Jan 14 02:31:42 linux-test kernel: ath9k 0000:02:00.0: enabling bus mastering
Jan 14 02:31:42 linux-test kernel: ath: phy8: serialize_regmode is 0
Jan 14 02:31:42 linux-test kernel: ath: phy8: UNDEFINED -> AWAKE
Jan 14 02:31:42 linux-test kernel: ath: phy8: Eeprom VER: 2, REV: 0
Jan 14 02:31:42 linux-test kernel: ath: phy8: Initialize ANI
Jan 14 02:31:42 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:42 linux-test kernel: ath: phy8: TX streams 3, RX streams: 3
Jan 14 02:31:42 linux-test kernel: ath: phy8: TX streams 3, RX streams: 3
Jan 14 02:31:42 linux-test kernel: ath: EEPROM regdomain: 0x0
Jan 14 02:31:42 linux-test kernel: ath: EEPROM indicates default country code should be used
Jan 14 02:31:42 linux-test kernel: ath: doing EEPROM country->regdmn map search
Jan 14 02:31:42 linux-test kernel: ath: country maps to regdmn code: 0x3a
Jan 14 02:31:42 linux-test kernel: ath: Country alpha2 being used: US
Jan 14 02:31:42 linux-test kernel: ath: Regpair used: 0x3a
Jan 14 02:31:42 linux-test kernel: ------------[ cut here ]------------
Jan 14 02:31:42 linux-test kernel: WARNING: CPU: 3 PID: 334 at /home/sujith/dev/wireless-testing/net/wireless/reg.c:1388 wiphy_apply_custom_regulatory+0x1b9/0x1f0 [cfg80211]()
Jan 14 02:31:42 linux-test kernel: wiphy should have REGULATORY_CUSTOM_REG
Jan 14 02:31:42 linux-test kernel: Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath ctr ccm arc4 x86_pkg_temp_thermal mac80211 coretemp crc32c_intel btusb ghash_clmulni_intel bluetooth i915 cryptd evdev mic...go_bit intel_agp i
Jan 14 02:31:42 linux-test kernel: CPU: 3 PID: 334 Comm: insmod Tainted: P        W  O 3.13.0-rc7-wl-debug #193
Jan 14 02:31:42 linux-test kernel: Hardware name: FUJITSU LIFEBOOK AH531/FJNBB0F, BIOS 1.30 05/28/2012
Jan 14 02:31:42 linux-test kernel:  0000000000000009 ffff88006ba559b8 ffffffff81490972 ffff88006ba55a00
Jan 14 02:31:42 linux-test kernel:  ffff88006ba559f0 ffffffff8104d3dd ffff88006efba1b8 ffff8800567e0420
Jan 14 02:31:42 linux-test kernel:  ffffffffa0888500 ffff8800567e09e0 ffff88006efba1b8 ffff88006ba55a50
Jan 14 02:31:42 linux-test kernel: Call Trace:
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81490972>] dump_stack+0x4e/0x7a
Jan 14 02:31:42 linux-test kernel:  [<ffffffff8104d3dd>] warn_slowpath_common+0x7d/0xa0
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa0888500>] ? ath9k_dump_btcoex+0x500/0x500 [ath9k]
Jan 14 02:31:42 linux-test kernel:  [<ffffffff8104d44c>] warn_slowpath_fmt+0x4c/0x50
Jan 14 02:31:42 linux-test kernel:  [<ffffffff8148c01b>] ? printk+0x54/0x56
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa042e1e9>] wiphy_apply_custom_regulatory+0x1b9/0x1f0 [cfg80211]
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa0888500>] ? ath9k_dump_btcoex+0x500/0x500 [ath9k]
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa0233a0f>] ath_regd_init+0x9f/0x1a0 [ath]
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa0889b01>] ath9k_init_device+0xac1/0xea0 [ath9k]
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa0898445>] ath_pci_probe+0x235/0x320 [ath9k]
Jan 14 02:31:42 linux-test kernel:  [<ffffffff8109a12d>] ? trace_hardirqs_on+0xd/0x10
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81497b62>] ? _raw_spin_unlock_irqrestore+0x42/0x70
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81288965>] local_pci_probe+0x45/0xa0
Jan 14 02:31:42 linux-test kernel:  [<ffffffff812880e5>] ? pci_match_device+0xc5/0xd0
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81288a91>] pci_device_probe+0xd1/0x130
Jan 14 02:31:42 linux-test kernel:  [<ffffffff813307dd>] driver_probe_device+0xfd/0x230
Jan 14 02:31:42 linux-test kernel:  [<ffffffff813309e3>] __driver_attach+0x93/0xa0
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81330950>] ? __device_attach+0x40/0x40
Jan 14 02:31:42 linux-test kernel:  [<ffffffff8132e8ab>] bus_for_each_dev+0x6b/0xb0
Jan 14 02:31:42 linux-test kernel:  [<ffffffff8133022e>] driver_attach+0x1e/0x20
Jan 14 02:31:42 linux-test kernel:  [<ffffffff8132fe68>] bus_add_driver+0x178/0x230
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa02d8000>] ? 0xffffffffa02d7fff
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81331004>] driver_register+0x64/0xf0
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa02d8000>] ? 0xffffffffa02d7fff
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81288250>] __pci_register_driver+0x60/0x70
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa0898663>] ath_pci_init+0x23/0x30 [ath9k]
Jan 14 02:31:42 linux-test kernel:  [<ffffffffa02d8009>] ath9k_init+0x9/0x3b [ath9k]
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81000332>] do_one_initcall+0x112/0x170
Jan 14 02:31:42 linux-test kernel:  [<ffffffff810957cf>] ? up_read+0x1f/0x40
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81075fce>] ? __blocking_notifier_call_chain+0x5e/0x70
Jan 14 02:31:42 linux-test kernel:  [<ffffffff810cd313>] load_module+0xef3/0x11b0
Jan 14 02:31:42 linux-test kernel:  [<ffffffff810ca230>] ? store_uevent+0x40/0x40
Jan 14 02:31:42 linux-test kernel:  [<ffffffff810cd71e>] SyS_finit_module+0x7e/0x80
Jan 14 02:31:42 linux-test kernel:  [<ffffffff81499452>] system_call_fastpath+0x16/0x1b
Jan 14 02:31:42 linux-test kernel: ---[ end trace 367422a0eb6f9209 ]---
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5180 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5200 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5220 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5240 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5260 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5280 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5300 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5320 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5500 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5540 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5560 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5600 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5620 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5660 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5680 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits it
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5745 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5765 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5785 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5805 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5825 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: ath: phy8: tx DMA: 512 buffers 1 desc/buf
Jan 14 02:31:42 linux-test kernel: ath: phy8: tx DMA map: ffff880056800000 (65536) -> 56800000 (65536)
Jan 14 02:31:42 linux-test kernel: ath: phy8: beacon DMA: 8 buffers 1 desc/buf
Jan 14 02:31:42 linux-test kernel: ath: phy8: beacon DMA map: ffff880066f55000 (1024) -> 66f55000 (1024)
Jan 14 02:31:42 linux-test kernel: cfg80211: Ignoring regulatory request set by core since the driver uses its own custom regulatory domain
Jan 14 02:31:42 linux-test kernel: ieee80211 phy8: Selected rate control algorithm 'minstrel_ht'
Jan 14 02:31:42 linux-test kernel: cfg80211: Calling CRDA for country: US
Jan 14 02:31:42 linux-test kernel: ieee80211 phy8: Atheros AR9300 Rev:4 mem=0xffffc90007440000, irq=19
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 2467 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 2472 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 2484 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5180 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5200 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5220 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5240 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5260 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5280 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5300 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5320 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5500 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5520 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5540 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5560 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5580 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5600 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5620 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5640 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5660 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5680 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Disabling freq 5700 MHz for good
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5745 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5765 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5785 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5805 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Updating information on frequency 5825 MHz with regulatory rule:
Jan 14 02:31:42 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211: Regulatory domain changed to country: US
Jan 14 02:31:42 linux-test kernel: cfg80211:  DFS Master region: unset
Jan 14 02:31:42 linux-test kernel: cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 14 02:31:42 linux-test kernel: cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Jan 14 02:31:42 linux-test kernel: cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jan 14 02:31:43 linux-test kernel: ath: phy8: Starting driver with initial channel: 2412 MHz
Jan 14 02:31:43 linux-test kernel: ath: phy8: ver 448.4 opmode 0 chan 2412 Mhz
Jan 14 02:31:43 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: Attach a VIF of type: 2
Jan 14 02:31:43 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:43 linux-test kernel: ath: phy8: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Configure tx [queue/halq] [2/2], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Configure tx [queue/halq] [3/3], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Monitor mode is disabled
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set channel: 2412 MHz width: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:43 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Reset to 2412 MHz, HT40: 0 fastcc: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 2412 Mhz
Jan 14 02:31:43 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Restore history: opmode 2 chan 2412 Mhz is_scanning=0 ofdm:3 cck:2
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set power: 30
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set HW RX filter: 0x207
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set HW RX filter: 0x207
Jan 14 02:31:43 linux-test kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set HW RX filter: 0x207
Jan 14 02:31:43 linux-test kernel: ath: phy8: AWAKE -> FULL-SLEEP
Jan 14 02:31:43 linux-test kernel: ath: phy8: FULL-SLEEP -> AWAKE
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set channel: 2412 MHz width: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:43 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Reset to 2412 MHz, HT40: 0 fastcc: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 2412 Mhz
Jan 14 02:31:43 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Restore history: opmode 2 chan 2412 Mhz is_scanning=0 ofdm:3 cck:2
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set HW RX filter: 0x17
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set channel: 2412 MHz width: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:43 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Reset to 2412 MHz, HT40: 0 fastcc: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 2412 Mhz
Jan 14 02:31:43 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Restore history: opmode 2 chan 2412 Mhz is_scanning=0 ofdm:3 cck:2
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/17/-78
Jan 14 02:31:43 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:03: -95/76/-19
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set channel: 2417 MHz width: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:43 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Reset to 2417 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:43 linux-test kernel: ath: phy8: FastChannelChange for 2412 -> 2417
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/27/-68
Jan 14 02:31:43 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:03: -95/75/-20
Jan 14 02:31:43 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/24/-71
Jan 14 02:31:43 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:03: -95/75/-20
Jan 14 02:31:43 linux-test kernel: ath: phy8: Set channel: 2422 MHz width: 0
Jan 14 02:31:43 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:43 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: Reset to 2422 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:43 linux-test kernel: ath: phy8: FastChannelChange for 2417 -> 2422
Jan 14 02:31:43 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:43 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/41/-54
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2427 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2427 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2422 -> 2427
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:03: -95/72/-23
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2432 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2432 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2427 -> 2432
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/58/-37
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/57/-38
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:03: -95/37/-58
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2437 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2437 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2432 -> 2437
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/57/-38
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2442 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2442 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2437 -> 2442
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/47/-48
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:03: -95/24/-71
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2447 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2447 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2442 -> 2447
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2452 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2452 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2447 -> 2452
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/49/-46
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:03: -95/31/-64
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:55: -95/48/-47
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2457 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2457 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2452 -> 2457
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 2462 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 2462 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 2457 -> 2462
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 5180 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 5180 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 5180 Mhz
Jan 14 02:31:44 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set power: 17
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -95/59/-36
Jan 14 02:31:44 linux-test kernel: cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy8
Jan 14 02:31:44 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -95/60/-35
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 5200 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 5200 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 5180 -> 5200
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 5220 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 5220 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 5200 -> 5220
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 5240 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 5240 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 5220 -> 5240
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 5260 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 5260 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 5240 -> 5260
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set power: 23
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 5280 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 5280 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 5260 -> 5280
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: Set channel: 5300 MHz width: 0
Jan 14 02:31:44 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:44 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: Reset to 5300 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:44 linux-test kernel: ath: phy8: FastChannelChange for 5280 -> 5300
Jan 14 02:31:44 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:44 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 5320 MHz width: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 5320 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:45 linux-test kernel: ath: phy8: FastChannelChange for 5300 -> 5320
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 5745 MHz width: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 5745 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:45 linux-test kernel: ath: phy8: FastChannelChange for 5320 -> 5745
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set power: 30
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:04: -95/69/-26
Jan 14 02:31:45 linux-test kernel: cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy8
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:12:3f:04: -95/70/-25
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 5765 MHz width: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 5765 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:45 linux-test kernel: ath: phy8: FastChannelChange for 5745 -> 5765
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 5785 MHz width: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 5785 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:45 linux-test kernel: ath: phy8: FastChannelChange for 5765 -> 5785
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 5805 MHz width: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 5805 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:45 linux-test kernel: ath: phy8: FastChannelChange for 5785 -> 5805
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 5825 MHz width: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 5825 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:45 linux-test kernel: ath: phy8: FastChannelChange for 5805 -> 5825
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 2412 MHz width: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 2412 MHz, HT40: 0 fastcc: 0
Jan 14 02:31:45 linux-test kernel: wlan0: authenticate with 00:03:7f:42:08:56
Jan 14 02:31:45 linux-test kernel: wlan0: Allocated STA 00:03:7f:42:08:56
Jan 14 02:31:45 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 2412 Mhz
Jan 14 02:31:45 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Restore history: opmode 2 chan 2412 Mhz is_scanning=0 ofdm:3 cck:2
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set HW RX filter: 0x207
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set channel: 5180 MHz width: 2
Jan 14 02:31:45 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:45 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Reset to 5180 MHz, HT40: 1 fastcc: 0
Jan 14 02:31:45 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 5180 Mhz
Jan 14 02:31:45 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:45 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:45 linux-test kernel: ath: phy8: Restore history: opmode 2 chan 5180 Mhz is_scanning=0 ofdm:3 cck:2
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set power: 17
Jan 14 02:31:45 linux-test kernel: ath: phy8: Caching beacon data for BSS: 00:03:7f:42:08:56
Jan 14 02:31:45 linux-test kernel: ath: phy8: STA is not yet associated..skipping beacon config
Jan 14 02:31:45 linux-test kernel: wlan0: Inserted STA 00:03:7f:42:08:56
Jan 14 02:31:45 linux-test kernel: wlan0: send auth to 00:03:7f:42:08:56 (try 1/3)
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/68/-25
Jan 14 02:31:45 linux-test kernel: wlan0: authenticated
Jan 14 02:31:45 linux-test kernel: wlan0: moving STA 00:03:7f:42:08:56 to state 2
Jan 14 02:31:45 linux-test kernel: wlan0: associate with 00:03:7f:42:08:56 (try 1/3)
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/68/-25
Jan 14 02:31:45 linux-test kernel: wlan0: RX AssocResp from 00:03:7f:42:08:56 (capab=0x411 status=0 aid=1)
Jan 14 02:31:45 linux-test kernel: wlan0: moving STA 00:03:7f:42:08:56 to state 3
Jan 14 02:31:45 linux-test kernel: wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Configure tx [queue/halq] [2/2], aifs: 3, cw_min: 15, cw_max: 1023, txop: 0
Jan 14 02:31:45 linux-test kernel: wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Configure tx [queue/halq] [3/3], aifs: 7, cw_min: 15, cw_max: 1023, txop: 0
Jan 14 02:31:45 linux-test kernel: wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 7, cw_max: 15, txop: 94
Jan 14 02:31:45 linux-test kernel: wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
Jan 14 02:31:45 linux-test kernel: ath: phy8: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 3, cw_max: 7, txop: 47
Jan 14 02:31:45 linux-test kernel: ath: phy8: BSSID 00:03:7f:42:08:56 Changed ASSOC 1
Jan 14 02:31:45 linux-test kernel: ath: phy8: Primary Station interface: 00:03:7f:46:06:49, BSSID: 00:03:7f:42:08:56
Jan 14 02:31:45 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:45 linux-test kernel: ath: phy8: Starting ANI
Jan 14 02:31:45 linux-test kernel: wlan0: associated
Jan 14 02:31:45 linux-test kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set HW RX filter: 0x607
Jan 14 02:31:45 linux-test kernel: cfg80211: Calling CRDA for country: US
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/68/-25
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/68/-25
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set HW Key
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 2467 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 2472 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 2484 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5180 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5200 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5220 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5240 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A mBi, 1700 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5260 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5280 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5300 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5320 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A mBi, 2300 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5500 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5520 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5540 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5560 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5580 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5600 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5620 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5640 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5660 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5680 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Disabling freq 5700 MHz
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5745 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5765 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5785 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5805 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Updating information on frequency 5825 MHz with regulatory rule:
Jan 14 02:31:45 linux-test kernel: cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211: Regulatory domain changed to country: US
Jan 14 02:31:45 linux-test kernel: cfg80211:  DFS Master region: unset
Jan 14 02:31:45 linux-test kernel: cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 14 02:31:45 linux-test kernel: cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Jan 14 02:31:45 linux-test kernel: cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set HW Key
Jan 14 02:31:45 linux-test kernel: wlan0: moving STA 00:03:7f:42:08:56 to state 4
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -93/58/-35
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/60/-33
Jan 14 02:31:45 linux-test kernel: ath: phy8: bmiss: 10 sleep: 102400
Jan 14 02:31:45 linux-test kernel: ath: phy8: next DTIM -562589696
Jan 14 02:31:45 linux-test kernel: ath: phy8: next beacon -562589696
Jan 14 02:31:45 linux-test kernel: ath: phy8: beacon period 102400
Jan 14 02:31:45 linux-test kernel: ath: phy8: DTIM period 102400
Jan 14 02:31:45 linux-test kernel: wlan0: Limiting TX power to 14 (17 - 3) dBm as advertised by 00:03:7f:42:08:56
Jan 14 02:31:45 linux-test kernel: ath: phy8: Set power: 14
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:45 linux-test kernel: wlan0: Open BA session requested for 00:03:7f:42:08:56 tid 0
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -93/57/-36
Jan 14 02:31:45 linux-test kernel: wlan0: activated addBA response timer on 00:03:7f:42:08:56 tid 0
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:45 linux-test kernel: wlan0: switched off addBA timer for 00:03:7f:42:08:56 tid 0
Jan 14 02:31:45 linux-test kernel: wlan0: Aggregation is on for 00:03:7f:42:08:56 tid 0
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -93/58/-35
Jan 14 02:31:45 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:46 linux-test kernel: ath: phy8: listenTime=1786 OFDM:3 errs=6/s CCK:2 errs=0/s ofdm_turn=1
Jan 14 02:31:46 linux-test kernel: ath: phy8: **** ofdmlevel 3=>2, rssi=59[lo=7 hi=40]
Jan 14 02:31:46 linux-test kernel: ath: phy8: ** ch 5180: level 3=>2[def:3] cycpwrThr1[level]=0 ini=2
Jan 14 02:31:46 linux-test kernel: ath: phy8: ** ch 5180: level 3=>2[def:3] cycpwrThr1Ext[level]=0 ini=2
Jan 14 02:31:46 linux-test kernel: ath: phy8: ANI parameters: SI=2, ofdmWS=on FS=2 MRCcck=on listenTime=1786 ofdmErrs=12 cckErrs=0
Jan 14 02:31:46 linux-test kernel: ath: phy8: Calibration @4295043746 finished:  short ani, caldone: true
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/60/-33
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -93/58/-35
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -93/59/-34
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/57/-36
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -93/59/-34
Jan 14 02:31:46 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:47 linux-test kernel: ath: phy8: listenTime=995 OFDM:2 errs=10/s CCK:2 errs=0/s ofdm_turn=0
Jan 14 02:31:47 linux-test kernel: ath: phy8: **** ccklevel 2=>1, rssi=59[lo=7 hi=40]
Jan 14 02:31:47 linux-test kernel: ath: phy8: Calibration @4295043846 finished:   ani, caldone: true
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:47 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:48 linux-test kernel: ath: phy8: listenTime=995 OFDM:2 errs=11/s CCK:1 errs=0/s ofdm_turn=1
Jan 14 02:31:48 linux-test kernel: ath: phy8: **** ofdmlevel 2=>1, rssi=59[lo=7 hi=40]
Jan 14 02:31:48 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:3] cycpwrThr1[level]=0 ini=2
Jan 14 02:31:48 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:3] cycpwrThr1Ext[level]=0 ini=2
Jan 14 02:31:48 linux-test kernel: ath: phy8: ANI parameters: SI=1, ofdmWS=on FS=2 MRCcck=on listenTime=995 ofdmErrs=11 cckErrs=0
Jan 14 02:31:48 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:2] firstep[level]=6 ini=8
Jan 14 02:31:48 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:2] firstep_low[level]=6 ini=8
Jan 14 02:31:48 linux-test kernel: ath: phy8: ANI parameters: SI=1, ofdmWS=on FS=1 MRCcck=on listenTime=995 ofdmErrs=11 cckErrs=0
Jan 14 02:31:48 linux-test kernel: ath: phy8: Calibration @4295043946 finished:   ani, caldone: true
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:48 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:49 linux-test kernel: ath: phy8: listenTime=995 OFDM:1 errs=13/s CCK:1 errs=0/s ofdm_turn=0
Jan 14 02:31:49 linux-test kernel: ath: phy8: **** ccklevel 1=>0, rssi=59[lo=7 hi=40]
Jan 14 02:31:49 linux-test kernel: ath: phy8: Calibration @4295044046 finished:   ani, caldone: true
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:49 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:50 linux-test kernel: ath: phy8: listenTime=995 OFDM:1 errs=12/s CCK:0 errs=0/s ofdm_turn=1
Jan 14 02:31:50 linux-test kernel: ath: phy8: **** ofdmlevel 1=>0, rssi=59[lo=7 hi=40]
Jan 14 02:31:50 linux-test kernel: ath: phy8: ** ch 5180: level 1=>0[def:3] cycpwrThr1[level]=0 ini=2
Jan 14 02:31:50 linux-test kernel: ath: phy8: ** ch 5180: level 1=>0[def:3] cycpwrThr1Ext[level]=0 ini=2
Jan 14 02:31:50 linux-test kernel: ath: phy8: ANI parameters: SI=0, ofdmWS=on FS=1 MRCcck=on listenTime=995 ofdmErrs=12 cckErrs=0
Jan 14 02:31:50 linux-test kernel: ath: phy8: ** ch 5180: level 1=>0[def:2] firstep[level]=4 ini=8
Jan 14 02:31:50 linux-test kernel: ath: phy8: ** ch 5180: level 1=>0[def:2] firstep_low[level]=4 ini=8
Jan 14 02:31:50 linux-test kernel: ath: phy8: ANI parameters: SI=0, ofdmWS=on FS=0 MRCcck=on listenTime=995 ofdmErrs=12 cckErrs=0
Jan 14 02:31:50 linux-test kernel: ath: phy8: Calibration @4295044146 finished:   ani, caldone: true
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/59/-34
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -93/59/-34
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -93/58/-35
Jan 14 02:31:50 linux-test kernel: ath: phy8: Set HW RX filter: 0x417
Jan 14 02:31:50 linux-test kernel: ath: phy8: Set channel: 5180 MHz width: 2
Jan 14 02:31:50 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:50 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:50 linux-test kernel: ath: phy8: Reset to 5180 MHz, HT40: 1 fastcc: 0
Jan 14 02:31:50 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 5180 Mhz
Jan 14 02:31:50 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:50 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:50 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:50 linux-test kernel: ath: phy8: Restore history: opmode 2 chan 5180 Mhz is_scanning=0 ofdm:0 cck:0
Jan 14 02:31:50 linux-test kernel: ath: phy8: **** ofdmlevel 0=>3, rssi=58[lo=7 hi=40]
Jan 14 02:31:50 linux-test kernel: ath: phy8: **** ccklevel 0=>2, rssi=58[lo=7 hi=40]
Jan 14 02:31:50 linux-test kernel: ath: phy8: Starting ANI
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -92/59/-33
Jan 14 02:31:50 linux-test kernel: ath: phy8: bmiss: 10 sleep: 102400
Jan 14 02:31:50 linux-test kernel: ath: phy8: next DTIM -557367296
Jan 14 02:31:50 linux-test kernel: ath: phy8: next beacon -557367296
Jan 14 02:31:50 linux-test kernel: ath: phy8: beacon period 102400
Jan 14 02:31:50 linux-test kernel: ath: phy8: DTIM period 102400
Jan 14 02:31:50 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -92/58/-34
Jan 14 02:31:50 linux-test kernel: ath: phy8: Set channel: 5200 MHz width: 0
Jan 14 02:31:50 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:50 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:50 linux-test kernel: ath: phy8: Reset to 5200 MHz, HT40: 0 fastcc: 1
Jan 14 02:31:50 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 5200 Mhz
Jan 14 02:31:50 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:50 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:50 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:50 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=59[lo=7 hi=40]
Jan 14 02:31:50 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=59[lo=7 hi=40]
Jan 14 02:31:50 linux-test kernel: ath: phy8: Set channel: 5180 MHz width: 2
Jan 14 02:31:50 linux-test kernel: ath: phy8: Stopping ANI
Jan 14 02:31:50 linux-test kernel: ath: phy8: Disable MIB counters
Jan 14 02:31:50 linux-test kernel: ath: phy8: Reset to 5180 MHz, HT40: 1 fastcc: 0
Jan 14 02:31:50 linux-test kernel: ath: phy8: ver 448.4 opmode 2 chan 5180 Mhz
Jan 14 02:31:50 linux-test kernel: ath: phy8: ah->misc_mode 0x10000004
Jan 14 02:31:50 linux-test kernel: ath: phy8: Enabled BB Watchdog timeout (25 ms)
Jan 14 02:31:50 linux-test kernel: ath: phy8: Enable MIB counters
Jan 14 02:31:50 linux-test kernel: ath: phy8: Restore history: opmode 2 chan 5180 Mhz is_scanning=0 ofdm:3 cck:2
Jan 14 02:31:50 linux-test kernel: ath: phy8: **** ofdmlevel 3=>3, rssi=59[lo=7 hi=40]
Jan 14 02:31:50 linux-test kernel: ath: phy8: **** ccklevel 2=>2, rssi=59[lo=7 hi=40]
Jan 14 02:31:50 linux-test kernel: ath: phy8: Starting ANI
Jan 14 02:31:50 linux-test kernel: ath: phy8: Set HW RX filter: 0x607
Jan 14 02:31:50 linux-test kernel: wlan0: cancelling AP probe due to a received beacon
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:51 linux-test kernel: ath: phy8: bmiss: 10 sleep: 102400
Jan 14 02:31:51 linux-test kernel: ath: phy8: next DTIM -557162496
Jan 14 02:31:51 linux-test kernel: ath: phy8: next beacon -557162496
Jan 14 02:31:51 linux-test kernel: ath: phy8: beacon period 102400
Jan 14 02:31:51 linux-test kernel: ath: phy8: DTIM period 102400
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/57/-34
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:51 linux-test kernel: ath: phy8: listenTime=1378 OFDM:3 errs=7/s CCK:2 errs=0/s ofdm_turn=0
Jan 14 02:31:51 linux-test kernel: ath: phy8: **** ccklevel 2=>1, rssi=58[lo=7 hi=40]
Jan 14 02:31:51 linux-test kernel: ath: phy8: Calibration @4295044288 finished:   ani, caldone: true
Jan 14 02:31:51 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/57/-34
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:52 linux-test kernel: ath: phy8: listenTime=995 OFDM:3 errs=11/s CCK:1 errs=0/s ofdm_turn=1
Jan 14 02:31:52 linux-test kernel: ath: phy8: **** ofdmlevel 3=>2, rssi=58[lo=7 hi=40]
Jan 14 02:31:52 linux-test kernel: ath: phy8: ** ch 5180: level 3=>2[def:3] cycpwrThr1[level]=0 ini=2
Jan 14 02:31:52 linux-test kernel: ath: phy8: ** ch 5180: level 3=>2[def:3] cycpwrThr1Ext[level]=0 ini=2
Jan 14 02:31:52 linux-test kernel: ath: phy8: ANI parameters: SI=2, ofdmWS=on FS=2 MRCcck=on listenTime=995 ofdmErrs=11 cckErrs=0
Jan 14 02:31:52 linux-test kernel: ath: phy8: Calibration @4295044388 finished:   ani, caldone: true
Jan 14 02:31:52 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:53 linux-test kernel: ath: phy8: listenTime=995 OFDM:2 errs=10/s CCK:1 errs=0/s ofdm_turn=0
Jan 14 02:31:53 linux-test kernel: ath: phy8: **** ccklevel 1=>0, rssi=58[lo=7 hi=40]
Jan 14 02:31:53 linux-test kernel: ath: phy8: Calibration @4295044488 finished:   ani, caldone: true
Jan 14 02:31:53 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/57/-34
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/57/-34
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/57/-34
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:46:06:49: -91/58/-33
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/57/-34
Jan 14 02:31:54 linux-test kernel: ath: phy8: listenTime=995 OFDM:2 errs=10/s CCK:0 errs=0/s ofdm_turn=1
Jan 14 02:31:54 linux-test kernel: ath: phy8: **** ofdmlevel 2=>1, rssi=58[lo=7 hi=40]
Jan 14 02:31:54 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:3] cycpwrThr1[level]=0 ini=2
Jan 14 02:31:54 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:3] cycpwrThr1Ext[level]=0 ini=2
Jan 14 02:31:54 linux-test kernel: ath: phy8: ANI parameters: SI=1, ofdmWS=on FS=2 MRCcck=on listenTime=995 ofdmErrs=10 cckErrs=0
Jan 14 02:31:54 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:2] firstep[level]=6 ini=8
Jan 14 02:31:54 linux-test kernel: ath: phy8: ** ch 5180: level 2=>1[def:2] firstep_low[level]=6 ini=8
Jan 14 02:31:54 linux-test kernel: ath: phy8: ANI parameters: SI=1, ofdmWS=on FS=1 MRCcck=on listenTime=995 ofdmErrs=10 cckErrs=0
Jan 14 02:31:54 linux-test kernel: ath: phy8: Calibration @4295044588 finished:   ani, caldone: true
Jan 14 02:31:54 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:55 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:55 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/59/-32
Jan 14 02:31:55 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:55 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:55 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:55 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33
Jan 14 02:31:55 linux-test kernel: NOISE/RSSI/SIGNAL for 00:03:7f:42:08:56: -91/58/-33