# ============================================================================
# Configuration file for PMS
# ============================================================================
# Introduction:
#
# This "PMS.conf" file holds the configuration settings for PMS. These settings
# are usually set using the PMS graphical user interface. If you are running
# PMS on a headless system, you may not be able to kick off the GUI; instead,
# you can edit the PMS.conf file to control the operation of PMS. A restart of
# PMS is required after editing this file.
#
# Commenting out an option or leaving it empty forces the PMS default
# that is indicated.
#
# Key value pairs
# ---------------
# The configuration file contains key/value pairs separated by an equals (=)
# sign; the key on the left and the value on the right. The value is edited
# in this file or set using the PMS GUI and saved. The value can take a number
# of different forms:
#
# - toggle: a checkbox or boolean; either "true" or "false"
# - selector: a dropdown menu in the GUI, generating a string or numeric
# value. Available options will usually be stated below
# - string: a short text or a number
# - text: a longer text with embedded line breaks
# - list: a comma-separated list of strings or numbers
#
# In the file below the value type is shown after the GUI option label.
#
# ----------------------------------------------------------------------------
# General Configuration Screen
# ----------------------------------------------------------------------------
# ---< General Settings >-----------------------------------------------------
# Profile Name
# --------------
# An optional identifier used to distinguish this profile (i.e. collection of settings)
# from other profiles. The profile name is displayed in the renderer in square
# brackets after the software name e.g.
#
# PS3 Media Server [myprofile]
#
# See the FAQ for details on how to create and use multiple profiles:
# http://www.ps3mediaserver.org/forum/viewtopic.php?f=6&t=3507&p=49895#p49895
# Default: the server's hostname.
name = "Valler Media Server"
# Interface Language
# -------------------
# GUI option: Language (selector)
# The language to use for the GUI and other dialogues.
# The following translations are available:
# ar = Arab
# bg = Bulgarian
# ca = Catalan
# zhs = Chinese (Simplified)
# zht = Chinese (Traditional)
# cz = Czech
# da = Danish
# nl = Dutch
# en = English
# fi = Finish
# fr = French
# de = German
# el = Greek
# is = Icelandic
# it = Italian
# iw = Hebrew
# ja = Japanese
# ko = Korean
# no = Norwegian
# pl = Polish
# pt = Portuguese
# br = Portuguese (Brazilian)
# ro = Romanian
# ru = Russian
# sl = Slovenian
# es = Spanish
# sv = Swedish
# tr = Turkish
# The short-form code (e.g. = en) is used to set the language.
# Default: empty (""), which means PMS will follow the locale.
language =
# Operating Mode
# --------------
# GUI Option: Start Minimized (toggle)
# Sets whether the GUI should start when the program is launched.
# On headless systems, this should be "true".
# Default: false.
minimized =
# Check for updates
# -----------------
# GUI Option: Check automatically (toggle)
# Default: false.
auto_update =
# ---< Network Settings >-----------------------------------------------------
# Generally these settings should not need to be changed from their defaults or
# settings determined automatically by the system. Changing them may make your
# PMS server disappear from your other devices.
# Interface
# ---------
# GUI Option: Force networking on interface (selector)
# Specifies the (physical) network interface to attach to, should only be
# relevant when the server has more than one network interface and PMS picks
# the wrong one. The selector displays all available network interfaces.
# E.g. network_interface = eth0
# Default: empty, which means PMS will automatically select a network
# interface.
network_interface =
# Specifies a comma separated list of network interfaces to ignore when
# scanning for a suitable network interface to attach to. This is typically
# used to ignore virtual interfaces created by other applications.
# Default: "tap,vmnet,vnic", which ignores interfaces named "tap0",
# "tap1" and "tap2", but it allows an interface named "eth0".
skip_network_interfaces =
# IP Address
# ----------
# GUI Option: Force IP of the server (string)
# A network interface can be have multiple IP addresses associated with it.
# This sets which one should be used.
# Default: empty, which means PMS will automatically select an IP
# address.
hostname =
# Server port
# -----------
# GUI Option: Force the port of the server (string)
# Sets the port PMS will listen on; usually should not need to be set unless
# another service has already grabbed the port.
# Default: empty, which means PMS will automatically pick port 5001.
port =
# Client Filter
# -------------
# GUI Option: Use an IP filter (string)
# Set the IP address(es) and/or IP address range(s) of the clients permitted to connect.
# When no filter is specified, PMS will allow any IP address to connect to the
# service.
# Multiple IP addresses and/or IP address ranges can be separated with a comma
# or semicolon e.g.: 127.0.0.1,192.168.0-1.*
# Default: empty.
ip_filter =
# Max Bandwidth
# -------------
# GUI Option: Maximum bandwidth in Mb/s (string)
# Set the maximum bandwidth to be consumed by the server.
# Leaving the setting blank or zero switches off bandwidth throttling.
# Default: 0.
maximumbitrate =
# ---< Advanced HTTP and system settings >------------------------------------
# HTTP Engine v2
# --------------
# GUI Option: HTTP Engine v2 (toggle)
# Default: true.
http_engine_v2 =
# Do not sleep
# ------------
# GUI Option: Prevent OS from sleeping while streaming (toggle)
# If your host server has a power-saving mode, use this option to prevent
# the server hibernating or sleeping while it is streaming data.
# Default: false.
prevents_sleep_mode = true
# GUI Option: Default renderer when automatic detection fails (selector)
# PMS can recognize many renderers automatically. Sometimes a renderer will
# connect which PMS does not recognize. This option defines which renderer PMS
# should assume.
# Default: empty, which means PMS will assume the "Unknown renderer".
renderer_default =
# GUI Option: Force default renderer (disable automatic detection) (toggle)
# By default PMS tries to automatically detect what renderers try to connect
# to it. By settings this option to true, PMS will assume any renderer that
# connects is the default renderer.
# Default: false
renderer_force_default =
# ---< Plugins >--------------------------------------------------------------
# The directory where PMS can find the plugins.
# Default: "plugins".
plugins =
# ----------------------------------------------------------------------------
# Navigation/Share Settings Screen
# ----------------------------------------------------------------------------
# ---< Thumbnails >-----------------------------------------------------------
# Generate Thumbnails
# -------------------
# GUI Option: Generate Thumbnails
# Set whether or not to generate thumbnails of media files for the client.
# Default: true.
thumbnails = true
# Thumbnail seeking position
# --------------------------
# GUI Option: Thumbnail seeking position (string)
# Amount of time (in seconds) to skip in video media before generating
# thumbnail data, designed to pass over usual black screen before movies
# start.
# Default: 60 seconds.
thumbnail_seek_pos =
# Use MPlayer for Thumbnails
# --------------------------
# GUI Option: Use MPlayer for video thumbnails (toggle)
# Whether or not to use MPlayer to generate the thumbnails for video;
# can produce better results than built-in method.
# Default: false, which will use the built-in method.
use_mplayer_for_video_thumbs = true
# DVD thumbnails
# --------------
# GUI Option: DVD ISO thumbnails (toggle)
# Choose whether or not to show thumbnails of ISO images.
# Default: false.
dvd_isos_thumbnails =
# Image thumbnails
# --------------
# GUI Option: Image thumbnails (toggle)
# Choose whether or not to show thumbnails of images.
# Default: true.
image_thumbnails =
# Album cover art
# ---------------
# GUI Option: Audio thumbnails display (selector)
# Choose how to get thumbnails for audio files (cover art), value is a
# number from the following list (equivalent to GUI dropdown order):
# 0 - Alphabetical (A-Z) - search local filesystem
# 1 - download from Amazon
# 2 - download from Discogs
# Default: 0.
audio_thumbnails_method =
# Source of video cover art
# -------------------------
# GUI Option: Alternate video cover art folder (selector)
# Specify a folder below which appropriate cover art for videos might be
# located. Providing no value (default) effectively disables video thumbnails.
# The GUI offers a file-system navigator which generates an absolute path.
# Default: empty.
alternate_thumb_folder =
# ---< Navigation/Parsing settings >------------------------------------------
# Instructs the system on how to find media and various controls on giving
# clients access to transcoding facilities and features.
# Compressed Archives
# -------------------
# GUI Option: Browse compressed archives (toggle)
# Should the system browse compressed files looking for media? Files are
# extracted only when selected for viewing.
# Supported formats: cbr, cbz, rar and zip.
# Default: false.
enable_archive_browsing =
# Hide Video settings
# -------------------
# GUI Option: Hide Video settings (toggle)
# Control visibility of the Video Settings folder on clients; contents
# of the folder allow direct editing of PMS settings for video.
# Default: false.
hidevideosettings = true
# Hide Transcode folder
# ---------------------
# GUI Option: Hide Transcode folder (toggle)
# Control visibility of the Transcode folder on clients; contents of the
# folder provide control over transcoding of video.
# Default: false.
hide_transcode_folder = true
# Transcode Folder Name
# ---------------------
# Assign a different name to the #--TRANSCODE--# folder e.g. "Subtitles" or "Languages".
# Default: the localized version of "#--TRANSCODE--#".
transcode_folder_name =
# Hide file extensions
# --------------------
# GUI Option: Hide file extensions (toggle)
# Choose whether or not to show file extensions when showing file name in
# client listings.
# Default: false.
hide_extensions =
# Hide engine names
# -----------------
# GUI Option: Hide engine names (toggle)
# Choose whether or not to show transcoding engine names for video; see
# also "Hide Transcode Folder" setting.
# Default: false.
hide_enginenames = true
# Hide non-media folders
# ----------------------
# GUI Option: Hide non-media folders (toggle)
# Choose whether or not to show folders which contain no viewable content.
# Switching this on can slow down browsing in the client (folders must be checked
# for content first before showing them); using a cache (see below) can help.
# Default: false.
hide_empty_folders =
# Show iTunes library
# -------------------
# GUI Option: Show iTunes library (toggle)
# Choose whether or not to show the iTunes library as a folder in PMS.
# Default: false.
itunes =
# Show iPhoto library
# -------------------
# GUI Option: Show iPhoto library (toggle)
# Choose whether or not to show the iPhoto library as a folder in PMS.
# Default: false.
iphoto =
# Show Aperture library
# ---------------------
# GUI Option: Show aperture library (toggle)
# Choose whether or not to show the Aperture library as a folder in PMS.
# Default: false.
aperture =
# Enable cache
# ------------
# GUI Option: Enable cache (toggle)
# Without a cache, when the client browses a folder, content is listed in
# real-time. With a cache, additional information becomes available and
# the cache can be browsed directly.
# Default: false.
usecache =
# Hide cache folder
# -----------------
# GUI Option: Hide cache folder (toggle)
# Controls whether or not the cache can be browsed directly by the client.
# Default: false.
hide_media_library_folder = true
# File ordering
# -------------
# GUI Option: File ordering (selector)
# Determines the order of listed content when a client browses a folder; the
# GUI selector generates a numeric indicator according to the following.
# 0 - Alphabetical A-Z
# 1 - By date (newest first)
# 2 - By reverse date (oldest first)
# 3 - ASCIIbetical (i.e. using ASCII code values)
# 4 - Alphanumeric (AKA natural sort e.g. "Season 2" before "Season 10")
# Default: 4.
key_sort_method =
# ---< Shared folders >-------------------------------------------------------
# Media Locations
# ---------------
# GUI Option: Shared folders dialogue (list)
# Either define a list of specific folders containing media to be shared or
# allow the system to browse the whole disk of the server. The GUI provides
# a system navigation to generate a list of folders.
# The list should contain a comma-separated list of absolute path names, or
# leave it empty to let the system find media.
# Default: empty.
folders = /home/rossvaller/media/
# ----------------------------------------------------------------------------
# Transcoder Settings
# ----------------------------------------------------------------------------
# Transcoder engines
# GUI Option: Ordered list of engines (selector)
# System generates list of available engines, list depends on host.
# Default: "mencoder,avsmencoder,tsmuxer,ffmpegvideo,ffmpegaudio,mplayeraudio,tsmuxeraudio,ffmpegwebvideo,vlcvideo,mencoderwebvideo,mplayervideodump,mplayerwebaudio,vlcaudio,ffmpegdvrmsremux,rawthumbs"
engines = tsmuxer,mencoder,ffmpegvideo,ffmpegaudio,mplayeraudio,tsmuxeraudio,ffmpegwebvideo,vlcvideo,mencoderwebvideo,mplayervideodump,mplayerwebaudio,vlcaudio,rawthumbs
# ----------------------------------------------------------------------------
# Transcoding Settings: Common settings
# ----------------------------------------------------------------------------
# Transcode buffer size
# ---------------------
# GUI Option: Transcode buffer maximum size (string)
# Size of buffer in MB before transmitting to client. Maximum value is 400.
# Default: 400.
maxvideobuffer =
# Cores for Transcoding
# ---------------------
# GUI Option: Number of cores for transcoding (selector)
# Choose the number of processor cores that should be used for transcoding.
# Default: empty, which will make PMS figure this out itself.
nbcores =
# Chapters #--TRANSCODE--# folder support
# -----------------------------------
# GUI Option: Chapters #--TRANSCODE--# folder support (toggle)
# Makes PMS create virtual chapter markers in a video file. These let
# you jump to a specific point in a video.
# Default: false.
chapter_support =
# Chapters #--TRANSCODE--# folder support interval
# --------------------------------------------
# GUI Option: Chapters #--TRANSCODE--# folder support interval (string)
# Determines the interval time in minutes for virtual chapter markers.
# Default: 5.
chapter_interval =
# ---< Audio settings >-------------------------------------------------------
# PS3 Media Server decides what to do with the audio track by checking options in the following order:
# 1. (AC3 and DTS tracks) Keep DTS track / Keep AC3 track => remuxes track as-is
# 2. (all tracks) Use LPCM transcoding => transcodes track with LPCM transport (lossless)
# 3. (all tracks) Use AC3 transcoding => transcodes track with AC3 transport (lossy)
# AC3 transcoding audio channels
# --------------
# GUI Option: Maximum audio channels (selector)
# The maximum number of channels used for AC3 transcoding.
# Do not change this value even if you use 2.0 speakers because of an MEncoder downmixing bug!
# Default: 6.
audiochannels =
# AC3 transcoding audio bitrate
# -----------------
# GUI Option: AC3 re-encoding audio bitrate (string)
# Specify the bitrate for AC3 transcoding; do not exceed the quality supported by the
# AV receiver or amplifier.
# Default: 640.
audiobitrate =
# Keep AC3 track
# ---------------
# GUI Option: Keep AC3 track (no re-encode, may cause inaudible dialog and A/V sync issues) (toggle)
# Default: true.
mencoder_remux_ac3 =
# Keep DTS track
# ------------------
# GUI Option: Keep DTS track (no re-encode, compatible with AV receiver through optical or HDMI output) (toggle)
# Default: false.
embed_dts_in_pcm = true
# Use LPCM for audio
# ---------------------------
# GUI Option: Use LPCM for audio (no re-encode) (toggle)
# Choose whether or not the Pulse Code Modulation (PCM) audio format should be
# used instead of AC3 with the MEncoder transcoding engine. Offers lossless transcoding quality but higher bitrate.
# Bandwidth requirements are about 1.5 Mbit/s for 2.0 and 4.6 Mbit/s for 5.1 audio.
# Not suitable for Wi-Fi streaming!
# Default: false.
mencoder_usepcm =
# Use LPCM only for HQ audio
# ---------------------------
# GUI Option: none
# Limit LPCM audio transcoding to high quality audio tracks (DTS, TrueHD, etc) only. Use AC3
# transcoding for others.
# Default: false.
mencoder_usepcm_for_hq_audio_only =
# Remux DVD
# ---------
# GUI Option: Remux DVD ISO video track (toggle)
# Default: true.
mencoder_remux_mpeg2 =
# ---< Video quality settings >-----------------------------------------------
# MPEG-2 options
# --------------
# GUI Option: MPEG-2 options (string)
# Sets the quality for MPEG-2 conversion; MPEG-2 is the fallback format if the client
# does not support a video format natively.
# Default: "keyint=5:vqscale=1:vqmin=2"
mencoder_encode = keyint=2:vqscale=1:vqmin=2
# ---< Misc options >---------------------------------------------------------
# Definitely disable subtitles
# ---------------------------
# GUI Option: Definitely disable subtitles (toggle)
# Default: false.
mencoder_disablesubs =
# Skip transcode for extensions
# -----------------------------
# GUI Option: Skip transcode for extensions (list)
# Do not transcode files with an extension in the list.
# Default: empty.
notranscode =
# Force transcode for extensions
# ------------------------------
# GUI Option: Force transcode for extensions (list)
# Always transcode file with an extension in the list.
# Default: empty.
forcetranscode =
# ----------------------------------------------------------------------------
# Transcoder Settings: MEncoder
# ----------------------------------------------------------------------------
# ---< Video/Audio decoder settings for MEncoder engine >---------------------
# Use Multiple cores
# ------------------
# GUI Option: Use multiple CPU cores (toggle)
# Choose whether or not to use the multicore variant of MEncoder.
# Default: empty, which lets PMS figure this out itself.
mencoder_mt =
# Skip loop filter
# ----------------
# GUI Option: Skip loop filter
# Default: false.
skiploopfilter =
# A/V sync alternative true
# -------------------------
# GUI Option: A/V sync alternative
# Default: true.
mencoder_nooutofsync =
# Use Video Scaler
# ----------------
# GUI Option: Use Video Scaler
# Default: false.
mencoder_scaler =
# GUI Option: Video scaler width
# Default: 0.
mencoder_scalex =
# GUI Option: Video scaler height
# Default: 0.
mencoder_scaley =
# Force framerate
# ---------------
# GUI Option: Force framerate
# Default: false.
mencoder_forcefps =
# Deinterlace filter
# ------------------
# GUI Option: Deinterlace filter
# Default: false.
mencoder_yadif =
# Remux videos
# ------------
# GUI Option: Remux videos
# Default: true.
mencoder_mux_compatible = false
# Codec specific parameters
# -------------------------
# GUI Option : Use application default codec parms
# Default: true.
mencoder_intelligent_sync =
# GUI Option: Codec specific parameters (text)
# Sets additional codec-specific configuration options for MEncoder.
# Default: empty.
codec_spec_script =
# ---< Specific options >-----------------------------------------------------
# Custom options
# --------------
# GUI Option: Custom options (string)
# Default: empty.
mencoder_decode =
# Audio language priority
# -----------------------
# GUI Option: Audio language priority (list)
# A comma-separated list of language codes that defines the priority for
# MEncoder when choosing audio languages, where "und" stands for "undefined".
# XXX Can be empty, which pre-empts the default value.
# Default: a localized list (e.g. "eng,fre,jpn,ger,und").
# mencoder_audiolangs =
# ---< Subtitle settings >----------------------------------------------------
# Subtitle language priority
# --------------------------
# GUI Option: Subtitle language priority (list)
# A comma-separated list of language codes that defines the priority for
# MEncoder when choosing subtitle languages, where "und" stands for "undefined".
# XXX Can be empty, which pre-empts the default value.
# Default: a localized list (e.g. "eng,fre,jpn,ger,und").
# mencoder_sublangs =
# Force subtitle language
# -----------------------
# GUI Option: Force subtitle language (string)
# XXX Can be empty, which pre-empts the default value.
# Default: the value of the language option, or "en".
# forced_sub_lang =
# Forced tags
# -----------
# GUI Option: Forced tags (string)
# The tag string that identifies the subtitle language that will be forced
# upon MEncoder.
# Default: "forced".
forced_sub_tags =
# Audio language priority
# -----------------------
# GUI Option: Audio language priority (string)
# Determine the string of audio language and subtitle language pairs
# ordered by priority for MEncoder to try to match. Audio language and
# subtitle language should be comma separated as a pair; individual pairs
# should be semicolon separated. "*" can be used to match any language.
# Subtitle language can be defined as "off" (e.g. "jpn,off;*,*").
# XXX Can be empty, which pre-empts the default value.
# Default: a localized list (usually "*,*").
# mencoder_audiosublangs =
# Codepage for non-Unicode subtitles
# ------------------
# GUI Option: Codepage for non-Unicode subtitles (string)
# The character encoding (or code page) that MEncoder should use for
# non-Unicode external subtitles.
# Default: empty (autodetect, do not force encoding with -subcp key).
mencoder_subcp =
# FriBiDi
# -------
# GUI Option: FriBiDi (toggle)
# Determine whether or not MEncoder should use FriBiDi mode, which is
# needed to display subtitles in languages that read from right to left,
# like Arabic, Farsi, Hebrew, Urdu, etc.
# Default: false.
mencoder_subfribidi =
# Subtitle font blank
# -------------------
# GUI Option: Subtitle font (string)
# GUI offers a navigator to a folder generating an absolute path.
# Default: empty.
mencoder_font = Ubuntu
# Subtitles folder blank
# ----------------------
# GUI Option: Subtitles folder (string)
# GUI offers a navigator to a folder generating an absolute path.
# Default: empty.
alternate_subs_folder =
# Use ASS/SSA styling
# -------------------
# GUI Option: Use ASS/SSA styling (toggle)
# Choose whether or not MEncoder supports ASS/SSA subtitles.
# Default: true for Windows and Mac OS X, false otherwise.
mencoder_ass =
# Enable MEncoder fontconfig support
# -------------
# GUI Option: Fontconfig/Embedded fonts (toggle)
# Default: true.
mencoder_fontconfig =
# Use embedded style
# ------------------
# GUI Option: Use embedded style (toggle)
# Default: true.
mencoder_ass_defaultstyle =
# Subtitle colour
# ---------------
# GUI Option: Subtitle colour (string)
# The integer value for the subtitle colour. GUI offers a palette to choose
# from that will generate a number. Default is empty, causing PMS to pick
# white.
# Default: empty.
subs_color = -1
# Style font scale
# ----------------
# GUI Option: Style font scale
# The font scale used for ASS subtitling.
# Default: 1.0.
mencoder_ass_scale =
# GUI Option: Styled font outline
# The outline parameter used for ASS subtitling.
# Default: 1.
mencoder_ass_outline = 2
# GUI Option: Styled font shadow
# The shadow parameter used for ASS subtitling.
# Default: 1.
mencoder_ass_shadow = 0
# GUI Option: Styled margin
# The margin used for ASS subtitling.
# Default: 10.
mencoder_ass_margin = 40
# Plain font scale
# ----------------
# GUI Option: Plain font scale
# The subfont text scale parameter used for subtitling without ASS.
# Default: 3.
mencoder_noass_scale =
# GUI Option: Plain font outline
# The subfont outline parameter used for subtitling without ASS.
# Default: 1.
mencoder_noass_outline = 4
# GUI Option: Plain font blur
# The subfont blur parameter used for subtitling without ASS.
# Default: 1.
mencoder_noass_blur =
# GUI Option: Plain margin
# The subpos parameter used for subtitling without ASS.
# Default: 2.
mencoder_noass_subpos = 13
# Load subtitles
# --------------
# GUI Option: Load subtitles
# Choose whether PMS should check for external subtitle files with the same
# name as the media (*.srt, *.sub, *.ass, etc.).
# Default: true.
autoloadsrt =
# DVD/VOB subtitle quality
# ------------------------
# GUI Option: DVD/VOB subtitle quality
# Default: 3.
mencoder_vobsub_subtitle_quality = 4
# Add borders
# -----------
# GUI Option: width
# Default: 0.
mencoder_overscan_compensation_width =
# GUI Option: height
# Default: 0.
mencoder_overscan_compensation_height =
# ----------------------------------------------------------------------------
# Transcoder Settings: Video decoder for tsMuxeR
# ----------------------------------------------------------------------------
# Force FPS from FFmpeg
# ---------------------
# GUI Option: Force FPS pased from FFmpeg in the meta file
# Default: true.
tsmuxer_forcefps =
# Mux all audio
# -------------
# GUI Option: Mux all audio tracks
# Default: false.
tsmuxer_mux_all_audiotracks =
# Audio resampling
# ----------------
# GUI Option: Automatic audio resampling (toggle)
# Default: true.
audio_resample =
# ============================================================================
# Additional settings
# ---< Active - but not settable in GUI >-------------------------------------
# Default: 850.
charsetencoding =
# Set to "true" if PMS should pass the flag "convertfps=true" to AviSynth.
# Default: true.
avisynth_convertfps =
# The template for the AviSynth script. The script string may contain the
# character "\u0001", which will be treated as newline character.
avisynth_script =
# Default: false.
transcode_block_multiple_connections =
# Default: true.
transcode_keep_first_connection =
# Default: "-threads 2 -g 1 -qscale 1 -qmin 2"
ffmpeg =
# The maximum size (in MB) that PMS should use for buffering audio.
# Default: 100.
maxaudiobuffer =
# The minimum size (in MB) that PMS should use for the streaming media buffer.
# Default: 1.
minwebbuffer =
# ---< Old deprecated options >-----------------------------------------------
# turbomode = false
# tsmuxer_preremix_ac3 = false
# ---< Binary tools paths >------------------------------------------
# Path to mencoder (absolute or relative from project.binaries.dir)
# Default: Win: win32/mencoder.exe Mac: osx/mencoder Linux: mencoder + system PATH
mencoder_path = /usr/lib/ps3mediaserver/linux/mencoder
# Path to ffmpeg (absolute or relative from project.binaries.dir)
# Default: Win: win32/ffmpeg.exe Mac: osx/ffmpeg Linux: ffmpeg + system PATH
ffmpeg_path = /usr/lib/ps3mediaserver/linux/ffmpeg
# Path to mplayer (absolute or relative from project.binaries.dir)
# Default: Win: win32/mplayer.exe Mac: osx/mplayer Linux: mplayer + system PATH
mplayer_path = /usr/lib/ps3mediaserver/linux/mplayer
# Path to tsMuxeR (absolute or relative from project.binaries.dir)
# Default: Win: win32/tsMuxeR.exe Mac: osx/tsMuxeR Linux: tsMuxeR + system PATH
tsmuxer_path = /usr/lib/ps3mediaserver/linux/tsMuxeR
# Path to dcraw (absolute or relative from project.binaries.dir)
# Default: Win: win32/dcrawMS.exe Mac: osx/dcraw Linux: dcraw + system PATH
dcraw_path = /usr/lib/ps3mediaserver/linux/dcraw
# Path to FLAC (absolute or relative from project.binaries.dir)
# Default: Win: win32/flac.exe Mac: osx/flac Linux: flac + system PATH
flac_path =
# Path to eac3to (absolute or relative from project.binaries.dir)
# Default: Win: win32/eac3to/eac3to.exe
eac3to_path =
# Path to VideoLAN (absolute or relative from project.binaries.dir)
# Default: Win: videolan/vlc.exe Mac: /Applications/VLC.app/Contents/MacOS/VLC Linux: vlc + system PATH
vlc_path =
# Path to convert (absolute or relative from project.binaries.dir)
# Default: Win: win32/convert.exe Mac: osx/convert Linux: convert + system PATH
imconvert_path =
uuid = 0fb49067-2ec1-38f6-982a-06cef0ade074