USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
UKB: USB keyboard connected to console
I: Displaying splash screen...OK
I: MAC address: 10:e2:d5:00:00:7c
I: Press Q or ESC to abort boot
I: Aborted boot on user request
BIOS> serialboot
I: Attempting serial firmware loading
sL5DdSMmkekro
[FLTERM] Received firmware download request from the device.
[FLTERM] Uploading kernel (61636 bytes)...
[FLTERM] Upload complete (9.2KB/s).
[FLTERM] Booting the device.
[FLTERM] Done.
*** Milkymist One automated tests starting...
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
*** a pressed
Images CRC:
Checking : standby.fpg CRC passed (got c58e8905)
Checking : soc-rescue.fpg CRC passed (got 30dcc535)
Checking : bios-rescue.bin(CRC) CRC passed (got be28be63)
Checking : splash-rescue.raw CRC passed (got e8ff824f)
Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a)
Checking : soc.fpg CRC passed (got 3a31e737)
Checking : bios.bin(CRC) CRC passed (got 86e23684)
Checking : splash.raw CRC passed (got 978f860c)
Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a)
[ PASSED ]
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
����7666&&$$$
libHPDMC SDRAM initialization runtime
(c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3.
Version 1.0
Initialization sequence completed.
Autocalibration OK, testing memory...
All SDRAM initialization completed, boot continuing.
VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0
VGA: DDC I2C bus initialized
VGA: mode set to 640x480
MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org
(c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, version 3 of the License.
I: BIOS CRC passed (86e23684)
BRD: SoC 1.0 on Milkymist One (PCB revision 2)
BRD: Mem. card : Yes
BRD: AC'97 : Yes
BRD: PFPU : Yes
BRD: TMU : Yes
BRD: Ethernet : Yes
BRD: FML meter : Yes
BRD: Video in : Yes
BRD: MIDI : Yes
BRD: DMX : Yes
BRD: IR : Yes
BRD: USB : Yes
BRD: Memtester : No
TMU: texture mapping unit initialized
USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
UKB: USB keyboard connected to console
I: Displaying splash screen...OK
I: MAC address: 10:e2:d5:00:00:7c
I: Press Q or ESC to abort boot
I: Aborted boot on user request
BIOS> serialboot
I: Attempting serial firmware loading
sL5DdSMmkekro
[FLTERM] Received firmware download request from the device.
[FLTERM] Uploading kernel (61636 bytes)...
[FLTERM] Upload complete (8.9KB/s).
[FLTERM] Booting the device.
[FLTERM] Done.
*** Milkymist One automated tests starting...
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
*** a pressed
Images CRC:
Checking : standby.fpg CRC passed (got c58e8905)
Checking : soc-rescue.fpg CRC passed (got 30dcc535)
Checking : bios-rescue.bin(CRC) CRC passed (got be28be63)
Checking : splash-rescue.raw CRC passed (got e8ff824f)
Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a)
Checking : soc.fpg CRC passed (got 3a31e737)
Checking : bios.bin(CRC) CRC passed (got 86e23684)
Checking : splash.raw CRC passed (got 978f860c)
Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a)
[ PASSED ]
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
�����66&&&"$$
libHPDMC SDRAM initialization runtime
(c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3.
Version 1.0
Initialization sequence completed.
Autocalibration OK, testing memory...
All SDRAM initialization completed, boot continuing.
VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0
VGA: DDC I2C bus initialized
VGA: mode set to 640x480
MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org
(c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, version 3 of the License.
I: BIOS CRC passed (86e23684)
BRD: SoC 1.0 on Milkymist One (PCB revision 2)
BRD: Mem. card : Yes
BRD: AC'97 : Yes
BRD: PFPU : Yes
BRD: TMU : Yes
BRD: Ethernet : Yes
BRD: FML meter : Yes
BRD: Video in : Yes
BRD: MIDI : Yes
BRD: DMX : Yes
BRD: IR : Yes
BRD: USB : Yes
BRD: Memtester : No
TMU: texture mapping unit initialized
USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
UKB: USB keyboard connected to console
I: Displaying splash screen...OK
I: MAC address: 10:e2:d5:00:00:7c
I: Press Q or ESC to abort boot
I: Aborted boot on user request
BIOS> serialboot
I: Attempting serial firmware loading
sL5DdSMmkekro
[FLTERM] Received firmware download request from the device.
[FLTERM] Uploading kernel (61636 bytes)...
[FLTERM] Upload complete (8.8KB/s).
[FLTERM] Booting the device.
[FLTERM] Done.
*** Milkymist One automated tests starting...
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
*** a pressed
Images CRC:
Checking : standby.fpg CRC passed (got c58e8905)
Checking : soc-rescue.fpg CRC passed (got 30dcc535)
Checking : bios-rescue.bin(CRC) CRC passed (got be28be63)
Checking : splash-rescue.raw CRC passed (got e8ff824f)
Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a)
Checking : soc.fpg CRC passed (got 3a31e737)
Checking : bios.bin(CRC) CRC passed (got 86e23684)
Checking : splash.raw CRC passed (got 978f860c)
Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a)
[ PASSED ]
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
����7626&&"$$$
libHPDMC SDRAM initialization runtime
(c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3.
Version 1.0
Initialization sequence completed.
Autocalibration OK, testing memory...
All SDRAM initialization completed, boot continuing.
VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0
VGA: DDC I2C bus initialized
VGA: mode set to 640x480
MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org
(c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, version 3 of the License.
I: BIOS CRC passed (86e23684)
BRD: SoC 1.0 on Milkymist One (PCB revision 2)
BRD: Mem. card : Yes
BRD: AC'97 : Yes
BRD: PFPU : Yes
BRD: TMU : Yes
BRD: Ethernet : Yes
BRD: FML meter : Yes
BRD: Video in : Yes
BRD: MIDI : Yes
BRD: DMX : Yes
BRD: IR : Yes
BRD: USB : Yes
BRD: Memtester : No
TMU: texture mapping unit initialized
USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
UKB: USB keyboard connected to console
I: Displaying splash screen...OK
I: MAC address: 10:e2:d5:00:00:7c
I: Press Q or ESC to abort boot
I: Aborted boot on user request
BIOS> serialboot
I: Attempting serial firmware loading
sL5DdSMmkekro
[FLTERM] Received firmware download request from the device.
[FLTERM] Uploading kernel (61636 bytes)...
[FLTERM] Upload complete (9.0KB/s).
[FLTERM] Booting the device.
[FLTERM] Done.
*** Milkymist One automated tests starting...
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
*** a pressed
Images CRC:
Checking : standby.fpg CRC passed (got c58e8905)
Checking : soc-rescue.fpg CRC passed (got 30dcc535)
Checking : bios-rescue.bin(CRC) CRC passed (got be28be63)
Checking : splash-rescue.raw CRC passed (got e8ff824f)
Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a)
Checking : soc.fpg CRC passed (got 3a31e737)
Checking : bios.bin(CRC) CRC passed (got 86e23684)
Checking : splash.raw CRC passed (got 978f860c)
Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a)
[ PASSED ]
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
�����662""$$$
libHPDMC SDRAM initialization runtime
(c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3.
Version 1.0
Initialization sequence completed.
Autocalibration OK, testing memory...
All SDRAM initialization completed, boot continuing.
VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0
VGA: DDC I2C bus initialized
VGA: mode set to 640x480
MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org
(c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, version 3 of the License.
I: BIOS CRC passed (86e23684)
BRD: SoC 1.0 on Milkymist One (PCB revision 2)
BRD: Mem. card : Yes
BRD: AC'97 : Yes
BRD: PFPU : Yes
BRD: TMU : Yes
BRD: Ethernet : Yes
BRD: FML meter : Yes
BRD: Video in : Yes
BRD: MIDI : Yes
BRD: DMX : Yes
BRD: IR : Yes
BRD: USB : Yes
BRD: Memtester : No
TMU: texture mapping unit initialized
USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
UKB: USB keyboard connected to console
I: Displaying splash screen...OK
I: MAC address: 10:e2:d5:00:00:7c
I: Press Q or ESC to abort boot
I: Aborted boot on user request
BIOS> serialboot
I: Attempting serial firmware loading
sL5DdSMmkekro
[FLTERM] Received firmware download request from the device.
[FLTERM] Uploading kernel (61636 bytes)...
[FLTERM] Upload complete (8.8KB/s).
[FLTERM] Booting the device.
[FLTERM] Done.
*** Milkymist One automated tests starting...
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
*** a pressed
Images CRC:
Checking : standby.fpg CRC passed (got c58e8905)
Checking : soc-rescue.fpg CRC passed (got 30dcc535)
Checking : bios-rescue.bin(CRC) CRC passed (got be28be63)
Checking : splash-rescue.raw CRC passed (got e8ff824f)
Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a)
Checking : soc.fpg CRC passed (got 3a31e737)
Checking : bios.bin(CRC) CRC passed (got 86e23684)
Checking : splash.raw CRC passed (got 978f860c)
Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a)
[ PASSED ]
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
�����626"&"$$
libHPDMC SDRAM initialization runtime
(c) Copyright 2010 Sebastien Bourdeauducq, released under GNU LGPL version 3.
Version 1.0
Initialization sequence completed.
Autocalibration OK, testing memory...
All SDRAM initialization completed, boot continuing.
VGA: framebuffers at 0x440215c0 0x441a15c0 0x443215c0
VGA: DDC I2C bus initialized
VGA: mode set to 640x480
MILKYMIST(tm) v1.0 BIOS http://www.milkymist.org
(c) Copyright 2007, 2008, 2009, 2010, 2011 Sebastien Bourdeauducq
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, version 3 of the License.
I: BIOS CRC passed (86e23684)
BRD: SoC 1.0 on Milkymist One (PCB revision 2)
BRD: Mem. card : Yes
BRD: AC'97 : Yes
BRD: PFPU : Yes
BRD: TMU : Yes
BRD: Ethernet : Yes
BRD: FML meter : Yes
BRD: Video in : Yes
BRD: MIDI : Yes
BRD: DMX : Yes
BRD: IR : Yes
BRD: USB : Yes
BRD: Memtester : No
TMU: texture mapping unit initialized
USB: loading Navre firmware
USB: starting host controller
USB: HC: softusb-input v1.0
UKB: USB keyboard connected to console
I: Displaying splash screen...OK
I: MAC address: 10:e2:d5:00:00:7c
I: Press Q or ESC to abort boot
I: Aborted boot on user request
BIOS> serialboot
I: Attempting serial firmware loading
sL5DdSMmkekro
[FLTERM] Received firmware download request from the device.
[FLTERM] Uploading kernel (61636 bytes)...
[FLTERM] Upload complete (9.3KB/s).
[FLTERM] Booting the device.
[FLTERM] Done.
*** Milkymist One automated tests starting...
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB
*** a pressed
Images CRC:
Checking : standby.fpg CRC passed (got c58e8905)
Checking : soc-rescue.fpg CRC passed (got 30dcc535)
Checking : bios-rescue.bin(CRC) CRC passed (got be28be63)
Checking : splash-rescue.raw CRC passed (got e8ff824f)
Checking : flickernoise.fbi(rescue)(CRC) CRC passed (got aa12a56a)
Checking : soc.fpg CRC passed (got 3a31e737)
Checking : bios.bin(CRC) CRC passed (got 86e23684)
Checking : splash.raw CRC passed (got 978f860c)
Checking : flickernoise.fbi(CRC) CRC passed (got aa12a56a)
[ PASSED ]
*** Select a test category below, or hit ENTER to run all tests:
a: Images
b: SDRAM
c: GPIO
d: VGA
e: Memory card
f: Audio
g: Ethernet
h: Video input
i: MIDI
j: DMX512
k: Infrared
l: USB