1. # dmesg
  2. [ 0.000000] Linux version 2.6.31-gentoo-r6 (root@Tool) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #4 SMP PREEMPT Sat Jan 30 18:52:07 EST 2010
  3. [ 0.000000] Command line: root=/dev/sdb3
  4. [ 0.000000] KERNEL supported cpus:
  5. [ 0.000000] Intel GenuineIntel
  6. [ 0.000000] AMD AuthenticAMD
  7. [ 0.000000] Centaur CentaurHauls
  8. [ 0.000000] BIOS-provided physical RAM map:
  9. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
  10. [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  11. [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  12. [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
  13. [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
  14. [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
  15. [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  16. [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  17. [ 0.000000] DMI 2.3 present.
  18. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
  19. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  20. [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
  21. [ 0.000000] MTRR default type: uncachable
  22. [ 0.000000] MTRR fixed ranges enabled:
  23. [ 0.000000] 00000-9FFFF write-back
  24. [ 0.000000] A0000-BFFFF uncachable
  25. [ 0.000000] C0000-C7FFF write-protect
  26. [ 0.000000] C8000-FFFFF uncachable
  27. [ 0.000000] MTRR variable ranges enabled:
  28. [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
  29. [ 0.000000] 1 disabled
  30. [ 0.000000] 2 disabled
  31. [ 0.000000] 3 disabled
  32. [ 0.000000] 4 disabled
  33. [ 0.000000] 5 disabled
  34. [ 0.000000] 6 disabled
  35. [ 0.000000] 7 disabled
  36. [ 0.000000] initial memory mapped : 0 - 20000000
  37. [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
  38. [ 0.000000] 0000000000 - 003fe00000 page 2M
  39. [ 0.000000] 003fe00000 - 003fff0000 page 4k
  40. [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 10000-13000
  41. [ 0.000000] ACPI: RSDP 00000000000f7c80 00014 (v00 Nvidia)
  42. [ 0.000000] ACPI: RSDT 000000003fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
  43. [ 0.000000] ACPI: FACP 000000003fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
  44. [ 0.000000] ACPI: DSDT 000000003fff3180 06677 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
  45. [ 0.000000] ACPI: FACS 000000003fff0000 00040
  46. [ 0.000000] ACPI: SRAT 000000003fff9900 000A0 (v01 AMD HAMMER 00000001 AMD 00000001)
  47. [ 0.000000] ACPI: MCFG 000000003fff9a00 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
  48. [ 0.000000] ACPI: APIC 000000003fff9840 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
  49. [ 0.000000] ACPI: Local APIC address 0xfee00000
  50. [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 003fff0000]
  51. [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  52. [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
  53. [ 0.000000] #2 [0001000000 - 000182bb2c] TEXT DATA BSS ==> [0001000000 - 000182bb2c]
  54. [ 0.000000] #3 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
  55. [ 0.000000] #4 [000182c000 - 000182c159] BRK ==> [000182c000 - 000182c159]
  56. [ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
  57. [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0
  58. [ 0.000000] Zone PFN ranges:
  59. [ 0.000000] DMA 0x00000010 -> 0x00001000
  60. [ 0.000000] DMA32 0x00001000 -> 0x00100000
  61. [ 0.000000] Normal 0x00100000 -> 0x00100000
  62. [ 0.000000] Movable zone start PFN for each node
  63. [ 0.000000] early_node_map[2] active PFN ranges
  64. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  65. [ 0.000000] 0: 0x00000100 -> 0x0003fff0
  66. [ 0.000000] On node 0 totalpages: 262015
  67. [ 0.000000] DMA zone: 56 pages used for memmap
  68. [ 0.000000] DMA zone: 100 pages reserved
  69. [ 0.000000] DMA zone: 3827 pages, LIFO batch:0
  70. [ 0.000000] DMA32 zone: 3528 pages used for memmap
  71. [ 0.000000] DMA32 zone: 254504 pages, LIFO batch:31
  72. [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
  73. [ 0.000000] If you got timer trouble try acpi_use_timer_override
  74. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
  75. [ 0.000000] ACPI: Local APIC address 0xfee00000
  76. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  77. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  78. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  79. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  80. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  81. [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
  82. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  83. [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
  84. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  85. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  86. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  87. [ 0.000000] ACPI: IRQ9 used by override.
  88. [ 0.000000] ACPI: IRQ14 used by override.
  89. [ 0.000000] ACPI: IRQ15 used by override.
  90. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  91. [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  92. [ 0.000000] nr_irqs_gsi: 24
  93. [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
  94. [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
  95. [ 0.000000] PERCPU: Embedded 25 pages at ffff880001837000, static data 72468 bytes
  96. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258331
  97. [ 0.000000] Kernel command line: root=/dev/sdb3
  98. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
  99. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  100. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  101. [ 0.000000] Initializing CPU#0
  102. [ 0.000000] Checking aperture...
  103. [ 0.000000] No AGP bridge found
  104. [ 0.000000] Node 0: aperture @ 91a0000000 size 32 MB
  105. [ 0.000000] Aperture beyond 4GB. Ignoring.
  106. [ 0.000000] Memory: 1023032k/1048512k available (4560k kernel code, 452k absent, 24536k reserved, 2576k data, 428k init)
  107. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  108. [ 0.000000] Preemptible RCU implementation.
  109. [ 0.000000] NR_IRQS:1280
  110. [ 0.000000] Fast TSC calibration using PIT
  111. [ 0.000000] Detected 2211.576 MHz processor.
  112. [ 0.000018] spurious 8259A interrupt: IRQ7.
  113. [ 0.000999] Console: colour VGA+ 80x25
  114. [ 0.000999] console [tty0] enabled
  115. [ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4423.15 BogoMIPS (lpj=2211576)
  116. [ 0.001171] Mount-cache hash table entries: 256
  117. [ 0.001457] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  118. [ 0.001519] CPU: L2 Cache: 512K (64 bytes/line)
  119. [ 0.001578] tseg: 0000000000
  120. [ 0.001597] CPU: Physical Processor ID: 0
  121. [ 0.001655] CPU: Processor Core ID: 0
  122. [ 0.001714] mce: CPU supports 5 MCE banks
  123. [ 0.001798] Freeing SMP alternatives: 28k freed
  124. [ 0.001901] ACPI: Core revision 20090521
  125. [ 0.012097] Setting APIC routing to flat
  126. [ 0.012607] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  127. [ 0.022884] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
  128. [ 0.022996] Booting processor 1 APIC 0x1 ip 0x6000
  129. [ 0.000999] Initializing CPU#1
  130. [ 0.000999] Calibrating delay using timer specific routine.. 4421.90 BogoMIPS (lpj=2210951)
  131. [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  132. [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
  133. [ 0.000999] CPU: Physical Processor ID: 0
  134. [ 0.000999] CPU: Processor Core ID: 1
  135. [ 0.000999] mce: CPU supports 5 MCE banks
  136. [ 0.093177] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
  137. [ 0.093725] Brought up 2 CPUs
  138. [ 0.093783] Total of 2 processors activated (8845.05 BogoMIPS).
  139. [ 0.094080] khelper used greatest stack depth: 6152 bytes left
  140. [ 0.094185] NET: Registered protocol family 16
  141. [ 0.095099] node 0 link 0: io port [1000, fffff]
  142. [ 0.095099] TOM: 0000000040000000 aka 1024M
  143. [ 0.095099] node 0 link 0: mmio [e0000000, efffffff]
  144. [ 0.095099] node 0 link 0: mmio [feb00000, fec0ffff]
  145. [ 0.095099] node 0 link 0: mmio [a0000, bffff]
  146. [ 0.095099] node 0 link 0: mmio [40000000, fed3ffff]
  147. [ 0.095099] bus: [00,ff] on node 0 link 0
  148. [ 0.095099] bus: 00 index 0 io port: [0, ffff]
  149. [ 0.095099] bus: 00 index 1 mmio: [40000000, fcffffffff]
  150. [ 0.095099] bus: 00 index 2 mmio: [feb00000, fec0ffff]
  151. [ 0.095099] bus: 00 index 3 mmio: [a0000, bffff]
  152. [ 0.095103] ACPI: bus type pci registered
  153. [ 0.095180] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  154. [ 0.095180] PCI: MCFG area at e0000000 reserved in E820
  155. [ 0.098222] PCI: Using MMCONFIG at e0000000 - efffffff
  156. [ 0.098287] PCI: Using configuration type 1 for base access
  157. [ 0.107019] bio: create slab <bio-0> at 0
  158. [ 0.108446] ACPI: EC: Look up EC in DSDT
  159. [ 0.118190] ACPI: Interpreter enabled
  160. [ 0.118252] ACPI: (supports S0 S5)
  161. [ 0.118361] ACPI: Using IOAPIC for interrupt routing
  162. [ 0.129204] ACPI: No dock devices found.
  163. [ 0.129392] ACPI: PCI Root Bridge [PCI0] (0000:00)
  164. [ 0.130040] HPET not enabled in BIOS. You might try hpet=force boot option
  165. [ 0.130118] pci 0000:00:01.1: reg 10 io port: [0xe400-0xe41f]
  166. [ 0.130126] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
  167. [ 0.130129] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
  168. [ 0.130139] pci 0000:00:01.1: PME# supported from D3hot D3cold
  169. [ 0.130201] pci 0000:00:01.1: PME# disabled
  170. [ 0.130277] pci 0000:00:02.0: reg 10 32bit mmio: [0xcd004000-0xcd004fff]
  171. [ 0.130293] pci 0000:00:02.0: supports D1 D2
  172. [ 0.130295] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  173. [ 0.130357] pci 0000:00:02.0: PME# disabled
  174. [ 0.130436] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
  175. [ 0.130456] pci 0000:00:02.1: supports D1 D2
  176. [ 0.130457] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  177. [ 0.130519] pci 0000:00:02.1: PME# disabled
  178. [ 0.130597] pci 0000:00:04.0: reg 10 io port: [0xdc00-0xdcff]
  179. [ 0.130601] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe0ff]
  180. [ 0.130604] pci 0000:00:04.0: reg 18 32bit mmio: [0xcd003000-0xcd003fff]
  181. [ 0.130617] pci 0000:00:04.0: supports D1 D2
  182. [ 0.130637] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
  183. [ 0.130660] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
  184. [ 0.130663] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
  185. [ 0.130667] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
  186. [ 0.130670] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
  187. [ 0.130673] pci 0000:00:07.0: reg 20 io port: [0xd800-0xd80f]
  188. [ 0.130677] pci 0000:00:07.0: reg 24 32bit mmio: [0xcd002000-0xcd002fff]
  189. [ 0.130698] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
  190. [ 0.130701] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
  191. [ 0.130704] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
  192. [ 0.130708] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
  193. [ 0.130711] pci 0000:00:08.0: reg 20 io port: [0xc400-0xc40f]
  194. [ 0.130714] pci 0000:00:08.0: reg 24 32bit mmio: [0xcd001000-0xcd001fff]
  195. [ 0.130747] pci 0000:00:0a.0: reg 10 32bit mmio: [0xcd000000-0xcd000fff]
  196. [ 0.130751] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb007]
  197. [ 0.130765] pci 0000:00:0a.0: supports D1 D2
  198. [ 0.130767] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
  199. [ 0.130829] pci 0000:00:0a.0: PME# disabled
  200. [ 0.130912] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
  201. [ 0.130974] pci 0000:00:0b.0: PME# disabled
  202. [ 0.131006] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
  203. [ 0.131068] pci 0000:00:0c.0: PME# disabled
  204. [ 0.131152] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
  205. [ 0.131214] pci 0000:00:0d.0: PME# disabled
  206. [ 0.131296] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
  207. [ 0.131358] pci 0000:00:0e.0: PME# disabled
  208. [ 0.131535] pci 0000:05:06.0: supports D1 D2
  209. [ 0.131536] pci 0000:05:06.0: PME# supported from D1 D2 D3hot D3cold
  210. [ 0.131599] pci 0000:05:06.0: PME# disabled
  211. [ 0.131682] pci 0000:05:07.0: reg 10 32bit mmio: [0xc9000000-0xc900ffff]
  212. [ 0.131731] pci 0000:05:0a.0: reg 10 io port: [0x8000-0x8007]
  213. [ 0.131736] pci 0000:05:0a.0: reg 14 io port: [0x8400-0x8403]
  214. [ 0.131741] pci 0000:05:0a.0: reg 18 io port: [0x8800-0x8807]
  215. [ 0.131745] pci 0000:05:0a.0: reg 1c io port: [0x8c00-0x8c03]
  216. [ 0.131750] pci 0000:05:0a.0: reg 20 io port: [0x9000-0x900f]
  217. [ 0.131754] pci 0000:05:0a.0: reg 24 32bit mmio: [0xc9018000-0xc90183ff]
  218. [ 0.131759] pci 0000:05:0a.0: reg 30 32bit mmio: [0xc8000000-0xc807ffff]
  219. [ 0.131770] pci 0000:05:0a.0: supports D1 D2
  220. [ 0.131792] pci 0000:05:0b.0: reg 10 32bit mmio: [0xc9019000-0xc90197ff]
  221. [ 0.131796] pci 0000:05:0b.0: reg 14 32bit mmio: [0xc9010000-0xc9013fff]
  222. [ 0.131822] pci 0000:05:0b.0: supports D1 D2
  223. [ 0.131824] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot
  224. [ 0.131886] pci 0000:05:0b.0: PME# disabled
  225. [ 0.132030] pci 0000:05:0c.0: reg 10 32bit mmio: [0xc9014000-0xc9017fff]
  226. [ 0.132035] pci 0000:05:0c.0: reg 14 io port: [0x9400-0x94ff]
  227. [ 0.132051] pci 0000:05:0c.0: reg 30 32bit mmio: [0xc8000000-0xc801ffff]
  228. [ 0.132065] pci 0000:05:0c.0: supports D1 D2
  229. [ 0.132067] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
  230. [ 0.132129] pci 0000:05:0c.0: PME# disabled
  231. [ 0.132206] pci 0000:00:09.0: transparent bridge
  232. [ 0.132266] pci 0000:00:09.0: bridge io port: [0x8000-0x9fff]
