[ 0.000000] Linux version 2.6.27.7 (root@darkstar) (gcc version 4.2.4) #3 PREEMPT Mon Jul 29 19:23:46 EST 2013
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000002010000 (usable)
[ 0.000000] BIOS-e820: 0000000002010000 - 0000000002020000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000002020000 - 0000000002040000 (reserved)
[ 0.000000] BIOS-e820: 00000000fef80000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffe0000 - 00000000fffe6e00 (reserved)
[ 0.000000] BIOS-e820: 00000000fffe6e00 - 00000000fffe7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x2010 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 2010000 @ 7000-d000
[ 0.000000] ACPI: RSDP 000FA380, 0014 (r0 TOSHIB)
[ 0.000000] ACPI: RSDT 02010000, 0028 (r1 TOSHIB 750 19980710 TASM 4010000)
[ 0.000000] ACPI: FACP 02010054, 0074 (r1 TOSHIB 750 19980710 TASM 4010000)
[ 0.000000] ACPI: DSDT 020100C8, 5230 (r1 TOSHIB 2520CD 19990310 MSFT 100000A)
[ 0.000000] ACPI: FACS FFFE6E00, 0040
[ 0.000000] 32MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 02010000
[ 0.000000] low ram: 00000000 - 02010000
[ 0.000000] bootmap 00001000 - 00001404
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0002010000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0001000000 - 00013c38e8] TEXT DATA BSS ==> [0001000000 - 00013c38e8]
[ 0.000000] #2 [00013c4000 - 00013ca000] INIT_PG_TABLE ==> [00013c4000 - 00013ca000]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #5 [0000001000 - 0000002000] BOOTMAP ==> [0000001000 - 0000002000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00002010
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00002010
[ 0.000000] On node 0 totalpages: 8111
[ 0.000000] free_area_init_node: node 0, pgdat c1322500, node_mem_map c13ca000
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 4079 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x18a8
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] mapped APIC to ffffb000 (01413000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 2040000:fcf40000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8046
[ 0.000000] Kernel command line: root=/dev/sda1 ro vga=0x303 resume=/dev/sda3 no_console_suspend
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] CPU 0 irqstacks, hard=c136b000 soft=c136a000
[ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 333.264 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000999] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000999] Memory: 28208k/32832k available (2531k kernel code, 4232k reserved, 698k data, 248k init, 0k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
[ 0.000999] vmalloc : 0xc3000000 - 0xfffb7000 ( 975 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xc2010000 ( 32 MB)
[ 0.000999] .init : 0xc1329000 - 0xc1367000 ( 248 kB)
[ 0.000999] .data : 0xc1278f81 - 0xc13277b0 ( 698 kB)
[ 0.000999] .text : 0xc1000000 - 0xc1278f81 (2531 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.000999] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.001186] Calibrating delay loop (skipped), value calculated using timer frequency.. 666.52 BogoMIPS (lpj=333264)
[ 0.003312] Mount-cache hash table entries: 512
[ 0.011247] CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
[ 0.012439] CPU: AMD-K6(tm) 3D processor stepping 0c
[ 0.013183] Checking 'hlt' instruction... OK.
[ 0.017612] Freeing SMP alternatives: 0k freed
[ 0.018100] ACPI: Core revision 20080609
[ 0.122266] ACPI: setting ELCR to 2000 (from 0804)
[ 0.129565] net_namespace: 312 bytes
[ 0.131659] NET: Registered protocol family 16
[ 0.137574] No dock devices found.
[ 0.140777] ACPI: bus type pci registered
[ 0.148220] PCI: PCI BIOS revision 2.10 entry at 0xfd82b, last bus=21
[ 0.148617] PCI: Using configuration type 1 for base access
[ 0.199145] ACPI: EC: Look up EC in DSDT
[ 0.265774] ACPI: Interpreter enabled
[ 0.266003] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.266642] ACPI: Using PIC for interrupt routing
[ 0.391620] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.393708] PCI: 0000:00:08.0 reg 10 32bit mmio: [f8000000, fbffffff]
[ 0.393888] PCI: 0000:00:08.0 reg 30 32bit mmio: [c0000, cffff]
[ 0.394130] PCI: 0000:00:0b.0 reg 10 32bit mmio: [f7fff000, f7ffffff]
[ 0.394537] PCI: 0000:00:10.0 reg 20 io port: [1800, 180f]
[ 0.394774] PCI: 0000:00:11.0 reg 10 io port: [ffe0, ffff]
[ 0.395194] PCI: 0000:00:13.0 reg 10 32bit mmio: [0, fff]
[ 0.395394] PCI: 0000:00:13.1 reg 10 32bit mmio: [0, fff]
[ 0.395815] bus 00 -> node 0
[ 0.396007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.425218] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.436277] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.447125] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.457833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.471484] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0, disabled.
[ 0.481540] ACPI: Power Resource [PFAN] (off)
[ 0.482638] ACPI: Power Resource [PWH1] (on)
[ 0.485202] ACPI: Power Resource [PWH2] (on)
[ 0.486725] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.488083] pnp: PnP ACPI init
[ 0.488465] ACPI: bus type pnp registered
[ 0.489693] pnp 00:00: parse allocated resources
[ 0.496840] pnp 00:00: add mem 0x0-0x9ffff flags 0x1
[ 0.496988] pnp 00:00: add mem 0xf0000-0xfffff flags 0x0
[ 0.497080] pnp 00:00: add mem 0x100000-0x200ffff flags 0x1
[ 0.497170] pnp 00:00: add mem 0x2010000-0x203ffff flags 0x0
[ 0.497262] pnp 00:00: add mem 0xfff00000-0xffffffff flags 0x0
[ 0.497356] pnp 00:00: add mem 0xfef80000-0xfeffffff flags 0x0
[ 0.497453] pnp 00:00: PNP0c01: calling <7>pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.499304] pnp 00:01: parse allocated resources
[ 0.499562] pnp 00:01: add io 0xcf8-0xcff flags 0x1
[ 0.501010] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.511554] pnp 00:02: parse allocated resources
[ 0.511753] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.511834] pnp 00:02: add io 0x81-0x83 flags 0x1
[ 0.511987] pnp 00:02: add io 0x87-0x87 flags 0x1
[ 0.512079] pnp 00:02: add io 0x89-0x8b flags 0x1
[ 0.512162] pnp 00:02: add io 0x8f-0x8f flags 0x1
[ 0.512309] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.512392] pnp 00:02: add dma 4 flags 0x0
[ 0.513720] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.514123] pnp 00:03: parse allocated resources
[ 0.514266] pnp 00:03: add io 0x61-0x61 flags 0x1
[ 0.515529] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.515767] pnp 00:04: parse allocated resources
[ 0.516002] pnp 00:04: add io 0xf0-0xff flags 0x1
[ 0.516091] PCI: setting IRQ 13 as level-triggered
[ 0.516170] pnp 00:04: add irq 13 flags 0x18
[ 0.517450] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.517690] pnp 00:05: parse allocated resources
[ 0.517847] pnp 00:05: add io 0x60-0x60 flags 0x1
[ 0.517982] pnp 00:05: add io 0x64-0x64 flags 0x1
[ 0.518066] pnp 00:05: add irq 1 flags 0x1
[ 0.519424] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.521584] pnp 00:06: parse allocated resources
[ 0.528689] pnp 00:06: add irq 12 flags 0x11
[ 0.528771] pnp 00:06: parse resource options
[ 0.535891] pnp 00:06: independent irq 12 flags 0x11
[ 0.537320] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.537561] pnp 00:07: parse allocated resources
[ 0.537711] pnp 00:07: add io 0x70-0x71 flags 0x1
[ 0.537795] pnp 00:07: add irq 8 flags 0x1
[ 0.539191] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.541460] pnp 00:08: parse allocated resources
[ 0.541751] pnp 00:08: add io 0x80-0x80 flags 0x1
[ 0.541833] pnp 00:08: add io 0x84-0x86 flags 0x1
[ 0.541984] pnp 00:08: add io 0x88-0x88 flags 0x1
[ 0.542068] pnp 00:08: add io 0x8c-0x8e flags 0x1
[ 0.542149] pnp 00:08: add io 0xe0-0xef flags 0x1
[ 0.542230] pnp 00:08: add io 0xb0-0xbf flags 0x1
[ 0.542312] pnp 00:08: add io 0x24-0x25 flags 0x1
[ 0.542393] pnp 00:08: add io 0x2e-0x2f flags 0x1
[ 0.542474] pnp 00:08: add io 0x62-0x62 flags 0x1
[ 0.542556] pnp 00:08: add io 0x66-0x66 flags 0x1
[ 0.542637] pnp 00:08: add io 0x68-0x6f flags 0x1
[ 0.542719] pnp 00:08: add io 0x377-0x377 flags 0x1
[ 0.542803] pnp 00:08: add io 0x1882-0x1885 flags 0x1
[ 0.542888] pnp 00:08: add io 0x1888-0x188d flags 0x1
[ 0.542978] pnp 00:08: add io 0x18a0-0x18cf flags 0x1
[ 0.543064] pnp 00:08: add io 0x480-0x48f flags 0x1
[ 0.543147] pnp 00:08: add io 0x4d0-0x4d1 flags 0x1
[ 0.543231] pnp 00:08: add io 0xfe90-0xfe97 flags 0x1
[ 0.543316] pnp 00:08: add io 0xfe9e-0xfe9e flags 0x1
[ 0.543402] pnp 00:08: PNP0c02: calling <7>pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.547315] pnp 00:09: parse allocated resources
[ 0.554420] pnp 00:09: add io 0x3f2-0x3f5 flags 0x1
[ 0.554517] pnp 00:09: add io 0x3f7-0x3f7 flags 0x1
[ 0.554602] pnp 00:09: add irq 6 flags 0x1
[ 0.554677] pnp 00:09: add dma 2 flags 0x0
[ 0.554744] pnp 00:09: parse resource options
[ 0.561868] pnp 00:09: independent io min 0x3f2 max 0x3f2 align 1 size 4 flags 0x1
[ 0.562008] pnp 00:09: independent io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.562135] pnp 00:09: independent irq 6 flags 0x1
[ 0.562232] pnp 00:09: independent dma 2 (bitmask 0x4) flags 0x0
[ 0.563707] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.565733] pnp 00:0a: parse allocated resources
[ 0.572814] pnp 00:0a: add io 0x3f8-0x3ff flags 0x1
[ 0.572910] pnp 00:0a: add irq 4 flags 0x11
[ 0.572973] pnp 00:0a: parse resource options
[ 0.580229] pnp 00:0a: dependent set 0 (acceptable) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.580380] pnp 00:0a: dependent set 1 (acceptable) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.580522] pnp 00:0a: dependent set 2 (acceptable) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.580664] pnp 00:0a: dependent set 3 (acceptable) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.580805] pnp 00:0a: dependent set 4 (acceptable) io min 0x2c8 max 0x2c8 align 1 size 8 flags 0x1
[ 0.581007] pnp 00:0a: dependent set 5 (acceptable) io min 0x3a8 max 0x3a8 align 1 size 8 flags 0x1
[ 0.581150] pnp 00:0a: dependent set 6 (acceptable) io min 0x2a8 max 0x2a8 align 1 size 8 flags 0x1
[ 0.581317] pnp 00:0a: independent irq 3 4 5 7 9 10 11 flags 0x11
[ 0.582818] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.586685] pnp 00:0b: parse allocated resources
[ 0.593711] pnp 00:0b: add io 0x378-0x37a flags 0x1
[ 0.593805] pnp 00:0b: add io 0x778-0x77a flags 0x1
[ 0.593890] pnp 00:0b: add irq 7 flags 0x11
[ 0.594012] pnp 00:0b: add dma 3 flags 0x0
[ 0.594080] pnp 00:0b: parse resource options
[ 0.601266] pnp 00:0b: dependent set 0 (acceptable) io min 0x378 max 0x378 align 1 size 3 flags 0x1
[ 0.601415] pnp 00:0b: dependent set 0 (acceptable) io min 0x778 max 0x778 align 1 size 3 flags 0x1
[ 0.601560] pnp 00:0b: dependent set 0 (acceptable) irq 7 flags 0x11
[ 0.601681] pnp 00:0b: dependent set 1 (acceptable) io min 0x278 max 0x278 align 1 size 3 flags 0x1
[ 0.601821] pnp 00:0b: dependent set 1 (acceptable) io min 0x678 max 0x678 align 1 size 3 flags 0x1
[ 0.602005] pnp 00:0b: dependent set 1 (acceptable) irq 5 flags 0x11
[ 0.602127] pnp 00:0b: dependent set 2 (acceptable) io min 0x3bc max 0x3bc align 1 size 3 flags 0x1
[ 0.602267] pnp 00:0b: dependent set 2 (acceptable) io min 0x7bc max 0x7bc align 1 size 3 flags 0x1
[ 0.602405] pnp 00:0b: dependent set 2 (acceptable) irq 7 flags 0x11
[ 0.602521] pnp 00:0b: independent dma 1 2 3 (bitmask 0xe) flags 0x0
[ 0.604164] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.609698] pnp 00:0c: parse allocated resources
[ 0.616846] pnp 00:0c: add io 0x220-0x22f flags 0x1
[ 0.616984] pnp 00:0c: add io 0x530-0x537 flags 0x1
[ 0.617070] pnp 00:0c: add io 0x388-0x38f flags 0x1
[ 0.617154] pnp 00:0c: add io 0x330-0x331 flags 0x1
[ 0.617238] pnp 00:0c: add io 0x370-0x371 flags 0x1
[ 0.617321] pnp 00:0c: add irq 5 flags 0x1
[ 0.617395] pnp 00:0c: add dma 1 flags 0x0
[ 0.617465] pnp 00:0c: add dma 0 flags 0x0
[ 0.617534] pnp 00:0c: parse resource options
[ 0.624754] pnp 00:0c: dependent set 0 (acceptable) io min 0x220 max 0x280 align 32 size 16 flags 0x1
[ 0.624904] pnp 00:0c: dependent set 0 (acceptable) io min 0x530 max 0x560 align 16 size 8 flags 0x1
[ 0.625009] pnp 00:0c: dependent set 0 (acceptable) io min 0x388 max 0x3b8 align 16 size 8 flags 0x1
[ 0.625152] pnp 00:0c: dependent set 0 (acceptable) io min 0x330 max 0x360 align 16 size 2 flags 0x1
[ 0.625293] pnp 00:0c: dependent set 0 (acceptable) io min 0x370 max 0x3a0 align 16 size 2 flags 0x1
[ 0.625450] pnp 00:0c: dependent set 0 (acceptable) irq 5 7 9 11 flags 0x1
[ 0.625576] pnp 00:0c: dependent set 0 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
[ 0.625704] pnp 00:0c: dependent set 0 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
[ 0.625998] pnp 00:0c: dependent set 1 (acceptable) io min 0x220 max 0x280 align 32 size 16 flags 0x1
[ 0.626143] pnp 00:0c: dependent set 1 (acceptable) io min 0x530 max 0x560 align 16 size 8 flags 0x1
[ 0.626285] pnp 00:0c: dependent set 1 (acceptable) io min 0x388 max 0x3b8 align 16 size 8 flags 0x1
[ 0.626427] pnp 00:0c: dependent set 1 (acceptable) io min 0x330 max 0x360 align 16 size 2 flags 0x1
[ 0.626569] pnp 00:0c: dependent set 1 (acceptable) io min 0x370 max 0x3a0 align 16 size 2 flags 0x1
[ 0.626722] pnp 00:0c: dependent set 1 (acceptable) irq 5 7 9 11 flags 0x1
[ 0.626845] pnp 00:0c: dependent set 1 (acceptable) dma 0 1 3 (bitmask 0xb) flags 0x0
[ 0.628374] pnp 00:0c: Plug and Play ACPI device, IDs YMH0021 (active)
[ 0.632764] pnp: PnP ACPI: found 13 devices
[ 0.632976] ACPI: ACPI bus type pnp unregistered
[ 0.638502] SCSI subsystem initialized
[ 0.639570] libata version 3.00 loaded.
[ 0.644688] usbcore: registered new interface driver usbfs
[ 0.646154] usbcore: registered new interface driver hub
[ 0.647838] usbcore: registered new device driver usb
[ 0.654007] i2c-core: driver [dummy] registered
[ 0.655604] PCI: Using ACPI for IRQ routing
[ 0.668650] ACPI: RTC can wake from S4
[ 0.674987] pnp: the driver 'system' has been registered
[ 0.675220] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.675632] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.676106] system 00:00: iomem range 0x100000-0x200ffff could not be reserved
[ 0.676621] system 00:00: iomem range 0x2010000-0x203ffff could not be reserved
[ 0.677187] system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.677713] system 00:00: iomem range 0xfef80000-0xfeffffff could not be reserved
[ 0.678263] system 00:00: driver attached
[ 0.678486] system 00:08: ioport range 0x377-0x377 has been reserved
[ 0.678935] system 00:08: ioport range 0x1882-0x1885 has been reserved
[ 0.679334] system 00:08: ioport range 0x1888-0x188d has been reserved
[ 0.679730] system 00:08: ioport range 0x18a0-0x18cf has been reserved
[ 0.680176] system 00:08: ioport range 0x480-0x48f has been reserved
[ 0.680568] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.681006] system 00:08: ioport range 0xfe90-0xfe97 has been reserved
[ 0.681406] system 00:08: ioport range 0xfe9e-0xfe9e has been reserved
[ 0.681785] system 00:08: driver attached
[ 0.729564] pci 0000:00:13.0: CardBus bridge, secondary bus 0000:01
[ 0.730025] pci 0000:00:13.0: IO window: 0x001000-0x0010ff
[ 0.730389] pci 0000:00:13.0: IO window: 0x001400-0x0014ff
[ 0.730753] pci 0000:00:13.0: PREFETCH window: 0x10000000-0x13ffffff
[ 0.731201] pci 0000:00:13.0: MEM window: 0x14000000-0x17ffffff
[ 0.731585] pci 0000:00:13.1: CardBus bridge, secondary bus 0000:05
[ 0.732012] pci 0000:00:13.1: IO window: 0x001c00-0x001cff
[ 0.732373] pci 0000:00:13.1: IO window: 0x002000-0x0020ff
[ 0.732736] pci 0000:00:13.1: PREFETCH window: 0x18000000-0x1bffffff
[ 0.733184] pci 0000:00:13.1: MEM window: 0x1c000000-0x1fffffff
[ 0.735790] pci 0000:00:13.0: power state changed by ACPI to D0
[ 0.736269] pci 0000:00:13.0: enabling device (0000 -> 0003)
[ 0.750134] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.750519] PCI: setting IRQ 11 as level-triggered
[ 0.750611] pci 0000:00:13.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.751225] pci 0000:00:13.0: setting latency timer to 64
[ 0.753359] pci 0000:00:13.1: power state changed by ACPI to D0
[ 0.753751] pci 0000:00:13.1: enabling device (0000 -> 0003)
[ 0.767530] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.767997] pci 0000:00:13.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.768549] pci 0000:00:13.1: setting latency timer to 64
[ 0.768639] bus: 00 index 0 io port: [0, ffff]
[ 0.768997] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.769309] bus: 01 index 0 io port: [1000, 10ff]
[ 0.769624] bus: 01 index 1 io port: [1400, 14ff]
[ 0.769992] bus: 01 index 2 mmio: [10000000, 13ffffff]
[ 0.770328] bus: 01 index 3 mmio: [14000000, 17ffffff]
[ 0.770661] bus: 05 index 0 io port: [1c00, 1cff]
[ 0.771026] bus: 05 index 1 io port: [2000, 20ff]
[ 0.771346] bus: 05 index 2 mmio: [18000000, 1bffffff]
[ 0.771681] bus: 05 index 3 mmio: [1c000000, 1fffffff]
[ 0.772217] NET: Registered protocol family 2
[ 0.790260] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.791768] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.792482] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.793035] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.793415] TCP reno registered
[ 0.799425] NET: Registered protocol family 1
[ 0.810280] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.811791] VFS: Disk quotas dquot_6.5.1
[ 0.812447] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.813574] msgmni has been set to 55
[ 0.814648] io scheduler noop registered
[ 0.815045] io scheduler cfq registered (default)
[ 0.815439] pci 0000:00:08.0: Boot video device
[ 0.831419] vesafb: framebuffer at 0xf8000000, mapped to 0xc3080000, using 937k, total 2048k
[ 0.832076] vesafb: mode is 800x600x8, linelength=800, pages=3
[ 0.832439] vesafb: protected mode interface info at c000:75b2
[ 0.832805] vesafb: pmi: set display start = c00c7614, set palette = c00c765d
[ 0.833263] vesafb: scrolling: redraw
[ 0.833561] vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0
[ 0.862747] Console: switching to colour frame buffer device 100x37
[ 0.887218] fb0: VESA VGA frame buffer device
[ 0.890346] ACPI: AC Adapter [ADP1] (on-line)
[ 0.910290] ACPI: Battery Slot [BAT1] (battery present)
[ 0.915779] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.916895] ACPI: Power Button (FF) [PWRF]
[ 0.919514] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.921299] ACPI: Lid Switch [LID]
[ 0.940290] ACPI: Transitioning device [FAN] to D3
[ 0.955181] fan PNP0C0B:00: registered as cooling_device0
[ 0.968993] ACPI: Fan [FAN] (off)
[ 0.987955] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.003277] processor ACPI0007:00: registered as cooling_device1
[ 1.017165] ACPI: Processor [CPU0] (supports 16 throttling states)
[ 1.039603] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.059214] ACPI: Thermal Zone [THRM] (62 C)
[ 1.073947] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
[ 1.087741] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
[ 1.194935] Non-volatile memory driver v1.2
[ 1.209542] ipmi message handler version 39.2
[ 1.223091] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 1.250270] Hangcheck: Using get_cycles().
[ 1.264100] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.441846] Switched to high resolution mode on CPU 0
[ 1.442706] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.507815] brd: module loaded
[ 1.543382] loop: module loaded
[ 1.564336] Driver 'sd' needs updating - please use bus_type methods
[ 1.579422] Driver 'sr' needs updating - please use bus_type methods
[ 1.597848] scsi0 : ata_generic
[ 1.614503] scsi1 : ata_generic
[ 1.654800] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14
[ 1.668481] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15
[ 1.884127] ata1.00: ATA-4: FUJITSU MHF2043AT, A518, max UDMA/33
[ 1.897590] ata1.00: 8452080 sectors, multi 0: LBA
[ 1.910938] ata1.00: configured for UDMA/33
[ 2.094663] ata2.00: ATAPI: CD-224E, 7.5A, max MWDMA2
[ 2.107667] ata2.00: configured for MWDMA2
[ 2.133013] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHF2043A A518 PQ: 0 ANSI: 5
[ 2.150996] sd 0:0:0:0: [sda] 8452080 512-byte hardware sectors (4327 MB)
[ 2.164708] sd 0:0:0:0: [sda] Write Protect is off
[ 2.177666] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.178645] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.206602] sd 0:0:0:0: [sda] 8452080 512-byte hardware sectors (4327 MB)
[ 2.220891] sd 0:0:0:0: [sda] Write Protect is off
[ 2.234522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.235596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.262897] sda: sda1 sda2 sda3 sda4
[ 2.372838] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.390034] scsi 1:0:0:0: CD-ROM TEAC CD-224E 7.5A PQ: 0 ANSI: 5
[ 2.414410] sr0: scsi3-mmc drive: 2x/59x cd/rw
[ 2.428633] Uniform CD-ROM driver Revision: 3.20
[ 2.445675] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.451472] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.454159] ohci_hcd 0000:00:0b.0: power state changed by ACPI to D0
[ 2.468241] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 2.482388] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 2.499474] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 2.513719] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xf7fff000
[ 3.091495] usb usb1: configuration #1 chosen from 1 choice
[ 3.106944] hub 1-0:1.0: USB hub found
[ 3.120892] hub 1-0:1.0: 2 ports detected
[ 3.649975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.664179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.678554] usb usb1: Product: OHCI Host Controller
[ 3.692544] usb usb1: Manufacturer: Linux 2.6.27.7 ohci_hcd
[ 3.706740] usb usb1: SerialNumber: 0000:00:0b.0
[ 3.723141] usbcore: registered new interface driver cdc_acm
[ 3.737453] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.753298] usbcore: registered new interface driver usblp
[ 3.769162] usbcore: registered new interface driver cdc_wdm
[ 3.783791] Initializing USB Mass Storage driver...
[ 3.799271] usbcore: registered new interface driver usb-storage
[ 3.813638] USB Mass Storage support registered.
[ 3.828961] usbcore: registered new interface driver libusual
[ 3.843273] pnp: the driver 'i8042 kbd' has been registered
[ 3.843547] i8042 kbd 00:05: driver attached
[ 3.844623] pnp: the driver 'i8042 aux' has been registered
[ 3.844909] i8042 aux 00:06: driver attached
[ 3.845978] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.869469] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.883597] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.899918] mice: PS/2 mouse device common for all mice
[ 3.929838] pnp: the driver 'rtc_cmos' has been registered
[ 3.931972] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.945717] rtc0: alarms up to one year, y3k
[ 3.959146] rtc_cmos 00:07: driver attached
[ 3.963384] cpuidle: using governor ladder
[ 3.982754] cpuidle: using governor menu
[ 3.999706] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.013943] usbcore: registered new interface driver hiddev
[ 4.028523] usbcore: registered new interface driver usbhid
[ 4.041753] usbhid: v2.6:USB HID core driver
[ 4.056146] Advanced Linux Sound Architecture Driver Version 1.0.17.
[ 4.136771] pnp: the driver 'snd-opl3sa2-pnpbios' has been registered
[ 4.139031] Marking TSC unstable due to TSC halts in idle
[ 4.178851] snd-opl3sa2-pnpbios 00:0c: driver attached
[ 4.179837] pnp: the driver 'snd-opl3sa2-cpnp' has been registered
[ 4.181120] ALSA device list:
[ 4.194104] #0: Yamaha OPL3-SA23 at 0x370, irq 5, dma 1&0
[ 4.207507] TCP cubic registered
[ 4.220447] Using IPI Shortcut mode
[ 4.286455] VFS: Mounted root (ext2 filesystem) readonly.
[ 4.308528] Freeing unused kernel memory: 248k freed
[ 4.322698] Write protecting the kernel text: 2532k
[ 4.335759] Write protecting the kernel read-only data: 536k
[ 11.702985] pnp: the driver 'serial' has been registered
[ 11.705451] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.706952] serial 00:0a: driver attached
[ 15.389397] pnp: the driver 'parport_pc' has been registered
[ 15.389759] parport_pc 00:0b: reported by Plug and Play ACPI
[ 15.390650] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
[ 15.392157] parport_pc 00:0b: driver attached
[ 16.234544] Yenta: CardBus bridge found at 0000:00:13.0 [1179:0001]
[ 16.359216] Yenta: ISA IRQ mask 0x0618, PCI irq 11
[ 16.359842] Socket status: 30000020
[ 16.397784] Yenta: CardBus bridge found at 0000:00:13.1 [1179:0001]
[ 16.523200] Yenta: ISA IRQ mask 0x0618, PCI irq 11
[ 16.523833] Socket status: 30000007
[ 17.026222] pccard: CardBus card inserted into slot 0
[ 17.027388] PCI: 0000:01:00.0 reg 10 32bit mmio: [0, fff]
[ 17.027729] pci 0000:01:00.0: supports D1
[ 17.027815] pci 0000:01:00.0: supports D2
[ 17.027910] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 17.070260] pci 0000:01:00.0: PME# disabled
[ 17.179388] PCI: 0000:01:00.1 reg 10 32bit mmio: [0, fff]
[ 17.179645] pci 0000:01:00.1: supports D1
[ 17.179707] pci 0000:01:00.1: supports D2
[ 17.179776] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot
[ 17.262802] pci 0000:01:00.1: PME# disabled
[ 17.327635] PCI: 0000:01:00.2 reg 10 32bit mmio: [0, ff]
[ 17.327885] pci 0000:01:00.2: supports D1
[ 17.327946] pci 0000:01:00.2: supports D2
[ 17.328015] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot
[ 17.399182] pci 0000:01:00.2: PME# disabled
[ 17.477583] ohci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[ 17.567279] ohci_hcd 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 17.645324] ohci_hcd 0000:01:00.0: setting latency timer to 64
[ 17.645427] ohci_hcd 0000:01:00.0: OHCI Host Controller
[ 17.745343] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 17.843430] ohci_hcd 0000:01:00.0: irq 11, io mem 0x14000000
[ 18.035281] usb usb2: configuration #1 chosen from 1 choice
[ 18.140714] hub 2-0:1.0: USB hub found
[ 18.231448] hub 2-0:1.0: 3 ports detected
[ 18.423184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.488936] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.577191] usb usb2: Product: OHCI Host Controller
[ 18.840600] usb usb2: Manufacturer: Linux 2.6.27.7 ohci_hcd
[ 18.918694] usb usb2: SerialNumber: 0000:01:00.0
[ 18.976785] ohci_hcd 0000:01:00.1: enabling device (0000 -> 0002)
[ 19.048287] ohci_hcd 0000:01:00.1: PCI INT B -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 19.109325] ohci_hcd 0000:01:00.1: setting latency timer to 64
[ 19.109423] ohci_hcd 0000:01:00.1: OHCI Host Controller
[ 19.170971] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 3
[ 19.281460] ohci_hcd 0000:01:00.1: irq 11, io mem 0x14001000
[ 19.475291] usb usb3: configuration #1 chosen from 1 choice
[ 19.552258] hub 3-0:1.0: USB hub found
[ 19.615430] hub 3-0:1.0: 2 ports detected
[ 19.778901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.795979] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.877156] usb usb3: Product: OHCI Host Controller
[ 19.934196] usb usb3: Manufacturer: Linux 2.6.27.7 ohci_hcd
[ 19.994199] usb usb3: SerialNumber: 0000:01:00.1
[ 20.060693] ehci_hcd 0000:01:00.2: enabling device (0000 -> 0002)
[ 20.139340] ehci_hcd 0000:01:00.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 20.210302] ehci_hcd 0000:01:00.2: EHCI Host Controller
[ 20.285610] ehci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
[ 20.365226] irda_init()
[ 20.365597] NET: Registered protocol family 23
[ 20.421464] ehci_hcd 0000:01:00.2: irq 11, io mem 0x14002000
[ 20.479226] ehci_hcd 0000:01:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.548203] usb usb4: configuration #1 chosen from 1 choice
[ 20.618293] hub 4-0:1.0: USB hub found
[ 20.691427] hub 4-0:1.0: 5 ports detected
[ 20.863186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 20.903204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.967183] usb usb4: Product: EHCI Host Controller
[ 21.034309] usb usb4: Manufacturer: Linux 2.6.27.7 ehci_hcd
[ 21.093224] donauboe 0000:00:11.0: power state changed by ACPI to D0
[ 21.117269] usb usb4: SerialNumber: 0000:01:00.2
[ 21.251437] donauboe 0000:00:11.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 21.253962] IrDA: Registered device irda0
[ 21.254116] toshoboe: Using multiple tasks
[ 23.291295] ppdev: user-space parallel port driver
[ 27.816692] Adding 95980k swap on /dos/swap. Priority:-1 extents:30 across:124856k
[ 1222.703268] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 1222.904022] usb 1-1: configuration #1 chosen from 1 choice
[ 1222.915487] usb 1-1: New USB device found, idVendor=0fe6, idProduct=9700
[ 1222.915621] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1222.915708] usb 1-1: Product: USB 2.0 10/100M Ethernet Adaptor
[ 1224.103469] eth0: register 'dm9601' at usb-0000:00:0b.0-1, Davicom DM9601 USB Ethernet, 00:e0:4c:53:44:58
[ 1224.107532] usbcore: registered new interface driver dm9601
[ 1225.370069] SysRq : Changing Loglevel
[ 1225.370879] Loglevel set to 9
[ 1238.267746] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 1243.567220] NET: Registered protocol family 17
[ 1253.583198] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 1253.780178] eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 1261.705575] usb 1-1: USB disconnect, address 2
[ 1261.744677] eth0: unregister 'dm9601' usb-0000:00:0b.0-1, Davicom DM9601 USB Ethernet
[ 6560.437255] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 6560.634306] usb 1-1: not running at top speed; connect to a high speed hub
[ 6560.688379] usb 1-1: configuration #1 chosen from 1 choice
[ 6560.740280] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6560.780308] usb-storage: device found at 3
[ 6560.816329] usb 1-1: New USB device found, idVendor=058f, idProduct=6362
[ 6560.844192] usb-storage: waiting for device to settle before scanning
[ 6560.868374] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6560.887609] usb 1-1: Product: Mass Storage Device
[ 6560.906435] usb 1-1: Manufacturer: Generic
[ 6561.005246] usb 1-1: SerialNumber: 058F312D81B
[ 6565.871891] usb-storage: device scan complete
[ 6565.895760] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6565.921800] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6565.947770] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6565.972763] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6566.025778] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6566.078818] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 6566.165766] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 6566.261873] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 6589.517806] SysRq : Changing Loglevel
[ 6589.518679] Loglevel set to 0
[ 6599.753999] sd 2:0:0:1: [sdc] 4001760 512-byte hardware sectors (2049 MB)
[ 6599.767986] sd 2:0:0:1: [sdc] Write Protect is off
[ 6599.768198] sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 6599.768281] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 6599.792966] sd 2:0:0:1: [sdc] 4001760 512-byte hardware sectors (2049 MB)
[ 6599.806971] sd 2:0:0:1: [sdc] Write Protect is off
[ 6599.807183] sd 2:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 6599.807265] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 6599.807352] sdc: sdc1 sdc2 sdc3 < sdc5 >
[ 6986.274743] usb 1-1: USB disconnect, address 3
[ 7045.113440] pccard: card ejected from slot 0
[ 7045.146889] ohci_hcd 0000:01:00.0: remove, state 4
[ 7045.148460] usb usb2: USB disconnect, address 1
[ 7045.167409] ohci_hcd 0000:01:00.0: USB bus 2 deregistered
[ 7045.175966] ohci_hcd 0000:01:00.0: PCI INT A disabled
[ 7045.185910] ohci_hcd 0000:01:00.1: remove, state 4
[ 7045.187661] usb usb3: USB disconnect, address 1
[ 7045.192685] ohci_hcd 0000:01:00.1: USB bus 3 deregistered
[ 7045.209380] ohci_hcd 0000:01:00.1: PCI INT B disabled
[ 7045.219145] ehci_hcd 0000:01:00.2: remove, state 4
[ 7045.220777] usb usb4: USB disconnect, address 1
[ 7045.225862] ehci_hcd 0000:01:00.2: USB bus 4 deregistered
[ 7045.243530] ehci_hcd 0000:01:00.2: PCI INT C disabled
[ 7048.448640] SysRq : Changing Loglevel
[ 7048.449536] Loglevel set to 9
[ 7051.108230] pccard: CardBus card inserted into slot 0
[ 7051.120524] PCI: 0000:01:00.0 reg 10 32bit mmio: [0, fff]
[ 7051.132460] pci 0000:01:00.0: supports D1
[ 7051.143928] pci 0000:01:00.0: supports D2
[ 7051.155389] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 7051.167159] pci 0000:01:00.0: PME# disabled
[ 7051.178904] PCI: 0000:01:00.1 reg 10 32bit mmio: [0, fff]
[ 7051.190891] pci 0000:01:00.1: supports D1
[ 7051.202621] pci 0000:01:00.1: supports D2
[ 7051.214297] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot
[ 7051.225995] pci 0000:01:00.1: PME# disabled
[ 7051.237599] PCI: 0000:01:00.2 reg 10 32bit mmio: [0, ff]
[ 7051.249312] pci 0000:01:00.2: supports D1
[ 7051.260753] pci 0000:01:00.2: supports D2
[ 7051.272334] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot
[ 7051.284239] pci 0000:01:00.2: PME# disabled
[ 7051.310973] ohci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[ 7051.328159] ohci_hcd 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7051.341389] ohci_hcd 0000:01:00.0: setting latency timer to 64
[ 7051.360862] ohci_hcd 0000:01:00.0: OHCI Host Controller
[ 7051.393510] ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 7051.409461] ohci_hcd 0000:01:00.0: irq 11, io mem 0x14000000
[ 7051.510536] usb usb2: configuration #1 chosen from 1 choice
[ 7051.528358] hub 2-0:1.0: USB hub found
[ 7051.544181] hub 2-0:1.0: 3 ports detected
[ 7051.763802] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7051.797015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7051.829214] usb usb2: Product: OHCI Host Controller
[ 7051.847506] usb usb2: Manufacturer: Linux 2.6.27.7 ohci_hcd
[ 7051.861542] usb usb2: SerialNumber: 0000:01:00.0
[ 7051.890418] ohci_hcd 0000:01:00.1: enabling device (0000 -> 0002)
[ 7051.939423] ohci_hcd 0000:01:00.1: PCI INT B -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7051.954651] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 7051.970392] ohci_hcd 0000:01:00.1: setting latency timer to 64
[ 7051.985554] ohci_hcd 0000:01:00.1: OHCI Host Controller
[ 7052.016434] ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 3
[ 7052.052346] ohci_hcd 0000:01:00.1: irq 11, io mem 0x14001000
[ 7052.171954] usb usb3: configuration #1 chosen from 1 choice
[ 7052.204885] hub 3-0:1.0: USB hub found
[ 7052.256301] hub 3-0:1.0: 2 ports detected
[ 7052.389705] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7052.431813] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7052.450938] usb usb3: Product: OHCI Host Controller
[ 7052.467671] usb usb3: Manufacturer: Linux 2.6.27.7 ohci_hcd
[ 7052.484568] usb usb3: SerialNumber: 0000:01:00.1
[ 7052.516207] ehci_hcd 0000:01:00.2: enabling device (0000 -> 0002)
[ 7052.567936] ehci_hcd 0000:01:00.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7052.585872] ehci_hcd 0000:01:00.2: EHCI Host Controller
[ 7052.618421] ehci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
[ 7052.678395] ehci_hcd 0000:01:00.2: irq 11, io mem 0x14002000
[ 7052.702206] ehci_hcd 0000:01:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 7052.735436] usb usb4: configuration #1 chosen from 1 choice
[ 7052.775320] hub 4-0:1.0: USB hub found
[ 7052.828627] hub 4-0:1.0: 5 ports detected
[ 7053.064722] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 7053.112341] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7053.130655] usb usb4: Product: EHCI Host Controller
[ 7053.148322] usb usb4: Manufacturer: Linux 2.6.27.7 ehci_hcd
[ 7053.166274] usb usb4: SerialNumber: 0000:01:00.2
[ 7056.969272] ohci_hcd 0000:01:00.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.