Marvell>> boot (Re)start USB... USB: scanning bus for devices... 3 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found reading /uImage .................................................................................................................. 3123729 bytes read reading /uInitrd .................................................................................................................. 7128379 bytes read ## Booting image at 00800000 ... Image Name: Linux-4.1.0-kirkwood-tld-2 Created: 2015-08-12 8:05:15 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3123665 Bytes = 3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 01100000 ... Image Name: initramfs-4.1.0-kirkwood-tld-2 Created: 2015-08-12 8:05:37 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7128315 Bytes = 6.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.0-kirkwood-tld-2 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREE5 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: Zyxel NSA320S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=6 rootfstype=ext4 mtdparts=o) [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 243724K/262144K available (5930K kernel code, 563K rwdata, 1980K rodata, 288K init, 302K b) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07c1d9c (7912 kB) [ 0.000000] .init : 0xc07c2000 - 0xc080a000 ( 288 kB) [ 0.000000] .data : 0xc080a000 - 0xc0896f0c ( 564 kB) [ 0.000000] .bss : 0xc0896f0c - 0xc08e2a94 ( 303 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000008] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000441] Console: colour dummy device 80x30 [ 0.000474] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064) [ 0.090096] pid_max: default: 32768 minimum: 301 [ 0.090231] Security Framework initialized [ 0.090368] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090393] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.091203] Initializing cgroup subsys blkio [ 0.091235] Initializing cgroup subsys devices [ 0.091262] Initializing cgroup subsys freezer [ 0.091297] Initializing cgroup subsys net_cls [ 0.091399] CPU: Testing write buffer coherency: ok [ 0.091836] Setting up static identity map for 0x8200 - 0x8258 [ 0.092187] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 [ 0.096475] devtmpfs: initialized [ 0.103789] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.104291] prandom: seed boundary self test passed [ 0.108795] prandom: 100 self tests passed [ 0.108939] pinctrl core: initialized pinctrl subsystem [ 0.110519] NET: Registered protocol family 16 [ 0.110985] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.140106] cpuidle: using governor ladder [ 0.170104] cpuidle: using governor menu [ 0.170597] Feroceon L2: Enabling L2 [ 0.170642] Feroceon L2: Cache support initialised. [ 0.171077] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not [ 0.177179] No ATAGs? [ 0.211751] vgaarb: loaded [ 0.212188] usbcore: registered new interface driver usbfs [ 0.212281] usbcore: registered new interface driver hub [ 0.212355] usbcore: registered new device driver usb [ 0.213619] Switched to clocksource orion_clocksource [ 0.275134] NET: Registered protocol family 2 [ 0.275980] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.276023] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.276057] TCP: Hash tables configured (established 2048 bind 2048) [ 0.276126] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.276151] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.276367] NET: Registered protocol family 1 [ 0.276794] RPC: Registered named UNIX socket transport module. [ 0.276807] RPC: Registered udp transport module. [ 0.276816] RPC: Registered tcp transport module. [ 0.276824] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.277121] Unpacking initramfs... [ 1.001324] Freeing initrd memory: 6964K (c1100000 - c17cd000) [ 1.001487] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.003065] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.003099] Initialise system trusted keyring [ 1.003227] audit: initializing netlink subsys (disabled) [ 1.003282] audit: type=2000 audit(0.990:1): initialized [ 1.004209] zpool: loaded [ 1.004228] zbud: loaded [ 1.004566] VFS: Disk quotas dquot_6.6.0 [ 1.004641] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.005301] NFS: Registering the id_resolver key type [ 1.005358] Key type id_resolver registered [ 1.005369] Key type id_legacy registered [ 1.005400] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.005418] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.005655] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.006189] Key