Linux version 2.6.27.29-CRI (builder@pld) (gcc version 4.3.3 20090211 (release) (PLD-Linux) ) #1 Sat Aug 15 18:01:33 CEST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.5 present.
last_pfn = 0xfff0 max_arch_pfn = 0x100000
kernel direct mapping tables up to fff0000 @ 7000-d000
RAMDISK: 0fa1d000 - 0ffceabb
255MB LOWMEM available.
mapped low ram: 0 - 0fff0000
low ram: 00000000 - 0fff0000
bootmap 00001000 - 00003000
(7 early reservations) ==> bootmem [0000000000 - 000fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000100000 - 0000297e38] TEXT DATA BSS ==> [0000100000 - 0000297e38]
#2 [000fa1d000 - 000ffceabb] RAMDISK ==> [000fa1d000 - 000ffceabb]
#3 [0000298000 - 000029a000] INIT_PG_TABLE ==> [0000298000 - 000029a000]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#6 [0000001000 - 0000003000] BOOTMAP ==> [0000001000 - 0000003000]
found SMP MP-table at [c009fff0] 0009fff0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0000fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0000fff0
On node 0 totalpages: 65423
free_area_init_node: node 0, pgdat c024c81c, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 60944 pages, LIFO batch:15
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID: VBOXCPU
MPTABLE: Product ID: VirtualBox
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
I/O APIC #1 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at 20000000 (gap: 10000000:effc0000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64911
Kernel command line: initrd=initrd32 root=/dev/ram0 ramdisk_size=35840 init=/linuxrc cri=src=cd,media=cd BOOT_IMAGE=vmlinuz32
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available
Marking TSC unstable due to could not calculate TSC khz
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 251528k/262080k available (1042k kernel code, 9860k reserved, 298k data, 152k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
vmalloc : 0xd0800000 - 0xfffb7000 ( 759 MB)
lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
.init : 0xc0252000 - 0xc0278000 ( 152 kB)
.data : 0xc0204b45 - 0xc024f3e8 ( 298 kB)
.text : 0xc0100000 - 0xc0204b45 (1042 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop... 3915.77 BogoMIPS (lpj=7831552)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
Spurious LAPIC timer interrupt on cpu 0
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
net_namespace: 440 bytes
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfc080, last bus=0
PCI: Using configuration type 1 for base access
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: 0000:00:01.1 reg 20 io port: [d000, d00f]
PCI: 0000:00:02.0 reg 10 32bit mmio: [e0000000, e07fffff]
PCI: 0000:00:03.0 reg 10 32bit mmio: [f0000000, f001ffff]
PCI: 0000:00:03.0 reg 18 io port: [d010, d017]
PCI: 0000:00:04.0 reg 10 io port: [d020, d03f]
PCI: 0000:00:04.0 reg 14 32bit mmio: [f0400000, f07fffff]
PCI: 0000:00:04.0 reg 18 32bit mmio: [f0800000, f0803fff]
PCI: 0000:00:06.0 reg 10 32bit mmio: [f0804000, f0804fff]
PCI: 0000:00:0b.0 reg 10 32bit mmio: [f0805000, f0805fff]
PCI: 0000:00:14.0 reg 10 io port: [d100, d1ff]
PCI: 0000:00:14.0 reg 14 32bit mmio: [f0820000, f083ffff]
PCI: 0000:00:14.0 reg 18 32bit mmio: [f0840000, f085ffff]
pci 0000:00:01.0: PIIX/ICH IRQ router [8086/7000]
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 5830k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
msgmni has been set to 503
io scheduler noop registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
brd: module loaded
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard as /class/input/input0
EISA: Probing bus 0 at eisa.0
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
RAMDISK: Lzma image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
Freeing unused kernel memory: 152k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.12
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 1024000 sectors, multi 128: LBA
ata1.01: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.01: 1024000 sectors, multi 128: LBA
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset iso8859-1
Unable to load NLS charset iso8859-1
ISO 9660 Extensions: RRIP_1991A
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0: setting latency timer to 64
e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:8e:c1:e0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 A0: Capabilities={Initiator}
mptbase: ioc0: Initiating recovery
mptbase: ioc0: ERROR - Enable Diagnostic mode FAILED! (00h)
mptbase: ioc0: WARNING - NOT READY!
mptbase: ioc0: WARNING - Cannot recover rc = -1!
mptbase: ioc0: WARNING - Firmware Reload FAILED!