111034] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.111102] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.111199] c0 [CHKRA:6]> <6>[ 133.111291] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.113186] c3 Write: 01 29 04 00 10 02 00 12 00 35 00 1d 04 01 04 00 <6>[ 133.125458] c0 [NACB:6]< <6>[ 133.125553] c0 [NRA:6]> <7>[ 133.125656] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.126960] c0 [RACB:6]< <7>[ 133.127040] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.127107] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.127205] c0 [CHKRA:6]> <6>[ 133.127289] c0 Read: 01 13 00 80 10 02 02 12 00 35 00 07 00 02 04 00 <6>[ 133.133477] c0 [NACB:6]< <6>[ 133.133547] c0 [NRA:6]> <7>[ 133.133633] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.134951] c0 [RACB:6]< <7>[ 133.135019] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.135081] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.135176] c0 [CHKRA:6]> <6>[ 133.135315] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.137666] c3 Write: 01 29 04 00 10 02 00 13 00 35 00 1d 04 01 04 00 <6>[ 133.149467] c0 [NACB:6]< <6>[ 133.149544] c0 [NRA:6]> <7>[ 133.149635] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.151334] c0 [RACB:6]< <7>[ 133.151413] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.151477] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.151573] c0 [CHKRA:6]> <6>[ 133.151672] c0 Read: 01 13 00 80 10 02 02 13 00 35 00 07 00 02 04 00 <6>[ 133.157482] c0 [NACB:6]< <6>[ 133.157562] c0 [NRA:6]> <7>[ 133.157650] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.158841] c0 [RACB:6]< <7>[ 133.158927] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.158995] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.159099] c0 [CHKRA:6]> <6>[ 133.159194] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.161354] c3 Write: 01 29 04 00 10 02 00 14 00 35 00 1d 04 01 04 00 <6>[ 133.173469] c0 [NACB:6]< <6>[ 133.173560] c0 [NRA:6]> <7>[ 133.173666] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.174847] c0 [RACB:6]< <7>[ 133.174944] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.175012] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.175119] c0 [CHKRA:6]> <6>[ 133.175270] c0 Read: 01 13 00 80 10 02 02 14 00 35 00 07 00 02 04 00 <6>[ 133.181487] c0 [NACB:6]< <6>[ 133.181560] c0 [NRA:6]> <7>[ 133.181651] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.182961] c0 [RACB:6]< <7>[ 133.183037] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.183100] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.183196] c0 [CHKRA:6]> <6>[ 133.183274] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.185353] c3 Write: 01 29 04 00 10 02 00 15 00 35 00 1d 04 01 04 00 <6>[ 133.197465] c0 [NACB:6]< <6>[ 133.197544] c0 [NRA:6]> <7>[ 133.197635] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.198824] c0 [RACB:6]< <7>[ 133.198898] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.198962] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.199059] c0 [CHKRA:6]> <6>[ 133.199173] c0 Read: 01 13 00 80 10 02 02 15 00 35 00 07 00 02 04 00 <6>[ 133.205447] c0 [NACB:6]< <6>[ 133.205518] c0 [NRA:6]> <7>[ 133.205602] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.206859] c0 [RACB:6]< <7>[ 133.206949] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.207019] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.207131] c0 [CHKRA:6]> <6>[ 133.207220] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.209636] c3 Write: 01 29 04 00 10 02 00 16 00 35 00 1d 04 01 04 00 <6>[ 133.221455] c0 [NACB:6]< <6>[ 133.221530] c0 [NRA:6]> <7>[ 133.221620] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.222859] c0 [RACB:6]< <7>[ 133.222933] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.223001] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.223108] c0 [CHKRA:6]> <6>[ 133.223206] c0 Read: 01 13 00 80 10 02 02 16 00 35 00 07 00 02 04 00 <6>[ 133.229489] c0 [NACB:6]< <6>[ 133.229563] c0 [NRA:6]> <7>[ 133.229649] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.230958] c0 [RACB:6]< <7>[ 133.231037] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.231102] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.231200] c0 [CHKRA:6]> <6>[ 133.231293] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.233211] c3 Write: 01 29 04 00 10 02 00 17 00 35 00 1d 04 01 04 00 <6>[ 133.245455] c0 [NACB:6]< <6>[ 133.245534] c0 [NRA:6]> <7>[ 133.245630] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.246960] c0 [RACB:6]< <7>[ 133.247043] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.247108] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.247208] c0 [CHKRA:6]> <6>[ 133.247293] c0 Read: 01 13 00 80 10 02 02 17 00 35 00 07 00 02 04 00 <6>[ 133.253476] c0 [NACB:6]< <6>[ 133.253547] c0 [NRA:6]> <7>[ 133.253631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.254950] c0 [RACB:6]< <7>[ 133.255017] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.255080] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.255175] c0 [CHKRA:6]> <6>[ 133.255323] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.257396] c0 Write: 01 29 04 00 10 02 00 18 00 35 00 1d 04 01 04 00 <6>[ 133.269466] c0 [NACB:6]< <6>[ 133.269542] c0 [NRA:6]> <7>[ 133.269631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.270830] c0 [RACB:6]< <7>[ 133.270903] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.270968] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.271063] c0 [CHKRA:6]> <6>[ 133.271142] c0 Read: 01 13 00 80 10 02 02 18 00 35 00 07 00 02 04 00 <6>[ 133.277498] c0 [NACB:6]< <6>[ 133.277583] c0 [NRA:6]> <7>[ 133.277674] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.278951] c0 [RACB:6]< <7>[ 133.279023] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.279089] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.279189] c0 [CHKRA:6]> <6>[ 133.279270] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.281787] c0 Write: 01 29 04 00 10 02 00 19 00 35 00 1d 04 01 04 00 <6>[ 133.293471] c0 [NACB:6]< <6>[ 133.293548] c0 [NRA:6]> <7>[ 133.293641] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.294825] c0 [RACB:6]< <7>[ 133.294898] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.294964] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.295072] c0 [CHKRA:6]> <6>[ 133.295223] c0 Read: 01 13 00 80 10 02 02 19 00 35 00 07 00 02 04 00 <6>[ 133.301483] c0 [NACB:6]< <6>[ 133.301553] c0 [NRA:6]> <7>[ 133.301639] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.302824] c0 [RACB:6]< <7>[ 133.302892] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.302955] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.303050] c0 [CHKRA:6]> <6>[ 133.303142] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.305099] c0 Write: 01 29 04 00 10 02 00 1a 00 35 00 1d 04 01 04 00 <6>[ 133.317464] c0 [NACB:6]< <6>[ 133.317541] c0 [NRA:6]> <7>[ 133.317631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.318826] c0 [RACB:6]< <7>[ 133.318897] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.318960] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.319055] c0 [CHKRA:6]> <6>[ 133.319152] c0 Read: 01 13 00 80 10 02 02 1a 00 35 00 07 00 02 04 00 <6>[ 133.325455] c0 [NACB:6]< <6>[ 133.325541] c0 [NRA:6]> <7>[ 133.325642] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.326834] c0 [RACB:6]< <7>[ 133.326914] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.326981] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.327078] c0 [CHKRA:6]> <6>[ 133.327161] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.329045] c0 Write: 01 29 04 00 10 02 00 1b 00 35 00 1d 04 01 04 00 <6>[ 133.333466] c0 [NACB:6]< <6>[ 133.333536] c0 [NRA:6]> <7>[ 133.333625] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.334701] c0 [RACB:6]< <7>[ 133.334770] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.334833] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.334928] c0 [CHKRA:6]> <6>[ 133.335072] c0 Read: 01 13 00 80 10 02 02 1b 00 35 00 07 00 02 04 00 <6>[ 133.341473] c0 [NACB:6]< <6>[ 133.341562] c0 [NRA:6]> <7>[ 133.341658] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.342962] c0 [RACB:6]< <7>[ 133.343048] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.343119] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.343220] c0 [CHKRA:6]> <6>[ 133.343330] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.345514] c0 Write: 01 29 04 00 10 02 00 1c 00 35 00 1d 04 01 04 00 <6>[ 133.357474] c0 [NACB:6]< <6>[ 133.357560] c0 [NRA:6]> <7>[ 133.357662] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.358970] c0 [RACB:6]< <7>[ 133.359055] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.359123] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.359225] c0 [CHKRA:6]> <6>[ 133.359322] c0 Read: 01 13 00 80 10 02 02 1c 00 35 00 07 00 02 04 00 <6>[ 133.365449] c0 [NACB:6]< <6>[ 133.365524] c0 [NRA:6]> <7>[ 133.365611] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.366955] c0 [RACB:6]< <7>[ 133.367029] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.367092] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.367188] c0 [CHKRA:6]> <6>[ 133.367265] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.369164] c0 Write: 01 29 04 00 10 02 00 1d 00 35 00 1d 04 01 04 00 <6>[ 133.373467] c0 [NACB:6]< <6>[ 133.373550] c0 [NRA:6]> <7>[ 133.373655] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.374976] c0 [RACB:6]< <7>[ 133.375065] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.375138] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.375244] c0 [CHKRA:6]> <6>[ 133.375373] c0 Read: 01 13 00 80 10 02 02 1d 00 35 00 07 00 02 04 00 <6>[ 133.381481] c0 [NACB:6]< <6>[ 133.381554] c0 [NRA:6]> <7>[ 133.381640] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.382978] c0 [RACB:6]< <7>[ 133.383055] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.383122] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.383217] c0 [CHKRA:6]> <6>[ 133.383296] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.385227] c0 Write: 01 29 04 00 10 02 00 1e 00 35 00 1d 04 01 04 00 <6>[ 133.389474] c0 [NACB:6]< <6>[ 133.389542] c0 [NRA:6]> <7>[ 133.389628] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.390988] c0 [RACB:6]< <7>[ 133.391088] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.391162] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.391267] c0 [CHKRA:6]> <6>[ 133.391360] c0 Read: 01 13 00 80 10 02 02 1e 00 35 00 07 00 02 04 00 <6>[ 133.397492] c0 [NACB:6]< <6>[ 133.397569] c0 [NRA:6]> <7>[ 133.397666] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.398952] c0 [RACB:6]< <7>[ 133.399023] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.399088] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.399184] c0 [CHKRA:6]> <6>[ 133.399279] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.401743] c0 Write: 01 29 04 00 10 02 00 1f 00 35 00 1d 04 01 04 00 <6>[ 133.413476] c0 [NACB:6]< <6>[ 133.413560] c0 [NRA:6]> <7>[ 133.413665] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.414951] c0 [RACB:6]< <7>[ 133.415027] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.415094] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.415192] c0 [CHKRA:6]> <6>[ 133.415315] c0 Read: 01 13 00 80 10 02 02 1f 00 35 00 07 00 02 04 00 <6>[ 133.421481] c0 [NACB:6]< <6>[ 133.421549] c0 [NRA:6]> <7>[ 133.421629] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.422964] c0 [RACB:6]< <7>[ 133.423035] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.423105] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.423226] c0 [CHKRA:6]> <6>[ 133.423320] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.425524] c0 Write: 01 29 04 00 10 02 00 20 00 35 00 1d 04 01 04 00 <6>[ 133.429458] c0 [NACB:6]< <6>[ 133.429528] c0 [NRA:6]> <7>[ 133.429619] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.430956] c0 [RACB:6]< <7>[ 133.431030] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.431095] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.431190] c0 [CHKRA:6]> <6>[ 133.431317] c0 Read: 01 13 00 80 10 02 02 20 00 35 00 07 00 02 04 00 <6>[ 133.437473] c0 [NACB:6]< <6>[ 133.437543] c0 [NRA:6]> <7>[ 133.437628] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.438825] c0 [RACB:6]< <7>[ 133.438893] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.438956] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.439051] c0 [CHKRA:6]> <6>[ 133.439126] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.441246] c0 Write: 01 29 04 00 10 02 00 21 00 35 00 1d 04 01 04 00 <6>[ 133.445478] c0 [NACB:6]< <6>[ 133.445550] c0 [NRA:6]> <7>[ 133.445641] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.446954] c0 [RACB:6]< <7>[ 133.447031] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.447095] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.447191] c0 [CHKRA:6]> <6>[ 133.447344] c0 Read: 01 13 00 80 10 02 02 21 00 35 00 07 00 02 04 00 <6>[ 133.453476] c0 [NACB:6]< <6>[ 133.453546] c0 [NRA:6]> <7>[ 133.453630] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.454949] c0 [RACB:6]< <7>[ 133.455016] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.455078] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.455172] c0 [CHKRA:6]> <6>[ 133.455291] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.457240] c0 Write: 01 29 04 00 10 02 00 22 00 35 00 1d 04 01 04 00 <6>[ 133.461470] c0 [NACB:6]< <6>[ 133.461544] c0 [NRA:6]> <7>[ 133.461635] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.462950] c0 [RACB:6]< <7>[ 133.463024] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.463091] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.463189] c0 [CHKRA:6]> <6>[ 133.463270] c0 Read: 01 13 00 80 10 02 02 22 00 35 00 07 00 02 04 00 <6>[ 133.469476] c0 [NACB:6]< <6>[ 133.469546] c0 [NRA:6]> <7>[ 133.469630] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.470955] c0 [RACB:6]< <7>[ 133.471025] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.471088] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.471185] c0 [CHKRA:6]> <6>[ 133.471266] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.473135] c0 Write: 01 29 04 00 10 02 00 23 00 35 00 1d 04 01 04 00 <6>[ 133.477486] c0 [NACB:6]< <6>[ 133.477578] c0 [NRA:6]> <7>[ 133.477678] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.478955] c0 [RACB:6]< <7>[ 133.479035] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.479101] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.479200] c0 [CHKRA:6]> <6>[ 133.479281] c0 Read: 01 13 00 80 10 02 02 23 00 35 00 07 00 02 04 00 <6>[ 133.485449] c0 [NACB:6]< <6>[ 133.485521] c0 [NRA:6]> <7>[ 133.485607] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.486949] c0 [RACB:6]< <7>[ 133.487016] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.487080] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.487176] c0 [CHKRA:6]> <6>[ 133.487267] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.489106] c0 Write: 01 29 04 00 10 02 00 24 00 35 00 1d 04 01 04 00 <6>[ 133.493475] c0 [NACB:6]< <6>[ 133.493554] c0 [NRA:6]> <7>[ 133.493646] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.494950] c0 [RACB:6]< <7>[ 133.495024] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.495089] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.495186] c0 [CHKRA:6]> <6>[ 133.495349] c0 Read: 01 13 00 80 10 02 02 24 00 35 00 07 00 02 04 00 <6>[ 133.501451] c0 [NACB:6]< <6>[ 133.501525] c0 [NRA:6]> <7>[ 133.501611] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.503575] c0 [RACB:6]< <7>[ 133.503643] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.503706] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.503801] c0 [CHKRA:6]> <6>[ 133.503896] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.505866] c0 Write: 01 29 04 00 10 02 00 25 00 35 00 1d 04 01 04 00 <6>[ 133.517464] c0 [NACB:6]< <6>[ 133.517539] c0 [NRA:6]> <7>[ 133.517628] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.518701] c0 [RACB:6]< <7>[ 133.518773] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.518837] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.518932] c0 [CHKRA:6]> <6>[ 133.519030] c0 Read: 01 13 00 80 10 02 02 25 00 35 00 07 00 02 04 00 <6>[ 133.525455] c0 [NACB:6]< <6>[ 133.525539] c0 [NRA:6]> <7>[ 133.525642] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.526715] c0 [RACB:6]< <7>[ 133.526802] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.526875] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.526977] c0 [CHKRA:6]> <6>[ 133.527062] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.528964] c0 Write: 01 29 04 00 10 02 00 26 00 35 00 1d 04 01 04 00 <6>[ 133.533460] c0 [NACB:6]< <6>[ 133.533529] c0 [NRA:6]> <7>[ 133.533615] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.534700] c0 [RACB:6]< <7>[ 133.534769] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.534832] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.534927] c0 [CHKRA:6]> <6>[ 133.535072] c0 Read: 01 13 00 80 10 02 02 26 00 35 00 07 00 02 04 00 <6>[ 133.541459] c0 [NACB:6]< <6>[ 133.541537] c0 [NRA:6]> <7>[ 133.541631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.542839] c0 [RACB:6]< <7>[ 133.542927] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.543001] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.543106] c0 [CHKRA:6]> <6>[ 133.543203] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.545437] c0 Write: 01 29 04 00 10 02 00 27 00 35 00 1d 04 01 04 00 <6>[ 133.549461] c0 [NACB:6]< <6>[ 133.549531] c0 [NRA:6]> <7>[ 133.549621] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.550957] c0 [RACB:6]< <7>[ 133.551030] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.551094] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.551190] c0 [CHKRA:6]> <6>[ 133.551283] c0 Read: 01 13 00 80 10 02 02 27 00 35 00 07 00 02 04 00 <6>[ 133.557487] c0 [NACB:6]< <6>[ 133.557576] c0 [NRA:6]> <7>[ 133.557666] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.558839] c0 [RACB:6]< <7>[ 133.558931] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.559003] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.559112] c0 [CHKRA:6]> <6>[ 133.559203] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.561786] c0 Write: 01 29 04 00 10 02 00 28 00 35 00 1d 04 01 04 00 <6>[ 133.573468] c0 [NACB:6]< <6>[ 133.573553] c0 [NRA:6]> <7>[ 133.573649] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.574717] c0 [RACB:6]< <7>[ 133.574799] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.574865] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.574965] c0 [CHKRA:6]> <6>[ 133.575117] c0 Read: 01 13 00 80 10 02 02 28 00 35 00 07 00 02 04 00 <6>[ 133.581463] c0 [NACB:6]< <6>[ 133.581539] c0 [NRA:6]> <7>[ 133.581628] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.582699] c0 [RACB:6]< <7>[ 133.582770] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.582836] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.582932] c0 [CHKRA:6]> <6>[ 133.583028] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.585313] c0 Write: 01 29 04 00 10 02 00 29 00 35 00 1d 04 01 04 00 <6>[ 133.589454] c0 [NACB:6]< <6>[ 133.589520] c0 [NRA:6]> <7>[ 133.589604] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.590842] c0 [RACB:6]< <7>[ 133.590936] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.591007] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.591110] c0 [CHKRA:6]> <6>[ 133.591200] c0 Read: 01 13 00 80 10 02 02 29 00 35 00 07 00 02 04 00 <6>[ 133.597480] c0 [NACB:6]< <6>[ 133.597555] c0 [NRA:6]> <7>[ 133.597646] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.598957] c0 [RACB:6]< <7>[ 133.599034] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.599100] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.599197] c0 [CHKRA:6]> <6>[ 133.599277] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.601336] c0 Write: 01 29 04 00 10 02 00 2a 00 35 00 1d 04 01 04 00 <6>[ 133.613481] c0 [NACB:6]< <6>[ 133.613560] c0 [NRA:6]> <7>[ 133.613652] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.614825] c0 [RACB:6]< <7>[ 133.614898] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.614963] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.615059] c0 [CHKRA:6]> <6>[ 133.615200] c0 Read: 01 13 00 80 10 02 02 2a 00 35 00 07 00 02 04 00 <6>[ 133.621452] c0 [NACB:6]< <6>[ 133.621524] c0 [NRA:6]> <7>[ 133.621607] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.622849] c0 [RACB:6]< <7>[ 133.622914] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.622977] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.623074] c0 [CHKRA:6]> <6>[ 133.623198] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.625179] c1 Write: 01 29 04 00 10 02 00 2b 00 35 00 1d 04 01 04 00 <6>[ 133.637458] c0 [NACB:6]< <6>[ 133.637533] c0 [NRA:6]> <7>[ 133.637622] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.638951] c0 [RACB:6]< <7>[ 133.639024] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.639087] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.639183] c0 [CHKRA:6]> <6>[ 133.639279] c0 Read: 01 13 00 80 10 02 02 2b 00 35 00 07 00 02 04 00 <6>[ 133.645452] c0 [NACB:6]< <6>[ 133.645531] c0 [NRA:6]> <7>[ 133.645625] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.646843] c0 [RACB:6]< <7>[ 133.646933] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.646995] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.647092] c0 [CHKRA:6]> <6>[ 133.647154] c1 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.649057] c1 Write: 01 29 04 00 10 02 00 2c 00 35 00 1d 04 01 04 00 <6>[ 133.661457] c0 [NACB:6]< <6>[ 133.661534] c0 [NRA:6]> <7>[ 133.661631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.662829] c0 [RACB:6]< <7>[ 133.662899] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <6>[ 133.662954] c1 Read: 01 13 00 80 10 02 02 2c 00 35 00 07 00 02 04 00 <7>[ 133.663024] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.663127] c0 [CHKRA:6]> <6>[ 133.669477] c0 [NACB:6]< <6>[ 133.669547] c0 [NRA:6]> <7>[ 133.669631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.670955] c0 [RACB:6]< <7>[ 133.671028] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.671092] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.671187] c0 [CHKRA:6]> <6>[ 133.671269] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.673101] c1 Write: 01 29 04 00 10 02 00 2d 00 35 00 1d 04 01 04 00 <6>[ 133.685453] c0 [NACB:6]< <6>[ 133.685528] c0 [NRA:6]> <7>[ 133.685619] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.686951] c0 [RACB:6]< <7>[ 133.687023] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.687086] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.687181] c0 [CHKRA:6]> <6>[ 133.687278] c0 Read: 01 13 00 80 10 02 02 2d 00 35 00 07 00 02 04 00 <6>[ 133.693487] c0 [NACB:6]< <6>[ 133.693576] c0 [NRA:6]> <7>[ 133.693676] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.694949] c0 [RACB:6]< <7>[ 133.695026] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.695093] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.695191] c0 [CHKRA:6]> <6>[ 133.695330] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.697389] c1 Write: 01 29 04 00 10 02 00 2e 00 35 00 1d 04 01 04 00 <6>[ 133.709486] c0 [NACB:6]< <6>[ 133.709576] c0 [NRA:6]> <7>[ 133.709677] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.711082] c0 [RACB:6]< <7>[ 133.711158] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.711226] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.711325] c0 [CHKRA:6]> <6>[ 133.711420] c0 Read: 01 13 00 80 10 02 02 2e 00 35 00 07 00 02 04 00 <6>[ 133.717474] c0 [NACB:6]< <6>[ 133.717542] c0 [NRA:6]> <7>[ 133.717629] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.718949] c0 [RACB:6]< <7>[ 133.719017] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.719080] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.719175] c0 [CHKRA:6]> <6>[ 133.719250] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.721173] c1 Write: 01 29 04 00 10 02 00 2f 00 35 00 1d 04 01 04 00 <6>[ 133.733466] c0 [NACB:6]< <6>[ 133.733542] c0 [NRA:6]> <7>[ 133.733633] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.734949] c0 [RACB:6]< <7>[ 133.735020] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.735085] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.735180] c0 [CHKRA:6]> <6>[ 133.735314] c0 Read: 01 13 00 80 10 02 02 2f 00 35 00 07 00 02 04 00 <6>[ 133.741468] c0 [NACB:6]< <6>[ 133.741558] c0 [NRA:6]> <7>[ 133.741655] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.742985] c0 [RACB:6]< <7>[ 133.743080] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.743149] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.743252] c0 [CHKRA:6]> <6>[ 133.743364] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.745508] c1 Write: 01 29 04 00 10 02 00 30 00 35 00 1d 04 01 04 00 <6>[ 133.757471] c0 [NACB:6]< <6>[ 133.757555] c0 [NRA:6]> <7>[ 133.757663] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.758975] c0 [RACB:6]< <7>[ 133.759060] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.759128] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.759231] c0 [CHKRA:6]> <6>[ 133.759328] c0 Read: 01 13 00 80 10 02 02 30 00 35 00 07 00 02 04 00 <6>[ 133.765451] c0 [NACB:6]< <6>[ 133.765525] c0 [NRA:6]> <7>[ 133.765613] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.766954] c0 [RACB:6]< <7>[ 133.767027] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.767091] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.767186] c0 [CHKRA:6]> <6>[ 133.767263] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.769085] c1 Write: 01 29 04 00 10 02 00 31 00 35 00 1d 04 01 04 00 <6>[ 133.781463] c0 [NACB:6]< <6>[ 133.781539] c0 [NRA:6]> <7>[ 133.781630] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.782957] c0 [RACB:6]< <7>[ 133.783037] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.783103] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.783200] c0 [CHKRA:6]> <6>[ 133.783284] c0 Read: 01 13 00 80 10 02 02 31 00 35 00 07 00 02 04 00 <6>[ 133.789476] c0 [NACB:6]< <6>[ 133.789545] c0 [NRA:6]> <7>[ 133.789631] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.790975] c0 [RACB:6]< <7>[ 133.791067] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.791133] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.791231] c0 [CHKRA:6]> <6>[ 133.791317] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.793306] c3 Write: 01 29 04 00 10 02 00 32 00 35 00 1d 04 01 04 00 <6>[ 133.805449] c0 [NACB:6]< <6>[ 133.805522] c0 [NRA:6]> <7>[ 133.805610] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.806971] c0 [RACB:6]< <7>[ 133.807059] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.807125] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.807228] c0 [CHKRA:6]> <6>[ 133.807318] c0 Read: 01 13 00 80 10 02 02 32 00 35 00 07 00 02 04 00 <6>[ 133.813493] c0 [NACB:6]< <6>[ 133.813570] c0 [NRA:6]> <7>[ 133.813664] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.814958] c0 [RACB:6]< <7>[ 133.815036] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.815102] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.815202] c0 [CHKRA:6]> <6>[ 133.815345] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.817890] c3 Write: 01 29 04 00 10 02 00 33 00 35 00 1d 04 01 04 00 <6>[ 133.829472] c0 [NACB:6]< <6>[ 133.829551] c0 [NRA:6]> <7>[ 133.829640] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.830837] c0 [RACB:6]< <7>[ 133.830918] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.830984] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.831080] c0 [CHKRA:6]> <6>[ 133.831178] c0 Read: 01 13 00 80 10 02 02 33 00 35 00 07 00 02 04 00 <6>[ 133.837474] c0 [NACB:6]< <6>[ 133.837542] c0 [NRA:6]> <7>[ 133.837627] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.838825] c0 [RACB:6]< <7>[ 133.838893] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.838956] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.839050] c0 [CHKRA:6]> <6>[ 133.839122] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.843106] c3 Write: 01 29 04 00 10 02 00 34 00 35 00 1d 04 01 04 00 <6>[ 133.853462] c0 [NACB:6]< <6>[ 133.853532] c0 [NRA:6]> <7>[ 133.853621] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.855582] c0 [RACB:6]< <7>[ 133.855659] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.855723] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.855819] c0 [CHKRA:6]> <6>[ 133.855914] c0 Read: 01 13 00 80 10 02 02 34 00 35 00 07 00 02 04 00 <6>[ 133.861485] c0 [NACB:6]< <6>[ 133.861559] c0 [NRA:6]> <7>[ 133.861654] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.862959] c0 [RACB:6]< <7>[ 133.863029] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.863092] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.863185] c0 [CHKRA:6]> <6>[ 133.863393] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.865389] c3 Write: 01 29 04 00 10 02 00 35 00 35 00 1d 04 01 04 00 <6>[ 133.877469] c0 [NACB:6]< <6>[ 133.877549] c0 [NRA:6]> <7>[ 133.877642] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.878825] c0 [RACB:6]< <7>[ 133.878899] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.878965] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.879063] c0 [CHKRA:6]> <6>[ 133.879144] c0 Read: 01 13 00 80 10 02 02 35 00 35 00 07 00 02 04 00 <6>[ 133.885450] c0 [NACB:6]< <6>[ 133.885523] c0 [NRA:6]> <7>[ 133.885609] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.886826] c0 [RACB:6]< <7>[ 133.886894] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.886958] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.887053] c0 [CHKRA:6]> <6>[ 133.887144] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.888982] c0 Write: 01 29 04 00 10 02 00 36 00 35 00 1d 04 01 04 00 <6>[ 133.901458] c0 [NACB:6]< <6>[ 133.901533] c0 [NRA:6]> <7>[ 133.901622] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.902824] c0 [RACB:6]< <7>[ 133.902896] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.902960] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.903056] c0 [CHKRA:6]> <6>[ 133.903155] c0 Read: 01 13 00 80 10 02 02 36 00 35 00 07 00 02 04 00 <6>[ 133.909496] c0 [NACB:6]< <6>[ 133.909585] c0 [NRA:6]> <7>[ 133.909684] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.910833] c0 [RACB:6]< <7>[ 133.910912] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.910979] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.911078] c0 [CHKRA:6]> <6>[ 133.911171] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.913118] c0 Write: 01 29 04 00 10 02 00 37 00 35 00 1d 04 01 04 00 <6>[ 133.925458] c0 [NACB:6]< <6>[ 133.925546] c0 [NRA:6]> <7>[ 133.925652] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.926848] c0 [RACB:6]< <7>[ 133.926937] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.927007] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.927105] c0 [CHKRA:6]> <6>[ 133.927191] c0 Read: 01 13 00 80 10 02 02 37 00 35 00 07 00 02 04 00 <6>[ 133.933479] c0 [NACB:6]< <6>[ 133.933551] c0 [NRA:6]> <7>[ 133.933640] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.934950] c0 [RACB:6]< <7>[ 133.935019] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.935083] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.935178] c0 [CHKRA:6]> <6>[ 133.935296] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.937621] c0 Write: 01 29 04 00 10 02 00 38 00 35 00 1d 04 01 04 00 <6>[ 133.949466] c0 [NACB:6]< <6>[ 133.949542] c0 [NRA:6]> <7>[ 133.949633] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.950834] c0 [RACB:6]< <7>[ 133.950912] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.950978] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.951073] c0 [CHKRA:6]> <6>[ 133.951172] c0 Read: 01 13 00 80 10 02 02 38 00 35 00 07 00 02 04 00 <6>[ 133.957494] c0 [NACB:6]< <6>[ 133.957593] c0 [NRA:6]> <7>[ 133.957696] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.958836] c0 [RACB:6]< <7>[ 133.958920] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.958991] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.959100] c0 [CHKRA:6]> <6>[ 133.959195] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.961911] c0 Write: 01 29 04 00 10 02 00 39 00 35 00 1d 04 01 04 00 <6>[ 133.973472] c0 [NACB:6]< <6>[ 133.973566] c0 [NRA:6]> <7>[ 133.973677] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.974835] c0 [RACB:6]< <7>[ 133.974915] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.974986] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.975092] c0 [CHKRA:6]> <6>[ 133.975226] c0 Read: 01 13 00 80 10 02 02 39 00 35 00 07 00 02 04 00 <6>[ 133.981485] c0 [NACB:6]< <6>[ 133.981558] c0 [NRA:6]> <7>[ 133.981649] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.982700] c0 [RACB:6]< <7>[ 133.982770] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.982833] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.982926] c0 [CHKRA:6]> <6>[ 133.983006] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 133.985302] c0 Write: 01 29 04 00 10 02 00 3a 00 35 00 1d 04 01 04 00 <6>[ 133.997464] c0 [NACB:6]< <6>[ 133.997541] c0 [NRA:6]> <7>[ 133.997632] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.998825] c0 [RACB:6]< <7>[ 133.998900] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 133.998964] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 133.999060] c0 [CHKRA:6]> <6>[ 133.999193] c0 Read: 01 13 00 80 10 02 02 3a 00 35 00 07 00 02 04 00 <6>[ 134.005447] c0 [NACB:6]< <6>[ 134.005518] c0 [NRA:6]> <7>[ 134.005604] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.007471] c0 [RACB:6]< <7>[ 134.007560] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.007632] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.007739] c0 [CHKRA:6]> <6>[ 134.007843] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.009977] c0 Write: 01 29 04 00 10 02 00 3b 00 35 00 1d 04 01 04 00 <6>[ 134.021456] c0 [NACB:6]< <6>[ 134.021528] c0 [NRA:6]> <7>[ 134.021616] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.022824] c0 [RACB:6]< <7>[ 134.022896] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.022958] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.023055] c0 [CHKRA:6]> <6>[ 134.023171] c0 Read: 01 13 00 80 10 02 02 3b 00 35 00 07 00 02 04 00 <6>[ 134.029487] c0 [NACB:6]< <6>[ 134.029563] c0 [NRA:6]> <7>[ 134.029654] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.030843] c0 [RACB:6]< <7>[ 134.030928] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.030998] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.031101] c0 [CHKRA:6]> <6>[ 134.031199] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.033034] c0 Write: 01 29 04 00 10 02 00 3c 00 35 00 1d 04 01 04 00 <6>[ 134.045483] c0 [NACB:6]< <6>[ 134.045562] c0 [NRA:6]> <7>[ 134.045657] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.046962] c0 [RACB:6]< <7>[ 134.047040] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.047110] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.047208] c0 [CHKRA:6]> <6>[ 134.047290] c0 Read: 01 13 00 80 10 02 02 3c 00 35 00 07 00 02 04 00 <6>[ 