[42949374.880000] bugpm.c: TURBO mode (532 MHz@/1.55V enabled)
[42949374.890000] bugpm.c: BUGPM Driver v1.0
[42949374.900000] RNG Driver: Loading
[42949374.900000] SEC: mxc_sec_mod_init() called
[42949374.910000] bmi_init() - enter
[42949374.990000] bmi_init() - exit
[42949375.000000] Advanced Linux Sound Architecture Driver Version 1.0.17.
[42949375.010000] ALSA device list:
[42949375.010000] No soundcards found.
[42949375.010000] TCP cubic registered
[42949375.020000] NET: Registered protocol family 10
[42949375.020000] Mobile IPv6
[42949375.030000] IPv6 over IPv4 tunneling driver
[42949375.030000] NET: Registered protocol family 17
[42949375.040000] Power Management for Freescale MX31
[42949375.040000] VFP support v0.3: implementor 41 architecture 1 part 20 varia2
[42949375.050000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[42949375.060000] Waiting 1sec before mounting root device...
[42949375.080000] MMC Clock at: 25000000
[42949375.080000] mmc0: host does not support reading read-only switch. assumin.
[42949375.090000] mmc0: new SD card at address 8fe4
[42949375.090000] mmcblk0: mmc0:8fe4 SU02G 1931264KiB
[42949375.100000] mmcblk0: p1
[42949375.170000] MMC Clock at: 25000000
[42949375.180000] mmc1: new SDIO card at address 0001
[42949376.080000] kjournald starting. Commit interval 5 seconds
[42949376.090000] EXT3 FS on mmcblk0p1, internal journal
[42949376.100000] EXT3-fs: mounted filesystem with ordered data mode.
[42949376.110000] VFS: Mounted root (ext3 filesystem).
[42949376.110000] Freeing init memory: 112K
INIT: version 2.86 booting
.udev/ already exists on the static /dev!
Starting the hotplug events dispatcher udevd
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
[42949386.620000] input: bmi_lcd_ts0 as /class/input/input0
[42949386.650000] input: bmi_lcd_ts1 as /class/input/input1
[42949386.680000] input: bmi_lcd_ts2 as /class/input/input2
[42949386.720000] input: bmi_lcd_ts3 as /class/input/input3
[42949386.760000] input: bmi_lcd_ts4 as /class/input/input4
[42949386.800000] input: bmi_lcd_ts5 as /class/input/input5
[42949386.840000] input: bmi_lcd_ts6 as /class/input/input6
[42949386.930000] bmi_gps.c: probe slot 0
[42949386.940000] BMI MDACC Driver v1.0
[42949388.100000] bmi_vh.c: probe slot 2
[42949388.210000] bmi_vh.c: probe RDAC = 0xac
[42949388.220000] bmi_vh.c: probe ADC = 0x7eb080
[42949388.220000] bmi_vh.c: probe DAC = 0xf00
[42949388.450000] bmi_gps.c: BMI_GPS Driver v1.1
[42949388.460000] bmi_lcd.c: probe slot 3
[42949388.970000] bmi_lcd.c set backlight drive to 25 mA
[42949388.980000] bmi_lcd.c: probe slot 3
[42949388.980000] bmi_lcd.c: probe slot 3 hardware version = 0x13
[42949389.020000] acc_probe<7>
[42949389.020000] About to cdev_init acc=bf013858 cdev=bf013858
[42949389.020000] acc_fops=bf013168
[42949391.180000] bmi_lcd.c: slot 3 gpio = f
[42949391.190000] bmi_lcd.c: LCD count = 1
[42949391.200000] bmi_vh.c: BMI_VH Driver v1.0
[42949391.210000] bmi_lcd.c: BMI_LCD Driver v1.2
[42949399.290000] ARC USBOTG Device Controller driver version 1 August 2005 ini
[42949399.410000] arcotg_udc creating dma pool...
[42949399.410000] ARC USBOTG h/w ID=0x5 revision=0x40
[42949399.490000] BUG Audio driver loading...
[42949399.500000] bug_audio.c: FACTORY TEST extensions enabled
[42949399.500000] Control ALSA component registered
[42949399.530000] baseunit_probe
[42949399.530000] baseunit.c: probe() - reg 1:1 = 400 (status register)
[42949399.560000] Device spi2.0 probed
[42949399.640000] BUG Camera Driver v1.0
[42949399.640000] input: bug_cam as /class/input/input7
[42949399.710000] BUG V4L2 Caputure Driver v1.0
[42949399.760000] init_camera_struct() - cam->pre_still_buf_size = 3842048
[42949399.770000] init_camera_struct() - cam->pre_still_buf_vaddr = ff804000
[42949399.780000] init_camera_struct() - cam->pre_still_buf = 80800000
[42949399.860000] bugnav.c: Allocating bugnav/input_dev
[42949399.870000] bugnav.c: Requesting irq 165
[42949399.870000] bugnav.c: irq granted165
[42949399.880000] bugnav.c enable_irq_wake
[42949399.880000] bugnav.c: Registering input device
[42949399.890000] input: bugnav as /class/input/input8
[42949399.930000] bugnav.c: Registering Control Device
[42949400.000000] APM Battery Driver
[42949400.030000] Current: 0x123f
[42949400.040000] Voltage: 0x359f
[42949400.090000] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[42949400.100000] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus num1
[42949400.140000] fsl-ehci fsl-ehci.0: irq 36, io mem 0x43f88400
[42949400.160000] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 De4
[42949400.160000] usb usb1: configuration #1 chosen from 1 choice
[42949400.180000] hub 1-0:1.0: USB hub found
[42949400.180000] hub 1-0:1.0: 1 port detected
[42949400.400000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[42949400.400000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNum1
[42949400.430000] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[42949400.460000] usb usb1: Manufacturer: Linux 2.6.27.2 ehci_hcd
[42949400.460000] usb usb1: SerialNumber: fsl-ehci.0
[42949400.470000] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[42949400.480000] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus num2
[42949400.490000] fsl-ehci fsl-ehci.1: can't setup
[42949400.500000] fsl-ehci fsl-ehci.1: USB bus 2 deregistered
[42949400.510000] fsl-ehci fsl-ehci.1: init fsl-ehci.1 fail, -110
[42949400.510000] fsl-ehci: probe of fsl-ehci.1 failed with error -110
[42949400.540000] usb 1-1: new high speed USB device using fsl-ehci and address2
[42949400.570000] g_ether gadget: using random self ethernet address
[42949400.580000] usb0: MAC 92:92:b2:46:a7:46
[42949400.590000] usb0: HOST MAC 46:0d:9e:67:69:eb
[42949400.590000] g_ether gadget: controller 'arc_udc' not recognized; trying C)
[42949400.600000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[42949400.610000] g_ether gadget: g_ether ready
[42949400.610000] arcotg_udc: gadget arc_udc bound to driver g_ether
[42949400.690000] usb 1-1: configuration #1 chosen from 1 choice
[42949400.710000] hub 1-1:1.0: USB hub found
[42949400.720000] hub 1-1:1.0: 6 ports detected
[42949400.790000] Bluetooth: Core ver 2.13
[42949400.790000] NET: Registered protocol family 31
[42949400.800000] Bluetooth: HCI device and connection manager initialized
[42949400.810000] Bluetooth: HCI socket layer initialized
[42949400.860000] Bluetooth: L2CAP ver 2.11
[42949400.860000] Bluetooth: L2CAP socket layer initialized
[42949400.900000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[42949400.950000] usb 1-1: New USB device found, idVendor=0424, idProduct=2507
[42949400.950000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumb0
[42949401.060000] usb 1-1.5: new full speed USB device using fsl-ehci and addre3
[42949401.090000] libertas_sdio: Libertas SDIO driver
[42949401.090000] libertas_sdio: Copyright Pierre Ossman
[42949401.100000] firmware: requesting sd8686_helper.bin
[42949401.210000] usb 1-1.5: configuration #1 chosen from 1 choice
[42949401.230000] firmware: requesting sd8686.bin
[42949401.240000] usb 1-1.5: New USB device found, idVendor=0a12, idProduct=0001
[42949401.260000] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNu0
[42949401.420000] Bluetooth: Generic Bluetooth USB driver ver 0.3
[42949401.480000] usbcore: registered new interface driver btusb
[42949401.960000] libertas: 00:19:88:20:28:a5, fw 9.70.3p14, cap 0x00000303
[42949402.040000] libertas: PREP_CMD: command 0x00a3 failed: 2
[42949402.060000] libertas: PREP_CMD: command 0x00a3 failed: 2
[42949402.060000] libertas: eth1: Marvell WLAN 802.11 adapter
[42949402.150000] Bluetooth: RFCOMM socket layer initialized
[42949402.160000] Bluetooth: RFCOMM TTY layer initialized
[42949402.160000] Bluetooth: RFCOMM ver 1.10
[42949402.280000] isl12026_rtc isl12026_rtc.0: rtc core: registered isl12026_rt0
[42949402.280000] rtc12026.c: Real Time clock Driver v1.0
ALSA: Restoring mixer settings...
Starting portmap daemon: portmap.
Configuring liberation-fonts
/usr/share/fonts: failed to write cache
/usr/share/fonts/ttf: failed to write cache
postinst script returned status 2
ERROR: liberation-fonts.postinst returned 2
Nothing to be done
INIT: Entering runlevel: 5
Starting Xserver
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: apmd[3196]: apmd 3.2.1 interfacing w2
apmd.
Warning: mode not found, using default
Starting system message bus: Extended Input Devices not yet supported. Impelemec
dbus.
D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-zAZknZSYpl,guid=4c4
starting DNS forwarder and DHCP server: dnsmasq... Warning: mode not found, usit
Extended Input Devices not yet supported. Impelement it at line 637 in kinput.c
done.
D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-deXLacOdLS,guid=884
Starting Network Interface Plugging Daemon:[42949419.590000] eth0: link down
[42949419.590000] ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0.
Starting syslogd/klogd: done
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... [42949421.660000] ADDRCONF(NETDEV_UP): usb0: y
usb0 no wireless extensions.
SIOCSIFHWADDR: Device or resource busy
[42949424.290000] ADDRCONF(NETDEV_UP): eth1: link is not ready
udhcpc (v0.9.9-pre) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background.
done.
Starting Bluetooth subsystem: hcid hid2hci.
Starting Connection Manager
Starting Concierge.
start-stop-daemon: unable to start -_P> _Par/log/concierge.log 2>&1 &: No suchy
Starting NTP Client.
BUG Linux 1.4.3 BUG ttymxc4
BUG login: