// Tested on ASUS UX32VD
// DO NOT TRY ON ANY OTHER COMPUTER UNLESS YOU KNOW WHAT YOU ARE DOING!
//
// code taken from http://www.aneas.org/knowledge/asus_f3jp_fan_control.php
// and modified for UX32VD
// File: fancntrl.c
// Compile: gcc fancntrl.c -o fanctrl
// Usage: sudo ./fanctrl <fan speed at 40°C> <fan speed at 50°C> <fan speed at 60°C> <fan speed at 70°C> <fan speed at 80°C>
// where <fan speed at T°C> is the fan speed expected at T°C from 0x00 (off) to 0xFF (MAX)
// WARNING!!! This file is proof of concept and is an UGLY hack!
#include <stdio.h> // printf
#include <stdlib.h> // atoi
#include <stdint.h> // uint8_t, uint16_t
#include <string.h> // strcmp
#include <unistd.h> // usleep
#include <sys/io.h> // inb, outb
//#define DEBUG
// IO ports
const uint16_t EC4D = 0x0257; // data register
const uint16_t EC4C = 0x0258; // command register
#define ERROR16 (0xFFFF)
// waits for the status bit to clear, max ERROR16 tries
uint8_t WEIE() {
#ifdef DEBUG
printf("Called : WEIE\n");
#endif
uint16_t Local0 = 0xFFFF;
uint8_t Local1 = inb(EC4C) & 0x02;
while(Local0 != 0 && Local1 == 0x02) {
Local1 = inb(EC4C) & 0x02;
Local0--;
usleep(5*1000); //sleep 5 msec
}
#ifdef DEBUG
printf("Left : WEIE\n");
#endif
return (Local0 == 0);
}
// waits for the status bit to clear, max ERROR16 tries
uint8_t WEOE () {
#ifdef DEBUG
printf("Called : WEOE\n");
#endif
uint16_t Local0 = 0xFFFF;
uint8_t Local1 = inb(EC4C) & 0x01;
while(Local0 != 0 && Local1 == 0x01) {
Local1 = inb(EC4C) & 0x01;
Local0--;
usleep(5*1000); //sleep 5 msec
inb(EC4D); // maybe not needed?
}
#ifdef DEBUG
printf("Left : WEOE\n");
#endif
return (Local0 == 0);
}
uint8_t WEOF() {
#ifdef DEBUG
printf("Called : WEOF\n");
#endif
uint16_t Local0 = 0xFFFF;
uint8_t Local1 = inb(EC4C) & 0x01;
while(Local0 != 0 && Local1 == 0x01) {
Local1 = inb(EC4C) & 0x01;
Local0--;
usleep(5*1000); //sleep 5 msec
}
#ifdef DEBUG
printf("Left : WEOF\n");
#endif
return (Local0 == 0);
}
/* read from RAM */
uint16_t RRAM (uint16_t Arg0) {
uint16_t Local0, Local1;
Local0 = Arg0;
Local1 = Local0 & 0xFF;
Local0 = (Local0 >> 0x08);
Local0 = Local0 & 0xFF;
if (WEOE() != 0){ return ERROR16; }
if (WEIE() != 0){ return ERROR16; }
outb(0xFF, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(0x80, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(Local0, EC4D);
if (WEIE() != 0){ return ERROR16; }
outb(Local1, EC4D);
if (WEIE() != 0){ return ERROR16; }
if (WEOF() != 0){ return ERROR16; }
return inb(EC4D);
}
/* write to RAM */
uint16_t WRAM (uint16_t Arg0, uint8_t Arg1) {
uint16_t Local0, Local1;
Local0 = Arg0;
Local1 = Local0 & 0xFF;
Local0 = (Local0 >> 0x08);
Local0 = Local0 & 0xFF;
if (WEOE() != 0){ return ERROR16; }
if (WEIE() != 0){ return ERROR16; }
outb(0xFF, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(0x81, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(Local0, EC4D);
if (WEIE() != 0){ return ERROR16; }
outb(Local1, EC4D);
if (WEIE() != 0){ return ERROR16; }
outb(Arg1, EC4D);
if (WEIE() != 0){ return ERROR16; }
return 0;
}
// sets the QUIET fan speed
uint16_t WMFN (uint8_t Arg0) { //ST98
#ifdef DEBUG
printf("Called : WMFN 0x%X\n", Arg0);
#endif
if (WEOE() != 0){ return ERROR16; }
if (WEIE() != 0){ return ERROR16; }
outb(0xFF, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(0x98, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(Arg0, EC4D);
if (WEIE() != 0){ return ERROR16; }
if (WEIE() != 0){ return ERROR16; } //not needed?
#ifdef DEBUG
printf("Left : WMFN\n");
#endif
return 0;
}
/*
ST83 Arg0 Arg1
Read speed of the fan(s). DOES NOT WORK IN MANUAL MODE
Args:
Arg0 - 0 = fan1
- 1 = fan2
Returns:
- fan speed 0x0(OFF) - 0xFF(MAX)
*/
uint16_t RFOV (uint8_t Arg0) { //ST83
#ifdef DEBUG
printf("Called : RFOV 0x%X\n", Arg0);
#endif
if (Arg0 > 0x01) {
return ERROR16;
}
if (WEOE() != 0){ return ERROR16; }
if (WEIE() != 0){ return ERROR16; }
outb(0xFF, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(0x83, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(Arg0, EC4D);
if (WEIE() != 0){ return ERROR16; }
if (WEOF() != 0){ return ERROR16; }
#ifdef DEBUG
printf("Left : RFOV\n");
#endif
return inb(EC4D);
}
/*
ST84 Arg0 Arg1
Sets speed of the fan(s)
Args:
Arg0 - 0 = fan1
- 1 = fan2
Arg1 - fan speed 0x0(OFF) - 0xFF(MAX)
*/
uint16_t WFOV (uint8_t Arg0, uint8_t Arg1) { //ST84
if (Arg0 > 0x01) {
return ERROR16;
}
if (WEOE() != 0){ return ERROR16; }
if (WEIE() != 0){ return ERROR16; }
outb(0xFF, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(0x84, EC4C);
if (WEIE() != 0){ return ERROR16; }
outb(Arg0, EC4D);
if (WEIE() != 0){ return ERROR16; }
outb(Arg1, EC4D);
if (WEIE() != 0){ return ERROR16; }
return 0;
}
/*
SFNV Arg0 Arg1
Sets speed of the fan(s)
Args:
Arg0 - 0 to reset fans to AUTO
- 1 = fan1
- 2 = fan2
Arg1 - if Arg0 == 0, then 0x1 bit reset fan1 0x2 bit reset fan2
- fan speed 0x0(OFF) - 0xFF(MAX)
*/
#define SFNV_SET_FAN1 (0x01)
#define SFNV_SET_FAN2 (0x02)
#define SFNV_AUTO_FAN1 (0x01)
#define SFNV_AUTO_FAN2 (0x02)
#define SFNV_AUTO_ALL (SFNV_AUTO_FAN1 | SFNV_AUTO_FAN2)
uint16_t SFNV (uint8_t Arg0, uint8_t Arg1) {
uint16_t Local0;
// Set the fans to automatic
if (Arg0 == 0) {
// set fan1 to AUTO
if (Arg1 & SFNV_AUTO_FAN1) {
if ((Local0 = RRAM(0x0521)) == ERROR16) {return ERROR16; };
Local0 |= 0x80;
WRAM (0x0521, (uint8_t) (0xFF & Local0)); //ignore error?
}
// set fan2 to AUTO
if (Arg1 & SFNV_AUTO_FAN2) {
if ((Local0 = RRAM(0x0522)) == ERROR16) {return ERROR16; };
Local0 |= 0x80;
WRAM (0x0522, (uint8_t) (0xFF & Local0)); //ignore error?
}
return 0;
}
// Set the speed of fan1
else if (Arg0 == SFNV_SET_FAN1) {
if ((Local0 = RRAM(0x0521)) == ERROR16) {return ERROR16; };
Local0 &= 0x7F;
WRAM (0x0521, (uint8_t) (0xFF & Local0)); //ignore error?
// DECF |= 0x1
return WFOV (0x00, Arg1);
}
// Set the speed of fan2
else if (Arg0 == SFNV_SET_FAN2) {
if ((Local0 = RRAM(0x0522) == ERROR16)) {return ERROR16; };
Local0 &= 0x7F;
WRAM (0x0522, (uint8_t) (0xFF & Local0)); //ignore error?
// DECF |= 0x2
return WFOV (0x01, Arg1);
}
return ERROR16;
}
int set(int speed) {
if(ioperm(EC4D, 1, 1)) {
printf("Error: could not gain access to IO port EC4D (0x%X). Are you root?\n", EC4D);
return 1;
}
if(ioperm(EC4C, 1, 1)) {
printf("Error: could not gain access to IO port EC4C (0x%X). Are you root?\n", EC4C);
return 1;
}
#if 0
printf("Fan speeds: \tFan1: %d, Fan2: %d\n", RFOV(0x00), RFOV(0x01));
#endif
if (WMFN(speed)) {
printf("error\n");
}
else {
printf("speed has been set to %d\n",speed);
}
// Set FAN1 speed to 0xFF (MAX)
// SFNV(0x1, 0xFF);
// Set FAN2 speed to 0x00 (OFF)
// SFNV(0x2, 0x00);
// reset both fans back to AUTO control
// SFNV(0x0, 0x01|0x02);
return 0;
}
int main(int argc, char ** argv) {
if(argc != 6) {
printf("usage:\n %s speed[40] speed[50] speed[60] speed[70] speed[80]\n", argv[0]);
printf("speed[T] is the speed you expect at temperature T (°C)\n");
return 1;
}
uint8_t speed = 0xFF;
int speed40 = atoi(argv[1]);
int speed50 = atoi(argv[2]);
int speed60 = atoi(argv[3]);
int speed70 = atoi(argv[4]);
int speed80 = atoi(argv[5]);
if(speed40 < 1 || speed40 > 255) {
printf("Error: the speed %d is not possible\n", speed40);
return 1;
}
if(speed50 < 1 || speed50 > 255) {
printf("Error: the speed %d is not possible\n", speed50);
return 1;
}
if(speed60 < 1 || speed60 > 255) {
printf("Error: the speed %d is not possible\n", speed60);
return 1;
}
if(speed70 < 1 || speed70 > 255) {
printf("Error: the speed %d is not possible\n", speed70);
return 1;
}
if(speed80 < 1 || speed80 > 255) {
printf("Error: the speed %d is not possible\n", speed80);
return 1;
}
FILE *fp;
int temperature;
while(1){
fp = fopen("/sys/class/thermal/thermal_zone0/temp", "r");
fscanf(fp, "%d", &temperature);
fclose(fp);
printf("temperature: %d\n",temperature);
if (temperature < 40000)
speed = speed40;
else if (temperature < 50000)
speed = speed40 + (temperature-40000)*(speed50-speed40)/10000;
else if (temperature < 60000)
speed = speed50 + (temperature-50000)*(speed60-speed50)/10000;
else if (temperature < 70000)
speed = speed60 + (temperature-60000)*(speed70-speed60)/10000;
else
{speed = speed70 + (temperature-35000)*(speed80-speed70)/10000;
if (speed > 255) speed = 255;}
set(speed);
sleep(5);}
}