134.053476] c0 [NACB:6]< <6>[ 134.053544] c0 [NRA:6]> <7>[ 134.053629] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.054948] c0 [RACB:6]< <7>[ 134.055016] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.055079] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.055174] c0 [CHKRA:6]> <6>[ 134.055297] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.057428] c1 Write: 01 29 04 00 10 02 00 3d 00 35 00 1d 04 01 04 00 <6>[ 134.069465] c0 [NACB:6]< <6>[ 134.069540] c0 [NRA:6]> <7>[ 134.069630] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.070829] c0 [RACB:6]< <7>[ 134.070905] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.070968] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.071064] c0 [CHKRA:6]> <6>[ 134.071155] c0 Read: 01 13 00 80 10 02 02 3d 00 35 00 07 00 02 04 00 <6>[ 134.077482] c0 [NACB:6]< <6>[ 134.077556] c0 [NRA:6]> <7>[ 134.077648] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.078831] c0 [RACB:6]< <7>[ 134.078908] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.078974] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.079073] c0 [CHKRA:6]> <6>[ 134.079154] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.081888] c1 Write: 01 29 04 00 10 02 00 3e 00 35 00 1d 04 01 04 00 <6>[ 134.093474] c0 [NACB:6]< <6>[ 134.093572] c0 [NRA:6]> <7>[ 134.093675] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.094951] c0 [RACB:6]< <7>[ 134.095026] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.095094] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.095194] c0 [CHKRA:6]> <6>[ 134.095333] c0 Read: 01 13 00 80 10 02 02 3e 00 35 00 07 00 02 04 00 <6>[ 134.101454] c0 [NACB:6]< <6>[ 134.101526] c0 [NRA:6]> <7>[ 134.101613] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.102950] c0 [RACB:6]< <7>[ 134.103017] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.103081] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.103175] c0 [CHKRA:6]> <6>[ 134.103258] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.105186] c1 Write: 01 29 04 00 10 02 00 3f 00 35 00 1d 04 01 04 00 <6>[ 134.117463] c0 [NACB:6]< <6>[ 134.117539] c0 [NRA:6]> <7>[ 134.117629] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.118950] c0 [RACB:6]< <7>[ 134.119021] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.119085] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.119182] c0 [CHKRA:6]> <6>[ 134.119279] c0 Read: 01 13 00 80 10 02 02 3f 00 35 00 07 00 02 04 00 <6>[ 134.125457] c0 [NACB:6]< <6>[ 134.125545] c0 [NRA:6]> <7>[ 134.125645] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.126959] c0 [RACB:6]< <7>[ 134.127037] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.127103] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.127202] c0 [CHKRA:6]> <6>[ 134.127285] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.129271] c1 Write: 01 29 04 00 10 02 00 40 00 35 00 1d 04 01 04 00 <6>[ 134.141464] c0 [NACB:6]< <6>[ 134.141553] c0 [NRA:6]> <7>[ 134.141659] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.142957] c0 [RACB:6]< <7>[ 134.143040] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.143107] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.143202] c0 [CHKRA:6]> <6>[ 134.143290] c0 Read: 01 13 00 80 10 02 02 40 00 35 00 07 00 02 04 00 <6>[ 134.149485] c0 [NACB:6]< <6>[ 134.149572] c0 [NRA:6]> <7>[ 134.149667] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.151206] c0 [RACB:6]< <7>[ 134.151284] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.151349] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.151444] c0 [CHKRA:6]> <6>[ 134.151540] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.153405] c1 Write: 01 29 04 00 10 02 00 41 00 35 00 1d 04 01 04 00 <6>[ 134.165451] c0 [NACB:6]< <6>[ 134.165529] c0 [NRA:6]> <7>[ 134.165621] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.166959] c0 [RACB:6]< <7>[ 134.167035] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.167099] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.167197] c0 [CHKRA:6]> <6>[ 134.167280] c0 Read: 01 13 00 80 10 02 02 41 00 35 00 07 00 02 04 00 <6>[ 134.173486] c0 [NACB:6]< <6>[ 134.173579] c0 [NRA:6]> <7>[ 134.173686] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.174963] c0 [RACB:6]< <7>[ 134.175047] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.175118] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.175227] c0 [CHKRA:6]> <6>[ 134.175405] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.177717] c1 Write: 01 29 04 00 10 02 00 42 00 35 00 1d 04 01 04 00 <6>[ 134.189463] c0 [NACB:6]< <6>[ 134.189537] c0 [NRA:6]> <7>[ 134.189624] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.190862] c0 [RACB:6]< <7>[ 134.190962] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.191034] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.191138] c0 [CHKRA:6]> <6>[ 134.191252] c0 Read: 01 13 00 80 10 02 02 42 00 35 00 07 00 02 04 00 <6>[ 134.197498] c0 [NACB:6]< <6>[ 134.197580] c0 [NRA:6]> <7>[ 134.197673] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.198973] c0 [RACB:6]< <7>[ 134.199065] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.199135] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.199240] c0 [CHKRA:6]> <6>[ 134.199276] c1 max17047_get_soc: SOC(85, 8362 / 9821) <6>[ 134.199394] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.202501] c1 Write: 01 29 04 00 10 02 00 43 00 35 00 1d 04 01 04 00 <6>[ 134.203642] c1 battery_interval_calulation: raw soc delta(56), weight(89) <6>[ 134.203710] c1 battery_interval_calulation: weight(89) <6>[ 134.203770] c1 battery_monitor_interval: apply weight(89), 120 -> 106 <6>[ 134.203859] c1 [7] bat: s(85, -56), v(4070, -61), t(27.2), cs(2, 2), cb(0), cr(0, 0) <6>[ 134.213474] c0 [NACB:6]< <6>[ 134.213573] c0 [NRA:6]> <7>[ 134.213681] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.214845] c0 [RACB:6]< <7>[ 134.214950] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.215024] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.215131] c0 [CHKRA:6]> <6>[ 134.215290] c0 Read: 01 13 00 80 10 02 02 43 00 35 00 07 00 02 04 00 <6>[ 134.221490] c0 [NACB:6]< <6>[ 134.221564] c0 [NRA:6]> <7>[ 134.221653] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.222824] c0 [RACB:6]< <7>[ 134.222898] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.222961] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.223057] c0 [CHKRA:6]> <6>[ 134.223180] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <6>[ 134.226073] c1 Write: 01 99 01 00 10 02 00 44 00 35 00 8d 01 01 04 00 <6>[ 134.237469] c0 [NACB:6]< <6>[ 134.237554] c0 [NRA:6]> <7>[ 134.237650] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.238701] c0 [RACB:6]< <7>[ 134.238778] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.238841] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.238938] c0 [CHKRA:6]> <6>[ 134.239021] c0 Read: 01 13 00 80 10 02 02 44 00 35 00 07 00 02 04 00 <6>[ 134.261467] c0 [NACB:6]< <6>[ 134.261546] c0 [NRA:6]> <7>[ 134.261642] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.262826] c0 [RACB:6]< <7>[ 134.262900] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 134.262963] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 134.263058] c0 [CHKRA:6]> <6>[ 134.263220] c0 Read: 01 18 00 80 10 02 04 00 00 35 00 0c 00 01 04 00 <7>[ 134.760291] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 134.760484] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 134.760657] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 134.767527] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 134.776801] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 134.777666] c0 read_hsic_cb: status:-2 actual:0 <7>[ 134.779014] c0 usb 1-2: usb auto-suspend <7>[ 134.790158] c0 hub 1-0:1.0: hub_suspend <7>[ 134.790233] c0 usb usb1: bus auto-suspend <7>[ 134.790286] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 134.791516] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 134.791586] c0 request_active_lock_release <6>[ 136.740219] c0 lcd panel: brightness=39, bl=1, candela=30 <6>[ 136.790070] c0 lcd panel: brightness=29, bl=0, candela=20 <6>[ 141.575386] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 141.575480] c0 mdm_hsic_rpm_check <6>[ 141.575535] c0 request_active_lock_set <7>[ 141.575690] c0 usb usb1: usb auto-resume <7>[ 141.575738] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 141.616364] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 141.630099] c0 hub 1-0:1.0: hub_resume <7>[ 141.630202] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 141.630293] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 141.630408] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 141.630495] c3 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 141.630564] c0 mif: usb_port_resume: 1283, 4 <7>[ 141.630609] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 141.630700] c0 usb 1-2: finish resume <6>[ 141.633087] c0 usb 1-2: read_hsic: <7>[ 141.633591] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 141.633656] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 141.633750] c0 [CHKRA:3]> <7>[ 141.633806] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 141.633870] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 141.633972] c0 [CHKRA:5]> <7>[ 141.634044] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 141.634104] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 141.634196] c0 [CHKRA:6]> <7>[ 141.636745] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 141.636822] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 141.636973] c0 [NACB:5]< <6>[ 141.637048] c0 [NRA:5]> <7>[ 141.637122] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 141.637190] c0 [CHKRA:7]> <7>[ 141.637283] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 141.637347] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 141.637440] c0 [CHKRA:8]> <6>[ 141.638450] c0 [RACB:5]< <7>[ 141.638506] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 141.638569] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 141.638661] c0 [CHKRA:5]> <7>[ 141.655158] c3 hub 1-0:1.0: resume on port 2, status 0 <7>[ 141.655219] c3 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <7>[ 142.135186] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 142.135366] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 142.135532] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 142.142034] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 142.149422] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 142.150282] c0 read_hsic_cb: status:-2 actual:0 <7>[ 142.151630] c0 usb 1-2: usb auto-suspend <7>[ 142.165124] c0 hub 1-0:1.0: hub_suspend <7>[ 142.165193] c0 usb usb1: bus auto-suspend <7>[ 142.165239] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 142.165972] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 142.166023] c0 request_active_lock_release <6>[ 142.702285] c0 light_enable_store,new_value=0 <6>[ 143.397532] c0 request_suspend_state: sleep (0->3) at 143397504318 (2013-02-24 17:28:31.149667702 UTC) <7>[ 143.397674] c0 [TouchKey] sec_touchkey_early_suspend <5>[ 143.398309] c0 melfas-ts 3-0048: mms_ts_suspend: users=1 <7>[ 143.398370] c0 [TSP] release_all_fingers <7>[ 143.398484] c0 [TSP] dvfs_lock free. <7>[ 143.398518] c0 <7>[ 143.398553] c0 [TSP] melfas_power off <6>[ 143.438339] c0 lsm330dlc_accel_ioctl: opened = 1, enable = 0 <4>[ 143.450108] c0 dhd_early_suspend: enter <4>[ 143.450173] c0 dhd_set_suspend: force extra Suspend setting <6>[ 143.465970] c0 graphics fb0: lcdfreq_early_suspend <4>[ 143.466022] c0 s3cfb_extdsp_early_suspend is called <6>[ 143.466070] c0 sii9234_early_suspend() <6>[ 143.466110] c0 +s3cfb_early_suspend <6>[ 143.466152] c0 lcd panel: +s6e8ax0_early_suspend <6>[ 143.466216] c0 lcd panel: s6e8ax0_power_off <6>[ 143.591473] c0 Write: 01 13 00 00 0c 01 00 06 00 01 00 07 00 01 04 00 <6>[ 143.591539] c0 request_active_lock_set <7>[ 143.591674] c0 usb usb1: usb auto-resume <7>[ 143.591705] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 143.610076] c0 lcd panel: -s6e8ax0_early_suspend <6>[ 143.624795] c0 s5p-dsim s5p-dsim.0: +s5p_dsim_early_suspend <6>[ 143.624847] c0 lcd_power_on : enable=0 <6>[ 143.625445] c0 s5p-dsim s5p-dsim.0: -s5p_dsim_early_suspend <7>[ 143.625487] c0 s3cfb - disable power domain <6>[ 143.625729] c0 -s3cfb_early_suspend <3>[ 143.625771] c0 CPU_DOWN 1 <6>[ 143.625879] c0 active wake lock mdm_hsic_pm0 <6>[ 143.625912] c1 sync_system + <6>[ 143.625938] c0 active wake lock PowerManagerService <6>[ 143.625972] c0 active wake lock PowerManagerService.Broadcasts <5>[ 143.630458] c0 CPU1: shutdown <3>[ 143.632130] c0 CPU_DOWN 3 <5>[ 143.635847] c0 CPU3: shutdown <6>[ 143.641802] c0 sync_system - <7>[ 143.645071] c0 hub 1-0:1.0: hub_resume <7>[ 143.645140] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 143.645205] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 143.645284] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 143.645346] c0 mif: usb_port_resume: 1283, 4 <7>[ 143.645384] c0 usb 1-2: finish resume <7>[ 143.645474] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 143.645529] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 143.648780] c0 usb 1-2: read_hsic: <7>[ 143.648953] c0 s5p-ehci s5p-ehci: reused qh ead435c0 schedule <7>[ 143.649001] c0 usb 1-2: link qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 143.649068] c0 [CHKRA:3]> <7>[ 143.649106] c0 s5p-ehci s5p-ehci: reused qh ead43ec0 schedule <7>[ 143.649153] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 143.649219] c0 [CHKRA:5]> <7>[ 143.649255] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 143.649301] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.649365] c0 [CHKRA:6]> <7>[ 143.649408] c0 s5p-ehci s5p-ehci: reused qh ead43040 schedule <7>[ 143.649455] c0 usb 1-2: link qh8-0001/ead43040 start 6 [2/0 us] <6>[ 143.649520] c0 [CHKRA:7]> <7>[ 143.649554] c0 s5p-ehci s5p-ehci: reused qh ead43580 schedule <7>[ 143.649600] c0 usb 1-2: link qh8-0001/ead43580 start 7 [2/0 us] <6>[ 143.649664] c0 [CHKRA:8]> <6>[ 143.671905] c0 [NACB:6]< <6>[ 143.671950] c0 [NRA:6]> <7>[ 143.672014] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.673257] c0 [RACB:6]< <7>[ 143.673323] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 143.673369] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.673430] c0 [CHKRA:6]> <6>[ 143.673488] c0 Read: 01 1a 00 80 0c 01 02 06 00 01 00 0e 00 02 04 00 <6>[ 143.673981] c0 Write: 01 b5 00 00 03 01 00 2c 00 50 00 a9 00 10 0f 00 <6>[ 143.687902] c0 [NACB:6]< <6>[ 143.687945] c0 [NRA:6]> <7>[ 143.688009] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.689257] c0 [RACB:6]< <7>[ 143.689318] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 143.689362] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.689424] c0 [CHKRA:6]> <6>[ 143.689480] c0 Read: 01 13 00 80 03 01 02 2c 00 50 00 07 00 02 04 00 <6>[ 143.689886] c0 Write: 01 10 00 00 03 01 00 2d 00 02 00 04 00 12 01 00 <6>[ 143.703903] c0 [NACB:6]< <6>[ 143.703946] c0 [NRA:6]> <7>[ 143.704010] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.705261] c0 [RACB:6]< <7>[ 143.705318] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 143.705362] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.705423] c0 [CHKRA:6]> <6>[ 143.705477] c0 Read: 01 13 00 80 03 01 02 2d 00 02 00 07 00 02 04 00 <6>[ 143.705897] c0 Write: 01 3c 00 00 03 01 00 2e 00 03 00 30 00 10 01 00 <6>[ 143.719904] c0 [NACB:6]< <6>[ 143.719947] c0 [NRA:6]> <7>[ 143.720011] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.721258] c0 [RACB:6]< <7>[ 143.721314] c0 s5p-ehci s5p-ehci: reused qh ead43400 schedule <7>[ 143.721358] c0 usb 1-2: link qh8-0001/ead43400 start 5 [2/0 us] <6>[ 143.721419] c0 [CHKRA:6]> <6>[ 143.721472] c0 Read: 01 13 00 80 03 01 02 2e 00 03 00 07 00 02 04 00 <7>[ 144.220379] c0 usb 1-2: unlink qh8-0001/ead43580 start 7 [2/0 us] <7>[ 144.220752] c0 usb 1-2: unlink qh8-0001/ead43040 start 6 [2/0 us] <7>[ 144.221090] c0 usb 1-2: unlink qh8-0001/ead43400 start 5 [2/0 us] <7>[ 144.234878] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 144.248135] c0 usb 1-2: unlink qh8-0001/ead435c0 start 3 [2/0 us] <6>[ 144.249109] c0 read_hsic_cb: status:-2 actual:0 <7>[ 144.250828] c0 usb 1-2: usb auto-suspend <7>[ 144.265229] c0 hub 1-0:1.0: hub_suspend <7>[ 144.265370] c0 usb usb1: bus auto-suspend <7>[ 144.265476] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 144.265968] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 144.266092] c0 request_active_lock_release <6>[ 144.286360] c0 suspend: enter suspend <6>[ 144.286491] c0 suspend: enter suspend, (2013-02-24 17:28:32.038626161 UTC) <6>[ 144.286643] c0 PM: Syncing filesystems ... done. <6>[ 144.312923] c0 mdm_hsic_pm_notify_event: block request <4>[ 144.312953] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 144.330182] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 144.345119] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 144.345377] c0 samsung_battery_prepare <6>[ 144.345402] c0 battery_monitor_interval: apply weight(89), 7200 -> 6408 <6>[ 144.346929] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 144.347025] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 144.347073] c0 dev rdy val = 1 <6>[ 144.347091] c0 set_host_stat:set host port power status to [0] <6>[ 144.357109] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 144.377082] c0 done <6>[ 144.377101] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 144.381112] c0 wm8994-codec wm8994-codec: write 204 = 8 <6>[ 144.381320] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 144.381352] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 144.381547] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 144.381738] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 144.381773] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 144.381970] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 144.382003] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 144.382193] c0 Sound: disabled mclk <7>[ 144.382214] c0 pmu_debug: 0x00000901 <6>[ 144.382234] c0 Sound: state: 0, use_cnt: 0 <7>[ 144.382254] c0 xusbxti_control: 0 <6>[ 144.405332] c0 max77686_rtc_read_time: 113/1/24 17:28:32(0) <6>[ 144.430330] c0 max77686_rtc_read_time: 113/1/24 17:28:32(0) <6>[ 144.430361] c0 max77686_rtc_set_alarm: 113/1/24 17:28:36(0) <6>[ 144.455329] c0 max77686_rtc_stop_alarm: 113/1/24 16:49:48(0) <6>[ 144.530344] c0 max77686_rtc_start_alarm: 113/1/24 17:28:36(0) <6>[ 144.580330] c0 max77686_rtc_read_time: 113/1/24 17:28:32(0) <6>[ 144.605329] c0 max77686_rtc_read_time: 113/1/24 17:28:32(0) <6>[ 144.605458] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 144.606062] c0 wake enabled for irq 359 <6>[ 144.606611] c0 max77693_charger_suspend <6>[ 144.607484] c0 wake enabled for irq 365 <6>[ 144.607519] c0 max17047_fuelgauge_suspend <6>[ 144.607543] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4070625), valrt(3350000) <6>[ 144.607582] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 144.608772] c0 wake enabled for irq 375 <6>[ 144.608794] c0 wake enabled for irq 353 <6>[ 144.608821] c0 samsung_battery_suspend <6>[ 144.608880] c0 flite_suspend <6>[ 144.608897] c0 flite_suspend-- <6>[ 144.608915] c0 flite_suspend <6>[ 144.608931] c0 flite_suspend-- <6>[ 144.608985] c0 fimc_suspend <6>[ 144.609002] c0 fimc_suspend-- <6>[ 144.609020] c0 fimc_suspend <6>[ 144.609036] c0 fimc_suspend-- <6>[ 144.609055] c0 fimc_suspend <6>[ 144.609070] c0 fimc_suspend-- <6>[ 144.609088] c0 fimc_suspend <6>[ 144.609103] c0 fimc_suspend-- <6>[ 144.609125] c0 s5p_int_src_ext_hpd() <6>[ 144.609156] c0 FIMC_IS suspend <6>[ 144.609172] c0 FIMC_IS suspend end <6>[ 144.609198] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 144.609234] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 144.609270] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 144.609300] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 144.609338] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 144.609826] c0 sdhci_suspend_host : MMC Card OFF <6>[ 144.610179] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 144.615063] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 144.615097] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 144.660494] c0 PM: suspend of devices complete after 314.155 msecs <7>[ 144.660525] c0 suspend_enter:148 <4>[ 144.660811] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 144.660842] c0 suspend_set_state: vdd_int range: No configuration <4>[ 144.660872] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 144.660901] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 144.660934] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 144.660966] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 144.660999] c0 suspend_enter:156 <7>[ 144.661716] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 144.661743] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 144.661832] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 144.661859] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 144.661886] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 144.661912] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 144.661939] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 144.661965] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 144.661992] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 144.662018] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 144.662044] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 144.662070] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 144.662161] c0 platform_pm_suspend_noirq: power.0+ <6>[ 144.662186] c0 power_suspend_late return 0 <7>[ 144.662207] c0 platform_pm_suspend_noirq: power.0- <6>[ 144.662234] c0 PM: late suspend of devices complete after 1.215 msecs <7>[ 144.662265] c0 suspend_enter:164 <4>[ 144.662283] c0 Disabling non-boot CPUs ... <7>[ 144.662304] c0 suspend_enter:179 <7>[ 144.662429] c0 suspend_enter:186 <1>[ 144.662741] c0 PM: SLEEP <1>[ 144.662761] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 144.662508] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 144.663534] c0 PM: early resume of devices complete after 0.964 msecs <6>[ 144.663716] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 144.664011] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 144.664276] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 144.664465] c0 s3c2410-wdt: watchdog disabled <6>[ 144.664497] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 144.665185] c0 sdhci_resume_host : MMC Card ON <6>[ 144.824560] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 144.824602] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 144.824638] c0 FIMC_IS resume <6>[ 144.824655] c0 FIMC_IS resume end <6>[ 144.824701] c0 fimc_resume <6>[ 144.824719] c0 fimc_resume-- <6>[ 144.824739] c0 fimc_resume <6>[ 144.824756] c0 fimc_resume-- <6>[ 144.824774] c0 fimc_resume <6>[ 144.824791] c0 fimc_resume-- <6>[ 144.824810] c0 fimc_resume <6>[ 144.824873] c0 fimc_resume-- <6>[ 144.824923] c0 flite_resume <6>[ 144.824940] c0 flite_resume-- <6>[ 144.824960] c0 flite_resume <6>[ 144.824977] c0 flite_resume-- <6>[ 144.826417] c0 samsung_battery_resume <6>[ 144.830062] c0 wake disabled for irq 375 <7>[ 144.830086] c0 [keys]PWR 0 <6>[ 144.830105] c0 wake disabled for irq 353 <6>[ 144.830260] c0 max17047_fuelgauge_resume <6>[ 144.830285] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 144.831434] c0 wake disabled for irq 365 <6>[ 144.835740] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 144.835775] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 144.835817] c0 max77693_charger_resume <6>[ 144.836766] c0 wake disabled for irq 359 <6>[ 144.836953] c0 max77686_irq_thread: irq_src=0x1 <6>[ 144.837255] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 144.837423] c0 max77686_irq_thread: rtc int=0x13 <6>[ 144.837454] c0 max77686-rtc max77686-rtc: max77686_rtc_alarm_irq:irq(464) <6>[ 144.837634] c0 max77686_irq_thread: irq_src=0x0 <6>[ 144.837930] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 144.838317] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 144.839918] c0 max17047_get_soc: SOC(85, 8351 / 9821) <6>[ 144.842048] c0 battery_interval_calulation: v diff(43500), weight(120) <6>[ 144.842088] c0 battery_interval_calulation: weight(120) <6>[ 144.842124] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 144.842181] c0 wakeup wake lock: power-supply <6>[ 144.842216] c0 [8] bat: s(85, -11), v(4087, -43), t(26.1), cs(2, 2), cb(0), cr(0, 0) <6>[ 144.865359] c0 max77686_rtc_read_time: 113/1/24 17:28:36(0) <6>[ 144.890375] c0 max77686_rtc_stop_alarm: 113/1/24 17:28:36(0) <6>[ 144.940362] c0 max77686_rtc_read_time: 113/1/24 17:28:36(0) <6>[ 144.940767] c0 set hsic lpa phy init <6>[ 144.940793] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 144.940960] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 144.941005] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 144.941044] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 144.941076] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 144.941106] c0 usb usb1: root hub lost power or was reset <7>[ 144.941145] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 144.941762] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 144.941830] c0 Sound: enabled mclk <7>[ 144.941852] c0 pmu_debug: 0x00000900 <6>[ 144.951860] c0 Sound: state: 1, use_cnt: 1 <6>[ 144.951886] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 144.951931] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 144.960053] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 144.960087] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 144.960281] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 144.960476] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 144.965043] c0 dev rdy val = 0 <6>[ 144.965064] c0 set_host_stat:set host port power status to [1] <6>[ 144.965097] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 145.005482] c0 done <7>[ 145.020065] c0 usb usb1: usb resume <7>[ 145.020089] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 145.050050] c0 hub 1-0:1.0: hub_reset_resume <7>[ 145.050078] c0 hub 1-0:1.0: enabling power on all ports <7>[ 145.050145] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 145.050193] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 145.050298] c0 mif: usb_port_resume: 1281, 0 <6>[ 145.050364] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 145.050392] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 145.050421] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 145.050467] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 145.050502] c0 s5p-ohci s5p-ohci: lost power <7>[ 145.085048] c0 usb 1-2: finish reset-resume <7>[ 145.109056] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 145.109089] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 145.109129] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 145.109166] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 145.109198] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 145.109231] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 145.109271] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 145.109302] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 145.109339] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 145.109375] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 145.109410] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 145.109447] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 145.109484] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 145.109518] c0 s5p-ohci s5p-ohci: restart complete <4>[ 145.109545] c0 usb usb2: root hub lost power or was reset <7>[ 145.109575] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 145.109633] c0 usb usb2: usb resume <7>[ 145.115052] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 145.140140] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 145.140175] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 145.140255] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 145.183795] c0 usb 1-2: read_hsic: <7>[ 145.183957] c0 usb 1-2: link qh8-0001/ead43580 start 0 [2/0 us] <6>[ 145.184011] c0 [CHKRA:3]> <7>[ 145.184046] c0 usb 1-2: link qh8-0001/ead43040 start 1 [2/0 us] <6>[ 145.184099] c0 [CHKRA:5]> <7>[ 145.184133] c0 usb 1-2: link qh8-0001/ead43400 start 2 [2/0 us] <6>[ 145.184187] c0 [CHKRA:6]> <7>[ 145.184225] c0 usb 1-2: link qh8-0001/ead43b40 start 3 [2/0 us] <6>[ 145.184277] c0 [CHKRA:7]> <7>[ 145.184310] c0 usb 1-2: link qh8-0001/ead43ec0 start 4 [2/0 us] <6>[ 145.184362] c0 [CHKRA:8]> <6>[ 145.189916] c0 [NACB:3]< <7>[ 145.189938] c0 usb 1-2: serial state: 3 <6>[ 145.189961] c0 notification_available_cb: set lpa handling to false <6>[ 145.190001] c0 [CHKRA:3]> <7>[ 145.195063] c0 hub 2-0:1.0: hub_reset_resume <7>[ 145.195092] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 145.300238] c0 PM: resume of devices complete after 636.479 msecs <6>[ 145.300653] c0 samsung_battery_complete <6>[ 145.300680] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 145.300929] c0 Restarting tasks ... <6>[ 145.305045] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 145.305110] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 145.305529] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 145.305582] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 145.305625] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 145.308713] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 145.313426] c0 done. <6>[ 145.320951] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 145.320988] c0 request_active_lock_set <6>[ 145.321022] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:28:36.475895665 UTC) <6>[ 145.321064] c0 active wake lock mdm_hsic_pm0 <6>[ 145.321091] c0 active wake lock battery-monitor, time left 104 <6>[ 145.321123] c0 active wake lock alarm, time left 942 <6>[ 145.321151] c0 suspend: abort suspend <6>[ 145.340071] c0 mdm_hsic_rpm_check <6>[ 145.340099] c0 mdm_hsic_rpm_restart <7>[ 145.685149] c0 usb 1-2: unlink qh8-0001/ead43ec0 start 4 [2/0 us] <7>[ 145.685294] c0 usb 1-2: unlink qh8-0001/ead43b40 start 3 [2/0 us] <7>[ 145.685428] c0 usb 1-2: unlink qh8-0001/ead43400 start 2 [2/0 us] <7>[ 145.692083] c0 usb 1-2: unlink qh8-0001/ead43040 start 1 [2/0 us] <7>[ 145.698579] c0 usb 1-2: unlink qh8-0001/ead43580 start 0 [2/0 us] <6>[ 145.698905] c0 read_hsic_cb: status:-2 actual:0 <7>[ 145.699943] c0 usb 1-2: usb auto-suspend <7>[ 145.710125] c0 hub 1-0:1.0: hub_suspend <7>[ 145.710169] c0 usb usb1: bus auto-suspend <7>[ 145.710197] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 145.710928] c0 request_active_lock_release <6>[ 145.840049] c0 wake lock battery-monitor, expired <6>[ 145.880525] c0 suspend: enter suspend <6>[ 145.880550] c0 suspend: enter suspend, (2013-02-24 17:28:37.035427875 UTC) <6>[ 145.880582] c0 PM: Syncing filesystems ... done. <6>[ 145.885056] c0 mdm_hsic_pm_notify_event: block request <4>[ 145.885083] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 145.900213] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 145.915136] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 145.915345] c0 samsung_battery_prepare <6>[ 145.915366] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <7>[ 145.916516] c0 hub 2-0:1.0: hub_suspend <7>[ 145.916547] c0 usb usb2: bus suspend <7>[ 145.916567] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 145.916613] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 145.916691] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 145.916735] c0 dev rdy val = 1 <6>[ 145.916751] c0 set_host_stat:set host port power status to [0] <6>[ 145.926762] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 145.956712] c0 done <6>[ 145.956729] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 145.959587] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 145.959617] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 145.959811] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 145.959994] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 145.960036] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 145.960225] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 145.960254] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 145.960434] c0 Sound: disabled mclk <7>[ 145.960454] c0 pmu_debug: 0x00000901 <6>[ 145.960472] c0 Sound: state: 0, use_cnt: 0 <7>[ 145.960491] c0 xusbxti_control: 0 <6>[ 145.985318] c0 max77686_rtc_read_time: 113/1/24 17:28:37(0) <6>[ 146.010324] c0 max77686_rtc_read_time: 113/1/24 17:28:37(0) <6>[ 146.010352] c0 max77686_rtc_set_alarm: 113/1/24 17:29:1(0) <6>[ 146.035313] c0 max77686_rtc_stop_alarm: 113/1/24 17:28:36(0) <6>[ 146.110324] c0 max77686_rtc_start_alarm: 113/1/24 17:29:1(0) <6>[ 146.160323] c0 max77686_rtc_read_time: 113/1/24 17:28:37(0) <6>[ 146.185315] c0 max77686_rtc_read_time: 113/1/24 17:28:37(0) <6>[ 146.185416] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 146.185905] c0 wake enabled for irq 359 <6>[ 146.186380] c0 max77693_charger_suspend <6>[ 146.187226] c0 wake enabled for irq 365 <6>[ 146.187257] c0 max17047_fuelgauge_suspend <6>[ 146.187278] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4087500), valrt(3350000) <6>[ 146.187314] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 146.188455] c0 wake enabled for irq 375 <6>[ 146.188475] c0 wake enabled for irq 353 <6>[ 146.188499] c0 samsung_battery_suspend <6>[ 146.188550] c0 flite_suspend <6>[ 146.188564] c0 flite_suspend-- <6>[ 146.188580] c0 flite_suspend <6>[ 146.188594] c0 flite_suspend-- <6>[ 146.188639] c0 fimc_suspend <6>[ 146.188654] c0 fimc_suspend-- <6>[ 146.188671] c0 fimc_suspend <6>[ 146.188685] c0 fimc_suspend-- <6>[ 146.188701] c0 fimc_suspend <6>[ 146.188715] c0 fimc_suspend-- <6>[ 146.188731] c0 fimc_suspend <6>[ 146.188745] c0 fimc_suspend-- <6>[ 146.188764] c0 s5p_int_src_ext_hpd() <6>[ 146.188791] c0 FIMC_IS suspend <6>[ 146.188806] c0 FIMC_IS suspend end <6>[ 146.188830] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 146.188859] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 146.188893] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 146.189354] c0 sdhci_suspend_host : MMC Card OFF <6>[ 146.189665] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 146.195059] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 146.195091] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 146.239882] c0 PM: suspend of devices complete after 323.768 msecs <7>[ 146.239909] c0 suspend_enter:148 <4>[ 146.240173] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 146.240201] c0 suspend_set_state: vdd_int range: No configuration <4>[ 146.240228] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 146.240254] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 146.240284] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 146.240314] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 