  233. [ 0.132269] pci 0000:00:09.0: bridge 32bit mmio: [0xc8000000-0xc9ffffff]
  234. [ 0.132272] pci 0000:00:09.0: bridge 32bit mmio pref: [0xc0000000-0xc7ffffff]
  235. [ 0.132309] pci 0000:06:08.0: reg 10 32bit mmio: [0xc0000000-0xc3ffffff]
  236. [ 0.132373] pci 0000:06:09.0: reg 10 32bit mmio: [0xc4000000-0xc7ffffff]
  237. [ 0.132443] pci 0000:05:06.0: bridge 32bit mmio pref: [0xc0000000-0xc7ffffff]
  238. [ 0.132560] pci 0000:01:00.0: reg 10 32bit mmio: [0xca000000-0xcaffffff]
  239. [ 0.132566] pci 0000:01:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff]
  240. [ 0.132573] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcb000000-0xcbffffff]
  241. [ 0.132577] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f]
  242. [ 0.132581] pci 0000:01:00.0: reg 30 32bit mmio: [0xcc000000-0xcc01ffff]
  243. [ 0.132625] pci 0000:00:0e.0: bridge io port: [0xa000-0xafff]
  244. [ 0.132628] pci 0000:00:0e.0: bridge 32bit mmio: [0xca000000-0xccffffff]
  245. [ 0.132631] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff]
  246. [ 0.132640] pci_bus 0000:00: on NUMA node 0
  247. [ 0.132647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  248. [ 0.132910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  249. [ 0.205124] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
  250. [ 0.205587] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
  251. [ 0.206194] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  252. [ 0.206652] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  253. [ 0.207119] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  254. [ 0.207652] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  255. [ 0.208119] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  256. [ 0.208652] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
  257. [ 0.209116] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  258. [ 0.209574] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  259. [ 0.210111] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  260. [ 0.210569] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
  261. [ 0.211029] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  262. [ 0.211572] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  263. [ 0.212043] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
  264. [ 0.212510] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  265. [ 0.213070] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
  266. [ 0.213384] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
  267. [ 0.213696] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
  268. [ 0.214021] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
  269. [ 0.214271] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
  270. [ 0.214594] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
  271. [ 0.214986] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
  272. [ 0.215391] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
  273. [ 0.215773] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
  274. [ 0.216147] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
  275. [ 0.216551] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
  276. [ 0.216933] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
  277. [ 0.217325] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
  278. [ 0.217739] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
  279. [ 0.218140] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
  280. [ 0.218533] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
  281. [ 0.218985] SCSI subsystem initialized
  282. [ 0.219077] libata version 3.00 loaded.
  283. [ 0.219077] usbcore: registered new interface driver usbfs
  284. [ 0.219077] usbcore: registered new interface driver hub
  285. [ 0.219077] usbcore: registered new device driver usb
  286. [ 0.219997] PCI: Using ACPI for IRQ routing
  287. [ 0.237983] pnp: PnP ACPI init
  288. [ 0.238748] ACPI: bus type pnp registered
  289. [ 0.244352] pnp: PnP ACPI: found 15 devices
  290. [ 0.244352] ACPI: ACPI bus type pnp unregistered
  291. [ 0.244352] system 00:01: ioport range 0x4000-0x407f has been reserved
  292. [ 0.244964] system 00:01: ioport range 0x4080-0x40ff has been reserved
  293. [ 0.245026] system 00:01: ioport range 0x4400-0x447f has been reserved
  294. [ 0.245088] system 00:01: ioport range 0x4480-0x44ff has been reserved
  295. [ 0.245150] system 00:01: ioport range 0x4800-0x487f has been reserved
  296. [ 0.245211] system 00:01: ioport range 0x4880-0x48ff has been reserved
  297. [ 0.245276] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
  298. [ 0.245338] system 00:02: ioport range 0x800-0x87f has been reserved
  299. [ 0.245399] system 00:02: ioport range 0x290-0x297 has been reserved
  300. [ 0.245466] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
  301. [ 0.245530] system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
  302. [ 0.245593] system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
  303. [ 0.245655] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
  304. [ 0.245717] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
  305. [ 0.245779] system 00:0e: iomem range 0x3fff0000-0x3fffffff could not be reserved
  306. [ 0.245875] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
  307. [ 0.245964] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
  308. [ 0.246026] system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved
  309. [ 0.246122] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
  310. [ 0.246218] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
  311. [ 0.246281] system 00:0e: iomem range 0xfefff000-0xfeffffff has been reserved
  312. [ 0.246343] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
  313. [ 0.246406] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
  314. [ 0.246468] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
  315. [ 0.251155] pci 0000:05:0a.0: BAR 6: address space collision on of device [0xc8000000-0xc807ffff]
  316. [ 0.251254] pci 0000:05:0c.0: BAR 6: address space collision on of device [0xc8000000-0xc801ffff]
  317. [ 0.251378] pci 0000:05:06.0: PCI bridge, secondary bus 0000:06
  318. [ 0.251438] pci 0000:05:06.0: IO window: disabled
  319. [ 0.251500] pci 0000:05:06.0: MEM window: disabled
  320. [ 0.251561] pci 0000:05:06.0: PREFETCH window: 0xc0000000-0xc7ffffff
  321. [ 0.251624] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
  322. [ 0.251685] pci 0000:00:09.0: IO window: 0x8000-0x9fff
  323. [ 0.251746] pci 0000:00:09.0: MEM window: 0xc8000000-0xc9ffffff
  324. [ 0.251808] pci 0000:00:09.0: PREFETCH window: 0xc0000000-0xc7ffffff
  325. [ 0.251869] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
  326. [ 0.251930] pci 0000:00:0b.0: IO window: disabled
  327. [ 0.251975] Switched to high resolution mode on CPU 0
  328. [ 0.251978] pci 0000:00:0b.0: MEM window: disabled
  329. [ 0.252046] pci 0000:00:0b.0: PREFETCH window: disabled
  330. [ 0.252107] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
  331. [ 0.252163] Switched to high resolution mode on CPU 1
  332. [ 0.252171] pci 0000:00:0c.0: IO window: disabled
  333. [ 0.252232] pci 0000:00:0c.0: MEM window: disabled
  334. [ 0.252292] pci 0000:00:0c.0: PREFETCH window: disabled
  335. [ 0.252353] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
  336. [ 0.252413] pci 0000:00:0d.0: IO window: disabled
  337. [ 0.252473] pci 0000:00:0d.0: MEM window: disabled
  338. [ 0.252533] pci 0000:00:0d.0: PREFETCH window: disabled
  339. [ 0.252594] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
  340. [ 0.252655] pci 0000:00:0e.0: IO window: 0xa000-0xafff
  341. [ 0.252716] pci 0000:00:0e.0: MEM window: 0xca000000-0xccffffff
  342. [ 0.252777] pci 0000:00:0e.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff
  343. [ 0.252880] pci 0000:00:09.0: setting latency timer to 64
  344. [ 0.252887] pci 0000:00:0b.0: setting latency timer to 64
  345. [ 0.252891] pci 0000:00:0c.0: setting latency timer to 64
  346. [ 0.252895] pci 0000:00:0d.0: setting latency timer to 64
  347. [ 0.252899] pci 0000:00:0e.0: setting latency timer to 64
  348. [ 0.252903] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  349. [ 0.252905] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
  350. [ 0.252908] pci_bus 0000:05: resource 0 io: [0x8000-0x9fff]
  351. [ 0.252910] pci_bus 0000:05: resource 1 mem: [0xc8000000-0xc9ffffff]
  352. [ 0.252912] pci_bus 0000:05: resource 2 pref mem [0xc0000000-0xc7ffffff]
  353. [ 0.252914] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
  354. [ 0.252916] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
  355. [ 0.252919] pci_bus 0000:06: resource 2 pref mem [0xc0000000-0xc7ffffff]
  356. [ 0.252921] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
  357. [ 0.252923] pci_bus 0000:01: resource 1 mem: [0xca000000-0xccffffff]
  358. [ 0.252925] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xbfffffff]
  359. [ 0.252965] NET: Registered protocol family 2
  360. [ 0.253117] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
  361. [ 0.253681] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
  362. [ 0.256588] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  363. [ 0.258079] TCP: Hash tables configured (established 131072 bind 65536)
  364. [ 0.258145] TCP reno registered
  365. [ 0.258357] NET: Registered protocol family 1
  366. [ 0.260107] microcode: no support for this CPU vendor
  367. [ 0.260518] Intel AES-NI instructions are not detected.
  368. [ 0.263685] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  369. [ 0.270317] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  370. [ 0.270999] msgmni has been set to 1999
  371. [ 0.272759] alg: No test for fcrypt (fcrypt-generic)
  372. [ 0.276037] alg: No test for stdrng (krng)
  373. [ 0.276158] alg: No test for stdrng (ansi_cprng)
  374. [ 0.276254] io scheduler noop registered
  375. [ 0.276379] io scheduler cfq registered (default)
  376. [ 0.288075] pci 0000:00:00.0: Found enabled HT MSI Mapping
  377. [ 0.288139] pci 0000:00:0b.0: Found disabled HT MSI Mapping
  378. [ 0.288203] pci 0000:00:00.0: Found enabled HT MSI Mapping
  379. [ 0.288270] pci 0000:00:0b.0: Linking AER extended capability
  380. [ 0.288363] pci 0000:00:00.0: Found enabled HT MSI Mapping
  381. [ 0.288426] pci 0000:00:0c.0: Found disabled HT MSI Mapping
  382. [ 0.288491] pci 0000:00:00.0: Found enabled HT MSI Mapping
  383. [ 0.288552] pci 0000:00:0c.0: Linking AER extended capability
  384. [ 0.288648] pci 0000:00:00.0: Found enabled HT MSI Mapping
  385. [ 0.288711] pci 0000:00:0d.0: Found disabled HT MSI Mapping
  386. [ 0.288776] pci 0000:00:00.0: Found enabled HT MSI Mapping
  387. [ 0.288837] pci 0000:00:0d.0: Linking AER extended capability
  388. [ 0.288937] pci 0000:00:00.0: Found enabled HT MSI Mapping
  389. [ 0.289010] pci 0000:00:0e.0: Found disabled HT MSI Mapping
  390. [ 0.289075] pci 0000:00:00.0: Found enabled HT MSI Mapping
  391. [ 0.289136] pci 0000:00:0e.0: Linking AER extended capability
  392. [ 0.289219] pci 0000:01:00.0: Boot video device
  393. [ 0.289442] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
  394. [ 0.289448] pcieport-driver 0000:00:0b.0: setting latency timer to 64
  395. [ 0.289611] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
  396. [ 0.289615] pcieport-driver 0000:00:0c.0: setting latency timer to 64
  397. [ 0.289767] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
  398. [ 0.289770] pcieport-driver 0000:00:0d.0: setting latency timer to 64
  399. [ 0.289924] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X
  400. [ 0.289928] pcieport-driver 0000:00:0e.0: setting latency timer to 64
  401. [ 0.305137] Linux agpgart interface v0.103
  402. [ 0.305203] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
  403. [ 0.305299] Hangcheck: Using get_cycles().
  404. [ 0.305824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  405. [ 0.305925] ACPI: Power Button [PWRF]
  406. [ 0.306097] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  407. [ 0.306194] ACPI: Power Button [PWRB]
  408. [ 0.306532] processor LNXCPU:00: registered as cooling_device0
  409. [ 0.306687] processor LNXCPU:01: registered as cooling_device1
  410. [ 0.307696] thermal LNXTHERM:01: registered as thermal_zone0
  411. [ 0.307763] ACPI: Thermal Zone [THRM] (40 C)
  412. [ 0.307951] [drm] Initialized drm 1.1.0 20060810
  413. [ 0.309594] loop: module loaded
  414. [ 0.310082] sata_sil 0000:05:0a.0: version 2.4
  415. [ 0.310452] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
  416. [ 0.310524] sata_sil 0000:05:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
  417. [ 0.310648] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
  418. [ 0.310869] scsi0 : sata_sil
  419. [ 0.311274] scsi1 : sata_sil
  420. [ 0.311520] scsi2 : sata_sil
  421. [ 0.311746] scsi3 : sata_sil
  422. [ 0.311967] ata1: SATA max UDMA/100 mmio m1024@0xc9018000 tf 0xc9018080 irq 19
  423. [ 0.312073] ata2: SATA max UDMA/100 mmio m1024@0xc9018000 tf 0xc90180c0 irq 19
  424. [ 0.312169] ata3: SATA max UDMA/100 mmio m1024@0xc9018000 tf 0xc9018280 irq 19
  425. [ 0.312269] ata4: SATA max UDMA/100 mmio m1024@0xc9018000 tf 0xc90182c0 irq 19
  426. [ 0.312504] sata_nv 0000:00:07.0: version 3.5
  427. [ 0.312943] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
  428. [ 0.313036] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
  429. [ 0.313200] sata_nv 0000:00:07.0: setting latency timer to 64
  430. [ 0.313279] scsi4 : sata_nv
  431. [ 0.313518] scsi5 : sata_nv
  432. [ 0.313822] ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
  433. [ 0.313885] ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
  434. [ 0.314346] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
  435. [ 0.314411] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
  436. [ 0.314558] sata_nv 0000:00:08.0: setting latency timer to 64
  437. [ 0.314660] scsi6 : sata_nv
  438. [ 0.314893] scsi7 : sata_nv
  439. [ 0.315201] ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22
  440. [ 0.315268] ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22
  441. [ 0.315659] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
  442. [ 0.315725] skge 0000:05:0c.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
  443. [ 0.315848] skge 1.13 addr 0xc9014000 irq 17 chip Yukon-Lite rev 9
  444. [ 0.316308] skge eth0: addr 00:13:d4:44:0e:07
  445. [ 0.316456] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
  446. [ 0.316854] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
  447. [ 0.316919] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
  448. [ 0.317027] forcedeth 0000:00:0a.0: setting latency timer to 64
  449. [ 0.317119] nv_probe: set workaround bit for reversed mac addr
  450. [ 0.617040] ata1: SATA link down (SStatus 0 SControl 310)
  451. [ 0.617044] ata5: SATA link down (SStatus 0 SControl 300)
  452. [ 0.769029] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  453. [ 0.784796] ata7.00: ATA-7: WDC WD2500AAKS-00SBA0, 12.01B01, max UDMA/133
  454. [ 0.784860] ata7.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
  455. [ 0.790710] ata7.00: configured for UDMA/133
  456. [ 0.829522] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 9, addr 00:13:d4:44:02:58
  457. [ 0.829621] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
  458. [ 0.830303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  459. [ 0.830717] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
  460. [ 0.830785] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
  461. [ 0.830895] ehci_hcd 0000:00:02.1: setting latency timer to 64
  462. [ 0.830898] ehci_hcd 0000:00:02.1: EHCI Host Controller
  463. [ 0.831077] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
  464. [ 0.831213] ehci_hcd 0000:00:02.1: debug port 1
  465. [ 0.831275] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
  466. [ 0.831296] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
  467. [ 0.837014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
  468. [ 0.837207] usb usb1: configuration #1 chosen from 1 choice
  469. [ 0.837349] hub 1-0:1.0: USB hub found
  470. [ 0.837418] hub 1-0:1.0: 10 ports detected
  471. [ 0.837603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  472. [ 0.837981] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
  473. [ 0.838069] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
  474. [ 0.838176] ohci_hcd 0000:00:02.0: setting latency timer to 64
  475. [ 0.838179] ohci_hcd 0000:00:02.0: OHCI Host Controller
  476. [ 0.838309] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  477. [ 0.838421] ohci_hcd 0000:00:02.0: irq 23, io mem 0xcd004000
  478. [ 0.892113] usb usb2: configuration #1 chosen from 1 choice
  479. [ 0.892231] hub 2-0:1.0: USB hub found
  480. [ 0.892298] hub 2-0:1.0: 10 ports detected
  481. [ 0.892453] uhci_hcd: USB Universal Host Controller Interface driver
  482. [ 0.892709] usbcore: registered new interface driver usblp
  483. [ 0.892770] Initializing USB Mass Storage driver...
  484. [ 0.892883] usbcore: registered new interface driver usb-storage
  485. [ 0.892944] USB Mass Storage support registered.
  486. [ 0.893119] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  487. [ 0.893180] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  488. [ 0.893727] serio: i8042 KBD port at 0x60,0x64 irq 1
  489. [ 0.893957] mice: PS/2 mouse device common for all mice
  490. [ 0.894327] rtc_cmos 00:04: RTC can wake from S4
  491. [ 0.894478] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  492. [ 0.894559] rtc0: alarms up to one year, y3k, 242 bytes nvram
  493. [ 0.894665] i2c /dev entries driver
  494. [ 0.894963] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
  495. [ 0.895152] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
  496. [ 0.895313] Linux video capture interface: v2.00
  497. [ 0.895543] usbcore: registered new interface driver uvcvideo
  498. [ 0.895605] USB Video Class driver (v0.1.0)
  499. [ 0.896077] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  500. [ 0.896178] cpuidle: using governor ladder
  501. [ 0.896238] cpuidle: using governor menu
  502. [ 0.898141] usbcore: registered new interface driver hiddev
  503. [ 0.898279] usbcore: registered new interface driver usbhid
  504. [ 0.898341] usbhid: v2.6:USB HID core driver
  505. [ 0.898498] Advanced Linux Sound Architecture Driver Version 1.0.20.
  506. [ 0.899093] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
  507. [ 0.899157] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
  508. [ 0.899286] Intel ICH 0000:00:04.0: setting latency timer to 64
  509. [ 0.920590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  510. [ 0.922275] ata2: SATA link down (SStatus 0 SControl 310)
  511. [ 1.211025] intel8x0_measure_ac97_clock: measured 50653 usecs (2488 samples)
  512. [ 1.211091] intel8x0: clocking to 46907
  513. [ 1.211877] ALSA device list:
  514. [ 1.211936] #0: NVidia CK804 with ALC850 at irq 22
  515. [ 1.211996] Netfilter messages via NETLINK v0.30.
  516. [ 1.212089] nf_conntrack version 0.5.0 (8191 buckets, 32764 max)
  517. [ 1.212635] ctnetlink v0.93: registering with nfnetlink.
  518. [ 1.213472] ip_tables: (C) 2000-2006 Netfilter Core Team
  519. [ 1.213568] TCP cubic registered
  520. [ 1.213628] NET: Registered protocol family 17
  521. [ 1.214033] RPC: Registered udp transport module.
  522. [ 1.214093] RPC: Registered tcp transport module.
  523. [ 1.226271] ata3: SATA link down (SStatus 0 SControl 310)
  524. [ 1.356020] usb 2-7: new full speed USB device using ohci_hcd and address 2
  525. [ 1.501154] usb 2-7: configuration #1 chosen from 1 choice
  526. [ 1.531029] ata4: SATA link down (SStatus 0 SControl 310)
  527. [ 1.834019] ata6: SATA link down (SStatus 0 SControl 300)
  528. [ 1.834206] scsi 6:0:0:0: Direct-Access ATA WDC WD2500AAKS-0 12.0 PQ: 0 ANSI: 5
  529. [ 1.834675] sd 6:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  530. [ 1.834810] sd 6:0:0:0: [sda] Write Protect is off
  531. [ 1.834870] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
  532. [ 1.834889] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  533. [ 1.835128] sda:
  534. [ 1.835443] sd 6:0:0:0: Attached scsi generic sg0 type 0
  535. [ 1.838232] sda1
  536. [ 1.838645] sd 6:0:0:0: [sda] Attached SCSI disk
  537. [ 2.289028] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  538. [ 2.292208] ata8.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
  539. [ 2.292279] ata8.00: 488397168 sectors, multi 1: LBA48
  540. [ 2.295217] ata8.00: configured for UDMA/133
  541. [ 2.295363] scsi 7:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
  542. [ 2.295746] sd 7:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  543. [ 2.295872] sd 7:0:0:0: [sdb] Write Protect is off
  544. [ 2.295932] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  545. [ 2.295949] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  546. [ 2.296146] sdb:
  547. [ 2.296369] sd 7:0:0:0: Attached scsi generic sg1 type 0
  548. [ 2.300857] sdb1 sdb2 sdb3
  549. [ 2.301400] sd 7:0:0:0: [sdb] Attached SCSI disk
  550. [ 2.335782] EXT3-fs: mounted filesystem with writeback data mode.
  551. [ 2.335863] VFS: Mounted root (ext3 filesystem) readonly on device 8:19.
  552. [ 2.335971] Freeing unused kernel memory: 428k freed
  553. [ 2.336540] kjournald starting. Commit interval 5 seconds
  554. [ 2.838193] khelper used greatest stack depth: 5904 bytes left
  555. [ 2.838199] input: Tempest Habu Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input3
  556. [ 2.838521] generic-usb 0003:1532:00FB.0001: input,hidraw0: USB HID v1.00 Mouse [Tempest Habu Mouse] on usb-0000:00:02.0-7/input0
  557. [ 3.122771] consoletype used greatest stack depth: 5816 bytes left
  558. [ 3.183648] stty used greatest stack depth: 4584 bytes left
  559. [ 4.451071] udev: starting version 146
  560. [ 4.930034] udev: renamed network interface eth1 to eth0
  561. [ 4.956728] ath_hal: module license 'Proprietary' taints kernel.
  562. [ 4.956733] Disabling lock debugging due to kernel taint
  563. [ 4.957817] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
  564. [ 4.979217] udev: renamed network interface eth0_rename to eth1
  565. [ 4.992783] wlan: 0.9.4.1
  566. [ 5.229808] ath_pci: 0.9.4.1
  567. [ 5.229863] ath_pci 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
  568. [ 5.918206] ath_rate_sample: 1.2 (0.9.4.1)
  569. [ 5.918996] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
  570. [ 5.919016] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  571. [ 5.919024] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  572. [ 5.919029] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
  573. [ 5.919033] wifi0: mac 7.9 phy 4.5 radio 5.6
  574. [ 5.919037] wifi0: Use hw queue 1 for WME_AC_BE traffic
  575. [ 5.919039] wifi0: Use hw queue 0 for WME_AC_BK traffic
  576. [ 5.919040] wifi0: Use hw queue 2 for WME_AC_VI traffic
  577. [ 5.919042] wifi0: Use hw queue 3 for WME_AC_VO traffic
  578. [ 5.919043] wifi0: Use hw queue 8 for CAB traffic
  579. [ 5.919045] wifi0: Use hw queue 9 for beacons
  580. [ 5.929853] wifi0: Atheros 5212: mem=0xc9000000, irq=17
  581. [ 5.991195] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
  582. [ 5.991209] nvidia 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
  583. [ 5.991217] nvidia 0000:01:00.0: setting latency timer to 64
  584. [ 5.991455] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009
  585. [ 6.561645] EXT3 FS on sdb3, internal journal
  586. [ 8.021468] Adding 506036k swap on /dev/sdb2. Priority:-1 extents:1 across:506036k
  587. [ 9.235152] find used greatest stack depth: 4344 bytes left
  588. [ 52.293255] eth0: no link during initialization.
  589.