[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11-1.slh.1-aptosid-amd64 (Debian 3.11-4) (s.l-h@gmx.de) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP PREEMPT Mon Sep 16 04:18:52 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11-1.slh.1-aptosid-amd64 root=/dev/mapper/swag-root ro cryptopts=source=UUID=7432c1be-a967-4625-b7d6-f9fce74e8606,target=sexual_intercourse,lvm=swag-root quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire X3400/Aspire X3400, BIOS P01-B3 02/16/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001a0000000 aka 6656M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01745000, 0x01745fff] PGTABLE
[ 0.000000] BRK [0x01746000, 0x01746fff] PGTABLE
[ 0.000000] BRK [0x01747000, 0x01747fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x19fe00000-0x19fffffff]
[ 0.000000] [mem 0x19fe00000-0x19fffffff] page 2M
[ 0.000000] BRK [0x01748000, 0x01748fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19fdfffff]
[ 0.000000] [mem 0x19c000000-0x19fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff]
[ 0.000000] [mem 0x180000000-0x19bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x36630000-0x3730ffff]
[ 0.000000] ACPI: RSDP 00000000000fb6a0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffa0100 0007C (v01 ACRSYS ACRPRDCT 20110216 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffa0290 000F4 (v04 021611 FACP1341 20110216 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffa05e0 08F25 (v02 EUP78 P01-B3 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffae000 00040
[ 0.000000] ACPI: APIC 00000000cffa0390 00090 (v02 021611 APIC1341 20110216 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffa0420 0003C (v01 021611 OEMMCFG 20110216 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000cffa0460 00176 (v01 ACRSYS ACRPRDCT 20110216 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffae040 00073 (v01 021611 OEMB1341 20110216 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cffaa5e0 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cffaa6d0 00038 (v01 021611 OEMHPET0 20110216 MSFT 00000097)
[ 0.000000] ACPI: INFO 00000000cffae0c0 00124 (v01 021611 AMDINFO 20110216 MSFT 00000097)
[ 0.000000] ACPI: NVHD 00000000cffae1f0 00284 (v01 021611 NVHDCP 20110216 MSFT 00000097)
[ 0.000000] ACPI: AWMI 00000000cffae480 0004E (v01 021611 OEMB1341 20110216 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffaa710 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x19fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x19fffffff] -> [mem 0x00000000-0x19fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fffffff]
[ 0.000000] NODE_DATA [mem 0x19ffea000-0x19fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199a00000-ffff88019f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x19fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x19fffffff]
[ 0.000000] On node 0 totalpages: 1507132
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 10240 pages used for memmap
[ 0.000000] Normal zone: 655360 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80384 r8192 d22016 u262144
[ 0.000000] pcpu-alloc: s80384 r8192 d22016 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1483560
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-1.slh.1-aptosid-amd64 root=/dev/mapper/swag-root ro cryptopts=source=UUID=7432c1be-a967-4625-b7d6-f9fce74e8606,target=sexual_intercourse,lvm=swag-root quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 46b4000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 5781012K/6028528K available (3514K kernel code, 582K rwdata, 1500K rodata, 972K init, 844K bss, 247516K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 24117248 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 3099.983 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.96 BogoMIPS (lpj=3099983)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000026] Security Framework initialized
[ 0.000029] SELinux: Disabled at boot.
[ 0.000499] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002819] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003863] Mount-cache hash table entries: 256
[ 0.004021] Initializing cgroup subsys memory
[ 0.004033] Initializing cgroup subsys devices
[ 0.004035] Initializing cgroup subsys freezer
[ 0.004036] Initializing cgroup subsys net_cls
[ 0.004038] Initializing cgroup subsys blkio
[ 0.004039] Initializing cgroup subsys perf_event
[ 0.004056] tseg: 0000000000
[ 0.004062] CPU: Physical Processor ID: 0
[ 0.004063] CPU: Processor Core ID: 0
[ 0.004064] mce: CPU supports 6 MCE banks
[ 0.004070] LVT offset 0 assigned for vector 0xf9
[ 0.004074] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.004074] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.004074] tlb_flushall_shift: 4
[ 0.004124] Freeing SMP alternatives memory: 8K (ffffffff8166e000 - ffffffff81670000)
[ 0.004354] ACPI: Core revision 20130517
[ 0.007269] ACPI: All ACPI Tables successfully acquired
[ 0.008565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018558] smpboot: CPU0: AMD Athlon(tm) II X4 645 Processor (fam: 10, model: 05, stepping: 03)
[ 0.120176] Performance Events: AMD PMU driver.
[ 0.120180] ... version: 0
[ 0.120181] ... bit width: 48
[ 0.120182] ... generic registers: 4
[ 0.120183] ... value mask: 0000ffffffffffff
[ 0.120184] ... max period: 00007fffffffffff
[ 0.120185] ... fixed-purpose events: 0
[ 0.120186] ... event mask: 000000000000000f
[ 0.128256] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.171370] Brought up 4 CPUs
[ 0.171373] smpboot: Total of 4 processors activated (24799.86 BogoMIPS)
[ 0.172246] devtmpfs: initialized
[ 0.174903] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffeffff] (270336 bytes)
[ 0.175022] NET: Registered protocol family 16
[ 0.175101] node 0 link 0: io port [1000, ffffff]
[ 0.175103] TOM: 00000000e0000000 aka 3584M
[ 0.175105] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.175107] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.175110] node 0 link 0: mmio [a0000, bffff]
[ 0.175111] TOM2: 00000001a0000000 aka 6656M
[ 0.175119] bus: [bus 00-07] on node 0 link 0
[ 0.175120] bus: 00 [io 0x0000-0xffff]
[ 0.175122] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.175123] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.175124] bus: 00 [mem 0x1a0000000-0xfcffffffff]
[ 0.175169] ACPI: bus type PCI registered
[ 0.175171] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.175221] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.175223] PCI: not using MMCONFIG
[ 0.175224] PCI: Using configuration type 1 for base access
[ 0.175225] PCI: Using configuration type 1 for extended access
[ 0.175408] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.175409] mtrr: probably your BIOS does not setup all CPUs.
[ 0.175410] mtrr: corrected configuration.
[ 0.175959] bio: create slab <bio-0> at 0
[ 0.176061] ACPI: Added _OSI(Module Device)
[ 0.176062] ACPI: Added _OSI(Processor Device)
[ 0.176064] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176065] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.177199] ACPI: EC: Look up EC in DSDT
[ 0.178370] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.181180] ACPI: Interpreter enabled
[ 0.181185] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.181189] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.181200] ACPI: (supports S0 S3 S4 S5)
[ 0.181201] ACPI: Using IOAPIC for interrupt routing
[ 0.181222] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.181933] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.190597] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.190718] ACPI: No dock devices found.
[ 0.197768] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.198048] PCI host bridge to bus 0000:00
[ 0.198051] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.198053] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.198055] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.198057] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.198059] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.198061] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.198097] pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
[ 0.198404] pci 0000:00:01.0: [10de:075c] type 00 class 0x060100
[ 0.198412] pci 0000:00:01.0: reg 0x10: [io 0x4f00-0x4fff]
[ 0.198492] pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
[ 0.198504] pci 0000:00:01.1: reg 0x10: [io 0x4900-0x493f]
[ 0.198520] pci 0000:00:01.1: reg 0x20: [io 0x4d00-0x4d3f]
[ 0.198525] pci 0000:00:01.1: reg 0x24: [io 0x4e00-0x4e3f]
[ 0.198555] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.198596] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.198622] pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
[ 0.198713] pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
[ 0.198730] pci 0000:00:01.3: reg 0x10: [mem 0xfce80000-0xfcefffff]
[ 0.198882] pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
[ 0.198994] pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
[ 0.199003] pci 0000:00:02.0: reg 0x10: [mem 0xfce7f000-0xfce7ffff]
[ 0.199040] pci 0000:00:02.0: supports D1 D2
[ 0.199042] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199076] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.199106] pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
[ 0.199117] pci 0000:00:02.1: reg 0x10: [mem 0xfce7ec00-0xfce7ecff]
[ 0.199161] pci 0000:00:02.1: supports D1 D2
[ 0.199163] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199199] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.199233] pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
[ 0.199242] pci 0000:00:04.0: reg 0x10: [mem 0xfce7d000-0xfce7dfff]
[ 0.199278] pci 0000:00:04.0: supports D1 D2
[ 0.199280] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199319] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.199352] pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
[ 0.199363] pci 0000:00:04.1: reg 0x10: [mem 0xfce7e800-0xfce7e8ff]
[ 0.199406] pci 0000:00:04.1: supports D1 D2
[ 0.199408] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199444] pci 0000:00:04.1: System wakeup disabled by ACPI
[ 0.199478] pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
[ 0.199487] pci 0000:00:07.0: reg 0x10: [mem 0xfce78000-0xfce7bfff]
[ 0.199524] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.199558] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.199585] pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
[ 0.199650] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 0.199679] pci 0000:00:09.0: [10de:0ad4] type 00 class 0x010601
[ 0.199688] pci 0000:00:09.0: reg 0x10: [io 0xd480-0xd487]
[ 0.199693] pci 0000:00:09.0: reg 0x14: [io 0xd400-0xd403]
[ 0.199697] pci 0000:00:09.0: reg 0x18: [io 0xd080-0xd087]
[ 0.199701] pci 0000:00:09.0: reg 0x1c: [io 0xd000-0xd003]
[ 0.199706] pci 0000:00:09.0: reg 0x20: [io 0xcc00-0xcc0f]
[ 0.199710] pci 0000:00:09.0: reg 0x24: [mem 0xfce76000-0xfce77fff]
[ 0.199787] pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
[ 0.199798] pci 0000:00:0a.0: reg 0x10: [mem 0xfce7c000-0xfce7cfff]
[ 0.199802] pci 0000:00:0a.0: reg 0x14: [io 0xc880-0xc887]
[ 0.199807] pci 0000:00:0a.0: reg 0x18: [mem 0xfce7e400-0xfce7e4ff]
[ 0.199811] pci 0000:00:0a.0: reg 0x1c: [mem 0xfce7e000-0xfce7e00f]
[ 0.199844] pci 0000:00:0a.0: supports D1 D2
[ 0.199845] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199883] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.199913] pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400
[ 0.199941] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200045] pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
[ 0.200272] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200351] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.200420] pci 0000:00:12.0: [10de:075b] type 01 class 0x060400
[ 0.200645] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200718] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.200784] pci 0000:00:13.0: [10de:077a] type 01 class 0x060400
[ 0.201009] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201082] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.201110] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.201168] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.201222] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.201277] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.201342] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.201455] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.201460] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.201462] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.201463] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.201465] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.201467] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.201499] pci 0000:02:00.0: [10de:084b] type 00 class 0x030000
[ 0.201507] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.201514] pci 0000:02:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.201519] pci 0000:02:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.201524] pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f]
[ 0.201528] pci 0000:02:00.0: reg 0x30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.201578] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.201581] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.201584] pci 0000:00:0b.0: bridge window [mem 0xfcf00000-0xfdffffff]
[ 0.201587] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.201748] pci 0000:00:10.0: PCI bridge to [bus 03]
[ 0.201936] pci 0000:00:12.0: PCI bridge to [bus 04]
[ 0.202128] pci 0000:00:13.0: PCI bridge to [bus 05]
[ 0.202264] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.202428] acpi PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.202430] acpi PNP0A03:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.202829] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.202910] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.202989] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.203066] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.203150] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.203227] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.203305] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.203393] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.203471] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.203549] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.203626] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.203704] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.203784] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.203861] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.203939] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.204017] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.204099] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[ 0.204177] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.204255] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.204333] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.204411] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 0.204489] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.204568] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.204645] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.204723] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.204801] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.204880] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.204958] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.205036] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.205116] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.205195] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.205273] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.205355] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.205434] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.205512] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.205590] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.205670] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.205749] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[ 0.205828] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[ 0.205907] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.205987] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *14
[ 0.206066] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7
[ 0.206148] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 0.206227] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.206315] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.206395] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *14
[ 0.206475] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.206556] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.206562] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.206614] Found 1 acpi root devices
[ 0.206738] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.206740] vgaarb: loaded
[ 0.206741] vgaarb: bridge control possible 0000:02:00.0
[ 0.206783] PCI: Using ACPI for IRQ routing
[ 0.213329] PCI: pci_cache_line_size set to 64 bytes
[ 0.213385] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.213387] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.213467] NetLabel: Initializing
[ 0.213468] NetLabel: domain hash size = 128
[ 0.213469] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.213477] NetLabel: unlabeled traffic allowed by default
[ 0.213497] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.213502] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.213505] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.215977] Switched to clocksource hpet
[ 0.216034] pnp: PnP ACPI init
[ 0.216045] ACPI: bus type PNP registered
[ 0.216115] pnp 00:00: [dma 4]
[ 0.216134] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.216154] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.216181] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.216442] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.216444] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.216447] system 00:03: [io 0x4000-0x407f] could not be reserved
[ 0.216449] system 00:03: [io 0x4080-0x40ff] has been reserved
[ 0.216451] system 00:03: [io 0x4400-0x447f] has been reserved
[ 0.216453] system 00:03: [io 0x4480-0x44ff] has been reserved
[ 0.216454] system 00:03: [io 0x4800-0x487f] has been reserved
[ 0.216456] system 00:03: [io 0x4880-0x48ff] has been reserved
[ 0.216459] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.216461] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.216463] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.216466] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.216468] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.216470] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216561] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.216590] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.216663] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.216665] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.216667] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216705] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.216754] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.216888] system 00:09: [io 0x0a00-0x0a0f] has been reserved
[ 0.216890] system 00:09: [io 0x0a10-0x0a1f] has been reserved
[ 0.216892] system 00:09: [io 0x0a20-0x0a2f] has been reserved
[ 0.216894] system 00:09: [io 0x0a30-0x0a3f] has been reserved
[ 0.216896] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216948] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.216950] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217134] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.217137] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.217139] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.217141] system 00:0b: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.217143] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.217145] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.217657] pnp: PnP ACPI: found 12 devices
[ 0.217658] ACPI: bus type PNP unregistered
[ 0.223990] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 0.223998] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.224000] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.224003] pci 0000:00:0b.0: bridge window [mem 0xfcf00000-0xfdffffff]
[ 0.224006] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.224009] pci 0000:00:10.0: PCI bridge to [bus 03]
[ 0.224034] pci 0000:00:12.0: PCI bridge to [bus 04]
[ 0.224058] pci 0000:00:13.0: PCI bridge to [bus 05]
[ 0.224088] pci 0000:00:08.0: setting latency timer to 64
[ 0.224092] pci 0000:00:0b.0: setting latency timer to 64
[ 0.224322] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.224525] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.224720] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
[ 0.224732] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.224734] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.224736] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.224738] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.224740] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.224742] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.224743] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.224745] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.224747] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.224749] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.224751] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.224753] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfdffffff]
[ 0.224755] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.224786] NET: Registered protocol family 2
[ 0.224962] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.225279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.225545] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.225589] TCP: reno registered
[ 0.225602] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.225651] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.225757] NET: Registered protocol family 1
[ 0.226072] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.310246] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.310528] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.372182] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 0.372379] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.372479] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.372584] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.372689] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.372878] pci 0000:02:00.0: Boot video device
[ 0.372881] PCI: CLS 64 bytes, default 64
[ 0.372923] Unpacking initramfs...
[ 0.585396] Freeing initrd memory: 13184K (ffff880036630000 - ffff880037310000)
[ 0.585401] PCI-DMA: Disabling AGP.
[ 0.585497] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.585499] PCI-DMA: using GART IOMMU.
[ 0.585501] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.588463] LVT offset 1 assigned for vector 0x400
[ 0.588474] IBS: LVT offset 1 assigned
[ 0.588507] perf: AMD IBS detected (0x0000001f)
[ 0.588540] microcode: CPU0: patch_level=0x010000c8
[ 0.588554] microcode: CPU1: patch_level=0x010000c8
[ 0.588575] microcode: CPU2: patch_level=0x010000c8
[ 0.588595] microcode: CPU3: patch_level=0x010000c8
[ 0.588665] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.588870] audit: initializing netlink socket (disabled)
[ 0.588880] type=2000 audit(1379976301.485:1): initialized
[ 0.589419] bounce pool size: 64 pages
[ 0.589431] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.590910] zbud: loaded
[ 0.591110] VFS: Disk quotas dquot_6.5.2
[ 0.591146] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.591236] msgmni has been set to 11445
[ 0.591876] alg: No test for stdrng (krng)
[ 0.591888] Key type asymmetric registered
[ 0.591891] Asymmetric key parser 'x509' registered
[ 0.591944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.592040] io scheduler noop registered
[ 0.592043] io scheduler deadline registered
[ 0.592049] io scheduler cfq registered (default)
[ 0.592454] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.592465] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.592545] GHES: HEST is not enabled!
[ 0.592624] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.593106] Linux agpgart interface v0.103
[ 0.593156] libphy: Fixed MDIO Bus: probed
[ 0.593183] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.593659] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.593668] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.593758] mousedev: PS/2 mouse device common for all mice
[ 0.593793] rtc_cmos 00:05: RTC can wake from S4
[ 0.594059] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.594113] rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.594122] cpuidle: using governor ladder
[ 0.594123] cpuidle: using governor menu
[ 0.594395] TCP: cubic registered
[ 0.594480] NET: Registered protocol family 10
[ 0.594659] Key type dns_resolver registered
[ 0.594943] registered taskstats version 1
[ 0.595203] IMA: No TPM chip found, activating TPM-bypass!
[ 0.595939] rtc_cmos 00:05: setting system clock to 2013-09-23 22:45:02 UTC (1379976302)
[ 0.596567] Freeing unused kernel memory: 972K (ffffffff8157b000 - ffffffff8166e000)
[ 0.615949] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.664253] systemd-udevd[73]: starting version 204
[ 0.682389] ACPI: bus type USB registered
[ 0.682414] usbcore: registered new interface driver usbfs
[ 0.682423] usbcore: registered new interface driver hub
[ 0.682472] usbcore: registered new device driver usb
[ 0.682798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.682893] ehci-pci: EHCI PCI platform driver
[ 0.683076] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 0.683093] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.683102] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.683112] ehci-pci 0000:00:02.1: debug port 1
[ 0.683134] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.683157] ehci-pci 0000:00:02.1: irq 22, io mem 0xfce7ec00
[ 0.688576] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.688601] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.688604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688606] usb usb1: Product: EHCI Host Controller
[ 0.688608] usb usb1: Manufacturer: Linux 3.11-1.slh.1-aptosid-amd64 ehci_hcd
[ 0.688609] usb usb1: SerialNumber: 0000:00:02.1
[ 0.688731] hub 1-0:1.0: USB hub found
[ 0.688736] hub 1-0:1.0: 6 ports detected
[ 0.689093] ehci-pci 0000:00:04.1: setting latency timer to 64
[ 0.689100] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 0.689107] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.689115] ehci-pci 0000:00:04.1: debug port 1
[ 0.689133] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[ 0.689155] ehci-pci 0000:00:04.1: irq 20, io mem 0xfce7e800
[ 0.694531] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.694559] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.694561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.694563] usb usb2: Product: EHCI Host Controller
[ 0.694565] usb usb2: Manufacturer: Linux 3.11-1.slh.1-aptosid-amd64 ehci_hcd
[ 0.694567] usb usb2: SerialNumber: 0000:00:04.1
[ 0.694701] hub 2-0:1.0: USB hub found
[ 0.694706] hub 2-0:1.0: 6 ports detected
[ 0.718729] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.718993] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 0.719001] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.720917] SCSI subsystem initialized
[ 0.722164] ACPI: bus type ATA registered
[ 0.722272] libata version 3.00 loaded.
[ 0.771511] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr f8:0f:41:16:11:a4
[ 0.771515] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 0.771631] ahci 0000:00:09.0: version 3.0
[ 0.771892] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 0.771936] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.771950] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 0.772004] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.772007] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[ 0.772010] ahci 0000:00:09.0: setting latency timer to 64
[ 0.772752] scsi0 : ahci
[ 0.772860] scsi1 : ahci
[ 0.772914] scsi2 : ahci
[ 0.772991] scsi3 : ahci
[ 0.773044] scsi4 : ahci
[ 0.773097] scsi5 : ahci
[ 0.773149] ata1: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 40
[ 0.773151] ata2: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 40
[ 0.773153] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 40
[ 0.773154] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 40
[ 0.773156] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 40
[ 0.773158] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 40
[ 0.789795] device-mapper: uevent: version 1.0.3
[ 0.790011] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 1.077188] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.077207] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.078195] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.078213] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.078236] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.078256] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.081826] ata4.00: ATAPI: HL-DT-ST DVDRAM GH60N, UG01, max UDMA/100
[ 1.086119] ata4.00: configured for UDMA/100
[ 1.089832] ata1.00: ATA-8: WDC WD10EARS-22Y5B1, 80.00A80, max UDMA/133
[ 1.089836] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.091920] ata1.00: configured for UDMA/133
[ 1.092154] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-22Y 80.0 PQ: 0 ANSI: 5
[ 1.094275] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.094279] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.094345] sd 0:0:0:0: [sda] Write Protect is off
[ 1.094347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.094411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.094640] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH60N UG01 PQ: 0 ANSI: 5
[ 1.103496] sda: sda1 sda2 sda3
[ 1.104373] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.105127] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.105132] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.105275] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.106164] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.106329] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.147108] hub 2-0:1.0: over-current condition on port 3
[ 1.588677] tsc: Refined TSC clocksource calibration: 3099.999 MHz
[ 1.607664] hub 1-0:1.0: over-current condition on port 3
[ 2.587909] Switched to clocksource tsc
[ 6.533619] bio: create slab <bio-1> at 1
[ 6.746443] bio: create slab <bio-1> at 1
[ 7.745636] PM: Starting manual resume from disk
[ 7.839136] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[ 7.858696] EXT4-fs (dm-5): mounted filesystem with journalled data mode. Opts: (null)
[ 9.036545] systemd-udevd[490]: starting version 204
[ 10.003701] wmi: Mapper loaded
[ 10.015287] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 10.015413] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 10.015461] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input1
[ 10.017967] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 10.017973] ACPI: Power Button [PWRB]
[ 10.018387] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 10.018678] ACPI: Power Button [PWRF]
[ 10.082945] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 10.082950] ACPI Warning: 0x0000000000004e00-0x0000000000004e3f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20130517/utaddress-251)
[ 10.082955] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.138878] [drm] Initialized drm 1.1.0 20060810
[ 10.147881] acpi-cpufreq: overriding BIOS provided _PSD data
[ 10.211094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.220033] ohci-pci: OHCI PCI platform driver
[ 10.220509] ohci-pci 0000:00:02.0: setting latency timer to 64
[ 10.220519] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 10.220536] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 10.220598] ohci-pci 0000:00:02.0: irq 23, io mem 0xfce7f000
[ 10.273263] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.273276] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.273284] usb usb3: Product: OHCI PCI host controller
[ 10.273291] usb usb3: Manufacturer: Linux 3.11-1.slh.1-aptosid-amd64 ohci_hcd
[ 10.273297] usb usb3: SerialNumber: 0000:00:02.0
[ 10.273744] hub 3-0:1.0: USB hub found
[ 10.273759] hub 3-0:1.0: 6 ports detected
[ 10.274859] ohci-pci 0000:00:04.0: setting latency timer to 64
[ 10.274867] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 10.274884] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 10.274944] ohci-pci 0000:00:04.0: irq 21, io mem 0xfce7d000
[ 10.327183] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.327197] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.327205] usb usb4: Product: OHCI PCI host controller
[ 10.327212] usb usb4: Manufacturer: Linux 3.11-1.slh.1-aptosid-amd64 ohci_hcd
[ 10.327217] usb usb4: SerialNumber: 0000:00:04.0
[ 10.327651] hub 4-0:1.0: USB hub found
[ 10.327666] hub 4-0:1.0: 6 ports detected
[ 10.413277] MCE: In-kernel MCE decoding enabled.