146.240343] c0 suspend_enter:156 <7>[ 146.240883] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 146.240908] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 146.240980] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 146.241003] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 146.241028] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 146.241051] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 146.241076] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 146.241100] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 146.241124] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 146.241148] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 146.241173] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 146.241196] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 146.241268] c0 platform_pm_suspend_noirq: power.0+ <6>[ 146.241291] c0 power_suspend_late return 0 <7>[ 146.241310] c0 platform_pm_suspend_noirq: power.0- <6>[ 146.241335] c0 PM: late suspend of devices complete after 0.973 msecs <7>[ 146.241362] c0 suspend_enter:164 <4>[ 146.241378] c0 Disabling non-boot CPUs ... <7>[ 146.241398] c0 suspend_enter:179 <7>[ 146.241514] c0 suspend_enter:186 <1>[ 146.241825] c0 PM: SLEEP <1>[ 146.241842] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 146.241595] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 146.242624] c0 PM: early resume of devices complete after 0.967 msecs <6>[ 146.242789] c0 wakeup wake lock: wlan_wake <6>[ 146.242887] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 146.243651] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 146.243919] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 146.244111] c0 s3c2410-wdt: watchdog disabled <6>[ 146.244143] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 146.244736] c0 sdhci_resume_host : MMC Card ON <6>[ 146.404491] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 146.404535] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 146.404571] c0 FIMC_IS resume <6>[ 146.404590] c0 FIMC_IS resume end <6>[ 146.404636] c0 fimc_resume <6>[ 146.404654] c0 fimc_resume-- <6>[ 146.404674] c0 fimc_resume <6>[ 146.404691] c0 fimc_resume-- <6>[ 146.404710] c0 fimc_resume <6>[ 146.404727] c0 fimc_resume-- <6>[ 146.404746] c0 fimc_resume <6>[ 146.404808] c0 fimc_resume-- <6>[ 146.404859] c0 flite_resume <6>[ 146.404877] c0 flite_resume-- <6>[ 146.404897] c0 flite_resume <6>[ 146.404914] c0 flite_resume-- <6>[ 146.406358] c0 samsung_battery_resume <6>[ 146.410070] c0 wake disabled for irq 375 <7>[ 146.410094] c0 [keys]PWR 0 <6>[ 146.410113] c0 wake disabled for irq 353 <6>[ 146.410266] c0 max17047_fuelgauge_resume <6>[ 146.410291] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 146.411442] c0 wake disabled for irq 365 <6>[ 146.416089] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 146.416125] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 146.416168] c0 max77693_charger_resume <6>[ 146.417117] c0 wake disabled for irq 359 <6>[ 146.419295] c0 max17047_get_soc: SOC(85, 8351 / 9821) <6>[ 146.420049] c0 max77686_irq_thread: irq_src=0x0 <6>[ 146.420347] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 146.420731] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 146.421967] c0 battery_interval_calulation: v diff(46000), weight(120) <6>[ 146.422003] c0 battery_interval_calulation: weight(120) <6>[ 146.422034] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 146.422081] c0 [9] bat: s(85, 0), v(4085, -46), t(26.9), cs(2, 2), cb(0), cr(0, 0) <6>[ 146.455376] c0 max77686_rtc_read_time: 113/1/24 17:28:49(0) <6>[ 146.455778] c0 set hsic lpa phy init <6>[ 146.455805] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 146.455970] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 146.456016] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 146.456055] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 146.456088] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 146.456118] c0 usb usb1: root hub lost power or was reset <7>[ 146.456158] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 146.456777] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 146.456846] c0 Sound: enabled mclk <7>[ 146.456868] c0 pmu_debug: 0x00000900 <6>[ 146.466900] c0 Sound: state: 1, use_cnt: 1 <6>[ 146.466928] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 146.466973] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 146.475180] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 146.475216] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 146.475411] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 146.475607] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 146.480052] c0 dev rdy val = 0 <6>[ 146.480073] c0 set_host_stat:set host port power status to [1] <6>[ 146.480107] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 146.540635] c0 done <7>[ 146.555069] c0 usb usb1: usb resume <7>[ 146.555094] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 146.585057] c0 hub 1-0:1.0: hub_reset_resume <7>[ 146.585085] c0 hub 1-0:1.0: enabling power on all ports <7>[ 146.585152] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 146.585202] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 146.585307] c0 mif: usb_port_resume: 1281, 0 <6>[ 146.585358] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 146.585386] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 146.585416] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 146.585462] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 146.585498] c0 s5p-ohci s5p-ohci: lost power <7>[ 146.620054] c0 usb 1-2: finish reset-resume <7>[ 146.644061] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 146.644095] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 146.644135] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 146.644174] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 146.644207] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 146.644240] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 146.644281] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 146.644312] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 146.644350] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 146.644387] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 146.644423] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 146.644461] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 146.644498] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 146.644534] c0 s5p-ohci s5p-ohci: restart complete <4>[ 146.644561] c0 usb usb2: root hub lost power or was reset <7>[ 146.644592] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 146.644650] c0 usb usb2: usb resume <7>[ 146.650044] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 146.675154] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 146.675191] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 146.675271] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 146.721310] c0 usb 1-2: read_hsic: <7>[ 146.721469] c0 usb 1-2: link qh8-0001/eb258100 start 5 [2/0 us] <6>[ 146.721523] c0 [CHKRA:3]> <7>[ 146.721559] c0 usb 1-2: link qh8-0001/eb258140 start 6 [2/0 us] <6>[ 146.721612] c0 [CHKRA:5]> <7>[ 146.721646] c0 usb 1-2: link qh8-0001/eb258180 start 7 [2/0 us] <6>[ 146.721700] c0 [CHKRA:6]> <7>[ 146.721737] c0 usb 1-2: link qh8-0001/eb2581c0 start 0 [2/0 us] <6>[ 146.721791] c0 [CHKRA:7]> <7>[ 146.721824] c0 usb 1-2: link qh8-0001/eb258200 start 1 [2/0 us] <6>[ 146.721877] c0 [CHKRA:8]> <6>[ 146.725929] c0 [NACB:3]< <7>[ 146.725950] c0 usb 1-2: serial state: 3 <6>[ 146.725974] c0 notification_available_cb: set lpa handling to false <6>[ 146.726015] c0 [CHKRA:3]> <7>[ 146.730062] c0 hub 2-0:1.0: hub_reset_resume <7>[ 146.730090] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 146.835463] c0 PM: resume of devices complete after 592.533 msecs <6>[ 146.835866] c0 samsung_battery_complete <6>[ 146.835893] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 146.836133] c0 Restarting tasks ... <6>[ 146.840052] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 146.840117] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 146.840538] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 146.840590] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 146.840635] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 146.843707] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 146.848755] c0 done. <6>[ 146.855138] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 146.855175] c0 request_active_lock_set <6>[ 146.855210] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:28:49.425083418 UTC) <6>[ 146.875087] c0 mdm_hsic_rpm_check <6>[ 146.875116] c0 mdm_hsic_rpm_restart <7>[ 147.220246] c0 usb 1-2: unlink qh8-0001/eb258200 start 1 [2/0 us] <7>[ 147.220464] c0 usb 1-2: unlink qh8-0001/eb2581c0 start 0 [2/0 us] <7>[ 147.220662] c0 usb 1-2: unlink qh8-0001/eb258180 start 7 [2/0 us] <7>[ 147.227274] c0 usb 1-2: unlink qh8-0001/eb258140 start 6 [2/0 us] <7>[ 147.233896] c0 usb 1-2: unlink qh8-0001/eb258100 start 5 [2/0 us] <6>[ 147.234438] c0 read_hsic_cb: status:-2 actual:0 <7>[ 147.236101] c0 usb 1-2: usb auto-suspend <7>[ 147.250110] c0 hub 1-0:1.0: hub_suspend <7>[ 147.250190] c0 usb usb1: bus auto-suspend <7>[ 147.250243] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 147.250959] c0 request_active_lock_release <6>[ 147.420045] c0 wake lock wlan_ctrl_wake, expired <6>[ 147.420081] c0 wake lock battery-monitor, expired <6>[ 147.452641] c0 suspend: enter suspend <6>[ 147.452677] c0 suspend: enter suspend, (2013-02-24 17:28:50.022551085 UTC) <6>[ 147.452720] c0 PM: Syncing filesystems ... done. <6>[ 147.458689] c0 mdm_hsic_pm_notify_event: block request <4>[ 147.458720] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 147.475207] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 147.490185] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 147.490444] c0 samsung_battery_prepare <6>[ 147.490468] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <7>[ 147.491982] c0 hub 2-0:1.0: hub_suspend <7>[ 147.492016] c0 usb usb2: bus suspend <7>[ 147.492039] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 147.492088] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 147.492184] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 147.492232] c0 dev rdy val = 1 <6>[ 147.492249] c0 set_host_stat:set host port power status to [0] <6>[ 147.502284] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 147.532256] c0 done <6>[ 147.532275] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 147.536276] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 147.536309] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 147.536514] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 147.536706] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 147.536740] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 147.536937] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 147.536970] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 147.537159] c0 Sound: disabled mclk <7>[ 147.537181] c0 pmu_debug: 0x00000901 <6>[ 147.537200] c0 Sound: state: 0, use_cnt: 0 <7>[ 147.537221] c0 xusbxti_control: 0 <6>[ 147.560345] c0 max77686_rtc_read_time: 113/1/24 17:28:50(0) <6>[ 147.585343] c0 max77686_rtc_stop_alarm: 113/1/24 17:29:1(0) <6>[ 147.635343] c0 max77686_rtc_read_time: 113/1/24 17:28:50(0) <6>[ 147.635373] c0 max77686_rtc_set_alarm: 113/1/24 17:29:1(0) <6>[ 147.660342] c0 max77686_rtc_stop_alarm: 113/1/24 17:29:1(0) <6>[ 147.735342] c0 max77686_rtc_start_alarm: 113/1/24 17:29:1(0) <6>[ 147.785341] c0 max77686_rtc_read_time: 113/1/24 17:28:50(0) <6>[ 147.810342] c0 max77686_rtc_read_time: 113/1/24 17:28:50(0) <6>[ 147.810469] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 147.811071] c0 wake enabled for irq 359 <6>[ 147.811619] c0 max77693_charger_suspend <6>[ 147.812494] c0 wake enabled for irq 365 <6>[ 147.812530] c0 max17047_fuelgauge_suspend <6>[ 147.812554] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4085000), valrt(3350000) <6>[ 147.812593] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 147.813781] c0 wake enabled for irq 375 <6>[ 147.813803] c0 wake enabled for irq 353 <6>[ 147.813830] c0 samsung_battery_suspend <6>[ 147.813890] c0 flite_suspend <6>[ 147.813906] c0 flite_suspend-- <6>[ 147.813925] c0 flite_suspend <6>[ 147.813941] c0 flite_suspend-- <6>[ 147.813995] c0 fimc_suspend <6>[ 147.814012] c0 fimc_suspend-- <6>[ 147.814031] c0 fimc_suspend <6>[ 147.814046] c0 fimc_suspend-- <6>[ 147.814065] c0 fimc_suspend <6>[ 147.814080] c0 fimc_suspend-- <6>[ 147.814098] c0 fimc_suspend <6>[ 147.814114] c0 fimc_suspend-- <6>[ 147.814136] c0 s5p_int_src_ext_hpd() <6>[ 147.814167] c0 FIMC_IS suspend <6>[ 147.814183] c0 FIMC_IS suspend end <6>[ 147.814212] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 147.814243] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 147.814280] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 147.814769] c0 sdhci_suspend_host : MMC Card OFF <6>[ 147.815121] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 147.820076] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 147.820112] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 147.865434] c0 PM: suspend of devices complete after 374.026 msecs <7>[ 147.865465] c0 suspend_enter:148 <4>[ 147.865751] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 147.865782] c0 suspend_set_state: vdd_int range: No configuration <4>[ 147.865812] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 147.865842] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 147.865874] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 147.865907] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 147.865939] c0 suspend_enter:156 <7>[ 147.866648] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 147.866676] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 147.866765] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 147.866791] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 147.866819] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 147.866844] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 147.866872] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 147.866897] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 147.866924] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 147.866950] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 147.866978] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 147.867003] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 147.867094] c0 platform_pm_suspend_noirq: power.0+ <6>[ 147.867119] c0 power_suspend_late return 0 <7>[ 147.867140] c0 platform_pm_suspend_noirq: power.0- <6>[ 147.867168] c0 PM: late suspend of devices complete after 1.209 msecs <7>[ 147.867198] c0 suspend_enter:164 <4>[ 147.867216] c0 Disabling non-boot CPUs ... <7>[ 147.867238] c0 suspend_enter:179 <7>[ 147.867362] c0 suspend_enter:186 <1>[ 147.867675] c0 PM: SLEEP <1>[ 147.867694] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 147.867441] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 147.868466] c0 PM: early resume of devices complete after 0.963 msecs <6>[ 147.868628] c0 wakeup wake lock: wlan_wake <6>[ 147.868725] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 147.869469] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 147.869735] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 147.869923] c0 s3c2410-wdt: watchdog disabled <6>[ 147.869954] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 147.870587] c0 sdhci_resume_host : MMC Card ON <6>[ 148.029483] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 148.029525] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 148.029560] c0 FIMC_IS resume <6>[ 148.029578] c0 FIMC_IS resume end <6>[ 148.029625] c0 fimc_resume <6>[ 148.029643] c0 fimc_resume-- <6>[ 148.029662] c0 fimc_resume <6>[ 148.029679] c0 fimc_resume-- <6>[ 148.029698] c0 fimc_resume <6>[ 148.029715] c0 fimc_resume-- <6>[ 148.029733] c0 fimc_resume <6>[ 148.029793] c0 fimc_resume-- <6>[ 148.029843] c0 flite_resume <6>[ 148.029860] c0 flite_resume-- <6>[ 148.029880] c0 flite_resume <6>[ 148.029897] c0 flite_resume-- <6>[ 148.031340] c0 samsung_battery_resume <6>[ 148.035076] c0 wake disabled for irq 375 <7>[ 148.035101] c0 [keys]PWR 0 <6>[ 148.035119] c0 wake disabled for irq 353 <6>[ 148.035271] c0 max17047_fuelgauge_resume <6>[ 148.035296] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 148.036444] c0 wake disabled for irq 365 <6>[ 148.041185] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 148.041221] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 148.041264] c0 max77693_charger_resume <6>[ 148.042212] c0 wake disabled for irq 359 <6>[ 148.044389] c0 max17047_get_soc: SOC(85, 8351 / 9821) <6>[ 148.045066] c0 max77686_irq_thread: irq_src=0x0 <6>[ 148.045363] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 148.045745] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 148.047077] c0 [10] bat: s(85, 0), v(4080, -51), t(27.3), cs(2, 2), cb(0), cr(0, 0) <6>[ 148.080382] c0 max77686_rtc_read_time: 113/1/24 17:28:56(0) <6>[ 148.080781] c0 set hsic lpa phy init <6>[ 148.080808] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 148.080973] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 148.081018] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 148.081057] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 148.081088] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 148.081118] c0 usb usb1: root hub lost power or was reset <7>[ 148.081158] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 148.081775] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 148.081842] c0 Sound: enabled mclk <7>[ 148.081864] c0 pmu_debug: 0x00000900 <6>[ 148.091895] c0 Sound: state: 1, use_cnt: 1 <6>[ 148.091922] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 148.091968] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 148.100175] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 148.100210] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 148.100406] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 148.100601] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 148.105058] c0 dev rdy val = 0 <6>[ 148.105079] c0 set_host_stat:set host port power status to [1] <6>[ 148.105111] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 148.155615] c0 done <7>[ 148.170078] c0 usb usb1: usb resume <7>[ 148.170103] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 148.200057] c0 hub 1-0:1.0: hub_reset_resume <7>[ 148.200085] c0 hub 1-0:1.0: enabling power on all ports <7>[ 148.200151] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 148.200200] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 148.200304] c0 mif: usb_port_resume: 1281, 0 <6>[ 148.200355] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 148.200383] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 148.200412] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 148.200457] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 148.200492] c0 s5p-ohci s5p-ohci: lost power <7>[ 148.235061] c0 usb 1-2: finish reset-resume <7>[ 148.259067] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 148.259100] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 148.259139] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 148.259175] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 148.259208] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 148.259240] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 148.259280] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 148.259311] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 148.259348] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 148.259384] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 148.259418] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 148.259455] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 148.259492] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 148.259526] c0 s5p-ohci s5p-ohci: restart complete <4>[ 148.259553] c0 usb usb2: root hub lost power or was reset <7>[ 148.259584] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 148.259641] c0 usb usb2: usb resume <7>[ 148.265065] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 148.290152] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 148.290188] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 148.290267] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 148.331807] c0 usb 1-2: read_hsic: <7>[ 148.331967] c0 usb 1-2: link qh8-0001/eab8fd80 start 2 [2/0 us] <6>[ 148.332022] c0 [CHKRA:3]> <7>[ 148.332058] c0 usb 1-2: link qh8-0001/eab8f600 start 3 [2/0 us] <6>[ 148.332111] c0 [CHKRA:5]> <7>[ 148.332144] c0 usb 1-2: link qh8-0001/eab8f080 start 4 [2/0 us] <6>[ 148.332198] c0 [CHKRA:6]> <7>[ 148.332236] c0 usb 1-2: link qh8-0001/eab8fa80 start 5 [2/0 us] <6>[ 148.332288] c0 [CHKRA:7]> <7>[ 148.332321] c0 usb 1-2: link qh8-0001/eab8fe40 start 6 [2/0 us] <6>[ 148.332373] c0 [CHKRA:8]> <6>[ 148.339918] c0 [NACB:3]< <7>[ 148.339939] c0 usb 1-2: serial state: 3 <6>[ 148.339962] c0 notification_available_cb: set lpa handling to false <6>[ 148.340003] c0 [CHKRA:3]> <7>[ 148.345099] c0 hub 2-0:1.0: hub_reset_resume <7>[ 148.345128] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 148.450252] c0 PM: resume of devices complete after 581.483 msecs <6>[ 148.450662] c0 samsung_battery_complete <4>[ 148.450889] c0 Restarting tasks ... <6>[ 148.455060] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 148.455126] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 148.455541] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 148.455593] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 148.455638] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 148.458691] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 148.463964] c0 done. <6>[ 148.464474] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 148.464510] c0 request_active_lock_set <6>[ 148.464544] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:28:56.409408917 UTC) <6>[ 148.480074] c0 mdm_hsic_rpm_check <6>[ 148.480102] c0 mdm_hsic_rpm_restart <7>[ 148.830285] c0 usb 1-2: unlink qh8-0001/eab8fe40 start 6 [2/0 us] <7>[ 148.830591] c0 usb 1-2: unlink qh8-0001/eab8fa80 start 5 [2/0 us] <7>[ 148.830869] c0 usb 1-2: unlink qh8-0001/eab8f080 start 4 [2/0 us] <7>[ 148.838213] c0 usb 1-2: unlink qh8-0001/eab8f600 start 3 [2/0 us] <7>[ 148.846425] c0 usb 1-2: unlink qh8-0001/eab8fd80 start 2 [2/0 us] <6>[ 148.847087] c0 read_hsic_cb: status:-2 actual:0 <7>[ 148.848366] c0 usb 1-2: usb auto-suspend <7>[ 148.860135] c0 hub 1-0:1.0: hub_suspend <7>[ 148.860239] c0 usb usb1: bus auto-suspend <7>[ 148.860319] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 148.860976] c0 request_active_lock_release <6>[ 149.045108] c0 wake lock wlan_rx_wake, expired <6>[ 149.045225] c0 wake lock battery-monitor, expired <6>[ 149.096399] c0 suspend: enter suspend <6>[ 149.096532] c0 suspend: enter suspend, (2013-02-24 17:28:57.041372417 UTC) <6>[ 149.096684] c0 PM: Syncing filesystems ... done. <6>[ 149.113311] c0 mdm_hsic_pm_notify_event: block request <4>[ 149.113341] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 149.130215] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 149.145176] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 149.145438] c0 samsung_battery_prepare <7>[ 149.146953] c0 hub 2-0:1.0: hub_suspend <7>[ 149.146987] c0 usb usb2: bus suspend <7>[ 149.147010] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 149.147059] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 149.147156] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 149.147205] c0 dev rdy val = 1 <6>[ 149.147222] c0 set_host_stat:set host port power status to [0] <6>[ 149.157255] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 149.187202] c0 done <6>[ 149.187221] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 149.191202] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 149.191236] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 149.191432] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 149.191614] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 149.191648] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 149.191835] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 149.191868] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 149.192047] c0 Sound: disabled mclk <7>[ 149.192068] c0 pmu_debug: 0x00000901 <6>[ 149.192087] c0 Sound: state: 0, use_cnt: 0 <7>[ 149.192108] c0 xusbxti_control: 0 <6>[ 149.215354] c0 max77686_rtc_read_time: 113/1/24 17:28:57(0) <6>[ 149.240339] c0 max77686_rtc_stop_alarm: 113/1/24 17:29:1(0) <6>[ 149.290339] c0 max77686_rtc_read_time: 113/1/24 17:28:57(0) <6>[ 149.290370] c0 max77686_rtc_set_alarm: 113/1/24 17:29:1(0) <6>[ 149.315351] c0 max77686_rtc_stop_alarm: 113/1/24 17:29:1(0) <6>[ 149.390339] c0 max77686_rtc_start_alarm: 113/1/24 17:29:1(0) <6>[ 149.440340] c0 max77686_rtc_read_time: 113/1/24 17:28:57(0) <6>[ 149.465350] c0 max77686_rtc_read_time: 113/1/24 17:28:57(0) <6>[ 149.465478] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 149.466088] c0 wake enabled for irq 359 <6>[ 149.466635] c0 max77693_charger_suspend <6>[ 149.467510] c0 wake enabled for irq 365 <6>[ 149.467545] c0 max17047_fuelgauge_suspend <6>[ 149.467569] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4080000), valrt(3350000) <6>[ 149.467608] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 149.468795] c0 wake enabled for irq 375 <6>[ 149.468817] c0 wake enabled for irq 353 <6>[ 149.468844] c0 samsung_battery_suspend <6>[ 149.468905] c0 flite_suspend <6>[ 149.468921] c0 flite_suspend-- <6>[ 149.468939] c0 flite_suspend <6>[ 149.468955] c0 flite_suspend-- <6>[ 149.469010] c0 fimc_suspend <6>[ 149.469026] c0 fimc_suspend-- <6>[ 149.469045] c0 fimc_suspend <6>[ 149.469061] c0 fimc_suspend-- <6>[ 149.469079] c0 fimc_suspend <6>[ 149.469095] c0 fimc_suspend-- <6>[ 149.469113] c0 fimc_suspend <6>[ 149.469128] c0 fimc_suspend-- <6>[ 149.469151] c0 s5p_int_src_ext_hpd() <6>[ 149.469181] c0 FIMC_IS suspend <6>[ 149.469198] c0 FIMC_IS suspend end <6>[ 149.469226] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 149.469258] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 149.469294] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 149.469783] c0 sdhci_suspend_host : MMC Card OFF <6>[ 149.470134] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 149.475085] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 149.475120] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 149.520490] c0 PM: suspend of devices complete after 374.115 msecs <7>[ 149.520521] c0 suspend_enter:148 <4>[ 149.520806] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 149.520837] c0 suspend_set_state: vdd_int range: No configuration <4>[ 149.520866] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 149.520896] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 149.520928] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 149.520961] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 149.520993] c0 suspend_enter:156 <7>[ 149.521704] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 149.521731] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 149.521823] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 149.521849] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 149.521876] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 149.521902] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 149.521930] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 149.521955] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 149.521982] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 149.522008] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 149.522035] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 149.522061] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 149.522151] c0 platform_pm_suspend_noirq: power.0+ <6>[ 149.522175] c0 power_suspend_late return 0 <7>[ 149.522196] c0 platform_pm_suspend_noirq: power.0- <6>[ 149.522224] c0 PM: late suspend of devices complete after 1.210 msecs <7>[ 149.522255] c0 suspend_enter:164 <4>[ 149.522272] c0 Disabling non-boot CPUs ... <7>[ 149.522293] c0 suspend_enter:179 <7>[ 149.522417] c0 suspend_enter:186 <1>[ 149.522729] c0 PM: SLEEP <1>[ 149.522748] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 149.522499] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 149.523525] c0 PM: early resume of devices complete after 0.965 msecs <6>[ 149.523710] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 149.524482] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 149.524748] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 149.524941] c0 s3c2410-wdt: watchdog disabled <6>[ 149.524976] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 149.525647] c0 sdhci_resume_host : MMC Card ON <6>[ 149.684570] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 149.684613] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 149.684655] c0 FIMC_IS resume <6>[ 149.684675] c0 FIMC_IS resume end <6>[ 149.684721] c0 fimc_resume <6>[ 149.684739] c0 fimc_resume-- <6>[ 149.684759] c0 fimc_resume <6>[ 149.684776] c0 fimc_resume-- <6>[ 149.684797] c0 fimc_resume <6>[ 149.684816] c0 fimc_resume-- <6>[ 149.684838] c0 fimc_resume <6>[ 149.684900] c0 fimc_resume-- <6>[ 149.684950] c0 flite_resume <6>[ 149.684967] c0 flite_resume-- <6>[ 149.684987] c0 flite_resume <6>[ 149.685006] c0 flite_resume-- <6>[ 149.686494] c0 samsung_battery_resume <6>[ 149.690083] c0 wake disabled for irq 375 <7>[ 149.690108] c0 [keys]PWR 0 <6>[ 149.690126] c0 wake disabled for irq 353 <6>[ 149.690278] c0 max17047_fuelgauge_resume <6>[ 149.690305] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 149.691458] c0 wake disabled for irq 365 <6>[ 149.695835] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 149.695870] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 149.695913] c0 max77693_charger_resume <6>[ 149.696865] c0 wake disabled for irq 359 <6>[ 149.697055] c0 max77686_irq_thread: irq_src=0x1 <6>[ 149.697358] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 149.697525] c0 max77686_irq_thread: rtc int=0x13 <6>[ 149.697558] c0 max77686-rtc max77686-rtc: max77686_rtc_alarm_irq:irq(464) <6>[ 149.697744] c0 max77686_irq_thread: irq_src=0x0 <6>[ 149.698040] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 149.698422] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 149.700025] c0 max17047_get_soc: SOC(85, 8351 / 9821) <6>[ 149.702174] c0 battery_interval_calulation: v diff(48500), weight(120) <6>[ 149.702216] c0 battery_interval_calulation: weight(120) <6>[ 149.702251] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 149.702312] c0 wakeup wake lock: power-supply <6>[ 149.702351] c0 [11] bat: s(85, 0), v(4082, -48), t(27.0), cs(2, 2), cb(0), cr(0, 0) <6>[ 149.725378] c0 max77686_rtc_read_time: 113/1/24 17:29:1(0) <6>[ 149.750362] c0 max77686_rtc_stop_alarm: 113/1/24 17:29:1(0) <6>[ 149.800361] c0 max77686_rtc_read_time: 113/1/24 17:29:1(0) <6>[ 149.800772] c0 set hsic lpa phy init <6>[ 149.800798] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 149.800962] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 149.801012] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 149.801056] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 149.801088] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 149.801118] c0 usb usb1: root hub lost power or was reset <7>[ 149.801161] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 149.801783] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 149.801852] c0 Sound: enabled mclk <7>[ 149.801876] c0 pmu_debug: 0x00000900 <6>[ 149.811886] c0 Sound: state: 1, use_cnt: 1 <6>[ 149.811917] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 149.811963] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 149.820074] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 149.820113] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 149.820312] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 149.820508] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 149.825065] c0 dev rdy val = 0 <6>[ 149.825088] c0 set_host_stat:set host port power status to [1] <6>[ 149.825126] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 149.885473] c0 done <7>[ 149.900094] c0 usb usb1: usb resume <7>[ 149.900119] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 149.930072] c0 hub 1-0:1.0: hub_reset_resume <7>[ 149.930103] c0 hub 1-0:1.0: enabling power on all ports <7>[ 149.930173] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 149.930221] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 149.930328] c0 mif: usb_port_resume: 1281, 0 <6>[ 149.930381] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 149.930411] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 149.930440] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 149.930488] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 149.930529] c0 s5p-ohci s5p-ohci: lost power <7>[ 149.965068] c0 usb 1-2: finish reset-resume <7>[ 149.989076] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 149.989111] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 149.989156] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 149.989194] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 149.989227] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 149.989263] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 149.989308] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 149.989339] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 149.989377] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 149.989418] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 149.989455] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 149.989493] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 149.989534] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 149.989573] c0 s5p-ohci s5p-ohci: restart complete <4>[ 149.989600] c0 usb usb2: root hub lost power or was reset <7>[ 149.989631] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 149.989691] c0 usb usb2: usb resume <7>[ 149.995076] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 150.020160] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 150.020196] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 150.020280] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 150.057931] c0 usb 1-2: read_hsic: <7>[ 150.058088] c0 usb 1-2: link qh8-0001/eb258dc0 start 7 [2/0 us] <6>[ 150.058142] c0 [CHKRA:3]> <7>[ 150.058179] c0 usb 1-2: link qh8-0001/eb258d80 start 0 [2/0 us] <6>[ 150.058235] c0 [CHKRA:5]> <7>[ 150.058270] c0 usb 1-2: link qh8-0001/eb258d40 start 1 [2/0 us] <6>[ 150.058322] c0 [CHKRA:6]> <7>[ 150.058360] c0 usb 1-2: link qh8-0001/eb258cc0 start 2 [2/0 us] <6>[ 150.058416] c0 [CHKRA:7]> <7>[ 150.058451] c0 usb 1-2: link qh8-0001/eb258c80 start 3 [2/0 us] <6>[ 150.058505] c0 [CHKRA:8]> <6>[ 150.064938] c0 [NACB:3]< <7>[ 150.064959] c0 usb 1-2: serial state: 3 <6>[ 150.064984] c0 notification_available_cb: set lpa handling to false <6>[ 150.065028] c0 [CHKRA:3]> <7>[ 150.075070] c0 hub 2-0:1.0: hub_reset_resume <7>[ 150.075099] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 150.180268] c0 PM: resume of devices complete after 656.511 msecs <6>[ 150.180671] c0 samsung_battery_complete <6>[ 150.180701] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 150.180944] c0 Restarting tasks ... <6>[ 150.185066] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 150.185135] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 150.185554] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 150.185606] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 150.185651] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 150.188710] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 150.193068] c0 done. <6>[ 150.194204] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 150.194242] c0 request_active_lock_set <6>[ 150.194276] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:29:01.489130458 UTC) <6>[ 150.194319] c0 active wake lock mdm_hsic_pm0 <6>[ 150.194346] c0 active wake lock battery-monitor, time left 102 <6>[ 150.194379] c0 active wake lock alarm, time left 973 <6>[ 150.194407] c0 suspend: abort suspend <6>[ 150.210078] c0 mdm_hsic_rpm_check <6>[ 150.210106] c0 mdm_hsic_rpm_restart <7>[ 150.555296] c0 usb 1-2: unlink qh8-0001/eb258c80 start 3 [2/0 us] <7>[ 150.555601] c0 usb 1-2: unlink qh8-0001/eb258cc0 start 2 [2/0 us] <7>[ 150.555879] c0 usb 1-2: unlink qh8-0001/eb258d40 start 1 [2/0 us] <7>[ 150.563224] c0 usb 1-2: unlink qh8-0001/eb258d80 start 0 [2/0 us] <7>[ 150.571592] c0 usb 1-2: unlink qh8-0001/eb258dc0 start 7 [2/0 us] <6>[ 150.572221] c0 read_hsic_cb: status:-2 actual:0 <7>[ 150.573495] c0 usb 1-2: usb auto-suspend <7>[ 150.585141] c0 hub 1-0:1.0: hub_suspend <7>[ 150.585244] c0 usb usb1: bus auto-suspend <7>[ 150.585324] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 150.585980] c0 request_active_lock_release <6>[ 150.700184] c0 wake lock battery-monitor, expired <6>[ 150.745355] c0 suspend: enter suspend <6>[ 150.745454] c0 suspend: enter suspend, (2013-02-24 17:29:02.040297875 UTC) <6>[ 150.745575] c0 PM: Syncing filesystems ... done. <6>[ 150.767794] c0 mdm_hsic_pm_notify_event: block request <4>[ 150.767824] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 150.785222] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 150.800159] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 150.800416] c0 samsung_battery_prepare <6>[ 150.800441] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <7>[ 150.801669] c0 hub 2-0:1.0: hub_suspend <7>[ 150.801703] c0 usb usb2: bus suspend <7>[ 150.801726] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 150.801780] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 150.801880] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 150.801928] c0 dev rdy val = 1 <6>[ 150.801945] c0 set_host_stat:set host port power status to [0] <6>[ 150.811963] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 150.831936] c0 done <6>[ 150.831955] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 150.835957] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 150.835991] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 150.836197] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 150.836390] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 150.836423] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 150.836622] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 150.836654] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 150.836844] c0 Sound: disabled mclk <7>[ 150.836865] c0 pmu_debug: 0x00000901 <6>[ 150.836884] c0 Sound: state: 0, use_cnt: 0 <7>[ 150.836905] c0 xusbxti_control: 0 <6>[ 150.860360] c0 max77686_rtc_read_time: 113/1/24 17:29:2(0) <6>[ 150.885348] c0 max77686_rtc_read_time: 113/1/24 17:29:2(0) <6>[ 150.885378] c0 max77686_rtc_set_alarm: 113/1/24 17:41:37(0) <6>[ 150.910358] c0 max77686_rtc_stop_alarm: 113/1/24 17:29:1(0) <6>[ 150.985357] c0 max77686_rtc_start_alarm: 113/1/24 17:41:37(0) <6>[ 151.035365] c0 max77686_rtc_read_time: 113/1/24 17:29:2(0) <6>[ 151.060370] c0 max77686_rtc_read_time: 113/1/24 17:29:2(0) <6>[ 151.060502] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 151.061109] c0 wake enabled for irq 359 <6>[ 151.061657] c0 max77693_charger_suspend <6>[ 151.062531] c0 wake enabled for irq 365 <6>[ 151.062566] c0 max17047_fuelgauge_suspend <6>[ 151.062590] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4082500), valrt(3350000) <6>[ 151.062630] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 151.063822] c0 wake enabled for irq 375 <6>[ 151.063844] c0 wake enabled for irq 353 <6>[ 151.063872] c0 samsung_battery_suspend <6>[ 151.063932] c0 flite_suspend <6>[ 151.063949] c0 flite_suspend-- <6>[ 151.063967] c0 flite_suspend <6>[ 151.063983] c0 flite_suspend-- <6>[ 151.064038] c0 fimc_suspend <6>[ 151.064054] c0 fimc_suspend-- <6>[ 151.064073] c0 fimc_suspend <6>[ 151.064088] c0 fimc_suspend-- <6>[ 151.064107] c0 fimc_suspend <6>[ 151.064122] c0 fimc_suspend-- <6>[ 151.064140] c0 fimc_suspend <6>[ 151.064155] c0 fimc_suspend-- <6>[ 151.064178] c0 s5p_int_src_ext_hpd() <6>[ 151.064208] c0 FIMC_IS suspend <6>[ 151.064225] c0 FIMC_IS suspend end <6>[ 151.064253] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 151.064284] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 151.064320] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 151.064800] c0 sdhci_suspend_host : MMC Card OFF <6>[ 151.065153] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 151.070106] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 151.070141] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 151.115555] c0 PM: suspend of devices complete after 314.170 msecs <7>[ 151.115586] c0 suspend_enter:148 <4>[ 151.115853] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 151.115884] c0 suspend_set_state: vdd_int range: No configuration <4>[ 151.115914] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 151.115943] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 151.115975] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 151.116008] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 151.116041] c0 suspend_enter:156 <7>[ 151.116760] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 151.116787] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 151.116876] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 151.116902] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 151.116930] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 151.116956] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 151.116984] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 151.117010] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 151.117037] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 151.117063] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 151.117090] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 151.117116] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 151.117207] c0 platform_pm_suspend_noirq: power.0+ <6>[ 151.117231] c0 active wake lock wlan_wake <6>[ 151.117252] c0 active wake lock wlan_rx_wake, time left 183 <6>[ 151.117280] c0 power_suspend_late return -11 <7>[ 151.117301] c0 platform_pm_suspend_noirq: power.0- <3>[ 151.117335] c0 pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x94 returns -11 <3>[ 151.117369] c0 PM: Device power.0 failed to suspend late: error -11 <6>[ 151.118038] c0 PM: early resume of devices complete after 0.635 msecs <6>[ 151.118185] c0 max77686_irq_unmask: group=2, cur=0xfd <3>[ 151.118217] c0 PM: Some devices failed to power down <6>[ 151.118461] c0 s3c2410-wdt: watchdog disabled <6>[ 151.118488] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 151.119018] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 151.119302] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 151.119586] c0 sdhci_resume_host : MMC Card ON <6>[ 151.279494] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 151.279531] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 151.279564] c0 FIMC_IS resume <6>[ 151.279580] c0 FIMC_IS resume end <6>[ 151.279621] c0 fimc_resume <6>[ 151.279637] c0 fimc_resume-- <6>[ 151.279654] c0 fimc_resume <6>[ 151.279669] c0 fimc_resume-- <6>[ 151.279686] c0 fimc_resume <6>[ 151.279701] c0 fimc_resume-- <6>[ 151.279719] c0 fimc_resume <6>[ 151.279767] c0 fimc_resume-- <6>[ 151.279811] c0 flite_resume <6>[ 151.279826] c0 flite_resume-- <6>[ 151.279844] c0 flite_resume <6>[ 151.279859] c0 flite_resume-- <6>[ 151.281287] c0 samsung_battery_resume <6>[ 151.285103] c0 wake disabled for irq 375 <7>[ 151.285125] c0 [keys]PWR 0 <6>[ 151.285141] c0 wake disabled for irq 353 <6>[ 151.285269] c0 max17047_fuelgauge_resume <6>[ 151.285291] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 151.286425] c0 wake disabled for irq 365 <6>[ 151.290804] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 151.290836] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 151.290873] c0 max77693_charger_resume <6>[ 151.291781] c0 wake disabled for irq 359 <6>[ 151.291937] c0 max77686_irq_thread: irq_src=0x0 <6>[ 151.292221] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 151.292537] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 151.293910] c0 max17047_get_soc: SOC(85, 8351 / 9821) <6>[ 151.295912] c0 battery_interval_calulation: v diff(41000), weight(120) <6>[ 151.295944] c0 battery_interval_calulation: weight(120) <6>[ 151.295973] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 151.296017] c0 [12] bat: s(85, 0), v(4090, -41), t(26.2), cs(2, 2), cb(0), cr(0, 0) <6>[ 151.325339] c0 max77686_rtc_read_time: 113/1/24 17:29:3(0) <6>[ 151.362711] c0 set hsic lpa phy init <6>[ 151.362736] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 151.362894] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 151.362937] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 151.362972] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 151.363001] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 151.363029] c0 usb usb1: root hub lost power or was reset <7>[ 151.363064] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 151.363623] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 151.363685] c0 Sound: enabled mclk <7>[ 151.363705] c0 pmu_debug: 0x00000900 <6>[ 151.373707] c0 Sound: state: 1, use_cnt: 1 <6>[ 151.373731] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 151.373771] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 151.380066] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 151.380098] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 151.380283] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 151.380469] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 151.385058] c0 dev rdy val = 0 <6>[ 151.385076] c0 set_host_stat:set host port power status to [1] <6>[ 151.385106] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 151.444983] c0 done <7>[ 151.455075] c0 usb usb1: usb resume <7>[ 151.455097] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 151.485064] c0 hub 1-0:1.0: hub_reset_resume <7>[ 151.485089] c0 hub 1-0:1.0: enabling power on all ports <7>[ 151.485147] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 151.485191] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 151.485283] c0 mif: usb_port_resume: 1281, 0 <6>[ 151.485327] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 151.485352] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 151.485379] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 151.485421] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 151.485455] c0 s5p-ohci s5p-ohci: lost power <7>[ 151.520085] c0 usb 1-2: finish reset-resume <7>[ 151.544069] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 151.544099] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 151.544135] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 151.544169] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 151.544199] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 151.544228] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 151.544265] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 151.544293] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 151.544327] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 151.544360] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 151.544392] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 151.544425] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 151.544459] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 151.544491] c0 s5p-ohci s5p-ohci: restart complete <4>[ 151.544515] c0 usb usb2: root hub lost power or was reset <7>[ 151.544542] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 151.544592] c0 usb usb2: usb resume <7>[ 151.550055] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 151.575126] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 151.575158] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 151.575227] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 151.622652] c0 usb 1-2: read_hsic: <7>[ 151.622785] c0 usb 1-2: link qh8-0001/eb9e3480 start 4 [2/0 us] <6>[ 151.622831] c0 [CHKRA:3]> <7>[ 151.622863] c0 usb 1-2: link qh8-0001/eb258c80 start 5 [2/0 us] <6>[ 151.622909] c0 [CHKRA:5]> <7>[ 151.622938] c0 usb 1-2: link qh8-0001/eb258cc0 start 6 [2/0 us] <6>[ 151.622983] c0 [CHKRA:6]> <7>[ 151.623015] c0 usb 1-2: link qh8-0001/eb258d40 start 7 [2/0 us] <6>[ 151.623061] c0 [CHKRA:7]> <7>[ 151.623089] c0 usb 1-2: link qh8-0001/eb258bc0 start 0 [2/0 us] <6>[ 151.623134] c0 [CHKRA:8]> <6>[ 151.623761] c0 [NACB:3]< <7>[ 151.623779] c0 usb 1-2: serial state: 3 <6>[ 151.623800] c0 notification_available_cb: set lpa handling to false <6>[ 151.623834] c0 [CHKRA:3]> <7>[ 151.630096] c0 hub 2-0:1.0: hub_reset_resume <7>[ 151.630121] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 151.735228] c0 PM: resume of devices complete after 616.981 msecs <6>[ 151.735579] c0 samsung_battery_complete <6>[ 151.735603] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 151.735809] c0 Restarting tasks ... <6>[ 151.740061] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 151.740117] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 151.740487] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 151.740533] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 151.740572] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 151.743139] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 151.748593] c0 done. <6>[ 151.749059] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 151.749090] c0 request_active_lock_set <6>[ 151.749121] c0 suspend: exit suspend, ret = -11 (2013-02-24 17:29:03.448965751 UTC) <6>[ 151.749159] c0 active wake lock mdm_hsic_pm0 <6>[ 151.749183] c0 active wake lock wlan_rx_wake, time left 57 <6>[ 151.749211] c0 active wake lock battery-monitor, time left 110 <6>[ 151.749239] c0 suspend: abort suspend <6>[ 151.765060] c0 mdm_hsic_rpm_check <6>[ 151.765084] c0 mdm_hsic_rpm_restart <7>[ 152.120264] c0 usb 1-2: unlink qh8-0001/eb258bc0 start 0 [2/0 us] <7>[ 152.120516] c0 usb 1-2: unlink qh8-0001/eb258d40 start 7 [2/0 us] <7>[ 152.120748] c0 usb 1-2: unlink qh8-0001/eb258cc0 start 6 [2/0 us] <7>[ 152.127768] c0 usb 1-2: unlink qh8-0001/eb258c80 start 5 [2/0 us] <7>[ 152.135006] c0 usb 1-2: unlink qh8-0001/eb9e3480 start 4 [2/0 us] <6>[ 152.135812] c0 read_hsic_cb: status:-2 actual:0 <7>[ 152.137110] c0 usb 1-2: usb auto-suspend <7>[ 152.150204] c0 hub 1-0:1.0: hub_suspend <7>[ 152.150348] c0 usb usb1: bus auto-suspend <7>[ 152.150457] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 152.151920] c0 request_active_lock_release <4>[ 152.200511] c0 hrtimer: interrupt took 105709 ns <6>[ 152.295108] c0 wake lock battery-monitor, expired <6>[ 152.318698] c0 suspend: enter suspend <6>[ 152.318830] c0 suspend: enter suspend, (2013-02-24 17:29:04.018649239 UTC) <6>[ 152.318983] c0 PM: Syncing filesystems ... done. <6>[ 152.358991] c0 mdm_hsic_pm_notify_event: block request <4>[ 152.359021] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 152.375221] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 152.390175] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 152.390436] c0 samsung_battery_prepare <6>[ 152.390461] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <7>[ 152.391690] c0 hub 2-0:1.0: hub_suspend <7>[ 152.391724] c0 usb usb2: bus suspend <7>[ 152.391747] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 152.391803] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 152.391901] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 152.391949] c0 dev rdy val = 1 <6>[ 152.391966] c0 set_host_stat:set host port power status to [0] <6>[ 152.402000] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 152.431949] c0 done <6>[ 152.431968] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 152.435984] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 152.436018] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 152.436223] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 152.436415] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 152.436449] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 152.436647] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 152.436680] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 152.436870] c0 Sound: disabled mclk <7>[ 152.436891] c0 pmu_debug: 0x00000901 <6>[ 152.436911] c0 Sound: state: 0, use_cnt: 0 <7>[ 152.436932] c0 xusbxti_control: 0 <6>[ 152.460360] c0 max77686_rtc_read_time: 113/1/24 17:29:4(0) <6>[ 152.485359] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 152.535358] c0 max77686_rtc_read_time: 113/1/24 17:29:4(0) <6>[ 152.535389] c0 max77686_rtc_set_alarm: 113/1/24 17:41:37(0) <6>[ 152.560359] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 152.635358] c0 max77686_rtc_start_alarm: 113/1/24 17:41:37(0) <6>[ 152.685357] c0 max77686_rtc_read_time: 113/1/24 17:29:4(0) <6>[ 152.710357] c0 max77686_rtc_read_time: 113/1/24 17:29:4(0) <6>[ 152.710485] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 152.711091] c0 wake enabled for irq 359 <6>[ 152.711640] c0 max77693_charger_suspend <6>[ 152.712515] c0 wake enabled for irq 365 <6>[ 152.712550] c0 max17047_fuelgauge_suspend <6>[ 152.712574] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4090000), valrt(3350000) <6>[ 152.712613] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 152.713802] c0 wake enabled for irq 375 <6>[ 152.713823] c0 wake enabled for irq 353 <6>[ 152.713851] c0 samsung_battery_suspend <6>[ 152.713912] c0 flite_suspend <6>[ 152.713928] c0 flite_suspend-- <6>[ 152.713947] c0 flite_suspend <6>[ 152.713963] c0 flite_suspend-- <6>[ 152.714018] c0 fimc_suspend <6>[ 152.714034] c0 fimc_suspend-- <6>[ 152.714053] c0 fimc_suspend <6>[ 152.714068] c0 fimc_suspend-- <6>[ 152.714087] c0 fimc_suspend <6>[ 152.714102] c0 fimc_suspend-- <6>[ 152.714121] c0 fimc_suspend <6>[ 152.714136] c0 fimc_suspend-- <6>[ 152.714158] c0 s5p_int_src_ext_hpd() <6>[ 152.714190] c0 FIMC_IS suspend <6>[ 152.714206] c0 FIMC_IS suspend end <6>[ 152.714234] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 152.714265] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 152.714302] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 152.714789] c0 sdhci_suspend_host : MMC Card OFF <6>[ 152.715145] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 152.720092] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 152.720127] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 152.765486] c0 PM: suspend of devices complete after 374.075 msecs <7>[ 152.765517] c0 suspend_enter:148 <4>[ 152.765784] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 152.765815] c0 suspend_set_state: vdd_int range: No configuration <4>[ 152.765845] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 152.765875] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 152.765907] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 152.765940] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 152.765973] c0 suspend_enter:156 <7>[ 152.766692] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 152.766719] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 152.766809] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 152.766835] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 152.766863] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 152.766889] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 152.766916] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 152.766942] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 152.766969] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 152.766995] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 152.767022] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 152.767048] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 152.767139] c0 platform_pm_suspend_noirq: power.0+ <6>[ 152.767164] c0 power_suspend_late return 0 <7>[ 152.767185] c0 platform_pm_suspend_noirq: power.0- <6>[ 152.767213] c0 PM: late suspend of devices complete after 1.220 msecs <7>[ 152.767243] c0 suspend_enter:164 <4>[ 152.767261] c0 Disabling non-boot CPUs ... <7>[ 152.767282] c0 suspend_enter:179 <7>[ 152.767407] c0 suspend_enter:186 <1>[ 152.767723] c0 PM: SLEEP <1>[ 152.767742] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 152.767486] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 152.768510] c0 PM: early resume of devices complete after 0.962 msecs <6>[ 152.768673] c0 wakeup wake lock: wlan_wake <6>[ 152.768767] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 152.769514] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 152.769783] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 152.769971] c0 s3c2410-wdt: watchdog disabled <6>[ 152.770003] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 152.770640] c0 sdhci_resume_host : MMC Card ON <6>[ 152.929473] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 152.929515] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 152.929552] c0 FIMC_IS resume <6>[ 152.929569] c0 FIMC_IS resume end <6>[ 152.929616] c0 fimc_resume <6>[ 152.929634] c0 fimc_resume-- <6>[ 152.929654] c0 fimc_resume <6>[ 152.929670] c0 fimc_resume-- <6>[ 152.929689] c0 fimc_resume <6>[ 152.929706] c0 fimc_resume-- <6>[ 152.929725] c0 fimc_resume <6>[ 152.929785] c0 fimc_resume-- <6>[ 152.929835] c0 flite_resume <6>[ 152.929852] c0 flite_resume-- <6>[ 152.929872] c0 flite_resume <6>[ 152.929889] c0 flite_resume-- <6>[ 152.931330] c0 samsung_battery_resume <6>[ 152.935089] c0 wake disabled for irq 375 <7>[ 152.935114] c0 [keys]PWR 0 <6>[ 152.935132] c0 wake disabled for irq 353 <6>[ 152.935284] c0 max17047_fuelgauge_resume <6>[ 152.935309] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 152.936451] c0 wake disabled for irq 365 <6>[ 152.941170] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 152.941206] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 152.941248] c0 max77693_charger_resume <6>[ 152.942196] c0 wake disabled for irq 359 <6>[ 152.944367] c0 max17047_get_soc: SOC(85, 8351 / 9821) <6>[ 152.945080] c0 max77686_irq_thread: irq_src=0x0 <6>[ 152.945376] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 152.945757] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 152.947047] c0 battery_interval_calulation: v diff(37875), weight(120) <6>[ 152.947082] c0 battery_interval_calulation: weight(120) <6>[ 152.947113] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 152.947161] c0 [13] bat: s(85, 0), v(4093, -37), t(27.3), cs(2, 2), cb(0), cr(0, 0) <6>[ 152.980395] c0 max77686_rtc_read_time: 113/1/24 17:29:15(0) <6>[ 152.980797] c0 set hsic lpa phy init <6>[ 152.980824] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 152.980989] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 152.981034] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 152.981073] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 152.981105] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 152.981135] c0 usb usb1: root hub lost power or was reset <7>[ 152.981174] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 152.981790] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 152.981858] c0 Sound: enabled mclk <7>[ 152.981880] c0 pmu_debug: 0x00000900 <6>[ 152.991913] c0 Sound: state: 1, use_cnt: 1 <6>[ 152.991940] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 152.991985] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 153.000190] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 153.000225] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 153.000419] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 153.000613] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 153.005072] c0 dev rdy val = 0 <6>[ 153.005093] c0 set_host_stat:set host port power status to [1] <6>[ 153.005126] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 153.065591] c0 done <7>[ 153.080093] c0 usb usb1: usb resume <7>[ 153.080118] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 153.110077] c0 hub 1-0:1.0: hub_reset_resume <7>[ 153.110106] c0 hub 1-0:1.0: enabling power on all ports <7>[ 153.110173] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 153.110221] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 153.110327] c0 mif: usb_port_resume: 1281, 0 <6>[ 153.110378] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 153.110406] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 153.110435] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 153.110480] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 153.110516] c0 s5p-ohci s5p-ohci: lost power <7>[ 153.145107] c0 usb 1-2: finish reset-resume <7>[ 153.169083] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 153.169117] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 153.169156] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 153.169192] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 153.169225] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 153.169258] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 153.169297] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 153.169328] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 153.169366] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 153.169402] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 153.169436] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 153.169473] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 153.169510] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 153.169544] c0 s5p-ohci s5p-ohci: restart complete <4>[ 153.169570] c0 usb usb2: root hub lost power or was reset <7>[ 153.169601] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 153.169657] c0 usb usb2: usb resume <7>[ 153.175079] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 153.200168] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 153.200204] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 153.200283] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 153.247574] c0 usb 1-2: read_hsic: <7>[ 153.247734] c0 usb 1-2: link qh8-0001/eab8f500 start 1 [2/0 us] <6>[ 153.247788] c0 [CHKRA:3]> <7>[ 153.247823] c0 usb 1-2: link qh8-0001/eab8f200 start 2 [2/0 us] <6>[ 153.247876] c0 [CHKRA:5]> <7>[ 153.247909] c0 usb 1-2: link qh8-0001/eab8f240 start 3 [2/0 us] <6>[ 153.247961] c0 [CHKRA:6]> <7>[ 153.247999] c0 usb 1-2: link qh8-0001/eab8fbc0 start 4 [2/0 us] <6>[ 153.248051] c0 [CHKRA:7]> <7>[ 153.248083] c0 usb 1-2: link qh8-0001/eab8fa80 start 5 [2/0 us] <6>[ 153.248135] c0 [CHKRA:8]> <6>[ 153.254935] c0 [NACB:3]< <7>[ 153.254955] c0 usb 1-2: serial state: 3 <6>[ 153.254978] c0 notification_available_cb: set lpa handling to false <6>[ 153.255018] c0 [CHKRA:3]> <7>[ 153.255103] c0 hub 2-0:1.0: hub_reset_resume <7>[ 153.255130] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 153.360487] c0 PM: resume of devices complete after 591.677 msecs <6>[ 153.360901] c0 samsung_battery_complete <6>[ 153.360928] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 153.361176] c0 Restarting tasks ... <6>[ 153.365072] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 153.365137] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 153.365550] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 153.365603] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 153.365647] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 153.368718] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 153.373917] c0 done. <6>[ 153.380156] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 153.380192] c0 request_active_lock_set <6>[ 153.380226] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:29:15.425076624 UTC) <6>[ 153.380267] c0 active wake lock mdm_hsic_pm0 <6>[ 153.380293] c0 active wake lock wlan_rx_wake, time left 112 <6>[ 153.380325] c0 active wake lock battery-monitor, time left 113 <6>[ 153.380356] c0 suspend: abort suspend <6>[ 153.400090] c0 mdm_hsic_rpm_check <6>[ 153.400117] c0 mdm_hsic_rpm_restart <7>[ 153.745330] c0 usb 1-2: unlink qh8-0001/eab8fa80 start 5 [2/0 us] <7>[ 153.745636] c0 usb 1-2: unlink qh8-0001/eab8fbc0 start 4 [2/0 us] <7>[ 153.745908] c0 usb 1-2: unlink qh8-0001/eab8f240 start 3 [2/0 us] <7>[ 153.757546] c0 usb 1-2: unlink qh8-0001/eab8f200 start 2 [2/0 us] <7>[ 153.770791] c0 usb 1-2: unlink qh8-0001/eab8f500 start 1 [2/0 us] <6>[ 153.771784] c0 read_hsic_cb: status:-2 actual:0 <7>[ 153.773102] c0 usb 1-2: usb auto-suspend <7>[ 153.785220] c0 hub 1-0:1.0: hub_suspend <7>[ 153.785367] c0 usb usb1: bus auto-suspend <7>[ 153.785475] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 153.786017] c0 request_active_lock_release <6>[ 153.945139] c0 wake lock wlan_rx_wake, expired <6>[ 153.945255] c0 wake lock battery-monitor, expired <6>[ 153.970848] c0 suspend: enter suspend <6>[ 153.970980] c0 suspend: enter suspend, (2013-02-24 17:29:16.015807624 UTC) <6>[ 153.971133] c0 PM: Syncing filesystems ... done. <6>[ 154.002855] c0 mdm_hsic_pm_notify_event: block request <4>[ 154.002885] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 154.020236] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 154.035180] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 154.035439] c0 samsung_battery_prepare <6>[ 154.035463] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <7>[ 154.036706] c0 hub 2-0:1.0: hub_suspend <7>[ 154.036740] c0 usb usb2: bus suspend <7>[ 154.036763] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 154.036817] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 154.036917] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 154.036965] c0 dev rdy val = 1 <6>[ 154.036982] c0 set_host_stat:set host port power status to [0] <6>[ 154.047015] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 154.076979] c0 done <6>[ 154.076998] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 154.081000] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 154.081033] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 154.081237] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 154.081429] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 154.081463] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 154.081661] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 154.081694] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 154.081883] c0 Sound: disabled mclk <7>[ 154.081904] c0 pmu_debug: 0x00000901 <6>[ 154.081924] c0 Sound: state: 0, use_cnt: 0 <7>[ 154.081945] c0 xusbxti_control: 0 <6>[ 154.105367] c0 max77686_rtc_read_time: 113/1/24 17:29:16(0) <6>[ 154.130365] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 154.180365] c0 max77686_rtc_read_time: 113/1/24 17:29:16(0) <6>[ 154.180396] c0 max77686_rtc_set_alarm: 113/1/24 17:41:37(0) <6>[ 154.205363] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 154.280364] c0 max77686_rtc_start_alarm: 113/1/24 17:41:37(0) <6>[ 154.330364] c0 max77686_rtc_read_time: 113/1/24 17:29:16(0) <6>[ 154.355366] c0 max77686_rtc_read_time: 113/1/24 17:29:16(0) <6>[ 154.355494] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 154.356102] c0 wake enabled for irq 359 <6>[ 154.356651] c0 max77693_charger_suspend <6>[ 154.357525] c0 wake enabled for irq 365 <6>[ 154.357560] c0 max17047_fuelgauge_suspend <6>[ 154.357584] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4093125), valrt(3350000) <6>[ 154.357623] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 154.358816] c0 wake enabled for irq 375 <6>[ 154.358838] c0 wake enabled for irq 353 <6>[ 154.358865] c0 samsung_battery_suspend <6>[ 154.358924] c0 flite_suspend <6>[ 154.358941] c0 flite_suspend-- <6>[ 154.358959] c0 flite_suspend <6>[ 154.358975] c0 flite_suspend-- <6>[ 154.359030] c0 fimc_suspend <6>[ 154.359047] c0 fimc_suspend-- <6>[ 154.359065] c0 fimc_suspend <6>[ 154.359081] c0 fimc_suspend-- <6>[ 154.359099] c0 fimc_suspend <6>[ 154.359114] c0 fimc_suspend-- <6>[ 154.359133] c0 fimc_suspend <6>[ 154.359148] c0 fimc_suspend-- <6>[ 154.359171] c0 s5p_int_src_ext_hpd() <6>[ 154.359201] c0 FIMC_IS suspend <6>[ 154.359218] c0 FIMC_IS suspend end <6>[ 154.359246] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 154.359277] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 154.359314] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 154.359802] c0 sdhci_suspend_host : MMC Card OFF <6>[ 154.360153] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 154.365099] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 154.365134] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 154.410472] c0 PM: suspend of devices complete after 374.058 msecs <7>[ 154.410503] c0 suspend_enter:148 <4>[ 154.410789] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 154.410820] c0 suspend_set_state: vdd_int range: No configuration <4>[ 154.410850] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 154.410879] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 154.410911] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 154.410944] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 154.410976] c0 suspend_enter:156 <7>[ 154.411690] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 154.411717] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 154.411806] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 154.411832] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 154.411860] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 154.411885] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 154.411912] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 154.411939] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 154.411966] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 154.411992] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 154.412019] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 154.412044] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 154.412137] c0 platform_pm_suspend_noirq: power.0+ <6>[ 154.412162] c0 power_suspend_late return 0 <7>[ 154.412183] c0 platform_pm_suspend_noirq: power.0- <6>[ 154.412211] c0 PM: late suspend of devices complete after 1.214 msecs <7>[ 154.412241] c0 suspend_enter:164 <4>[ 154.412259] c0 Disabling non-boot CPUs ... <7>[ 154.412280] c0 suspend_enter:179 <7>[ 154.412406] c0 suspend_enter:186 <1>[ 154.412723] c0 PM: SLEEP <1>[ 154.412742] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 154.412486] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 154.413509] c0 PM: early resume of devices complete after 0.963 msecs <6>[ 154.413671] c0 wakeup wake lock: wlan_wake <6>[ 154.413769] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 154.414513] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 154.414779] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 154.414969] c0 s3c2410-wdt: watchdog disabled <6>[ 154.415000] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 154.415636] c0 sdhci_resume_host : MMC Card ON <6>[ 154.574490] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 154.574533] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 154.574569] c0 FIMC_IS resume <6>[ 154.574587] c0 FIMC_IS resume end <6>[ 154.574633] c0 fimc_resume <6>[ 154.574650] c0 fimc_resume-- <6>[ 154.574670] c0 fimc_resume <6>[ 154.574686] c0 fimc_resume-- <6>[ 154.574705] c0 fimc_resume <6>[ 154.574722] c0 fimc_resume-- <6>[ 154.574741] c0 fimc_resume <6>[ 154.574801] c0 fimc_resume-- <6>[ 154.574852] c0 flite_resume <6>[ 154.574870] c0 flite_resume-- <6>[ 154.574889] c0 flite_resume <6>[ 154.574906] c0 flite_resume-- <6>[ 154.576348] c0 samsung_battery_resume <6>[ 154.580098] c0 wake disabled for irq 375 <7>[ 154.580123] c0 [keys]PWR 0 <6>[ 154.580141] c0 wake disabled for irq 353 <6>[ 154.580290] c0 max17047_fuelgauge_resume <6>[ 154.580316] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 154.581464] c0 wake disabled for irq 365 <6>[ 154.586141] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 154.586177] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 154.586219] c0 max77693_charger_resume <6>[ 154.587170] c0 wake disabled for irq 359 <6>[ 154.589349] c0 max17047_get_soc: SOC(84, 8340 / 9821) <6>[ 154.590077] c0 max77686_irq_thread: irq_src=0x0 <6>[ 154.590375] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 154.590759] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 154.592017] c0 battery_interval_calulation: v diff(34375), weight(120) <6>[ 154.592053] c0 battery_interval_calulation: temper delta(22), weight(100) <6>[ 154.592104] c0 [14] bat: s(84, -11), v(4095, -34), t(25.1), cs(2, 2), cb(0), cr(0, 0) <6>[ 154.625567] c0 max77686_rtc_read_time: 113/1/24 17:30:51(0) <6>[ 154.625985] c0 set hsic lpa phy init <6>[ 154.626011] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 154.626178] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 154.626222] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 154.626260] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 154.626293] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 154.626322] c0 usb usb1: root hub lost power or was reset <7>[ 154.626362] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 154.626979] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 154.627047] c0 Sound: enabled mclk <7>[ 154.627069] c0 pmu_debug: 0x00000900 <6>[ 154.637103] c0 Sound: state: 1, use_cnt: 1 <6>[ 154.637131] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 154.637177] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 154.645122] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 154.645156] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 154.645352] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 154.645548] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 154.650079] c0 dev rdy val = 0 <6>[ 154.650100] c0 set_host_stat:set host port power status to [1] <6>[ 154.650132] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 154.700733] c0 done <7>[ 154.715101] c0 usb usb1: usb resume <7>[ 154.715126] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 154.745117] c0 hub 1-0:1.0: hub_reset_resume <7>[ 154.745145] c0 hub 1-0:1.0: enabling power on all ports <7>[ 154.745211] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 154.745260] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 154.745364] c0 mif: usb_port_resume: 1281, 0 <6>[ 154.745414] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 154.745442] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 154.745471] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 154.745516] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 154.745551] c0 s5p-ohci s5p-ohci: lost power <7>[ 154.780082] c0 usb 1-2: finish reset-resume <7>[ 154.804077] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 154.804110] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 154.804150] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 154.804186] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 154.804218] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 154.804251] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 154.804290] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 154.804321] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 154.804358] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 154.804394] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 154.804428] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 154.804465] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 154.804502] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 154.804536] c0 s5p-ohci s5p-ohci: restart complete <4>[ 154.804563] c0 usb usb2: root hub lost power or was reset <7>[ 154.804594] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 154.804651] c0 usb usb2: usb resume <7>[ 154.810087] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 154.835106] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 154.835142] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 154.835221] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 154.876387] c0 usb 1-2: read_hsic: <7>[ 154.876547] c0 usb 1-2: link qh8-0001/eb258ac0 start 6 [2/0 us] <6>[ 154.876602] c0 [CHKRA:3]> <7>[ 154.876637] c0 usb 1-2: link qh8-0001/eb258940 start 7 [2/0 us] <6>[ 154.876690] c0 [CHKRA:5]> <7>[ 154.876726] c0 usb 1-2: link qh8-0001/eb659300 start 0 [2/0 us] <6>[ 154.876779] c0 [CHKRA:6]> <7>[ 154.876816] c0 usb 1-2: link qh8-0001/eb659e00 start 1 [2/0 us] <6>[ 154.876868] c0 [CHKRA:7]> <7>[ 154.876901] c0 usb 1-2: link qh8-0001/ebd90900 start 2 [2/0 us] <6>[ 154.876953] c0 [CHKRA:8]> <6>[ 154.881131] c0 [NACB:3]< <7>[ 154.881152] c0 usb 1-2: serial state: 3 <6>[ 154.881175] c0 notification_available_cb: set lpa handling to false <6>[ 154.881215] c0 [CHKRA:3]> <7>[ 154.890127] c0 hub 2-0:1.0: hub_reset_resume <7>[ 154.890155] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 154.995284] c0 PM: resume of devices complete after 581.472 msecs <6>[ 154.995704] c0 samsung_battery_complete <4>[ 154.995942] c0 Restarting tasks ... <6>[ 155.000083] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 155.000147] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 155.000566] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 155.000617] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 155.000662] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 155.003719] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 155.008339] c0 done. <6>[ 155.009019] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 155.009056] c0 request_active_lock_set <6>[ 155.009091] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:30:51.408934498 UTC) <6>[ 155.009133] c0 active wake lock mdm_hsic_pm0 <6>[ 155.009160] c0 active wake lock wlan_rx_wake, time left 116 <6>[ 155.009192] c0 active wake lock battery-monitor, time left 117 <6>[ 155.009223] c0 active wake lock alarm, time left 924 <6>[ 155.009251] c0 suspend: abort suspend <6>[ 155.025089] c0 mdm_hsic_rpm_check <6>[ 155.025115] c0 mdm_hsic_rpm_restart <7>[ 155.375328] c0 usb 1-2: unlink qh8-0001/ebd90900 start 2 [2/0 us] <7>[ 155.375633] c0 usb 1-2: unlink qh8-0001/eb659e00 start 1 [2/0 us] <7>[ 155.375906] c0 usb 1-2: unlink qh8-0001/eb659300 start 0 [2/0 us] <7>[ 155.383296] c0 usb 1-2: unlink qh8-0001/eb258940 start 7 [2/0 us] <7>[ 155.391631] c0 usb 1-2: unlink qh8-0001/eb258ac0 start 6 [2/0 us] <6>[ 155.392292] c0 read_hsic_cb: status:-2 actual:0 <7>[ 155.393443] c0 usb 1-2: usb auto-suspend <7>[ 155.405158] c0 hub 1-0:1.0: hub_suspend <7>[ 155.405263] c0 usb usb1: bus auto-suspend <7>[ 155.405344] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 155.406174] c0 request_active_lock_release <6>[ 155.590113] c0 wake lock wlan_rx_wake, expired <6>[ 155.590206] c0 wake lock battery-monitor, expired <6>[ 155.616103] c0 suspend: enter suspend <6>[ 155.616203] c0 suspend: enter suspend, (2013-02-24 17:30:52.016035168 UTC) <6>[ 155.616325] c0 PM: Syncing filesystems ... done. <6>[ 155.633695] c0 mdm_hsic_pm_notify_event: block request <4>[ 155.633725] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 155.650238] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 155.665186] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 155.665447] c0 samsung_battery_prepare <7>[ 155.666698] c0 hub 2-0:1.0: hub_suspend <7>[ 155.666732] c0 usb usb2: bus suspend <7>[ 155.666755] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 155.666809] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 155.666909] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 155.666957] c0 dev rdy val = 1 <6>[ 155.666974] c0 set_host_stat:set host port power status to [0] <6>[ 155.676993] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 155.706968] c0 done <6>[ 155.706986] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 155.711001] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 155.711034] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 155.711239] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 155.711432] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 155.711466] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 155.711665] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 155.711698] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 155.711888] c0 Sound: disabled mclk <7>[ 155.711909] c0 pmu_debug: 0x00000901 <6>[ 155.711928] c0 Sound: state: 0, use_cnt: 0 <7>[ 155.711949] c0 xusbxti_control: 0 <6>[ 155.735378] c0 max77686_rtc_read_time: 113/1/24 17:30:52(0) <6>[ 155.760374] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 155.810372] c0 max77686_rtc_read_time: 113/1/24 17:30:52(0) <6>[ 155.810402] c0 max77686_rtc_set_alarm: 113/1/24 17:41:37(0) <6>[ 155.835373] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 155.910372] c0 max77686_rtc_start_alarm: 113/1/24 17:41:37(0) <6>[ 155.960374] c0 max77686_rtc_read_time: 113/1/24 17:30:52(0) <6>[ 155.985373] c0 max77686_rtc_read_time: 113/1/24 17:30:53(0) <6>[ 155.985503] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 155.986114] c0 wake enabled for irq 359 <6>[ 155.986662] c0 max77693_charger_suspend <6>[ 155.987540] c0 wake enabled for irq 365 <6>[ 155.987575] c0 max17047_fuelgauge_suspend <6>[ 155.987599] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4095625), valrt(3350000) <6>[ 155.987638] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 155.988827] c0 wake enabled for irq 375 <6>[ 155.988849] c0 wake enabled for irq 353 <6>[ 155.988876] c0 samsung_battery_suspend <6>[ 155.988936] c0 flite_suspend <6>[ 155.988952] c0 flite_suspend-- <6>[ 155.988970] c0 flite_suspend <6>[ 155.988986] c0 flite_suspend-- <6>[ 155.989040] c0 fimc_suspend <6>[ 155.989057] c0 fimc_suspend-- <6>[ 155.989075] c0 fimc_suspend <6>[ 155.989090] c0 fimc_suspend-- <6>[ 155.989109] c0 fimc_suspend <6>[ 155.989124] c0 fimc_suspend-- <6>[ 155.989143] c0 fimc_suspend <6>[ 155.989158] c0 fimc_suspend-- <6>[ 155.989180] c0 s5p_int_src_ext_hpd() <6>[ 155.989211] c0 FIMC_IS suspend <6>[ 155.989227] c0 FIMC_IS suspend end <6>[ 155.989255] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 155.989287] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 155.989324] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 155.989813] c0 sdhci_suspend_host : MMC Card OFF <6>[ 155.990167] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 155.995112] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 155.995147] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 156.040501] c0 PM: suspend of devices complete after 374.096 msecs <7>[ 156.040532] c0 suspend_enter:148 <4>[ 156.040797] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 156.040828] c0 suspend_set_state: vdd_int range: No configuration <4>[ 156.040858] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 156.040887] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 156.040919] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 156.040952] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 156.040984] c0 suspend_enter:156 <7>[ 156.041697] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 156.041724] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 156.041815] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 156.041841] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 156.041868] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 156.041894] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 156.041921] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 156.041947] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 156.041973] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 156.041999] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 156.042026] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 156.042052] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 156.042143] c0 platform_pm_suspend_noirq: power.0+ <6>[ 156.042167] c0 power_suspend_late return 0 <7>[ 156.042188] c0 platform_pm_suspend_noirq: power.0- <6>[ 156.042216] c0 PM: late suspend of devices complete after 1.212 msecs <7>[ 156.042246] c0 suspend_enter:164 <4>[ 156.042264] c0 Disabling non-boot CPUs ... <7>[ 156.042285] c0 suspend_enter:179 <7>[ 156.042412] c0 suspend_enter:186 <1>[ 156.042739] c0 PM: SLEEP <1>[ 156.042758] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 156.042490] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 156.043512] c0 PM: early resume of devices complete after 0.961 msecs <6>[ 156.043674] c0 wakeup wake lock: wlan_wake <6>[ 156.043767] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 156.044513] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 156.044781] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 156.044970] c0 s3c2410-wdt: watchdog disabled <6>[ 156.045001] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 156.045647] c0 sdhci_resume_host : MMC Card ON <6>[ 156.204534] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 156.204576] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 156.204611] c0 FIMC_IS resume <6>[ 156.204629] c0 FIMC_IS resume end <6>[ 156.204676] c0 fimc_resume <6>[ 156.204693] c0 fimc_resume-- <6>[ 156.204713] c0 fimc_resume <6>[ 156.204729] c0 fimc_resume-- <6>[ 156.204749] c0 fimc_resume <6>[ 156.204765] c0 fimc_resume-- <6>[ 156.204784] c0 fimc_resume <6>[ 156.204845] c0 fimc_resume-- <6>[ 156.204896] c0 flite_resume <6>[ 156.204913] c0 flite_resume-- <6>[ 156.204933] c0 flite_resume <6>[ 156.204950] c0 flite_resume-- <6>[ 156.206393] c0 samsung_battery_resume <6>[ 156.210104] c0 wake disabled for irq 375 <7>[ 156.210129] c0 [keys]PWR 0 <6>[ 156.210147] c0 wake disabled for irq 353 <6>[ 156.210295] c0 max17047_fuelgauge_resume <6>[ 156.210320] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 156.211466] c0 wake disabled for irq 365 <6>[ 156.216166] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 156.216200] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 156.216243] c0 max77693_charger_resume <6>[ 156.217194] c0 wake disabled for irq 359 <6>[ 156.219367] c0 max17047_get_soc: SOC(84, 8340 / 9821) <6>[ 156.220084] c0 max77686_irq_thread: irq_src=0x0 <6>[ 156.220381] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 156.220762] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 156.222027] c0 battery_interval_calulation: v diff(31875), weight(120) <6>[ 156.222062] c0 battery_interval_calulation: weight(120) <6>[ 156.222093] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 156.222142] c0 [15] bat: s(84, 0), v(4098, -31), t(25.5), cs(2, 2), cb(0), cr(0, 0) <6>[ 156.255579] c0 max77686_rtc_read_time: 113/1/24 17:31:1(0) <6>[ 156.255993] c0 set hsic lpa phy init <6>[ 156.256019] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 156.256186] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 156.256231] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 156.256270] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 156.256302] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 156.256332] c0 usb usb1: root hub lost power or was reset <7>[ 156.256371] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 156.256988] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 156.257056] c0 Sound: enabled mclk <7>[ 156.257078] c0 pmu_debug: 0x00000900 <6>[ 156.267112] c0 Sound: state: 1, use_cnt: 1 <6>[ 156.267140] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 156.267184] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 156.275098] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 156.275133] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 156.275327] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 156.275522] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 156.280085] c0 dev rdy val = 0 <6>[ 156.280106] c0 set_host_stat:set host port power status to [1] <6>[ 156.280138] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 156.340667] c0 done <7>[ 156.355106] c0 usb usb1: usb resume <7>[ 156.355131] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 156.385092] c0 hub 1-0:1.0: hub_reset_resume <7>[ 156.385121] c0 hub 1-0:1.0: enabling power on all ports <7>[ 156.385187] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 156.385236] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 156.385342] c0 mif: usb_port_resume: 1281, 0 <6>[ 156.385393] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 156.385421] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 156.385451] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 156.385496] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 156.385531] c0 s5p-ohci s5p-ohci: lost power <7>[ 156.420091] c0 usb 1-2: finish reset-resume <7>[ 156.444097] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 156.444130] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 156.444169] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 156.444206] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 156.444239] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 156.444271] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 156.444310] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 156.444341] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 156.444378] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 156.444414] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 156.444449] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 156.444486] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 156.444523] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 156.444559] c0 s5p-ohci s5p-ohci: restart complete <4>[ 156.444591] c0 usb usb2: root hub lost power or was reset <7>[ 156.444624] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 156.444681] c0 usb usb2: usb resume <7>[ 156.450079] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 156.475116] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 156.475156] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 156.475236] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 156.521771] c0 usb 1-2: read_hsic: <7>[ 156.521933] c0 usb 1-2: link qh8-0001/eb258780 start 3 [2/0 us] <6>[ 156.521990] c0 [CHKRA:3]> <7>[ 156.522025] c0 usb 1-2: link qh8-0001/eb258740 start 4 [2/0 us] <6>[ 156.522077] c0 [CHKRA:5]> <7>[ 156.522113] c0 usb 1-2: link qh8-0001/eb258680 start 5 [2/0 us] <6>[ 156.522170] c0 [CHKRA:6]> <7>[ 156.522209] c0 usb 1-2: link qh8-0001/eb2583c0 start 6 [2/0 us] <6>[ 156.522261] c0 [CHKRA:7]> <7>[ 156.522293] c0 usb 1-2: link qh8-0001/eb258540 start 7 [2/0 us] <6>[ 156.522348] c0 [CHKRA:8]> <6>[ 156.524132] c0 [NACB:3]< <7>[ 156.524155] c0 usb 1-2: serial state: 3 <6>[ 156.524179] c0 notification_available_cb: set lpa handling to false <6>[ 156.524219] c0 [CHKRA:3]> <7>[ 156.530131] c0 hub 2-0:1.0: hub_reset_resume <7>[ 156.530162] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 156.635291] c0 PM: resume of devices complete after 591.480 msecs <6>[ 156.635704] c0 samsung_battery_complete <6>[ 156.635732] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 156.635984] c0 Restarting tasks ... <6>[ 156.640089] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 156.640154] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 156.640571] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 156.640627] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 156.640674] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 156.643716] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 156.648538] c0 done. <6>[ 156.649050] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 156.649089] c0 request_active_lock_set <6>[ 156.649123] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:31:01.418960374 UTC) <6>[ 156.649166] c0 active wake lock mdm_hsic_pm0 <6>[ 156.649194] c0 active wake lock PowerManagerService <6>[ 156.649227] c0 active wake lock wlan_rx_wake, time left 114 <6>[ 156.649259] c0 active wake lock battery-monitor, time left 115 <6>[ 156.649291] c0 suspend: abort suspend <6>[ 156.665104] c0 mdm_hsic_rpm_check <6>[ 156.665133] c0 mdm_hsic_rpm_restart <7>[ 157.020443] c0 usb 1-2: unlink qh8-0001/eb258540 start 7 [2/0 us] <7>[ 157.020810] c0 usb 1-2: unlink qh8-0001/eb2583c0 start 6 [2/0 us] <7>[ 157.021152] c0 usb 1-2: unlink qh8-0001/eb258680 start 5 [2/0 us] <7>[ 157.033478] c0 usb 1-2: unlink qh8-0001/eb258740 start 4 [2/0 us] <7>[ 157.047144] c0 usb 1-2: unlink qh8-0001/eb258780 start 3 [2/0 us] <6>[ 157.048105] c0 read_hsic_cb: status:-2 actual:0 <7>[ 157.049581] c0 usb 1-2: usb auto-suspend <7>[ 157.060236] c0 hub 1-0:1.0: hub_suspend <7>[ 157.060397] c0 usb usb1: bus auto-suspend <7>[ 157.060507] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 157.061213] c0 request_active_lock_release <6>[ 157.220134] c0 wake lock wlan_rx_wake, expired <6>[ 157.220268] c0 wake lock battery-monitor, expired <6>[ 157.243976] c0 suspend: enter suspend <6>[ 157.244106] c0 suspend: enter suspend, (2013-02-24 17:31:02.013919834 UTC) <6>[ 157.244258] c0 PM: Syncing filesystems ... done. <6>[ 157.273331] c0 mdm_hsic_pm_notify_event: block request <4>[ 157.273365] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 157.290241] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 157.305194] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 157.305458] c0 samsung_battery_prepare <6>[ 157.305484] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <7>[ 157.306731] c0 hub 2-0:1.0: hub_suspend <7>[ 157.306768] c0 usb usb2: bus suspend <7>[ 157.306793] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 157.306852] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 157.306950] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 157.307001] c0 dev rdy val = 1 <6>[ 157.307021] c0 set_host_stat:set host port power status to [0] <6>[ 157.317042] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 157.347039] c0 done <6>[ 157.347059] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 157.351055] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 157.351093] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 157.351302] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 157.351494] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 157.351531] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 157.351733] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 157.351768] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 157.351958] c0 Sound: disabled mclk <7>[ 157.351980] c0 pmu_debug: 0x00000901 <6>[ 157.352003] c0 Sound: state: 0, use_cnt: 0 <7>[ 157.352027] c0 xusbxti_control: 0 <6>[ 157.375383] c0 max77686_rtc_read_time: 113/1/24 17:31:2(0) <6>[ 157.400368] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 157.450369] c0 max77686_rtc_read_time: 113/1/24 17:31:2(0) <6>[ 157.450405] c0 max77686_rtc_set_alarm: 113/1/24 17:41:37(0) <6>[ 157.475378] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 157.550370] c0 max77686_rtc_start_alarm: 113/1/24 17:41:37(0) <6>[ 157.600369] c0 max77686_rtc_read_time: 113/1/24 17:31:2(0) <6>[ 157.625379] c0 max77686_rtc_read_time: 113/1/24 17:31:2(0) <6>[ 157.625508] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 157.626118] c0 wake enabled for irq 359 <6>[ 157.626667] c0 max77693_charger_suspend <6>[ 157.627545] c0 wake enabled for irq 365 <6>[ 157.627583] c0 max17047_fuelgauge_suspend <6>[ 157.627609] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4098125), valrt(3350000) <6>[ 157.627648] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 157.628839] c0 wake enabled for irq 375 <6>[ 157.628865] c0 wake enabled for irq 353 <6>[ 157.628894] c0 samsung_battery_suspend <6>[ 157.628953] c0 flite_suspend <6>[ 157.628969] c0 flite_suspend-- <6>[ 157.628988] c0 flite_suspend <6>[ 157.629006] c0 flite_suspend-- <6>[ 157.629065] c0 fimc_suspend <6>[ 157.629084] c0 fimc_suspend-- <6>[ 157.629104] c0 fimc_suspend <6>[ 157.629119] c0 fimc_suspend-- <6>[ 157.629138] c0 fimc_suspend <6>[ 157.629153] c0 fimc_suspend-- <6>[ 157.629174] c0 fimc_suspend <6>[ 157.629192] c0 fimc_suspend-- <6>[ 157.629217] c0 s5p_int_src_ext_hpd() <6>[ 157.629250] c0 FIMC_IS suspend <6>[ 157.629266] c0 FIMC_IS suspend end <6>[ 157.629295] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 157.629329] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 157.629371] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 157.629860] c0 sdhci_suspend_host : MMC Card OFF <6>[ 157.630211] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 157.635113] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 157.635153] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 157.680534] c0 PM: suspend of devices complete after 374.097 msecs <7>[ 157.680568] c0 suspend_enter:148 <4>[ 157.680858] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 157.680893] c0 suspend_set_state: vdd_int range: No configuration <4>[ 157.680923] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 157.680955] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 157.680993] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 157.681026] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 157.681060] c0 suspend_enter:156 <7>[ 157.681778] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 157.681810] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 157.681901] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 157.681928] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 157.681955] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 157.681981] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 157.682008] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 157.682033] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 157.682060] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 157.682086] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 157.682113] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 157.682139] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 157.682231] c0 platform_pm_suspend_noirq: power.0+ <6>[ 157.682256] c0 power_suspend_late return 0 <7>[ 157.682277] c0 platform_pm_suspend_noirq: power.0- <6>[ 157.682305] c0 PM: late suspend of devices complete after 1.221 msecs <7>[ 157.682335] c0 suspend_enter:164 <4>[ 157.682353] c0 Disabling non-boot CPUs ... <7>[ 157.682374] c0 suspend_enter:179 <7>[ 157.682498] c0 suspend_enter:186 <1>[ 157.682813] c0 PM: SLEEP <1>[ 157.682832] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x2, 0x0, 0x0, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <7>[ 157.682514] c0 [keys] in the sleep <6>[ 157.682610] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 157.683632] c0 PM: early resume of devices complete after 0.962 msecs <6>[ 157.683811] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 157.684561] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 157.684827] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 157.685017] c0 s3c2410-wdt: watchdog disabled <6>[ 157.685049] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 157.685666] c0 sdhci_resume_host : MMC Card ON <6>[ 157.690129] c0 wakeup wake lock: event1-2381 <6>[ 157.844598] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 157.844641] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 157.844677] c0 FIMC_IS resume <6>[ 157.844695] c0 FIMC_IS resume end <6>[ 157.844741] c0 fimc_resume <6>[ 157.844759] c0 fimc_resume-- <6>[ 157.844778] c0 fimc_resume <6>[ 157.844795] c0 fimc_resume-- <6>[ 157.844813] c0 fimc_resume <6>[ 157.844830] c0 fimc_resume-- <6>[ 157.844848] c0 fimc_resume <6>[ 157.844909] c0 fimc_resume-- <6>[ 157.844959] c0 flite_resume <6>[ 157.844976] c0 flite_resume-- <6>[ 157.844996] c0 flite_resume <6>[ 157.845013] c0 flite_resume-- <6>[ 157.846454] c0 samsung_battery_resume <6>[ 157.850107] c0 wake disabled for irq 375 <7>[ 157.850131] c0 [keys]PWR 0 <6>[ 157.850150] c0 wake disabled for irq 353 <6>[ 157.850299] c0 max17047_fuelgauge_resume <6>[ 157.850325] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 157.851469] c0 wake disabled for irq 365 <6>[ 157.855741] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 157.855776] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 157.855818] c0 max77693_charger_resume <6>[ 157.856764] c0 wake disabled for irq 359 <6>[ 157.858937] c0 max17047_get_soc: SOC(84, 8340 / 9821) <6>[ 157.860088] c0 max77686_irq_thread: irq_src=0x0 <6>[ 157.860384] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 157.860767] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 157.861679] c0 battery_interval_calulation: v diff(46875), weight(120) <6>[ 157.861714] c0 battery_interval_calulation: weight(120) <6>[ 157.861745] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 157.861793] c0 [16] bat: s(84, 0), v(4083, -46), t(25.2), cs(2, 2), cb(0), cr(0, 0) <6>[ 157.895412] c0 max77686_rtc_read_time: 113/1/24 17:31:31(0) <6>[ 157.895809] c0 set hsic lpa phy init <6>[ 157.895835] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 157.896000] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 157.896045] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 157.896083] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 157.896115] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 157.896144] c0 usb usb1: root hub lost power or was reset <7>[ 157.896183] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 157.896800] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 157.896869] c0 Sound: enabled mclk <7>[ 157.896891] c0 pmu_debug: 0x00000900 <6>[ 157.906899] c0 Sound: state: 1, use_cnt: 1 <6>[ 157.906927] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 157.906971] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 157.915102] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 157.915137] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 157.915331] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 157.915525] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 157.920093] c0 dev rdy val = 0 <6>[ 157.920114] c0 set_host_stat:set host port power status to [1] <6>[ 157.920147] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 157.960552] c0 done <7>[ 157.975113] c0 usb usb1: usb resume <7>[ 157.975137] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 158.005098] c0 hub 1-0:1.0: hub_reset_resume <7>[ 158.005126] c0 hub 1-0:1.0: enabling power on all ports <7>[ 158.005193] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 158.005241] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 158.005345] c0 mif: usb_port_resume: 1281, 0 <6>[ 158.005394] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 158.005422] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 158.005451] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 158.005495] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 158.005531] c0 s5p-ohci s5p-ohci: lost power <7>[ 158.040096] c0 usb 1-2: finish reset-resume <7>[ 158.064103] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 158.064136] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 158.064175] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 158.064212] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 158.064244] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 158.064276] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 158.064316] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 158.064346] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 158.064383] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 158.064418] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 158.064453] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 158.064490] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 158.064527] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 158.064561] c0 s5p-ohci s5p-ohci: restart complete <4>[ 158.064588] c0 usb usb2: root hub lost power or was reset <7>[ 158.064619] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 158.064676] c0 usb usb2: usb resume <7>[ 158.070100] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 158.095178] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 158.095213] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 158.095292] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 158.139333] c0 usb 1-2: read_hsic: <7>[ 158.139493] c0 usb 1-2: link qh8-0001/eb258680 start 0 [2/0 us] <6>[ 158.139549] c0 [CHKRA:3]> <7>[ 158.139585] c0 usb 1-2: link qh8-0001/eb258740 start 1 [2/0 us] <6>[ 158.139639] c0 [CHKRA:5]> <7>[ 158.139673] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.139726] c0 [CHKRA:6]> <7>[ 158.139764] c0 usb 1-2: link qh8-0001/eb258780 start 3 [2/0 us] <6>[ 158.139817] c0 [CHKRA:7]> <7>[ 158.139849] c0 usb 1-2: link qh8-0001/eb258ac0 start 4 [2/0 us] <6>[ 158.139902] c0 [CHKRA:8]> <6>[ 158.144952] c0 [NACB:3]< <7>[ 158.144974] c0 usb 1-2: serial state: 3 <6>[ 158.144997] c0 notification_available_cb: set lpa handling to false <6>[ 158.145038] c0 [CHKRA:3]> <7>[ 158.150112] c0 hub 2-0:1.0: hub_reset_resume <7>[ 158.150141] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 158.255282] c0 PM: resume of devices complete after 571.429 msecs <6>[ 158.255685] c0 samsung_battery_complete <6>[ 158.255713] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 158.255957] c0 Restarting tasks ... <6>[ 158.260094] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 158.260159] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 158.260576] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 158.260629] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 158.260673] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 158.263731] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 158.268109] c0 done. <6>[ 158.270000] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 158.270037] c0 request_active_lock_set <6>[ 158.275091] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:31:31.404903542 UTC) <6>[ 158.275134] c0 active wake lock mdm_hsic_pm0 <6>[ 158.275160] c0 active wake lock PowerManagerService <6>[ 158.275190] c0 active wake lock battery-monitor, time left 117 <6>[ 158.275222] c0 suspend: abort suspend <6>[ 158.277994] c0 light_enable_store,new_value=1 <6>[ 158.279204] c0 cm36651_poll_delay_store, poll_delay = 200000000 <6>[ 158.285096] c0 mdm_hsic_rpm_check <6>[ 158.285122] c0 mdm_hsic_rpm_restart <6>[ 158.296220] c0 cm36651_poll_delay_store, poll_delay = 1000000000 <6>[ 158.297640] c0 request_suspend_state: wakeup (3->0) at 158297569375 (2013-02-24 17:31:31.427447083 UTC) <6>[ 158.297729] c0 s3cfb s3cfb.0: +s3cfb_late_resume <6>[ 158.298120] c0 s5p-dsim s5p-dsim.0: +s5p_dsim_late_resume <6>[ 158.304202] c0 lsm330dlc_accel_ioctl: opened = 0, enable = 1 <6>[ 158.304586] c0 lsm330dlc_accel_set_delay: old=66667000ns,new=66667000ns,odr=0x30,opened=1 <6>[ 158.305369] c0 lsm330dlc_accel_set_delay: old=66667000ns,new=200000000ns,odr=0x20,opened=1 <6>[ 158.305876] c0 lsm330dlc_accel_set_delay: old=200000000ns,new=66667000ns,odr=0x30,opened=1 <6>[ 158.308203] c0 lcd_power_on : enable=1 <6>[ 158.406546] c0 s5p-dsim s5p-dsim.0: -s5p_dsim_late_resume <6>[ 158.406757] c0 s3cfb s3cfb.0: fimd sclk rate 400000000, clkdiv 0xffff11 <6>[ 158.406843] c0 s3cfb s3cfb.0: parent clock: 400000000, vclk: 57155000, vclk div: 7 <6>[ 158.406939] c0 mdnie mdnie: mode=0, scenario=0, outdoor=0, cabc=0, CYANOGENMOD <6>[ 158.407043] c0 lcd panel: +s6e8ax0_late_resume <6>[ 158.407094] c0 lcd panel: s6e8ax0_power_on <3>[ 158.407145] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <3>[ 158.407227] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <3>[ 158.407304] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <6>[ 158.525196] c0 Write: 01 13 00 00 0c 01 00 07 00 01 00 07 00 01 04 00 <6>[ 158.538969] c0 [NACB:6]< <6>[ 158.539011] c0 [NRA:6]> <7>[ 158.539072] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.540567] c0 [RACB:6]< <7>[ 158.540623] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.540671] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.540733] c0 [CHKRA:6]> <6>[ 158.540787] c0 Read: 01 1a 00 80 0c 01 02 07 00 01 00 0e 00 02 04 00 <6>[ 158.541275] c0 Write: 01 b5 00 00 03 01 00 2f 00 50 00 a9 00 10 0f 00 <6>[ 158.546968] c0 [NACB:6]< <6>[ 158.547011] c0 [NRA:6]> <7>[ 158.547078] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.548815] c0 [RACB:6]< <7>[ 158.548875] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.548920] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.548980] c0 [CHKRA:6]> <6>[ 158.549042] c0 Read: 01 38 00 80 0c 01 04 00 00 0c 00 2c 00 13 13 00 <6>[ 158.554970] c0 [NACB:6]< <6>[ 158.555011] c0 [NRA:6]> <7>[ 158.555072] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.556311] c0 [RACB:6]< <7>[ 158.556362] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.556405] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.556462] c0 [CHKRA:6]> <6>[ 158.556516] c0 Read: 01 13 00 80 03 01 02 2f 00 50 00 07 00 02 04 00 <6>[ 158.556872] c0 Write: 01 10 00 00 03 01 00 30 00 02 00 04 00 12 01 00 <6>[ 158.570968] c0 [NACB:6]< <6>[ 158.571011] c0 [NRA:6]> <7>[ 158.571072] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.572316] c0 [RACB:6]< <7>[ 158.572364] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.572406] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.572460] c0 [CHKRA:6]> <6>[ 158.572514] c0 Read: 01 13 00 80 03 01 02 30 00 02 00 07 00 02 04 00 <6>[ 158.572896] c0 Write: 01 3c 00 00 03 01 00 31 00 03 00 30 00 10 01 00 <6>[ 158.586974] c0 [NACB:6]< <6>[ 158.587017] c0 [NRA:6]> <7>[ 158.587080] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.588318] c0 [RACB:6]< <7>[ 158.588373] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.588418] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.588481] c0 [CHKRA:6]> <6>[ 158.588540] c0 Read: 01 13 00 80 03 01 02 31 00 03 00 07 00 02 04 00 <6>[ 158.588972] c0 Write: 01 0c 00 00 03 01 00 32 00 4d 00 00 00 <6>[ 158.590418] c0 lcd panel: brightness=0, bl=0, candela=20 <6>[ 158.590464] c0 lcd panel: -s6e8ax0_late_resume <6>[ 158.590497] c0 s3cfb s3cfb.0: -s3cfb_late_resume <6>[ 158.590532] c0 sii9234_late_resume() <6>[ 158.590603] c0 graphics fb0: lcdfreq_late_resume <4>[ 158.590644] c0 dhd_late_resume: enter <6>[ 158.602954] c0 [NACB:6]< <6>[ 158.602995] c0 [NRA:6]> <7>[ 158.603056] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <5>[ 158.603173] c0 melfas-ts 3-0048: mms_ts_resume: users=1 <7>[ 158.603218] c0 [TSP] melfas_power on <6>[ 158.604560] c0 [RACB:6]< <7>[ 158.604600] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.604641] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.604698] c0 [CHKRA:6]> <6>[ 158.604747] c0 Read: 01 6f 00 80 03 01 02 32 00 4d 00 63 00 02 04 00 <6>[ 158.605452] c0 Write: 01 0c 00 00 03 01 00 33 00 4f 00 00 00 <6>[ 158.609514] c0 lcd panel: brightness=40, bl=2, candela=40 <3>[ 158.609709] c0 [TouchKey] touchkey is not enabled. 233 <7>[ 158.609754] c0 [Touchkey] error to write i2c <6>[ 158.618966] c0 [NACB:6]< <6>[ 158.619016] c0 [NRA:6]> <7>[ 158.619086] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.620317] c0 [RACB:6]< <7>[ 158.620369] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.620418] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.620485] c0 [CHKRA:6]> <6>[ 158.620567] c0 Read: 01 1c 00 80 03 01 02 33 00 4f 00 10 00 02 04 00 <6>[ 158.620980] c0 Write: 01 0c 00 00 03 01 00 34 00 52 00 00 00 <6>[ 158.634965] c0 [NACB:6]< <6>[ 158.635010] c0 [NRA:6]> <7>[ 158.635080] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.636312] c0 [RACB:6]< <7>[ 158.636363] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.636413] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.636477] c0 [CHKRA:6]> <6>[ 158.636532] c0 Read: 01 17 00 80 03 01 02 34 00 52 00 0b 00 02 04 00 <6>[ 158.648854] c0 Write: 01 0c 00 00 03 01 00 35 00 39 00 00 00 <6>[ 158.658953] c0 [NACB:6]< <6>[ 158.658989] c0 [NRA:6]> <7>[ 158.659044] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.660311] c0 [RACB:6]< <7>[ 158.660351] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.660387] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.660436] c0 [CHKRA:6]> <6>[ 158.660482] c0 Read: 01 1f 00 80 03 01 02 35 00 39 00 13 00 02 04 00 <6>[ 158.669256] c0 Write: 01 0c 00 00 03 01 00 36 00 39 00 00 00 <6>[ 158.682953] c0 [NACB:6]< <6>[ 158.682991] c0 [NRA:6]> <7>[ 158.683045] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.684306] c0 [RACB:6]< <7>[ 158.684349] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 158.684384] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 158.684432] c0 [CHKRA:6]> <6>[ 158.684496] c0 Read: 01 1f 00 80 03 01 02 36 00 39 00 13 00 02 04 00 <5>[ 158.725109] c0 melfas-ts 3-0048: TA disconnect!!! <7>[ 158.725283] c0 [TouchKey] sec_touchkey_late_resume <6>[ 158.725322] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3) <7>[ 158.780950] c0 [TouchKey] data[0]=8 data[1]=6 data[2]=5 data[3]=0 <7>[ 158.886177] c0 [Touchkey] autocal Enabled <7>[ 158.886570] c0 [Touchkey] LED returned on <3>[ 159.045130] c0 [HOTPLUG IN] check_up 500000>=500000 && 261>100 <3>[ 159.045194] c0 CPU_UP 3 <4>[ 159.063566] c3 CPU3: Booted secondary processor <6>[ 159.063635] c3 notifier_call_chain : NOTIFY BAD tick_notify <6>[ 159.065090] c3 Switched to NOHz mode on CPU #3 <5>[ 159.112587] c0 melfas-ts 3-0048: finger [0] down, palm 0 <6>[ 159.123603] c0 [VIB] haptic_work: pwm_config duty=27787 <7>[ 159.180162] c0 usb 1-2: unlink qh8-0001/eb258ac0 start 4 [2/0 us] <7>[ 159.180295] c0 usb 1-2: unlink qh8-0001/eb258780 start 3 [2/0 us] <7>[ 159.180419] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <7>[ 159.186979] c0 usb 1-2: unlink qh8-0001/eb258740 start 1 [2/0 us] <7>[ 159.193482] c0 usb 1-2: unlink qh8-0001/eb258680 start 0 [2/0 us] <6>[ 159.193952] c0 read_hsic_cb: status:-2 actual:0 <7>[ 159.194953] c0 usb 1-2: usb auto-suspend <7>[ 159.205119] c0 hub 1-0:1.0: hub_suspend <7>[ 159.205160] c0 usb usb1: bus auto-suspend <7>[ 159.205188] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 159.205973] c0 request_active_lock_release <7>[ 159.270102] c0 s5p-ohci s5p-ohci: auto-stop root hub <7>[ 159.310109] c0 [TSP] change_dvfs_lock <5>[ 159.326666] c0 melfas-ts 3-0048: finger [0] up, palm 0 <6>[ 159.332571] c0 [VIB] haptic_work: pwm_config duty=27787 <6>[ 159.366237] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params ++ <6>[ 159.366287] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 159.366331] c0 wm8994-codec wm8994-codec: m3_wm1811_aif1_hw_params -- <6>[ 159.366826] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000 <6>[ 159.368776] c0 wm8994-codec wm8994-codec: write 3d = 2f <6>[ 159.368987] c0 wm8994-codec wm8994-codec: write 3e = 27 <6>[ 159.369210] c0 wm8994-codec wm8994-codec: write 1 = 300 <6>[ 159.369408] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 159.369608] c0 wm8994-codec wm8994-codec: write 38 = 80 <6>[ 159.369807] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 159.370001] c0 wm8994-codec wm8994-codec: write 39 = 1ee <6>[ 159.370224] c0 wm8994-codec wm8994-codec: write 1 = 303 <6>[ 159.425132] c0 wm8994-codec wm8994-codec: write 39 = 18c <6>[ 159.425342] c0 wm8994-codec wm8994-codec: write 2 = 6000 <6>[ 159.425532] c0 wm8994-codec wm8994-codec: write 208 = 1a <6>[ 159.426989] c0 wm8994-codec wm8994-codec: write 5 = 303 <6>[ 159.427200] c0 wm8994-codec wm8994-codec: write 3 = 3f30 <6>[ 159.427408] c0 wm8994-codec wm8994-codec: write 3 = 3ff0 <6>[ 159.427614] c0 wm8994-codec wm8994-codec: write 4c = 9f25 <6>[ 159.435136] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 159.435337] c0 wm8994-codec wm8994-codec: write 54 = 33 <6>[ 159.495549] c0 wm8994-codec wm8994-codec: write 59 = d6e0 <6>[ 159.495746] c0 wm8994-codec wm8994-codec: write 54 = f <6>[ 159.505329] c0 wm8994-codec wm8994-codec: write 60 = 1ee <6>[ 159.505528] c0 wm8994-codec wm8994-codec: write 1 = 1303 <6>[ 159.505745] c0 wm8994-codec wm8994-codec: write 3 = 33f0 <6>[ 159.505940] c0 wm8994-codec wm8994-codec: write 15 = 0 <6>[ 159.506142] c0 wm8994-codec wm8994-codec: write 420 = 0 <7>[ 159.506363] c0 i2s_txctrl:Turn on <3>[ 159.520142] c0 [HOTPLUG IN] check_up 900000>=500000 && 203>200 <3>[ 159.520744] c0 CPU_UP 1 <4>[ 159.522858] c1 CPU1: Booted secondary processor <6>[ 159.522978] c1 notifier_call_chain : NOTIFY BAD tick_notify <6>[ 159.525037] c1 Switched to NOHz mode on CPU #1 <6>[ 160.298175] c0 cm36651_work_func_light, red = 3 green = 3 blue = 3 white = 3 <7>[ 160.525204] c0 hub 2-0:1.0: hub_suspend <7>[ 160.525285] c0 usb usb2: bus auto-suspend <7>[ 160.525342] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 160.525443] c0 s5p-ohci s5p-ohci: host_phy_susp:4 <7>[ 162.510209] c0 i2s_txctrl: Turn Off - spr is no active <6>[ 162.510379] c0 wm8994-codec wm8994-codec: write 420 = 200 <6>[ 162.510681] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 162.510751] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 163.512818] c0 wm8994-codec wm8994-codec: write 60 = 122 <6>[ 163.513107] c0 wm8994-codec wm8994-codec: write 60 = 100 <6>[ 163.513364] c0 wm8994-codec wm8994-codec: write 54 = 0 <6>[ 163.513619] c0 wm8994-codec wm8994-codec: write 1 = 1003 <6>[ 163.513877] c0 wm8994-codec wm8994-codec: write 1 = 3 <6>[ 163.514133] c0 wm8994-codec wm8994-codec: write 3 = 3f0 <6>[ 163.514406] c0 wm8994-codec wm8994-codec: write 3 = 330 <6>[ 163.514667] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 163.515566] c0 wm8994-codec wm8994-codec: write 5 = 300 <6>[ 163.521294] c0 wm8994-codec wm8994-codec: write 4c = 1f25 <6>[ 163.522137] c0 wm8994-codec wm8994-codec: write 3 = 3000 <6>[ 163.522407] c0 wm8994-codec wm8994-codec: write 3 = 3c00 <6>[ 163.522660] c0 wm8994-codec wm8994-codec: write 39 = 18f <6>[ 163.522923] c0 wm8994-codec wm8994-codec: write 37 = 81 <6>[ 163.523180] c0 wm8994-codec wm8994-codec: write 38 = b0 <6>[ 163.659442] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 163.659560] c1 mdm_hsic_rpm_check <6>[ 163.659617] c1 request_active_lock_set <7>[ 163.659779] c1 usb usb1: usb auto-resume <7>[ 163.659829] c1 s5p-ehci s5p-ehci: resume root hub <6>[ 163.675149] c0 wm8994-codec wm8994-codec: write 3 = 0 <6>[ 163.675429] c0 wm8994-codec wm8994-codec: write 37 = 80 <6>[ 163.675695] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 163.675957] c0 wm8994-codec wm8994-codec: write 1 = 0 <6>[ 163.676225] c0 wm8994-codec wm8994-codec: write 2 = 2000 <6>[ 163.676485] c0 wm8994-codec wm8994-codec: write 208 = a <6>[ 163.676805] c0 wm8994-codec wm8994-codec: write 15 = 40 <6>[ 163.677071] c0 wm8994-codec wm8994-codec: write 3d = 3f <6>[ 163.677337] c0 wm8994-codec wm8994-codec: write 3e = 37 <6>[ 163.696367] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 163.710153] c1 hub 1-0:1.0: hub_resume <7>[ 163.710266] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 163.710361] c1 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 163.710484] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 163.710575] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <6>[ 163.710648] c1 mif: usb_port_resume: 1283, 4 <7>[ 163.710694] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 163.710794] c1 usb 1-2: finish resume <6>[ 163.713319] c0 usb 1-2: read_hsic: <7>[ 163.715219] c0 s5p-ehci s5p-ehci: reused qh eb258680 schedule <7>[ 163.715288] c0 usb 1-2: link qh8-0001/eb258680 start 0 [2/0 us] <6>[ 163.715385] c0 [CHKRA:3]> <7>[ 163.715454] c0 s5p-ehci s5p-ehci: reused qh eb258740 schedule <7>[ 163.715517] c0 usb 1-2: link qh8-0001/eb258740 start 1 [2/0 us] <6>[ 163.715613] c0 [CHKRA:5]> <7>[ 163.715665] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 163.715727] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 163.715848] c0 [CHKRA:6]> <7>[ 163.717490] c0 s5p-ehci s5p-ehci: reused qh eb258780 schedule <7>[ 163.717562] c0 usb 1-2: link qh8-0001/eb258780 start 3 [2/0 us] <6>[ 163.717679] c0 [CHKRA:7]> <7>[ 163.717785] c0 s5p-ehci s5p-ehci: reused qh eb258ac0 schedule <7>[ 163.717854] c0 usb 1-2: link qh8-0001/eb258ac0 start 4 [2/0 us] <6>[ 163.717986] c0 [CHKRA:8]> <6>[ 163.721033] c0 [NACB:6]< <6>[ 163.721107] c0 [NRA:6]> <7>[ 163.721188] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 163.722408] c0 [RACB:6]< <7>[ 163.722483] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 163.722545] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 163.722641] c0 [CHKRA:6]> <6>[ 163.722736] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 163.724010] c0 Write: 01 0c 00 00 03 01 00 37 00 4f 00 00 00 <7>[ 163.735190] c0 hub 1-0:1.0: resume on port 2, status 0 <7>[ 163.735252] c0 hub 1-0:1.0: port 2, status 0503, change 0004, 480 Mb/s <6>[ 163.737038] c0 [NACB:6]< <6>[ 163.737112] c0 [NRA:6]> <7>[ 163.737198] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 163.738409] c0 [RACB:6]< <7>[ 163.738479] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 163.738542] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 163.738637] c0 [CHKRA:6]> <6>[ 163.738716] c0 Read: 01 1c 00 80 03 01 02 37 00 4f 00 10 00 02 04 00 <7>[ 164.235280] c0 usb 1-2: unlink qh8-0001/eb258ac0 start 4 [2/0 us] <7>[ 164.235463] c0 usb 1-2: unlink qh8-0001/eb258780 start 3 [2/0 us] <7>[ 164.235630] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <7>[ 164.242140] c0 usb 1-2: unlink qh8-0001/eb258740 start 1 [2/0 us] <7>[ 164.249504] c0 usb 1-2: unlink qh8-0001/eb258680 start 0 [2/0 us] <6>[ 164.250363] c0 read_hsic_cb: status:-2 actual:0 <7>[ 164.251603] c0 usb 1-2: usb auto-suspend <7>[ 164.265221] c0 hub 1-0:1.0: hub_suspend <7>[ 164.265292] c0 usb usb1: bus auto-suspend <7>[ 164.265341] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 164.266067] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 164.266119] c0 request_active_lock_release <6>[ 166.006683] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 166.006780] c0 mdm_hsic_rpm_check <6>[ 166.006829] c0 request_active_lock_set <7>[ 166.006981] c0 usb usb1: usb auto-resume <7>[ 166.007027] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 166.046280] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 166.060187] c0 hub 1-0:1.0: hub_resume <7>[ 166.060287] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 166.060374] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 166.060493] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 166.060580] c0 mif: usb_port_resume: 1283, 4 <7>[ 166.060637] c0 usb 1-2: finish resume <7>[ 166.060743] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 166.060823] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 166.063136] c0 usb 1-2: read_hsic: <7>[ 166.063640] c0 s5p-ehci s5p-ehci: reused qh eb258680 schedule <7>[ 166.063706] c0 usb 1-2: link qh8-0001/eb258680 start 0 [2/0 us] <6>[ 166.063802] c0 [CHKRA:3]> <7>[ 166.063858] c0 s5p-ehci s5p-ehci: reused qh eb258740 schedule <7>[ 166.063921] c0 usb 1-2: link qh8-0001/eb258740 start 1 [2/0 us] <6>[ 166.064014] c0 [CHKRA:5]> <7>[ 166.064067] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 166.064130] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 166.064223] c0 [CHKRA:6]> <7>[ 166.066795] c0 s5p-ehci s5p-ehci: reused qh eb258780 schedule <7>[ 166.066861] c0 usb 1-2: link qh8-0001/eb258780 start 3 [2/0 us] <6>[ 166.066956] c0 [CHKRA:7]> <7>[ 166.067045] c0 s5p-ehci s5p-ehci: reused qh eb258ac0 schedule <7>[ 166.067109] c0 usb 1-2: link qh8-0001/eb258ac0 start 4 [2/0 us] <6>[ 166.067202] c0 [CHKRA:8]> <6>[ 166.070165] c0 [NACB:6]< <6>[ 166.070235] c0 [NRA:6]> <7>[ 166.070322] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 166.071606] c0 [RACB:6]< <7>[ 166.071684] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 166.071748] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 166.071842] c0 [CHKRA:6]> <6>[ 166.071924] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 166.073067] c0 Write: 01 0c 00 00 03 01 00 38 00 4f 00 00 00 <6>[ 166.086252] c0 [NACB:6]< <6>[ 166.086327] c0 [NRA:6]> <7>[ 166.086416] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 166.087605] c0 [RACB:6]< <7>[ 166.087676] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 166.087740] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 166.087836] c0 [CHKRA:6]> <6>[ 166.087933] c0 Read: 01 1c 00 80 03 01 02 38 00 4f 00 10 00 02 04 00 <7>[ 166.585291] c0 usb 1-2: unlink qh8-0001/eb258ac0 start 4 [2/0 us] <7>[ 166.585477] c0 usb 1-2: unlink qh8-0001/eb258780 start 3 [2/0 us] <7>[ 166.585643] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <7>[ 166.592190] c0 usb 1-2: unlink qh8-0001/eb258740 start 1 [2/0 us] <7>[ 166.599334] c0 usb 1-2: unlink qh8-0001/eb258680 start 0 [2/0 us] <6>[ 166.600234] c0 read_hsic_cb: status:-2 actual:0 <7>[ 166.601541] c0 usb 1-2: usb auto-suspend <7>[ 166.615180] c0 hub 1-0:1.0: hub_suspend <7>[ 166.615250] c0 usb usb1: bus auto-suspend <7>[ 166.615298] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 166.616285] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 166.616336] c0 request_active_lock_release <6>[ 168.625225] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 168.625322] c0 mdm_hsic_rpm_check <6>[ 168.625371] c0 request_active_lock_set <7>[ 168.625521] c0 usb usb1: usb auto-resume <7>[ 168.625569] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 168.665952] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 168.680149] c0 hub 1-0:1.0: hub_resume <7>[ 168.680249] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 168.680338] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 168.680453] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 168.680540] c0 mif: usb_port_resume: 1283, 4 <7>[ 168.680595] c0 usb 1-2: finish resume <7>[ 168.680692] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 168.680770] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 168.683673] c0 usb 1-2: read_hsic: <7>[ 168.684173] c0 s5p-ehci s5p-ehci: reused qh eb258680 schedule <7>[ 168.684238] c0 usb 1-2: link qh8-0001/eb258680 start 0 [2/0 us] <6>[ 168.684334] c0 [CHKRA:3]> <7>[ 168.684391] c0 s5p-ehci s5p-ehci: reused qh eb258740 schedule <7>[ 168.684455] c0 usb 1-2: link qh8-0001/eb258740 start 1 [2/0 us] <6>[ 168.684549] c0 [CHKRA:5]> <7>[ 168.684602] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 168.684663] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.684756] c0 [CHKRA:6]> <7>[ 168.686262] c3 s5p-ehci s5p-ehci: reused qh eb258780 schedule <7>[ 168.686336] c3 usb 1-2: link qh8-0001/eb258780 start 3 [2/0 us] <6>[ 168.686438] c3 [CHKRA:7]> <7>[ 168.686560] c3 s5p-ehci s5p-ehci: reused qh eb258ac0 schedule <7>[ 168.686624] c3 usb 1-2: link qh8-0001/eb258ac0 start 4 [2/0 us] <6>[ 168.686721] c3 [CHKRA:8]> <6>[ 168.687785] c0 [NACB:6]< <6>[ 168.687853] c0 [NRA:6]> <7>[ 168.687940] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.689271] c0 [RACB:6]< <7>[ 168.689346] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 168.689409] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.689504] c0 [CHKRA:6]> <6>[ 168.689584] c0 Read: 01 68 00 80 03 01 04 00 00 4e 00 5c 00 10 02 00 <6>[ 168.695790] c0 [NACB:6]< <6>[ 168.695880] c0 [NRA:6]> <7>[ 168.695975] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.697059] c0 [RACB:6]< <7>[ 168.697163] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 168.697241] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.697366] c0 [CHKRA:6]> <6>[ 168.697481] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 168.699060] c0 Write: 01 0c 00 00 03 01 00 39 00 4f 00 00 00 <6>[ 168.700263] c0 Write: 01 0c 00 00 03 01 00 3a 00 39 00 00 00 <6>[ 168.711793] c0 [NACB:6]< <6>[ 168.711891] c0 [NRA:6]> <7>[ 168.712000] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.713175] c0 [RACB:6]< <7>[ 168.713264] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 168.713333] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.713431] c0 [CHKRA:6]> <6>[ 168.713519] c0 Read: 01 1c 00 80 03 01 02 39 00 4f 00 10 00 02 04 00 <6>[ 168.719826] c0 [NACB:6]< <6>[ 168.719926] c0 [NRA:6]> <7>[ 168.720034] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.721172] c0 [RACB:6]< <7>[ 168.721290] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 168.721372] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.721480] c0 [CHKRA:6]> <6>[ 168.721588] c0 Read: 01 1f 00 80 03 01 02 3a 00 39 00 13 00 02 04 00 <6>[ 168.745182] c0 Write: 01 0c 00 00 03 01 00 3b 00 43 00 00 00 <6>[ 168.759791] c0 [NACB:6]< <6>[ 168.759883] c0 [NRA:6]> <7>[ 168.759976] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.761424] c0 [RACB:6]< <7>[ 168.761515] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 168.761586] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 168.761692] c0 [CHKRA:6]> <6>[ 168.761809] c0 Read: 01 61 00 80 03 01 02 3b 00 43 00 55 00 02 04 00 <7>[ 169.260243] c3 usb 1-2: unlink qh8-0001/eb258ac0 start 4 [2/0 us] <7>[ 169.260437] c3 usb 1-2: unlink qh8-0001/eb258780 start 3 [2/0 us] <7>[ 169.260613] c3 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <7>[ 169.267102] c3 usb 1-2: unlink qh8-0001/eb258740 start 1 [2/0 us] <7>[ 169.273979] c3 usb 1-2: unlink qh8-0001/eb258680 start 0 [2/0 us] <6>[ 169.274709] c0 read_hsic_cb: status:-2 actual:0 <7>[ 169.275688] c3 usb 1-2: usb auto-suspend <7>[ 169.290182] c3 hub 1-0:1.0: hub_suspend <7>[ 169.290249] c3 usb usb1: bus auto-suspend <7>[ 169.290295] c3 s5p-ehci s5p-ehci: suspend root hub <6>[ 169.290801] c3 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 169.290852] c3 request_active_lock_release <6>[ 183.378366] c0 lcd panel: brightness=38, bl=1, candela=30 <3>[ 183.411700] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <6>[ 183.428557] c0 lcd panel: brightness=28, bl=0, candela=20 <6>[ 189.334832] c0 light_enable_store,new_value=0 <6>[ 190.021071] c0 request_suspend_state: sleep (0->3) at 190020979975 (2013-02-24 17:32:03.150856225 UTC) <7>[ 190.021240] c0 [TouchKey] sec_touchkey_early_suspend <5>[ 190.021935] c0 melfas-ts 3-0048: mms_ts_suspend: users=1 <7>[ 190.022008] c0 [TSP] release_all_fingers <7>[ 190.022137] c0 [TSP] dvfs_lock free. <7>[ 190.022177] c0 <7>[ 190.022217] c0 [TSP] melfas_power off <6>[ 190.062746] c0 lsm330dlc_accel_ioctl: opened = 1, enable = 0 <4>[ 190.075138] c0 dhd_early_suspend: enter <4>[ 190.075197] c0 dhd_set_suspend: force extra Suspend setting <6>[ 190.090721] c0 graphics fb0: lcdfreq_early_suspend <4>[ 190.090773] c0 s3cfb_extdsp_early_suspend is called <6>[ 190.090819] c0 sii9234_early_suspend() <6>[ 190.090860] c0 +s3cfb_early_suspend <6>[ 190.090902] c0 lcd panel: +s6e8ax0_early_suspend <6>[ 190.090965] c0 lcd panel: s6e8ax0_power_off <6>[ 190.235215] c0 lcd panel: -s6e8ax0_early_suspend <6>[ 190.246430] c0 s5p-dsim s5p-dsim.0: +s5p_dsim_early_suspend <6>[ 190.246472] c0 lcd_power_on : enable=0 <6>[ 190.246921] c0 s5p-dsim s5p-dsim.0: -s5p_dsim_early_suspend <7>[ 190.246958] c0 s3cfb - disable power domain <6>[ 190.247186] c0 -s3cfb_early_suspend <3>[ 190.247219] c0 CPU_DOWN 1 <6>[ 190.247317] c0 active wake lock PowerManagerService.Broadcasts <6>[ 190.247360] c1 sync_system + <5>[ 190.253520] c0 CPU1: shutdown <3>[ 190.255281] c0 CPU_DOWN 3 <6>[ 190.257165] c0 Write: 01 13 00 00 0c 01 00 08 00 01 00 07 00 01 04 00 <6>[ 190.257229] c0 request_active_lock_set <7>[ 190.257363] c0 usb usb1: usb auto-resume <7>[ 190.257395] c0 s5p-ehci s5p-ehci: resume root hub <5>[ 190.262881] c0 CPU3: shutdown <6>[ 190.272316] c0 sync_system - <7>[ 190.310104] c0 hub 1-0:1.0: hub_resume <7>[ 190.310159] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 190.310214] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 190.310275] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 190.310329] c0 mif: usb_port_resume: 1283, 4 <7>[ 190.310361] c0 usb 1-2: finish resume <7>[ 190.310411] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 190.310454] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 190.313703] c0 usb 1-2: read_hsic: <7>[ 190.313816] c0 s5p-ehci s5p-ehci: reused qh eb258680 schedule <7>[ 190.313856] c0 usb 1-2: link qh8-0001/eb258680 start 0 [2/0 us] <6>[ 190.313910] c0 [CHKRA:3]> <7>[ 190.313939] c0 s5p-ehci s5p-ehci: reused qh eb258740 schedule <7>[ 190.313979] c0 usb 1-2: link qh8-0001/eb258740 start 1 [2/0 us] <6>[ 190.314032] c0 [CHKRA:5]> <7>[ 190.314061] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 190.314100] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.314153] c0 [CHKRA:6]> <7>[ 190.314184] c0 s5p-ehci s5p-ehci: reused qh eb258780 schedule <7>[ 190.314223] c0 usb 1-2: link qh8-0001/eb258780 start 3 [2/0 us] <6>[ 190.314276] c0 [CHKRA:7]> <7>[ 190.314303] c0 s5p-ehci s5p-ehci: reused qh eb258ac0 schedule <7>[ 190.314343] c0 usb 1-2: link qh8-0001/eb258ac0 start 4 [2/0 us] <6>[ 190.314397] c0 [CHKRA:8]> <6>[ 190.326579] c0 [NACB:6]< <6>[ 190.326619] c0 [NRA:6]> <7>[ 190.326682] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.329314] c0 [RACB:6]< <7>[ 190.329361] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 190.329406] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.329467] c0 [CHKRA:6]> <6>[ 190.329526] c0 Read: 01 1a 00 80 0c 01 02 08 00 01 00 0e 00 02 04 00 <6>[ 190.330000] c0 Write: 01 b5 00 00 03 01 00 3c 00 50 00 a9 00 10 0f 00 <6>[ 190.334576] c0 [NACB:6]< <6>[ 190.334611] c0 [NRA:6]> <7>[ 190.334669] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.336065] c0 [RACB:6]< <7>[ 190.336106] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 190.336152] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.336211] c0 [CHKRA:6]> <6>[ 190.336264] c0 Read: 01 13 00 80 03 01 02 3c 00 50 00 07 00 02 04 00 <6>[ 190.336540] c0 Write: 01 10 00 00 03 01 00 3d 00 02 00 04 00 12 01 00 <6>[ 190.350580] c0 [NACB:6]< <6>[ 190.350616] c0 [NRA:6]> <7>[ 190.350674] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.352063] c0 [RACB:6]< <7>[ 190.352100] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 190.352145] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.352204] c0 [CHKRA:6]> <6>[ 190.352243] c0 Read: 01 13 00 80 03 01 02 3d 00 02 00 07 00 02 04 00 <6>[ 190.352529] c0 Write: 01 3c 00 00 03 01 00 3e 00 03 00 30 00 10 01 00 <6>[ 190.366596] c0 [NACB:6]< <6>[ 190.366645] c0 [NRA:6]> <7>[ 190.366729] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.368065] c0 [RACB:6]< <7>[ 190.368114] c0 s5p-ehci s5p-ehci: reused qh eb258e40 schedule <7>[ 190.368177] c0 usb 1-2: link qh8-0001/eb258e40 start 2 [2/0 us] <6>[ 190.368261] c0 [CHKRA:6]> <6>[ 190.368318] c0 Read: 01 13 00 80 03 01 02 3e 00 03 00 07 00 02 04 00 <7>[ 190.865373] c0 usb 1-2: unlink qh8-0001/eb258ac0 start 4 [2/0 us] <7>[ 190.865739] c0 usb 1-2: unlink qh8-0001/eb258780 start 3 [2/0 us] <7>[ 190.866077] c0 usb 1-2: unlink qh8-0001/eb258e40 start 2 [2/0 us] <7>[ 190.878944] c0 usb 1-2: unlink qh8-0001/eb258740 start 1 [2/0 us] <7>[ 190.892320] c0 usb 1-2: unlink qh8-0001/eb258680 start 0 [2/0 us] <6>[ 190.893298] c0 read_hsic_cb: status:-2 actual:0 <7>[ 190.894767] c0 usb 1-2: usb auto-suspend <7>[ 190.905228] c0 hub 1-0:1.0: hub_suspend <7>[ 190.905373] c0 usb usb1: bus auto-suspend <7>[ 190.905478] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 190.906660] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 190.906783] c0 request_active_lock_release <6>[ 190.941001] c0 suspend: enter suspend <6>[ 190.941134] c0 suspend: enter suspend, (2013-02-24 17:32:04.070924266 UTC) <6>[ 190.941286] c0 PM: Syncing filesystems ... done. <6>[ 190.962324] c0 mdm_hsic_pm_notify_event: block request <4>[ 190.962354] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 190.975262] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 190.990204] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 190.990462] c0 samsung_battery_prepare <6>[ 190.990487] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <6>[ 190.992012] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 190.992110] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 190.992158] c0 dev rdy val = 1 <6>[ 190.992176] c0 set_host_stat:set host port power status to [0] <6>[ 191.002199] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 191.022192] c0 done <6>[ 191.022211] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 191.026203] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 191.026236] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 191.026442] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 191.026635] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 191.026669] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 191.026867] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 191.026900] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 191.027090] c0 Sound: disabled mclk <7>[ 191.027111] c0 pmu_debug: 0x00000901 <6>[ 191.027131] c0 Sound: state: 0, use_cnt: 0 <7>[ 191.027152] c0 xusbxti_control: 0 <6>[ 191.050382] c0 max77686_rtc_read_time: 113/1/24 17:32:5(0) <6>[ 191.075388] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 191.125388] c0 max77686_rtc_read_time: 113/1/24 17:32:5(0) <6>[ 191.125418] c0 max77686_rtc_set_alarm: 113/1/24 17:32:9(0) <6>[ 191.150388] c0 max77686_rtc_stop_alarm: 113/1/24 17:41:37(0) <6>[ 191.225387] c0 max77686_rtc_start_alarm: 113/1/24 17:32:9(0) <6>[ 191.275387] c0 max77686_rtc_read_time: 113/1/24 17:32:5(0) <6>[ 191.300388] c0 max77686_rtc_read_time: 113/1/24 17:32:5(0) <6>[ 191.300516] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 191.301122] c0 wake enabled for irq 359 <6>[ 191.301672] c0 max77693_charger_suspend <6>[ 191.302550] c0 wake enabled for irq 365 <6>[ 191.302585] c0 max17047_fuelgauge_suspend <6>[ 191.302609] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4083125), valrt(3350000) <6>[ 191.302648] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 191.303840] c0 wake enabled for irq 375 <6>[ 191.303861] c0 wake enabled for irq 353 <6>[ 191.303889] c0 samsung_battery_suspend <6>[ 191.303949] c0 flite_suspend <6>[ 191.303966] c0 flite_suspend-- <6>[ 191.303985] c0 flite_suspend <6>[ 191.304000] c0 flite_suspend-- <6>[ 191.304055] c0 fimc_suspend <6>[ 191.304072] c0 fimc_suspend-- <6>[ 191.304091] c0 fimc_suspend <6>[ 191.304106] c0 fimc_suspend-- <6>[ 191.304125] c0 fimc_suspend <6>[ 191.304140] c0 fimc_suspend-- <6>[ 191.304158] c0 fimc_suspend <6>[ 191.304173] c0 fimc_suspend-- <6>[ 191.304196] c0 s5p_int_src_ext_hpd() <6>[ 191.304227] c0 FIMC_IS suspend <6>[ 191.304243] c0 FIMC_IS suspend end <6>[ 191.304269] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 191.304305] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 191.304341] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 191.304372] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 191.304409] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 191.304901] c0 sdhci_suspend_host : MMC Card OFF <6>[ 191.305256] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 191.310130] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 191.310165] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 191.355572] c0 PM: suspend of devices complete after 364.153 msecs <7>[ 191.355602] c0 suspend_enter:148 <4>[ 191.355869] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 191.355900] c0 suspend_set_state: vdd_int range: No configuration <4>[ 191.355930] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 191.355959] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 191.355992] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 191.356024] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 191.356057] c0 suspend_enter:156 <7>[ 191.356768] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 191.356794] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 191.356885] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 191.356911] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 191.356938] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 191.356964] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 191.356992] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 191.357018] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 191.357045] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 191.357071] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 191.357098] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 191.357124] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 191.357215] c0 platform_pm_suspend_noirq: power.0+ <6>[ 191.357240] c0 power_suspend_late return 0 <7>[ 191.357261] c0 platform_pm_suspend_noirq: power.0- <6>[ 191.357289] c0 PM: late suspend of devices complete after 1.211 msecs <7>[ 191.357319] c0 suspend_enter:164 <4>[ 191.357337] c0 Disabling non-boot CPUs ... <7>[ 191.357359] c0 suspend_enter:179 <7>[ 191.357484] c0 suspend_enter:186 <1>[ 191.357813] c0 PM: SLEEP <1>[ 191.357832] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x2, 0x0, 0x0, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <7>[ 191.357500] c0 [keys] in the sleep <6>[ 191.357596] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 191.358618] c0 PM: early resume of devices complete after 0.962 msecs <6>[ 191.358796] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 191.359560] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 191.359827] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 191.360016] c0 s3c2410-wdt: watchdog disabled <6>[ 191.360048] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 191.360691] c0 sdhci_resume_host : MMC Card ON <6>[ 191.365136] c0 wakeup wake lock: event1-2381 <6>[ 191.519605] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 191.519647] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 191.519683] c0 FIMC_IS resume <6>[ 191.519700] c0 FIMC_IS resume end <6>[ 191.519747] c0 fimc_resume <6>[ 191.519765] c0 fimc_resume-- <6>[ 191.519784] c0 fimc_resume <6>[ 191.519801] c0 fimc_resume-- <6>[ 191.519819] c0 fimc_resume <6>[ 191.519836] c0 fimc_resume-- <6>[ 191.519855] c0 fimc_resume <6>[ 191.519915] c0 fimc_resume-- <6>[ 191.519966] c0 flite_resume <6>[ 191.519983] c0 flite_resume-- <6>[ 191.520003] c0 flite_resume <6>[ 191.520019] c0 flite_resume-- <6>[ 191.521459] c0 samsung_battery_resume <6>[ 191.525115] c0 wake disabled for irq 375 <7>[ 191.525139] c0 [keys]PWR 0 <6>[ 191.525158] c0 wake disabled for irq 353 <6>[ 191.525308] c0 max17047_fuelgauge_resume <6>[ 191.525334] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 191.526480] c0 wake disabled for irq 365 <6>[ 191.530751] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 191.530785] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 191.530827] c0 max77693_charger_resume <6>[ 191.531771] c0 wake disabled for irq 359 <6>[ 191.533938] c0 max17047_get_soc: SOC(84, 8329 / 9821) <6>[ 191.535096] c0 max77686_irq_thread: irq_src=0x0 <6>[ 191.535392] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 191.535774] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 191.536574] c0 battery_interval_calulation: v diff(44000), weight(120) <6>[ 191.536609] c0 battery_interval_calulation: weight(120) <6>[ 191.536640] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 191.536684] c0 [17] bat: s(84, -11), v(4085, -44), t(26.0), cs(2, 2), cb(0), cr(0, 0) <6>[ 191.570410] c0 max77686_rtc_read_time: 113/1/24 17:32:6(0) <6>[ 191.570807] c0 set hsic lpa phy init <6>[ 191.570834] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 191.570998] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 191.571043] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 191.571081] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 191.571113] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 191.571142] c0 usb usb1: root hub lost power or was reset <7>[ 191.571182] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 191.571799] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 191.571866] c0 Sound: enabled mclk <7>[ 191.571888] c0 pmu_debug: 0x00000900 <6>[ 191.581894] c0 Sound: state: 1, use_cnt: 1 <6>[ 191.581921] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 191.581966] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 191.590108] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 191.590143] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 191.590337] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 191.590531] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 191.595099] c0 dev rdy val = 0 <6>[ 191.595121] c0 set_host_stat:set host port power status to [1] <6>[ 191.595154] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 191.655501] c0 done <7>[ 191.670119] c0 usb usb1: usb resume <7>[ 191.670144] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 191.700106] c0 hub 1-0:1.0: hub_reset_resume <7>[ 191.700134] c0 hub 1-0:1.0: enabling power on all ports <7>[ 191.700201] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 191.700250] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 191.700352] c0 mif: usb_port_resume: 1281, 0 <6>[ 191.700418] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 191.700446] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 191.700475] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 191.700520] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 191.700556] c0 s5p-ohci s5p-ohci: lost power <7>[ 191.735104] c0 usb 1-2: finish reset-resume <7>[ 191.759112] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 191.759145] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 191.759184] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 191.759221] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 191.759254] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 191.759286] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 191.759326] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 191.759356] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 191.759393] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 191.759429] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 191.759464] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 191.759501] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 191.759537] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 191.759571] c0 s5p-ohci s5p-ohci: restart complete <4>[ 191.759598] c0 usb usb2: root hub lost power or was reset <7>[ 191.759629] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 191.759685] c0 usb usb2: usb resume <7>[ 191.765094] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 191.790177] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 191.790212] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 191.790292] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 191.836707] c0 usb 1-2: read_hsic: <7>[ 191.836865] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 191.836919] c0 [CHKRA:3]> <7>[ 191.836954] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 191.837007] c0 [CHKRA:5]> <7>[ 191.837041] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 191.837093] c0 [CHKRA:6]> <7>[ 191.837130] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 191.837184] c0 [CHKRA:7]> <7>[ 191.837216] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 191.837268] c0 [CHKRA:8]> <6>[ 191.840949] c0 [NACB:3]< <7>[ 191.840971] c0 usb 1-2: serial state: 3 <6>[ 191.840995] c0 notification_available_cb: set lpa handling to false <6>[ 191.841035] c0 [CHKRA:3]> <7>[ 191.845112] c0 hub 2-0:1.0: hub_reset_resume <7>[ 191.845140] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 191.950511] c0 PM: resume of devices complete after 591.673 msecs <6>[ 191.950916] c0 samsung_battery_complete <6>[ 191.950943] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 191.951179] c0 Restarting tasks ... <6>[ 191.955101] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 191.955166] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 191.955583] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 191.955635] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 191.955679] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 191.958741] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 191.968074] c0 done. <6>[ 191.971414] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 191.971452] c0 request_active_lock_set <6>[ 191.971486] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:32:06.426309160 UTC) <6>[ 191.984185] c0 light_enable_store,new_value=1 <6>[ 191.985429] c0 cm36651_poll_delay_store, poll_delay = 200000000 <6>[ 191.986394] c0 cm36651_poll_delay_store, poll_delay = 1000000000 <6>[ 191.990135] c0 mdm_hsic_rpm_check <6>[ 191.990163] c0 mdm_hsic_rpm_restart <6>[ 192.015017] c0 request_suspend_state: wakeup (3->0) at 192014937389 (2013-02-24 17:32:06.469831663 UTC) <6>[ 192.018870] c0 s3cfb s3cfb.0: +s3cfb_late_resume <6>[ 192.019261] c0 s5p-dsim s5p-dsim.0: +s5p_dsim_late_resume <6>[ 192.025563] c0 lsm330dlc_accel_ioctl: opened = 0, enable = 1 <6>[ 192.026441] c0 lsm330dlc_accel_set_delay: old=66667000ns,new=66667000ns,odr=0x30,opened=1 <6>[ 192.026963] c0 lsm330dlc_accel_set_delay: old=66667000ns,new=200000000ns,odr=0x20,opened=1 <6>[ 192.027446] c0 lsm330dlc_accel_set_delay: old=200000000ns,new=66667000ns,odr=0x30,opened=1 <6>[ 192.029337] c0 lcd_power_on : enable=1 <6>[ 192.126856] c0 s5p-dsim s5p-dsim.0: -s5p_dsim_late_resume <6>[ 192.127218] c0 s3cfb s3cfb.0: fimd sclk rate 400000000, clkdiv 0xffff11 <6>[ 192.127353] c0 s3cfb s3cfb.0: parent clock: 400000000, vclk: 57155000, vclk div: 7 <6>[ 192.127511] c0 mdnie mdnie: mode=0, scenario=0, outdoor=0, cabc=0, CYANOGENMOD <6>[ 192.127676] c0 lcd panel: +s6e8ax0_late_resume <6>[ 192.127758] c0 lcd panel: s6e8ax0_power_on <3>[ 192.127837] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <3>[ 192.127965] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <3>[ 192.128090] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded <6>[ 192.193726] c0 Write: 01 13 00 00 0c 01 00 09 00 01 00 07 00 01 04 00 <6>[ 192.202943] c0 [NACB:6]< <6>[ 192.202972] c0 [NRA:6]> <7>[ 192.203020] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.204553] c0 [RACB:6]< <7>[ 192.204585] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.204615] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.204660] c0 [CHKRA:6]> <6>[ 192.204697] c0 Read: 01 1a 00 80 0c 01 02 09 00 01 00 0e 00 02 04 00 <6>[ 192.205042] c0 Write: 01 b5 00 00 03 01 00 3f 00 50 00 a9 00 10 0f 00 <6>[ 192.210951] c0 [NACB:6]< <6>[ 192.210980] c0 [NRA:6]> <7>[ 192.211026] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.212433] c0 [RACB:6]< <7>[ 192.212475] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.212507] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.212551] c0 [CHKRA:6]> <6>[ 192.212602] c0 Read: 01 38 00 80 0c 01 04 00 00 0c 00 2c 00 13 13 00 <6>[ 192.218956] c0 [NACB:6]< <6>[ 192.218986] c0 [NRA:6]> <7>[ 192.219032] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.220308] c0 [RACB:6]< <7>[ 192.220342] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.220373] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.220417] c0 [CHKRA:6]> <6>[ 192.220455] c0 Read: 01 13 00 80 03 01 02 3f 00 50 00 07 00 02 04 00 <6>[ 192.220734] c0 Write: 01 10 00 00 03 01 00 40 00 02 00 04 00 12 01 00 <6>[ 192.226938] c0 [NACB:6]< <6>[ 192.226964] c0 [NRA:6]> <7>[ 192.227007] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.228305] c0 [RACB:6]< <7>[ 192.228339] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.228370] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.228413] c0 [CHKRA:6]> <6>[ 192.228445] c0 Read: 01 13 00 80 03 01 02 40 00 02 00 07 00 02 04 00 <6>[ 192.228697] c0 Write: 01 3c 00 00 03 01 00 41 00 03 00 30 00 10 01 00 <6>[ 192.234946] c0 [NACB:6]< <6>[ 192.234975] c0 [NRA:6]> <7>[ 192.235020] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.236311] c0 [RACB:6]< <7>[ 192.236353] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.236389] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.236437] c0 [CHKRA:6]> <6>[ 192.236480] c0 Read: 01 13 00 80 03 01 02 41 00 03 00 07 00 02 04 00 <6>[ 192.236759] c0 Write: 01 0c 00 00 03 01 00 42 00 4d 00 00 00 <6>[ 192.242949] c0 [NACB:6]< <6>[ 192.242980] c0 [NRA:6]> <7>[ 192.243027] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.244431] c0 [RACB:6]< <7>[ 192.244465] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.244498] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.244546] c0 [CHKRA:6]> <6>[ 192.244585] c0 Read: 01 6f 00 80 03 01 02 42 00 4d 00 63 00 02 04 00 <6>[ 192.245138] c0 Write: 01 0c 00 00 03 01 00 43 00 4f 00 00 00 <6>[ 192.250946] c0 [NACB:6]< <6>[ 192.250982] c0 [NRA:6]> <7>[ 192.251041] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.252429] c0 [RACB:6]< <7>[ 192.252462] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.252502] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.252563] c0 [CHKRA:6]> <6>[ 192.252606] c0 Read: 01 1c 00 80 03 01 02 43 00 4f 00 10 00 02 04 00 <6>[ 192.252855] c0 Write: 01 0c 00 00 03 01 00 44 00 52 00 00 00 <6>[ 192.258968] c0 [NACB:6]< <6>[ 192.259011] c0 [NRA:6]> <7>[ 192.259082] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.260435] c0 [RACB:6]< <7>[ 192.260478] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.260519] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.260577] c0 [CHKRA:6]> <6>[ 192.260627] c0 Read: 01 17 00 80 03 01 02 44 00 52 00 0b 00 02 04 00 <6>[ 192.268505] c0 Write: 01 0c 00 00 03 01 00 45 00 39 00 00 00 <6>[ 192.274964] c0 [NACB:6]< <6>[ 192.275008] c0 [NRA:6]> <7>[ 192.275074] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.276320] c0 [RACB:6]< <7>[ 192.276377] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.276424] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.276487] c0 [CHKRA:6]> <6>[ 192.276549] c0 Read: 01 1f 00 80 03 01 02 45 00 39 00 13 00 02 04 00 <6>[ 192.286249] c0 Write: 01 0c 00 00 03 01 00 46 00 39 00 00 00 <6>[ 192.290960] c0 [NACB:6]< <6>[ 192.291002] c0 [NRA:6]> <7>[ 192.291069] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.292438] c0 [RACB:6]< <7>[ 192.292493] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 192.292546] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 192.292608] c0 [CHKRA:6]> <6>[ 192.292661] c0 Read: 01 1f 00 80 03 01 02 46 00 39 00 13 00 02 04 00 <6>[ 192.311044] c0 lcd panel: brightness=0, bl=0, candela=20 <6>[ 192.311106] c0 lcd panel: -s6e8ax0_late_resume <6>[ 192.311149] c0 s3cfb s3cfb.0: -s3cfb_late_resume <6>[ 192.311189] c0 sii9234_late_resume() <6>[ 192.311226] c0 graphics fb0: lcdfreq_late_resume <4>[ 192.311282] c0 dhd_late_resume: enter <5>[ 192.323183] c0 melfas-ts 3-0048: mms_ts_resume: users=1 <7>[ 192.323231] c0 [TSP] melfas_power on <6>[ 192.330191] c0 lcd panel: brightness=40, bl=2, candela=40 <3>[ 192.330416] c0 [TouchKey] touchkey is not enabled. 233 <7>[ 192.330479] c0 [Touchkey] error to write i2c <5>[ 192.445187] c0 melfas-ts 3-0048: TA disconnect!!! <7>[ 192.445473] c0 [TouchKey] sec_touchkey_late_resume <6>[ 192.445555] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3) <7>[ 192.501698] c0 [TouchKey] data[0]=8 data[1]=6 data[2]=5 data[3]=0 <7>[ 192.606380] c0 [Touchkey] autocal Enabled <7>[ 192.606862] c0 [Touchkey] LED returned on <7>[ 192.607796] c0 [Touchkey] keycode_type err <7>[ 192.790256] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 192.790439] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 192.790607] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 192.797039] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 192.804173] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 192.804727] c0 read_hsic_cb: status:-2 actual:0 <7>[ 192.805763] c0 usb 1-2: usb auto-suspend <7>[ 192.820185] c0 hub 1-0:1.0: hub_suspend <7>[ 192.820253] c0 usb usb1: bus auto-suspend <7>[ 192.820299] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 192.820983] c0 request_active_lock_release <7>[ 193.020132] c0 s5p-ohci s5p-ohci: auto-stop root hub <6>[ 193.656570] c0 max77686_irq_thread: irq_src=0x1 <6>[ 193.656950] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 193.657165] c0 max77686_irq_thread: rtc int=0x13 <6>[ 193.657225] c0 max77686-rtc max77686-rtc: max77686_rtc_alarm_irq:irq(464) <6>[ 193.680553] c0 max77686_rtc_read_time: 113/1/24 17:32:9(0) <6>[ 193.705524] c0 max77686_rtc_stop_alarm: 113/1/24 17:32:9(0) <6>[ 193.988208] c0 cm36651_work_func_light, red = 3 green = 3 blue = 3 white = 3 <7>[ 194.530194] c0 hub 2-0:1.0: hub_suspend <7>[ 194.530268] c0 usb usb2: bus auto-suspend <7>[ 194.530318] c0 s5p-ohci s5p-ohci: suspend root hub <6>[ 194.530433] c0 s5p-ohci s5p-ohci: host_phy_susp:4 <6>[ 195.389368] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 195.389466] c0 mdm_hsic_rpm_check <6>[ 195.389520] c0 request_active_lock_set <7>[ 195.389680] c0 usb usb1: usb auto-resume <7>[ 195.389735] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 195.426358] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 195.440177] c0 hub 1-0:1.0: hub_resume <7>[ 195.440284] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 195.440387] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 195.440512] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 195.440603] c0 mif: usb_port_resume: 1283, 4 <7>[ 195.440666] c0 usb 1-2: finish resume <7>[ 195.440773] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 195.440860] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 195.443092] c0 usb 1-2: read_hsic: <7>[ 195.443390] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 195.443466] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 195.443571] c0 [CHKRA:3]> <7>[ 195.443629] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 195.443697] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 195.443803] c0 [CHKRA:5]> <7>[ 195.443862] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 195.443928] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 195.444028] c0 [CHKRA:6]> <7>[ 195.446066] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 195.446144] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 195.446249] c0 [CHKRA:7]> <7>[ 195.446340] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 195.446410] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 195.446516] c0 [CHKRA:8]> <6>[ 195.451967] c0 [NACB:6]< <6>[ 195.452048] c0 [NRA:6]> <7>[ 195.452160] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 195.453328] c0 [RACB:6]< <7>[ 195.453443] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 195.453531] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 195.453652] c0 [CHKRA:6]> <6>[ 195.453757] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 195.455345] c0 Write: 01 0c 00 00 03 01 00 47 00 4f 00 00 00 <6>[ 195.467983] c0 [NACB:6]< <6>[ 195.468070] c0 [NRA:6]> <7>[ 195.468192] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 195.469322] c0 [RACB:6]< <7>[ 195.469412] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 195.469492] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 195.469607] c0 [CHKRA:6]> <6>[ 195.469702] c0 Read: 01 1c 00 80 03 01 02 47 00 4f 00 10 00 02 04 00 <7>[ 195.965257] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 195.965472] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 195.965646] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 195.972652] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 195.979651] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 195.980350] c0 read_hsic_cb: status:-2 actual:0 <7>[ 195.981640] c0 usb 1-2: usb auto-suspend <7>[ 195.995197] c0 hub 1-0:1.0: hub_suspend <7>[ 195.995265] c0 usb usb1: bus auto-suspend <7>[ 195.995311] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 195.995976] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 195.996027] c0 request_active_lock_release <6>[ 196.559176] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 196.559266] c0 mdm_hsic_rpm_check <6>[ 196.559315] c0 request_active_lock_set <7>[ 196.559466] c0 usb usb1: usb auto-resume <7>[ 196.559513] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 196.596079] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 196.610138] c0 hub 1-0:1.0: hub_resume <7>[ 196.610236] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 196.610323] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 196.610437] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 196.610519] c0 mif: usb_port_resume: 1283, 4 <7>[ 196.610573] c0 usb 1-2: finish resume <7>[ 196.610669] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 196.610746] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 196.613006] c0 usb 1-2: read_hsic: <7>[ 196.613304] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 196.613368] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 196.613461] c0 [CHKRA:3]> <7>[ 196.613515] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 196.613576] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 196.613668] c0 [CHKRA:5]> <7>[ 196.613719] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 196.613778] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 196.613869] c0 [CHKRA:6]> <7>[ 196.613933] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 196.613994] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 196.614085] c0 [CHKRA:7]> <7>[ 196.614135] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 196.614196] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 196.614288] c0 [CHKRA:8]> <6>[ 196.615720] c0 [NACB:6]< <6>[ 196.615777] c0 [NRA:6]> <7>[ 196.615858] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 196.617095] c0 [RACB:6]< <7>[ 196.617179] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 196.617244] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 196.617340] c0 [CHKRA:6]> <6>[ 196.617425] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 196.618562] c0 Write: 01 0c 00 00 03 01 00 48 00 4f 00 00 00 <6>[ 196.623737] c0 [NACB:6]< <6>[ 196.623801] c0 [NRA:6]> <7>[ 196.623893] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 196.625215] c0 [RACB:6]< <7>[ 196.625297] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 196.625365] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 196.625466] c0 [CHKRA:6]> <6>[ 196.625542] c0 Read: 01 1c 00 80 03 01 02 48 00 4f 00 10 00 02 04 00 <7>[ 197.125253] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 197.125435] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 197.125602] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 197.132424] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 197.139305] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 197.139866] c0 read_hsic_cb: status:-2 actual:0 <7>[ 197.141275] c0 usb 1-2: usb auto-suspend <7>[ 197.155192] c0 hub 1-0:1.0: hub_suspend <7>[ 197.155263] c0 usb usb1: bus auto-suspend <7>[ 197.155309] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 197.155744] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 197.155798] c0 request_active_lock_release <6>[ 197.739694] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 197.739790] c0 mdm_hsic_rpm_check <6>[ 197.739839] c0 request_active_lock_set <7>[ 197.739989] c0 usb usb1: usb auto-resume <7>[ 197.740036] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 197.781062] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 197.795182] c0 hub 1-0:1.0: hub_resume <7>[ 197.795279] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 197.795366] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 197.795503] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 197.795587] c0 mif: usb_port_resume: 1283, 4 <7>[ 197.795641] c0 usb 1-2: finish resume <7>[ 197.795767] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 197.795845] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 197.798153] c0 usb 1-2: read_hsic: <7>[ 197.798448] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 197.798511] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 197.798605] c0 [CHKRA:3]> <7>[ 197.798659] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 197.798719] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 197.798811] c0 [CHKRA:5]> <7>[ 197.798862] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 197.798921] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 197.799012] c0 [CHKRA:6]> <7>[ 197.799075] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 197.799136] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 197.799227] c0 [CHKRA:7]> <7>[ 197.799278] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 197.799338] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 197.799429] c0 [CHKRA:8]> <6>[ 197.800240] c0 [NACB:6]< <6>[ 197.800295] c0 [NRA:6]> <7>[ 197.800374] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 197.801861] c0 [RACB:6]< <7>[ 197.801944] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 197.802008] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 197.802105] c0 [CHKRA:6]> <6>[ 197.802186] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 197.803332] c0 Write: 01 0c 00 00 03 01 00 49 00 4f 00 00 00 <6>[ 197.808265] c0 [NACB:6]< <6>[ 197.808330] c0 [NRA:6]> <7>[ 197.808423] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 197.809616] c0 [RACB:6]< <7>[ 197.809700] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 197.809769] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 197.809868] c0 [CHKRA:6]> <6>[ 197.809948] c0 Read: 01 1c 00 80 03 01 02 49 00 4f 00 10 00 02 04 00 <7>[ 198.305158] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 198.305283] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 198.305400] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 198.311884] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 198.318400] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 198.318857] c0 read_hsic_cb: status:-2 actual:0 <7>[ 198.319872] c0 usb 1-2: usb auto-suspend <7>[ 198.330250] c0 hub 1-0:1.0: hub_suspend <7>[ 198.330318] c0 usb usb1: bus auto-suspend <7>[ 198.330364] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 198.331304] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 198.331356] c0 request_active_lock_release <6>[ 199.617012] c0 [VIB] haptic_work: pwm_config duty=27787 <6>[ 199.640062] c0 [VIB] haptic_work: pwm_config duty=27787 <6>[ 199.940850] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 199.940935] c0 mdm_hsic_rpm_check <6>[ 199.941009] c0 request_active_lock_set <7>[ 199.941162] c0 usb usb1: usb auto-resume <7>[ 199.941208] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 199.981010] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 199.995169] c0 hub 1-0:1.0: hub_resume <7>[ 199.995268] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 199.995354] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 199.995466] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 199.995550] c0 mif: usb_port_resume: 1283, 4 <7>[ 199.995604] c0 usb 1-2: finish resume <7>[ 199.995697] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 199.995775] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 199.998205] c0 usb 1-2: read_hsic: <7>[ 199.998501] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 199.998565] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 199.998657] c0 [CHKRA:3]> <7>[ 199.998712] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 199.998772] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 199.998864] c0 [CHKRA:5]> <7>[ 199.998914] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 199.998975] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 199.999065] c0 [CHKRA:6]> <7>[ 199.999128] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 199.999189] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 199.999280] c0 [CHKRA:7]> <7>[ 199.999332] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 199.999391] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 199.999484] c0 [CHKRA:8]> <6>[ 200.002427] c0 [NACB:6]< <6>[ 200.002488] c0 [NRA:6]> <7>[ 200.002574] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 200.003789] c0 [RACB:6]< <7>[ 200.003877] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 200.003945] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 200.004044] c0 [CHKRA:6]> <6>[ 200.004128] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 200.005375] c0 Write: 01 0c 00 00 03 01 00 4a 00 4f 00 00 00 <6>[ 200.010446] c0 [NACB:6]< <6>[ 200.010511] c0 [NRA:6]> <7>[ 200.010602] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 200.011913] c0 [RACB:6]< <7>[ 200.011992] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 200.012057] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 200.012153] c0 [CHKRA:6]> <6>[ 200.012229] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 200.018444] c0 [NACB:6]< <6>[ 200.018510] c0 [NRA:6]> <7>[ 200.018606] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 200.019787] c0 [RACB:6]< <7>[ 200.019870] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 200.019936] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 200.020035] c0 [CHKRA:6]> <6>[ 200.020161] c0 Read: 01 1c 00 80 03 01 02 4a 00 4f 00 10 00 02 04 00 <7>[ 200.515320] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 200.515537] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 200.515730] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 200.522633] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 200.529625] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 200.530312] c0 read_hsic_cb: status:-2 actual:0 <7>[ 200.531618] c0 usb 1-2: usb auto-suspend <7>[ 200.545192] c0 hub 1-0:1.0: hub_suspend <7>[ 200.545266] c0 usb usb1: bus auto-suspend <7>[ 200.545317] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 200.546472] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 200.546531] c0 request_active_lock_release <6>[ 202.638823] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 202.638918] c0 mdm_hsic_rpm_check <6>[ 202.638969] c0 request_active_lock_set <7>[ 202.639119] c0 usb usb1: usb auto-resume <7>[ 202.639166] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 202.675937] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 202.690149] c0 hub 1-0:1.0: hub_resume <7>[ 202.690248] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 202.690334] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 202.690449] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 202.690533] c0 mif: usb_port_resume: 1283, 4 <7>[ 202.690607] c0 usb 1-2: finish resume <7>[ 202.690720] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 202.690797] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 202.693011] c0 usb 1-2: read_hsic: <7>[ 202.693301] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 202.693364] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 202.693457] c0 [CHKRA:3]> <7>[ 202.693512] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 202.693573] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 202.693664] c0 [CHKRA:5]> <7>[ 202.693714] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 202.693773] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 202.693864] c0 [CHKRA:6]> <7>[ 202.693925] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 202.693984] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 202.694075] c0 [CHKRA:7]> <7>[ 202.694125] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 202.694184] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 202.694274] c0 [CHKRA:8]> <6>[ 202.695372] c0 [NACB:6]< <6>[ 202.695428] c0 [NRA:6]> <7>[ 202.695509] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 202.696865] c0 [RACB:6]< <7>[ 202.696945] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 202.697008] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 202.697103] c0 [CHKRA:6]> <6>[ 202.697181] c0 Read: 01 68 00 80 03 01 04 00 00 4e 00 5c 00 10 02 00 <6>[ 202.712575] c0 Write: 01 0c 00 00 03 01 00 4b 00 39 00 00 00 <6>[ 202.719400] c0 [NACB:6]< <6>[ 202.719467] c0 [NRA:6]> <7>[ 202.719564] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 202.720741] c0 [RACB:6]< <7>[ 202.720828] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 202.720894] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 202.720989] c0 [CHKRA:6]> <6>[ 202.721110] c0 Read: 01 1f 00 80 03 01 02 4b 00 39 00 13 00 02 04 00 <6>[ 202.762418] c0 Write: 01 0c 00 00 03 01 00 4c 00 43 00 00 00 <6>[ 202.775377] c0 [NACB:6]< <6>[ 202.775421] c0 [NRA:6]> <7>[ 202.775488] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 202.776723] c0 [RACB:6]< <7>[ 202.776769] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 202.776814] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 202.776875] c0 [CHKRA:6]> <6>[ 202.776931] c0 Read: 01 53 00 80 03 01 02 4c 00 43 00 47 00 02 04 00 <7>[ 203.275234] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 203.275416] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 203.275582] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 203.282076] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 203.289214] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 203.289768] c0 read_hsic_cb: status:-2 actual:0 <7>[ 203.291053] c0 usb 1-2: usb auto-suspend <7>[ 203.305210] c0 hub 1-0:1.0: hub_suspend <7>[ 203.305298] c0 usb usb1: bus auto-suspend <7>[ 203.305343] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 203.306401] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 203.306452] c0 request_active_lock_release <6>[ 205.826397] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 205.826484] c0 mdm_hsic_rpm_check <6>[ 205.826534] c0 request_active_lock_set <7>[ 205.826684] c0 usb usb1: usb auto-resume <7>[ 205.826731] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 205.866025] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 205.880181] c0 hub 1-0:1.0: hub_resume <7>[ 205.880302] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 205.880389] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 205.880502] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 205.880585] c0 mif: usb_port_resume: 1283, 4 <7>[ 205.880639] c0 usb 1-2: finish resume <7>[ 205.880766] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 205.880845] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 205.882974] c0 usb 1-2: read_hsic: <7>[ 205.883269] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 205.883333] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 205.883425] c0 [CHKRA:3]> <7>[ 205.883480] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 205.883540] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 205.883631] c0 [CHKRA:5]> <7>[ 205.883682] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 205.883742] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 205.883832] c0 [CHKRA:6]> <7>[ 205.883895] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 205.883954] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 205.884045] c0 [CHKRA:7]> <7>[ 205.884095] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 205.884154] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 205.884245] c0 [CHKRA:8]> <6>[ 205.887953] c0 [NACB:6]< <6>[ 205.888015] c0 [NRA:6]> <7>[ 205.888108] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 205.889435] c0 [RACB:6]< <7>[ 205.889531] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 205.889597] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 205.889696] c0 [CHKRA:6]> <6>[ 205.889782] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 205.891181] c0 Write: 01 0c 00 00 03 01 00 4d 00 4f 00 00 00 <6>[ 205.895956] c0 [NACB:6]< <6>[ 205.896019] c0 [NRA:6]> <7>[ 205.896109] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 205.897559] c0 [RACB:6]< <7>[ 205.897644] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 205.897708] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 205.897805] c0 [CHKRA:6]> <6>[ 205.897884] c0 Read: 01 1c 00 80 03 01 02 4d 00 4f 00 10 00 02 04 00 <7>[ 206.395244] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 206.395425] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 206.395591] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 206.402092] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 206.408594] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 206.408924] c0 read_hsic_cb: status:-2 actual:0 <7>[ 206.409939] c0 usb 1-2: usb auto-suspend <7>[ 206.420125] c0 hub 1-0:1.0: hub_suspend <7>[ 206.420163] c0 usb usb1: bus auto-suspend <7>[ 206.420188] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 206.420943] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 206.420973] c0 request_active_lock_release <6>[ 207.001237] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 207.001334] c0 mdm_hsic_rpm_check <6>[ 207.001386] c0 request_active_lock_set <7>[ 207.001540] c0 usb usb1: usb auto-resume <7>[ 207.001587] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 207.041270] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 207.055147] c0 hub 1-0:1.0: hub_resume <7>[ 207.055245] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 207.055334] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 207.055449] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 207.055532] c0 mif: usb_port_resume: 1283, 4 <7>[ 207.055587] c0 usb 1-2: finish resume <7>[ 207.055684] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 207.055763] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 207.057942] c0 usb 1-2: read_hsic: <7>[ 207.058234] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 207.058298] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 207.058390] c0 [CHKRA:3]> <7>[ 207.058444] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 207.058504] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 207.058596] c0 [CHKRA:5]> <7>[ 207.058647] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 207.058707] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 207.058800] c0 [CHKRA:6]> <7>[ 207.058862] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 207.058921] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 207.059012] c0 [CHKRA:7]> <7>[ 207.059062] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 207.059122] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 207.059214] c0 [CHKRA:8]> <6>[ 207.060797] c0 [NACB:6]< <6>[ 207.060853] c0 [NRA:6]> <7>[ 207.060934] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 207.062164] c0 [RACB:6]< <7>[ 207.062243] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 207.062305] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 207.062398] c0 [CHKRA:6]> <6>[ 207.062668] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 207.063841] c0 Write: 01 0c 00 00 03 01 00 4e 00 4f 00 00 00 <6>[ 207.068814] c0 [NACB:6]< <6>[ 207.068878] c0 [NRA:6]> <7>[ 207.068971] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 207.070167] c0 [RACB:6]< <7>[ 207.070243] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 207.070308] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 207.070405] c0 [CHKRA:6]> <6>[ 207.070497] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 207.076824] c0 [NACB:6]< <6>[ 207.076884] c0 [NRA:6]> <7>[ 207.076971] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 207.078159] c0 [RACB:6]< <7>[ 207.078228] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 207.078291] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 207.078386] c0 [CHKRA:6]> <6>[ 207.078475] c0 Read: 01 1c 00 80 03 01 02 4e 00 4f 00 10 00 02 04 00 <7>[ 207.575240] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 207.575425] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 207.575620] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 207.582380] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 207.589379] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 207.589941] c0 read_hsic_cb: status:-2 actual:0 <7>[ 207.591114] c0 usb 1-2: usb auto-suspend <7>[ 207.605175] c0 hub 1-0:1.0: hub_suspend <7>[ 207.605242] c0 usb usb1: bus auto-suspend <7>[ 207.605289] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 207.605820] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 207.605872] c0 request_active_lock_release <6>[ 208.177468] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 208.177557] c0 mdm_hsic_rpm_check <6>[ 208.177607] c0 request_active_lock_set <7>[ 208.177756] c0 usb usb1: usb auto-resume <7>[ 208.177802] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 208.216122] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 208.230137] c0 hub 1-0:1.0: hub_resume <7>[ 208.230236] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 208.230323] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 208.230435] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 208.230517] c0 mif: usb_port_resume: 1283, 4 <7>[ 208.230572] c0 usb 1-2: finish resume <7>[ 208.230664] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 208.230769] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 208.232923] c0 usb 1-2: read_hsic: <7>[ 208.233220] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 208.233284] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 208.233377] c0 [CHKRA:3]> <7>[ 208.233432] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 208.233491] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 208.233582] c0 [CHKRA:5]> <7>[ 208.233633] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 208.233693] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 208.233783] c0 [CHKRA:6]> <7>[ 208.233846] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 208.233906] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 208.234028] c0 [CHKRA:7]> <7>[ 208.234082] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 208.234142] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 208.234234] c0 [CHKRA:8]> <6>[ 208.241010] c0 [NACB:6]< <6>[ 208.241080] c0 [NRA:6]> <7>[ 208.241172] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 208.242375] c0 [RACB:6]< <7>[ 208.242458] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 208.242525] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 208.242624] c0 [CHKRA:6]> <6>[ 208.242707] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 208.244066] c0 Write: 01 0c 00 00 03 01 00 4f 00 4f 00 00 00 <6>[ 208.249030] c0 [NACB:6]< <6>[ 208.249094] c0 [NRA:6]> <7>[ 208.249186] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 208.250379] c0 [RACB:6]< <7>[ 208.250462] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 208.250529] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 208.250629] c0 [CHKRA:6]> <6>[ 208.250713] c0 Read: 01 1c 00 80 03 01 02 4f 00 4f 00 10 00 02 04 00 <7>[ 208.750309] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 208.750498] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 208.750671] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 208.757467] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 208.764584] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 208.765171] c0 read_hsic_cb: status:-2 actual:0 <7>[ 208.766446] c0 usb 1-2: usb auto-suspend <7>[ 208.780180] c0 hub 1-0:1.0: hub_suspend <7>[ 208.780248] c0 usb usb1: bus auto-suspend <7>[ 208.780293] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 208.781061] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 208.781113] c0 request_active_lock_release <6>[ 209.362559] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 209.362648] c0 mdm_hsic_rpm_check <6>[ 209.362698] c0 request_active_lock_set <7>[ 209.362849] c0 usb usb1: usb auto-resume <7>[ 209.362897] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 209.401287] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 209.415235] c0 hub 1-0:1.0: hub_resume <7>[ 209.415334] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 209.415421] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 209.415536] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 209.415619] c0 mif: usb_port_resume: 1283, 4 <7>[ 209.415673] c0 usb 1-2: finish resume <7>[ 209.415788] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 209.415867] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 209.418257] c0 usb 1-2: read_hsic: <7>[ 209.418557] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 209.418624] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 209.418722] c0 [CHKRA:3]> <7>[ 209.418778] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 209.418840] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 209.418934] c0 [CHKRA:5]> <7>[ 209.418986] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 209.419049] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 209.419142] c0 [CHKRA:6]> <7>[ 209.419207] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 209.419270] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 209.419364] c0 [CHKRA:7]> <7>[ 209.419416] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 209.419478] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 209.419574] c0 [CHKRA:8]> <6>[ 209.423116] c0 [NACB:6]< <6>[ 209.423178] c0 [NRA:6]> <7>[ 209.423265] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 209.424601] c0 [RACB:6]< <7>[ 209.424694] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 209.424759] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 209.424855] c0 [CHKRA:6]> <6>[ 209.424940] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 209.426177] c0 Write: 01 0c 00 00 03 01 00 50 00 4f 00 00 00 <6>[ 209.439120] c0 [NACB:6]< <6>[ 209.439190] c0 [NRA:6]> <7>[ 209.439281] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 209.440474] c0 [RACB:6]< <7>[ 209.440556] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 209.440621] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 209.440717] c0 [CHKRA:6]> <6>[ 209.440801] c0 Read: 01 1c 00 80 03 01 02 50 00 4f 00 10 00 02 04 00 <7>[ 209.940234] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 209.940440] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 209.940625] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 209.947546] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 209.954450] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 209.954999] c0 read_hsic_cb: status:-2 actual:0 <7>[ 209.956283] c0 usb 1-2: usb auto-suspend <7>[ 209.970192] c0 hub 1-0:1.0: hub_suspend <7>[ 209.970262] c0 usb usb1: bus auto-suspend <7>[ 209.970309] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 209.971130] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 209.971183] c0 request_active_lock_release <6>[ 210.531306] c0 mdm_hsic_irq_handler: detect Rising edge <6>[ 210.531385] c0 mdm_hsic_rpm_check <6>[ 210.531432] c0 request_active_lock_set <7>[ 210.531577] c0 usb usb1: usb auto-resume <7>[ 210.531623] c0 s5p-ehci s5p-ehci: resume root hub <6>[ 210.571316] c0 mdm_hsic_irq_handler: detect Falling edge <7>[ 210.585190] c0 hub 1-0:1.0: hub_resume <7>[ 210.585311] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 210.585417] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 210.585548] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 210.585649] c0 mif: usb_port_resume: 1283, 4 <7>[ 210.585715] c0 usb 1-2: finish resume <7>[ 210.585845] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 210.585939] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 210.588411] c0 usb 1-2: read_hsic: <7>[ 210.588718] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 210.588795] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 210.588903] c0 [CHKRA:3]> <7>[ 210.588963] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 210.589036] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 210.589139] c0 [CHKRA:5]> <7>[ 210.589198] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 210.589269] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 210.589374] c0 [CHKRA:6]> <7>[ 210.589442] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 210.589513] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 210.589618] c0 [CHKRA:7]> <7>[ 210.589673] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 210.589742] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 210.589845] c0 [CHKRA:8]> <6>[ 210.591839] c0 [NACB:6]< <6>[ 210.591899] c0 [NRA:6]> <7>[ 210.591997] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 210.593202] c0 [RACB:6]< <7>[ 210.593289] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 210.593360] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 210.593464] c0 [CHKRA:6]> <6>[ 210.593696] c0 Read: 01 10 00 80 03 01 04 00 00 51 00 04 00 12 01 00 <6>[ 210.594942] c0 Write: 01 0c 00 00 03 01 00 51 00 4f 00 00 00 <6>[ 210.607855] c0 [NACB:6]< <6>[ 210.607933] c0 [NRA:6]> <7>[ 210.608042] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 210.609196] c0 [RACB:6]< <7>[ 210.609277] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 210.609349] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 210.609455] c0 [CHKRA:6]> <6>[ 210.609545] c0 Read: 01 1c 00 80 03 01 02 51 00 4f 00 10 00 02 04 00 <7>[ 211.105234] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 211.105417] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 211.105587] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 211.112523] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 211.119532] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 211.120101] c0 read_hsic_cb: status:-2 actual:0 <7>[ 211.121395] c0 usb 1-2: usb auto-suspend <7>[ 211.135205] c0 hub 1-0:1.0: hub_suspend <7>[ 211.135277] c0 usb usb1: bus auto-suspend <7>[ 211.135324] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 211.135854] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 211.135907] c0 request_active_lock_release <6>[ 224.669850] c0 lcd panel: brightness=37, bl=1, candela=30 <6>[ 224.733768] c0 lcd panel: brightness=27, bl=0, candela=20 <6>[ 224.988178] c0 cm36651_work_func_light, red = 3 green = 3 blue = 3 white = 5 <6>[ 230.615829] c0 light_enable_store,new_value=0 <6>[ 231.231053] c0 request_suspend_state: sleep (0->3) at 231230960035 (2013-02-24 17:32:45.685853350 UTC) <7>[ 231.231180] c0 [TouchKey] sec_touchkey_early_suspend <5>[ 231.231852] c0 melfas-ts 3-0048: mms_ts_suspend: users=1 <7>[ 231.231910] c0 [TSP] release_all_fingers <7>[ 231.232016] c0 [TSP] dvfs_lock free. <7>[ 231.232047] c0 <7>[ 231.232079] c0 [TSP] melfas_power off <4>[ 231.285181] c0 dhd_early_suspend: enter <4>[ 231.285237] c0 dhd_set_suspend: force extra Suspend setting <6>[ 231.287601] c0 lsm330dlc_accel_ioctl: opened = 1, enable = 0 <6>[ 231.298251] c0 graphics fb0: lcdfreq_early_suspend <4>[ 231.298280] c0 s3cfb_extdsp_early_suspend is called <6>[ 231.298306] c0 sii9234_early_suspend() <6>[ 231.298328] c0 +s3cfb_early_suspend <6>[ 231.298351] c0 lcd panel: +s6e8ax0_early_suspend <6>[ 231.298385] c0 lcd panel: s6e8ax0_power_off <6>[ 231.350498] c0 Write: 01 13 00 00 0c 01 00 0a 00 01 00 07 00 01 04 00 <6>[ 231.350556] c0 request_active_lock_set <7>[ 231.350681] c0 usb usb1: usb auto-resume <7>[ 231.350710] c0 s5p-ehci s5p-ehci: resume root hub <7>[ 231.405123] c0 hub 1-0:1.0: hub_resume <7>[ 231.405180] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 231.405238] c0 hub 1-0:1.0: port 2: status 0503 change 0004 <7>[ 231.405300] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 231.405355] c0 mif: usb_port_resume: 1283, 4 <7>[ 231.405387] c0 usb 1-2: finish resume <7>[ 231.405441] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 231.405486] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <6>[ 231.408637] c0 usb 1-2: read_hsic: <7>[ 231.408748] c0 s5p-ehci s5p-ehci: reused qh eab8fb80 schedule <7>[ 231.408788] c0 usb 1-2: link qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 231.408842] c0 [CHKRA:3]> <7>[ 231.408872] c0 s5p-ehci s5p-ehci: reused qh eab8f080 schedule <7>[ 231.408910] c0 usb 1-2: link qh8-0001/eab8f080 start 6 [2/0 us] <6>[ 231.408964] c0 [CHKRA:5]> <7>[ 231.408992] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 231.409033] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.409085] c0 [CHKRA:6]> <7>[ 231.409117] c0 s5p-ehci s5p-ehci: reused qh eab8f0c0 schedule <7>[ 231.409156] c0 usb 1-2: link qh8-0001/eab8f0c0 start 0 [2/0 us] <6>[ 231.409209] c0 [CHKRA:7]> <7>[ 231.409236] c0 s5p-ehci s5p-ehci: reused qh eab8f240 schedule <7>[ 231.409275] c0 usb 1-2: link qh8-0001/eab8f240 start 1 [2/0 us] <6>[ 231.409329] c0 [CHKRA:8]> <6>[ 231.422888] c0 [NACB:6]< <6>[ 231.422921] c0 [NRA:6]> <7>[ 231.422976] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.426129] c0 [RACB:6]< <7>[ 231.426169] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 231.426210] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.426264] c0 [CHKRA:6]> <6>[ 231.426321] c0 Read: 01 1a 00 80 0c 01 02 0a 00 01 00 0e 00 02 04 00 <6>[ 231.426730] c0 Write: 01 b5 00 00 03 01 00 52 00 50 00 a9 00 10 0f 00 <6>[ 231.438896] c0 [NACB:6]< <6>[ 231.438939] c0 [NRA:6]> <7>[ 231.439010] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.440114] c0 lcd panel: -s6e8ax0_early_suspend <6>[ 231.440256] c0 [RACB:6]< <7>[ 231.440304] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 231.440355] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.440426] c0 [CHKRA:6]> <6>[ 231.445123] c0 Read: 01 13 00 80 03 01 02 52 00 50 00 07 00 02 04 00 <6>[ 231.445505] c0 Write: 01 10 00 00 03 01 00 53 00 02 00 04 00 12 01 00 <6>[ 231.451845] c0 s5p-dsim s5p-dsim.0: +s5p_dsim_early_suspend <6>[ 231.451916] c0 lcd_power_on : enable=0 <6>[ 231.452419] c0 s5p-dsim s5p-dsim.0: -s5p_dsim_early_suspend <7>[ 231.452484] c0 s3cfb - disable power domain <6>[ 231.452743] c0 -s3cfb_early_suspend <6>[ 231.452802] c0 sync_system + <6>[ 231.454902] c0 [NACB:6]< <6>[ 231.454963] c0 [NRA:6]> <7>[ 231.455062] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.455728] c0 active wake lock sync_system <6>[ 231.455782] c0 active wake lock mdm_hsic_pm0 <6>[ 231.455832] c0 active wake lock PowerManagerService <6>[ 231.455888] c0 active wake lock hsicctl0, time left 97 <6>[ 231.456134] c0 [RACB:6]< <7>[ 231.456200] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 231.456272] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.456368] c0 [CHKRA:6]> <6>[ 231.456465] c0 Read: 01 13 00 80 03 01 02 53 00 02 00 07 00 02 04 00 <6>[ 231.457074] c0 Write: 01 3c 00 00 03 01 00 54 00 03 00 30 00 10 01 00 <6>[ 231.470917] c0 [NACB:6]< <6>[ 231.470980] c0 [NRA:6]> <7>[ 231.471080] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.472510] c0 [RACB:6]< <7>[ 231.472582] c0 s5p-ehci s5p-ehci: reused qh eab8f200 schedule <7>[ 231.472654] c0 usb 1-2: link qh8-0001/eab8f200 start 7 [2/0 us] <6>[ 231.472751] c0 [CHKRA:6]> <6>[ 231.472829] c0 Read: 01 13 00 80 03 01 02 54 00 03 00 07 00 02 04 00 <6>[ 231.480250] c0 sync_system - <7>[ 231.970380] c0 usb 1-2: unlink qh8-0001/eab8f240 start 1 [2/0 us] <7>[ 231.970736] c0 usb 1-2: unlink qh8-0001/eab8f0c0 start 0 [2/0 us] <7>[ 231.971073] c0 usb 1-2: unlink qh8-0001/eab8f200 start 7 [2/0 us] <7>[ 231.983733] c0 usb 1-2: unlink qh8-0001/eab8f080 start 6 [2/0 us] <7>[ 231.997034] c0 usb 1-2: unlink qh8-0001/eab8fb80 start 5 [2/0 us] <6>[ 231.997992] c0 read_hsic_cb: status:-2 actual:0 <7>[ 231.999336] c0 usb 1-2: usb auto-suspend <7>[ 232.010410] c0 hub 1-0:1.0: hub_suspend <7>[ 232.010559] c0 usb usb1: bus auto-suspend <7>[ 232.010666] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 232.011974] c0 s5p-ehci s5p-ehci: host_phy_susp:4 <6>[ 232.012098] c0 request_active_lock_release <6>[ 232.032547] c0 suspend: enter suspend <6>[ 232.032681] c0 suspend: enter suspend, (2013-02-24 17:32:46.487479601 UTC) <6>[ 232.032835] c0 PM: Syncing filesystems ... done. <6>[ 232.058669] c0 mdm_hsic_pm_notify_event: block request <4>[ 232.058700] c0 Freezing user space processes ... (elapsed 0.01 seconds) done. <4>[ 232.075258] c0 Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. <4>[ 232.090209] c0 Suspending console(s) (use no_console_suspend to debug) <6>[ 232.090467] c0 samsung_battery_prepare <6>[ 232.090491] c0 battery_monitor_interval: apply weight(120), 7200 -> 8640 <6>[ 232.092029] c0 s5p-ohci s5p-ohci: still being used(2) <6>[ 232.092126] c0 check_udev_suspend_allowed:state_busy = 0, suspended = 1(rpmstat = 2:dpth:0), suspended_child = 1 <6>[ 232.092174] c0 dev rdy val = 1 <6>[ 232.092191] c0 set_host_stat:set host port power status to [0] <6>[ 232.102210] c0 wait_dev_pwr_stat:[PWR OFF]... <6>[ 232.132200] c0 done <6>[ 232.132220] c0 s5p-ehci s5p-ehci: usb host phy off <6>[ 232.136223] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 232.136256] c0 wm8994-codec wm8994-codec: write 200 = 9 <6>[ 232.136462] c0 wm8994-codec wm8994-codec: write d0 = 0 <6>[ 232.136654] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 232.136688] c0 wm8994-codec wm8994-codec: write 220 = 4 <6>[ 232.136886] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 232.136919] c0 wm8994-codec wm8994-codec: write 302 = 0 <6>[ 232.137108] c0 Sound: disabled mclk <7>[ 232.137130] c0 pmu_debug: 0x00000901 <6>[ 232.137149] c0 Sound: state: 0, use_cnt: 0 <7>[ 232.137170] c0 xusbxti_control: 0 <6>[ 232.160385] c0 max77686_rtc_read_time: 113/1/24 17:32:47(0) <6>[ 232.185394] c0 max77686_rtc_read_time: 113/1/24 17:32:47(0) <6>[ 232.185424] c0 max77686_rtc_set_alarm: 113/1/24 17:32:51(0) <6>[ 232.210383] c0 max77686_rtc_stop_alarm: 113/1/24 17:32:9(0) <6>[ 232.285393] c0 max77686_rtc_start_alarm: 113/1/24 17:32:51(0) <6>[ 232.335394] c0 max77686_rtc_read_time: 113/1/24 17:32:47(0) <6>[ 232.360383] c0 max77686_rtc_read_time: 113/1/24 17:32:47(0) <6>[ 232.360511] c0 wm8994-codec wm8994-codec: write 39 = 81 <6>[ 232.361107] c0 wake enabled for irq 359 <6>[ 232.361617] c0 max77693_charger_suspend <6>[ 232.362490] c0 wake enabled for irq 365 <6>[ 232.362525] c0 max17047_fuelgauge_suspend <6>[ 232.362549] c0 max17047_fuelgauge_suspend: charge state(2), vcell(4085000), valrt(3350000) <6>[ 232.362588] c0 max17047_set_valrt: min(3340mV), max(5100mV) <6>[ 232.363779] c0 wake enabled for irq 375 <6>[ 232.363801] c0 wake enabled for irq 353 <6>[ 232.363828] c0 samsung_battery_suspend <6>[ 232.363889] c0 flite_suspend <6>[ 232.363906] c0 flite_suspend-- <6>[ 232.363924] c0 flite_suspend <6>[ 232.363940] c0 flite_suspend-- <6>[ 232.363995] c0 fimc_suspend <6>[ 232.364012] c0 fimc_suspend-- <6>[ 232.364030] c0 fimc_suspend <6>[ 232.364046] c0 fimc_suspend-- <6>[ 232.364065] c0 fimc_suspend <6>[ 232.364080] c0 fimc_suspend-- <6>[ 232.364098] c0 fimc_suspend <6>[ 232.364113] c0 fimc_suspend-- <6>[ 232.364136] c0 s5p_int_src_ext_hpd() <6>[ 232.364166] c0 FIMC_IS suspend <6>[ 232.364183] c0 FIMC_IS suspend end <6>[ 232.364211] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 232.364242] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 232.364279] c0 sdhci_suspend_host : Enter WIFI suspend <6>[ 232.364769] c0 sdhci_suspend_host : MMC Card OFF <6>[ 232.365126] c0 exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. <7>[ 232.370133] c0 usb: android_work config= (null),connected=0,sw_connected=0 <7>[ 232.370168] c0 usb: android_work did not send uevent (0 0 (null)) <6>[ 232.415433] c0 PM: suspend of devices complete after 324.001 msecs <7>[ 232.415464] c0 suspend_enter:148 <4>[ 232.415730] c0 suspend_set_state: vdd_g3d range: No configuration <4>[ 232.415761] c0 suspend_set_state: vdd_int range: No configuration <4>[ 232.415791] c0 suspend_set_state: vdd_arm range: No configuration <4>[ 232.415820] c0 suspend_set_state: vdd_mif range: No configuration <6>[ 232.415853] c0 regulator regulator.3: func:max77693_reg_enable_suspend <6>[ 232.415885] c0 regulator regulator.2: func:max77693_reg_enable_suspend <7>[ 232.415917] c0 suspend_enter:156 <7>[ 232.416625] c0 platform_pm_suspend_noirq: s3c2440-i2c.5+ <7>[ 232.416653] c0 platform_pm_suspend_noirq: s3c2440-i2c.5- <7>[ 232.416742] c0 platform_pm_suspend_noirq: s3c2440-i2c.7+ <7>[ 232.416768] c0 platform_pm_suspend_noirq: s3c2440-i2c.7- <7>[ 232.416796] c0 platform_pm_suspend_noirq: s3c2440-i2c.4+ <7>[ 232.416822] c0 platform_pm_suspend_noirq: s3c2440-i2c.4- <7>[ 232.416849] c0 platform_pm_suspend_noirq: s3c2440-i2c.3+ <7>[ 232.416874] c0 platform_pm_suspend_noirq: s3c2440-i2c.3- <7>[ 232.416901] c0 platform_pm_suspend_noirq: s3c2440-i2c.1+ <7>[ 232.416927] c0 platform_pm_suspend_noirq: s3c2440-i2c.1- <7>[ 232.416954] c0 platform_pm_suspend_noirq: s3c2440-i2c.0+ <7>[ 232.416980] c0 platform_pm_suspend_noirq: s3c2440-i2c.0- <7>[ 232.417072] c0 platform_pm_suspend_noirq: power.0+ <6>[ 232.417096] c0 power_suspend_late return 0 <7>[ 232.417117] c0 platform_pm_suspend_noirq: power.0- <6>[ 232.417145] c0 PM: late suspend of devices complete after 1.207 msecs <7>[ 232.417176] c0 suspend_enter:164 <4>[ 232.417193] c0 Disabling non-boot CPUs ... <7>[ 232.417214] c0 suspend_enter:179 <7>[ 232.417340] c0 suspend_enter:186 <1>[ 232.417657] c0 PM: SLEEP <1>[ 232.417677] c0 ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00070000], CORE3[0x00070000] <6>[ 1099.509156] c0 WAKEUP_STAT: 0x80000001 <6>[ 1099.509156] c0 WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 <7>[ 1099.509156] c0 exynos4_pm_resume:544 <7>[ 1099.509156] c0 exynos4_pm_resume:560 <7>[ 1099.509156] c0 exynos4_pm_resume:575 <7>[ 1099.509156] c0 exynos4_pm_resume:586 <7>[ 1099.509156] c0 exynos4_pm_resume:592 <7>[ 1099.509156] c0 exynos4_pm_resume:596 <7>[ 1099.509156] c0 exynos4_pm_resume:607 <7>[ 1099.509156] c0 exynos4_pm_resume:618 <6>[ 232.417418] c0 notifier_call_chain : NOTIFY BAD cpufreq_stat_notifier_policy <6>[ 232.418442] c0 PM: early resume of devices complete after 0.963 msecs <6>[ 232.418621] c0 max77686_irq_unmask: group=2, cur=0xfd <6>[ 232.419381] c0 exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. <6>[ 232.419649] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ########### <6>[ 232.419838] c0 s3c2410-wdt: watchdog disabled <6>[ 232.419869] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling <6>[ 232.420533] c0 sdhci_resume_host : MMC Card ON <6>[ 232.579626] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42] <6>[ 232.579669] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7] <6>[ 232.579705] c0 FIMC_IS resume <6>[ 232.579722] c0 FIMC_IS resume end <6>[ 232.579768] c0 fimc_resume <6>[ 232.579786] c0 fimc_resume-- <6>[ 232.579805] c0 fimc_resume <6>[ 232.579821] c0 fimc_resume-- <6>[ 232.579840] c0 fimc_resume <6>[ 232.579857] c0 fimc_resume-- <6>[ 232.579876] c0 fimc_resume <6>[ 232.579936] c0 fimc_resume-- <6>[ 232.579986] c0 flite_resume <6>[ 232.580004] c0 flite_resume-- <6>[ 232.580023] c0 flite_resume <6>[ 232.580040] c0 flite_resume-- <6>[ 232.581480] c0 samsung_battery_resume <6>[ 232.585125] c0 wake disabled for irq 375 <7>[ 232.585149] c0 [keys]PWR 0 <6>[ 232.585167] c0 wake disabled for irq 353 <6>[ 232.585319] c0 max17047_fuelgauge_resume <6>[ 232.585344] c0 max17047_set_valrt: min(0mV), max(5100mV) <6>[ 232.586488] c0 wake disabled for irq 365 <6>[ 232.590769] c0 max77693_irq_thread: interrupt source(0x00) <6>[ 232.590804] c0 max77693 17-0066: max77693_irq_resume: irq_resume ret=1 <6>[ 232.590845] c0 max77693_charger_resume <6>[ 232.591790] c0 wake disabled for irq 359 <6>[ 232.591974] c0 max77686_irq_thread: irq_src=0x1 <6>[ 232.592275] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 232.592443] c0 max77686_irq_thread: rtc int=0x12 <6>[ 232.592473] c0 max77686-rtc max77686-rtc: max77686_rtc_alarm_irq:irq(464) <6>[ 232.592653] c0 max77686_irq_thread: irq_src=0x0 <6>[ 232.592948] c0 max77686_irq_thread: int1=0x0, int2=0x0 <6>[ 232.593330] c0 wm8994-codec wm8994-codec: write 39 = 181 <6>[ 232.594919] c0 max17047_get_soc: SOC(84, 8317 / 9821) <6>[ 232.597029] c0 battery_interval_calulation: v diff(48000), weight(120) <6>[ 232.597068] c0 battery_interval_calulation: weight(120) <6>[ 232.597104] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <6>[ 232.597162] c0 wakeup wake lock: power-supply <6>[ 232.597196] c0 [18] bat: s(84, -12), v(4080, -48), t(26.4), cs(2, 2), cb(0), cr(0, 0) <6>[ 232.620430] c0 max77686_rtc_read_time: 113/1/24 17:32:51(0) <6>[ 232.645416] c0 max77686_rtc_stop_alarm: 113/1/24 17:32:51(0) <6>[ 232.695414] c0 max77686_rtc_read_time: 113/1/24 17:32:51(0) <6>[ 232.695815] c0 set hsic lpa phy init <6>[ 232.695841] c0 s5p-ehci s5p-ehci: usb phy usage(2) <7>[ 232.696007] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1 <7>[ 232.696052] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 232.696090] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000 <7>[ 232.696122] c0 s5p-ehci s5p-ehci: lost power, restarting <4>[ 232.696152] c0 usb usb1: root hub lost power or was reset <7>[ 232.696191] c0 s5p-ehci s5p-ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 232.696808] c0 s5p-ehci s5p-ehci: ...powerup ports... <6>[ 232.696901] c0 Sound: enabled mclk <7>[ 232.696924] c0 pmu_debug: 0x00000900 <6>[ 232.706930] c0 Sound: state: 1, use_cnt: 1 <6>[ 232.706956] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++ <6>[ 232.707000] c0 wm8994-codec wm8994-codec: write 220 = 5 <6>[ 232.715125] c0 wm8994-codec wm8994-codec: _wm8994_set_fll -- <6>[ 232.715159] c0 wm8994-codec wm8994-codec: write 200 = 11 <6>[ 232.715355] c0 wm8994-codec wm8994-codec: write d0 = cc00 <6>[ 232.715550] c0 wm8994-codec wm8994-codec: write 302 = 4000 <6>[ 232.720115] c0 dev rdy val = 0 <6>[ 232.720137] c0 set_host_stat:set host port power status to [1] <6>[ 232.720170] c0 wait_dev_pwr_stat:[PWR ON]... <6>[ 232.780509] c0 done <7>[ 232.795127] c0 usb usb1: usb resume <7>[ 232.795152] c0 s5p-ehci s5p-ehci: resume root hub after power loss <7>[ 232.825101] c0 hub 1-0:1.0: hub_reset_resume <7>[ 232.825130] c0 hub 1-0:1.0: enabling power on all ports <7>[ 232.825196] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 232.825244] c0 hub 1-0:1.0: port 2: status 0501 change 0001 <6>[ 232.825345] c0 mif: usb_port_resume: 1281, 0 <6>[ 232.825411] c0 s5p-ohci s5p-ohci: usb phy usage(6) <3>[ 232.825439] c0 s5p-ohci s5p-ohci: Already power on PHY <7>[ 232.825469] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1 <7>[ 232.825513] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3 <7>[ 232.825549] c0 s5p-ohci s5p-ohci: lost power <7>[ 232.860111] c0 usb 1-2: finish reset-resume <7>[ 232.884116] c0 s5p-ohci s5p-ohci: OHCI controller state <7>[ 232.884150] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers <7>[ 232.884188] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3 <7>[ 232.884225] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0 <7>[ 232.884257] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF <7>[ 232.884289] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH <7>[ 232.884329] c0 s5p-ohci s5p-ohci: hcca frame #0005 <7>[ 232.884359] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3) <7>[ 232.884396] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000 <7>[ 232.884432] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE <7>[ 232.884467] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS <7>[ 232.884504] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS <7>[ 232.884541] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS <7>[ 232.884575] c0 s5p-ohci s5p-ohci: restart complete <4>[ 232.884601] c0 usb usb2: root hub lost power or was reset <7>[ 232.884632] c0 s5p-ohci s5p-ohci: suspend root hub <7>[ 232.884688] c0 usb usb2: usb resume <7>[ 232.890115] c0 s5p-ohci s5p-ohci: resume root hub <7>[ 232.915185] c0 s5p-ehci s5p-ehci: port 2 high speed <7>[ 232.915221] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 232.915300] c0 usb 1-2: reset high speed USB device number 2 using s5p-ehci <6>[ 232.953080] c0 usb 1-2: read_hsic: <7>[ 232.953241] c0 usb 1-2: link qh8-0001/eab5e3c0 start 2 [2/0 us] <6>[ 232.953295] c0 [CHKRA:3]> <7>[ 232.953331] c0 usb 1-2: link qh8-0001/eb659e00 start 3 [2/0 us] <6>[ 232.953384] c0 [CHKRA:5]> <7>[ 232.953417] c0 usb 1-2: link qh8-0001/eb659300 start 4 [2/0 us] <6>[ 232.953470] c0 [CHKRA:6]> <7>[ 232.953508] c0 usb 1-2: link qh8-0001/f1afea80 start 5 [2/0 us] <6>[ 232.953561] c0 [CHKRA:7]> <7>[ 232.953593] c0 usb 1-2: link qh8-0001/f1803800 start 6 [2/0 us] <6>[ 232.953646] c0 [CHKRA:8]> <6>[ 232.954950] c0 [NACB:3]< <7>[ 232.954971] c0 usb 1-2: serial state: 3 <6>[ 232.954994] c0 notification_available_cb: set lpa handling to false <6>[ 232.955033] c0 [CHKRA:3]> <7>[ 232.970125] c0 hub 2-0:1.0: hub_reset_resume <7>[ 232.970153] c0 hub 2-0:1.0: trying to enable port power on non-switchable hub <6>[ 233.075298] c0 PM: resume of devices complete after 656.635 msecs <6>[ 233.075704] c0 samsung_battery_complete <6>[ 233.075731] c0 battery_monitor_interval: apply weight(120), 120 -> 144 <4>[ 233.075975] c0 Restarting tasks ... <6>[ 233.080108] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 <6>[ 233.080171] c0 normal: free cpufreq_limit & interrupt enable. <7>[ 233.080587] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000 <7>[ 233.080637] c0 hub 1-0:1.0: port 2, status 0503, change 0000, 480 Mb/s <7>[ 233.080681] c0 hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 233.083756] c0 mdm_modem_ioctl: wait for mdm to need images reloaded <4>[ 233.088540] c0 done. <6>[ 233.096675] c0 mdm_hsic_pm_notify_event: unblock request <6>[ 233.096712] c0 request_active_lock_set <6>[ 233.096745] c0 suspend: exit suspend, ret = 0 (2013-02-24 17:32:51.496557792 UTC) <6>[ 233.096787] c0 active wake lock mdm_hsic_pm0 <6>[ 233.096811] c0 active wake lock PowerManagerService <6>[ 233.096840] c0 active wake lock battery-monitor, time left 100 <6>[ 233.096871] c0 suspend: abort suspend <6>[ 233.115215] c0 mdm_hsic_rpm_check <6>[ 233.115274] c0 mdm_hsic_rpm_restart <7>[ 233.450388] c0 usb 1-2: unlink qh8-0001/f1803800 start 6 [2/0 us] <7>[ 233.450660] c0 usb 1-2: unlink qh8-0001/f1afea80 start 5 [2/0 us] <7>[ 233.450900] c0 usb 1-2: unlink qh8-0001/eb659300 start 4 [2/0 us] <7>[ 233.457980] c0 usb 1-2: unlink qh8-0001/eb659e00 start 3 [2/0 us] <7>[ 233.465973] c0 usb 1-2: unlink qh8-0001/eab5e3c0 start 2 [2/0 us] <6>[ 233.466472] c0 read_hsic_cb: status:-2 actual:0 <7>[ 233.467686] c0 usb 1-2: usb auto-suspend <7>[ 233.480176] c0 hub 1-0:1.0: hub_suspend <7>[ 233.480222] c0 usb usb1: bus auto-suspend <7>[ 233.480251] c0 s5p-ehci s5p-ehci: suspend root hub <6>[ 233.480977] c0 request_active_lock_release <6>[ 233.595174] c0 wake lock battery-monitor, expired