type big_key registered [ 1.010410] alg: No test for stdrng (krng) [ 1.010459] Key type asymmetric registered [ 1.010480] Asymmetric key parser 'x509' registered [ 1.010573] bounce: pool size: 64 pages [ 1.010665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.010684] io scheduler noop registered [ 1.010699] io scheduler deadline registered [ 1.010751] io scheduler cfq registered (default) [ 1.012254] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 1.013034] irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated [ 1.013517] irq: Cannot allocate irq_descs @ IRQ65, assuming pre-allocated [ 1.014623] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00 [ 1.014645] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.014661] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 1.014676] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.015114] PCI: bus0: Fast back to back transfers disabled [ 1.015144] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.015373] PCI: bus1: Fast back to back transfers enabled [ 1.015474] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.015787] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.053701] mv_xor f1060800.xor: Marvell XOR: ( xor cpy ) [ 1.093685] mv_xor f1060800.xor: Marvell XOR: ( xor cpy ) [ 1.093871] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.133682] mv_xor f1060900.xor: Marvell XOR: ( xor cpy ) [ 1.173682] mv_xor f1060900.xor: Marvell XOR: ( xor cpy ) [ 1.174124] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.175610] console [ttyS0] disabled [ 1.175675] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 10416666) is a 16550A [ 1.830559] console [ttyS0] enabled [ 1.835454] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1 [ 1.841778] nand: Eon NAND 128MiB 3,3V 8-bit [ 1.846067] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.853605] Scanning device for bad blocks [ 1.862817] Bad eraseblock 100 at 0x000000c80000 [ 1.872489] Bad eraseblock 200 at 0x000001900000 [ 1.918768] 2 cmdlinepart partitions found on MTD device orion_nand [ 1.925027] Creating 2 MTD partitions on "orion_nand": [ 1.930144] 0x000000000000-0x000000100000 : "uboot" [ 1.936239] 0x000000100000-0x000000180000 : "uboot_env" [ 1.943685] libphy: Fixed MDIO Bus: probed [ 1.948116] libphy: orion_mdio_bus: probed [ 1.958627] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 2.043925] mv643xx_eth: Set the PHY to fix link down [ 2.049603] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 10:7b:ef:be:c4:1b [ 2.058808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.065360] ehci-pci: EHCI PCI platform driver [ 2.069866] ehci-orion: EHCI orion driver [ 2.074087] orion-ehci f1050000.ehci: EHCI Host Controller [ 2.079578] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 2.087440] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 2.103661] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 2.109892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.116684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.123898] usb usb1: Product: EHCI Host Controller [ 2.128759] usb usb1: Manufacturer: Linux 4.1.0-kirkwood-tld-2 ehci_hcd [ 2.135362] usb usb1: SerialNumber: f1050000.ehci [ 2.140882] hub 1-0:1.0: USB hub found [ 2.144710] hub 1-0:1.0: 1 port detected [ 2.149631] mousedev: PS/2 mouse device common for all mice [ 2.155684] i2c /dev entries driver [ 2.161816] ht1382 0-0068: rtc core: registered ht1382 as rtc0 [ 2.170275] hidraw: raw HID events driver (C) Jiri Kosina [ 2.176075] drop_monitor: Initializing network drop monitor service [ 2.182600] NET: Registered protocol family 17 [ 2.187187] Key type dns_resolver registered [ 2.192354] Loading compiled-in X.509 certificates [ 2.197188] registered taskstats version 1 [ 2.220058] Key type encrypted registered [ 2.225828] ht1382 0-0068: setting system clock to 2015-08-15 13:52:31 UTC (1439646751) [ 2.236364] Freeing unused kernel memory: 288K (c07c2000 - c080a000) Loading, please wait... [ 2.316921] systemd-udevd[73]: starting version 215 [ 2.334097] random: systemd-udevd urandom read with 4 bits of entropy available [ 2.463792] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 2.518837] SCSI subsystem initialized [ 2.576378] sata_mv f1080000.sata: slots 32 ports 2 [ 2.623869] scsi host0: sata_mv [ 2.628467] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.640123] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.653360] scsi host1: sata_mv [ 2.656580] usb 1-1: Product: USB2.0 Hub [ 2.664506] hub 1-1:1.0: USB hub found [ 2.671072] ata1: SATA max UDMA/133 irq 32 [ 2.675258] hub 1-1:1.0: 