[ 10.429477] EDAC MC: Ver: 3.0.0
[ 10.432308] AMD64 EDAC driver v3.4.0
[ 10.432419] EDAC amd64: DRAM ECC disabled.
[ 10.432473] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.432473] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.432473] (Note that use of the override may cause unknown side effects.)
[ 10.457874] kvm: Nested Virtualization enabled
[ 10.457888] kvm: Nested Paging enabled
[ 10.684832] usb 4-2: new low-speed USB device number 2 using ohci-pci
[ 10.782996] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 10.783009] hda_intel: Disabling MSI
[ 10.783072] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 10.829941] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 10.830072] ACPI Warning: \_SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 10.830178] nouveau 0000:02:00.0: setting latency timer to 64
[ 10.830734] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[ 10.831564] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0aa580a2
[ 10.831575] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP77/MCP78 (NVAA)
[ 10.831582] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 10.834021] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 10.884419] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 10.884426] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 10.884998] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 10.885008] nouveau [ VBIOS][0000:02:00.0] version 62.77.36.00.03
[ 10.894623] usb 4-2: New USB device found, idVendor=045e, idProduct=00db
[ 10.894627] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.894629] usb 4-2: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
[ 10.894631] usb 4-2: Manufacturer: Microsoft
[ 10.905413] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
[ 10.905422] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
[ 10.905428] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
[ 11.054472] usb 4-4: new low-speed USB device number 3 using ohci-pci
[ 11.151401] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.244315] usb 4-4: New USB device found, idVendor=093a, idProduct=2510
[ 11.244329] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.244337] usb 4-4: Product: USB OPTICAL MOUSE
[ 11.244344] usb 4-4: Manufacturer: PIXART
[ 11.296438] usbcore: registered new interface driver usbhid
[ 11.296447] usbhid: USB HID core driver
[ 11.438414] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external
[ 11.438439] nouveau [ PTHERM][0000:02:00.0] fan management: disabled
[ 11.438447] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
[ 11.438814] [TTM] Zone kernel: Available graphics memory: 2930564 kiB
[ 11.438822] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 11.438827] [TTM] Initializing pool allocator
[ 11.438841] [TTM] Initializing DMA pool allocator
[ 11.438866] nouveau [ DRM] VRAM: 256 MiB
[ 11.438872] nouveau [ DRM] GART: 1048576 MiB
[ 11.438884] nouveau [ DRM] TMDS table version 2.0
[ 11.438890] nouveau [ DRM] DCB version 4.0
[ 11.438898] nouveau [ DRM] DCB outp 00: 01000300 0000001e
[ 11.438906] nouveau [ DRM] DCB outp 01: 01011332 00020010
[ 11.438912] nouveau [ DRM] DCB conn 00: 00000100
[ 11.438919] nouveau [ DRM] DCB conn 01: 00001261
[ 11.455061] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.455066] [drm] No driver support for vblank timestamp query.
[ 11.479061] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00020002 FAULT at 0x100224
[ 11.503021] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10022c
[ 11.526982] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100234
[ 11.550943] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10023c
[ 11.572695] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input4
[ 11.572937] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:04.0-2/input0
[ 11.574906] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100228
[ 11.575372] input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1/input/input5
[ 11.575586] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:04.0-2/input1
[ 11.586885] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002c0
[ 11.593333] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input6
[ 11.593726] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:04.0-4/input0
[ 11.598886] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002c4
[ 11.610878] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e0
[ 11.622899] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e4
[ 11.622908] nouveau [ DRM] 1 available performance level(s)
[ 11.622922] nouveau [ DRM] 0: core 500MHz shader 1200MHz voltage 1100mV fanspeed 100%
[ 11.622929] nouveau [ DRM] c:
[ 11.652827] nouveau [ DRM] MM: using M2MF for buffer copies
[ 11.684445] nouveau [ DRM] allocated 1440x900 fb: 0x50000, bo ffff8801950f8000
[ 11.684670] fbcon: nouveaufb (fb0) is primary device
[ 11.765516] Console: switching to colour frame buffer device 180x56
[ 11.767827] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 11.767830] nouveau 0000:02:00.0: registered panic notifier
[ 11.767835] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0
[ 12.108648] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
[ 12.109001] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[ 12.109322] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[ 12.109664] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[ 12.110035] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[ 12.110392] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[ 12.110704] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[ 12.111020] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[ 13.239688] Adding 10485756k swap on /dev/mapper/swag-swap. Priority:-1 extents:1 across:10485756k FS
[ 13.305766] EXT4-fs (dm-5): re-mounted. Opts: (null)
[ 14.338404] EXT4-fs (dm-5): re-mounted. Opts: errors=remount-ro
[ 15.172771] fuse init (API version 7.22)
[ 17.056160] EXT4-fs (sda2): mounted filesystem with journalled data mode. Opts: errors=remount-ro
[ 17.121627] EXT4-fs (dm-2): mounted filesystem with journalled data mode. Opts: errors=remount-ro
[ 17.185353] EXT4-fs (dm-3): mounted filesystem with journalled data mode. Opts: errors=remount-ro
[ 17.248793] EXT4-fs (dm-4): mounted filesystem with journalled data mode. Opts: errors=remount-ro
[ 17.411934] EXT4-fs (dm-6): mounted filesystem with journalled data mode. Opts: errors=remount-ro
[ 20.188378] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 20.188518] forcedeth 0000:00:0a.0 eth0: MSI enabled
[ 20.230562] NET: Registered protocol family 17
[ 21.814715] vboxdrv: Found 4 processor cores.
[ 21.815095] vboxdrv: fAsync=0 offMin=0xa3f offMax=0x3e2a
[ 21.815243] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.815249] vboxdrv: Successfully loaded version 4.2.16_Debian (interface 0x001a0005).
[ 22.063664] vboxpci: IOMMU not found (not registered)
[ 25.298634] lp: driver loaded but no devices found
[ 25.358356] ppdev: user-space parallel port driver
[ 28.190676] Bluetooth: Core ver 2.16
[ 28.190703] NET: Registered protocol family 31
[ 28.190705] Bluetooth: HCI device and connection manager initialized
[ 28.190717] Bluetooth: HCI socket layer initialized
[ 28.190720] Bluetooth: L2CAP socket layer initialized
[ 28.190726] Bluetooth: SCO socket layer initialized
[ 28.223440] Bluetooth: RFCOMM TTY layer initialized
[ 28.223470] Bluetooth: RFCOMM socket layer initialized
[ 28.223476] Bluetooth: RFCOMM ver 1.11
[ 28.339032] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.339041] Bluetooth: BNEP filters: protocol multicast
[ 28.339059] Bluetooth: BNEP socket layer initialized
[ 57.865108] tun: Universal TUN/TAP device driver, 1.6
[ 57.865117] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>