patched vsh.self for reActPSN 2.0 package, all tested working very well.

Patch to allow verify unsigned act.dat and *.rif files for reActPSN. 

Files must be replaced in /dev_blind/vsh/module/ using either FTP or file manager. 

copy this package to USB media.

Run dev_blind
choice patched vsh.self for your cfw (cfw rebug has 3 files)
copy vsh.self to /dev_blind/vsh/module/vsh.self (overwrite!)
reboot

Note: REBUG have 3 vsh.self files: vsh.self vsh.self.cexsp vsh.self.swp
         your must run rebug_selector or reflash rebug cfw, make sure vsh.self are their orignal name.



more information for new PSN function patching..

=================patch 8byte in vsh.self for reActPSN==========================================
version       addr       old data          new data                   function
3.55retail   0x30b230  4b cf 5b 45  ->   38 60 00 00     // fixed  allow unsigned act.dat *.rif
3.55retail   0x30ac90  48 31 b4 65  ->   38 60 00 00     // fixed  act.dat missing after reboot

3.55debug    0x312308  4b ce ea 6d  ->   38 60 00 00     // fixed  allow unsigned act.dat *.rif
3.55debug    0x311d68  48 31 b7 d5  ->   38 60 00 00     // fixed  act.dat missing after reboot

3.41retail   0x305dc4  4b cf af b1  ->   38 60 00 00     // fixed  allow unsigned act.dat *.rif
3.41retail   0x305824  48 31 43 ad  ->   38 60 00 00     // fixed  act.dat missing after reboot

3.41debug    0x30cedc  4b cf 3e 99  ->   38 60 00 00     // fixed  allow unsigned act.dat *.rif
3.41debug    0x30c93c  48 31 47 1d  ->   38 60 00 00     // fixed  act.dat missing after reboot



==============patch vsh.self by youself for new CFW=====
run dev_blind
copy /dev_blind/vsh/module/vsh.self to d:/vsh/vsh.self.0
cd d:/vsh
unself vsh.self.0 vsh.self.elf

hexedit vsh.self.elf
  if *(addr)==old data    then *(addr)=new data
  only 2 addr, 8byte data fixed in one vsh.self.elf

self_rebuilder vsh.self.elf vsh.self vsh.self.0
copy vsh.self to /dev_blind/vsh/module/vsh.self

note: REBUG have 3 vsh.self files: vsh.self vsh.self.cexsp vsh.self.swp
         your must run rebug_selector or reflash rebug cfw, make sure vsh.self are their orignal name.


==========Custom Firmware installation steps:===========================

  1: Plug a USB stick into your computer
  2: Copy the custom firmware file that you downloaded to a USB memory
     stick as /PS3/UPDATE/PS3UPDAT.PUP
  3: Plug the USB stick into your PS3
  4: Navigate to Settings Tab
  5: Choose System Update
  6: Choose Update via Storage Media
  7: It will say it found Version 3.55
  8: Choose OK
  9: Accept Conditions and Follow the instructions
 
If the steps above did not work for you, You will have to do a recovery menu mode installation:

  1: Plug a USB stick into your computer
  2: Copy the custom firmware file that you downloaded to a USB memory
     stick as /PS3/UPDATE/PS3UPDAT.PUP  
  3: Plug the USB stick into your PS3
  4: Power down the PS3 through the menu
  5: Now press and HOLD the power button, the system will startup and shutdown again
  6: Release the power button, then press & HOLD power again, 
     you'll hear one beep followed by two consecutive beeps
  7: Release power then follow the on-screen instructions. You're now in the recovery menu
  8: Connect the USB device and select "System Update."
  9: Accept Conditions and Follow the instructions