1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.1.0-7.fc16.i686 (mockbuild@x86-11.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Nov 1 21:00:16 UTC 2011
  4. [ 0.000000] Disabled fast string operations
  5. [ 0.000000] BIOS-provided physical RAM map:
  6. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  7. [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  8. [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  9. [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
  10. [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fffffc0 (ACPI data)
  11. [ 0.000000] BIOS-e820: 000000003fffffc0 - 0000000040000000 (ACPI NVS)
  12. [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
  13. [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
  14. [ 0.000000] Using x86 segment limits to approximate NX protection
  15. [ 0.000000] DMI 2.3 present.
  16. [ 0.000000] DMI: Notebook MIM2030-MP/MIM2030-MP, BIOS M1.00 11/04/2004
  17. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  18. [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  19. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
  20. [ 0.000000] MTRR default type: uncachable
  21. [ 0.000000] MTRR fixed ranges enabled:
  22. [ 0.000000] 00000-9FFFF write-back
  23. [ 0.000000] A0000-BFFFF uncachable
  24. [ 0.000000] C0000-CBFFF write-protect
  25. [ 0.000000] CC000-DFFFF uncachable
  26. [ 0.000000] E0000-FFFFF write-protect
  27. [ 0.000000] MTRR variable ranges enabled:
  28. [ 0.000000] 0 base 000000000 mask FC0000000 write-back
  29. [ 0.000000] 1 disabled
  30. [ 0.000000] 2 disabled
  31. [ 0.000000] 3 disabled
  32. [ 0.000000] 4 disabled
  33. [ 0.000000] 5 disabled
  34. [ 0.000000] 6 disabled
  35. [ 0.000000] 7 disabled
  36. [ 0.000000] PAT not supported by CPU.
  37. [ 0.000000] initial memory mapped : 0 - 01000000
  38. [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
  39. [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
  40. [ 0.000000] 0000000000 - 0000400000 page 4k
  41. [ 0.000000] 0000400000 - 0037000000 page 2M
  42. [ 0.000000] 0037000000 - 00373fe000 page 4k
  43. [ 0.000000] kernel direct mapping tables up to 373fe000 @ ffa000-1000000
  44. [ 0.000000] RAMDISK: 3f50c000 - 3ffcf000
  45. [ 0.000000] Allocated new RAMDISK: 3693b000 - 373fdef3
  46. [ 0.000000] Move RAMDISK from 000000003f50c000 - 000000003ffceef2 to 3693b000 - 373fdef2
  47. [ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
  48. [ 0.000000] ACPI: RSDT 3fffcf96 00034 (v01 INSYDE RSDT_000 00000001 _CSI 00010103)
  49. [ 0.000000] ACPI: FACP 3ffffb00 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010103)
  50. [ 0.000000] ACPI: DSDT 3fffd230 028CB (v01 INSYDE INTELIC4 00001004 INTL 02002025)
  51. [ 0.000000] ACPI: FACS 3fffffc0 00040
  52. [ 0.000000] ACPI: BOOT 3ffffb90 00028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010103)
  53. [ 0.000000] ACPI: DBGP 3ffffbc0 00034 (v01 INSYDE DBGP_000 00000100 _CSI 00010103)
  54. [ 0.000000] ACPI: SSDT 3fffcfca 0010C (v01 INSYDE GV3Ref 00001001 INTL 02012044)
  55. [ 0.000000] 139MB HIGHMEM available.
  56. [ 0.000000] 883MB LOWMEM available.
  57. [ 0.000000] mapped low ram: 0 - 373fe000
  58. [ 0.000000] low ram: 0 - 373fe000
  59. [ 0.000000] Zone PFN ranges:
  60. [ 0.000000] DMA 0x00000010 -> 0x00001000
  61. [ 0.000000] Normal 0x00001000 -> 0x000373fe
  62. [ 0.000000] HighMem 0x000373fe -> 0x0003fff0
  63. [ 0.000000] Movable zone start PFN for each node
  64. [ 0.000000] early_node_map[2] active PFN ranges
  65. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  66. [ 0.000000] 0: 0x00000100 -> 0x0003fff0
  67. [ 0.000000] On node 0 totalpages: 262015
  68. [ 0.000000] free_area_init_node: node 0, pgdat c0aa3f40, node_mem_map f613a200
  69. [ 0.000000] DMA zone: 32 pages used for memmap
  70. [ 0.000000] DMA zone: 0 pages reserved
  71. [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
  72. [ 0.000000] Normal zone: 1736 pages used for memmap
  73. [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
  74. [ 0.000000] HighMem zone: 280 pages used for memmap
  75. [ 0.000000] HighMem zone: 35546 pages, LIFO batch:7
  76. [ 0.000000] Using APIC driver default
  77. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
  78. [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
  79. [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
  80. [ 0.000000] APIC: disable apic facility
  81. [ 0.000000] APIC: switched to apic NOOP
  82. [ 0.000000] nr_irqs_gsi: 16
  83. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  84. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  85. [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  86. [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
  87. [ 0.000000] Booting paravirtualized kernel on bare hardware
  88. [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
  89. [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5c00000 s29504 r0 d23744 u4194304
  90. [ 0.000000] pcpu-alloc: s29504 r0 d23744 u4194304 alloc=1*4194304
  91. [ 0.000000] pcpu-alloc: [0] 0
  92. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
  93. [ 0.000000] Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-16-i686-Live-Desktop.iso rootfstype=auto ro liveimg quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0
  94. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  95. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  96. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  97. [ 0.000000] Initializing CPU#0
  98. [ 0.000000] allocated 4193792 bytes of page_cgroup
  99. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  100. [ 0.000000] Initializing HighMem for node 0 (000373fe:0003fff0)
  101. [ 0.000000] Memory: 1015472k/1048512k available (4189k kernel code, 32588k reserved, 2691k data, 592k init, 143304k highmem)
  102. [ 0.000000] virtual kernel memory layout:
  103. [ 0.000000] fixmap : 0xffa95000 - 0xfffff000 (5544 kB)
  104. [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
  105. [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
  106. [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
  107. [ 0.000000] .init : 0xc0ab9000 - 0xc0b4d000 ( 592 kB)
  108. [ 0.000000] .data : 0xc081754a - 0xc0ab8200 (2691 kB)
  109. [ 0.000000] .text : 0xc0400000 - 0xc081754a (4189 kB)
  110. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  111. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  112. [ 0.000000] Hierarchical RCU implementation.
  113. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  114. [ 0.000000] NR_IRQS:1280
  115. [ 0.000000] CPU 0 irqstacks, hard=f5818000 soft=f581a000
  116. [ 0.000000] Console: colour VGA+ 80x25
  117. [ 0.000000] console [tty0] enabled
  118. [ 0.000000] Fast TSC calibration using PIT
  119. [ 0.000000] Detected 1695.722 MHz processor.
  120. [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.44 BogoMIPS (lpj=1695722)
  121. [ 0.001009] pid_max: default: 32768 minimum: 301
  122. [ 0.001131] Security Framework initialized
  123. [ 0.001148] SELinux: Initializing.
  124. [ 0.002010] SELinux: Starting in permissive mode
  125. [ 0.002140] Mount-cache hash table entries: 512
  126. [ 0.002702] Initializing cgroup subsys cpuacct
  127. [ 0.002746] Initializing cgroup subsys memory
  128. [ 0.002769] Initializing cgroup subsys devices
  129. [ 0.002773] Initializing cgroup subsys freezer
  130. [ 0.002776] Initializing cgroup subsys net_cls
  131. [ 0.002780] Initializing cgroup subsys blkio
  132. [ 0.002789] Initializing cgroup subsys perf_event
  133. [ 0.002860] Disabled fast string operations
  134. [ 0.002871] mce: CPU supports 5 MCE banks
  135. [ 0.002970] SMP alternatives: switching to UP code
  136. [ 0.006199] Freeing SMP alternatives: 12k freed
  137. [ 0.006207] ACPI: Core revision 20110623
  138. [ 0.008040] ACPI: setting ELCR to 0200 (from 0ca8)
  139. [ 0.009009] ftrace: allocating 24277 entries in 48 pages
  140. [ 0.010085] weird, boot CPU (#0) not listed by the BIOS.
  141. [ 0.011003] SMP motherboard not detected.
  142. [ 0.011006] Local APIC not detected. Using dummy APIC emulation.
  143. [ 0.011009] SMP disabled
  144. [ 0.011012] Performance Events:
  145. [ 0.011015] no APIC, boot with the "lapic" boot parameter to force-enable it.
  146. [ 0.011018] no hardware sampling interrupt available.
  147. [ 0.011022] p6 PMU driver.
  148. [ 0.011026] ... version: 0
  149. [ 0.011028] ... bit width: 32
  150. [ 0.011031] ... generic registers: 2
  151. [ 0.011033] ... value mask: 00000000ffffffff
  152. [ 0.011036] ... max period: 000000007fffffff
  153. [ 0.011038] ... fixed-purpose events: 0
  154. [ 0.011040] ... event mask: 0000000000000003
  155. [ 0.011524] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
  156. [ 0.011549] Brought up 1 CPUs
  157. [ 0.011552] Total of 1 processors activated (3391.44 BogoMIPS).
  158. [ 0.012059] devtmpfs: initialized
  159. [ 0.012448] PM: Registering ACPI NVS region at 3fffffc0 (64 bytes)
  160. [ 0.013880] atomic64 test passed for i586+ platform with CX8 and with SSE
  161. [ 0.013914] RTC time: 17:45:50, date: 11/05/11
  162. [ 0.014037] NET: Registered protocol family 16
  163. [ 0.014365] ACPI: bus type pci registered
  164. [ 0.014612] PCI: PCI BIOS revision 2.10 entry at 0xe97b4, last bus=2
  165. [ 0.014615] PCI: Using configuration type 1 for base access
  166. [ 0.016566] bio: create slab <bio-0> at 0
  167. [ 0.016756] ACPI: Added _OSI(Module Device)
  168. [ 0.016759] ACPI: Added _OSI(Processor Device)
  169. [ 0.016762] ACPI: Added _OSI(3.0 _SCP Extensions)
  170. [ 0.016765] ACPI: Added _OSI(Processor Aggregator Device)
  171. [ 0.017412] ACPI: EC: Look up EC in DSDT
  172. [ 0.019230] ACPI: Interpreter enabled
  173. [ 0.019239] ACPI: (supports S0 S3 S4 S5)
  174. [ 0.019263] ACPI: Using PIC for interrupt routing
  175. [ 0.027825] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
  176. [ 0.027932] ACPI: No dock devices found.
  177. [ 0.027935] HEST: Table not found.
  178. [ 0.027940] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  179. [ 0.028062] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  180. [ 0.028286] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
  181. [ 0.028290] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
  182. [ 0.028295] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  183. [ 0.028299] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
  184. [ 0.028302] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored)
  185. [ 0.028307] pci_root PNP0A03:00: host bridge window [mem 0xffb80000-0xffbfffff] (ignored)
  186. [ 0.028311] pci_root PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored)
  187. [ 0.028314] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
  188. [ 0.028330] pci 0000:00:00.0: [8086:3340] type 0 class 0x000600
  189. [ 0.028339] pci 0000:00:00.0: reg 10: [mem 0xb0000000-0xb3ffffff pref]
  190. [ 0.028381] pci 0000:00:01.0: [8086:3341] type 1 class 0x000604
  191. [ 0.028439] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
  192. [ 0.028485] pci 0000:00:1d.0: reg 20: [io 0x1200-0x121f]
  193. [ 0.028520] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
  194. [ 0.028565] pci 0000:00:1d.1: reg 20: [io 0x1600-0x161f]
  195. [ 0.028612] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
  196. [ 0.028635] pci 0000:00:1d.7: reg 10: [mem 0xfebff000-0xfebff3ff]
  197. [ 0.028716] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  198. [ 0.028722] pci 0000:00:1d.7: PME# disabled
  199. [ 0.028743] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
  200. [ 0.028786] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
  201. [ 0.028854] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
  202. [ 0.028860] pci 0000:00:1f.0: quirk: [io 0x1300-0x133f] claimed by ICH4 GPIO
  203. [ 0.028876] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
  204. [ 0.028891] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
  205. [ 0.028902] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
  206. [ 0.028913] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
  207. [ 0.028924] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
  208. [ 0.028935] pci 0000:00:1f.1: reg 20: [io 0x1100-0x110f]
  209. [ 0.028946] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
  210. [ 0.028976] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
  211. [ 0.029032] pci 0000:00:1f.3: reg 20: [io 0x1400-0x141f]
  212. [ 0.029070] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
  213. [ 0.029087] pci 0000:00:1f.5: reg 10: [io 0xe000-0xe0ff]
  214. [ 0.029097] pci 0000:00:1f.5: reg 14: [io 0xe100-0xe13f]
  215. [ 0.029108] pci 0000:00:1f.5: reg 18: [mem 0xf0000400-0xf00005ff]
  216. [ 0.029118] pci 0000:00:1f.5: reg 1c: [mem 0xf0000600-0xf00006ff]
  217. [ 0.029157] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
  218. [ 0.029163] pci 0000:00:1f.5: PME# disabled
  219. [ 0.029180] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
  220. [ 0.029197] pci 0000:00:1f.6: reg 10: [io 0xe200-0xe2ff]
  221. [ 0.029207] pci 0000:00:1f.6: reg 14: [io 0xe300-0xe37f]
  222. [ 0.029260] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
  223. [ 0.029265] pci 0000:00:1f.6: PME# disabled
  224. [ 0.029292] pci 0000:01:00.0: [1002:4e50] type 0 class 0x000300
  225. [ 0.029308] pci 0000:01:00.0: reg 10: [mem 0xa8000000-0xafffffff pref]
  226. [ 0.029316] pci 0000:01:00.0: reg 14: [io 0xc100-0xc1ff]
  227. [ 0.029325] pci 0000:01:00.0: reg 18: [mem 0xe0010000-0xe001ffff]
  228. [ 0.029350] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
  229. [ 0.029370] pci 0000:01:00.0: supports D1 D2
  230. [ 0.029405] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  231. [ 0.029410] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
  232. [ 0.029414] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff]
  233. [ 0.029419] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff pref]
  234. [ 0.029445] pci 0000:02:01.0: [8086:4220] type 0 class 0x000280
  235. [ 0.029463] pci 0000:02:01.0: reg 10: [mem 0xd0001000-0xd0001fff]
  236. [ 0.029527] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
  237. [ 0.029532] pci 0000:02:01.0: PME# disabled
  238. [ 0.029552] pci 0000:02:02.0: [10ec:8139] type 0 class 0x000200
  239. [ 0.029570] pci 0000:02:02.0: reg 10: [io 0xa100-0xa1ff]
  240. [ 0.029580] pci 0000:02:02.0: reg 14: [mem 0xd0000b00-0xd0000bff]
  241. [ 0.029635] pci 0000:02:02.0: supports D1 D2
  242. [ 0.029638] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
  243. [ 0.029644] pci 0000:02:02.0: PME# disabled
  244. [ 0.029663] pci 0000:02:04.0: [1524:1411] type 2 class 0x000607
  245. [ 0.029681] pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
  246. [ 0.029700] pci 0000:02:04.0: supports D1 D2
  247. [ 0.029703] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
  248. [ 0.029709] pci 0000:02:04.0: PME# disabled
  249. [ 0.029727] pci 0000:02:04.1: [1524:0530] type 0 class 0x000501
  250. [ 0.029745] pci 0000:02:04.1: reg 10: [mem 0xd0000800-0xd000087f]
  251. [ 0.029808] pci 0000:02:04.1: supports D1 D2
  252. [ 0.029811] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot
  253. [ 0.029817] pci 0000:02:04.1: PME# disabled
  254. [ 0.029835] pci 0000:02:04.2: [1524:0550] type 0 class 0x000805
  255. [ 0.029853] pci 0000:02:04.2: reg 10: [mem 0xd0000900-0xd00009ff]
  256. [ 0.029916] pci 0000:02:04.2: supports D1 D2
  257. [ 0.029919] pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
  258. [ 0.029925] pci 0000:02:04.2: PME# disabled
  259. [ 0.029943] pci 0000:02:04.3: [1524:0520] type 0 class 0x000501
  260. [ 0.029961] pci 0000:02:04.3: reg 10: [mem 0xd0000a00-0xd0000a7f]
  261. [ 0.030035] pci 0000:02:04.3: supports D1 D2
  262. [ 0.030039] pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot
  263. [ 0.030044] pci 0000:02:04.3: PME# disabled
  264. [ 0.030067] pci 0000:02:05.0: [1106:3044] type 0 class 0x000c00
  265. [ 0.030085] pci 0000:02:05.0: reg 10: [mem 0xd0000000-0xd00007ff]
  266. [ 0.030096] pci 0000:02:05.0: reg 14: [io 0xa000-0xa07f]
  267. [ 0.030153] pci 0000:02:05.0: supports D2
  268. [ 0.030156] pci 0000:02:05.0: PME# supported from D2 D3hot D3cold
  269. [ 0.030161] pci 0000:02:05.0: PME# disabled
  270. [ 0.030198] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
  271. [ 0.030204] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
  272. [ 0.030209] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff]
  273. [ 0.030215] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x9fffffff pref]
  274. [ 0.030219] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
  275. [ 0.030223] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
  276. [ 0.030260] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
  277. [ 0.030274] pci_bus 0000:00: on NUMA node 0
  278. [ 0.030278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  279. [ 0.030334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
  280. [ 0.030435] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
  281. [ 0.032862] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
  282. [ 0.032933] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
  283. [ 0.033012] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
  284. [ 0.033079] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
  285. [ 0.033143] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 *11)
  286. [ 0.033196] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 11) *0, disabled.
  287. [ 0.033259] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *3
  288. [ 0.033320] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
  289. [ 0.033440] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  290. [ 0.033446] vgaarb: loaded
  291. [ 0.033448] vgaarb: bridge control possible 0000:01:00.0
  292. [ 0.033612] SCSI subsystem initialized
  293. [ 0.033679] libata version 3.00 loaded.
  294. [ 0.033753] usbcore: registered new interface driver usbfs
  295. [ 0.033773] usbcore: registered new interface driver hub
  296. [ 0.033806] usbcore: registered new device driver usb
  297. [ 0.033916] PCI: Using ACPI for IRQ routing
  298. [ 0.033920] PCI: pci_cache_line_size set to 64 bytes
  299. [ 0.033990] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  300. [ 0.034003] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
  301. [ 0.034163] NetLabel: Initializing
  302. [ 0.034166] NetLabel: domain hash size = 128
  303. [ 0.034168] NetLabel: protocols = UNLABELED CIPSOv4
  304. [ 0.034185] NetLabel: unlabeled traffic allowed by default
  305. [ 0.034200] Switching to clocksource pit
  306. [ 0.046400] pnp: PnP ACPI init
  307. [ 0.046427] ACPI: bus type pnp registered
  308. [ 0.049183] pnp 00:00: [bus 00-ff]
  309. [ 0.049188] pnp 00:00: [io 0x0cf8-0x0cff]
  310. [ 0.049192] pnp 00:00: [io 0x0000-0x0cf7 window]
  311. [ 0.049196] pnp 00:00: [io 0x0d00-0xffff window]
  312. [ 0.049199] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  313. [ 0.049222] pnp 00:00: [mem 0x000d0000-0x000dffff window]
  314. [ 0.049226] pnp 00:00: [mem 0x000c0000-0x000cffff window]
  315. [ 0.049229] pnp 00:00: [mem 0xffb80000-0xffbfffff]
  316. [ 0.049233] pnp 00:00: [mem 0xfff80000-0xffffffff]
  317. [ 0.049236] pnp 00:00: [mem 0x40000000-0xfebfffff window]
  318. [ 0.049308] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
  319. [ 0.049513] pnp 00:01: [irq 12]
  320. [ 0.049555] pnp 00:01: Plug and Play ACPI device, IDs SYN0c01 SYN0c00 PNP0f13 (active)
  321. [ 0.049569] pnp 00:02: [io 0x0060]
  322. [ 0.049579] pnp 00:02: [io 0x0064]
  323. [ 0.049583] pnp 00:02: [irq 1]
  324. [ 0.049622] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
  325. [ 0.049635] pnp 00:03: [io 0x0070-0x0077]
  326. [ 0.049638] pnp 00:03: [irq 8]
  327. [ 0.049683] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  328. [ 0.049697] pnp 00:04: [io 0x0061]
  329. [ 0.049736] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  330. [ 0.049748] pnp 00:05: [mem 0xfff80000-0xffffffff]
  331. [ 0.049824] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
  332. [ 0.049829] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
  333. [ 0.049846] pnp 00:06: [io 0x0000-0x001f]
  334. [ 0.049849] pnp 00:06: [io 0x0080]
  335. [ 0.049852] pnp 00:06: [io 0x0092]
  336. [ 0.049855] pnp 00:06: [io 0x0081-0x008f]
  337. [ 0.049858] pnp 00:06: [io 0x0090-0x0091]
  338. [ 0.049861] pnp 00:06: [io 0x0093-0x009f]
  339. [ 0.049864] pnp 00:06: [io 0x00c0-0x00df]
  340. [ 0.049867] pnp 00:06: [dma 4]
  341. [ 0.049906] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
  342. [ 0.049920] pnp 00:07: [io 0x002e-0x002f]
  343. [ 0.049923] pnp 00:07: [io 0x0680-0x06ff]
  344. [ 0.049926] pnp 00:07: [io 0x0200-0x020f]
  345. [ 0.049929] pnp 00:07: [io 0x0290-0x0297]
  346. [ 0.049932] pnp 00:07: [io 0x1000-0x107f]
  347. [ 0.049935] pnp 00:07: [io 0x1300-0x133f]
  348. [ 0.049938] pnp 00:07: [io 0x077c-0x077f]
  349. [ 0.050046] system 00:07: [io 0x0680-0x06ff] has been reserved
  350. [ 0.050050] system 00:07: [io 0x0200-0x020f] has been reserved
  351. [ 0.050054] system 00:07: [io 0x0290-0x0297] has been reserved
  352. [ 0.050058] system 00:07: [io 0x1000-0x107f] has been reserved
  353. [ 0.050062] system 00:07: [io 0x1300-0x133f] has been reserved
  354. [ 0.050066] system 00:07: [io 0x077c-0x077f] has been reserved
  355. [ 0.050071] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  356. [ 0.050084] pnp 00:08: [io 0x00f0]
  357. [ 0.050087] pnp 00:08: [irq 13]
  358. [ 0.050128] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
  359. [ 0.050141] pnp 00:09: [mem 0xffb80000-0xffbfffff]
  360. [ 0.050145] pnp 00:09: [mem 0xffb00000-0xffb7ffff]
  361. [ 0.050185] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
  362. [ 0.050205] pnp: PnP ACPI: found 10 devices
  363. [ 0.050208] ACPI: ACPI bus type pnp unregistered
  364. [ 0.087693] Switching to clocksource acpi_pm
  365. [ 0.087727] PCI: max bus depth: 2 pci_try_num: 3
  366. [ 0.087751] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
  367. [ 0.087759] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
  368. [ 0.087765] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
  369. [ 0.087769] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  370. [ 0.087773] pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
  371. [ 0.087779] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff]
  372. [ 0.087783] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff pref]
  373. [ 0.087794] pci 0000:02:04.0: BAR 0: assigned [mem 0xd4000000-0xd4000fff]
  374. [ 0.087801] pci 0000:02:04.0: BAR 0: set to [mem 0xd4000000-0xd4000fff] (PCI address [0xd4000000-0xd4000fff])
  375. [ 0.087806] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff]
  376. [ 0.087810] pci 0000:02:04.0: BAR 15: assigned [mem 0x90000000-0x93ffffff pref]
  377. [ 0.087815] pci 0000:02:04.0: BAR 14: assigned [io 0xa400-0xa4ff]
  378. [ 0.087819] pci 0000:02:04.0: BAR 13: assigned [io 0xa800-0xa8ff]
  379. [ 0.087822] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
  380. [ 0.087826] pci 0000:02:04.0: bridge window [io 0xa800-0xa8ff]
  381. [ 0.087831] pci 0000:02:04.0: bridge window [io 0xa400-0xa4ff]
  382. [ 0.087837] pci 0000:02:04.0: bridge window [mem 0x90000000-0x93ffffff pref]
  383. [ 0.087842] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff]
  384. [ 0.087848] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
  385. [ 0.087852] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
  386. [ 0.087859] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff]
  387. [ 0.087865] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x9fffffff pref]
  388. [ 0.087879] pci 0000:00:01.0: setting latency timer to 64
  389. [ 0.087887] pci 0000:00:1e.0: setting latency timer to 64
  390. [ 0.088005] Switched to NOHz mode on CPU #0
  391. [ 0.088075] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
  392. [ 0.088079] PCI: setting IRQ 5 as level-triggered
  393. [ 0.088085] pci 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
  394. [ 0.088093] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
  395. [ 0.088096] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
  396. [ 0.088100] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
  397. [ 0.088104] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff]
  398. [ 0.088108] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff pref]
  399. [ 0.088112] pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
  400. [ 0.088115] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xdfffffff]
  401. [ 0.088119] pci_bus 0000:02: resource 2 [mem 0x90000000-0x9fffffff pref]
  402. [ 0.088123] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
  403. [ 0.088126] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
  404. [ 0.088130] pci_bus 0000:03: resource 0 [io 0xa800-0xa8ff]
  405. [ 0.088134] pci_bus 0000:03: resource 1 [io 0xa400-0xa4ff]
  406. [ 0.088137] pci_bus 0000:03: resource 2 [mem 0x90000000-0x93ffffff pref]
  407. [ 0.088141] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff]
  408. [ 0.088244] NET: Registered protocol family 2
  409. [ 0.088353] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  410. [ 0.088634] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  411. [ 0.090204] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  412. [ 0.091186] TCP: Hash tables configured (established 131072 bind 65536)
  413. [ 0.091192] TCP reno registered
  414. [ 0.091202] UDP hash table entries: 512 (order: 2, 16384 bytes)
  415. [ 0.091235] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  416. [ 0.091514] NET: Registered protocol family 1
  417. [ 0.091630] pci 0000:01:00.0: Boot video device
  418. [ 0.091637] PCI: CLS mismatch (16 != 64), using 64 bytes
  419. [ 0.091759] Unpacking initramfs...
  420. [ 0.547746] Freeing initrd memory: 11020k freed
  421. [ 0.564879] Simple Boot Flag at 0x37 set to 0x1
  422. [ 0.565466] apm: BIOS not found.
  423. [ 0.565616] Intel AES-NI instructions are not detected.
  424. [ 0.565916] audit: initializing netlink socket (disabled)
  425. [ 0.565937] type=2000 audit(1320515150.564:1): initialized
  426. [ 0.599544] highmem bounce pool size: 64 pages
  427. [ 0.599552] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  428. [ 0.609714] VFS: Disk quotas dquot_6.5.2
  429. [ 0.609907] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  430. [ 0.610974] msgmni has been set to 1725
  431. [ 0.611117] SELinux: Registering netfilter hooks
  432. [ 0.611582] alg: No test for stdrng (krng)
  433. [ 0.611590] NET: Registered protocol family 38
  434. [ 0.611673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  435. [ 0.611731] io scheduler noop registered
  436. [ 0.611734] io scheduler deadline registered
  437. [ 0.611753] io scheduler cfq registered (default)
  438. [ 0.611923] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  439. [ 0.611968] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  440. [ 0.611972] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  441. [ 0.735045] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  442. [ 0.855069] ACPI: AC Adapter [AC] (on-line)
  443. [ 0.855154] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
  444. [ 0.855161] ACPI: Sleep Button [SBTN]
  445. [ 0.855228] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
  446. [ 0.858040] ACPI: Lid Switch [LID]
  447. [ 0.858136] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  448. [ 0.858140] ACPI: Power Button [PWRF]
  449. [ 0.858244] ACPI: acpi_idle registered with cpuidle
  450. [ 0.858273] Marking TSC unstable due to TSC halts in idle
  451. [ 0.861770] ERST: Table is not found!
  452. [ 0.861772] GHES: HEST is not enabled!
  453. [ 0.861789] isapnp: Scanning for PnP cards...
  454. [ 1.218750] isapnp: No Plug & Play device found
  455. [ 1.218855] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  456. [ 1.219354] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
  457. [ 1.219384] serial 0000:00:1f.6: PCI INT B disabled
  458. [ 1.219634] Non-volatile memory driver v1.3
  459. [ 1.219637] Linux agpgart interface v0.103
  460. [ 1.219796] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
  461. [ 1.223613] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xb0000000
  462. [ 1.225364] loop: module loaded
  463. [ 1.225527] ata_piix 0000:00:1f.1: version 2.13
  464. [ 1.225540] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
  465. [ 1.225696] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  466. [ 1.225700] PCI: setting IRQ 11 as level-triggered
  467. [ 1.225706] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  468. [ 1.225752] ata_piix 0000:00:1f.1: setting latency timer to 64
  469. [ 1.226140] scsi0 : ata_piix
  470. [ 1.226244] scsi1 : ata_piix
  471. [ 1.227025] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
  472. [ 1.227030] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
  473. [ 1.227131] Fixed MDIO Bus: probed
  474. [ 1.227200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  475. [ 1.271137] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  476. [ 1.271146] ACPI: Battery Slot [BAT0] (battery present)
  477. [ 1.381543] ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.01, max UDMA/33
  478. [ 1.387288] ata2.00: configured for UDMA/33
  479. [ 1.405072] ata1.00: ATA-6: FUJITSU MHR2030AT, 30B8, max UDMA/100
  480. [ 1.405077] ata1.00: 58605120 sectors, multi 16: LBA48
  481. [ 1.427092] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
  482. [ 1.427095] PCI: setting IRQ 7 as level-triggered
  483. [ 1.427101] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7
  484. [ 1.427120] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  485. [ 1.427125] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  486. [ 1.427228] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  487. [ 1.427265] ehci_hcd 0000:00:1d.7: debug port 1
  488. [ 1.431141] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
  489. [ 1.431266] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xfebff000
  490. [ 1.441030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  491. [ 1.441076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  492. [ 1.441080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  493. [ 1.441084] usb usb1: Product: EHCI Host Controller
  494. [ 1.441087] usb usb1: Manufacturer: Linux 3.1.0-7.fc16.i686 ehci_hcd
  495. [ 1.441090] usb usb1: SerialNumber: 0000:00:1d.7
  496. [ 1.441233] hub 1-0:1.0: USB hub found
  497. [ 1.441240] hub 1-0:1.0: 4 ports detected
  498. [ 1.441331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  499. [ 1.441347] uhci_hcd: USB Universal Host Controller Interface driver
  500. [ 1.441475] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
  501. [ 1.441478] PCI: setting IRQ 10 as level-triggered
  502. [ 1.441484] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
  503. [ 1.441492] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  504. [ 1.441496] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  505. [ 1.441561] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  506. [ 1.441587] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
  507. [ 1.441628] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  508. [ 1.441632] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  509. [ 1.441635] usb usb2: Product: UHCI Host Controller
  510. [ 1.441638] usb usb2: Manufacturer: Linux 3.1.0-7.fc16.i686 uhci_hcd
  511. [ 1.441642] usb usb2: SerialNumber: 0000:00:1d.0
  512. [ 1.441770] hub 2-0:1.0: USB hub found
  513. [ 1.441776] hub 2-0:1.0: 2 ports detected
  514. [ 1.474408] ata1.00: configured for UDMA/100
  515. [ 1.474620] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHR2030A 30B8 PQ: 0 ANSI: 5
  516. [ 1.474856] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
  517. [ 1.474932] sd 0:0:0:0: [sda] Write Protect is off
  518. [ 1.474936] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  519. [ 1.474969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  520. [ 1.475359] sd 0:0:0:0: Attached scsi generic sg0 type 0
  521. [ 1.479418] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-831S 1.01 PQ: 0 ANSI: 5
  522. [ 1.482246] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  523. [ 1.482251] cdrom: Uniform CD-ROM driver Revision: 3.20
  524. [ 1.482366] sr 1:0:0:0: Attached scsi CD-ROM sr0
  525. [ 1.482527] sr 1:0:0:0: Attached scsi generic sg1 type 5
  526. [ 1.664503] sda: sda1 sda2 sda3
  527. [ 1.664920] sd 0:0:0:0: [sda] Attached SCSI disk
  528. [ 1.841104] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
  529. [ 1.841109] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  530. [ 1.841118] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  531. [ 1.841122] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  532. [ 1.841178] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  533. [ 1.841204] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600
  534. [ 1.841240] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  535. [ 1.841244] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  536. [ 1.841247] usb usb3: Product: UHCI Host Controller
  537. [ 1.841250] usb usb3: Manufacturer: Linux 3.1.0-7.fc16.i686 uhci_hcd
  538. [ 1.841254] usb usb3: SerialNumber: 0000:00:1d.1
  539. [ 1.841381] hub 3-0:1.0: USB hub found
  540. [ 1.841386] hub 3-0:1.0: 2 ports detected
  541. [ 1.841515] usbcore: registered new interface driver usbserial
  542. [ 1.841528] USB Serial support registered for generic
  543. [ 1.898030] usb 2-1: new low speed USB device number 2 using uhci_hcd
  544. [ 2.059533] usb 2-1: New USB device found, idVendor=0d62, idProduct=a100
  545. [ 2.059537] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
  546. [ 2.059540] usb 2-1: Product: USB Optical Mouse
  547. [ 2.059543] usb 2-1: Manufacturer: Darfon
  548. [ 2.062638] usbcore: registered new interface driver usbserial_generic
  549. [ 2.062641] usbserial: USB Serial Driver core
  550. [ 2.062704] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  551. [ 2.071280] i8042: Detected active multiplexing controller, rev 1.1
  552. [ 2.076064] serio: i8042 KBD port at 0x60,0x64 irq 1
  553. [ 2.076071] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  554. [ 2.076107] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  555. [ 2.076145] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  556. [ 2.076178] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  557. [ 2.076294] mousedev: PS/2 mouse device common for all mice
  558. [ 2.076516] rtc_cmos 00:03: RTC can wake from S4
  559. [ 2.076627] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  560. [ 2.076645] rtc0: alarms up to one month, 242 bytes nvram
  561. [ 2.076770] device-mapper: uevent: version 1.0.3
  562. [ 2.076890] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
  563. [ 2.077068] cpuidle: using governor ladder
  564. [ 2.077137] cpuidle: using governor menu
  565. [ 2.077394] EFI Variables Facility v0.08 2004-May-17
  566. [ 2.083877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  567. [ 2.090975] input: Darfon USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
  568. [ 2.091131] generic-usb 0003:0D62:A100.0001: input,hidraw0: USB HID v1.10 Mouse [Darfon USB Optical Mouse] on usb-0000:00:1d.0-1/input0
  569. [ 2.091149] usbcore: registered new interface driver usbhid
  570. [ 2.091151] usbhid: USB HID core driver
  571. [ 2.091248] ip_tables: (C) 2000-2006 Netfilter Core Team
  572. [ 2.091280] TCP cubic registered
  573. [ 2.091282] Initializing XFRM netlink socket
  574. [ 2.091528] NET: Registered protocol family 10
  575. [ 2.091899] Mobile IPv6
  576. [ 2.091903] NET: Registered protocol family 17
  577. [ 2.091921] Registering the dns_resolver key type
  578. [ 2.091944] Using IPI No-Shortcut mode
  579. [ 2.092085] PM: Hibernation image not present or could not be loaded.
  580. [ 2.092102] registered taskstats version 1
  581. [ 2.096757] IMA: No TPM chip found, activating TPM-bypass!
  582. [ 2.097372] Magic number: 3:445:794
  583. [ 2.097475] rtc_cmos 00:03: setting system clock to 2011-11-05 17:45:52 UTC (1320515152)
  584. [ 2.098189] Initializing network drop monitor service
  585. [ 2.098288] Freeing unused kernel memory: 592k freed
  586. [ 2.098578] Write protecting the kernel text: 4192k
  587. [ 2.098631] Write protecting the kernel read-only data: 2036k
  588. [ 2.291230] dracut: dracut-013-18.fc16
  589. [ 2.300255] dracut: rd.luks=0: removing cryptoluks activation
  590. [ 2.303641] dracut: root was live:/dev/disk/by-label/Fedora-16-i686-Live-Desktop.iso, liveroot is now live:CDLABEL=Fedora-16-i686-Live-Desktop.iso
  591. [ 2.311728] udevd[100]: starting version 173
  592. [ 2.380419] [drm] Initialized drm 1.1.0 20060810
  593. [ 2.417178] [drm] radeon defaulting to kernel modesetting.
  594. [ 2.417182] [drm] radeon kernel modesetting enabled.
  595. [ 2.417287] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
  596. [ 2.417295] radeon 0000:01:00.0: setting latency timer to 64
  597. [ 2.419081] [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1071:0x8052).
  598. [ 2.419101] [drm] register mmio base: 0xE0010000
  599. [ 2.419103] [drm] register mmio size: 65536
  600. [ 2.421612] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
  601. [ 2.421628] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
  602. [ 2.421664] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
  603. [ 2.421704] radeon 0000:01:00.0: GTT: 64M 0xB0000000 - 0xB3FFFFFF
  604. [ 2.421709] [drm] Generation 2 PCI interface, using max accessible memory
  605. [ 2.421715] radeon 0000:01:00.0: VRAM: 128M 0x00000000A8000000 - 0x00000000AFFFFFFF (128M used)
  606. [ 2.421727] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  607. [ 2.421730] [drm] Driver supports precise vblank timestamp query.
  608. [ 2.421741] [drm] radeon: irq initialized.
  609. [ 2.422061] [drm] Detected VRAM RAM=128M, BAR=128M
  610. [ 2.422065] [drm] RAM width 128bits DDR
  611. [ 2.422159] [TTM] Zone kernel: Available graphics memory: 441896 kiB.
  612. [ 2.422162] [TTM] Zone highmem: Available graphics memory: 513548 kiB.
  613. [ 2.422165] [TTM] Initializing pool allocator.
  614. [ 2.422204] [drm] radeon: 128M of VRAM memory ready
  615. [ 2.422207] [drm] radeon: 64M of GTT memory ready.
  616. [ 2.422269] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
  617. [ 2.423434] radeon 0000:01:00.0: WB disabled
  618. [ 2.424119] [drm] Loading R300 Microcode
  619. [ 2.426534] [drm] radeon: ring at 0x00000000B0001000
  620. [ 2.426557] [drm] ring test succeeded in 1 usecs
  621. [ 2.426854] [drm] radeon: ib pool ready.
  622. [ 2.426962] [drm] ib test succeeded in 0 usecs
  623. [ 2.429515] [drm] Panel ID String: Samsung LTN154X1 WXGA
  624. [ 2.429519] [drm] Panel Size 1280x800
  625. [ 2.440680] [drm] radeon legacy LVDS backlight initialized
  626. [ 2.441048] [drm] Radeon Display Connectors
  627. [ 2.441051] [drm] Connector 0:
  628. [ 2.441053] [drm] VGA
  629. [ 2.441056] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
  630. [ 2.441059] [drm] Encoders:
  631. [ 2.441061] [drm] CRT1: INTERNAL_DAC1
  632. [ 2.441063] [drm] Connector 1:
  633. [ 2.441065] [drm] LVDS
  634. [ 2.441067] [drm] Encoders:
  635. [ 2.441069] [drm] LCD1: INTERNAL_LVDS
  636. [ 2.441071] [drm] Connector 2:
  637. [ 2.441073] [drm] S-video
  638. [ 2.441075] [drm] Encoders:
  639. [ 2.441077] [drm] TV1: INTERNAL_DAC2
  640. [ 2.451248] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
  641. [ 2.451268] [drm] radeon: power management initialized
  642. [ 2.509109] [drm] fb mappable at 0xA8040000
  643. [ 2.509111] [drm] vram apper at 0xA8000000
  644. [ 2.509114] [drm] size 4096000
  645. [ 2.509116] [drm] fb depth is 24
  646. [ 2.509118] [drm] pitch is 5120
  647. [ 2.509251] fbcon: radeondrmfb (fb0) is primary device
  648. [ 2.566490] Console: switching to colour frame buffer device 160x50
  649. [ 2.590331] fb0: radeondrmfb frame buffer device
  650. [ 2.590334] drm: registered panic notifier
  651. [ 2.590340] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0
  652. [ 2.595309] dracut: Starting plymouth daemon
  653. [ 2.939558] dracut: rd.dm=0: removing DM RAID activation
  654. [ 2.948608] dracut: rd.md=0: removing MD RAID activation
  655. [ 2.964147] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb1, caps: 0xa04713/0x0/0x0
  656. [ 3.014522] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input5
  657. [ 3.453826] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
  658. [ 3.453835] firewire_ohci 0000:02:05.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
  659. [ 3.453844] firewire_ohci 0000:02:05.0: setting latency timer to 64
  660. [ 3.455290] sdhci: Secure Digital Host Controller Interface driver
  661. [ 3.455293] sdhci: Copyright(c) Pierre Ossman
  662. [ 3.508084] firewire_ohci: Added fw-ohci device 0000:02:05.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x11
  663. [ 3.508444] sdhci-pci 0000:02:04.2: SDHCI controller found [1524:0550] (rev 0)
  664. [ 3.508468] sdhci-pci 0000:02:04.2: PCI INT B -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  665. [ 3.508546] Registered led device: mmc0::
  666. [ 3.508607] mmc0: SDHCI controller on PCI [0000:02:04.2] using PIO
  667. [ 4.009342] firewire_core: created device fw0: GUID 0040d00100275f5b, S400
  668. [ 4.732784] ISO 9660 Extensions: Microsoft Joliet Level 3
  669. [ 4.774502] ISO 9660 Extensions: RRIP_1991A
  670. [ 4.930365] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  671. [ 9.040609] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
  672. [ 9.366922] dracut: Mounted root filesystem /dev/mapper/live-rw
  673. [ 9.869251] dracut: Switching root
  674. [ 15.592931] type=1404 audit(1320515165.993:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  675. [ 16.577358] SELinux: 2048 avtab hash slots, 96028 rules.
  676. [ 16.610867] SELinux: 2048 avtab hash slots, 96028 rules.
  677. [ 16.622470] SELinux: 9 users, 13 roles, 3892 types, 204 bools, 1 sens, 1024 cats
  678. [ 16.622476] SELinux: 82 classes, 96028 rules
  679. [ 16.632133] SELinux: Completing initialization.
  680. [ 16.632137] SELinux: Setting up existing superblocks.
  681. [ 16.632152] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  682. [ 16.632162] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  683. [ 16.632822] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
  684. [ 16.632834] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  685. [ 16.632850] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  686. [ 16.632899] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
  687. [ 16.633740] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  688. [ 16.633750] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  689. [ 16.636048] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  690. [ 16.636064] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
  691. [ 16.636071] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  692. [ 16.636109] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
  693. [ 16.636122] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
  694. [ 16.636136] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  695. [ 16.636172] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
  696. [ 16.636183] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
  697. [ 16.636193] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  698. [ 16.637004] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  699. [ 16.637056] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  700. [ 16.641038] SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
  701. [ 16.641048] SELinux: initialized (dev loop0, type squashfs), not configured for labeling
  702. [ 16.641054] SELinux: initialized (dev loop2, type squashfs), not configured for labeling
  703. [ 16.641075] SELinux: initialized (dev dm-0, type ext4), uses xattr
  704. [ 16.644383] type=1403 audit(1320515167.045:3): policy loaded auid=4294967295 ses=4294967295
  705. [ 16.651454] systemd[1]: Successfully loaded SELinux policy in 1s 608ms 155us.
  706. [ 16.793956] systemd[1]: Successfully loaded SELinux database in 142ms 242us, size on heap is 362K.
  707. [ 16.995472] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  708. [ 16.997086] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  709. [ 17.168483] systemd[1]: Relabelled /dev and /run in 171ms 102us.
  710. [ 17.518674] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  711. [ 17.519943] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  712. [ 17.521523] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  713. [ 17.522757] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  714. [ 17.523954] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  715. [ 17.525186] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  716. [ 17.526489] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  717. [ 17.527723] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  718. [ 17.527914] systemd[1]: systemd 36 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
  719. [ 18.345746] systemd[1]: Set hostname to <localhost.localdomain>.
  720. [ 25.329260] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
  721. [ 28.799653] systemd-fsck[420]: Root directory is writable, skipping check.
  722. [ 29.628279] udevd[417]: starting version 173
  723. [ 29.915558] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
  724. [ 29.929545] EXT4-fs (dm-0): re-mounted. Opts: (null)
  725. [ 29.932997] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  726. [ 38.960373] rmmod[538]: ERROR: Module scsi_wait_scan does not exist in /proc/modules
  727. [ 42.891467] microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x0
  728. [ 44.612819] intel_rng: Firmware space is locked read-only. If you can't or
  729. [ 44.612826] intel_rng: don't want to disable this in firmware setup, and if
  730. [ 44.612831] intel_rng: you are certain that your system has a functional
  731. [ 44.612836] intel_rng: RNG, try using the 'no_fwh_detect' option.
  732. [ 44.844335] mtp-probe[535]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1"
  733. [ 44.925333] mtp-probe[535]: bus: 2, device: 2 was not an MTP device
  734. [ 45.472311] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
  735. [ 45.779338] lib80211: common routines for IEEE802.11 drivers
  736. [ 45.779349] lib80211_crypt: registered algorithm 'NULL'
  737. [ 45.952516] microcode: CPU0 updated to revision 0x18, date = 2004-10-17
  738. [ 45.953788] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  739. [ 46.132393] iTCO_vendor_support: vendor-support=0
  740. [ 46.139007] yenta_cardbus 0000:02:04.0: CardBus bridge found [1071:8052]
  741. [ 46.139078] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
  742. [ 46.139089] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
  743. [ 46.139102] yenta_cardbus 0000:02:04.0: TI: mfunc 0x010c1202, devctl 0x44
  744. [ 46.406903] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0058, PCI irq 5
  745. [ 46.406916] yenta_cardbus 0000:02:04.0: Socket status: 30000006
  746. [ 46.406929] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
  747. [ 46.406954] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0xa000-0xbfff]
  748. [ 46.406967] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: excluding 0xa000-0xa07f 0xa100-0xa1ff 0xa400-0xa4ff 0xa800-0xa8ff
  749. [ 46.419274] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xdfffffff]
  750. [ 46.419287] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xdfffffff: excluding 0xd0000000-0xd07fffff 0xd4000000-0xd47fffff 0xd8000000-0xdbffffff
  751. [ 46.419372] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x9fffffff pref]
  752. [ 46.419384] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x9fffffff: excluding 0x90000000-0x9fffffff
  753. [ 46.546382] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  754. [ 46.546455] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
  755. [ 46.900723] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
  756. [ 46.900925] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
  757. [ 46.918137] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  758. [ 47.232172] 8139too: 8139too Fast Ethernet driver 0.9.28
  759. [ 47.232617] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
  760. [ 47.232635] 8139too 0000:02:02.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
  761. [ 47.232662] 8139too 0000:02:02.0: setting latency timer to 64
  762. [ 47.236735] 8139too 0000:02:02.0: eth0: RealTek RTL8139 at 0xf89aeb00, 00:40:d0:66:95:f0, IRQ 11
  763. [ 48.053413] cfg80211: Calling CRDA to update world regulatory domain
  764. [ 48.147832] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x290-0x297 0x370-0x377
  765. [ 48.157238] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
  766. [ 48.160583] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
  767. [ 48.161501] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
  768. [ 48.162480] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
  769. [ 48.162697] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
  770. [ 48.162908] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
  771. [ 48.165700] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  772. [ 49.814088] libipw: 802.11 data/management/control stack, git-1.1.13
  773. [ 49.814100] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
  774. [ 50.310770] udevd[460]: renamed network interface eth0 to em2
  775. [ 51.264777] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
  776. [ 51.264788] ipw2200: Copyright(c) 2003-2006 Intel Corporation
  777. [ 51.265095] ipw2200 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  778. [ 51.265142] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
  779. [ 52.192955] ipw2200: Radio Frequency Kill Switch is On:
  780. [ 52.192958] Kill switch must be turned off for wireless networking to work.
  781. [ 52.193351] cfg80211: failed to add phy80211 symlink to netdev!
  782. [ 52.193570] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
  783. [ 52.229553] udevd[457]: renamed network interface eth0 to em1
  784. [ 52.619397] cfg80211: World regulatory domain updated:
  785. [ 52.619409] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  786. [ 52.619421] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  787. [ 52.619433] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  788. [ 52.619445] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  789. [ 52.619456] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  790. [ 52.619467] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  791. [ 53.124971] snd_intel8x0m 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
  792. [ 53.125055] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
  793. [ 53.129605] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
  794. [ 53.129661] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
  795. [ 54.095043] intel8x0_measure_ac97_clock: measured 50143 usecs (2417 samples)
  796. [ 54.095047] intel8x0: clocking to 48000
  797. [ 58.558184] fedora-storage-init[588]: Setting up Logical Volume Management: 2 logical volume(s) in volume group "vg_saturn" now active
  798. [ 59.943972] fedora-storage-init[588]: [ OK ]
  799. [ 62.053090] fedora-storage-init[758]: Setting up Logical Volume Management: 2 logical volume(s) in volume group "vg_saturn" now active
  800. [ 62.081425] fedora-storage-init[758]: [ OK ]
  801. [ 62.817273] lvm[765]: 2 logical volume(s) in volume group "vg_saturn" monitored
  802. [ 63.082852] systemd-tmpfiles[769]: Successfully loaded SELinux database in 56ms 297us, size on heap is 363K.
  803. [ 72.135079] auditd[780]: Started dispatcher: /sbin/audispd pid: 820
  804. [ 72.247093] auditd[780]: Init complete, auditd 2.1.3 listening for events (startup state enable)
  805. [ 77.882172] ip6_tables: (C) 2000-2006 Netfilter Core Team
  806. [ 79.880976] Adding 2064380k swap on /dev/mapper/vg_saturn-lv_swap. Priority:-1 extents:1 across:2064380k
  807. [ 79.976158] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  808. [ 79.982436] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  809. [ 79.987998] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  810. [ 80.469189] nf_conntrack version 0.5.0 (16048 buckets, 64192 max)
  811. [ 93.486042] usb 1-3: new high speed USB device number 3 using ehci_hcd
  812. [ 93.601186] usb 1-3: New USB device found, idVendor=14cd, idProduct=8123
  813. [ 93.601190] usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
  814. [ 93.601194] usb 1-3: Product: USB MassStorage Device
  815. [ 93.601197] usb 1-3: Manufacturer: SDMMC MA8123
  816. [ 93.601200] usb 1-3: SerialNumber: 812320080329
  817. [ 94.186857] usbcore: registered new interface driver uas
  818. [ 94.727374] Initializing USB Mass Storage driver...
  819. [ 94.738029] scsi2 : usb-storage 1-3:1.0
  820. [ 94.743413] usbcore: registered new interface driver usb-storage
  821. [ 94.743417] USB Mass Storage support registered.
  822. [ 95.779078] scsi 2:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
  823. [ 95.784496] sd 2:0:0:0: Attached scsi generic sg2 type 0
  824. [ 95.785498] sd 2:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
  825. [ 95.786115] sd 2:0:0:0: [sdb] Write Protect is off
  826. [ 95.786127] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
  827. [ 95.786618] sd 2:0:0:0: [sdb] No Caching mode page present
  828. [ 95.786630] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  829. [ 95.789747] sd 2:0:0:0: [sdb] No Caching mode page present
  830. [ 95.789760] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  831. [ 95.791230] sdb: sdb1
  832. [ 95.793612] sd 2:0:0:0: [sdb] No Caching mode page present
  833. [ 95.793624] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  834. [ 95.793634] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  835. [ 97.421064] 8139too 0000:02:02.0: em2: link down
  836. [ 97.421790] ADDRCONF(NETDEV_UP): em2: link is not ready
  837. [ 102.008765] 8021q: 802.1Q VLAN Support v1.8
  838. [ 124.871853] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
  839. [ 138.069394] fuse init (API version 7.17)
  840. [ 138.107404] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  841. [ 138.134157] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
  842. [ 174.817944] lp: driver loaded but no devices found
  843. [ 175.303513] ppdev: user-space parallel port driver
  844. [ 216.322354] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
  845.