4 ports detected [ 2.697743] ata2: SATA max UDMA/133 irq 32 [ 2.953952] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 3.066075] usb 1-1.1: New USB device found, idVendor=090c, idProduct=1000 [ 3.072937] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.080252] usb 1-1.1: Product: USB Flash Disk [ 3.084698] usb 1-1.1: Manufacturer: General [ 3.088948] usb 1-1.1: SerialNumber: 043D6THDFZBOT81M [ 3.104683] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 3.111287] scsi host2: usb-storage 1-1.1:1.0 [ 3.117524] usbcore: registered new interface driver usb-storage [ 3.126795] usbcore: registered new interface driver uas [ 3.203677] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.243701] ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 3.250379] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.293710] ata1.00: configured for UDMA/133 [ 3.314001] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5 [ 3.673668] ata2: SATA link down (SStatus 0 SControl F300) [ 3.705896] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.713666] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.722512] sd 0:0:0:0: [sda] Write Protect is off [ 3.727509] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.761536] sda: sda1 < sda5 > [ 3.767024] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.776051] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.367059] scsi 2:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4 [ 4.381140] sd 2:0:0:0: [sdb] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 4.388947] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.400227] sd 2:0:0:0: [sdb] Write Protect is off [ 4.406242] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.425100] sdb: sdb1 sdb2 sdb3 [ 4.437882] sd 2:0:0:0: [sdb] Attached SCSI removable disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /s[ 9.997266] PM: Starting manual resume from disk cripts/local-premount ... done. Begin: Checking root file system ... fsck from util-linux 2.25.2 rootfs: clean, 80794/456960 files, 311276/1827328 blocks done. [ 10.279624] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 11.712949] systemd-udevd[287]: starting version 215 . ok [....] Synthesizing the initial hotplug events...[ 12.017630] input: gpio_keys as /devices/platform/gpio_keys/i0 done. [....] Waiting for /dev to be fully populated...[ 12.275201] orion_wdt: Initial timeout 25 sec [ 12.334066] random: nonblocking pool is initialized [ 12.592800] md: bind done. [....] Generating udev events for MD arrays...done. [....] Setting parameters of disc: (none). ok [....] Activating swap...[ 14.070370] Adding 262140k swap on /dev/sdb2. Priority:-1 extents:1 across:262140k FS done. [ 14.198548] EXT4-fs (sdb3): re-mounted. Opts: (null) [....] Checking root file system...fsck from util-linux 2.25.2 rootfs: clean, 80794/456960 files, 311276/1827328 blocks done. [ 14.414907] EXT4-fs (sdb3): re-mounted. Opts: (null) [....] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.25.2 done. [....] Loading kernel modules...done. [....] Cleaning up temporary files... /tmp. ok [....] Mounting local filesystems...done. [....] Activating swapfile swap...done. [....] Cleaning up temporary files.... ok [....] Setting kernel variables ...done. [ 17.246019] NET: Registered protocol family 10 [ 17.424464] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 17.430793] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.676299] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 19.686137] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/5c:f4:ab:e3:e6:1e Sending on LPF/eth0/5c:f4:ab:e3:e6:1e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.1.1 Reloading /etc/samba/smb.conf: smbd. bound to 192.168.1.168 -- renewal in 20636 seconds. done. [....] Starting rpcbind daemon.... ok [....] Starting NFS common utilities: statd idmapd. ok [....] Cleaning up temporary files.... ok [....] Setting sensors limits. ok INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting NFS common utilities: statd idmapd. ok [....] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting NetBIOS name server: nmbd. ok [....] Starting system logging: syslog-ng. ok [....] Starting system message bus: dbus. ok [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok [....] Starting MD monitoring service: mdadm --monitor. ok [....] Starting NTP server: ntpd. ok [....] Not starting p910nd daemon. Please edit /etc/default/p910nd first. ... (warning). [....] Starting OpenBSD Secure Shell server: sshd. ok [....] Starting SMB/CIFS daemon: smbd. ok Debian GNU/Linux 8 debianNSA320s ttyS0 debianNSA320s login: