[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.9-gentoo (root@sage) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #9 SMP Tue Nov 27 15:18:53 PST 2012 [ 0.000000] Command line: root=/dev/sda2 kmemleak=off [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000a7c2e000 (usable) [ 0.000000] BIOS-e820: 00000000a7c2e000 - 00000000a7c8c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000a7c8c000 - 00000000a7cad000 (reserved) [ 0.000000] BIOS-e820: 00000000a7cad000 - 00000000a7cbe000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000a7cbe000 - 00000000a7cd4000 (reserved) [ 0.000000] BIOS-e820: 00000000a7cd4000 - 00000000a7cd9000 (usable) [ 0.000000] BIOS-e820: 00000000a7cd9000 - 00000000a7cdc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000a7cdc000 - 00000000a7cdd000 (reserved) [ 0.000000] BIOS-e820: 00000000a7cdd000 - 00000000a7ce4000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000a7ce4000 - 00000000a7d48000 (reserved) [ 0.000000] BIOS-e820: 00000000a7d48000 - 00000000a7d8b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000a7d8b000 - 00000000a7f00000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100001000 - 000000023f000000 (usable) [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/C60M1-I, BIOS 0305 08/07/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0A7F00000 mask FFFF00000 uncachable [ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000023f000000 aka 9200M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000a7f00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xa7f00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fcd20] fcd20 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 8192 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000a7f00000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00a7e00000 page 2M [ 0.000000] 00a7e00000 - 00a7f00000 page 4k [ 0.000000] kernel direct mapping tables up to a7f00000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023f000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 023f000000 page 2M [ 0.000000] kernel direct mapping tables up to 23f000000 @ a7efe000-a7f00000 [ 0.000000] RAMDISK: 37c92000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000a7c83068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000a7c894a0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579) [ 0.000000] ACPI: DSDT 00000000a7c83150 0634D (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000a7ce3f80 00040 [ 0.000000] ACPI: APIC 00000000a7c89598 00062 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000a7c89600 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 00000000a7c89640 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 00000000a7c89678 0030C (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000a7c89988 0168E (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023f000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023f000000 [ 0.000000] NODE_DATA [000000023effc000 - 000000023effffff] [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023e5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023f000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000a7c2e [ 0.000000] 0: 0x000a7cd4 -> 0x000a7cd9 [ 0.000000] 0: 0x000a7d8b -> 0x000a7f00 [ 0.000000] 0: 0x00100001 -> 0x0023f000 [ 0.000000] On node 0 totalpages: 1994036 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3915 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 667112 pages, LIFO batch:31 [ 0.000000] Normal zone: 20416 pages used for memmap [ 0.000000] Normal zone: 1286207 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at a7f00000 (gap: a7f00000:56d00000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88023ec00000 s76544 r8192 d21760 u1048576 [ 0.000000] pcpu-alloc: s76544 r8192 d21760 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1957234 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda2 kmemleak=off [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7766756k/9420800k available (6852k kernel code, 1444656k absent, 209388k reserved, 6072k data, 628k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 1000.056 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.11 BogoMIPS (lpj=1000056) [ 0.000167] pid_max: default: 32768 minimum: 301 [ 0.000285] Security Framework initialized [ 0.000367] SELinux: Initializing. [ 0.000455] SELinux: Starting in permissive mode [ 0.001630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008002] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010823] Mount-cache hash table entries: 256 [ 0.011295] Initializing cgroup subsys cpuacct [ 0.011380] Initializing cgroup subsys freezer [ 0.011494] tseg: 00a7f00000 [ 0.011498] CPU: Physical Processor ID: 0 [ 0.011610] CPU: Processor Core ID: 0 [ 0.011687] mce: CPU supports 6 MCE banks [ 0.011900] ACPI: Core revision 20120320 [ 0.020460] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.030549] CPU0: AMD C-60 APU with Radeon(tm) HD Graphics stepping 00 [ 0.132436] Performance Events: AMD PMU driver. [ 0.132559] ... version: 0 [ 0.132636] ... bit width: 48 [ 0.132714] ... generic registers: 4 [ 0.132791] ... value mask: 0000ffffffffffff [ 0.132870] ... max period: 00007fffffffffff [ 0.132949] ... fixed-purpose events: 0 [ 0.133027] ... event mask: 000000000000000f [ 0.133391] MCE: In-kernel MCE decoding enabled. [ 0.133694] Booting Node 0, Processors #1 Ok. [ 0.146952] Brought up 2 CPUs [ 0.147036] Total of 2 processors activated (4000.22 BogoMIPS). [ 0.148535] xor: automatically using best checksumming function: generic_sse [ 0.153416] generic_sse: 1992.000 MB/sec [ 0.153502] xor: using function: generic_sse (1992.000 MB/sec) [ 0.153688] NET: Registered protocol family 16 [ 0.154184] kworker/u:0 used greatest stack depth: 5888 bytes left [ 0.154507] kworker/u:0 used greatest stack depth: 5472 bytes left [ 0.156015] ACPI: bus type pci registered [ 0.156508] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.156641] PCI: not using MMCONFIG [ 0.156723] PCI: Using configuration type 1 for base access [ 0.156807] PCI: Using configuration type 1 for extended access [ 0.186960] bio: create slab at 0 [ 0.203448] raid6: int64x1 500 MB/s [ 0.220368] raid6: int64x2 554 MB/s [ 0.237318] raid6: int64x4 476 MB/s [ 0.254398] raid6: int64x8 507 MB/s [ 0.271299] raid6: sse2x1 835 MB/s [ 0.288284] raid6: sse2x2 960 MB/s [ 0.305249] raid6: sse2x4 1414 MB/s [ 0.305333] raid6: using algorithm sse2x4 (1414 MB/s) [ 0.305693] ACPI: Added _OSI(Module Device) [ 0.305823] ACPI: Added _OSI(Processor Device) [ 0.305909] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.305994] ACPI: Added _OSI(Processor Aggregator Device) [ 0.308259] ACPI: EC: Look up EC in DSDT [ 0.311371] ACPI: Executed 3 blocks of module-level executable AML code [ 0.321837] ACPI: Interpreter enabled [ 0.321932] ACPI: (supports S0 S5) [ 0.322117] ACPI: Using IOAPIC for interrupt routing [ 0.322585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.322842] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.431941] ACPI: No dock devices found. [ 