Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ---------
- TS-219P
- ---------
- 00:00.0 Memory controller: Marvell Technology Group Ltd. Device 6281 (rev 02)
- Subsystem: Marvell Technology Group Ltd. Device 11ab
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 9
- Region 0: Memory at <ignored> (64-bit, prefetchable)
- Capabilities: [40] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
- Address: 0000000000000000 Data: 0000
- Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
- ExtTag- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited
- ClockPM+ Suprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [100] Advanced Error Reporting <?>
- 00:01.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
- Subsystem: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 9
- Region 5: Memory at e0010000 (32-bit, non-prefetchable) [size=8K]
- [virtual] Expansion ROM at e0000000 [disabled] [size=64K]
- Capabilities: [68] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Suprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Kernel driver in use: ahci
- Kernel modules: ahci
- 00:01.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 85 [Master SecO PriO])
- Subsystem: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 9
- Region 0: I/O ports at f2000010 [disabled] [size=8]
- Region 1: I/O ports at f2000020 [disabled] [size=4]
- Region 2: I/O ports at f2000018 [disabled] [size=8]
- Region 3: I/O ports at f2000024 [disabled] [size=4]
- Region 4: I/O ports at f2000000 [disabled] [size=16]
- Capabilities: [68] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- ----------
- TS-219P+
- ----------
- 00:00.0 Memory controller: Marvell Technology Group Ltd. Device 6282
- Subsystem: Marvell Technology Group Ltd. Device 11ab
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 9
- Region 0: Memory at <ignored> (64-bit, prefetchable)
- Capabilities: [40] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
- ExtTag- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited
- ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
- 00:01.0 IDE interface: JMicron Technology Corp. Device 236f (rev 03) (prog-if 85 [Master SecO PriO])
- Subsystem: JMicron Technology Corp. Device 236f
- Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin A routed to IRQ 9
- Region 0: I/O ports at 1010 [disabled] [size=8]
- Region 1: I/O ports at 1020 [disabled] [size=4]
- Region 2: I/O ports at 1018 [disabled] [size=8]
- Region 3: I/O ports at 1024 [disabled] [size=4]
- Region 4: I/O ports at 1000 [disabled] [size=16]
- Region 5: Memory at e0010000 (32-bit, non-prefetchable) [disabled] [size=8K]
- [virtual] Expansion ROM at e0000000 [disabled] [size=64K]
- Capabilities: [68] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement