Board: STx7105-PDK [32-bit mode]
U-Boot 1.3.1 (Nov 10 2010 - 10:23:47) - stm23_0045
DRAM: 256 MiB
SPI: ST M25P80 (1MiB) device (page=256,erase=4096)
In: serial
Out: serial
Err: serial
Svn Version: 5804
[uboot_gb620]:update flag = 1
[uboot_gb620]:P/N flag = 2
[uboot_gb620]:NTSC...
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot: 0
....
.....................................................................................................................................................................................................................
2231572 bytes read
Booting image at 80000000 ...
Image Name: Linux 2.6.23.17_stm23_0123
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2231508 Bytes = 2.1 MiB
Load Address: 80800000
Entry Point: 80801000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
CMDLen=169
There is "hwaddr" keywords! Position=95
Read MacAddr=24cf21b10495
[iptv_kernel]:Starting kernel console=ttyAS0,115200 root=8:2 rootfstype=ext3 rw rootflags=data=journal nwhwconf=device:eth0,hwaddr:24:cf:21:b1:04:95 phyaddr:0,watchdog:5000 mem=120M bigphysarea=2048 - 0x00000000 - 0 ...
Linux version 2.6.23.17_stm23_0123 (Judith@Judith) (gcc version 4.3.4 20091123 (STMicroelectronics/Linux Base) ) #13 PREEMPT Fri Jul 29 16:10:39 CST 2011
Booting machvec: pdk7105
Node 0: start_pfn = 0x40000, low = 0x47800
Zone PFN ranges:
Normal 262144 -> 292864
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 262144 -> 292864
STMicroelectronics PDK7105-SDK board initialisation
STx7105 version 3.x
bpa2: partition 'bigphysarea' created at 0x48000000, size 32768 kB (0x02000000 B)
bpa2: bigphysarea ('bigphysarea') not in logical memory
bpa2: partition 'LMI_IO' created at 0x4a000000, size 98304 kB (0x06000000 B)
Built 1 zonelists in Zone order. Total pages: 30480
Kernel command line: console=ttyAS0,115200 root=8:2 rootfstype=ext3 rw rootflags=data=journal nwhwconf=device:eth0,hwaddr:24:cf:21:b1:04:95 phyaddr:0,watchdog:5000 mem=120M bigphysarea=2048
bpa2: partition 'bigphysarea' created at 0x40d04000, size 8192 kB (0x00800000 B)
PID hash table entries: 512 (order: 9, 2048 bytes)
Using tmu for system timer
Using 25.000 MHz high precision timer.
console [ttyAS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 101248k/122880k available (3120k kernel code, 804k data, 116k init)
PVR=04909200 CVR=60880000 PRR=00009e20
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Mount-cache hash table entries: 512
CPU: STx7105
NET: Registered protocol family 16
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
Time: SuperH clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/O].
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.8)
JFS: nTxBlock = 791, nTxLock = 6329
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
STMicroelectronics ASC driver initialized
stasc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stasc
loop: module loaded
platform registration... <7>done!
GMAC - user ID: 0x10, Synopsys ID: 0x33
PARSE CMDLINE: 00:00:00:00:00:00
ETHADDR: 00:00:00:00:00:00
no valid MAC address; please, set using ifconfig or nwhwconfig!
eth0 - (dev. name: stmmaceth - id: 0, IRQ #134
IO base addr: 0xfd110000)
STMMAC MII Bus: probed
eth0: PHY ID 01018f2d at 17 IRQ -1 (0:11) active
Micrel KSZ8041: Registered new driver
nwhw_config: (eth0) setting mac address: 24:cf:21:b1:04:95
Linux video capture interface: v2.00
scsi0 : sata_stm
ata1: SATA max UDMA/133 cmd 0xfe209000 ctl 0xfe209820 bmdma 0x00000000 irq 72
ata1: SATA link down (SStatus 0 SControl 300)
physmap platform flash device: 08000000 at 00000000
physmap-flash physmap-flash: map_probe failed
stm-ehci stm-ehci.0: st-ehci
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: stm-ohci
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
stm-ehci stm-ehci.1: st-ehci
stm-ehci stm-ehci.1: new USB bus registered, assigned bus number 3
stm-ehci stm-ehci.1: irq 143, io mem 0xfeaffe00
usb 1-1: new high speed USB device using stm-ehci and address 2
stm-ehci stm-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
stm-ohci stm-ohci.1: stm-ohci
stm-ohci stm-ohci.1: new USB bus registered, assigned bus number 4
stm-ohci stm-ohci.1: irq 142, io mem 0xfeaffc00
usb 1-1: configuration #1 chosen from 1 choice
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
DMA: Registering fdma_dmac.0 handler (16 channels).
platform fdma_dmac.0: SLIM hw 0.0, FDMA fw 6.1
DMA: Registering fdma_dmac.1 handler (16 channels).
platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 6.1
STMicroelectronics - Coprocessors st231 Init
st-coprocessor-0: No RAM reserved
st231.0 Coprocessor -------------------------------------------
not configured!
---------------------------------------------------------------
st-coprocessor-1: No RAM reserved
st231.1 Coprocessor -------------------------------------------
not configured!
---------------------------------------------------------------
stm_rng hardware driver 1.0 configured
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ALSA device list:
#0: STMicroelectronics STx7105 cut 3 SOC audio subsystem
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Waiting 10sec before mounting root device...
scsi 1:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
sd 1:0:0:0: [sda] 15679488 512-byte hardware sectors (8028 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] 15679488 512-byte hardware sectors (8028 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI removable disk
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with journal data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 116k freed
INIT: version 2.86 booting
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Starting DEBUG Interface
Mounting local filesystems...
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Cleaning /tmp.
Hostname: atevio7500.
Model: atevio7500
vBoxType: 7
Selected Model: Fortis HDBOX frontpanel control utility
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
, WAKEUPDECREMENT 300
setMode: : Inappropriate ioctl for device
setbrightness: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
setled: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
setled: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
setled: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
setled: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
setled: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
setled: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
stmcore-display: using HDMI hotplug
stmcore-display: STi7105 display: probed
device probe found 2 display pipelines
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
requesting frm: 'component.fw', c1177428/871cbdac
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
frm 'component.fw' successfully loaded
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 12145 field duration = 0
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
stmfb: fb0 parameters = "1280x720-32@50:15m:pal:yuv:yuv"
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
setMode: : Inappropriate ioctl for device
seticon: : Inappropriate ioctl for device
wakeup File not found
starting telnetd
init stmfb
stmfb: fb1 parameters = "<NULL>"
LOADING MODULES
Model: atevio7500
vBoxType: 7
Selected Model: Fortis HDBOX frontpanel control utility
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
, WAKEUPDECREMENT 300
wakeup File not found
load a firmware
cannot open /dev/st231-1 device (errno = 28)
load v firmware
cannot open /dev/st231-0 device (errno = 28)
init embx
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pc = 8082e228
*pde = 00000000
Oops: 0001 [#1]
Modules linked in: autofs4 nuvoton e2_proc embxshell stmcore_display_sti7105 stmfb
Pid : 385, Comm: insmod
PC is at add_wait_queue+0x28/0x80
PC : 8082e228 SP : 8720de8c SR : 400080f1 TEA : c1288ad8 Not tainted
R0 : 00000000 R1 : 00000000 R2 : 8720de9c R3 : 40008001
R4 : c10fbed0 R5 : 8720de90 R6 : c10fbd60 R7 : ffffffff
R8 : 8720c000 R9 : 8720c000 R10 : c10fbec8 R11 : 8720c000
R12 : 8179edc0 R13 : 8720c008 R14 : 00000002
MACH: 00000000 MACL: 00000000 GBR : 296b9450 PR : 80b065a0
Call trace:
[<80813400>] default_wake_function+0x0/0x20
[<c10f778e>] EMBX_Init+0x12e/0x160 [embxshell]
[<808276c0>] blocking_notifier_call_chain+0x0/0x20
[<80b07ac0>] mutex_unlock+0x0/0x60
[<c10e800c>] init_module+0xc/0x60 [embxshell]
[<8083b396>] sys_init_module+0xf6/0x1940
[<8085c120>] __kmalloc+0x0/0xc0
[<808078f8>] syscall_call+0xa/0xe
[<8083b2a0>] sys_init_module+0x0/0x1940
Process: insmod (pid: 385, stack limit = 8720c001)
Stack: (0x8720de8c to 0x8720e000)
de80: c10fbed0 00000000 8179edc0 80813400 00000000
dea0: 8725a20c c10f778e 8720dec4 c10fbd60 808276c0 80b07ac0 c10f2ae8 c10fbec0
dec0: c10fbd60 c10e800c 8720ded8 c10f2ae8 ffffff0f c10fbd60 8083b396 00000018
dee0: c10fbd60 00000000 c10f2730 c10f2730 8720c008 8720c000 c10fbe5c c10ed030
df00: c10fbd6c 00000000 00000000 00000000 00000000 00000000 00000000 00000000
df20: 00000000 00000000 0000000b 00000000 0000000c 00000000 00000000 c10f31b8
df40: 872ffb20 c10f2645 c10f2728 c10ed000 c10f2a98 8085c120 0000006d 0000006d
df60: c10fbda8 c10f2750 c10f2ac0 c10f2ae8 00000016 c10f2aec c128a180 00000000
df80: 808078f8 00000000 000001d4 00000514 00000000 00000021 0000005c 8083b2a0
dfa0: 004118d0 00000120 00404fa4 00000080 00496018 00007c14 00496008 00007c14
dfc0: 00496018 00496008 296b9460 7befed50 7befee84 000001d4 00000000 7befed8c
dfe0: 29651ef2 00412712 00008000 296b9450 4a8568ad ffff9000 0000005c 00000160
note: insmod[385] exited with preempt_count 1
Segmentation fault
embxmailbox: Unknown symbol EMBX_OS_MemFree
embxmailbox: Unknown symbol EMBX_OS_EventWaitTimeout
embxmailbox: Unknown symbol EMBX_OS_EventCreate
embxmailbox: Unknown symbol EMBX_OS_MemAlloc
embxmailbox: Unknown symbol EMBX_OS_EventSignal
insmod: can't insert '/lib/modules/embxmailbox.ko': unknown symbol in module, or unknown parameter
embxshm: Unknown symbol EMBX_OS_MemFree
embxshm: Unknown symbol EMBX_EventListAdd
embxshm: Unknown symbol EMBX_Mailbox_InterruptEnable
embxshm: Unknown symbol EMBX_OS_EventWaitTimeout
embxshm: Unknown symbol EMBX_OS_ThreadDelete
embxshm: Unknown symbol EMBX_Mailbox_StatusGet
embxshm: Unknown symbol EMBX_Mailbox_Alloc
embxshm: Unknown symbol EMBX_OS_EventCreate
embxshm: Unknown symbol EMBX_Mailbox_StatusSet
embxshm: Unknown symbol EMBX_OS_PhysMemMap
embxshm: Unknown symbol _EMBX_DriverMutexTake
embxshm: Unknown symbol EMBX_OS_ContigMemAlloc
embxshm: Unknown symbol EMBX_RegisterTransport
embxshm: Unknown symbol EMBX_UnregisterTransport
embxshm: Unknown symbol EMBX_OS_MemAlloc
embxshm: Unknown symbol EMBX_Mailbox_UpdateInterruptHandler
embxshm: Unknown symbol EMBX_OS_EventSignal
embxshm: Unknown symbol EMBX_EventListFront
embxshm: Unknown symbol EMBX_Mailbox_InterruptDisable
embxshm: Unknown symbol EMBX_GetTuneable
embxshm: Unknown symbol EMBX_OS_VirtToPhys
embxshm: Unknown symbol _embx_handle_manager
embxshm: Unknown symbol EMBX_Mailbox_Free
embxshm: Unknown symbol EMBX_Mailbox_InterruptClear
embxshm: Unknown symbol EMBX_OS_PhysMemUnMap
embxshm: Unknown symbol EMBX_OS_ThreadCreate
embxshm: Unknown symbol EMBX_OS_ContigMemFree
embxshm: Unknown symbol EMBX_Mailbox_Synchronize
embxshm: Unknown symbol _EMBX_DriverMutexRelease
embxshm: Unknown symbol EMBX_EventListRemove
embxshm: Unknown symbol EMBX_Mailbox_InterruptRaise
insmod: can't insert '/lib/modules/embxshm.ko': unknown symbol in module, or unknown parameter
mme_host: Unknown symbol EMBX_OS_MemFree
mme_host: Unknown symbol EMBX_OS_EventWaitTimeout
mme_host: Unknown symbol EMBX_ClosePort
mme_host: Unknown symbol EMBX_Address
mme_host: Unknown symbol EMBX_OS_ThreadDelete
mme_host: Unknown symbol EMBX_GetTransportInfo
mme_host: Unknown symbol EMBX_OS_EventCreate
mme_host: Unknown symbol EMBX_SendMessage
mme_host: Unknown symbol EMBX_Offset
mme_host: Unknown symbol EMBX_RegisterObject
mme_host: Unknown symbol EMBX_ConnectBlock
mme_host: Unknown symbol EMBX_DeregisterObject
mme_host: Unknown symbol EMBX_ReceiveBlock
mme_host: Unknown symbol EMBX_UpdateObject
mme_host: Unknown symbol EMBX_GetBufferSize
mme_host: Unknown symbol EMBX_Release
mme_host: Unknown symbol EMBX_OS_MemAlloc
mme_host: Unknown symbol EMBX_Alloc
mme_host: Unknown symbol EMBX_OS_EventSignal
mme_host: Unknown symbol EMBX_CreatePort
mme_host: Unknown symbol EMBX_InvalidatePort
mme_host: Unknown symbol EMBX_OpenTransport
mme_host: Unknown symbol EMBX_OS_VirtToPhys
mme_host: Unknown symbol EMBX_Free
mme_host: Unknown symbol EMBX_ReceiveBlockTimeout
mme_host: Unknown symbol EMBX_OS_ThreadCreate
mme_host: Unknown symbol EMBX_CloseTransport
mme_host: Unknown symbol EMBX_Connect
insmod: can't insert '/lib/modules/mme_host.ko': unknown symbol in module, or unknown parameter
init AVS
i2c-stm: arbitration error
HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16683 field duration = 0
HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16683 field duration = 0
i2c-stm: arbitration error
i2c-stm: arbitration error
init player 191
mmelog: Unknown symbol MME_GetTransformerCapability
mmelog: Unknown symbol MME_SendCommand
mmelog: Unknown symbol MME_AbortCommand
mmelog: Unknown symbol MME_TermTransformer
mmelog: Unknown symbol MME_InitTransformer
insmod: can't insert '/lib/modules/mmelog.ko': unknown symbol in module, or unknown parameter
p2div64: Unknown symbol tiny_panic
insmod: can't insert '/lib/modules/p2div64.ko': unknown symbol in module, or unknown parameter
pti: Unknown parameter `waitMS'
insmod: can't insert '/lib/modules/pti.ko': unknown symbol in module, or unknown parameter
stm_monitor: Unknown symbol MME_GetTransformerCapability
stm_monitor: Unknown symbol MME_SendCommand
stm_monitor: Unknown symbol __udivdi3
stm_monitor: Unknown symbol MME_TermTransformer
HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 18723 field duration = 0
stm_monitor: Unknown symbol MME_InitTransformer
insmod: can't insert '/lib/modules/stm_monitor.ko': unknown symbol in module, or unknown parameter
stmdvb: Unknown symbol __divdi3
stmdvb: Unknown symbol pti_hal_slot_clear_pid
stmdvb: Unknown symbol MME_GetTransformerCapability
stmdvb: Unknown symbol pti_hal_slot_link_buffer
stmdvb: Unknown symbol stmfb_set_var_ex
stmdvb: Unknown symbol pti_hal_get_new_descrambler
stmdvb: Unknown symbol paceSwtsByPti
stmdvb: Unknown symbol pti_hal_descrambler_link
stmdvb: Unknown symbol MME_SendCommand
stmdvb: Unknown symbol __udivdi3
stmdvb: Unknown symbol MME_AbortCommand
stmdvb: Unknown symbol stmfb_set_output_configuration
stmdvb: Unknown symbol pti_hal_descrambler_set
stmdvb: Unknown symbol stmhdmiio_get_audio_source
stmdvb: Unknown symbol pti_hal_slot_free
stmdvb: Unknown symbol stmhdmiio_set_audio_source
stmdvb: Unknown symbol pti_hal_set_source
stmdvb: Unknown symbol pti_hal_get_new_session_handle
stmdvb: Unknown symbol MonitorSignalEvent
stmdvb: Unknown symbol pti_hal_init
stmdvb: Unknown symbol pti_hal_slot_set_pid
stmdvb: Unknown symbol stmfb_get_fbinfo_ptr
stmdvb: Unknown symbol pti_hal_slot_unlink_buffer
stmdvb: Unknown symbol pti_hal_get_new_slot_handle
stmdvb: Unknown symbol stmhdmiio_set_edid_handling
stmdvb: Unknown symbol stmfb_get_output_configuration
stmdvb: Unknown symbol MME_TermTransformer
stmdvb: Unknown symbol stmhdmiio_get_edid_handling
stmdvb: Unknown symbol MME_InitTransformer
insmod: can't insert '/lib/modules/stmdvb.ko': unknown symbol in module, or unknown parameter
player2: Unknown symbol __divdi3
player2: Unknown symbol register_dvb_backend
player2: Unknown symbol MME_GetTransformerCapability
player2: Unknown symbol MME_SendCommand
player2: Unknown symbol __udivdi3
player2: Unknown symbol MME_AbortCommand
player2: Unknown symbol ManifestorLastDisplayedBuffer
player2: Unknown symbol g_ManifestorLastWaitQueue
player2: Unknown symbol MonitorSignalEvent
player2: Unknown symbol MME_TermTransformer
player2: Unknown symbol MME_InitTransformer
insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
sth264pp: Unknown symbol OSDEV_DeviceList
sth264pp: Unknown symbol OSDEV_DeviceDescriptors
insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
stmalloc: Unknown symbol OSDEV_DeviceList
stmalloc: Unknown symbol OSDEV_DeviceDescriptors
insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
silencegen: Unknown symbol MME_DeregisterTransformer
silencegen: Unknown symbol MME_RegisterTransformer
insmod: can't insert '/lib/modules/silencegen.ko': unknown symbol in module, or unknown parameter
init frontpanel
input: TDT RC event driver as /class/input/input0
Model: atevio7500
vBoxType: 7
Input device name: "TDT RC event driver"
Mounting local filesystems...
showSinglePic /boot/bootlogo.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
Selected Remote: Fortis HDBOX RemoteControl
RemoteControl Map:
MENU - 04 - 139
RED - 4B - 398
GREEN - 4A - 399
YELLOW - 49 - 400
BLUE - 48 - 401
EXIT - 1C - 102
TEXT - 0D - 388
EPG - 08 - 365
REWIND - 58 - 168
FASTFORWARD - 5C - 208
PLAY - 55 - 207
PAUSE - 07 - 119
RECORD - 56 - 167
STOP - 54 - 128
STANDBY - 0A - 116
MUTE - 0C - 113
CHANNELUP - 5E - 104
CHANNELDOWN - 5F - 109
VOLUMEUP - 4E - 115
VOLUMEDOWN - 4F - 114
INFO - 06 - 138
OK - 1F - 352
UP - 00 - 103
RIGHT - 02 - 106
DOWN - 01 - 108
LEFT - 03 - 105
RECALL - 09 - 396
ZOOM - 0B - 372
VFORMAT - 0E - 371
RESOLUTION - 0F - 375
TVRADIO - 1A - 373
SLEEP - 1E - 409
OPEN - 40 - 394
FAV - 41 - 364
CHECK - 42 - 353
UPUP - 43 - 414
DOWNDOWN - 44 - 415
NEXT - 4C - 407
LAST - 50 - 412
PIP - 51 - 357
SWAP - 52 - 354
LIST - 53 - 370
0BUTTON - 10 - 11
1BUTTON - 11 - 2
2BUTTON - 12 - 3
3BUTTON - 13 - 4
4BUTTON - 14 - 5
5BUTTON - 15 - 6
6BUTTON - 16 - 7
7BUTTON - 17 - 8
8BUTTON - 18 - 9
9BUTTON - 19 - 10
Frontpanel Map:
STANDBY - 00 - 116
OK - 06 - 352
MENU - 05 - 139
VOLUMEUP - 04 - 115
VOLUMEDOWN - 03 - 114
CHANNELUP - 01 - 104
CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN
Hostname: atevio7500.
starting telnetd
Starting FTP server: vsftpd.
HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16687 field duration = 0
Deconfiguring network interfaces... done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
LOADING e2
starting e2->
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) gLCDDC
couldn't open LCD - load lcd.o!
+ (9) GFBDC
15360k video mem
HandleVSYNCInterrupt: - time discontinuity detected, vsync interval = 16673 field duration = 0
13740kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5120)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI