here is smartctl output for sdc, sdb & sda in this order.
root@rescue ~ # smartctl --all /dev/sdc
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST_M13FQBL
Serial Number: QNR_BFW
Firmware Version: 1117F38F
User Capacity: 4,142,054,400 bytes [4.14 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Mon Nov 18 14:42:22 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Error SMART Values Read failed: scsi error aborted command
Smartctl: SMART Read Values failed.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
Error SMART Error Log Read failed: scsi error aborted command
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: scsi error aborted command
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
root@rescue ~ # smartctl --all /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31500341AS
Serial Number: 9VS48G74
LU WWN Device Id: 5 000c50 026b5ba18
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Nov 18 14:42:28 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 87196730
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 60
7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 1007030093
9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 27148
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 15
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 274882101315
189 High_Fly_Writes 0x003a 021 021 000 Old_age Always - 79
190 Airflow_Temperature_Cel 0x0022 062 052 045 Old_age Always - 38 (Min/Max 38/38)
194 Temperature_Celsius 0x0022 038 048 000 Old_age Always - 38 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 042 036 000 Old_age Always - 87196730
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 213021787974155
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4170770584
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1652554606
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@rescue ~ # smartctl --all /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31500341AS
Serial Number: 9VS49LPR
LU WWN Device Id: 5 000c50 026c5211f
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Nov 18 14:42:36 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 105 087 006 Pre-fail Always - 187486275
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 8
5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 4095
7 Seek_Error_Rate 0x000f 086 057 030 Pre-fail Always - 9457085579
9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 27078
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 8
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 400
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 420913217663
189 High_Fly_Writes 0x003a 028 028 000 Old_age Always - 72
190 Airflow_Temperature_Cel 0x0022 063 046 045 Old_age Always - 37 (Min/Max 26/37)
194 Temperature_Celsius 0x0022 037 054 000 Old_age Always - 37 (0 24 0 0)
195 Hardware_ECC_Recovered 0x001a 044 038 000 Old_age Always - 187486275
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 20328080239046
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3230313850
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 535643002
SMART Error Log Version: 1
ATA Error Count: 224 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 224 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 01 00 00 00 a0 00 11d+08:50:46.614 IDENTIFY DEVICE
ff 00 00 00 00 00 00 00 11d+08:50:46.575 [VENDOR SPECIFIC]
00 00 00 00 00 00 00 ff 11d+08:50:46.575 NOP [Abort queued commands]
ff 00 00 00 00 00 00 00 11d+08:50:44.093 [VENDOR SPECIFIC]
00 00 00 00 00 00 00 ff 11d+08:50:44.093 NOP [Abort queued commands]
Error 223 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 11d+07:56:37.110 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 11d+07:56:37.103 IDENTIFY DEVICE
ff 00 00 00 00 00 00 00 11d+07:56:36.774 [VENDOR SPECIFIC]
00 00 00 00 00 00 00 ff 11d+07:56:36.773 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE
Error 222 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 11d+07:56:37.103 IDENTIFY DEVICE
ff 00 00 00 00 00 00 00 11d+07:56:36.774 [VENDOR SPECIFIC]
00 00 00 00 00 00 00 ff 11d+07:56:36.773 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE
Error 221 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE
ff 00 00 00 00 00 00 00 11d+07:56:31.432 [VENDOR SPECIFIC]
00 00 00 00 00 00 00 ff 11d+07:56:31.432 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 11d+07:56:31.353 IDENTIFY PACKET DEVICE
Error 220 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE
ff 00 00 00 00 00 00 00 11d+07:56:31.432 [VENDOR SPECIFIC]
00 00 00 00 00 00 00 ff 11d+07:56:31.432 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 11d+07:56:31.353 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 11d+07:56:31.346 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.