1. [ 1304.560087] usb 6-1: new full speed USB device using uhci_hcd and address 2
  2. [ 1304.703141] usb 6-1: not running at top speed; connect to a high speed hub
  3. [ 1304.729353] usb 6-1: configuration #1 chosen from 1 choice
  4. [ 1304.737501] usb 6-1: Ignoring serial port reserved for JTAG
  5. [ 1304.741280] ftdi_sio 6-1:1.1: FTDI USB Serial Device converter detected
  6. [ 1304.741316] usb 6-1: Detected FT2232H
  7. [ 1304.741319] usb 6-1: Number of endpoints 2
  8. [ 1304.741321] usb 6-1: Endpoint 1 MaxPacketSize 64
  9. [ 1304.741324] usb 6-1: Endpoint 2 MaxPacketSize 64
  10. [ 1304.741326] usb 6-1: Setting MaxPacketSize 64
  11. [ 1304.743058] usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0
  12. adam@adam-laptop:~/m1_adam/snapshots/2011-07-13/for-rc3$ sudo jtag
  13.  
  14. UrJTAG 0.10 #
  15. Copyright (C) 2002, 2003 ETC s.r.o.
  16. Copyright (C) 2007, 2008, 2009 Kolja Waschk and the respective authors
  17.  
  18. UrJTAG is free software, covered by the GNU General Public License, and you are
  19. welcome to change it and/or distribute copies of it under certain conditions.
  20. There is absolutely no warranty for UrJTAG.
  21.  
  22. jtag.c:518 main() Warning: UrJTAG may damage your hardware!
  23. Type "quit" to exit, "help" for help.
  24.  
  25. jtag> cable milkymist
  26. Connected to libftdi driver.
  27. jtag> detect
  28. IR length: 6
  29. Chain length: 1
  30. Device Id: 00110100000000001000000010010011 (0x34008093)
  31. Manufacturer: Xilinx (0x093)
  32. Part(0): xc6slx45 (0x4008)
  33. Stepping: 3
  34. Filename: /usr/local/share/urjtag/xilinx/xc6slx45/xc6slx45
  35. jtag> instruction CFG_OUT 000100 BYPASS
  36. jtag> instruction CFG_IN 000101 BYPASS
  37. jtag> pld reconfigure
  38. jtag>