0.432046] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.432567] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.433286] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.433378] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.433468] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.433593] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] [ 0.433725] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 0.433858] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) [ 0.434134] PCI host bridge to bus 0000:00 [ 0.434226] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.434314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.434403] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.434493] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.434601] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.434747] pci 0000:00:01.0: [1002:9807] type 00 class 0x030000 [ 0.434769] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.434783] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff] [ 0.434797] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff] [ 0.434877] pci 0000:00:01.0: supports D1 D2 [ 0.434913] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400 [ 0.435012] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.435079] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.435111] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147] [ 0.435130] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133] [ 0.435148] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127] [ 0.435166] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113] [ 0.435183] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f] [ 0.435201] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff] [ 0.435296] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.435320] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff] [ 0.435434] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.435466] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff] [ 0.435594] pci 0000:00:12.2: supports D1 D2 [ 0.435599] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.435646] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.435670] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff] [ 0.435784] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.435815] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff] [ 0.435943] pci 0000:00:13.2: supports D1 D2 [ 0.435948] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.435989] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.436114] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.436152] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit] [ 0.436255] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.436283] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.436404] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.436483] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.436508] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff] [ 0.436642] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.436768] pci 0000:00:15.0: supports D1 D2 [ 0.436812] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 0.436936] pci 0000:00:15.1: supports D1 D2 [ 0.436985] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.437009] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff] [ 0.437123] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.437155] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff] [ 0.437282] pci 0000:00:16.2: supports D1 D2 [ 0.437287] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.437331] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.437396] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.437454] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.437515] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.437591] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.437658] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.437716] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.437774] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.437906] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.439232] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode) [ 0.439333] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.439341] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.439348] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.439356] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.439440] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.439653] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.439683] pci 0000:04:00.0: reg 10: [io 0xe000-0xe0ff] [ 0.439729] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 0.439761] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 0.439878] pci 0000:04:00.0: supports D1 D2 [ 0.439883] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.441658] pci 0000:00:15.1: PCI bridge to [bus 04-04] [ 0.441756] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 0.441772] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.441814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.442240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.442332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT] [ 0.442476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.442560] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.442661] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.442781] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.460626] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.461264] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.461894] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.462510] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.463105] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.463666] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.464218] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.464797] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.465791] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.465946] vgaarb: loaded [ 0.466027] vgaarb: bridge control possible 0000:00:01.0 [ 0.466570] SCSI subsystem initialized [ 0.467169] libata version 3.00 loaded. [ 0.467797] usbcore: registered new interface driver usbfs [ 0.468087] usbcore: registered new interface driver hub [ 0.468379] usbcore: registered new device driver usb [ 0.469323] PCI: Using ACPI for IRQ routing [ 0.481862] PCI: pci_cache_line_size set to 64 bytes [ 0.482037] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.482058] reserve RAM buffer: 00000000a7c2e000 - 00000000a7ffffff [ 0.482069] reserve RAM buffer: 00000000a7cd9000 - 00000000a7ffffff [ 0.482078] reserve RAM buffer: 00000000a7f00000 - 00000000a7ffffff [ 0.482084] reserve RAM buffer: 000000023f000000 - 000000023fffffff [ 0.482964] NetLabel: Initializing [ 0.483085] NetLabel: domain hash size = 128 [ 0.483169] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.483281] NetLabel: unlabeled traffic allowed by default [ 0.483863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.484138] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.486288] Switching to clocksource hpet [ 0.505399] pnp: PnP ACPI init [ 0.505540] ACPI: bus type pnp registered [ 0.506086] pnp 00:00: [bus 00-ff] [ 0.506094] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.506101] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.506107] pnp 00:00: [io 0x0d00-0xffff window] [ 0.506114] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.506120] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.506127] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.506133] pnp 00:00: [mem 0x00000000 window] [ 0.506448] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.506590] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.506795] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.506895] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.508102] pnp 00:02: [io 0x040b] [ 0.508109] pnp 00:02: [io 0x04d6] [ 0.508115] pnp 00:02: [io 0x0c00-0x0c01] [ 0.508121] pnp 00:02: [io 0x0c14] [ 0.508126] pnp 00:02: [io 0x0c50-0x0c51] [ 0.508131] pnp 00:02: [io 0x0c52] [ 0.508136] pnp 00:02: [io 0x0c6c] [ 0.508141] pnp 00:02: [io 0x0c6f] [ 0.508152] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.508158] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.508163] pnp 00:02: [io 0x0cd4-0x0cd5] [ 0.508168] pnp 00:02: [io 0x0cd6-0x0cd7] [ 0.508173] pnp 00:02: [io 0x0cd8-0x0cdf] [ 0.508179] pnp 00:02: [io 0x0800-0x089f] [ 0.508184] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.508191] pnp 00:02: [io 0x0000-0x000f] [ 0.508196] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.508201] pnp 00:02: [io 0x0900-0x090f] [ 0.508206] pnp 00:02: [io 0x0910-0x091f] [ 0.508211] pnp 00:02: [io 0xfe00-0xfefe] [ 0.508216] pnp 00:02: [io 0x0060-0x005f disabled] [ 0.508222] pnp 00:02: [io 0x0064-0x0063 disabled] [ 0.508228] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 0.508234] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 0.508239] pnp 00:02: [mem 0xfed80000-0xfed8ffff] [ 0.508245] pnp 00:02: [mem 0xfed61000-0xfed70fff] [ 0.508250] pnp 00:02: [mem 0xfec10000-0xfec10fff] [ 0.508256] pnp 00:02: [mem 0xfed00000-0xfed00fff] [ 0.508261] pnp 00:02: [mem 0xffc00000-0xffffffff] [ 0.508527] system 00:02: [io 0x040b] has been reserved [ 0.508617] system 00:02: [io 0x04d6] has been reserved [ 0.508704] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.508794] system 00:02: [io 0x0c14] has been reserved [ 0.508881] system 00:02: [io 0x0c50-0x0c51] has been reserved [ 0.508969] system 00:02: [io 0x0c52] has been reserved [ 0.509056] system 00:02: [io 0x0c6c] has been reserved [ 0.509143] system 00:02: [io 0x0c6f] has been reserved [ 0.509230] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.509318] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.509406] system 00:02: [io 0x0cd4-0x0cd5] has been reserved [ 0.509563] system 00:02: [io 0x0cd6-0x0cd7] has been reserved [ 0.509653] system 00:02: [io 0x0cd8-0x0cdf] has been reserved [ 0.509742] system 00:02: [io 0x0800-0x089f] has been reserved [ 0.509830] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.509918] system 00:02: [io 0x0900-0x090f] has been reserved [ 0.510006] system 00:02: [io 0x0910-0x091f] has been reserved [ 0.510094] system 00:02: [io 0xfe00-0xfefe] has been reserved [ 0.510186] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.510277] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.510365] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.510472] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.510560] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.510650] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.510740] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved [ 0.510832] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.511208] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.511214] pnp 00:03: [io 0x0300-0x031f] [ 0.511219] pnp 00:03: [io 0x0290-0x029f] [ 0.511224] pnp 00:03: [io 0x0230-0x023f] [ 0.511521] system 00:03: [io 0x0300-0x031f] has been reserved [ 0.511618] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.511707] system 00:03: [io 0x0230-0x023f] has been reserved [ 0.511799] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.511849] pnp 00:04: [dma 4] [ 0.511856] pnp 00:04: [io 0x0000-0x000f] [ 0.511862] pnp 00:04: [io 0x0081-0x0083] [ 0.511867] pnp 00:04: [io 0x0087] [ 0.511872] pnp 00:04: [io 0x0089-0x008b] [ 0.511878] pnp 00:04: [io 0x008f] [ 0.511883] pnp 00:04: [io 0x00c0-0x00df] [ 0.512028] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.512062] pnp 00:05: [io 0x0070-0x0071] [ 0.512087] pnp 00:05: [irq 8] [ 0.512246] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.512273] pnp 00:06: [io 0x0061] [ 0.512618] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.512713] pnp 00:07: [io 0x0010-0x001f] [ 0.512719] pnp 00:07: [io 0x0022-0x003f] [ 0.512724] pnp 00:07: [io 0x0044-0x005f] [ 0.512729] pnp 00:07: [io 0x0072-0x007f] [ 0.512734] pnp 00:07: [io 0x0080] [ 0.512739] pnp 00:07: [io 0x0084-0x0086] [ 0.512744] pnp 00:07: [io 0x0088] [ 0.512762] pnp 00:07: [io 0x008c-0x008e] [ 0.512767] pnp 00:07: [io 0x0090-0x009f] [ 0.512772] pnp 00:07: [io 0x00a2-0x00bf] [ 0.512777] pnp 00:07: [io 0x00e0-0x00ef] [ 0.512783] pnp 00:07: [io 0x04d0-0x04d1] [ 0.512987] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.513082] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.513110] pnp 00:08: [io 0x00f0-0x00ff] [ 0.513125] pnp 00:08: [irq 13] [ 0.513257] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.513585] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.514460] pnp 00:0a: [io 0x03f8-0x03ff] [ 0.514480] pnp 00:0a: [irq 4] [ 0.514487] pnp 00:0a: [dma 0 disabled] [ 0.514784] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.515117] pnp 00:0b: [mem 0xa8000000-0xbfffffff] [ 0.515367] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved [ 0.515497] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.515859] pnp 00:0c: [mem 0xfed00000-0xfed003ff] [ 0.516101] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.516129] pnp: PnP ACPI: found 13 devices [ 0.516216] ACPI: ACPI bus type pnp unregistered [ 0.521271] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000 [ 0.521284] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000 [ 0.521295] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01-01] add_size 200000 [ 0.521343] pci 0000:00:04.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.521353] pci 0000:00:04.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.521361] pci 0000:00:04.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.521376] pci 0000:00:04.0: BAR 8: assigned [mem 0xd0100000-0xd02fffff] [ 0.521505] pci 0000:00:04.0: BAR 9: assigned [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.521634] pci 0000:00:04.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.521727] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.521816] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] [ 0.521908] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff] [ 0.522001] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.522131] pci 0000:00:14.4: PCI bridge to [bus 02-02] [ 0.522232] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.522333] pci 0000:00:15.1: PCI bridge to [bus 04-04] [ 0.522433] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 0.522530] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.522725] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.522731] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.522738] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.522744] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 0.522751] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.522757] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff] [ 0.522764] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref] [ 0.522771] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.522777] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.522783] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.522789] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff] [ 0.522796] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.522802] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 0.522907] NET: Registered protocol family 2 [ 0.523531] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.526959] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.533249] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.534084] TCP: Hash tables configured (established 524288 bind 65536) [ 0.534183] TCP: reno registered [ 0.534315] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.534558] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.534920] NET: Registered protocol family 1 [ 0.535499] RPC: Registered named UNIX socket transport module. [ 0.535602] RPC: Registered udp transport module. [ 0.535686] RPC: Registered tcp transport module. [ 0.535772] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.535883] pci 0000:00:01.0: Boot video device [ 0.536328] PCI: CLS 64 bytes, default 64 [ 0.536489] Trying to unpack rootfs image as initramfs... [ 0.710409] Freeing initrd memory: 3448k freed [ 0.713048] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.713152] Placing 64MB software IO TLB between ffff8800a3c2e000 - ffff8800a7c2e000 [ 0.713302] software IO TLB at phys 0xa3c2e000 - 0xa7c2e000 [ 0.714755] LVT offset 0 assigned for vector 0x400 [ 0.714886] perf: AMD IBS detected (0x000000ff) [ 0.716019] microcode: CPU0: patch_level=0x0500010d [ 0.716170] microcode: CPU1: patch_level=0x0500010d [ 0.716474] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.717429] audit: initializing netlink socket (disabled) [ 0.717545] type=2000 audit(1354257401.615:1): initialized [ 0.719214] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.732277] VFS: Disk quotas dquot_6.5.2 [ 0.732586] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.735599] NFS: Registering the id_resolver key type [ 0.736345] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.736874] fuse init (API version 7.18) [ 0.737787] msgmni has been set to 15176 [ 0.738246] SELinux: Registering netfilter hooks [ 0.739625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.739764] io scheduler noop registered [ 0.739847] io scheduler deadline registered [ 0.740447] io scheduler cfq registered (default) [ 0.741335] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.741695] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.006216] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.028643] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.029891] Non-volatile memory driver v1.3 [ 1.030008] Linux agpgart interface v0.103 [ 1.031132] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.031273] ACPI: Power Button [PWRB] [ 1.031594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.031728] ACPI: Power Button [PWRF] [ 1.032331] ACPI: acpi_idle registered with cpuidle [ 1.040705] [drm] Initialized drm 1.1.0 20060810 [ 1.040805] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 1.047494] brd: module loaded [ 1.051431] loop: module loaded [ 1.052386] ahci 0000:00:11.0: version 3.0 [ 1.052693] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.052829] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.057362] scsi0 : ahci [ 1.058175] scsi1 : ahci [ 1.058706] scsi2 : ahci [ 1.059310] scsi3 : ahci [ 1.059700] scsi4 : ahci [ 1.060317] scsi5 : ahci [ 1.060780] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19 [ 1.060956] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19 [ 1.061085] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19 [ 1.061208] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19 [ 1.061326] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19 [ 1.061445] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19 [ 1.062953] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.063053] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.063273] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.063365] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.063574] e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k [ 1.063662] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 1.064004] sky2: driver version 1.30 [ 1.064629] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.064973] r8169 0000:04:00.0: irq 40 for MSI/MSI-X [ 1.065533] r8169 0000:04:00.0: eth0: RTL8168f/8111f at 0xffffc90000c74000, 30:85:a9:eb:f2:25, XID 08000800 IRQ 40 [ 1.065669] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.066598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.066703] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.066825] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.067086] drivers/usb/core/inode.c: creating file 'devices' [ 1.067097] drivers/usb/core/inode.c: creating file '001' [ 1.067247] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.067383] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.067394] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.067403] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.067580] QUIRK: Enable AMD PLL fix [ 1.067602] ehci_hcd 0000:00:12.2: debug port 1 [ 1.068789] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.068806] ehci_hcd 0000:00:12.2: MWI active [ 1.068811] ehci_hcd 0000:00:12.2: supports USB remote wakeup [ 1.068857] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb49000 [ 1.068964] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.074896] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.075040] usb usb1: default language 0x0409 [ 1.075053] usb usb1: udev 1, busnum 1, minor = 0 [ 1.075057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.075141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.075258] usb usb1: Product: EHCI Host Controller [ 1.075338] usb usb1: Manufacturer: Linux 3.4.9-gentoo ehci_hcd [ 1.075419] usb usb1: SerialNumber: 0000:00:12.2 [ 1.075778] usb usb1: usb_probe_device [ 1.075792] usb usb1: configuration #1 chosen from 1 choice [ 1.075819] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.076200] hub 1-0:1.0: usb_probe_interface [ 1.076207] hub 1-0:1.0: usb_probe_interface - got id [ 1.076213] hub 1-0:1.0: USB hub found [ 1.076309] hub 1-0:1.0: 5 ports detected [ 1.076393] hub 1-0:1.0: standalone hub [ 1.076397] hub 1-0:1.0: no power switching (usb 1.0) [ 1.076402] hub 1-0:1.0: individual port over-current protection [ 1.076409] hub 1-0:1.0: power on to power good time: 20ms [ 1.076420] hub 1-0:1.0: local power source is good [ 1.076426] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.076493] drivers/usb/core/inode.c: creating file '001' [ 1.076594] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.076692] drivers/usb/core/inode.c: creating file '002' [ 1.077023] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.077159] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.077170] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.077178] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.077347] ehci_hcd 0000:00:13.2: debug port 1 [ 1.077437] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.077452] ehci_hcd 0000:00:13.2: MWI active [ 1.077458] ehci_hcd 0000:00:13.2: supports USB remote wakeup [ 1.077476] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb47000 [ 1.077570] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.082885] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.083019] usb usb2: default language 0x0409 [ 1.083031] usb usb2: udev 1, busnum 2, minor = 128 [ 1.083035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.083119] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.083234] usb usb2: Product: EHCI Host Controller [ 1.083312] usb usb2: Manufacturer: Linux 3.4.9-gentoo ehci_hcd [ 1.083394] usb usb2: SerialNumber: 0000:00:13.2 [ 1.083730] usb usb2: usb_probe_device [ 1.083737] usb usb2: configuration #1 chosen from 1 choice [ 1.083753] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.084065] hub 2-0:1.0: usb_probe_interface [ 1.084071] hub 2-0:1.0: usb_probe_interface - got id [ 1.084076] hub 2-0:1.0: USB hub found [ 1.084166] hub 2-0:1.0: 5 ports detected [ 1.084248] hub 2-0:1.0: standalone hub [ 1.084252] hub 2-0:1.0: no power switching (usb 1.0) [ 1.084257] hub 2-0:1.0: individual port over-current protection [ 1.084263] hub 2-0:1.0: power on to power good time: 20ms [ 1.084273] hub 2-0:1.0: local power source is good [ 1.084278] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.084327] drivers/usb/core/inode.c: creating file '001' [ 1.084410] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.084507] drivers/usb/core/inode.c: creating file '003' [ 1.084942] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.085096] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4 [ 1.085107] ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.085116] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.085297] ehci_hcd 0000:00:16.2: debug port 1 [ 1.085390] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.085407] ehci_hcd 0000:00:16.2: MWI active [ 1.085412] ehci_hcd 0000:00:16.2: supports USB remote wakeup [ 1.085439] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb44000 [ 1.085533] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.090904] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.091098] usb usb3: default language 0x0409 [ 1.091113] usb usb3: udev 1, busnum 3, minor = 256 [ 1.091118] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.091202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.091319] usb usb3: Product: EHCI Host Controller [ 1.091399] usb usb3: Manufacturer: Linux 3.4.9-gentoo ehci_hcd [ 1.091480] usb usb3: SerialNumber: 0000:00:16.2 [ 1.092003] usb usb3: usb_probe_device [ 1.092018] usb usb3: configuration #1 chosen from 1 choice [ 1.092048] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.092343] hub 3-0:1.0: usb_probe_interface [ 1.092350] hub 3-0:1.0: usb_probe_interface - got id [ 1.092356] hub 3-0:1.0: USB hub found [ 1.092456] hub 3-0:1.0: 4 ports detected [ 1.092540] hub 3-0:1.0: standalone hub [ 1.092544] hub 3-0:1.0: no power switching (usb 1.0) [ 1.092549] hub 3-0:1.0: individual port over-current protection [ 1.092556] hub 3-0:1.0: power on to power good time: 20ms [ 1.092566] hub 3-0:1.0: local power source is good [ 1.092572] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.092623] drivers/usb/core/inode.c: creating file '001' [ 1.093072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.093176] ohci_hcd: block sizes: ed 80 td 96 [ 1.093286] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.093380] drivers/usb/core/inode.c: creating file '004' [ 1.093556] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.093696] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk [ 1.093730] ohci_hcd 0000:00:12.0: created debug files [ 1.093736] ohci_hcd 0000:00:12.0: supports USB remote wakeup [ 1.093783] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4a000 [ 1.148852] ohci_hcd 0000:00:12.0: OHCI controller state [ 1.148862] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.148872] ohci_hcd 0000:00:12.0: control 0x083 HCFS=operational CBSR=3 [ 1.148881] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 [ 1.148890] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF [ 1.148899] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.148912] ohci_hcd 0000:00:12.0: hcca frame #0005 [ 1.148921] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) [ 1.148930] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.148938] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE [ 1.148947] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS [ 1.148956] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS [ 1.148965] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS [ 1.148974] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS [ 1.148983] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS [ 1.149019] usb usb4: default language 0x0409 [ 1.149036] usb usb4: udev 1, busnum 4, minor = 384 [ 1.149042] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.149132] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.149256] usb usb4: Product: OHCI Host Controller [ 1.149341] usb usb4: Manufacturer: Linux 3.4.9-gentoo ohci_hcd [ 1.149428] usb usb4: SerialNumber: 0000:00:12.0 [ 1.150029] usb usb4: usb_probe_device [ 1.150044] usb usb4: configuration #1 chosen from 1 choice [ 1.150074] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.150559] hub 4-0:1.0: usb_probe_interface [ 1.150572] hub 4-0:1.0: usb_probe_interface - got id [ 1.150579] hub 4-0:1.0: USB hub found [ 1.150690] hub 4-0:1.0: 5 ports detected [ 1.150773] hub 4-0:1.0: standalone hub [ 1.150778] hub 4-0:1.0: no power switching (usb 1.0) [ 1.150783] hub 4-0:1.0: no over-current protection [ 1.150789] hub 4-0:1.0: power on to power good time: 4ms [ 1.150839] hub 4-0:1.0: local power source is good [ 1.150846] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.150905] drivers/usb/core/inode.c: creating file '001' [ 1.151059] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.151158] drivers/usb/core/inode.c: creating file '005' [ 1.151598] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.151740] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk [ 1.151782] ohci_hcd 0000:00:13.0: created debug files [ 1.151787] ohci_hcd 0000:00:13.0: supports USB remote wakeup [ 1.151839] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb48000 [ 1.175921] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.183908] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.192110] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 