[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-23-generic (buildd@allspice) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #74-Ubuntu SMP Mon Feb 28 22:20:11 UTC 2011 (Ubuntu 2.6.31-23.74-generic) [ 0.000000] Command line: root=UUID=eb7de102-905b-48ab-a653-344fc3e708be ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ c000-12000 [ 0.000000] RAMDISK: 37777000 - 37feff81 [ 0.000000] ACPI: RSDP 00000000000f6b00 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfee3180 04B32 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: HPET 00000000dfee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000dfee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000dfee7f00 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.000000] ACPI: SSDT 00000000dfee8390 00275 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 0000000000035fff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019ebe8c] TEXT DATA BSS ==> [0001000000 - 00019ebe8c] [ 0.000000] #3 [0037777000 - 0037feff81] RAMDISK ==> [0037777000 - 0037feff81] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019ec000 - 00019ec0f6] BRK ==> [00019ec000 - 00019ec0f6] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f5110] f5110 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048186 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff88002801f000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031954 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=eb7de102-905b-48ab-a653-344fc3e708be ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4047840k/4718592k available (5334k kernel code, 525848k absent, 144904k reserved, 3017k data, 668k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.725 MHz processor. [ 0.000954] Console: colour VGA+ 80x25 [ 0.000957] console [tty0] enabled [ 0.010000] allocated 41943040 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.45 BogoMIPS (lpj=26667250) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys devices [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU0: Thermal monitoring enabled (TM2) [ 0.010000] using mwait in idle threads. [ 0.010000] Performance Counters: Core2 events, Intel PMU driver. [ 0.010000] ... version: 2 [ 0.010000] ... bit width: 40 [ 0.010000] ... generic counters: 2 [ 0.010000] ... value mask: 000000ffffffffff [ 0.010000] ... max period: 000000007fffffff [ 0.010000] ... fixed-purpose counters: 3 [ 0.010000] ... counter mask: 0000000700000003 [ 0.010000] ACPI: Core revision 20090521 [ 0.020061] Setting APIC routing to flat [ 0.020361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.123817] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5333.34 BogoMIPS (lpj=26666700) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.281235] CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b [ 0.281242] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.290017] Brought up 2 CPUs [ 0.290020] Total of 2 processors activated (10666.79 BogoMIPS). [ 0.290065] CPU0 attaching sched-domain: [ 0.290067] domain 0: span 0-1 level MC [ 0.290069] groups: 0 1 [ 0.290073] CPU1 attaching sched-domain: [ 0.290075] domain 0: span 0-1 level MC [ 0.290077] groups: 1 0 [ 0.290133] Booting paravirtualized kernel on bare hardware [ 0.290133] regulator: core version 0.5 [ 0.290133] Time: 0:51:26 Date: 04/30/11 [ 0.290133] NET: Registered protocol family 16 [ 0.290163] ACPI: bus type pci registered [ 0.290217] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.290219] PCI: MCFG area at f0000000 reserved in E820 [ 0.291601] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.291602] PCI: Using configuration type 1 for base access [ 0.292238] bio: create slab at 0 [ 0.292238] ACPI: EC: Look up EC in DSDT [ 0.294850] ACPI: Interpreter enabled [ 0.294856] ACPI: (supports S0 S3 S4 S5) [ 0.294873] ACPI: Using IOAPIC for interrupt routing [ 0.302688] ACPI: No dock devices found. [ 0.302766] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.302843] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.302846] pci 0000:00:01.0: PME# disabled [ 0.302905] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f] [ 0.302962] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f] [ 0.303019] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f] [ 0.303068] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9205000-0xf92053ff] [ 0.303134] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9200000-0xf9203fff] [ 0.303168] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.303171] pci 0000:00:1b.0: PME# disabled [ 0.303217] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.303221] pci 0000:00:1c.0: PME# disabled [ 0.303271] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.303274] pci 0000:00:1c.4: PME# disabled [ 0.303322] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.303325] pci 0000:00:1c.5: PME# disabled [ 0.303372] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] [ 0.303429] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f] [ 0.303486] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f] [ 0.303535] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9204000-0xf92043ff] [ 0.303668] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.303671] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.303674] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.303677] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.303721] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.303726] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.303731] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.303735] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.303740] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.303744] pci 0000:00:1f.2: reg 24 io port: [0xfc00-0xfc0f] [ 0.303781] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9206000-0xf92060ff] [ 0.303792] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.303828] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707] [ 0.303832] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803] [ 0.303837] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907] [ 0.303841] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03] [ 0.303846] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f] [ 0.303850] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] [ 0.303895] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff] [ 0.303902] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.303909] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff] [ 0.303913] pci 0000:01:00.0: reg 24 io port: [0xb000-0xb07f] [ 0.303917] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.303965] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.303968] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf6ffffff] [ 0.303971] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.304005] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] [ 0.304089] pci 0000:03:00.0: reg 24 32bit mmio: [0xf9000000-0xf9001fff] [ 0.304124] pci 0000:03:00.0: PME# supported from D3hot [ 0.304129] pci 0000:03:00.0: PME# disabled [ 0.304176] pci 0000:03:00.1: reg 10 io port: [0xc000-0xc007] [ 0.304184] pci 0000:03:00.1: reg 14 io port: [0xc100-0xc103] [ 0.304192] pci 0000:03:00.1: reg 18 io port: [0xc200-0xc207] [ 0.304200] pci 0000:03:00.1: reg 1c io port: [0xc300-0xc303] [ 0.304208] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f] [ 0.304288] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.304292] pci 0000:00:1c.4: bridge 32bit mmio: [0xf9000000-0xf90fffff] [ 0.304345] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.304365] pci 0000:04:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff] [ 0.304384] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.304426] pci 0000:04:00.0: supports D1 D2 [ 0.304428] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.304433] pci 0000:04:00.0: PME# disabled [ 0.304478] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.304482] pci 0000:00:1c.5: bridge 32bit mmio: [0xf7000000-0xf8ffffff] [ 0.304523] pci 0000:05:06.0: reg 10 32bit mmio: [0xf9104000-0xf91047ff] [ 0.304529] pci 0000:05:06.0: reg 14 32bit mmio: [0xf9100000-0xf9103fff] [ 0.304567] pci 0000:05:06.0: supports D1 D2 [ 0.304568] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot [ 0.304572] pci 0000:05:06.0: PME# disabled [ 0.304606] pci 0000:00:1e.0: transparent bridge [ 0.304610] pci 0000:00:1e.0: bridge 32bit mmio: [0xf9100000-0xf91fffff] [ 0.304632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.304730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.304777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.304827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.304866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.317027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.317104] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.317179] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.317254] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.317329] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.317405] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.317483] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.317558] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.317692] SCSI subsystem initialized [ 0.317718] libata version 3.00 loaded. [ 0.317718] usbcore: registered new interface driver usbfs [ 0.317718] usbcore: registered new interface driver hub [ 0.317718] usbcore: registered new device driver usb [ 0.317718] ACPI: WMI: Mapper loaded [ 0.317718] PCI: Using ACPI for IRQ routing [ 0.340006] Bluetooth: Core ver 2.15 [ 0.340020] NET: Registered protocol family 31 [ 0.340020] Bluetooth: HCI device and connection manager initialized [ 0.340020] Bluetooth: HCI socket layer initialized [ 0.340020] NetLabel: Initializing [ 0.340020] NetLabel: domain hash size = 128 [ 0.340020] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.340031] NetLabel: unlabeled traffic allowed by default [ 0.340074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.340080] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.380048] pnp: PnP ACPI init [ 0.380060] ACPI: bus type pnp registered [ 0.382214] pnp: PnP ACPI: found 14 devices [ 0.382216] ACPI: ACPI bus type pnp unregistered [ 0.382225] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.382227] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.382230] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.382234] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.382236] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.382242] system 00:0a: ioport range 0x400-0x4bf could not be reserved [ 0.382246] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.382250] system 00:0c: iomem range 0xce000-0xcffff has been reserved [ 0.382252] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.382254] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.382256] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.382258] system 00:0c: iomem range 0xdfee0000-0xdfefffff could not be reserved [ 0.382261] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.382263] system 00:0c: iomem range 0x100000-0xdfedffff could not be reserved [ 0.382265] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.382267] system 00:0c: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.382269] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.382272] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.382274] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.382276] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.382278] system 00:0c: iomem range 0xe0000-0xeffff has been reserved [ 0.386898] AppArmor: AppArmor Filesystem Enabled [ 0.386939] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.386942] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.386945] pci 0000:00:01.0: MEM window: 0xf4000000-0xf6ffffff [ 0.386947] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.386951] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.386953] pci 0000:00:1c.0: IO window: 0xa000-0xafff [ 0.386957] pci 0000:00:1c.0: MEM window: disabled [ 0.386960] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.386963] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.386966] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.386969] pci 0000:00:1c.4: MEM window: 0xf9000000-0xf90fffff [ 0.386972] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.386976] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.386978] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.386982] pci 0000:00:1c.5: MEM window: 0xf7000000-0xf8ffffff [ 0.386985] pci 0000:00:1c.5: PREFETCH window: 0xf9300000-0xf93fffff [ 0.386989] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.386990] pci 0000:00:1e.0: IO window: disabled [ 0.386994] pci 0000:00:1e.0: MEM window: 0xf9100000-0xf91fffff [ 0.386997] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.387003] alloc irq_desc for 16 on node 0 [ 0.387005] alloc kstat_irqs on node 0 [ 0.387008] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.387011] pci 0000:00:01.0: setting latency timer to 64 [ 0.387017] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.387020] pci 0000:00:1c.0: setting latency timer to 64 [ 0.387025] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.387029] pci 0000:00:1c.4: setting latency timer to 64 [ 0.387034] alloc irq_desc for 17 on node 0 [ 0.387035] alloc kstat_irqs on node 0 [ 0.387038] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.387041] pci 0000:00:1c.5: setting latency timer to 64 [ 0.387046] pci 0000:00:1e.0: setting latency timer to 64 [ 0.387049] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.387051] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.387053] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.387055] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf6ffffff] [ 0.387057] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.387059] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.387060] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.387062] pci_bus 0000:03: resource 1 mem: [0xf9000000-0xf90fffff] [ 0.387064] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.387066] pci_bus 0000:04: resource 1 mem: [0xf7000000-0xf8ffffff] [ 0.387068] pci_bus 0000:04: resource 2 pref mem [0xf9300000-0xf93fffff] [ 0.387069] pci_bus 0000:05: resource 1 mem: [0xf9100000-0xf91fffff] [ 0.387071] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.387073] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.387097] NET: Registered protocol family 2 [ 0.387226] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.388088] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.391129] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.391576] TCP: Hash tables configured (established 524288 bind 65536) [ 0.391579] TCP reno registered [ 0.391678] NET: Registered protocol family 1 [ 0.391732] Trying to unpack rootfs image as initramfs... [ 0.501313] Switched to high resolution mode on CPU 1 [ 0.510053] Switched to high resolution mode on CPU 0 [ 0.546809] Freeing initrd memory: 8675k freed [ 0.549497] Scanning for low memory corruption every 60 seconds [ 0.549611] audit: initializing netlink socket (disabled) [ 0.549624] type=2000 audit(1304124685.540:1): initialized [ 0.557236] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.558307] VFS: Disk quotas dquot_6.5.2 [ 0.558350] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.558789] fuse init (API version 7.12) [ 0.558851] msgmni has been set to 7922 [ 0.559001] alg: No test for stdrng (krng) [ 0.559011] io scheduler noop registered [ 0.559012] io scheduler anticipatory registered [ 0.559014] io scheduler deadline registered [ 0.559047] io scheduler cfq registered (default) [ 0.559172] pci 0000:01:00.0: Boot video device [ 0.559271] alloc irq_desc for 24 on node 0 [ 0.559273] alloc kstat_irqs on node 0 [ 0.559280] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.559284] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.559374] alloc irq_desc for 25 on node 0 [ 0.559376] alloc kstat_irqs on node 0 [ 0.559381] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.559388] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.559494] alloc irq_desc for 26 on node 0 [ 0.559496] alloc kstat_irqs on node 0 [ 0.559501] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.559508] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.559610] alloc irq_desc for 27 on node 0 [ 0.559612] alloc kstat_irqs on node 0 [ 0.559617] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.559623] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.559696] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.559772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.559870] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.559873] ACPI: Power Button [PWRF] [ 0.559910] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.559912] ACPI: Power Button [PWRB] [ 0.560154] processor LNXCPU:00: registered as cooling_device0 [ 0.560157] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.560295] ACPI: SSDT 00000000dfee8300 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.560448] processor LNXCPU:01: registered as cooling_device1 [ 0.560451] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.562698] Linux agpgart interface v0.103 [ 0.562705] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.562789] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.563027] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.563777] brd: module loaded [ 0.564101] loop: module loaded [ 0.564149] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.564237] ahci 0000:03:00.0: version 3.0 [ 0.564249] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.580187] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.580190] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.580196] ahci 0000:03:00.0: setting latency timer to 64 [ 0.580317] scsi0 : ahci [ 0.580378] scsi1 : ahci [ 0.580434] ata1: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 16 [ 0.580437] ata2: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 16 [ 0.580492] ata_piix 0000:00:1f.2: version 2.13 [ 0.580499] alloc irq_desc for 19 on node 0 [ 0.580501] alloc kstat_irqs on node 0 [ 0.580505] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.580508] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.580540] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.580586] scsi2 : ata_piix [ 0.580625] scsi3 : ata_piix [ 0.581191] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.581195] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.581233] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.581237] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.581264] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.581295] scsi4 : ata_piix [ 0.581343] scsi5 : ata_piix [ 0.581813] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.581817] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.582086] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 0.582091] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.582114] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 0.582155] scsi6 : pata_jmicron [ 0.582193] scsi7 : pata_jmicron [ 0.582680] ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 17 [ 0.582682] ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 17 [ 0.583057] Fixed MDIO Bus: probed [ 0.583081] PPP generic driver version 2.4.2 [ 0.583149] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.583181] alloc irq_desc for 18 on node 0 [ 0.583183] alloc kstat_irqs on node 0 [ 0.583187] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.583203] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.583208] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.583231] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.587126] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.587135] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9205000 [ 0.610026] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.610092] usb usb1: configuration #1 chosen from 1 choice [ 0.610118] hub 1-0:1.0: USB hub found [ 0.610125] hub 1-0:1.0: 6 ports detected [ 0.610195] alloc irq_desc for 23 on node 0 [ 0.610197] alloc kstat_irqs on node 0 [ 0.610204] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.610215] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.610218] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.610247] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.614133] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.614143] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9204000 [ 0.630027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.630087] usb usb2: configuration #1 chosen from 1 choice [ 0.630114] hub 2-0:1.0: USB hub found [ 0.630121] hub 2-0:1.0: 6 ports detected [ 0.630175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.630189] uhci_hcd: USB Universal Host Controller Interface driver [ 0.630254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.630258] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.630261] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.630282] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.630301] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 0.630356] usb usb3: configuration #1 chosen from 1 choice [ 0.630374] hub 3-0:1.0: USB hub found [ 0.630379] hub 3-0:1.0: 2 ports detected [ 0.630429] alloc irq_desc for 21 on node 0 [ 0.630430] alloc kstat_irqs on node 0 [ 0.630434] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.630438] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.630440] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.630463] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.630487] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 0.630543] usb usb4: configuration #1 chosen from 1 choice [ 0.630560] hub 4-0:1.0: USB hub found [ 0.630565] hub 4-0:1.0: 2 ports detected [ 0.630610] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.630615] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.630617] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.630638] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.630657] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 0.630713] usb usb5: configuration #1 chosen from 1 choice [ 0.630730] hub 5-0:1.0: USB hub found [ 0.630735] hub 5-0:1.0: 2 ports detected [ 0.630783] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.630787] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.630789] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.630812] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.630831] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.630884] usb usb6: configuration #1 chosen from 1 choice [ 0.630904] hub 6-0:1.0: USB hub found [ 0.630908] hub 6-0:1.0: 2 ports detected [ 0.630951] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.630955] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.630958] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.630981] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.631000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 0.631054] usb usb7: configuration #1 chosen from 1 choice [ 0.631074] hub 7-0:1.0: USB hub found [ 0.631079] hub 7-0:1.0: 2 ports detected [ 0.631122] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.631127] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.631129] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.631155] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.631174] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 0.631229] usb usb8: configuration #1 chosen from 1 choice [ 0.631247] hub 8-0:1.0: USB hub found [ 0.631252] hub 8-0:1.0: 2 ports detected [ 0.631326] PNP: No PS/2 controller found. Probing ports directly. [ 0.631600] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.631605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.631660] mice: PS/2 mouse device common for all mice [ 0.631741] rtc_cmos 00:04: RTC can wake from S4 [ 0.631769] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.631791] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.631906] device-mapper: uevent: version 1.0.3 [ 0.631971] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.632015] device-mapper: multipath: version 1.1.0 loaded [ 0.632018] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.632126] cpuidle: using governor ladder [ 0.632128] cpuidle: using governor menu [ 0.632410] TCP cubic registered [ 0.632502] NET: Registered protocol family 10 [ 0.632821] lo: Disabled Privacy Extensions [ 0.633028] NET: Registered protocol family 17 [ 0.633041] Bluetooth: L2CAP ver 2.13 [ 0.633043] Bluetooth: L2CAP socket layer initialized [ 0.633045] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.633047] Bluetooth: SCO socket layer initialized [ 0.633067] Bluetooth: RFCOMM TTY layer initialized [ 0.633069] Bluetooth: RFCOMM socket layer initialized [ 0.633070] Bluetooth: RFCOMM ver 1.11 [ 0.634840] PM: Resume from disk failed. [ 0.634851] registered taskstats version 1 [ 0.634966] Magic number: 7:577:861 [ 0.635040] rtc_cmos 00:04: setting system clock to 2011-04-30 00:51:27 UTC (1304124687) [ 0.635042] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.635044] EDD information not available. [ 0.930181] ata2: SATA link down (SStatus 0 SControl 300) [ 1.090067] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.090220] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.110023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.110889] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB02, max UDMA/100, ATAPI AN [ 1.111202] ata5.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133 [ 1.111205] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.111971] ata1.00: configured for UDMA/100 [ 1.124064] ata6.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133 [ 1.124067] ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.131921] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB02 PQ: 0 ANSI: 5 [ 1.134746] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.134748] Uniform CD-ROM driver Revision: 3.20 [ 1.134826] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.134868] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.150601] ata6.00: configured for UDMA/133 [ 1.151242] ata5.00: configured for UDMA/133 [ 1.320027] usb 8-1: new full speed USB device using uhci_hcd and address 2 [ 1.440065] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.440082] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.440112] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.440125] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.477234] usb 8-1: configuration #1 chosen from 1 choice [ 1.480207] hub 8-1:1.0: USB hub found [ 1.482185] hub 8-1:1.0: 4 ports detected [ 1.488506] ata4.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133 [ 1.488509] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.493607] ata4.01: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133 [ 1.493610] ata4.01: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.510228] ata3.00: HPA unlocked: 976771055 -> 976773168, native 976773168 [ 1.510237] ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133 [ 1.510239] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.516081] ata3.01: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133 [ 1.516084] ata3.01: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.530451] ata4.00: configured for UDMA/133 [ 1.552272] ata3.00: configured for UDMA/133 [ 1.570757] ata4.01: configured for UDMA/133 [ 1.592583] ata3.01: configured for UDMA/133 [ 1.592652] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 1.592749] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.592758] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.592794] sd 2:0:0:0: [sda] Write Protect is off [ 1.592796] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.592806] scsi 2:0:1:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5 [ 1.592814] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.592884] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 1.592909] sda: [ 1.592934] scsi 3:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5 [ 1.592999] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.593006] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.593035] sd 3:0:0:0: [sdc] Write Protect is off [ 1.593037] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.593060] scsi 3:0:1:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5 [ 1.593063] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.593139] sd 3:0:1:0: Attached scsi generic sg4 type 0 [ 1.593151] sdc: [ 1.593163] sd 3:0:1:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.593255] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5 [ 1.593328] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 1.593351] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.593382] sd 4:0:0:0: [sde] Write Protect is off [ 1.593384] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.593401] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.593479] sde: [ 1.593585] scsi 5:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5 [ 1.593660] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 1.593682] sd 5:0:0:0: [sdf] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.593713] sd 5:0:0:0: [sdf] Write Protect is off [ 1.593715] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.593734] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.593810] sdf: sdc1 [ 1.595843] sd 3:0:1:0: [sdd] Write Protect is off [ 1.595847] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.595869] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.596007] sdd: [ 1.596014] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.596480] sdf1 [ 1.596642] sd 5:0:0:0: [sdf] Attached SCSI disk [ 1.599033] sd 2:0:1:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.599036] sda1 sda2 < sde1 [ 1.600106] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.600915] sdd1 [ 1.601068] sd 3:0:1:0: [sdd] Attached SCSI disk [ 1.618200] sda5 > [ 1.618401] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.618421] sd 2:0:1:0: [sdb] Write Protect is off [ 1.618423] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.618440] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.618517] sdb: sdb1 [ 1.623510] sd 2:0:1:0: [sdb] Attached SCSI disk [ 1.761498] Freeing unused kernel memory: 668k freed [ 1.761621] Write protecting the kernel read-only data: 7600k [ 1.763183] usb 8-1.1: new low speed USB device using uhci_hcd and address 3 [ 1.859286] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.859305] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.859352] r8169 0000:04:00.0: setting latency timer to 64 [ 1.859406] alloc irq_desc for 28 on node 0 [ 1.859408] alloc kstat_irqs on node 0 [ 1.859421] r8169 0000:04:00.0: irq 28 for MSI/MSI-X [ 1.859857] eth0: RTL8168b/8111b at 0xffffc9000512a000, 00:1d:7d:00:98:ce, XID 38000000 IRQ 28 [ 1.873085] ohci1394 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.873303] Floppy drive(s): fd0 is 1.44M [ 1.908597] FDC 0 is a post-1991 82077 [ 1.930132] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9104000-f91047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.966912] md: bind [ 1.970562] md: bind [ 1.971237] usb 8-1.1: configuration #1 chosen from 1 choice [ 1.977628] usbcore: registered new interface driver hiddev [ 1.977688] usbcore: registered new interface driver usbhid [ 1.977690] usbhid: v2.6:USB HID core driver [ 2.002457] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.1/8-1.1:1.0/input/input3 [ 2.002507] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1.1/input0 [ 2.041311] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.1/8-1.1:1.1/input/input4 [ 2.041373] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1.1/input1 [ 2.053182] usb 8-1.4: new full speed USB device using uhci_hcd and address 4 [ 2.226241] usb 8-1.4: configuration #1 chosen from 1 choice [ 2.233421] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1.4/8-1.4:1.0/input/input5 [ 2.233474] generic-usb 0003:1532:0016.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1d.2-1.4/input0 [ 3.171712] md: bind [ 3.233392] md: bind [ 3.235407] xor: automatically using best checksumming function: generic_sse [ 3.280002] generic_sse: 9911.600 MB/sec [ 3.280004] xor: using function: generic_sse (9911.600 MB/sec) [ 3.280423] async_tx: api initialized (async) [ 3.301334] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00cebb0f00001a4d] [ 3.450024] raid6: int64x1 2114 MB/s [ 3.620016] raid6: int64x2 2856 MB/s [ 3.790019] raid6: int64x4 2026 MB/s [ 3.960020] raid6: int64x8 1837 MB/s [ 4.130012] raid6: sse2x1 4890 MB/s [ 4.300007] raid6: sse2x2 5975 MB/s [ 4.470008] raid6: sse2x4 8059 MB/s [ 4.470010] raid6: using algorithm sse2x4 (8059 MB/s) [ 4.471984] md: raid6 personality registered for level 6 [ 4.471986] md: raid5 personality registered for level 5 [ 4.471987] md: raid4 personality registered for level 4 [ 4.472077] raid5: device sdb1 operational as raid disk 0 [ 4.472079] raid5: device sdf1 operational as raid disk 4 [ 4.472081] raid5: device sdd1 operational as raid disk 2 [ 4.472083] raid5: device sdc1 operational as raid disk 1 [ 4.472412] raid5: allocated 5332kB for md0 [ 4.472434] raid5: raid level 5 set md0 active with 4 out of 5 devices, algorithm 2 [ 4.472468] RAID5 conf printout: [ 4.472469] --- rd:5 wd:4 [ 4.472470] disk 0, o:1, dev:sdb1 [ 4.472472] disk 1, o:1, dev:sdc1 [ 4.472474] disk 2, o:1, dev:sdd1 [ 4.472475] disk 4, o:1, dev:sdf1 [ 4.472499] md0: detected capacity change from 0 to 3000614518784 [ 4.473230] md0: unknown partition table [ 5.340709] device-mapper: dm-raid45: initialized v0.2594b [ 5.348094] md: linear personality registered for level -1 [ 5.349646] md: multipath personality registered for level -4 [ 5.351033] md: raid0 personality registered for level 0 [ 5.353195] md: raid1 personality registered for level 1 [ 5.358617] md: raid10 personality registered for level 10 [ 5.596562] PM: Starting manual resume from disk [ 5.596566] PM: Resume from partition 8:5 [ 5.596567] PM: Checking hibernation image. [ 5.596737] PM: Resume from disk failed. [ 5.624087] kjournald starting. Commit interval 5 seconds [ 5.624099] EXT3-fs: mounted filesystem with ordered data mode. [ 6.286058] type=1505 audit(1304124693.145:2): operation="profile_load" pid=809 name=/usr/share/gdm/guest-session/Xsession [ 6.294566] type=1505 audit(1304124693.155:3): operation="profile_load" pid=810 name=/sbin/dhclient3 [ 6.295106] type=1505 audit(1304124693.155:4): operation="profile_load" pid=810 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.295395] type=1505 audit(1304124693.155:5): operation="profile_load" pid=810 name=/usr/lib/connman/scripts/dhclient-script [ 6.320650] type=1505 audit(1304124693.185:6): operation="profile_load" pid=811 name=/usr/bin/evince [ 6.329265] type=1505 audit(1304124693.185:7): operation="profile_load" pid=811 name=/usr/bin/evince-previewer [ 6.334392] type=1505 audit(1304124693.194:8): operation="profile_load" pid=811 name=/usr/bin/evince-thumbnailer [ 6.363130] type=1505 audit(1304124693.225:9): operation="profile_load" pid=813 name=/usr/lib/cups/backend/cups-pdf [ 6.363792] type=1505 audit(1304124693.225:10): operation="profile_load" pid=813 name=/usr/sbin/cupsd [ 6.441176] type=1505 audit(1304124693.304:11): operation="profile_load" pid=814 name=/usr/sbin/mysqld [ 28.666234] udev: starting version 147 [ 28.685951] Adding 11880028k swap on /dev/sda5. Priority:-1 extents:1 across:11880028k [ 28.745358] lp: driver loaded but no devices found [ 28.822725] nvidia: module license 'NVIDIA' taints kernel. [ 28.822729] Disabling lock debugging due to kernel taint [ 28.936574] EXT3 FS on sda1, internal journal [ 28.946706] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.949462] parport_pc 00:09: reported by Plug and Play ACPI [ 28.949503] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 29.030122] lp0: using parport0 (interrupt-driven). [ 29.078972] ppdev: user-space parallel port driver [ 29.079442] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 29.079448] nvidia 0000:01:00.0: setting latency timer to 64 [ 29.079552] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 29.131079] alloc irq_desc for 22 on node 0 [ 29.131081] alloc kstat_irqs on node 0 [ 29.131087] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 29.131126] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 29.256275] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 29.364453] __ratelimit: 6 callbacks suppressed [ 29.364456] type=1505 audit(1304124716.224:14): operation="profile_replace" pid=1497 name=/usr/share/gdm/guest-session/Xsession [ 29.365649] type=1505 audit(1304124716.224:15): operation="profile_replace" pid=1498 name=/sbin/dhclient3 [ 29.366186] type=1505 audit(1304124716.224:16): operation="profile_replace" pid=1498 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 29.366476] type=1505 audit(1304124716.224:17): operation="profile_replace" pid=1498 name=/usr/lib/connman/scripts/dhclient-script [ 29.368797] type=1505 audit(1304124716.224:18): operation="profile_replace" pid=1499 name=/usr/bin/evince [ 29.378052] type=1505 audit(1304124716.234:19): operation="profile_replace" pid=1499 name=/usr/bin/evince-previewer [ 29.383334] type=1505 audit(1304124716.244:20): operation="profile_replace" pid=1499 name=/usr/bin/evince-thumbnailer [ 29.390196] type=1505 audit(1304124716.254:21): operation="profile_replace" pid=1501 name=/usr/lib/cups/backend/cups-pdf [ 29.390827] type=1505 audit(1304124716.254:22): operation="profile_replace" pid=1501 name=/usr/sbin/cupsd [ 29.434745] type=1505 audit(1304124716.294:23): operation="profile_replace" pid=1502 name=/usr/sbin/mysqld [ 29.495670] kjournald starting. Commit interval 5 seconds [ 29.495679] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 29.572233] EXT3 FS on dm-0, internal journal [ 29.572238] EXT3-fs: mounted filesystem with ordered data mode. [ 29.578331] r8169: eth0: link up [ 29.578317] r8169: eth0: link up [ 30.203666] usplash:506 freeing invalid memtype ffffffffe0000000-fffffffff0000000 [ 32.669083] CPU0 attaching NULL sched-domain. [ 32.669087] CPU1 attaching NULL sched-domain. [ 32.710634] CPU0 attaching sched-domain: [ 32.710637] domain 0: span 0-1 level MC [ 32.710639] groups: 0 1 [ 32.710643] domain 1: span 0-1 level CPU [ 32.710645] groups: 0-1 (__cpu_power = 2048) [ 32.710648] CPU1 attaching sched-domain: [ 32.710650] domain 0: span 0-1 level MC [ 32.710652] groups: 1 0 [ 32.710654] domain 1: span 0-1 level CPU [ 32.710656] groups: 0-1 (__cpu_power = 2048) [ 37.936694] CPU0 attaching NULL sched-domain. [ 37.936698] CPU1 attaching NULL sched-domain. [ 37.961321] CPU0 attaching sched-domain: [ 37.961324] domain 0: span 0-1 level MC [ 37.961326] groups: 0 1 [ 37.961330] CPU1 attaching sched-domain: [ 37.961331] domain 0: span 0-1 level MC [ 37.961333] groups: 1 0 [ 40.370035] eth0: no IPv6 routers present [ 44.725113] usb 8-1.4: USB disconnect, address 4