1.206995] ohci_hcd 0000:00:13.0: OHCI controller state [ 1.207011] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.207022] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 [ 1.207031] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.207040] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF [ 1.207049] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.207063] ohci_hcd 0000:00:13.0: hcca frame #0005 [ 1.207072] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) [ 1.207080] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.207088] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 1.207098] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.207106] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.207115] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 1.207124] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS [ 1.207132] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS [ 1.207176] usb usb5: default language 0x0409 [ 1.207194] usb usb5: udev 1, busnum 5, minor = 512 [ 1.207200] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.207297] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.207420] usb usb5: Product: OHCI Host Controller [ 1.207505] usb usb5: Manufacturer: Linux 3.4.9-gentoo ohci_hcd [ 1.207592] usb usb5: SerialNumber: 0000:00:13.0 [ 1.208255] usb usb5: usb_probe_device [ 1.208270] usb usb5: configuration #1 chosen from 1 choice [ 1.208300] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.208660] hub 5-0:1.0: usb_probe_interface [ 1.208666] hub 5-0:1.0: usb_probe_interface - got id [ 1.208673] hub 5-0:1.0: USB hub found [ 1.208810] hub 5-0:1.0: 5 ports detected [ 1.208892] hub 5-0:1.0: standalone hub [ 1.208897] hub 5-0:1.0: no power switching (usb 1.0) [ 1.208902] hub 5-0:1.0: no over-current protection [ 1.208908] hub 5-0:1.0: power on to power good time: 4ms [ 1.208920] hub 5-0:1.0: local power source is good [ 1.208926] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.208974] drivers/usb/core/inode.c: creating file '001' [ 1.209112] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.209205] drivers/usb/core/inode.c: creating file '006' [ 1.209488] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.209627] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk [ 1.209673] ohci_hcd 0000:00:14.5: created debug files [ 1.209679] ohci_hcd 0000:00:14.5: supports USB remote wakeup [ 1.209704] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb46000 [ 1.250793] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.264942] ohci_hcd 0000:00:14.5: OHCI controller state [ 1.264958] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running [ 1.264969] ohci_hcd 0000:00:14.5: control 0x083 HCFS=operational CBSR=3 [ 1.264978] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 [ 1.264987] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF [ 1.264996] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.265010] ohci_hcd 0000:00:14.5: hcca frame #0005 [ 1.265019] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2) [ 1.265027] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.265035] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE [ 1.265044] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS [ 1.265053] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS [ 1.265099] usb usb6: default language 0x0409 [ 1.265117] usb usb6: udev 1, busnum 6, minor = 640 [ 1.265123] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.265219] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.265340] usb usb6: Product: OHCI Host Controller [ 1.265424] usb usb6: Manufacturer: Linux 3.4.9-gentoo ohci_hcd [ 1.265510] usb usb6: SerialNumber: 0000:00:14.5 [ 1.266175] usb usb6: usb_probe_device [ 1.266190] usb usb6: configuration #1 chosen from 1 choice [ 1.266222] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.266685] hub 6-0:1.0: usb_probe_interface [ 1.266733] hub 6-0:1.0: usb_probe_interface - got id [ 1.266740] hub 6-0:1.0: USB hub found [ 1.266850] hub 6-0:1.0: 2 ports detected [ 1.266933] hub 6-0:1.0: standalone hub [ 1.266938] hub 6-0:1.0: no power switching (usb 1.0) [ 1.266943] hub 6-0:1.0: no over-current protection [ 1.266949] hub 6-0:1.0: power on to power good time: 4ms [ 1.266961] hub 6-0:1.0: local power source is good [ 1.266967] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.267035] drivers/usb/core/inode.c: creating file '001' [ 1.267166] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.267265] drivers/usb/core/inode.c: creating file '007' [ 1.267561] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.267713] ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk [ 1.267749] ohci_hcd 0000:00:16.0: created debug files [ 1.267755] ohci_hcd 0000:00:16.0: supports USB remote wakeup [ 1.267779] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb45000 [ 1.308995] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.322876] ohci_hcd 0000:00:16.0: OHCI controller state [ 1.322889] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.322899] ohci_hcd 0000:00:16.0: control 0x083 HCFS=operational CBSR=3 [ 1.322905] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0 [ 1.322913] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF [ 1.322920] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.322932] ohci_hcd 0000:00:16.0: hcca frame #0005 [ 1.322939] ohci_hcd 0000:00:16.0: roothub.a 02001204 POTPGT=2 NOCP NPS NDP=4(4) [ 1.322946] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.322952] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE [ 1.322959] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS [ 1.322966] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS [ 1.322973] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS [ 1.322980] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS [ 1.323031] usb usb7: default language 0x0409 [ 1.323045] usb usb7: udev 1, busnum 7, minor = 768 [ 1.323050] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.323140] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.323255] usb usb7: Product: OHCI Host Controller [ 1.323335] usb usb7: Manufacturer: Linux 3.4.9-gentoo ohci_hcd [ 1.323416] usb usb7: SerialNumber: 0000:00:16.0 [ 1.323995] usb usb7: usb_probe_device [ 1.324007] usb usb7: configuration #1 chosen from 1 choice [ 1.324033] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.324341] hub 7-0:1.0: usb_probe_interface [ 1.324346] hub 7-0:1.0: usb_probe_interface - got id [ 1.324351] hub 7-0:1.0: USB hub found [ 1.324444] hub 7-0:1.0: 4 ports detected [ 1.324522] hub 7-0:1.0: standalone hub [ 1.324525] hub 7-0:1.0: no power switching (usb 1.0) [ 1.324529] hub 7-0:1.0: no over-current protection [ 1.324534] hub 7-0:1.0: power on to power good time: 4ms [ 1.324543] hub 7-0:1.0: local power source is good [ 1.324548] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.324581] drivers/usb/core/inode.c: creating file '001' [ 1.324846] uhci_hcd: USB Universal Host Controller Interface driver [ 1.325284] usbcore: registered new interface driver usblp [ 1.325364] Initializing USB Mass Storage driver... [ 1.325589] usbcore: registered new interface driver usb-storage [ 1.325683] USB Mass Storage support registered. [ 1.325910] usbcore: registered new interface driver libusual [ 1.326671] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.327381] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.327491] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.327970] mousedev: PS/2 mouse device common for all mice [ 1.328816] rtc_cmos 00:05: RTC can wake from S4 [ 1.329231] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.329378] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.329931] md: linear personality registered for level -1 [ 1.330028] md: raid0 personality registered for level 0 [ 1.330114] md: raid1 personality registered for level 1 [ 1.330199] md: raid6 personality registered for level 6 [ 1.330284] md: raid5 personality registered for level 5 [ 1.330369] md: raid4 personality registered for level 4 [ 1.330996] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.331660] cpuidle: using governor ladder [ 1.331857] cpuidle: using governor menu [ 1.331942] EFI Variables Facility v0.08 2004-May-17 [ 1.335728] usbcore: registered new interface driver usbhid [ 1.335829] usbhid: USB HID core driver [ 1.336596] Netfilter messages via NETLINK v0.30. [ 1.336825] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.337668] ctnetlink v0.93: registering with nfnetlink. [ 1.338122] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.338328] TCP: cubic registered [ 1.338411] Initializing XFRM netlink socket [ 1.339753] NET: Registered protocol family 10 [ 1.340613] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.340857] IPv6 over IPv4 tunneling driver [ 1.341548] NET: Registered protocol family 17 [ 1.341696] Registering the dns_resolver key type [ 1.343047] console [netcon0] enabled [ 1.343143] netconsole: network logging started [ 1.365668] ata5: SATA link down (SStatus 0 SControl 300) [ 1.366879] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.423912] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 1.520730] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.520867] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.520990] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.521094] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.521519] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.521632] ata1.00: ATA-8: OCZ-VERTEX PLUS R2, 1.2, max UDMA/133 [ 1.521736] ata1.00: 241612976 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.521865] ata4.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.521947] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.522060] ata3.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.522154] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.522258] ata2.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.522342] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.522559] ata1.00: configured for UDMA/133 [ 1.522851] ata6.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133 [ 1.522954] ata6.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.522967] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX PLUS 1.2 PQ: 0 ANSI: 5 [ 1.523356] ata3.00: configured for UDMA/133 [ 1.523469] ata4.00: configured for UDMA/133 [ 1.523566] ata2.00: configured for UDMA/133 [ 1.523936] ata6.00: configured for UDMA/133 [ 1.524085] sd 0:0:0:0: [sda] 241612976 512-byte logical blocks: (123 GB/115 GiB) [ 1.524336] sd 0:0:0:0: [sda] Write Protect is off [ 1.524418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.524478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.524657] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.525166] scsi 1:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.525800] sda: sda1 sda2 sda3 [ 1.526358] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.526521] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.527011] sd 1:0:0:0: [sdb] Write Protect is off [ 1.527112] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.527189] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.527386] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.527550] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.528127] scsi 2:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.528815] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.528948] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.529263] sd 2:0:0:0: [sdc] Write Protect is off [ 1.529356] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.529400] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.529558] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.530039] scsi 3:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.532185] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.532325] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 1.532763] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.532903] sdb: sdb1 [ 1.533100] sd 3:0:0:0: [sdd] Write Protect is off [ 1.533192] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.533254] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.533675] scsi 5:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 1.533878] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.534659] sd 5:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.534792] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 1.535071] sd 5:0:0:0: [sde] Write Protect is off [ 1.535172] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.535244] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.535261] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 1.541399] sdd: sdd1 [ 1.542753] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.546730] sde: sde1 [ 1.547787] sd 5:0:0:0: [sde] Attached SCSI disk [ 1.557327] sdc: sdc1 [ 1.558631] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.561188] Freeing unused kernel memory: 628k freed [ 1.561649] Write protecting the kernel read-only data: 12288k [ 1.572591] Freeing unused kernel memory: 1320k freed [ 1.589074] Freeing unused kernel memory: 1988k freed [ 1.593979] echo used greatest stack depth: 5024 bytes left [ 1.714301] Refined TSC clocksource calibration: 1000.013 MHz. [ 1.714318] Switching to clocksource tsc [ 1.853845] EXT3-fs (sda2): recovery required on readonly filesystem [ 1.853859] EXT3-fs (sda2): write access will be enabled during recovery [ 1.872152] kjournald starting. Commit interval 5 seconds [ 1.872533] EXT3-fs (sda2): recovery complete [ 1.872540] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 1.872920] mount used greatest stack depth: 4584 bytes left [ 1.982073] init-early.sh used greatest stack depth: 3600 bytes left [ 2.463586] udevd[1335]: starting version 171 [ 2.800664] mdadm: sending ioctl 1261 to a partition! [ 2.800676] mdadm: sending ioctl 1261 to a partition! [ 2.801174] mdadm: sending ioctl 1261 to a partition! [ 2.801183] mdadm: sending ioctl 1261 to a partition! [ 2.801470] mdadm: sending ioctl 1261 to a partition! [ 2.801476] mdadm: sending ioctl 1261 to a partition! [ 2.802280] mdadm: sending ioctl 1261 to a partition! [ 2.802289] mdadm: sending ioctl 1261 to a partition! [ 2.802852] mdadm: sending ioctl 1261 to a partition! [ 2.802887] mdadm: sending ioctl 1261 to a partition! [ 2.816500] md: bind [ 2.826813] md: bind [ 2.888659] md: bind [ 2.916484] md: bind [ 2.923984] bio: create slab at 1 [ 2.924029] md/raid:md127: device sde1 operational as raid disk 3 [ 2.924036] md/raid:md127: device sdd1 operational as raid disk 2 [ 2.924043] md/raid:md127: device sdb1 operational as raid disk 0 [ 2.924049] md/raid:md127: device sdc1 operational as raid disk 1 [ 2.925074] md/raid:md127: allocated 4300kB [ 2.925921] md/raid:md127: raid level 6 active with 4 out of 4 devices, algorithm 2 [ 2.925928] RAID conf printout: [ 2.925932] --- level:6 rd:4 wd:4 [ 2.925938] disk 0, o:1, dev:sdb1 [ 2.925943] disk 1, o:1, dev:sdc1 [ 2.925948] disk 2, o:1, dev:sdd1 [ 2.925953] disk 3, o:1, dev:sde1 [ 2.926027] md127: detected capacity change from 0 to 3000598790144 [ 2.934953] md127: unknown partition table [ 16.791018] EXT3-fs (sda2): using internal journal [ 16.910109] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 16.915037] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 16.917920] kjournald starting. Commit interval 5 seconds [ 16.918114] EXT3-fs (dm-1): using internal journal [ 16.918124] EXT3-fs (dm-1): mounted filesystem with writeback data mode [ 16.921191] EXT4-fs (dm-2): mounting ext2 file system using the ext4 subsystem [ 16.939503] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null) [ 16.944414] EXT4-fs (dm-3): mounting ext2 file system using the ext4 subsystem [ 16.948686] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null) [ 16.954721] kjournald starting. Commit interval 5 seconds [ 16.954970] EXT3-fs (dm-8): using internal journal [ 16.954977] EXT3-fs (dm-8): mounted filesystem with writeback data mode [ 16.959896] kjournald starting. Commit interval 5 seconds [ 16.960135] EXT3-fs (dm-4): using internal journal [ 16.960148] EXT3-fs (dm-4): mounted filesystem with writeback data mode [ 16.962339] EXT4-fs (dm-6): mounting ext2 file system using the ext4 subsystem [ 16.969709] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (null) [ 16.973511] kjournald starting. Commit interval 5 seconds [ 16.973675] EXT3-fs (dm-7): using internal journal [ 16.973685] EXT3-fs (dm-7): mounted filesystem with writeback data mode [ 16.976186] EXT4-fs (dm-5): mounting ext2 file system using the ext4 subsystem [ 16.985761] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null) [ 34.800706] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 36.399181] r8169 0000:04:00.0: eth0: link down [ 36.399238] r8169 0000:04:00.0: eth0: link down [ 36.399269] NOHZ: local_softirq_pending 08 [ 36.401709] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.892968] r8169 0000:04:00.0: eth0: link up [ 39.895005] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 50.279534] eth0: no IPv6 routers present [28515.365475] svc: 192.168.1.2, port=867: unknown version (4 for prog 100003, nfsd) [35101.826124] general protection fault: 0000 [#1] SMP [35101.826153] CPU 0 [35101.826161] Modules linked in: k10temp [35101.826179] [35101.826190] Pid: 568, comm: kswapd0 Not tainted 3.4.9-gentoo #9 System manufacturer System Product Name/C60M1-I [35101.826224] RIP: 0010:[] [] drop_buffers+0x28/0xb0 [35101.826260] RSP: 0018:ffff880234eff9a0 EFLAGS: 00010206 [35101.826276] RAX: 0000000000000000 RBX: ffffea00048dab40 RCX: 0000000000000000 [35101.826295] RDX: 0000000000000000 RSI: ffff880234eff9d8 RDI: ffbf8801332bdf08 [35101.826314] RBP: ffff880234eff9c0 R08: dead000000200200 R09: dead000000100100 [35101.826333] R10: ffff880234effbb8 R11: ffff880234effbc0 R12: ffff8802365e55a0 [35101.826352] R13: ffff8801332bdf08 R14: ffff880234eff9d8 R15: 0000000000000001 [35101.826373] FS: 00007fb00bc26700(0000) GS:ffff88023ec00000(0000) knlGS:0000000000000000 [35101.826395] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [35101.826411] CR2: 000000000065dd00 CR3: 000000022b4fd000 CR4: 00000000000007f0 [35101.826464] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [35101.826516] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [35101.826569] Process kswapd0 (pid: 568, threadinfo ffff880234efe000, task ffff88023597be70) [35101.826655] Stack: [35101.826696] ffffea00048dab40 ffff8802365e55a0 0000000000000000 ffffea00048dab40 [35101.826789] ffff880234effa00 ffffffff81146090 ffff880234eff9f0 0000000000000000 [35101.826882] ffff8802365e55a0 ffff880234effd90 ffff880234effba0 ffffea00048dab60 [35101.826975] Call Trace: [35101.827023] [] try_to_free_buffers+0x50/0xb0 [35101.827076] [] blkdev_releasepage+0x3d/0x50 [35101.827130] [] try_to_release_page+0x2d/0x40 [35101.827185] [] shrink_page_list+0x762/0x910 [35101.827239] [] ? __mod_zone_page_state+0x44/0x50 [35101.827293] [] ? update_isolated_counts.clone.55+0x114/0x130 [35101.827383] [] shrink_inactive_list+0x244/0x4c0 [35101.827437] [] shrink_mem_cgroup_zone+0x3b4/0x4f0 [35101.827491] [] ? prune_super+0x192/0x1b0 [35101.827545] [] balance_pgdat+0x542/0x730 [35101.827598] [] kswapd+0x169/0x3c0 [35101.827649] [] ? wake_up_bit+0x40/0x40 [35101.827701] [] ? balance_pgdat+0x730/0x730 [35101.827752] [] kthread+0x96/0xa0 [35101.827804] [] kernel_thread_helper+0x4/0x10 [35101.827856] [] ? flush_kthread_worker+0xb0/0xb0 [35101.827909] [] ? gs_change+0xb/0xb [35101.827955] Code: 00 00 00 55 48 89 e5 41 56 49 89 f6 41 55 41 54 53 48 8b 07 48 89 fb f6 c4 08 0f 84 8e 00 00 00 4c 8b 6f 30 4c 89 ef 0f 1f 40 00 <48> 8b 07 f6 c4 08 74 0e 48 8b 43 08 48 85 c0 74 05 f0 80 48 7b [35101.828240] RIP [] drop_buffers+0x28/0xb0 [35101.828294] RSP [35101.828669] ---[ end trace 7979c35d1c9be633 ]--- [35161.769980] INFO: rcu_sched self-detected stall on CPU { 1} (t=60000 jiffies) [35161.770288] Pid: 3339, comm: dd Tainted: G D 3.4.9-gentoo #9 [35161.771507] Call Trace: [35161.771588] [] __rcu_pending+0x206/0x490 [35161.771735] [] rcu_check_callbacks+0xb0/0x170 [35161.771828] [] update_process_times+0x43/0x80 [35161.771918] [] tick_sched_timer+0x5f/0xb0 [35161.772008] [] __run_hrtimer+0x78/0x1c0 [35161.772097] [] ? tick_nohz_handler+0xe0/0xe0 [35161.772187] [] hrtimer_interrupt+0xf6/0x240 [35161.772278] [] smp_apic_timer_interrupt+0x64/0xa0 [35161.772371] [] apic_timer_interrupt+0x67/0x70 [35161.772458] [] ? _raw_spin_lock+0x1a/0x30 [35161.772597] [] create_empty_buffers+0x4b/0xd0 [35161.772689] [] block_read_full_page+0x2c8/0x390 [35161.772780] [] ? I_BDEV+0x10/0x10 [35161.772869] [] ? __inc_zone_page_state+0x2e/0x30 [35161.772961] [] ? add_to_page_cache_locked+0x8b/0xe0 [35161.773052] [] blkdev_readpage+0x13/0x20 [35161.773142] [] __do_page_cache_readahead+0x1d9/0x260 [35161.773234] [] ra_submit+0x1c/0x20 [35161.773321] [] ondemand_readahead+0x10d/0x230 [35161.773413] [] ? copy_user_generic_string+0x2d/0x40 [35161.773503] [] page_cache_async_readahead+0x80/0xa0 [35161.773596] [] generic_file_aio_read+0x48b/0x780 [35161.773688] [] do_sync_read+0xe2/0x120 [35161.773778] [] ? security_file_permission+0x93/0xb0 [35161.773869] [] vfs_read+0xc3/0x170 [35161.773956] [] sys_read+0x4c/0x90 [35161.774044] [] ? system_call_after_swapgs+0x17/0x59 [35161.774135] [] system_call_fastpath+0x16/0x1b